Proprioception

Humanoid locomotion across complex terrain demands forward-looking exteroception to anticipate obstacles, yet this signal is unreliable in real-world deployment, failing partially and intermittently. Existing perceptive policies often assume that depth observations remain clean and in-distribution, while recent attempts to unify perceptive and blind control typically route or switch between separate sub-policies, leaving recoverable information in partially corrupted depth unexploited. We instead propose CAP, a single-stage humanoid locomotion policy that recovers this signal with a perceptive world-model encoder trained as a learned denoiser to reconstruct clean depth from a corrupted input, together with a co-active proprioceptive variational encoder that supplies depth-free body-state information. A coupled training recipe pairs a depth-noise curriculum on the world-model input with world-model feature dropout on the policy-facing latent, exposing the policy to failures across the entire perception-quality spectrum. In simulation, CAP matches or improves upon perceptive baselines when depth remains informative, and degrades more smoothly than a binary-switching baseline as perception worsens. On the Unitree G1, controlled trials and indoor-outdoor deployments demonstrate perception-robust locomotion under intermittent occlusion, real-sensor corruption, and outdoor depth artifacts.

Contact-rich assembly remains challenging because it requires submillimeter spatial accuracy and reliable interpretation of forces during sustained contact. Although simulation-based reinforcement learning offers a scalable training paradigm, discrepancies in visual observations, contact dynamics, and force/torque (F/T) measurements often limit policy transfer. We observe that proprioception is comparatively consistent across domains because joint positions are expressed in a shared calibrated coordinate system and joint velocities are computed consistently in simulation and on hardware. Based on this observation, we present PACE (Proprioception-Anchored Cross-Modal Encoder), which supervises temporal visual and F/T representations by predicting proprioceptive state transitions. Static domain-specific factors, including lighting, texture, and sensor bias, contain little information about joint motion; the proposed objective therefore encourages the encoder to suppress these factors while retaining task-relevant motion cues. Policies trained on frozen PACE features are deployed on hardware without real-world fine-tuning or object-pose tracking. Across four contact-rich assembly tasks, PACE attains an average real-world success rate of 93.3% and only a 2.7-percentage-point sim-to-real drop, while remaining robust to perturbations that substantially degrade pose-based and learned-fusion baselines.

Quadruped robots have demonstrated impressive agility in parkour locomotion across complex terrains. However, most systems still rely on human intervention for high-level planning, and autonomous parkour navigation remains underexplored. The key challenges include fine-grained velocity regulation, long-horizon anticipatory behaviors, and tight coupling between perception and embodied execution. To address these challenges, we propose a Multimodal Diffusion Policy (MulDP) that integrates visual perception with robot proprioception and goal information to generate temporally coherent and anticipatory navigation velocity commands, tightly coupling perception with embodied control to enable robust autonomous navigation. To support the training of MulDP, we construct the first Quadruped Parkour Navigation Dataset (QPND), a multimodal dataset that encompasses diverse navigation behaviors and complex terrains. Extensive simulation and real-world experiments demonstrate that MulDP enables robust long-horizon autonomous navigation and effective traversal across complex terrains.

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

In animals such as elephants and octopuses, acquiring non-visual information about an object and physically engaging with it are inseparable processes mediated by rich, large-area interactions between compliant appendages and the environment. Soft robots provide a natural platform for translating this principle into engineered systems. Yet current robotic intelligence makes limited use of physical interaction, treating it primarily as a disturbance to be rejected or, at best, as a means of compensating for object misalignment. Here, we introduce a physical intelligence framework in which distributed compliant interactions jointly reveal task-relevant information and organize manipulation behavior. This results in an intrinsically partially observable problem: key task-relevant information is never measured directly, but must instead be inferred from the history of physical interactions. We propose a reinforcement-learning architecture that addresses this challenge by learning a memory-based control policy end-to-end. The key innovations making this possible are (i) a pretrained exploration policy that provides a reference for broad workspace exploration, (ii) joint optimization that integrates exploration and grasping objectives within a single recurrent policy, and (iii) a two-stage sim-to-real adaptation including observation mapping and policy fine-tuning. We demonstrate this principle through blind whole-arm grasping with a hybrid rigid-soft robotic arm that we equip with IMUs embedded directly within its compliant structure, providing its only source of proprioceptive sensing. The learned policy successfully identifies and grasps various objects by autonomously coordinating workspace exploration, object encounter and localization, inference of grasp-relevant properties, and stable whole-arm wrapping.

