Tactile Sensors

Slip detection is fundamental to dexterous manipulation, yet existing systems often lack precise characterization of detection latency and cross-platform generalization. We present SlipSense, a multimodal tactile slip-detection framework built on TacV5, a compact sensor integrating a $32 \times 32$ piezoresistive array operating at 240 Hz and a 3-axis MEMS accelerometer operating at 8 kHz. The piezoresistive array captures spatial pressure distributions, while the accelerometer captures friction-induced vibrations, providing complementary slip cues. The framework performs modality-specific encoding, intra-sensor fusion, and cross-modal attention with causal temporal prediction at 240 Hz. Experiments on a dataset of 1.4 million frames spanning 37 objects demonstrate the complementarity of the two modalities. SlipSense achieves 96.7% Macro F1 with a false-positive rate below 1.6%, detecting 76% of slip events within 23.1 ms. When trained solely on UMI data, SlipSense generalizes zero-shot to a Tesollo dexterous hand, transferring across unseen objects, distinct sensor units, and robotic platforms without retraining.

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

Advances in tactile sensing have made contact-rich perception possible, accelerating progress in robotic manipulation, material understanding, and embodied interaction. However, because optical design, elastomer mechanics, and imaging geometry differ substantially across tactile sensors, models trained on known sensor types can suffer an abrupt performance collapse on unknown sensors. To address this problem, we propose the Brain-Inspired Few-Shot Tactile Adaptation (BIFTA) framework; it draws on the brain's rapid sensory adaptation mechanism to adapt a frozen encoder to an unknown tactile sensor from a small labeled support set. BIFTA preserves pretrained representations through dual-view statistical memory, constructs support-conditioned spectral graphs to repair sensor-dependent feature neighborhoods, and applies uncertainty-gated recurrent propagation to strengthen reliable cross-query evidence. Extensive benchmarks across three tactile datasets show that BIFTA substantially improves adaptation to unknown sensors: with only 10% labeled target data on SITR, it raises mean Sparsh accuracy from 6.86% for the frozen source classifier to 87.09%, exceeding the strongest implemented prior comparison by 47.22 percentage points, and these gains generalize across datasets, pretrained backbones, and tactile tasks. These results validate BIFTA for data-efficient adaptation to unknown tactile sensors and offer a promising route toward tactile models that transfer across heterogeneous hardware.

TacClip is a minimally encumbering wearable device for recording fingertip deformation caused by contact forces and vibrations. It can be combined with vision- or glove-based hand tracking systems that leave the fingertips uncovered and provides a measure of dynamic contact interactions, while leaving the finger pads exposed so that the user retains natural sensitivity to texture, friction, temperature, and fine surface features. The signal is produced by a Fiber Bragg Grating (FBG) embedded on a small plastic clip mounted over the fingernail. Optionally, for use with vision-based tracking, additional FBGs on polyimide strips can complement camera-based pose estimation. In finger pressing tests, TacClip estimates the force magnitude with typical errors below $0.5~\mathrm{N}$ over a $0$--$8~\mathrm{N}$ range. In tests of cloth handling and tape edge finding, we show that it captures the vibrations and dynamic events generated during exploratory sliding. With no electronics, TacClip can also be used submerged in water, while preserving bare finger contact.

We present a system of two wearable pneumatic haptic devices that supports continuous, closed-loop, bidirectional tactile interaction at perceptually relevant force and temporal scales. A single device can contain up to twelve pressure sensing channels connected to textile-based pneumatic pouches. Each channel in a device can be used as a sensor, an actuator, or both. As an actuator with integrated sensing, the channel generates stable skin indentation through local closed-loop control. As a sensor, a channel can be mounted (or worn) on any surface, including on a robot gripper or on the human body, and used to measure touch interactions with the environment or a human user. A distributed architecture supports sustained pressure output, rapid dynamic response, and wireless pairing of identical devices in a system to transmit and reproduce tactile pressure signals in real time. Device-level characterization demonstrates force bandwidth exceeding 30 Hz, rapid and well-damped step responses, and extended pressure retention compared to prior compact pneumatic platforms. Human studies show that pressure-based fingertip feedback enables discrimination of force and stiffness, improves teleoperated manipulation by reducing applied pressures by up to 23.1% and task duration by up to 27.4%, and lowers subjective mental workload by 18.8%, particularly under visually constrained conditions. By unifying tactile sensing and haptic feedback within a single pneumatic modality, the device provides a practical foundation for bidirectional touch interaction in teleoperation.

Automated inspection of small industrial components, including sub-centimetre-scale parts where defects are geometry-driven and poorly resolved by standard optical cameras, calls for sensing modalities that can directly capture fine surface geometry. Vision-based tactile sensors address this need by converting contact imprints into high-resolution image-like data compatible with existing deep-learning pipelines, yet their effective use for industrial anomaly detection (AD) remains largely unexplored. This work systematically evaluates unsupervised AD methods on a real tactile dataset covering five genuine industrial components acquired with a GelSight Mini sensor mounted on a collaborative robot. Four feature-embedding methods, SPADE, PaDiM, FAPM, and InReaCh, are compared under three validations explicitly motivated by the deployment constraints of contact-based sensing: a Good Fraction analysis establishing the minimum number of nominal contacts for stable performance, directly bounded by gel wear since every acquisition degrades the soft interface; a cross-position evaluation assessing generalization across different contact locations observing the same recurring surface pattern; and a low- versus high-resolution comparison evaluating the cost-benefit of higher-resolution tactile acquisition. Overall, this systematic benchmarking study provides practical guidance for researchers and practitioners adopting vision-based tactile sensing for industrial AD and shows how this modality can serve as a viable alternative for industrial quality-control tasks.

