Wireless Networks

Low-altitude wireless networks (LAWNs) are emerging as a key infrastructure for heterogeneous unmanned aerial systems that support concurrent services within a shared three-dimensional airspace. Their coexistence creates strong coupling among mobility, connectivity, and shared network resources, while heterogeneous services impose distinct and time-varying requirements. These interactions naturally form a dynamic non-cooperative game in which both operating conditions and coordination objectives evolve over time. Conventional optimization and learning-based controllers typically rely on predefined objectives, limiting their ability to adapt autonomously to changing service requirements and resource priorities. To address this challenge, we propose a hierarchical hybrid large language model (LLM)- multi-agent reinforcement learning (MARL) architecture organized as a dual-loop structure. Specifically, an outer adaptation loop employs LLM-assisted game orchestration to interpret service requirements and operator intent, and reconfigure objectives and resource priorities, while an inner loop executes decentralized, parameter-conditioned MARL policies under the configured game. A logistics-monitoring case study illustrates how the proposed framework facilitates coordinated coexistence among heterogeneous services, adapting to evolving operating conditions without retraining the underlying MARL policies. Finally, we discuss key challenges and research directions toward scalable, trustworthy, and adaptive agentic LAWNs.

Video token communication represents video content as discrete tokens that differ in their importance to reconstruction and exhibit temporal dependencies. When these tokens are packetized for wireless transmission, block fading can cause multiple important or correlated tokens to be lost together, severely degrading video reconstruction. To address this issue, we propose a loss-resilient wireless video token communication (WVTC) framework. WVTC evaluates token importance from the intrinsic predictive structure of video tokens, assigning high priority to structural I-tokens and measuring P-token importance by temporal neighborhood novelty. A shuffled mixed I/P-token packetization scheme disperses structural anchors and correlated temporal regions across packets. Using only current block channel state information, an online scheduler jointly considers packet importance density, MCS-dependent decoding reliability, block capacity, and importance concentration when allocating packets to fading blocks. At the receiver, a fine-tuned detokenizer reconstructs missing content from surviving tokens without retransmission. Numerical results demonstrate improved perceptual quality and more graceful degradation under increasing packet error rates.

Federated Learning (FL) enables collaborative machine learning (ML) across distributed clients while preserving privacy. However, efficient model convergence in FL remains challenging, especially in wireless networks where non-independent and identically distributed (non-IID) data and frequent client dropouts are common. Traditional FL algorithms, such as FedAvg, rely solely on dataset size to weight client updates. This introduces biases towards clients with larger datasets and makes the process sensitive to non-IID data, outliers, and client dropouts. To address these challenges, we propose Federated Learning with Loss-Based Weighting (FedLBW), a novel aggregation method that assigns each client's update a weight proportional to the inverse of its validation loss, computed using a small proxy dataset on the server, rather than its dataset size. This ensures that lower-loss models exert greater influence during aggregation, prioritizing the most reliable updates and boosting overall performance. Through extensive experiments across multiple datasets, including FashionMNIST (CNN), CIFAR-10 (ResNet-18), and CIFAR-100 (ResNet-34), we demonstrate that FedLBW achieves higher accuracy and faster convergence compared to baseline algorithms such as FedAvg, FedAvgM, FedProx, FedNova, FedLAW and FedDkw, with notable improvements of up to 7.6 % higher accuracy on CIFAR-10 in extreme non-IID cases. Moreover, FedLBW showcases exceptional resilience to increasing dropout probabilities, consistently maintaining significantly higher accuracy even in challenging conditions. These results establish FedLBW as an effective and resilient solution for FL in wireless network environments, offering marked improvements in model accuracy, convergence speed, and robustness to non-IID data and client dropouts.

Maximizing throughput under proportional fairness in dense wireless networks requires jointly managing user association, scheduling, base station (BS) activation, and handover control under hard finite-horizon energy and handover budgets, which induces a fundamental tension between BS-side energy management and user-side handover regulation. While multi-agent reinforcement learning (MARL) is a natural framework for such distributed sequential control, its application here faces two difficulties: finite-horizon budget constraints cannot be evaluated at each time slot, and the nonlinear proportional fairness utility admits no principled per-slot decomposition. We propose HeLyMARL, a Lyapunov-embedded heterogeneous MARL framework that resolves both via drift-plus-penalty decomposition with virtual queues. The energy and handover constraint pressures are internalized directly into a unified per-slot reward, converting the constrained finite-horizon problem into an unconstrained MARL problem. Comparison against two Lagrangian-based alternatives reveals a timescale separation: Lagrangian relaxation regulates constraints only across training episodes, whereas the virtual queues of HeLyMARL bound cumulative budget consumption at every partial horizon within an episode, a pacing guarantee beyond the reach of greedy Lyapunov-based control. Simulations show that HeLyMARL is the only method that sustains the throughput-fairness balance together with uninterrupted service throughout the horizon, outperforming conventional MARL, Lyapunov-based, and constrained MARL benchmarks without premature budget exhaustion.

In this paper, we study an unmanned aerial vehicle (UAV)-assisted integrated sensing and communication (ISAC) system, where a UAV enhances the sensing capability of a base station (BS) towards a target while ensuring reliable communication towards a downlink user. This architecture is practically attractive for future wireless networks due to the UAV's controllable mobility and adaptive sensing coverage in wireless environments. The sensing performance is characterized by the average Cramér-Rao bound (CRB), which quantifies the minimum variance of the unbiased angle-of-arrival estimation. To enhance the sensing performance, the UAV trajectory and beamforming parameters are jointly optimized under power and mobility constraints, while satisfying communication requirements to the downlink user. To address the resulting non-convex problem, we employ null-space projection for beamforming design and adopt deep reinforcement learning for the trajectory optimization over a discrete-time scale. In each time slot, beamforming is optimized based on the channel state information to improve CRB performance while mitigating interference between the BS and the communication user. Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.