Humans traverse complex terrain over long distances without losing balance, whereas perceptive humanoid policies become fragile as perception and control errors accumulate. We present SOLO, a unified framework addressing two compounding causes of this long-horizon fragility: dense terrain reconstruction smooths action-critical details, and pointwise imitation lacks temporal credit assignment. Its Query Reconstructor (QR) uses Fourier-encoded cell queries to retrieve spatially specific evidence from depth-proprioception tokens, preserving sharp terrain boundaries. Trajectory-Aware MSE (TA-MSE) Distillation adds next-state teacher-student disagreement to the PPO reward, enabling Generalized Advantage Estimation to propagate future disagreement penalties to preceding actions. In simulation, QR reduces height-map L1 error by factors of 3.3-4.0, while TA-MSE surpasses PPO and MSE+PPO in curriculum progression. On stress-test terrains, SOLO achieves 97.5% mean traversal success and 96% stepping-stone success, versus 75.0-75.6% and 0-3% for dense-reconstructor variants. Deployed zero-shot with only a chest-mounted depth camera and proprioception, SOLO completes a continuous 1.5-km outdoor route and an indoor mixed-terrain course. Project page: https://sunpihai-up.github.io/solo/

In this paper, we present TRACE (Tokenized Robust Attention for Contact-Aware Estimation), an end-to-end learned proprioceptive odometry estimator for legged robots under unreliable contact conditions. The proposed estimator directly predicts relative displacement, relative rotation, and body-frame velocity from a recent history of onboard inertial and joint measurements. To improve robustness under unreliable contact conditions, we introduce a foot-aware cross-attention module that adaptively weights IMU and leg-wise kinematic tokens without relying on manually defined contact or slip thresholds. The estimator is trained with direct supervision and two physics-inspired auxiliary losses that promote kinematic consistency and reliable use of leg information. To reduce policy-specific overfitting and consequently improve sim-to-real transfer, simulation training incorporates policy randomization, followed by partial real-world fine-tuning of the temporal encoder and prediction head. Experiments across diverse indoor and outdoor terrains demonstrate consistent reductions in position drift compared with classical filtering-based, hybrid, and purely learning-based baselines. Ablation studies further validate the contributions of the proposed training objectives, policy randomization, and real-world fine-tuning, particularly under unreliable contacts and sim-to-real mismatch.

Nonvisual classification of ground condition based on a multimodal sensing approach was investigated for an amoeba-inspired autonomous walking robot. To classify ground condition without image sensing and processing, we implemented artificial proprioception by integrating a three-axis accelerometer, eight foot pressure sensors, and reservoir computing (RC). Even when large fluctuations in the sensor outputs are caused by dynamic motions of a four-legged robot in walking, our system can classify the ground condition, flat or rough, with high accuracy. We demonstrate on-site switching of walking gait depending on ground condition in the robot. We also discuss the contribution of each sensor to ground condition classification.

Transcutaneous spinal cord stimulation (tSCS) modulates spinal sensorimotor circuits primarily through activation of afferent networks. While prior work has emphasized locomotor performance and spinal excitability, how tSCS affects conscious proprioceptive perception and the extent to which such effects parallel changes in locomotor control remain unclear. We investigated the acute and training-related effects of tSCS on ankle proprioception and gait in unimpaired adults (n = 14), with an independent control group (n = 14) completing identical proprioceptive training without stimulation. Proprioception was quantified using a bilateral robotic assessment of dynamic ankle localization ability (Crisscross), gross motor output using maximum dorsiflexion strength, and gait during normal and tandem treadmill walking using spatiotemporal, trunk-sway, and mediolateral center-of-mass (CoM) excursion measures. Acute tSCS increased ankle proprioceptive error (p < 0.001) while dorsiflexion strength was unchanged (p = 0.30). Gait shifted toward a modestly more constrained locomotor pattern, characterized by reduced step width and ML CoM excursion (p < 0.05). With continued training under stimulation, proprioceptive error decreased and, unlike the control group, the tSCS group showed progressive improvement that persisted after stimulation ended. Sagittal-plane gait measures recovered toward or beyond baseline, whereas mediolateral measures remained constrained, revealing a direction-dependent reorganization of locomotor control. Together, these findings show that tSCS influences multiple aspects of the sensorimotor control loop, disrupting conscious proprioception while reshaping locomotor behavior, and that the nervous system can adapt to altered afferent input through training.

Continuum robots often operate in uncertain environments, where accurate state estimation is essential for safe interactions. Estimate uncertainty is inherently spatially non-uniform: confidence varies depending on where measurements are available. Global estimation accuracy is not always the top priority, but rather achieving sufficient confidence at task-relevant locations along the robot. This extended abstract introduces mechanically reconfigurable sensing enabling uncertainty-shaping in state estimation for continuum robots. We present a concept hardware design demonstrating the feasibility of longitudinal translation of a sensor within a continuum robot. We demonstrate that state estimation confidence can be reconfigured by varying the sensor location, and show a reduction of full-body shape estimation errors when sliding the sensor back and forth over time, compared to a single fixed tip sensor.