Tactile sensing is essential for physical interaction in robotics and human--machine systems. However, combining rich tactile information with compact hardware, low cost, and low computational overhead remains challenging. This work presents SpectraTac, a compact, camera-free optical tactile sensor that combines active red--green--blue (RGB) illumination with spatially distributed color sensing. Contact deforms a compliant transparent elastomer and modulates its internal light field, producing spatially differentiated changes in color and intensity. Three distributed color sensors capture these responses as low-dimensional spatio-spectral features, avoiding cameras, imaging optics, and high-dimensional image processing. The device measures 19.2 mm in diameter and 4 mm in height, with a material cost below USD~5. A data-driven decoding framework simultaneously estimates three-dimensional (3D) force and the contact region from the optical measurements. For 3D force prediction, the sensor achieved mean absolute errors (MAEs) of 0.161, 0.164, and 0.429 N along the x-, y-, and z-axes, respectively. The nine-region contact-classification accuracy was 99.9%. We further evaluated real-time 3D force tracking and contact-region-based human--machine interaction through an interactive control task. These results indicate that distributed color-resolved optical sensing offers a compact, low-cost alternative to camera-based tactile sensing for robotics, wearable sensing, and interactive systems.

Delicate manipulation often involves transient and subtle collisions between a grasped object and the environment. While the human hand localizes these contacts effortlessly thanks to superior tactile sensitivity, robotic systems often lack the requisite resolution to acquire the information necessary for motion planning, resulting in clumsy manipulation or even task failure. Here, we propose transient extrinsic contact detection and ranging (TECDAR), a simple yet fast and efficient method for detecting and ranging extrinsic contact of grasped objects. Our design of gripper tips employs dynamic tactile sensing leveraging a single 2.5$\times$3 mm 6D inertial measurement unit. The sensor captures sub-millisecond tip deformations at a 7 kHz sampling rate, but operating on a data stream of only 84 KB/s. High bandwidth and compact data size enable the system to rapidly detect and localize contact between grasped objects and their surroundings. Specifically, fusing tactile data with robot pose via an extended Kalman filter enables fast and precise localization of extrinsic contact, reaching millimeter-level accuracy within 180 ms. Experimental results demonstrate that the system achieves an average localization accuracy of approximately 7,mm in both line-contact and point-contact localization tasks. Furthermore, this near-instantaneous localization enables the robot to rectify its trajectory on a millisecond scale, facilitating precise tool manipulation and enhanced perception of complex environments purely through tactile exploration and mapping. We envision such techniques advancing the future of robotics across domains requiring delicate manipulation, including precision assembly, surgical assistance, and autonomous exploration in touch-dominant environments. Project page: humitlab.github.io/TECDAR/

Visuotactile sensors reconstruct dense contact geometry from measured surface gradients, but host-based processing increases power consumption and introduces data-transfer delays and variable scheduling latency, limiting the sensing and response speed of robotic systems. To address these limitations, we implement a near-sensor computing framework that includes a spectral Poisson solver as a fully streaming hardware pipeline. The computational core logic has an estimated power consumption of 347 mW and achieves high throughput without data-dependent branching or iterative convergence, thereby providing deterministic latency. Operating at 166 MHz, the pipeline produces the first depth value of each 128x128 frame 35,107 cycles after receiving the first input pixel, corresponding to a fixed latency of 0.211 ms. Across 15 contact geometries, the reconstructed depths differ from a double-precision reference by 0.17 % of the peak contact depth. On-chip decisions based on these reconstructions close a robot protective reflex loop in 28.3 +/- 4.9 ms, compared with 169.9 +/- 27.8 ms for an equivalent host-based loop using the same actuator. These results demonstrate that near-sensor reconstruction can provide accurate, energy-efficient, and deterministic tactile geometry on timescales suitable for rapid robotic contact responses.

Ubiquitous companion robots offer a promising avenue for immediate anxiety relief in children, yet their effectiveness relies on the ability to monitor physiological states continuously and unobtrusively. Current solutions often depend on external wearables, which impose usability barriers and limit the robot's autonomy. This paper investigates the integration of an embedded photoplethysmography (PPG) sensor directly into a pocket-sized companion robot, AffectaPocket, to enable self-contained heart rate monitoring during tactile interaction. We address the significant challenge of motion artifacts inherent in handheld usage by implementing a two-stage filtering pipeline that utilizes an onboard Inertial Measurement Unit (IMU) to reject high-variance segments and a confidence-based smoothing algorithm for recovery periods. We evaluated the system against a commonly used wrist worn sensor in a Within-Subjects Study with 26 participants. Our results demonstrate that the filtering strategy significantly reduced the Mean Absolute Percentage Error and achieved statistical equivalence to the ground truth measurements (p<0.05). Analysis of short-duration interactions shows that the sensor requires stability over longer periods to converge.