Large language model (LLM)-driven evolutionary search is an emerging algorithm-discovery paradigm that has already produced novel results in several scientific fields. Yet its application to wireless communications remains largely unexplored. To bridge this gap, we introduce The AI Telco Engineer (AITE), a framework to autonomously design algorithms for complex communication problems, while navigating performance-complexity tradeoffs. We showcase AITE on two challenging physical-layer problems: designing an equalizer for an orthogonal time-frequency space (OTFS) system, and constructing a receiver algorithm for an orthogonal frequency-division multiplexing (OFDM) system using a custom constellation and operating without pilots. For the first task, AITE develops algorithms that outperform the best-known solutions while reducing computational latency by a factor of 3.6 compared to the strongest baseline. For the second task, it discovers the first explicit, explainable algorithms that achieve performance parity with state-of-the-art neural receivers. These results demonstrate the strong potential of LLM-driven evolutionary search for the autonomous discovery of next-generation wireless communications algorithms.

The increasing complexity of next-generation wireless networks has driven the integration of artificial intelligence (AI) into wireless communications. However, most existing studies focus on developing task-specific deep learning techniques for single scenarios, which limits their ability to generalize across diverse tasks, channel conditions, and system configurations. To address this generalization bottleneck, we propose a hierarchical wireless foundation model (WFM) for multi-task optimization. The proposed WFM couples an upstream foundation channel encoder (FCE) with a downstream foundation optimization decoder (FOD) via geometry-aware cross-attention. Specifically, the FCE extracts task-agnostic channel representations via self-supervised masked reconstruction while the FOD generates multi-task optimization decisions through differentiable output heads. Moreover, a hybrid supervised-to-unsupervised training strategy is employed to overcome the performance ceiling of purely supervised learning, and the modular architecture of the WFM enables efficient adaptation to unseen communication tasks with minimal parameter overhead. Simulation results show that the proposed WFM learns high-fidelity channel representations and achieves competitive multi-task optimization performance while substantially reducing optimization inference latency relative to numerical baselines. Furthermore, it exhibits robust generalization to unseen propagation environments, varying constraint parameters, and heterogeneous system configurations.

Accurate and robust wireless localization is a critical enabler for emerging 5G/6G applications, including autonomous driving, extended reality, and smart manufacturing. Despite its importance, achieving precise localization across diverse environments remains challenging due to the complex nature of wireless signals and their sensitivity to environmental changes. Existing data-driven approaches often suffer from limited generalization capability, requiring extensive labeled data and struggling to adapt to new scenarios. To address these limitations, we propose SigMap, a multimodal foundation model that introduces two key innovations: (1) A cycle-adaptive masking strategy that dynamically adjusts masking patterns based on channel periodicity characteristics to learn robust wireless representations; (2) A novel "map-as-prompt" framework that integrates 3D geographic information through lightweight soft prompts for effective cross-scenario adaptation. Extensive experiments demonstrate that our model achieves state-of-the-art performance across multiple localization tasks while exhibiting strong zero-shot generalization in unseen environments, significantly outperforming both supervised and self-supervised baselines by considerable margins.

Millimeter-wave (mmWave) beam alignment plays a critical role in next-generation wireless systems, yet its efficient implementation remains challenging. Meta-learning and transfer learning have been explored to enable deep learning-based beam prediction models to rapidly adapt to unseen environments; however, existing meta-learning approaches adapt the entire network and are trained from random initialization, leading to a large number of updated parameters and a high meta-training cost, while transfer learning approaches restrict adaptation to part of the network but do not exploit episodic meta-learning, which explicitly trains the model over multiple tasks, to optimize the adaptation process itself. To overcome these limitations, we propose MTL-BA, a meta-transfer learning framework for beam alignment in millimeter-wave multiple-input single-output (MISO) systems that freezes a pre-trained convolutional backbone and meta-learns only lightweight Scale-and-Shift (SS) adapters together with a classifier head. Warm-starting from the pre-trained model and restricting adaptation to the SS adapters and classifier head reduce both the adaptation cost and the meta-training budget without sacrificing prediction performance. Simulation results on the DeepMIMO ray-tracing dataset show that MTL-BA matches the accuracy and spectral efficiency of full fine-tuning across various SNR levels despite updating approximately $17\times$ fewer parameters than both full fine-tuning and Model-Agnostic Meta-Learning (MAML), outperforms last-layer fine-tuning while updating a comparable number of parameters, and approaches MAML's performance while requiring $60\%$ fewer meta-training epochs.

WiFi sensing based on Channel State Information (CSI) promises ubiquitous, device-free perception, yet current research remains trapped in a Tower of Babel - fragmented into isolated silos where models are tailored to specific hardware dialects, fixed environments, and narrow tasks. The primary bottleneck is the Heterogeneity Gap: the disparity in signal dimensions, sampling rates, and semantic labels that prevents cross-system understanding. To bridge this gap, we propose a foundation-model framework that treats CSI not merely as raw signals but as a structured language with a learnable universal grammar. We first curate and standardize a large collection of heterogeneous real-world CSI datasets, establishing a unified infrastructure that allows incompatible signal formats to be treated as a single corpus. Second, we introduce a modular architecture that acts as a universal translator where lightweight dataset-specific adapters tokenize diverse signal inputs into a shared latent vocabulary, while a shared self-supervised Transformer backbone learns the temporal syntax of human motion and environmental dynamics. This design decouples sensing semantics from hardware syntax. Extensive evaluations show that by mastering this universal language, our approach consistently outperforms task-specific baselines and exhibits strong generalization capability in new environments, achieving superior efficiency in few-shot scenarios. By effectively absorbing heterogeneity, the framework offers a path toward robust, general-purpose wireless sensing, mirroring the linguistic generalization observed in Large Language Models. The code implementation is available at: https://github.com/cjychenjiayi/WiLLM.

