Contact-Rich Robotic Manipulation

Human hand-object demonstrations provide dense reference motions for training dexterous manipulation reinforcement learning (RL) policies through reference tracking. However, to use such demonstrations for RL policy learning, retargeting must preserve hand pose and task-relevant hand-object contact structure. Otherwise, contact and feasibility artifacts can degrade downstream RL policy performance. We introduce TopoRetarget, an interaction-preserving retargeting framework that uses a single set of parameters across diverse retargeting conditions while maintaining task-relevant hand-object interaction and adapting human demonstrations to dexterous robot hands. The method constructs a sparse interaction graph over hand and object keypoints and optimizes distance-weighted Laplacian deformation with directional consistency, kinematic constraints, and penetration handling. Evaluations show that the generated references improve both interaction fidelity and policy learning: TopoRetarget achieves the best contact precision and alignment over all baselines on the ContactPose Dataset, improves Pen-Spin training success by 40.6 percentage points over the existing baseline methods, and enables zero-shot transfer to Wuji Hand hardware on cube reorientation and pen spinning.

Modern tactile-language models (TLMs) have shown potential for robot learning tasks, such as material and texture recognition. However, for contact-rich scenarios, these TLMs struggle to understand the physical properties of dynamic objects, such as rotation and sliding directions. For instance, our preliminary experiments reveal that popular TLMs, such as Sparsh and AnyTouch2, exhibit weak performance on basic rotation direction reasoning from GelSight Mini tactile data. This surprising gap inspires us to explore a novel research question: Can we inject physically grounded geometric priors into TLMs to enable reliable contact orientation reasoning of dynamic object properties? To this end, we propose GeoTLM, a novel geometric representation-guided TLM for the perception of dynamic contact events. Our key idea is to preserve and structure tactile shear-field geometry before language-level reasoning, rather than forcing low-resolution tactile tokens into fragile closed-form physics operators. To achieve this, we propose a lightweight (only 14k parameters) yet novel Differentiable Geometric Representation (DGR). Specifically, DGR learns a contact-mask-guided representation in the shear field and aggregates it through an antisymmetric seven-region pooling design, motivated by the physical intuition that rotational contact produces antisymmetric deformation patterns. We conduct experiments on two representative tasks: rotation direction and sliding direction reasoning. Extensive experiments show that GeoTLM improves novel-object rotation accuracy by +14.6% and real-sensor sliding accuracy by +16.2% over the same backbone without the geometric encoder. Overall, our work paves a new way for physically grounded tactile-language reasoning, with strong potential for dynamic object understanding and contact-rich robotic manipulation.

Dexterous grasping depends on contact regulation, not motion alone. Stable manipulation requires fingers to maintain appropriate object loading as contacts slip, deform, or become visually occluded. Existing cross-embodiment dexterous policies unify motion through retargeted hand poses or latent actions, but force feedback remains tied to each hand's sensing and actuation, limiting transfer. This work introduces a cross-embodiment force-position interface for contact-aware manipulation across heterogeneous dexterous hands. Motion intent is represented in a shared hand-pose latent, while each hand's effort signal is calibrated through system identification into physical joint torque in N.m. These torques are mapped to fingertip forces and compact per-finger load descriptors, giving the policy comparable observations of where the hand should move and how the object is loaded. Using this interface, a flow-matching visuomotor policy is trained on vision, proprioception, and calibrated contact, with structured visual masking that encourages reliance on force under grasp-relevant occlusion. The same calibrated signal drives a hybrid force-position controller for demonstration collection and execution, keeping force targets consistent across training and deployment. Experiments across structurally different hands show that calibrated contact feedback enables transferable compliant grasping, with learned primitives reusable in long-horizon manipulation pipelines.