Resistive pressure arrays are the cheapest and most widely shipped tactile sensors, yet tactile representation learning has concentrated on optical sensors that image a deforming gel. We present Tactus, an open model that answers text queries from pressure data alone: on the STAG benchmark (27 objects, held-out recordings), it reaches 0.771 +/- 0.062 top-1 over four runs (top-3 0.935), matching, and at best exceeding, the dataset's supervised closed-set CNN at 0.76, with no trained classifier head. The recipe is small-data: 187 training recordings, masked-autoencoder pretraining on 144k unlabeled same-sensor frames, and the sensor's own calibration affine, which recovered more accuracy than every architecture change combined. The released model's errors concentrate in a few contact-ambiguous classes, are uncorrelated with text-target geometry (Spearman rho <= 0.05 over 702 class pairs), and survive paraphrased and even bare-name queries within one point; two diverse frames recover 89% of eight-frame accuracy. Failures are reported with equal precision: cross-sensor pretraining pooling gave no gain, vision co-training degraded touch, and a mis-normalized input pipeline silently discarded 97% of the sensor's dynamic range while producing plausible intermediate results. Weights, code, and the memory layer the model plugs into are released openly.

Whole-body tactile sensing is a prerequisite for humanoids that operate in contact-rich human environments, but conventional taxel arrays scale poorly with surface area, wiring complexity, and robot-specific curvature. We present a conformal electrical impedance tomography tactile skin fabricated through a geometry-adaptable additive-manufacturing workflow. A flexible conductive TPU layer forms a continuous sensing domain, while contact-induced coupling with conductive patches produces boundary voltage changes that are reconstructed using a one-step Gauss-Newton EIT solver. We first characterize the electromechanical design space of the layered structure and show that low-resistance contact-enhancement patches and a porous conductive TPU sensing layer improve sensitivity while preserving printability. We then validate contact localization on a planar prototype, a curved U-shaped prototype, and a qualitative iCub-face-shaped geometry. The curved sensor achieves a mean localization error of 6 mm over 18 contact positions without supervised post-processing. These results suggest that additively manufactured tomographic skins can reduce the morphology-specific redesign burden for humanoid tactile coverage and provide a practical route toward large-area contact sensing for human-centered deployment.

Human-centric data collection is emerging as a significant paradigm for robot skill acquisition, but seamlessly integrating low-cost, scalable tactile sensing systems that capture fine-grained fingertip interactions without compromising natural operation remains a key challenge. This reduces the reliability of human-to-robot transfer in contact-rich tasks. In this work, we present TacPrint, a wearable fingertip tactile sensor, where protrusions on the inner surface of the silicone skin are aligned one-to-one with 24 capacitive taxels to enable localized capacitive responses. A real-to-sim-to-real pipeline estimates a 35 $\times$ 26 contact-depth map from 24-channel capacitive signals. Against simulation-generated labels, the model achieved a contact-region RMSE of 0.223 $\pm$ 0.161 mm, a weighted-centroid error of 1.213 $\pm$ 2.379 pixels, and an IoU of 0.829 $\pm$ 0.169. With measured capacitive inputs, the network-predicted depth evaluated at the guide-calibrated contact center showed a mean absolute error of 0.085 $\pm$ 0.057 mm across all 40 controlled trials, while the mean contact-position error was 0.250 $\pm$ 0.208 mm across the 37 trials whose reference contact regions were not truncated by the sensing boundary. In human-to-robot replay, tactile-guided compensation increased grasping and wiping success rates from 0% to 91.67% and 90%, respectively. In closed-loop grasping, dense-depth feedback achieved success rates of 87.5% over all tested positions and 85% under edge-contact conditions, compared with 67.5% and 45% for raw-taxel feedback.

Realistic palpation training requires reliable rendering of soft tissue stiffness changes in real time, which is difficult to achieve with conventional simulators. This paper presents a compact, variable-stiffness tactile interface (VSTaI) based on vacuum-induced jamming of 3D-printed structured fabrics. A vacuum-sealed fabric layer is sandwiched between two silicone layers, and stiffness is tuned by regulating internal pressure. Four fabric patterns with different geometric parameters were fabricated and evaluated using force-indentation tests under atmospheric and vacuum conditions. Across the tested pattern and geometry combinations, vacuum jamming increased stiffness significantly, producing an effective modulus from sub-megapascal to megapascal levels. Specifically, one configuration exhibited a stiffness increase of up to 140% under the jammed state. Circular chainmail patterns provided the most spatially uniform distribution of tactile stiffness, while denser geometries reached higher peak stiffness. VSTaI was also shown to exhibit excellent conformability to the underlying geometry. These results support structured-fabric jamming as a practical approach for shape-conformable, tunable-stiffness displays aimed at physical examination training.

Curved tactile fingertips for dexterous manipulation must resolve fine contact geometry, distinguish normal and tangential loads, and capture transient signals. Existing curved vision-based tactile sensors struggle to combine accurate 3D reconstruction, three-axis force estimation, and high-speed processing in a compact form. This article presents FasTac, a curved vision-based tactile sensor integrating multispectral photometric stereo, dynamic-convolution force estimation, and hardware acceleration on a field-programmable gate array (FPGA). Single-image-sensor simultaneous multispectral imaging provides spatially aligned observations for robust surface normal estimation, followed by boundary-prior fast Poisson depth reconstruction. HyperForce uses position-aware dynamic convolution to model the spatially nonuniform mechanical response of curved elastomers and estimate three-axis forces. The complete image-to-normal-force pipeline is deployed on an FPGA. Experiments show that near-infrared (NIR) illumination and the boundary prior decrease depth mean absolute error (MAE) from 0.2730 mm to 0.0415 mm; HyperForce achieves normalized mean absolute error (NMAE) values of 2.74% and 2.39% for normal and shear forces, respectively; and FPGA deployment shortens processing latency from 3.26 ms on the GPU to 1.09 ms. Multi-object reconstruction, feedback grasping, and vibration measurement validate fine geometric perception, stable force feedback, and dynamic contact sensing.