Semantic communication (SemCom) aims to preserve semantic meaning and task-oriented information beyond conventional message recovery over wireless channels. The adoption of SemCom in shared-access wireless networks introduces new vulnerabilities for multi-user semantic inference. This paper considers a SemCom system for two transmitters communicating with a common receiver over a multiple access channel. Each transmitter maps source information into latent semantic representations, while the receiver jointly reconstructs and classifies the semantic information for both transmitters. A selective over-the-air backdoor (Trojan) attack is presented in which an adversary transmits a low-power trigger waveform over the air and injects it into the shared received signal during training. By transmitting the trigger again during testing, this stealthy, low-power attack selectively manipulates the semantic inference for one transmitter while minimally affecting the inference of the other transmitter. To mitigate this vulnerability, a trigger-aware defense mechanism is developed to preserve correct semantic labels under trigger-contaminated wireless observations. The results demonstrate both the vulnerability of shared-access SemCom systems to selective over-the-air backdoor attacks and the effectiveness of trigger-aware robust training for semantic protection.

While wireless foundation models (FMs) are demonstrating strong potential to enable AI-Native 6G networks, their high computational cost remains a critical barrier to deployment. The large computational cost stems from the rigid, full-depth execution of the FM backbone for every task, a process we show is not only inefficient but can also degrade performance on unseen out-of-distribution (OOD) tasks. In this paper, we propose a novel early-exit FM framework that attaches lightweight, per-task heads, at the most appropriate exit-stage of a frozen wireless FM encoder, enabling variable-depth inference tailored to each task's preferred representation depth. Our results demonstrate that these intermediate-layer features not only speed-up inference significantly (up to 93% fewer FLOPs), but also provide more transferable representations that exceed the full encoder accuracy on unseen tasks. We further demonstrate that a simple fixed-exit strategy per task is more effective than traditional early-exiting policies that route different samples to different exits based on their perceived difficulty levels.

In next-generation wireless networks, the growing density of devices and limited spectrum resources pose severe jamming challenges to fragile legitimate communication links in the wireless electromagnetic environment. Crucially, when jamming overlaps with pilot and data symbols in both time and frequency domains, it inflicts a severe bottleneck on receiver-side joint estimation and detection. Existing schemes often lack an effective framework to combat such jamming contamination, thereby failing to guarantee reliable transmission. To address this issue, we propose a Brownian bridge diffusion-based joint channel estimation and data detection framework (BBD-JCED) for jamming-resilient receivers. Specifically, the proposed framework comprises two core modules: the first extracts jamming features in the short-time Fourier transform (STFT) domain and suppresses jamming samples, thereby improving the signal-to-jamming-plus-noise ratio (SJNR) of the received signal; the second introduces a Brownian bridge diffusion (BBD) process to model the evolution of the suppressed signal and the encoded bits in the presence of channel estimation errors, thereby enabling enhanced joint channel estimation and data detection. To alleviate the computational burden of the BBD process in the second module, we further derive a fast ordinary differential equation (ODE) solver that enables its low-complexity iterative evolution. Finally, we design a multi-module training algorithm to improve the data recovery capability of the proposed framework. Simulation results demonstrate that the proposed framework achieves superior bit recovery performance compared with baseline schemes while maintaining a lower number of model parameters and competitive computational complexity.

Accurate and timely channel state information (CSI) is essential for next-generation wireless systems, yet existing works treat CSI compression and CSI prediction as separate problems, both in academia and in current 3GPP studies. Consequently, channel aging remains insufficiently addressed within standardized CSI feedback pipelines. In this article, we propose a unified compression-prediction framework that integrates Contrastive Predictive Coding (CPC) directly into the 3GPP-compliant CSI compression architecture. Instead of predicting high-dimensional CSI matrices, our approach forecasts future latent representations and jointly optimizes reconstruction fidelity and temporal predictive coherence via a combined 1-SGCS and InfoNCE objective. This design enables temporal representation learning without increasing feedback overhead. We present two variants: CPC-before-Compression, which performs autoregressive modeling on encoded features prior to quantization, and CPC-after-Compression, which shifts temporal modeling to the base-station to reduce the complexity of users' devices. Evaluations on 3GPP-compliant datasets from Nokia, Oppo, and CATT show that CPC-before-Compression achieves over 90% reconstruction accuracy with 32x lower decoder GFLOPs than the 3GPP baseline, while CPC-after-Compression preserves an identical encoder footprint and the same 64-bit feedback overhead. By unifying compression and prediction within a standardized pipeline, the proposed framework provides an age-aware, computationally efficient CSI feedback solution. The source code is publicly available at: https://github.com/AhmedRadwan02/cpc-3gpp

Millimeter-wave (mmWave) networks are highly susceptible to line-of-sight (LoS) blockages. Vision-aided wireless communications (VAWC) enable proactive handovers (PHO) to mitigate such blockages; however, PHO becomes challenging when no nearby base station (BS) is available. In such cases, reconfigurable intelligent surfaces (RIS) can be used to restore connectivity. To ensure timely PHO, the RIS configuration time must be taken into account, as the large number of RIS elements can limit responsiveness in time-sensitive scenarios. This work proposes a novel RIS-assisted PHO approach that optimizes the number of allocated RIS elements to balance signal processing complexity and link quality under handover timing constraints, making the RIS-assisted link more energy-efficient. An optimization problem based on particle swarm optimization (PSO) is formulated to determine the optimal end-to-end RIS link setup that runs offline to bypass latency constraints. Results show that reducing the number of RIS elements by 12% leads to a 10% decrease in dissipated energy without compromising the signal-to-noise ratio (SNR). Moreover, the RIS-assisted link achieves a 15--30 dB improvement in blocked regions while maintaining accurate PHO timing.