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

Dexterous interaction with articulated objects is important for household, assistive, and humanoid manipulation, where multi-finger hands can provide compliant contact patterns beyond parallel-jaw grasping. However, articulated-object manipulation differs from static-object manipulation: the target part cannot be directly actuated, and its motion must emerge through sustained physical hand--handle contact. This makes the transition from object-centric articulated generation to hand-driven dexterous hand--object interaction non-trivial, since geometric trajectory replay or open-loop execution does not model the contact dynamics required to move the articulated part. Moreover, policies trained only for task completion under fixed dynamics can overfit nominal contact loads, especially without tactile or force feedback, and may degrade when the contact load changes. To address these challenges, we present DragMesh-2, a contact-driven framework for dexterous interaction with articulated objects that extends articulated interaction from object-centric generation to hand-driven dexterous hand--object interaction, where articulated motion must arise through physical contact. We further propose PICA, a physically informed contact-aware training mechanism that injects physical signals into policy learning without tactile or force feedback, improving robustness and task success under changing contact loads. Finally, we conduct systematic evaluation across multiple damping conditions and articulated-object categories to study robustness under contact-load variation, and provide a pure-geometry dexterous interaction resource to support future loco-manipulation and humanoid hand--object interaction research. Across seven GAPartNet objects, DragMesh-2 achieves stronger robustness under contact-load variation than the compared methods while maintaining high task success across damping conditions.

Inference-time steering adapts pre-trained generative robot policies during deployment by verifying candidate actions before execution. While prior methods typically perform this verification only with visual observations, vision alone is often insufficient for contact-rich manipulation, where success depends on both global task progress and subtle local interactions such as contact force. We introduce ViTaL, a visuo-tactile inference-time steering framework that formulates multimodal guidance as a bi-level optimization problem. At the high level, visual sampling-and-verification performs long-horizon mode selection, deciding what behavior the robot should execute. At the low level, tactile-guided diffusion editing refines the selected action sequence over a shorter horizon to satisfy local contact requirements. To support outcome-based steering, ViTaL learns a visuo-tactile latent world model and employs semantically aligned visual and tactile verifiers, including a novel text-conditioned tactile reward that scores predicted tactile futures directly in latent space. Across three real-world contact-rich manipulation tasks, ViTaL improves overall success by 51% over the base policy, outperforms unimodal steering by at least 33%, and exceeds naive multimodal fusion by at least 20%. Website: https://yilin-wu98.github.io/vital_website.

Physical human-robot interaction (pHRI) in real-world settings exposes operators to fluctuating environmental conditions during contact-rich tasks. Traditional task-centric evaluations overlook the physiological burdens imposed by these stressors. Therefore, we conducted a multimodal empirical study involving contact-rich tracing tasks under 18 distinct combinations of temperature, acoustic noise, and illuminance. Synchronously, we recorded electrodermal activity (EDA), surface electromyography (sEMG), eye-tracking data, and subjective environmental comfort ratings. Evaluating these physiological signals alongside execution data revealed hidden physiological costs not captured by objective performance. The results revealed that task performance remained stable across all environmental conditions. Autonomic workload, indexed by tonic skin conductance level (SCL), increased with temperature, while physical and cognitive workload were unaffected. Perceived environmental comfort showed no significant association with tracing error or completion time. These findings reveal a compensatory mechanism where operators maintain consistent performance by increasing their physiological effort to suppress thermal discomfort. Such insight motivates the development of physiology-aware control architectures that leverage real-time physiological metrics to reduce operator workload in unstructured environments.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

Humans rely on directional fingertip forces to probe and regulate contact during manipulation, yet most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous. Without directional cues, users must infer contact force from vision alone, often leading to over-pressing, inconsistent control, and reduced precision in robotic teleoperation. We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback. Through benchtop validations and a user study involving haptic teleoperation of a robotic arm and hand, we demonstrate that compared to visual-only and single-axis haptic baselines, planar fingertip feedback significantly reduces contact force error during precise manipulation, improves trial-to-trial consistency, and enhances overall user experience in axial probing tasks. These findings establish the N2D Haptic Glove and directional finger-based haptics devices as a promising modality for contact-rich teleoperation, immersive virtual reality simulations, and robot learning from demonstrations. N2D Haptic Glove's hardware and software system will be fully open-sourced at this https URL.

