Stable Anthropometric Priors

Hand anthropometry supports protective-glove design, but existing measurement methods often require trained operators, specialized hardware, or manual landmarking. We present HandAnthro, which estimates 44 projected hand dimensions from a smartphone photograph of a palm-up hand on US letter-size paper. The pipeline reconstructs wrist-occluded paper boundaries for rectification, whitens non-hand pixels, and refines 41 anthropometry-specific landmarks from a fine-tuned You Only Look Once (YOLO) pose model using image-specific geometry and contours. Controlled evaluation comprised 720 captures from 45 held-out participants, each contributing 16 images across two smartphones, two backgrounds, two angles, and two nominal illumination settings. HandAnthro produced complete outputs for 704 captures (97.8%); among these, mean absolute error (MAE) was 3.80 mm per dimension against two trained operators' caliper measurements. Regional MAEs were 2.48 mm for non-thumb fingers, 6.04 mm for thumbs, and 6.17 mm for palm and wrist. In a researcher-assisted mobile-app pilot, automated batch processing returned all 44 dimensions for 260 of 268 retained, researcher-screened firefighter images (97.0%). A descriptive, unpaired comparison with an independent national firefighter reference yielded a mean absolute difference of 2.40 mm across 28 sex-by-dimension group-mean contrasts. These results characterize controlled measurement performance and researcher-assisted field feasibility for future distributed hand-anthropometry studies.

We develop inference for manifold-valued population minimizers when each observation belongs to a different participant and only locally private messages reach the analyst. The method releases randomized tangent gradients and combines them through Riemannian stochastic approximation and Polyak-Ruppert averaging. Directly inserting a private data surrogate into a nonlinear loss can shift its population target, whereas conditional centring of the released gradient preserves the first-order equation. We introduce symmetric-pair regression (SPR) to estimate the asymptotic variance from the same private messages used for point estimation, without holding out participants or requesting a second release. We prove the central limit theorem and consistency of the fully transcript-based sandwich covariance and intrinsic Wald region under local differential privacy. Simulations across various statistical problems and manifolds support the predicted decrease in estimation error and near-nominal coverage under moderate privacy. An application to NHANES anthropometric data illustrates private estimation of a leading body-size direction and its uncertainty.

3D body scanning has become an important tool in healthcare applications because of its rapid and non-invasive nature. While smartphone-based photogrammetric reconstruction provide a low-cost and accessible alternative to commercial 3D body scanners, their performance for whole-body scanning remains insufficiently validated. Thus, we designed this study to comprehensively validate the photogrammetric 3D scanning application by evaluating automatically extracted whole-body measurements and longitudinal body-shape monitoring. We evaluated a representative application, PolyCam, against the commercial depth-sensor-based Fit3D ProScanner using 144 pregnant participants scanned longitudinally throughout pregnancy. We designed an automatic circumference extraction pipeline to get measurements at four anatomical landmarks from paired 3D scans. A linear mixed-effects model was used to evaluate scanner effects and longitudinal body-shape changes. Measurement consistency was assessed using repeated PolyCam scans and tape measurements on a rigid mannequin. PolyCam demonstrated strong agreement with Fit3D, with average biases below 16 mm, intraclass correlation coefficients above 0.8, and Pearson correlation coefficients above 0.9 across all landmarks. Both systems captured comparable longitudinal body-shape changes. Mannequin experiments showed mean biases below 3.5 mm and no significant differences from tape measurements. These findings support smartphone photogrammetry as a potential accessible alternative to commercial body scanners and applicable for longitudinal 3D body-shape assessment.