The exponential increase in scientific publications has driven the emergence of new trends. Accurate forecasting of these developments is essential for researchers and professionals to stay updated with advancements in the field. This study presents an automated pipeline for trend prediction in the wireless networks and mobile computing domain by integrating clustering, topic modeling, and time series analysis. The process begins with the collection of 127,820 abstracts from high-impact journals and conferences, followed by extensive preprocessing and semantic embedding using the SPECTER model. AutoCluster applies meta-learning to select the most suitable clustering algorithm based on the dataset meta-features, ensuring semantically coherent groupings. AutoTopicModeling then employs a successive halving strategy to identify the best-performing topic model per cluster, followed by LLM-assisted topic labeling and optional label generalization. Finally, AutoTrendAnalysis transforms topic-labeled data into time series and applies forecasting models -ARIMA, STL, Prophet, or LSTM - to predict future topic popularity. Topics are classified as strong, weak, or noise signals based on forecast trajectories, offering interpretable insights into emerging and declining research themes. The framework is scalable, adaptive, and designed for robust trend analysis across scientific domains. Experimental results demonstrated high predictive accuracy, achieving a Root Mean Square Error (RMSE) of 36.76.

The deployment of data-driven models in 6G wireless networks is increasingly challenged by frequent distribution shifts that degrade performance over time. Unsupervised Domain Adaptation (UDA) offers an alternative approach by adapting the trained model to a shifted domain without requiring labels. However, UDA pipelines are often more complex than single-task training due to additional modules and optimization procedures, raising a practical question: do the benefits of adaptation come at a higher energy cost, and how does this trade-off compare to retraining when labeling effort is also considered? In this work, we investigate the energy consumption of UDA and compare it to single task. We further propose a way to determine the minimum number of target domains for which UDA becomes more energy-efficient than retraining, taking into account the labeling cost. Our results aim to clarify when UDA should be preferred over classical train-from-scratch approaches from an energy and labeling-aware perspective.

Driven by their remarkable success in computer vision and inverse problem solving, score-based models are increasingly applied to wireless communications, where they show promise across a range of physical-layer tasks. However, despite this growing interest, the current literature often lacks a rigorous analysis of when score-matching offers a tangible advantage over traditional discriminative learning. This paper aims to address this gap through the use-case of channel estimation, a fundamental inverse problem in wireless systems. We present a theoretically grounded interpretation of score-based channel estimation through the lens of the perception-distortion tradeoff, identifying the conditions where score matching excels as well as its key limitations. In particular, by modeling downstream wireless tasks (e.g., capacity maximization) as functionals of the channel estimation process, we quantify the excess risk incurred by standard distortion-minimization approaches. Extensive numerical results show that under high predictive uncertainty, the large excess risk gap can be offset by score-based estimation, enabling near Bayesian-optimal precoding via the learned posterior, whereas in the low predictive uncertainty regime, discriminative distortion-minimization approaches are preferable due to lower complexity and more efficient use of model capacity.

This paper considers neural channel state information (CSI) compression for time-varying massive multiple-input multiple-output (MIMO) channels in frequency division duplex (FDD) systems with limited feedback resources. The main challenge lies in obtaining a compact and efficient representation of the CSI given that it exhibits strong temporal correlation across successive snapshots. Existing memoryless compression models do not exploit this property, while simple temporal extensions often incorporate multiple observations without explicitly modeling the latent dynamics. We propose a context-aware compression framework based on a k-memory Markov variational autoencoder (k-MMVAE), which uses a finite temporal window to capture the evolution of CSI in the latent space. The model introduces Markov-structured latent dynamics with finite memory, enabling efficient use of temporal dependencies for compression. Simulation results show that the proposed approach improves target CSI reconstruction performance compared to memoryless and weakly sequential baselines, particularly at low and moderate compression rates. These results suggest that explicit latent temporal modeling can provide an effective mechanism for CSI compression under limited feedback constraints.

The integration of generative artificial intelligence with wireless communication and signal processing systems has opened new avenues for intelligent, data-driven decision-making in future 6G networks. This work proposes a diffusion soft actor-critic (Diffusion-SAC) approach that leverages offline reinforcement learning (RL) enhanced by denoising diffusion probabilistic models (DDPMs) to optimize trajectory and scheduling control in unmanned aerial vehicle (UAV) networks. While offline RL methods, such as conservative Q-learning (CQL), can learn from static datasets, they often struggle to generalize in low-data or dynamic conditions. To address this, we combine the robustness of CQL with the generative power of diffusion models, enabling expressive and signal-aware policy learning that generalizes beyond behavior policies. Applied to a UAV-assisted wireless network, the proposed framework minimizes transmission energy and improves fairness among devices. Simulations show that Diffusion-SAC outperforms standard offline RL baselines, achieving more stable convergence and higher rewards even with limited datasets. The method enhances data efficiency, reduces energy consumption, and increases throughput by more than 35 % compared to existing algorithms, demonstrating its potential for robust policy learning in next-generation wireless control systems.

Conventional communication systems, including both separation-based coding and learning-based joint source-channel coding (JSCC), are typically designed under Shannon's rate-distortion theory. However, relying on generic distortion metrics fails to capture complex human visual perception, often resulting in blurred or unrealistic reconstructions. In this paper, we propose Joint Source-Channel-Generation Coding (JSCGC), a generative communication paradigm that replaces the conventional decoder with a generative model at the receiver. The received signal is treated as a condition that controls the sampling process into the learned conditional distribution, reformulating communication from deterministic reconstruction for distortion minimization to controlled generation for mutual information maximization under perceptual constraints. Based on this formulation, we develop a unified joint training and efficient stochastic sampling framework, and provide theoretical analysis of its effectiveness in both learning and inference stages. Extensive experiments on latent-space image transmission demonstrate that the JSCGC consistently improves feature-based, semantic-level, and distributional quality across diverse channel conditions, while exhibiting a distinct error behavior characterized by semantic inconsistency rather than distortion.