Tactile gloves digitize contact and force during hand-object interactions, enabling robotics applications in dexterous manipulation, teleoperation, and learning from demonstration. To preserve hand dexterity and capture the nuances of natural interactions, these gloves and the integrated tactile sensors are designed to be soft, flexible, and comfortable. However, such flexible sensors are sensitive not only to contact forces but also unavoidably to hand pose changes, resulting in pose-related artifacts (PRAs). PRAs are especially problematic in the low-force range, resulting in misdetections or late-onset detections of contact, which raises the minimum detectable force (MDF) of the glove. In this work, we characterize the PRAs in relation to pose and force. Building on these insights, we introduce a glove-agnostic algorithmic framework that leverages hand pose information, which is increasingly available, to mitigate PRAs without glove modifications. Our pose-aware force estimation model augments tactile-to-force pipelines with a residual prediction branch that explicitly accounts for pose-induced sensor deformations. We validate our approach across 3 glove designs and 15 users, reducing MDF by 10.4%, 12.2%, and 18.3%, with consistent improvements across all evaluated metrics. This method provides a practical path to improving the usability of tactile gloves in data collection and diverse robotic applications.

Robot-assisted minimally invasive surgery (RMIS) offers major benefits over open and conventional laparoscopic procedures, yet it still lacks tactile feedback for palpation while operating under strict requirements to preserve reliable vision for navigation and safety. In practice, visual feedback is indispensable, and tactile solutions that cannot coexist with vision are difficult to translate into RMIS tools. To address both needs, we introduce MVP-Tac, a compact, vision-based tactile sensor that provides co-located vision and tactile sensing. MVP-Tac uses reflective photoelastic imaging: a thin photoelastic elastomer produces stress-dependent interferograms under contact that are captured by an embedded camera through a miniaturized reflective polariscope. A semi-transparent membrane and controllable illumination enable switching between visual mode and tactile mode, enabling tactile perception without sacrificing vision. We validate MVP-Tac through force calibration in the 0 to 2 N range and demonstrate its potential for tumor palpation via video-based hardness classification on tissue phantoms, achieving 97% accuracy for exposed-tumor classification and 92% accuracy for subdermal-tumor classification. Finally, we conduct a simulated colonoscopy to validate both visual and tactile modalities in a constrained lumen, including vision-guided 3D photomapping of the luminal wall and in situ hardness classification of localized nodules. Overall, MVP-Tac provides a practical path toward restoring clinically useful palpation in RMIS while maintaining essential visual feedback. The design, fabrication, and firmware of MVP-Tac are open-sourced at https://mvp-tac.github.io/

Robotic systems increasingly demand tactile sensing that approaches the adaptability and resolution of human skin to enable dexterous manipulation and safe interaction. OptiTac is a biomimetic tactile sensor that emulates the mechanoreceptor-to-nerve architecture of human touch by pairing each mechanical pin on a soft skin with an optical fiber acting as an artificial nerve. This design demonstrates an architectural principle for routing tactile information away from the sensing surface while preserving high spatial resolution, establishing a practical route toward distributed tactile sensing in future robotic systems. By treating tactile signals as images, simple analytical methods, rather than opaque deep-learning models, are used to infer contact location, size, and shape, providing interpretable and scalable tactile intelligence. This work demonstrates how evolutionary principles from biology can guide the development of artificial nerve systems for robots, offering a pathway toward human-like tactile perception in next-generation robotic platforms. More broadly, OptiTac establishes an artificial nerve-inspired sensing framework for interpretable robotic touch and a scalable route toward future distributed tactile systems.

This paper presents a scalable, open-source visuotactile sensing system for tensegrity robots that enables six-axis wrench estimation and contact detection. The proposed endcap sensor integrates an elastomeric shell, a 3D-printed thermoplastic polyurethane (TPU) interface, and a rigid base housing an embedded camera and LED illumination ring. A novel gyroid-infill bonding technique is introduced to form a durable elastomer-TPU interface without adhesives, yielding a lightweight and modular design compatible with large-scale tensegrity structures. A tactile-to-wrench neural network maps shear vector fields to six-dimensional force and torque measurements. Experimental results demonstrate accurate and stable wrench estimation with a mean squared error (MSE) of 0.1531 on static validation data and out-of-domain generalization under dynamic motion. Furthermore, full-system integration on a 12 kg tensegrity robot confirms the sensor's ability to reliably identify ground contacts. The system substantially improves the practicality of tactile feedback for tensegrity robots, offering a low-cost, reproducible, and physically interpretable pathway toward contact-aware proprioception and state estimation. Open source files are available at \href{https://github.com/Jonathan-Twz/tensegrity-gelfoot}{github.com/Jonathan-Twz/tensegrity-gelfoot}