Radar-based human pose estimation has focused on improving learning algorithms while representing the body as unconstrained keypoint coordinates. We address the underexplored dimension of anatomical fidelity by integrating a full-body skeletal model into a differentiable, end-to-end trainable radar-based pose estimation framework, in which the pose network is supervised through forward kinematics while subject-specific geometry is fitted beforehand. Subject-specific body segment proportions are predicted from radar point cloud features to scale a biomechanical skeleton. A motion prediction network maps temporal radar sequences to generalized coordinates, and differentiable forward kinematics converts predicted joint angles into 3D positions. A contact classification loss encourages physically plausible foot-ground interaction. Under leave-one-subject-out cross-validation on 11 healthy participants performing rehabilitation exercises, the framework achieves 6.456 +/- 1.759 cm mean per-joint position error (MPJPE), 8.083 +/- 0.884 degrees mean per-joint angle error (MPJAE), 0.935 +/- 0.009 contact classification F1, and 3.4 +/- 1.3 % scaling error. This proof-of-concept study demonstrates the feasibility of recovering interpretable biomechanical descriptors from a single low-cost radar sensor in a controlled laboratory setting, a prerequisite for future clinical motion analysis.

Translating unstructured clinical prescriptions into patient-specific foot orthoses (FOs) is hindered by a semantic-physical misalignment: high-level clinical intent is not mapped deterministically onto the 3D geometric parameters of the orthosis, and existing design workflows remain dependent on manual expertise with no instantaneous biomechanical validation. We present TANS-FO, a research prototype-a modular pipeline with closed-loop feedback for computational design automation of customized FOs, not a clinically validated therapeutic device. A Text-Aligned Neural Surrogate (TANS) uses cross-attention to project clinical-text embeddings onto a continuous lattice-density field, while a Graph Neural Network (GNN) surrogate predicts plantar stress in real time as a substitute for Finite Element Analysis (FEA). The framework is anchored on the open-access PicoFoot-5K anthropometric database (5,230 subjects; 30+ anatomical parameters). Under standardized quasi-static loading, the GNN surrogate agrees with an Abaqus reference solver (R^2 = 0.94), and the full pipeline synthesizes manufacturing-ready lattice insoles within minutes. On the Male 18-40 cohort, the proposed system attains a surrogate-predicted peak-pressure reduction of 34.7% over parametric CAD, with a fit error of 0.42 mm. Separately, an exploratory feasibility observation (n = 12; 2-week follow-up; no control group) using VAS pain reporting indicates short-term comfort improvement (VAS 6.4 -> 2.1), but this data is explicitly classified as preliminary observational evidence only-not evidence of clinical efficacy.

Accurate fetal birth weight (FBW) estimation shortly before delivery is clinically valuable yet challenging due to its reliance on operator expertise, particularly in low-resource settings. To reduce this reliance, we study near-term birth-weight regression from blind-sweep ultrasound (US) videos acquired within 48 hours prior to delivery, with post-delivery weighing as ground truth. Accordingly, we propose a foundation model-driven key anatomy frame selection framework that enables accurate FBW regression despite the absence of plane constraints in blind sweeps. Our highlights are as follows: (1) We believe this is the first work to estimate FBW using blind-sweep US videos, enabling operator-independent assessment. (2) An Anatomy-Guided Frame Selection module equipped with a vision-language foundation model is proposed for keyframe collection in unconstrained sweeps. (3) A Redundancy-Aware Feature Compression module is designed to compress frame features while preserving task-relevant information, alleviating temporal redundancy. Extensively validated on prospectively collected data from 839 patients, our method achieves an MAE of 161.3 g, with 90.23% and 100% of cases falling within 10% and 15% absolute percentage error, outperforming typical Hadlock estimation and strong competitors. Codes are available at https://github.com/ouleoule/BlindSweep-EBW.

Accurate metric-space hand pose estimation (HPE) is essential for immersive human-computer interaction and robotics. However, most existing methods predict poses in a root-relative coordinate system and cannot estimate the hand in absolute metric scale. In this work, we observe that the intrinsic proportional relationships among human hand bones encode stable anthropometric priors that implicitly correlate with the overall metric size of the hand. Leveraging this insight, we present ScaleHP, an end-to-end one-stage hand pose estimation framework that bypasses fragile extrinsic depth modules to recover the hand in metric space. ScaleHP employs a transformer-based decoder with a novel scale token to fuse multi-scale morphological and appearance features. By solving for metric coordinates through a perspective-constrained least-squares approach, we achieve high-precision pose estimation in the camera coordinate system. ScaleHP delivers state-of-the-art performance, including 35.8 CS-MPJPE on FreiHand and 4.6/5.9 PA-MPJPE on DexYCB and HO3Dv3. These results demonstrate that internal biological constraints significantly reduce relative geometry and absolute metric errors, offering a robust solution for generalized, real-world hand tracking.