Radio frequency wireless power transfer (RF-WPT) is an enabling technology for supporting uninterrupted communications in future Internet of Things systems by reducing the need for battery replacement and mitigating battery-waste-related issues. For large-scale RF-WPT deployment, one of the main challenges is the scheduler-level resource allocation. Specifically, the transmitter must decide how much energy to deliver, when, and to whom, under limited charging resources, incomplete receiver-side information, and uncertain near-future charging conditions. This article positions generative artificial intelligence (GenAI) as a promising tool for this setting because it can foresee multiple plausible charging scenarios conditioned on coarse operational context and receiver-side information. We propose GenAI to act as an uncertainty-aware support layer for the RF-WPT scheduler rather than as a standalone forecasting or decision-making tool. To this end, we first revisit the main challenges of RF-WPT scheduling, and discuss how major GenAI families can support uncertainty-aware charging decisions by generating scenario-based inputs for downstream tasks. We then present a warehouse-style case study showing that preserving uncertainty through the sampling capability of generative models can improve robust charging decisions compared with deterministic prediction and simple non-learning baselines, especially under risk-sensitive objectives. Finally, we identify key open challenges and present some directions for future research.

Next-generation wireless networks, including satellite-to-Open RAN systems, demand agile and intelligent resource management capable of handling dynamic multi-user interference under stochastic quality of service constraints. This paper introduces DIFFRACT, a neuralized utility maximization framework that leverages differentiable programming to integrate deep learning with optimization in wireless networks. Central to our approach is the exploitation of the mathematical structure of standard interference functions, which are foundational in wireless power control. By developing a duality theory for these functions, we map iterative interference management algorithms into differentiable neural network architectures via algorithm unrolling. This enables distributed, end-to-end gradient-based learning at the network edge, supporting real-time adaptation to interference in both terrestrial and non-terrestrial environments. DIFFRACT allows for scalable and robust utility maximization by modeling complex channel dynamics and leveraging the expressiveness of differentiable models. Experimental results confirm the framework's theoretical soundness and practical effectiveness for next-generation wireless systems.

Age of Information (AoI) has become a central metric for the design of wireless update systems, especially in applications where fresh measurements support tracking, estimation, and control. Despite its popularity, the use of mean AoI or peak AoI as a surrogate for closed-loop performance is often motivated by intuition rather than by a control-theoretic derivation. This paper examines whether minimizing the mean AoI is in fact optimal for networked control systems. For scalar linear time-invariant systems with delayed intermittent updates, we show that, under state-independent scheduling policies, the infinite-horizon LQR tracking problem reduces to an optimization over the distribution of inter-scheduling intervals. The resulting objective depends on higher-order statistical moments, and in unstable or correlated regimes on exponential moments, of the inter-scheduling process rather than only on its mean. Consequently, policies with identical mean AoI can induce substantially different tracking costs. We further extend the analysis to disturbances with exponentially decaying autocorrelation and derive equivalent cost formulations that expose the role of the full interval distribution. Finally, we evaluate the theory using real vehicle trajectories from the NGSIM US-101 dataset. The empirical results match the predicted performance trends, demonstrating that mean AoI alone is insufficient for control-oriented network design.

Future wireless networks demand rapid adaptation to highly heterogeneous environments and dynamic task configurations, necessitating a shift from conventional rule-based and optimization-driven radio resource management (RRM) toward artificial intelligence (AI)-driven RRM. AI-driven approaches can learn complex nonlinear relationships, generalize across diverse network conditions and enable real-time, scalable and autonomous decision-making. Among RRM techniques, coordinated multipoint (CoMP) transmission is pivotal for mitigating inter-cell interference and enhancing cell-edge performance, thereby improving quality of experience (QoE) in dense deployments. However, optimal multi-cell selection remains a complex combinatorial challenge as it requires jointly optimizing over many possible serving-cell combinations under dynamic traffic and channel conditions. Despite their success, conventional deep reinforcement learning (DRL) methods such as proximal policy optimization (PPO) suffer from poor sample efficiency, limited generalization, and costly retraining when state and action spaces change. To address these bottlenecks, we propose a Prompt Decision Transformer (PromptDT) based multi-task learning framework capable of learning across diverse network configurations and reformulating multi-cell selection as a sequence modeling problem. By leveraging offline trajectories and task-specific prompts, PromptDT enables scalable learning across diverse network configurations, including varying base stations and user equipment counts, and scheduler policies. Experimental results demonstrate that PromptDT improves QoE by up to 49% in multi-task settings compared to baselines, with performance scaling positively alongside model capacity. Moreover, PromptDT generalizes effectively to unseen tasks, achieving robust few-shot adaptation to new network configurations without retraining or fine-tuning.

Decentralized learning is a promising paradigm for collaborative training in mobile and pervasive systems, as it avoids a central coordinator and does not require sharing raw data. Yet, most analyses rely on idealized communication assumptions that break down in wireless settings, where connectivity is intermittent, topology changes due to mobility, and bandwidth is limited. We study decentralized averaging under client asynchrony, time-varying contact graphs, and technology-dependent throughput constraints. We implement a fully decentralized protocol that overlaps synchronization with local training and supports partial tensor-level transfers when contacts end early. Using Random Waypoint mobility and multiple wireless technologies (Bluetooth LE, LTE, and Wi-Fi), we quantify how network dynamics and link capacity impact convergence. We identify three operating regimes: (i) inter-contact time largely dictates convergence via mixing, (ii) partial updates are often well tolerated when contacts are frequent, and (iii) very dense contact patterns can trigger contention, reducing effective throughput. These findings provide a practical lens to reason about decentralized learning deployments over realistic wireless systems, highlighting when improving connectivity, increasing bandwidth, or mitigating contention is most impactful.

Wireless localization is a fundamental capability of sixth-generation (6G) networks. Conventional model-based methods require accurate modeling of the propagation environment and degrade in complex multipath and non-line-of-sight scenarios, while learning-based methods couple model parameters tightly to the training scene, requiring costly retraining whenever the base station (BS) configuration or propagation environment changes. In this paper, we propose RA-LWLM, a retrieval-augmented in-context localization framework that achieves training-free cross-scene adaptation by externalizing scene-specific information into a per-scene fingerprint database rather than encoding it in model weights. The framework consists of three components: a frozen wireless foundation model (FM) encoder that maps raw channel state information into a scene-agnostic representation; a retrieval module that selects the most informative references from the per-scene database via similarity search in the representation space; and a transformer-based in-context learning (ICL) module that fuses the query with the retrieved references to predict the user equipment (UE) position. To accommodate varying retrieval quality and propagation complexity across queries, the ICL module adopts a mixture-of-experts design in which experts specialize in different context sizes and are softly combined by a learnable selector. Extensive ray-tracing-based experiments across heterogeneous scenes with diverse BS configurations show that RA-LWLM achieves nearly identical accuracy on seen and unseen scenes without any per-scene retraining, substantially outperforming end-to-end and FM-based baselines. These results validate the proposed retrieval-augmented in-context paradigm as a scalable solution for cross-scene localization in 6G networks.