Contact-rich manipulation poses a fundamental challenge for world models: visual and tactile observations capture different aspects of physical interaction, and their utility depends critically on how this information is represented. We introduce ContactWorld, a controlled benchmark and empirical study of vision-tactile representations across 12 contact-rich manipulation tasks. Using a fixed world-model architecture, training procedure, and planning framework, we examine representation effects through three complementary properties: spatial fidelity, motion coherence, and predictive stability. Point clouds preserve task-relevant geometry and track physical motion more reliably than image observations, helping explain their higher average planning success of 32.1%, compared with 20.7% and 22.0% for wrist- and front-view RGB, respectively. Tactile observations generally reduce long-horizon prediction-error accumulation, but these gains do not translate uniformly into task success. Structured tactile force fields provide the most consistent downstream improvements, with PointCloud+TacFF achieving the highest overall simulated success rate of 36.1%. We further validate these trends through 900 physical trials spanning six tasks, two robot platforms, and three tactile sensing systems. Together, ContactWorld identifies sensory representation as a central design factor in vision--tactile world models and provides empirical guidance for predictive planning in contact-rich manipulation.

Whole-body humanoid manipulation of bulky, deformable, and shared-load objects requires distributed contact sensing and explicit force regulation, yet most imitation policies treat contact force only implicitly. On the other hand, different demonstration sources provide complementary modalities with inherent trade-offs: human demonstrations capture natural contact forces but not robot-executable actions, while teleoperation directly records robot actions but with less natural force regulation. This paper presents WT-UMI, a wearable whole-body tactile interface worn by human operators or mounted on humanoids, providing accurate observations of tactile images, contact forces, and end-effector poses across both human demonstration and humanoid teleoperation modes. We introduce a force-conditioned target-pose correction module that converts measured human poses into contact-aware robot targets by learning corrections from teleoperation data. To leverage the natural force interaction in human data, we propose a force-supervised planner that predicts end-effector pose chunks and contact-force trajectories. The predicted contact force serves as the reference for a tactile-based admittance controller. Across five contact-rich tasks spanning deformable objects, bulky rigid objects, and human--humanoid collaboration, WT-UMI improves success rate and reduces contact-position tracking error over four policy baselines. Our project page is available at https://wt-umi.github.io/WTUMI/.

Despite the success of vision-based generalist robotic policies, existing tactile-based policies remain tied to fixed embodiments and sensor setups. This is because tactile signals are highly heterogeneous across hardware, making cross-sensor generalization difficult. We present FTP-1,the first generalist foundation tactile policy pretrained to acquire transferable tactile manipulation abilities across diverse sensors and embodiments. FTP-1 supports varied tactile inputs, including image-, array-, and state-based signals, by using heterogeneous encoders to project them into unified morphology-aware latent tokens that are jointly modeled by a shared tactile Transformer expert. Pretrained on around 3,000 hours of tactile manipulation data aggregated from 26 data sources, spanning human and robot demonstrations across 21 sensors, FTP-1 learns tactile skills that transfer beyond the sensors seen during pretraining. Across downstream finetuning experiments spanning 5 hardware configurations, FTP-1 improves contact-rich manipulation on seen sensor setups by +17.2% and, surprisingly, transfers to two previously unseen tactile-sensor setups, achieving a +31% gain in success rate. FTP-1 establishes the first unified foundation baseline for tactile manipulation, providing future tactile policies with a shared model-level starting point. Pretrained models, datasets, training code and more visualization at https://ftp1-policy.github.io.

Humanoid-Object Interaction (HOI) is a fundamental capability for humanoid robots, yet it remains challenging due to the tight coupling between dynamic balance and stable interaction with diverse objects. Existing methods often require time-consuming task-specific policy training or rely on rigid trajectory replay, which limits their ability to accommodate novel interaction scenarios. In this work, we present GenHOI, a simple yet effective framework that enables humanoid robots to perform diverse object-interaction tasks in a zero-shot manner by directly imitating a single generated video, without task-specific training or physical demonstration data. GenHOI first reconstructs the robot-object scene in simulation and renders a first-frame image, which, together with the language command, conditions the synthesis of a task-oriented interaction video. The generated video is then analyzed to identify interaction-relevant contact events and estimate hand-object contact regions, which are encoded as object-centric geometric constraints that convert visual interaction cues into physically grounded optimization priors. Guided by these priors, the reference motion recovered from the video is refined and smoothed to resolve the scale ambiguity inherent in 2D video generation, while adapting a single reference trajectory to unseen robot-object relative poses. The optimized trajectory is finally executed by a closed-loop tracking controller. We validate the proposed framework in extensive simulation and real-world experiments across diverse object-interaction tasks, including box grasping, asymmetric bimanual chair carrying, table lifting from below, and cylindrical-object enveloping.

