Proprioception

In-hand object manipulation is a fundamental yet challenging capability for dexterous robots. Despite significant progress in dexterous manipulation, existing approaches rely heavily on vision or tactile sensing to track object states, while joint sensing -- the most readily available modality on any robotic hand -- remains largely overlooked, particularly for tendon-driven hands. In this paper, we study how far joint sensing alone can go by asking: (i) whether motor encoders or direct joint sensing provides better proprioceptive feedback, (ii) how to extract environment information from joint measurements, and (iii) whether joint-only control can achieve competitive real-world performance without external perception. We present the Proprioceptive Transformer (PT), an exteroceptive-free approach for continuous cube rotation on a tendon-driven dexterous hand that uses only joint sensing feedback. A teacher policy is first trained via reinforcement learning with privileged object information, then distilled into PT, which operates solely on joint position and velocity histories. The Transformer architecture effectively extracts implicit object state information from temporal patterns in joint sensor readings. Experiments on the real ORCA hand show that our approach achieves 3.1x higher rotation speed than baselines. We also demonstrate that our PT achieves a 23.4% lower RMSE for cube position estimation than the MLP baseline, indicating superior extraction of exteroceptive information from proprioceptive sources.

Autonomous navigation in GNSS-denied environments remains a core challenge for legged robots, where exteroceptive sensors such as LiDAR are prone to elevation drift in geometrically sparse or repetitive scenes. We present a factor graph architecture that augments the LIO-SAM framework with a parallel kinematic lane driven by proprioceptive leg odometry, coupled to the main LiDAR-inertial lane via an identity relative pose constraint with a selective noise model. Applied to a Linxai D50 quadruped platform across two outdoor loops totaling over one kilometer, our approach reduces elevation drift from over 30m to under 30cm and enables convergence in a scene where the baseline pipeline fails entirely. These results suggest that proprioceptive data, already computed onboard for gait control, constitutes a lightweight and effective vertical anchor for SLAM in GNSS-denied settings.

Vision-Language-Action (VLA) models have shown strong performance on embodied manipulation, yet they remain brittle under visual observation changes, paraphrased language instructions, and compounded perturbations. This limitation suggests that existing methods still rely heavily on shallow correlations in the training distribution, rather than learning stable couplings among task semantics, environment states, and action generation. Although recent efforts improve robustness through larger-scale training, post-training adaptation, or enhanced predictive modeling, they rarely enforce invariance-oriented consistency within the end-to-end policy itself. To address this issue, we propose RoVLA, a robust vision-language-action framework with multi-consistency constraints. RoVLA enforces consistency under three complementary transformations: instruction semantics, trajectory evolution, and observation perturbation. Specifically, Instructional Consistency (IC) promotes stable grounding under semantically equivalent instruction rewrites, Evolutionary Consistency (EC) preserves coherent action intent throughout the generation process, and Observational Consistency (OC) improves robustness to visual and proprioceptive perturbations by enforcing consistent predictions before and after targeted disturbances. By explicitly modeling these invariances during training, RoVLA reduces reliance on superficial correlations and improves robustness and generalization. Experiments on LIBERO-Plus, RoboTwin 2.0, and real-world manipulation tasks show that RoVLA consistently outperforms strong baseline methods and exhibits superior robustness under diverse task and observation shifts. These results demonstrate the effectiveness of multi-consistency learning for robust embodied control. Codes will be available at https://github.com/HCPLab-SYSU/RoVLA.

Humanoid and legged robots interact with the environment through intermittent contacts, making accurate motion estimation fundamentally dependent on reasoning about contact dynamics. However, standard sensing pipelines-whether based on onboard proprioception with Extended Kalman Filters (EKFs) or external motion capture systems-recover only kinematics, while contact forces, contact timing, and inertial parameters remain unobserved. As a result, purely kinematic reconstructions often violate rigid-body dynamics, particularly during contact-rich motions. To enable accurate motion estimation from onboard kinematics in real-world deployment, we propose PRIME (Physically-consistent Robotic Inertial and Motion Estimation), a Maximum A Posteriori (MAP) formulation that refines measured kinematics and actuator commands into a dynamically consistent trajectory while jointly estimating frictional contact forces and physically consistent inertial parameters. Our approach incorporates differentiable contact dynamics with smoothed complementarity constraints and an Anitescu-style friction model, yielding a smooth optimization problem that remains tractable across versatile contact transitions. We evaluate PRIME on contact-rich locomotion with quadrupedal robots and the Unitree G1 humanoid, demonstrating improved trajectory consistency and accurate inertial parameter identification. Beyond improving state estimation and feedback control with calibrated inertial parameters, PRIME produces force- and contact-annotated motion reconstructions from real robots in deployment, which can be used to provide high-quality data for downstream learning applications, including large-scale behavior modeling and robot foundation models.