Tactile sensing is central to how robotic systems interact with the real world, yet current solutions face a tradeoff between sensing area and system complexity. This work investigates metallic ultrasound waveguides as distributed tactile sensors fully interrogated from a single proximal transducer. Using cylindrical indenters, we characterized the acoustic response to single and multi-point contacts with varying forces and contact materials. For single point indentation, the applied force was well captured by a linear relationship with the ratio of the reflection to transmission coefficients (F = a * R/T) across all nine tested materials (R2 >= 0.95). The calibration slope, a, correlated strongly with the material's effective contact modulus (log--log Pearson r=-0.98). The reflected energy partition was found to be a load-independent parameter related to the contacting material's properties, enabling material classification independent of force. For the two-indenter experiment, both contact forces were recovered from the waveguide signal and were in close agreement with reference load cell measurements (contact 1, R2 = 0.97; contact 2, R2=0.95). The approach was extended to two-dimensional metallic sheets, confirming both contact localization and material-dependent effects. Overall, these results validate metallic waveguides as a robust platform for distributed tactile sensing, providing contact localization, force estimation, and material-class discrimination for the contacting body.

Existing texture datasets for tactile sensing primarily consist of sensor readings from a specific sensor interacting with available surfaces/objects rather than describing the textures themselves, limiting fair comparison between tactile sensors and hindering reproducible research. In this work, we introduce a 3D-printable dataset of mathematically defined textures designed to be fabricated reliably across different printers and filament types. The dataset consists of six parametrically generated surface patterns derived from combinations of sine-wave and Fourier-based functions, giving controlled variation in spatial frequency, amplitude, and directional structure. We evaluate the reproducibility of these textures across three popular 3D printers and multiple filament types by measuring variance in images captured using an optical TacTip sensor under controlled contact conditions. Our results show that print quality, particularly peak sharpness and stringing, affects tactile variance, with higher-end printers producing significantly more consistent signatures. Classification experiments using neural networks and PCA-based models further demonstrate that high-quality prints support strong within-printer generalisation, while cross-printer generalisation remains challenging due to geometric inconsistencies. This work establishes the first openly available, physically reproducible 3D-printed texture benchmark, providing a foundation for fair comparison of tactile sensors.

Tactile sensing is essential for humanoid robots to achieve safe physical interaction, dexterous manipulation, and truly human-like responsiveness. However, the design of such systems remains challenging. Conventional approaches often suffer from complex multilayer structures, intricate wiring, high cost, and poor scalability, making it difficult to realize full-body tactile sensing with real-time, low-latency detection while maintaining minimal computational load on the robot's main processor. In this work, we present a simple, scalable and hardware friendly tactile sensing system for a companion humanoid robot based on the self-capacitance principle. The proposed sensor system employs a single conductive fabric layer with a conductive fabric wire architecture and does not require intricate electrode patterning. Scalability was demonstrated by fabricating a 100-point sensor array on a flexible printed circuit (FPC). Evaluation across sampling frequencies showed that 10 Hz is insufficient and misses transient events, whereas 100 Hz and 1000 Hz reliably capture and clearly distinguish all interaction types: gentle touch, slow tapping, fast tapping, and hitting. A decision-tree classifier was implemented directly on the FPGA, offloading real-time inference from the Raspberry Pi 4 with minimal latency and negligible power overhead. This design fully meets the tactile sensing requirements of the HIRO-chan robot and is well-suited for full-body tactile sensing in HIRO-chan and other companion robots.

Tactile sensing is critical for contact-rich dexterous manipulation, yet it remains unclear which tactile abstractions a policy needs and when richer tactile fields justify their hardware cost. This is hard to study empirically: each sensor effectively defines a new robot, and no lab can replicate the same learning experiment across all of them. We present Tactile Genesis, a GPU-parallel tactile sensor simulation platform that exposes binary contact, contact depth, per-taxel kinematic force/torque, elastomer marker displacement, geometry-aware proximity, contact audio, and a voxelized temperature field (the first of its kind in robot learning physics simulation platforms) under a common interface, with configurable placement, resolution, and a realistic noise model (drift, hysteresis, dead taxels, crosstalk). It scales past 20,000 parallel environments and 1,000 taxels on a single GPU, improving throughput by 3 to 20 times over previous tactile simulators. We train teacher-student policies on three dexterous tasks, ablating sensor type, placement, resolution, and noise, and verify transfer to the real XHand1. Proprioception alone is insufficient on every task. Sensor placement dominates sensor type: fingertip-only coverage trails whole-hand coverage by a wide margin, while adding the palm and proximal phalanges closes most of the gap to the privileged teacher. Resolution matters far less than coverage: placing 200 taxels across the whole hand suffices across tasks. We find that force/torque per taxel is consistently the most useful sensor type. These results give concrete guidance for both future tactile hardware design for improving robot hands and policy-side observation choice in dexterous manipulation. https://neuroagents-lab.github.io/tactile-genesis/