Translating user intents into physical radio signals represents the critical yet notoriously tedious final step in wireless prototyping, as it requires intricate knowledge of physical layer details and presents immense implementation challenges. Large Language Models (LLMs) and multi-agent systems have revolutionized conventional software engineering, raising the compelling question of whether they can resolve these formidable difficulties. However, our investigations reveal that current models experience significant limitations and fail to accomplish this task when applied to radio signal generation. This performance degradation primarily stems from severe domain ignorance and a fundamental insensitivity to physical hardware constraints. To bridge this gap, we introduce RadioMaster, a fully autonomous multi-agent framework designed to seamlessly translate user input into real-world wireless emissions. RadioMaster operates on three synergistic pillars: RadioWiki for domain-specific knowledge retrieval, RadioAgent for collaborative I/Q sample generation alongside hardware configuration, and RadioEmulator for closed-loop physical layer verification. Furthermore, we construct RadioBench, the first comprehensive benchmark tailored specifically for the radio signal generation domain. Extensive real-world evaluations demonstrate that RadioMaster significantly outperforms state-of-the-art (SOTA) baselines regarding configuration viability and signal fidelity.

A long-standing challenge in distributed wireless systems is ensuring efficient and fair random channel access. Existing solutions often address specific constraints related to timing, periodicity, or centralization, but they typically rely on fixed heuristics. Motivated by recent advances in machine learning (ML), we investigate whether ML agents can autonomously learn efficient and fair access strategies, and whether such learning can offer new insights into medium access control (MAC) design. Rather than proposing a deployable protocol, our aim is to examine whether decentralized learning can rediscover or approximate theoretically efficient random-access mechanisms under minimal assumptions. To this end, we deploy an off-policy Double Deep Q-Network (DDQN) with Bayesian inference to train agents operating over a slotted channel. The resulting method is fully online (no pre-training), fully distributed (independent multi-agent learners), stochastic (non-periodic), and requires no coordination or explicit communication. Extensive simulations show that the learned strategy adapts to varying network conditions and achieves near-theoretical efficiency while maintaining fairness. Ablation studies further reveal that the learned behavior resembles slotted ALOHA with a dynamically adjusted transmission probability, leading us to refer to the method as KISS: Keeping It Simple and Slotted.

Wireless digital twins require repeated synchronization between a time-evolving physical scene and its digital counterpart under limited and time-varying communication resources. For perception-centric twins, pixel-domain transmission or uniformly protected bitstreams can be mismatched to the semantic state consumed by twin-side applications. This paper proposes TWIST, a closed-loop token synchronization framework for application-aware wireless digital twins. TWIST represents each physical observation as a token and synchronizes this state over a wireless link, rather than optimizing visual reconstruction. Token positions are grouped by task relevance and protected through mode-conditioned unequal error protection under low-, medium-, and high-synchronization modes. At the twin side, decoding confidence converts unreliable hard token decisions into erasures, which are restored by a completion model before updating the semantic twin state. The recovered state supports traffic-state inference and generates compact feedback statistics, including channel quality, receiver uncertainty, semantic drift, and application priority, for subsequent mode adaptation. Experiments on a dynamic road-scene digital-twin scenario show that TWIST improves traffic-state inference and semantic twin-state synchronization compared with fixed-mode and channel-only adaptation strategies, while reducing the average synchronization cost relative to always-high transmission.

Machine learning deployments in real-world wireless communication tasks face significant generalization challenges due to location and environment-specific signal structure, high diversity in data across different deployments, and limited availability of real-world data. Current approaches for assessing data similarity between training and inference (deployment) distributions, as well as evaluating model transferability, suffer from high computational costs and inconsistent performance, leaving critical model deployment and model life cycle management decisions without a principled foundation. To address this, we introduce a dataset similarity framework built upon the feature space of a pretrained wireless foundation model. Our method, LWM-CDE (Contrastive learning of Dataset Embedding), fine-tunes the dataset embeddings of the foundation model using a combination of contrastive and geometry-shaping losses, creating a structured manifold where distance reliably indicates transferability. Extensive experiments on wireless benchmarks show that LWM-CDE achieves stronger correlation with empirical transfer performance than existing metrics while being more computationally efficient. The learned representation space supports more effective and data-efficient decision-making for tasks like source dataset selection, label-aware augmentation, and budgeted pretraining, demonstrating its broader utility across different wireless communication applications.

Tokens are becoming the basic units through which foundation models represent and process information for understanding and inference. However, traditional wireless communication, centered on bit-level fidelity, faces a mismatch between what is transmitted reliably and what downstream models actually consume. This mismatch calls for a communication design that directly accounts for token-level task relevance and downstream model requirements, rather than treating all transmitted bits as equally important. In this paper, we propose TONIC, a token-centric semantic communication framework for task-oriented wireless systems. The transmitter converts each source sample into a sequence of tokens, estimates token-level task relevance, and allocates protection through utility-aware unequal error protection under a fixed channel-use budget. At the receiver, token-level confidence is used to gate unreliable decisions, turning harmful substitutions into recoverable erasures before a Transformer-based completion model restores the masked tokens for final task inference. Our framework combines transmitter-side semantic-aware protection with receiver-side confidence-aware gating in a modular and interpretable architecture, rather than relying solely on fully black-box end-to-end learning. We further establish a utility-aware Bayes-risk interpretation for the receiver-side gating rule and study its interaction with unequal protection and completion. Experimental results on image classification show that TONIC consistently outperforms separation-based schemes, the pixel-domain DeepJSCC baseline, and token-domain baselines under matched communication budgets over AWGN, Rayleigh, and Rician channels.