Mild traumatic brain injury (mTBI) is a prevalent condition that remains difficult to diagnose in its early stages. Oculomotor dysfunction is a well-established marker of mTBI, motivating the development of portable tools that capture both eye-movement behavior and underlying neurophysiology. In this work, we present an initial framework that integrates electroencephalogram (EEG) with augmented-reality (AR)-based Vestibular/Ocular Motor Screening (VOMS) tasks to estimate subject-specific ocular response times. Pre-processed EEG signals, obtained through band-pass filtering and average referencing, are analyzed using a Redundant Discrete Wavelet Transform (RDWT)-driven deep neural framework. The RDWT coefficients are subjected to trainable zero-phase convolutional filtering and reconstructed into the time domain via inverse RDWT, followed by channel-wise temporal and spatial filtering using 2D convolution layers and convolutional-LSTM-based decoding. An ablation study demonstrates that wavelet-domain filtering serves as an effective denoising strategy, improving prediction performance. Sliding-window predictions were validated using Pearson correlation (>= 0.5), and Dynamic Time Warping (DTW) was subsequently used to estimate ocular response times. DTW-derived metrics revealed significant inter-subject differences across all VOM tasks, supported by Mann-Whitney U tests. Cross-correlation analysis further revealed task-dependent temporal behaviors: pursuit tasks exhibited reactive tracking, whereas saccades showed anticipatory responses. Overall, the results highlight pursuit tasks as particularly informative for distinguishing timing differences and demonstrate the potential of RDWT-based EEG features combined with DTW metrics for multimodal mTBI assessment.

As end-to-end robotic policies are progressively deployed in the real world to solve real tasks, they face a gap between the training and inference conditions. Scaling the amount and diversity of the training data has shown some success in improving zero-shot generalization, yet robots still fail when faced with new, unseen test conditions. For instance, while robots with fixed frames of reference are common, those with moving frames pose a greater challenge for deployment. To address this specific instance of the issue, we present a study of strategies for encoding the robot's proprioceptive state to improve both in- and out-of-distribution performance at test time. Through a systematic study of joint representations, we find that a simple episode-wise relative frame provides the best trade-off between task performance and robustness, outperforming the baselines in extensive real-robot experiments conducted in a realistic test environment. The results suggest a practical path to leveraging data collected by robots with varying frames of reference and deployment to unseen test configurations.

Wheeled-legged robots hold promise for traversing complex terrains and offer superior mobility compared to legged robots. However, wheeled-legged robots must effectively balance both wheeled driving and legged control. Furthermore, due to noisy proprioceptive sensing and real-world motor constraints, realizing robust and adaptive locomotion at peak performance of motors remains challenging. We propose the Multi-skill Unified Joint Integration of Control Architecture (MUJICA), a unified, fully proprioceptive control framework for wheeled-legged robots that integrates diverse low-level skills-including omnidirectional moving, high platform climbing, and fall recovery-within a single policy. All skills, distinguished by unique indicator variables, are trained jointly with accurate DC-motor constraint modeling. Additionally, a high-level skill selector is learned to dynamically choose the optimal skill based solely on proprioceptions, enabling adaptive responses to the surrounding environment. Therefore, MUJICA enhances sim-to-real robustness and enables seamless transitions across diverse locomotion modes, facilitating autonomous adjustment to the environment. We validate our framework in both simulation and real-world experiments on the Unitree Go2-W robot, demonstrating significant improvements in adaptability and task success in unstructured environments.