Vision-based tactile sensors require high-fidelity simulation for reinforcement learning, yet existing approaches struggle to provide accurate mechanical stress fields within GPU-accelerated robotics platforms. We present TaCauchy, an extensible Finite Element Method (FEM) framework that integrates rigorous physics-based force computation into Isaac Sim. Built on the Unified Incremental Potential Contact (UIPC) solver, TaCauchy directly computes Cauchy stress tensors from hyperelastic constitutive laws and projects them onto contact surfaces to obtain traction forces and pressure distributions, providing mechanical ground truth from first principles rather than empirical estimation. Our framework features automatic mesh generation with geometry-aware adaptive refinement and a modular sensor interface enabling rapid integration of diverse sensors (GelSight Mini, DIGIT, 9DTact) with minimal configuration. Performance benchmarks demonstrate 33.40 FPS for single environments and 555 FPS aggregate throughput across 60 parallel environments, with stress extraction overhead under 1 ms. Physical validation experiments show strong agreement between simulated and real tactile responses across force ranges from 1.2556 N to 4.7332 N, achieving SSIM above 0.93, confirming the framework's capability to provide accurate, physically-grounded force supervision for downstream robotic manipulation tasks.

Artificial dynamic tactile sensing requires sensitivity, robustness, and compliance, yet existing technologies face trade-offs when scaling to large-area arrays, compounded by wiring complexity and cost. Here, we report a passive distributed paradigm using deep sub-wavelength acoustic waveguides that decouples performance from structural flexibility. Elastic-membrane-capped Helmholtz resonators interconnected by spring-reinforced microtubes form an enclosed network with invariant acoustic transmission under macroscopic bending. By sparsely embedding microphones, the system achieves real-time localization (4 mm highest spatial resolution; >99% accuracy in a 4 microphones 64-node sensing array) and waveform reconstruction of low-frequency signals (<100 Hz). Fast Continuous Wavelet Transform and a lightweight neural network enable inference within 5.5 ms. We demonstrate conformable prototypes-fingertip arrays, a tactile glove, and large-area skins-detecting stimuli from single-hair contact to 5-mg particle impacts, arterial pulse waves, feather touches, and finger contact. This establishes a scalable, flexible, low-cost paradigm for next-generation human-machine interfaces.

This paper introduces a novel tactile sensor for in-hand manipulation with slip-aware control that integrates velocity, force/torque, and pressure map sensing into a single device with a deformable contact pad. To the best of our knowledge, this is the first sensor to combine these sensing modalities within a single compliant structure. The sensor features a deformable contact surface and can robustly track both flat and curved surfaces across a wide range of materials. Its performance is evaluated through a comprehensive set of experiments that highlight both its capabilities and limitations. The sensor is designed for rapid and low-cost fabrication using a combination of standard PCB manufacturing and rapid prototyping techniques.

Humans rely on spatially dense, geometry and force-aware tactile feedback at high temporal resolution for dexterous manipulation. While vision-based tactile sensors enable dense force estimation, they are limited by camera frame rates, motion blur, and data bandwidth. Event-based optical tactile sensors offer an attractive alternative with microsecond temporal resolution and low motion blur, but existing methods are restricted to predicting only net forces. We introduce the first framework for dense 3D force field reconstruction using event-based optical tactile sensors. Our approach estimates 3D surface displacements from event data and maps them to forces via the inverse Finite Elements Method (iFEM). Shear displacements are recovered through the proposed event-based marker tracking algorithm, while normal displacements are predicted by a convolutional neural network trained on a collected dataset of synchronized force-displacement-event data. Experiments demonstrate accurate reconstruction of physically grounded forces, achieving a mean absolute error of (0.14 N, 0.10 N, 0.93 N) over force ranges up to (4 N, 4 N, 20 N), while operating at an average of 100 Hz. This work constitutes a first step toward enabling dense force feedback for high-frequency control in robotic grasping and dexterous manipulation.

We address the challenge of engineering distributed haptic displays capable of reproducing multiple localized, independently addressable vibrations -- representing virtual tactile pixels -- at arbitrary locations on a surface. Our technique is based on the focusing of mechanical waves in a flexural plate using a sparse set of actuators. At tactile frequencies, wave diffraction prevents the formation of localized virtual tactile pixels at spatial scales relevant for multi-digit touch interactions. We overcome this limitation by augmenting the plate with a lattice of mechanical resonators, forming a locally resonant metamaterial plate. Coupling between the plate's dynamic modes and those of the resonators alters the dispersion relation governing wave transmission, introducing a slow-wave branch that enables focusing beyond the diffraction limit imposed by the unmodified plate. We use numerical simulations to engineer the dispersion relation of the metamaterial system for high-resolution focusing at tactile frequencies. We then fabricate a metamaterial tactile display and experimentally demonstrate virtual pixels that are far more localized than those generated on an otherwise identical plate without resonators, resulting in a tenfold reduction in virtual-pixel area. In behavioral experiments, we show that this system can deliver perceptually localized single- and multi-point tactile feedback and moving tactile sources while maintaining independent control over temporal waveforms at multiple display locations. The methods reported here can enable high-resolution haptic displays for widespread applications using a small number of actuated degrees of freedom.