Reward-poisoning attacks present a significant risk to learning-based wireless control systems. Given this, we propose a Disagreement-Guided Reward Poisoning (DGRP) adaptive attack on a Soft Actor-Critic (SAC) agent. In a Cognitive Radio Network (CRN) environment assisted by Reconfigurable Intelligent Surfaces (RIS), the SAC agent is tasked with maximizing the long-term secondary users' (SUs) rate by simultaneously optimizing the transmission power of the SU transmitter and the RIS phase shifts. DGRP corrupts rewards, particularly when the SAC dual critics exhibit substantial disagreement-especially in high-leverage, high-uncertainty states-resulting in distorted value estimations and guiding the policy towards suboptimal actions. Our findings demonstrate that DGRP substantially diminishes the performance improvements typically provided by RIS and degrades transmission quality. We further investigate key attack parameters and determine their impact on learning. In comparison to periodic-timing and exploration-triggered baselines, DGRP consistently causes greater damage, highlighting the necessity of considering disagreement-aware threats when evaluating the robustness of Deep Reinforcement Learning (DRL) in RIS-assisted networks.

Wireless networks support multi-user (MU) communication with multiple-input multiple-output (MIMO) and orthogonal frequency-division multiple access (OFDMA) technologies. In the joint MU-MIMO-OFDMA-enabled transmission mode, network throughput can be significantly increased by effectively utilizing the multi-channel resources to schedule numerous wireless users/stations (STAs) simultaneously. In this paper, we study ways to optimize the user scheduling and resource allocation (SRA) for the UL scheduled access (UL-SA) of a joint MU-MIMO-OFDMA-enabled wireless local area network (WLAN). In particular, we propose a multi-agent (MA) framework that utilizes an openly available pretrained small/medium-sized Language Model (xLM) to perform SRA for the UL-SA. To facilitate autonomous SRA using our proposed technique, we introduce the AI-assisted Wireless Systems Engineering and Research (WiSER) platform. We evaluate the performance of MAxLM-optimized SRA for network scenarios with a varying number of STAs and antenna settings on the WLAN Access Point. Numerical results confirm that our proposed technique achieves higher UL-SA throughput than the benchmark techniques.

Conventional wireless networks rely on instantaneous channel state information (CSI) and react to channel variations without explicitly modeling the physical environment, limiting their ability to handle blockage, mobility, and interference in dynamic deployments. Paradigms such as Integrated Sensing and Communication (ISAC) add sensing capabilities but lack explicit environment modeling and decision-making. In this article, we propose Physical-AI: a new architecture for environment-aware wireless networking, where radio signals enable sensing, modeling, and interaction with the environment in addition to data transmission. The framework proposes a self-supervised spatiotemporal radio foundation model for transforming distributed radio observations into a shared latent environmental representation. Multiple inference heads operate on this representation to estimate key environmental properties, including blockage, user distribution, mobility dynamics, and interference structure. A task-specific neural decision layer maps this representation to proactive, context-aware control actions. By integrating perception, world modeling, and decision-making in a closed loop, the proposed framework goes beyond ISAC and establishes Physical-AI as a promising architecture for intelligent 6G systems. Simulation results show that the proposed predictive framework reduces outage probability and blockage-response latency, particularly under increasing beam-switching delays.

Wireless foundation models are rapidly emerging as a key enabler of AI-native communication systems, yet a fundamental question remains unanswered: how large should these models be? We present a principled, physics-grounded answer, showing that the intrinsic dimensionality (dNL, the nonlinear manifold dimension of the channel) acts as the fundamental bottleneck, defining the scaling ceiling once a data-sufficient regime is reached. This dimensionality is not a design choice but a physical constraint: Maxwell's equations, finite scatterers, and antenna aperture inherently constrain wireless propagation environments to a limited number of degrees of freedom -- spanning 5-35 across both real-world OTA measurements and 3GPP-standardized channel models we evaluate -- orders of magnitude below the ~1,000-dimensional semantic space of language. As a consequence, we propose a scaling framework for wireless AI: taking NTN satellite channels as a representative case (dNL ~= 14), scaling gains diminish rapidly beyond ~30 million parameters, entering a stochastic asymptote above 70M where a further 1.6x increase (96M->150M) yields only 0.52 dB. Beyond this ceiling, inference-time adaptation via pilot-aided test-time training (TTT) is far more effective: a compact 12M-parameter model surpasses a static 96M model by 9.9 dB (NMSE, SNR = 20 dB) / 7.6 dB (MCM, SNR = 10 dB) at one-eighth the parameters. With dNL distributions validated across real-world indoor massive MIMO measurements, our scaling laws and TTT gains are demonstrated through NTN satellite simulations, reframing wireless AI design: channel geometry -- not model size -- fundamentally governs the scaling laws of physical-layer wireless AI.

Agentic artificial intelligence (AI) shows promise for automating O-RAN wireless supervisory control, but translated intents still require an executor-side decision before live network actuation. Existing control flows lack explicit semantics for whether an intent should commit, gate for evidence, or reject under stale telemetry, concurrent policies, deadline and bandwidth limits, and rollback constraints. We propose Progressive Risk-Gated Actuation (PRGA), an executor-side contract for risk-gated wireless intent execution. PRGA structures each intent into executable local triage (C0), on-demand coordination evidence (C1), and post-hoc provenance support (C2), with C2 kept off the online safety path. A deterministic two-stage policy checks expiry, freshness, rollback-handle validity, local conflict, blocking preconditions, and planner-executor risk divergence from C0, then retrieves C1 only for gated intents when deadline and bandwidth budgets allow; evidence-mandatory gates reject when required C1 is unavailable. On two 3GPP-parameterized energy-saving and slice-SLA benchmarks, PRGA reduces time-to-first-safe-action by 23.3-27.4% and per-commit control-plane bytes by 52.7-54.2% against a decision-identical eager full-evidence cost-overlay comparator, thereby isolating retrieval-cost accounting; remains non-inferior within a pre-declared 0.5 percentage-point unsafe-action margin against an invariant-respecting static-threshold comparator; and rejects 100% of injected over-threshold stale inputs in the stale-state fault campaign. On these benchmarks, PRGA improves supervisory responsiveness and control-plane efficiency within the evaluated unsafe-action boundary.