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below $0.04^\circ$ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a $120^\circ$ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

Vision-Language-Action (VLA) models have demonstrated remarkable zero-shot generalization in robotic manipulation, yet the vast majority of pre-trained pipelines remain strictly confined to low-DoF parallel grippers. Adapting these rich semantic priors to high-DoF dexterous hands introduces a severe morphology gap, direct end-to-end joint fine-tuning inherently causes catastrophic forgetting of spatial reasoning and acute action manifold collapse due to data scarcity. In this paper, we present InDex, a novel, data-efficient adaptation framework rooted in cross-morphology semantic inheritance. Rather than discarding the pre-trained 1-DoF parallel grasp output, we repurpose it as a continuous, macroscopic virtual grasp intent proxy to sequentialize the control topology. We implement a two-stage decoupled learning architecture: the first stage parameter-efficiently aligns the VLA backbone to predict continuous arm trajectories and the scalar grasp intent; the second stage freezes this spatial backbone and leverages an intent-conditioned denoising diffusion head to decode fine-grained joint articulations for multi-fingered end-effectors. Extensive simulation benchmarks across a suite of multi-stage, contact-rich dexterous manipulation tasks demonstrate that InDex effectively masters intricate skills with minimal demonstration data, substantially outperforming monolithic baselines while preserving the robust spatial generalizability of the original VLA prior.

Vision-language-action (VLA) models provide strong visual, language, and action priors for robot manipulation, but visual observations alone often miss the local contact state required for contact-rich tasks. We present TacCoRL, a scalable framework that injects Tactile feedback into VLA policies and improves them through sim-real Co-training and simulation-based reinforcement learning (RL), without requiring large-scale tactile pretraining or extensive real-world contact exploration. The key idea is not only adding touch as an input, but learning how contact readings should modulate action responses in near-failure states that are rare in demonstrations and risky to collect on hardware. We use a real-aligned simulator as a closed-loop training environment for contact interaction. Mixed simulated and real trajectories first warm-start tactile-conditioned actions in the pretrained policy. Reinforcement learning with verifiable task rewards then optimizes the policy using simulated contact rollouts. It reinforces tactile-conditioned actions that lead to task completion, while a supervised objective on real trajectories keeps the refined policy anchored to deployment visual, tactile, and action distributions. The resulting policy transfers directly to the real robot without privileged simulation state or online real-world RL. Across four bimanual contact-rich tasks, the final visuo-tactile policy achieves an average success rate of 72.5%, compared to baseline of 50.0%. Result videos and more details are available at https://tac-corl.github.io/

Contrastive Reinforcement Learning (CRL) has seen recent success in a wide variety of goal-conditioned robotics tasks by learning structured representations of the dynamics. However, despite its success in locomotion and simpler control domains, CRL often struggles in interaction-rich manipulation. We argue that a key source of this difficulty is object-centric interaction, such as contact or grasping, that induces distinct changes in the underlying dynamic modes. In this work, we formulate manipulation dynamics as a piecewise-smooth Markov process and show that interaction-induced mode changes create piecewise nonlinear reachability structures that are difficult for standard CRL energy functions to represent and plan over. Based on this analysis, we introduce Interaction-weighted Resampling (IWR). IWR performs interaction-aware resampling around phases before, during, and after interactions, encouraging the learned representation to preserve the mode boundaries that determine future reachability to capture multi-modal and piecewise nonlinear reachability. Across interaction-centric environments, including 2D dynamic control, robotic manipulation, and robot air hockey, IWR improves both sample efficiency and overall performance over prior CRL methods, with 19.8% average improvement in simulation. Finally, using a sim-to-real pipeline with policies trained by IWR, we demonstrate the first real-world goal-conditioned robot air hockey agent capable of hitting goals, improving success from 25% to 60%. Project Page: IWR-arxiv.github.io.