We present a hybrid robotic skin that combines electrical impedance tomography (EIT) with pneumatic tactile sensing to improve force reconstruction capability. The developed robotic skin is fabricated entirely by 3D printing and spray coating, making it affordable and easy to build. A Tikhonov-regularized inverse reconstruction, paired with per-pad pneumatic calibration, enables accurate large-area tactile sensing with a simple measurement scheme. For validation, we conducted load-cell indentation experiments; the results showed consistent force reconstruction across locations within a pad. Compared with an EIT-only baseline, sensitivity non-uniformity was also reduced, with the coefficient of variation decreasing from 0.31 to 0.14, indicating that the proposed approach addresses a longstanding limitation of EIT. We further demonstrated chest-mounted integration on a humanoid robot and found that the pneumatic signals remained reliable across diverse contact scenarios, including multiple simultaneous contacts on the same sensing pad. These results indicate a practical path toward accurate, scalable whole-body tactile sensing in real robotic systems.

This paper presents a magnet-based robotic skin that integrates a multilayer soft lattice with distributed Hall-effect sensor arrays and a tactile super-resolution model. External contact forces are converted to magnetic field changes by embedded permanent magnets, and the lattice spreads these changes across the sensing domain. This gives each sensor a large, overlapping receptive field and enables a large sensing area with minimal blind spots. Lattice parameters are tunable, enabling joint adjustment of mechanical compliance and transduction characteristics. An implicit modeling workflow and selective laser sintering (SLS) 3D printing support rapid fabrication of conformal, high-complexity structures. A convolutional neural network trained on experimental measurements estimates contact location and normal force in real time. Experiments validate localization accuracy and indicate scalability to larger surfaces, suggesting applicability to whole-body robotic skin and safe human-robot interaction.

Vision-based learning from demonstrations has achieved remarkable success in enabling robots to perform manipulation tasks and high-level semantic reasoning, yet it remains insufficient for complex, contact-rich manipulation. While there is broad agreement that tactile sensing improves manipulation, there is no empirical guidance on which tactile sensors are best suited for which manipulation tasks. In this paper, we provide a systematic, task-driven evaluation of tactile sensors for robot manipulation and propose a framework for selecting and evaluating sensors based on manipulation policy performance. Separate manipulation policies are trained for tactile sensors of four distinct modalities: visual, acoustic, magnetic, and resistive, across three tasks: pick-and-place with unknown mass, object reorientation, and plug insertion. For each task, an analysis of how sensor properties such as spatial resolution, shear sensing, and tactile representation, and the inherent material friction affect task performances is done. Rather than tactile sensing being universally beneficial in the same way, our results show that the usefulness of tactile information depends strongly on sensor modality, material properties, and the specific manipulation tasks. All of the tactile sensors, code, data, and hardware setup will be publicly available on the project website.

Assistive robotic grasping plays an important role in enabling safe and adaptive manipulation of diverse objects. However, existing systems often rely on electronic sensing and multi-stage processing pipelines, increasing system complexity and reducing accessibility. To address these limitations, we present TouchDrive, a cost-effective, electronics-free tactile sensing interface for assistive grasping. TouchDrive directly converts contact forces into pneumatic feedback through valve-mediated switching, integrating sensing, signal generation, and feedback within a single passive mechanical loop. The system can be employed using a pneumatic normally closed valve, a compressed air tank, sensing element, and haptic feedback actuator without electronics. By delivering tactile cues, TouchDrive empowers users to modulate grasp forces, enabling precise and robust delicate manipulation of compliant and fragile objects. The interface has been validated across diverse robotic platforms, consistently demonstrating reliable performance and practical applicability in assistive grasping tasks, such as handling fruits and everyday items (up to 20 objects).

Dexterous robotic hands require high-speed multimodal sensing across many degrees of freedom, yet existing readout architectures often impose trade-offs between sensor count, wiring complexity, and sampling bandwidth. This paper presents a scalable analog sensor readout architecture based on a serial-in parallel-out (SIPO) shift-register principle. The proposed architecture supports versatile integration of heterogeneous analog-output sensors, scalable expansion using only three signal lines between sensor modules, and fast, configurable sampling. We validate the approach on a tendon-driven robotic hand integrating 16 joint sensor modules and one four-channel tactile sensor module, enabling acquisition of 20 sensor channels at a full-scan rate of 1 kHz, with stable operation up to 1.5 kHz. Joint sensor characterization showed a maximum slope absolute percentage error (APE) of 0.446% and sub-degree estimation error, indicating that the proposed readout system does not significantly degrade sensing performance. For tactile sensing, LSTM-based models achieved an RMSE of 0.125 N for force estimation and 93.4% accuracy for five-class contact-location classification, and were deployed for real-time inference at 1 kHz. System-level experiments showed that the joint sensors provide more accurate feedback than motor-based estimation during interaction, while the tactile sensor enables responsive force estimation in contact. The proposed architecture offers a practical path toward fully sensorized robotic hands for dexterous manipulation.

We present FlexiTac, a low-cost, open-source, and scalable piezoresistive tactile sensing solution designed for robotic end-effectors. FlexiTac is a practical "plug-in" module consisting of (i) thin, flexible tactile sensor pads that provide dense tactile signals and (ii) a compact multi-channel readout board that streams synchronized measurements for real-time control and large-scale data collection. FlexiTac pads adopt a sealed three-layer laminate stack (FPC-Velostat-FPC) with electrode patterns directly integrated into flexible printed circuits, substantially improving fabrication throughput and repeatability while maintaining mechanical compliance for deployment on both rigid and soft grippers. The readout electronics use widely available, low-cost components and stream tactile signals to a host computer at 100 Hz via serial communication. Across multiple configurations, including fingertip pads and larger tactile mats, FlexiTac can be mounted on diverse platforms without major mechanical redesign. We further show that FlexiTac supports modern tactile learning pipelines, including 3D visuo-tactile fusion for contact-aware decision making, cross-embodiment skill transfer, and real-to-sim-to-real fine-tuning with GPU-parallel tactile simulation. Our project page is available at https://flexitac.github.io/.