The increasing use of token-based representations in language-driven applications has motivated wireless token communication, where tokens are treated as fundamental units for transmission. However, conventional communication systems overlook dependencies among tokens and allocate transmission resources uniformly, leading to inefficient use of limited wireless resources under channel impairments. In this paper, we propose a context-aware token communication framework that leverages a masked language model (MLM) as a shared contextual model between the transmitter (Tx) and receiver (Rx). At the Rx, we develop a context-aware token detection method that integrates channel likelihoods with MLM-based contextual priors under a Bayesian formulation, enabling robust token inference over noisy channels. At the Tx, we propose a context-aware token masking strategy that selectively omits tokens that can be reliably inferred at the Rx, allowing the available power budget to be concentrated on more informative tokens. These components are jointly designed through a shared MLM, establishing a unified Tx-Rx framework for efficient token transmission and detection. Simulation results demonstrate that the proposed framework significantly improves reconstruction performance compared to conventional and existing token communication schemes, achieving up to 1.77X and 1.63X performance gains on the Europarl corpus and WikiText-103 datasets, respectively.

Jamming attacks are proliferating and pose a significant threat to the security of 5G and beyond networks. These attacks target 5G radio frequency (RF) domain and can disrupt the communication in wireless networks. While conventional machine learning and deep learning approaches demonstrate its potential for jamming detection, they typically require centralized data collection, compromising the privacy of user equipment (UEs). This work proposes a federated learning (FL)-based jamming detection framework that operates on over-the-air In-phase and Quadrature (IQ) samples extracted from Synchronization Signal Blocks (SSBs) in the RF domain. The framework enables collaborative model training across multiple UEs without sharing raw RF signal data. We adopt Federated Averaging (FedAvg) algorithm to train a 1D convolutional neural network (1DCNN) for effective detection of attacks. Numerical results demonstrate that the proposed FL framework achieves 97% accuracy and 97% F1-score, outperforming centralized baselines including MLP, 1DCNN, SVM, and logistic regression, while preserving the data privacy of all participating UEs

Communication is a core enabler for multi-robot systems (MRS), providing the mechanism through which robots exchange state information, coordinate actions, and satisfy safety constraints. While many MRS autonomy algorithms assume reliable and timely message delivery, realistic wireless channels introduce delay, erasures, and ordering stalls that can degrade performance and compromise safety-critical decisions of the robot task. In this paper, we investigate how transport-layer reliability mechanisms that mitigate communication losses and delays shape the autonomy-communication loop. We show that conventional non-coded retransmission-based protocols introduce long delays that are misaligned with the timeliness requirements of MRS applications, and may render the received data irrelevant. As an alternative, we advocate for adaptive and causal network coding, which proactively injects coded redundancy to achieve the desired delay and throughput, enabling relevant data delivery for the robotic task. Specifically, this method adapts to channel conditions between robots and causally tunes the communication rates via efficient algorithms. We present two case studies: cooperative localization under delayed and lossy inter-robot communication, and a safety-critical overtaking maneuver where timely vehicle-to-vehicle message availability determines whether an ego vehicle can abort to avoid a crash. Our results demonstrate that coding-based communication significantly reduces in-order delivery stalls, keeps cooperative-localization accuracy close to the ideal baseline, and satisfies the overtaking abort deadline in 80% of the simulated runs, compared with 60% for a retransmission-based baseline. The study highlights the need to jointly design autonomy algorithms and communication mechanisms, and positions network coding as a principled tool for dependable MRS operation over wireless networks.

Semantic communications aim to enhance transmission efficiency by jointly optimizing source coding, channel coding, and modulation. While prior research has demonstrated promising performance in simulations, real-world implementations often face significant challenges, including noise variability and nonlinear distortions, leading to performance gaps. This article investigates these challenges in a multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM)-based semantic communication system, focusing on the practical impacts of power amplifier (PA) nonlinearity and peak-to-average power ratio (PAPR) variations. Our analysis identifies frequency selectivity of the actual channel as a critical factor in performance degradation and demonstrates that targeted mitigation strategies can enable semantic systems to approach theoretical performance. By addressing key limitations in existing designs, we provide actionable insights for advancing semantic communications in practical wireless environments. This work establishes a foundation for bridging the gap between theoretical models and real-world deployment, highlighting essential considerations for system design and optimization.

We present a novel machine-learning (ML) approach (EM-GANSim) for real-time electromagnetic (EM) propagation that is used for wireless communication simulation in 3D indoor environments. Our approach uses a modified conditional Generative Adversarial Network (GAN) that incorporates encoded geometry and transmitter location while adhering to the electromagnetic propagation theory. The overall physically-inspired learning is able to predict the power distribution in 3D scenes, which is represented using heatmaps. We evaluated our method on 15 complex 3D indoor environments, with 4 additional scenarios later included in the results, showcasing the generalizability of the model across diverse conditions. Our overall accuracy is comparable to ray tracing-based EM simulation, as evidenced by lower mean squared error values. Furthermore, our GAN-based method drastically reduces the computation time, achieving a 5X speedup on complex benchmarks. In practice, it can compute the signal strength in a few milliseconds on any location in 3D indoor environments. We also present a large dataset of 3D models and EM ray tracing-simulated heatmaps. To the best of our knowledge, EM-GANSim is the first real-time algorithm for EM simulation in complex 3D indoor environments. We plan to release the code and the dataset.