We compare three state-of-the-art proprioceptive state estimators for quadruped robots: MUSE [1], the Invariant Extended Kalman Filter (IEKF) [2], and the Invariant Smoother (IS) [3], on the CYN-1 sequence of the GrandTour Dataset [4]. Our goal is to give practitioners clear guidance on accuracy and computation time: we report long-term accuracy (Absolute Trajectory Error, ATE), short-term accuracy (translational and rotational Relative Pose Error, RPE), and per-update computation time on a fixed hardware/software stack. On this dataset, RPEs are broadly similar across methods, while IEKF and IS achieve a lower ATE than MUSE. Runtime results highlight the accuracy-latency trade-offs across the three approaches. In the discussion, we outline the evaluation choices used to ensure a fair comparison and analyze factors that influence short-horizon metrics. Overall, this study provides a concise snapshot of accuracy and cost, helping readers choose an estimator that fits their application constraints, with all evaluation code and documentation released open-source at https://github.com/iit-DLSLab/state_estimation_benchmark for full reproducibility.

Robust humanoid stair climbing remains challenging due to geometric discontinuities, sensitivity to step height variations, and perception uncertainty in real-world environments. Existing learning-based locomotion policies often rely on implicit terrain representations or blind proprioceptive feedback, limiting their ability to generalize across varying stair geometries and to anticipate required gait adjustments. This paper proposes an explicit stair geometry conditioning framework for robust humanoid stair climbing. Instead of encoding terrain as high-dimensional latent features, we extract a compact set of interpretable geometric parameters, including step height, step depth, and current yaw angle relative to the robot heading. These explicit stair parameters directly condition a Proximal Policy Optimization (PPO)-based locomotion policy, enabling proactive modulation of swing-foot clearance and stride characteristics according to stair structure. Simulation experiments demonstrate improved generalization across unseen stair heights beyond the training distribution. Real-world experiments on the Unitree G1 humanoid validate reliable indoor and outdoor stair traversal. In challenging outdoor scenarios, the robot successfully ascends 33 consecutive steps without failure, demonstrating robustness and practical deployability.

Humans grasp unfamiliar objects by combining an initial visual estimate with tactile and proprioceptive feedback during interaction. We present ShapeGrasp, a robotic implementation of this approach. The proposed method is an iterative grasp-and-complete pipeline that couples implicit surface visuo-haptic shape completion (creation of full 3D shape from partial information) with physics-based grasp planning. From a single RGB-D view, ShapeGrasp infers a complete shape (point cloud or triangular mesh), generates candidate grasps via rigid-body simulation, and executes the best feasible grasp. Each grasp attempt yields additional geometric constraints -- tactile surface contacts and space occupied by the gripper body -- which are fused to update the object shape. Failures trigger pose re-estimation and regrasping using the refined shape. We evaluate ShapeGrasp in the real world using two different robots and grippers. To the best of our knowledge, this is the first approach that updates shape representations following a real-world grasp. We achieved superior results over baselines for both grippers (grasp success rate of 84% with a three-finger gripper and 91% with a two-finger gripper), while improving the 3D shape reconstruction quality in all evaluation metrics used.

Humanoid robots are entering our physical world at scale, yet as oversized toys--good at singing and dancing, but short on force-interaction capabilities for practical tasks. Bridging this gap necessitates prioritizing reliable contact perception as a fundamental requirement. Estimating external wrenches in humanoids is complicated by floating-base dynamics and indeterminate contact locations. Existing analytical frameworks require idealistic assumptions and hard-to-obtain measurements, which are often unavailable in practice. To bridge this gap, we propose SixthSense, a task-agnostic approach that infers whole-body contact timing, location, and wrenches from proprioception and IMU data alone. To capture the multi-modal dynamics between unstructured contact inputs and the uncertain motion outputs, we employ conditional flow matching to tokenize proprioceptive histories and estimate a spatiotemporally sparse contact-event flow. SixthSense serves as a plug-and-play perception module for applications including collision detection, physical human-robot interaction, and force-feedback teleoperation. Experiments across standing, walking, and whole-body motion-tracking policies showcased unprecedented performance in diverse behaviors.