Contact-rich manipulation requires robots to continuously perceive and regulate evolving physical interactions under dynamic contact transitions or complex surface geometries. Recent imitation learning methods improve contact-aware control by incorporating tactile or force feedback, but they rarely model the asymmetric spatiotemporal roles of global force and local tactile sensing. To address this, we propose TacForeSight, a lightweight force-conditioned tactile foresight framework for real-time manipulation. The core component is TacForceWM, a tactile world model that predicts short-horizon tactile latent dynamics from dual-finger tactile observations conditioned on high-frequency wrist force and torque signals. Another key component, the Predictive Tactile-Conditioned Policy, leverages the predicted latents as anticipatory contact priors, models the current-to-future tactile evolution via cross-attention, and adaptively fuses visuo-tactile features through a tactile-guided gating module. By forecasting purely within a compact latent space, TacForeSight enables proactive contact reasoning with efficient real-time inference suitable for high-frequency manipulation control. Real-robot experiments on five representative tasks and three in-process perturbation settings show that TacForeSight consistently outperforms existing baselines, particularly under dynamic contact disturbances. All models and datasets will be made publicly available on the project website at https://tacforesight.github.io/ProjectPage.

Real-world robotic manipulation tasks often involve forceful interactions with the environment, such as using tools of varying weights, transporting objects with different masses, and performing contact-rich tasks like table wiping. Previous learning-based approaches typically employ imitation learning policies that output target end-effector poses tracked by low-level impedance controllers. In these systems, forceful interactions are either implicitly realized through steady-state tracking errors or explicitly commanded using wrist force/torque or tactile sensors. However, implicit approaches generalize poorly across object weights, while explicit approaches require specialized hardware and increase system complexity. In this work, we propose IMPACT, a framework that decouples these forceful tasks into task-planning and internal-model-based predictive control. Extensive simulation and real-world experiments demonstrate that the proposed framework achieves higher success rates and improved generalization to unseen object weights, as well as better safety and energy efficiency.

Learning from human video demonstrations remains challenging due to noisy hand-object interactions, unseen objects with partial observation, and cross-embodiment discrepancy. To address these challenges, we present HOWTransfer (Hand-Object Open-World Transfer), a hand-centric framework that distills human demonstrations into contact-aware, taxonomy-informed, and diverse robotic trajectories. Instead of relying on object-specific descriptions, vision-language queries, or explicit object-state tracking, HOWTransfer recovers temporally consistent 3D hand motion and localizes temporal contact intervals by reasoning over observed hand-object interaction cues. The localized contact onsets are then used to retarget human grasp intent into multi-modal parallel-jaw grasp hypotheses, which are propagated along the recovered wrist trajectory to generate robot-executable motions. Finally, a trajectory editing stage refines contact alignment and produces diverse executable variants from a single demonstration. Experiments across diverse manipulation tasks show that HOWTransfer enables accurate contact localization and high-quality robot motion retargeting with $86\%$ success, which is preferred over teleoperated trajectories in a blinded preference study.

Force and tactile sensing are indispensable in contact-rich manipulation. However, force-aware robot learning faces critical challenges due to the incompatible assembly of tactile and force sensors in handheld or wearable devices. To address these limitations, we first introduce AetheRock for gripper-force, vision, and tactile data collection, which is an arm-worn device featuring a modular and easily manufactured visuo-tactile sensor, GelSlim-MiniFab, at the fingertip, a resistive pressure sensor at the human finger contact region, a customized PCB module, and a wearable kit for comfortable and robust collection. Building on this, we propose ForceVT, a representation learning framework that uses force and vision to guide fidelity-agnostic tactile learning, enabling robust inference in any tactile situation. Real-world experiments show that AetheRock achieves qualified data efficiency and that ForceVT effectively alleviates inefficiencies when visuo-tactile sensors exhibit manufacturing and utilization inconsistencies. Overall, our work mitigates the limitations of gripper-force vision-tactile robot learning through innovative hardware design and algorithms.