Contactless body measurement technologies are becoming increasingly significant for smart health monitoring, digital health applications, and remote patient assessment. Traditional anthropometric measurements typically necessitate physical contact and trained personnel, which may constrain scalability in remote healthcare settings. In this study, we introduce a depth camera-based framework for estimating human body measurements utilizing 3D point cloud data. An Orbbec Astra 2 depth camera was employed to capture RGB images, depth maps, and 3D point clouds of participants. The captured point cloud was processed using Python-based tools, including Open3D, NumPy, and OpenCV, to segment the human body from the background. Key anthropometric measurements, such as height and arm span, were computed. The measurements were obtained through a combination of spatial filtering and landmark selection on the 3D point cloud, followed by the projection of the computed measurements onto the corresponding RGB image using camera intrinsic parameters. In addition to linear measurements, the approximate body volume and visible surface area were estimated using voxel-based occupancy analysis and mesh-based surface reconstruction methods. The experimental results from a single depth capture demonstrated that accurate body measurements and geometric estimates could be obtained from depth camera data without physical contact. This study provides a foundation for future real-time systems that integrate depth sensing with intelligent health monitoring and generative AI models for smart healthcare applications.

Body shape and circumferences are clinically informative biomarkers for risk stratification, including measures such as waist to hip ratio, limb and trunk girths, yet conventional tools such as manual tape measures and optical scanners often require undressing and sustained poses. These demands slow workflows, compromise dignity, and exclude many older adults and people with limited mobility. To make measurement fast and contactless, we leverage millimeter-wave (mmWave) radar, which preserves privacy and operates through typical clothing, enabling quick full-body acquisition. In this work, we present a new optimization-based framework to recover 3D human shape and extract a comprehensive set of anthropometric measurements from volumetric mmWave data. Our method introduces a weighted registration pipeline that fits a parametric body model (SMPL) directly to the noisy mmWave point cloud. The core of our contribution is a vertex-weighting strategy that modulates a Chamfer energy function for reliable surface alignment and noise elimination. We further stabilize the fit by incorporating a foot-ground plane constraint and pose priors, optimizing directly for the SMPL parameters. Together, these components enable a fast, privacy preserving workflow that delivers high fidelity body shape and measurements through clothing without cameras or disrobing and with minimal cooperation, supporting frequent risk oriented assessments in clinics and care facilities for patients of all ages and mobility levels.

Objective: Stage-wise workflows that separate model scaling and inverse kinematics can induce morphology-posture compensation, resulting in anatomically inconsistent yet numerically acceptable solutions, especially in weakly observed directions. We present SmoCap, a leakage-resistant canonicalization framework that estimates morphology and posture jointly in each local trust-region quadratic program (QP) within a sparse control subspace. Methods: SmoCap solves a constrained trust-region QP with analytical proxy-mapped pose and scale Jacobians. The low dimensional proxy map stabilizes weakly observed directions and drives coordinated structures. An optional pre-solve provides warm starts in difficult configurations. The framework is evaluated using cohort fluoroscopy knee motion, anthropometric ground truth, and extreme yoga sequences. Results: SmoCap achieved 2.9 degree knee flexion RMSE against fluoroscopy, and a pooled anthropometric endpoint error around 3%. In the leakage audit against segment wise scaling, SmoCap also reduced marker RMSE, FE error, and anthropometric endpoint error. Proxy coupling preserved expressive and coordinated spine motion with marginal fitting error increase (+0.14 mm, +0.6%) against baseline models in yoga ablation. Median marker RMSE was around 20 mm, and median runtime was 0.204-0.332 ms/frame, achieved with consistently 2-3 iterations. Conclusion: SmoCap provides an externally validated unified coupling-aware scale-pose framework, making externally consistent motion canonicalization practical at dataset scale.