Indoor localisation techniques suffer from attenuated Global Navigation Satellite System (GNSS) signals and from the accumulation of unbounded drift by integration of proprioceptive sensors. Magnetic field-based Simultaneous Localisation and Mapping (SLAM) reduces drift through loop closures by revisiting previously seen locations, but extended exploration of unseen areas remains challenging. Recently, magnetometer arrays have demonstrated significant benefits over single magnetometers, as they can directly estimate the odometry. However, inconsistencies between magnetometer measurements negatively affect odometry estimates and complicate loop closure detection. We propose two filtering algorithms: The first focuses on magnetic field-based SLAM using a magnetometer array (SLAMma). The second extends this to jointly estimate the magnetometer calibration parameters (SLCAMma). We demonstrate, using Monte Carlo simulations, that the calibration parameters can be accurately estimated when there is sufficient orientation excitation, and that magnetometers achieve inter-sensor measurement consistency regardless of the type of motion. Experimental validation on ten datasets confirms these results, and we demonstrate that in cases where single magnetometer SLAM fails, SLAMma and SLCAMma provide good trajectory estimates with, more than 80% drift reduction compared to integration of proprioceptive sensors.

We propose a multimodal, physically grounded approach for metric-scale amodal object reconstruction and pose estimation under severe hand occlusion. Unlike prior occlusion-aware 3D generation methods that rely only on vision, we leverage physical interaction signals: proprioception provides the posed hand geometry, and multi-contact touch constrains where the object surface must lie, reducing ambiguity in occluded regions. We represent object structure as a pose-aware, camera-aligned signed distance field (SDF) and learn a compact latent space with a Structure-VAE. In this latent space, we train a conditional flow-matching diffusion model, pretraining on vision-only images and finetuning on occluded manipulation scenes while conditioning on visible RGB evidence, occluder/visibility masks, the hand latent representation, and tactile information. Crucially, we incorporate physics-based objectives and differentiable decoder-guidance during finetuning and inference to reduce hand--object interpenetration and to align the reconstructed surface with contact observations. Because our method produces a metric, physically consistent structure estimate, it integrates naturally into existing two-stage reconstruction pipelines, where a downstream module refines geometry and predicts appearance. Experiments in simulation show that adding proprioception and touch substantially improves completion under occlusion and yields physically plausible reconstructions at correct real-world scale compared to vision-only baselines; we further validate transfer by deploying the model on a real humanoid robot with an end-effector different from those used during training.

Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to estimate body pose and velocity, with a unified formulation applicable to quadruped and wheel-legged robots and extensible to other legged morphologies. The key idea is to treat each reliable contact as a kinematic anchor: joint-torque--based foot wrench estimation selects stance contacts, and the corresponding footfall records provide intermittent world-frame constraints that suppress long-term drift. To prevent elevation drift during extended traversal, we introduce a lightweight height clustering and time-decay correction that snaps newly recorded footfall heights to previously observed support planes. For wheel-legged platforms, the recorded contact is further propagated by effective wheel rolling displacement with shank-motion compensation and a slope-aware rolling direction. To improve foot velocity observations under encoder quantization, we retain an inverse-kinematics cubature Kalman filter as an optional velocity-enhancement module that filters foot-end velocities from joint angles and velocities. The implementation further mitigates yaw drift through multi-contact geometric consistency, which is injected as a soft heading prior rather than as a hard reset of the attitude state. The method is evaluated on four quadruped platforms.

Vision-language-action (VLA) models typically inject proprioception only as a late conditioning signal, preventing robot state from grounding instruction understanding or directing visual attention. We introduce ThinkProprio, which discretizes proprioception into VLM-vocabulary tokens and uses them jointly with the instruction to gate visual patches before VLM computation, steering the model toward action-relevant evidence while discarding redundant tokens early. We find that proprioception added as a passive conditioning signal leaves performance essentially unchanged; its value emerges when token-form state acts as an active query that, with the instruction, selects which visual patches the VLM processes. Systematic ablations show that VLM-vocabulary tokens outperform learned projectors as the state encoding, and that retaining only about \SI{12}{\percent} of the visual tokens surpasses on CALVIN ABC$\to$D. Across CALVIN, LIBERO, and real-world manipulation, ThinkProprio reduces end-to-end inference latency while improving the matched full-token baseline.