Simulating optical tactile sensors presents significant challenges due to their high deformability and intricate optical properties. To address these issues and enable a physically accurate simulation, we propose DOT-Sim: Differentiable Optical Tactile Simulation. Unlike prior simulators that rely on simplified models of deformable sensors, DOT-Sim accurately captures the physical behavior of soft sensors by modeling them as elastic materials using the Material Point Method (MPM). DOT-Sim enables rapid calibration of optical tactile sensor simulation using a small number of demonstrations within minutes, which is substantially faster than existing methods. Compared to current baselines, our approach supports much larger and non-linear deformations. To handle the optical aspect, we propose a novel approach to simulating optical responses by learning a residual image relative to the real-world idle state. We validate the physical and visual realism of our method through a series of zero-shot sim-to-real tasks. Our experiments show that DOT-Sim (1) accurately replicates the physical dynamics of a DenseTact optical tactile sensor in reality, (2) generates realistic optical outputs in contact-rich scenarios, (3) enables direct deployment of simulation-trained classifiers in the real world, achieving 85% classification accuracy on challenging objects and 90% accuracy in embedded tumor-type detection, and (4) allows precise trajectory following with a policy trained from demonstrations in simulation, with an average error of less than 0.9 mm.

3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage, but prior implementations have been limited to unimodal sensing and rigid materials. To improve the practical usability of 3D-printed artificial skins, we present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration, soft compliant coverings for impact absorption and pressure sensing, and a streamlined electrical interface between printed conductive traces and external electronics. We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering by deploying six artificial skin units with 40 sensing elements over an FR3 robot arm.

Training machine learning models for robotic tactile sensing requires vast amounts of data, yet obtaining realistic interaction data remains a challenge due to physical complexity and variability. Simulating tactile sensors is thus a crucial step in accelerating progress. This paper presents SPLIT, a novel method for simulating image-based tactile sensors, with a primary focus on the DIGIT sensor. Central to our approach is a latent space arithmetic strategy that explicitly disentangles contact geometry from sensor-specific optical properties. Unlike methods that require recalibration for every new unit, this disentanglement allows SPLIT to adapt to diverse DIGIT backgrounds and even transfer data to distinct sensors like the GelSight R1.5 without full model retraining. Beyond this adaptability, our approach achieves faster inference speeds than existing alternatives. Furthermore, we provide a calibrated finite element method (FEM) soft-body mesh simulation with variable resolution, offering a tunable trade-off between speed and fidelity. Additionally, our algorithm supports bidirectional simulation, allowing for both the generation of realistic images from deformation meshes and the reconstruction of meshes from tactile images. This versatility makes SPLIT a valuable tool for accelerating progress in robotic tactile sensing research.

Tactile sensing plays a key role in enabling dexterous and reliable robotic manipulation, but realizing this capability requires substantial calibration to convert raw sensor readings into physically meaningful quantities. Despite its near-universal necessity, the calibration process remains ad hoc and labor-intensive. Here, we introduce 3D Cal, an open-source library that transforms a low-cost 3D printer into an automated probing device capable of generating large volumes of labeled training data for calibrating vision-based tactile sensors. 3D Cal also provides an end-to-end, user-friendly pipeline for training custom convolutional networks to produce high-quality depth reconstructions. Using 3D Cal, we systematically explore the relationship between training data volume and spatial reconstruction performance on two commercially available sensors, DIGIT and GelSight Mini, and derive practical, empirically-grounded guidelines for calibrating these sensors. Finally, we demonstrate depth reconstruction performance on the DIGIT and GelSight Mini comparable to state-of-the-art methods, achieving average reconstruction errors of 156 $\mathrm{μm}$ and 205 $\mathrm{μm}$ on unseen objects, respectively. By automating tactile sensor calibration, 3D Cal can accelerate tactile sensing research, simplify sensor deployment, and facilitate the integration of tactile sensing in robotic platforms.

Object compliance perception enables the identification of soft materials, supporting tasks such as fruit detection and assisted medical palpation. Compliance perception requires sensing an object's deformation and contact forces. Existing vision-based tactile sensing for compliance perception usually depends only on force or deformation. However, deformation-based approaches cannot reliably quantify object compliance, while force-based methods are overly sensitive to geometric variations. To address these limitations, this paper presents a framework that fuses temporal force sequences and deformation field information. Specifically, time-varying contact forces are inferred from tactile image sequences via a neural network, while deformation characteristics are encoded using depth maps. Crucially, the temporal force sequence is used as a dynamic force-response feature for compliance recognition. In standard experiments, the force prediction error reaches 0.06 N within a measurement range of 12 N. The proposed method achieves a 98.0% Shore-hardness classification accuracy for samples ranging from 10 HA to 80 HA. In practical scenarios, including abnormal fruit detection and soft matter, the overall accuracy exceeds 98.5%. This method improves the compliance perception ability of artificial tactile systems and facilitates their deployment in embodied perception applications.