Vision-Language-Action (VLA) models have become a powerful framework for robotic manipulation, and recent studies have introduced tactile or force feedback into VLAs to address contact-rich tasks. However, these models are typically deployed as offline policies. When contact conditions shift from the training distribution, the policy cannot perform online adaptation, leading to problems such as inappropriate contact forces and inefficient retries. Therefore, we propose TORL-VLA, a tactile-guided online reinforcement learning framework that couples tactile feedback with policy refinement for contact-rich manipulation. Our method introduces a tactile-derived wrench-aware VLA to predict reference actions and future wrench sequences, while a lightweight online RL module is used to refine the reference actions. To stabilize learning from mixed exploratory policy-generated and human-intervention data, we introduce an intervention-censored critic that prevents post-intervention success from being wrongly credited to policy-generated actions preceding intervention. Real-robot experiments on long-horizon contact-rich tasks, including latch manipulation, coffee-cup placement, and egg handling, show that TORL-VLA improves success rates at both subtask and full-task levels, as well as time-bounded execution efficiency over strong baselines. Project page: https://torl-vla.github.io/

Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by $26.7$ percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9$\times$ faster training and 1.8$\times$ faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

Robotic manipulation robustness often founders on the physics gap between simplified simulations and the resistance-laden real world. In this work, we emphasize that physical realism in articulated interaction is an important ingredient for robust policy learning. We present Real-IKEA, a dataset and simulation framework designed with physical accuracy as a first-class goal. Real-IKEA provides 1,079 articulated asset configurations, derived from 83 authentic IKEA handles and knobs processed through a meticulous six-step physical workflow. For contact-geometry accuracy, we introduce a bidirectional surface-deviation metric to quantify collision meshes. For dynamics realism, we establish resistance-calibrated configurations that vary damping and friction. Crucially, we demonstrate through a Reinforcement Learning (RL) policy that high-fidelity assets enable the discovery of robust "hooking" and "levering" strategies that prioritize mechanical advantage over fragile friction-pulling. Together, these results position Real-IKEA as a critical benchmark for developing manipulation policies capable of human-level robustness in articulated object tasks.

Force signals provide critical interaction cues for contact-rich robotic manipulation. However, existing methods mostly use force as an additional observation modality, without fully exploiting its role in modeling future interaction dynamics or guiding execution-time feedback correction. In this paper, we propose FAWAM, a force-aware world action model that incorporates force information at three levels: perception, prediction, and closed-loop execution. FAWAM first encodes historical 6-axis force/torque signals to modulate action generation, then jointly predicts future actions and end-effector wrenches to explicitly model contact evolution. It further introduces a residual correction module that uses the predicted wrench trajectory as an execution-time reference to refine actions online based on real-time force feedback. Real-world experiments across multiple contact-rich tasks show that FAWAM improves the average success rate by 36.25% over vision-only baselines and 21.25% over existing force-aware baselines, demonstrating the effectiveness of our force-aware framework for robust contact-rich manipulation.

Egocentric RGB-D videos offer a natural source of human dexterous manipulation demonstrations, but existing data is difficult to use for robot learning because object pose, geometry, and contact information are often missing or require pre-scanned object assets. We present EgoAERO, the first framework that learns dexterous manipulation from a single egocentric RGB-D human demonstration without object assets. EgoAERO reconstructs contact-consistent hand-object trajectories through asset-free object tracking and reconstruction, ego motion compensation, and adaptive contact optimization, then converts them into robot policies using two-stage residual learning. We further introduce an online quality assessment mechanism and construct EgoDex-R, a large-scale egocentric dataset with 4.3M RGB-D frames for dexterous policy learning. Simulation and real-world experiments show that EgoAERO enables single-demonstration dexterous manipulation and achieves downstream performance close to CAD-based reconstructions on HOI4D.

Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose an effective architecture using modality-specific convolutional stems and transformer-based fusion that effectively integrates information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multisensory representation then conditions a flow-matching policy for solving downstream tasks. Our systematic study across five contact-rich manipulation tasks demonstrates the effectiveness of multi-resolution tactile features in imitation learning wherein MiTaS achieves an average success rate of 80 %, while vision-only (35.5,%) and visuotactile (55.5,%, 63,%) baselines cannot solve the task reliably. Project Page: http://mitas-touch.github.io.