Reconstructing the three-dimensional (3D) geometry of object surfaces is essential for robot perception, yet vision-based approaches degrade under low illumination or occlusion. This limitation motivates the design of a proprioceptive membrane that conforms to the surface of interest and infers 3D geometry by reconstructing its own deformation. Conventional deformation-aware membranes typically rely on resistive, capacitive, or magneto-sensitive mechanisms, but can suffer from structural complexity, limited compliance during large-scale deformation, and susceptibility to electromagnetic interference. This work presents a soft, flexible, and stretchable proprioceptive silicone membrane based on optical waveguide sensing. The membrane integrates edge-mounted LEDs and centrally-distributed photodiodes (PDs) within a multilayer elastomeric composite. Rich deformation-dependent light-intensity signals are decoded by a data-driven model to recover the membrane geometry. Real-time reconstruction is demonstrated on a customized 140 mm square membrane at an end-to-end update rate of 90 Hz, achieving an average reconstruction error of 1.307 mm for out-of-plane deformation of up to 25 mm. The proposed sensor also demonstrates accurate reconstruction under large in-plane deformation, achieving reliable shape recovery up to 75% strain with an average Chamfer distance of 1.214 mm. The proposed framework provides a scalable, robust, and low-profile solution for global shape perception in deformable robotic systems.

Deployment of legged robots for navigating challenging terrains (e.g., stairs, slopes, and unstructured environments) has gained increasing preference over wheel-based platforms. In such scenarios, accurate odometry estimation is a preliminary requirement for stable locomotion, localization, and mapping. Traditional proprioceptive approaches, which rely on leg kinematics sensor modalities and inertial sensing, suffer from irrepressible vertical drift caused by frequent contact impacts, foot slippage, and vibrations, particularly affected by inaccurate roll and pitch estimation. Existing methods incorporate exteroceptive sensors such as LiDAR or cameras. Further enhancement has been introduced by leveraging gravity vector estimation to add additional observations on roll and pitch, thereby increasing the accuracy of vertical pose estimation. However, these approaches tend to degrade in feature-sparse or repetitive scenes and are prone to errors from double-integrated IMU acceleration. To address these challenges, we propose GaRLILEO, a novel gravity-aligned continuous-time radar-leg-inertial odometry framework. GaRLILEO decouples velocity from the IMU by building a continuous-time ego-velocity spline from SoC radar Doppler and leg kinematics information, enabling seamless sensor fusion which mitigates odometry distortion. In addition, GaRLILEO can reliably capture accurate gravity vectors leveraging a novel soft S2-constrained gravity factor, improving vertical pose accuracy without relying on LiDAR or cameras. Evaluated on a self-collected real-world dataset with diverse indoor-outdoor trajectories, GaRLILEO demonstrates state-of-the-art accuracy, particularly in vertical odometry estimation on stairs and slopes. We open-source both our dataset and algorithm to foster further research in legged robot odometry and SLAM. https://garlileo.github.io/GaRLILEO

In physical human-robot collaboration (pHRC) settings, humans and robots collaborate directly in shared environments. Robots must analyze interactions with objects to ensure safety and facilitate meaningful workflows. One critical aspect is human/object detection, where the contacted object is identified. Past research introduced binary machine learning classifiers to distinguish between soft and hard objects. This study improves upon those results by evaluating three-class human/object detection models, offering more detailed contact analysis. A dataset was collected using the Franka Emika Panda robot manipulator, exploring preprocessing strategies for time-series analysis. Models including LSTM, GRU, and Transformers were trained on these datasets. The best-performing model achieved 91.11% accuracy during real-time testing, demonstrating the feasibility of multi-class detection models. Additionally, a comparison of preprocessing strategies suggests a sliding window approach is optimal for this task.

Robust and accurate proprioceptive state estimation of the main body is crucial for legged robots to execute tasks in extreme environments where exteroceptive sensors, such as LiDARs and cameras, may become unreliable. In this paper, we propose DogLegs, a state estimation system for legged robots that fuses the measurements from a body-mounted inertial measurement unit (Body-IMU), joint encoders, and multiple leg-mounted IMUs (Leg-IMU) using an extended Kalman filter (EKF). The filter system contains the error states of all IMU frames. The Leg-IMUs are used to detect foot contact, thereby providing zero-velocity measurements to update the state of the Leg-IMU frames. Additionally, we compute the relative position constraints between the Body-IMU and Leg-IMUs by the leg kinematics and use them to update the main body state and reduce the error drift of the individual IMU frames. Field experimental results have shown that our proposed DogLegs system achieves better state estimation accuracy compared to the traditional leg odometry method (using only Body-IMU and joint encoders) across various terrains. We make our code and datasets publicly available to benefit the research community (https://github.com/YibinWu/DogLegs).