Computed tomography (CT) metal artifact reduction (MAR) aims to reduce the severe streaking artifacts induced by metallic implants and other high-density objects. Effective MAR generally requires both accurate artifact localization and artifact removal. Sinogram-domain methods can exploit explicit geometric cues, such as metal traces, to identify metal-corrupted measurements, while requiring raw projection data, which is often unavailable in clinical and practical scenarios. Image-domain methods are more flexible and widely applicable, yet they usually lack comparable geometric guidance, limiting their ability to localize artifacts and leading to suboptimal results. To address this limitation, we propose GraphMAR, a geometry-aware learning framework for explicit artifact identification and spatially adaptive MAR in the image domain. The key idea is to introduce graph-based geometric modeling as an image-domain analogue of sinogram metal traces. Specifically, we first construct a geometric graph from the metal mask and derive a geometric density graph that coarsely localizes artifact-prone regions according to inter-implant geometry. We then design GraphMoE, a graph-routed mixture-of-experts module that builds a polar-coordinate artifact graph in feature space and adaptively routes different experts to different spatial regions for MAR. By aligning the learned routing maps with the geometric density graph, GraphMAR provides explicit and interpretable artifact localization while enabling region-adaptive artifact reduction. Experiments on both simulated and real-world datasets demonstrate that GraphMAR achieves superior MAR performance compared with existing methods. To the best of our knowledge, this is the first work to introduce graph-based modeling for CT MAR and to enable explicit artifact identification in the image domain, improving both restoration quality and interpretability.

Body composition assessment (BCA) provides detailed information about the distribution of different tissue types in the body, enabling more precise characterization of individuals than BMI or weight alone. Consistent and frequent BCA would be valuable for personalized medicine, but the gold standard methods for BCA, such as CT and MRI, are only practical for opportunistic monitoring of patients with clinical indications for imaging and are not suitable for routine use in the general population. Here, we consider an imaging modality which is not currently used in medical applications: millimeter wave (mmWave) radar. Commonly used in security settings, mmWave scans enable fast, non-intrusive, and privacy-preserving reconstruction of full body shape without the need to remove clothing. To demonstrate the feasibility of fast and convenient BCA from mmWave scans, we present a method for BCA value regression using a multi-task learning strategy that leverages synthetic mmWave-like point clouds derived from clinical imaging and parametric human models. We evaluate the model on a pilot cohort of real mmWave scans with bioimpedance-derived body fat measurements, supporting the feasibility of estimating VAT and body fat percentage (BFP) from mmWave data acquired through clothing in a standing posture. We find that the model can predict VAT and BFP with a mean absolute error of 1.0 L and 3.2%, respectively, demonstrating the potential of mmWave scanning for routine BCA in a wide range of settings.

Parametric models of the human head are essential tools traditionally used in computer vision and graphics for animation, rendering, and reconstruction. More recently, they serve as crucial conditioning signals within generative large vision models, allowing for tight spatial control of generated imagery. However, existing publicly available models are typically limited in anatomical scope, modeling only outer geometry while ignoring intra-oral and ocular structures, and frequently suffer from reduced geometric quality stemming from low-fidelity input datasets. In this report we introduce a new parametric model dubbed Generative aNthropometric Model (GNM), named as a homophone of the human genome. GNM encompasses the head, face, neck, eyeballs, teeth, and tongue, and it is built on an extensive database of high-resolution 3D scans combined with high-quality anatomy specific artist-made samples. This report details the data provenance, the model architecture including the specialized sub-models for the ocular and intra-oral structures, and shows its SotA performance on fitting target 3D face scans. To foster community innovation, the complete GNM framework is made publicly available.