Recent Vision-Language-Action (VLA) models almost universally take robot proprioceptive state as input, yet wire it in incompatible ways -- serialized into text prompts, projected into the vision-language prefix, or fed directly to the action expert -- and almost always as a single current frame. Three questions remain open: (1) whether, and on which tasks, current state actually improves closed-loop control; (2) how much state history helps, and whether its benefit reflects genuine temporal variation rather than added conditioning capacity; and (3) where state should enter the model -- the vision-language backbone or the action-generation module. We answer these questions through controlled experiments on a flow-matching VLA, fixing the backbone, training data, action representation, and evaluation protocol throughout. We implement five representative interfaces -- discrete state prompt, VLM prefix, action prefix, state expert, and feature modulation -- under matched implementation details, and evaluate them on 45 atomic tasks spanning three task families plus 20 composite tasks; we then sweep the state-history length from 1 to 96 frames to examine how historical state information affects model performance. The experiments yield systematic answers to all three questions, distilled into testable design principles for state-aware VLAs.

State estimation is a key component in model-based control of walking robots and, more broadly, applicable wherever hidden variables must be inferred. The Kalman filter is widely used to estimate floating-base position and velocity by fusing multiple sensing modalities. However, tuning noise parameters is challenging and typically requires expert knowledge. Moreover, fixed noise parameters are unsuitable for varying gaits and environments. We propose an online adaptation strategy for the process noise covariance matrix Q and the measurement noise covariance matrix R. Specifically, we introduce a filter residual and innovation-based covariance adaptation method for legged robot state estimation and evaluate it against a baseline approach relying on IMU and foot force measurements. The proposed adaptation is implemented within an Invariant Extended Kalman Filter (InEKF) fusing IMU and leg kinematics. Experiments on indoor and outdoor datasets with a Unitree Go2 quadruped show that adapting R is sufficient and improves accuracy by 25% for the trotting gait compared to the fixed-tuned InEKF. Finally, the proposed residual-based adaptation achieves comparable performance to the foot force approach, without requiring foot force measurements or additional parameter tuning.

Kinematic models provide reliable motion constraints for odometry estimation in featureless environments, where exteroceptive sensing degrades and IMU integration drifts. Learning-based kinematic models can achieve more accurate odometry estimation than model-based methods by capturing nonlinear effects; however, most existing learning-based models are trained on a single embodiment and generalize poorly to new embodiments. This generalization is difficult because the meanings and structures of proprioceptive measurements vary across embodiments, including the number of joints and ground-contact elements (e.g., wheels, feet). To address this challenge, we propose KING, a Graph Neural Network (GNN)-based kinematic model that explicitly incorporates robot embodiments by representing them as a common graph. We show that wheel and leg kinematic models can be expressed by a unified representation, enabling a single model for both wheeled and legged robots. Trained on datasets spanning diverse embodiments, KING provides a unified representation of wheeled and legged kinematics and achieves high-accuracy odometry estimation in real environments. KING estimates accurate odometry using only an embodiment description (e.g., a URDF file) and on-board proprioception (encoders and an IMU) and can be adapted to new robot embodiments through few-shot learning with only one minute of data, avoiding retraining from scratch on a new dataset for each robot. The project page is available at: https://smrg-aist.github.io/king_project_page/

Vision-language-action (VLA) models predict sequential actions to execute tasks specified by language instructions, conditioned on visual observations and proprioceptive states. However, how to fuse modalities in VLA models remains an open problem, since robot manipulation involves dynamic phases, such as long-distance movements and close-range interactions, in which the importance of visual observations may vary over time. In this paper, we propose an infer-diagnose-refine (IDR) framework, a model-agnostic framework that can be integrated with diverse VLA architectures for refining action predictions at test time. IDR first infers actions under factual and counterfactual scenarios of visual observations, and then diagnoses the causal effects of visual observations as the estimated dynamic importance, which is finally used to refine the action predictions in a training-free manner. We further design a causality-aware action refiner to realize the IDR framework, including zero-padding interventions for inferring counterfactual actions, norm-based quantification for diagnosing causal effects, and gated residual fusion for refining actions. Extensive experiments on both simulation benchmarks and real-world tasks show improvements in overall performance across multiple VLA backbones, demonstrating the efficacy of dynamically adjusting visual importance at test time.

Reinforcement learning can produce robust humanoid controllers, but each new task is typically trained as a separate policy with its own reward design and training process. Motion imitation provides an alternative source of motor competence by training policies to track retargeted human motions, yet the resulting controllers remain reference trackers and are not directly usable as task policies. We propose a three-stage pipeline that turns motion-imitation skills into a reusable hybrid motion prior (HMP) for humanoid locomotion. First, an expert policy is trained to imitate retargeted human motion-capture clips. Second, the expert is distilled into a frozen architecture composed of a proprioceptive encoder, a residual vector-quantized (RVQ) codebook, and an action decoder. Third, task-level policies are trained to solve locomotion tasks by selecting discrete codebook entries while the HMP remains frozen. We evaluate the method on velocity tracking, point-goal navigation, and fall-recovery velocity tracking in simulation, and deploy the velocity-tracking policy on a real Unitree G1 robot. The distillation process preserves the tracking behavior of the expert, while the resulting HMP can be reused without retraining as the action interface for different downstream locomotion policies. The learned HMP reveals an interpretable codebook structure in which the number of active RVQ stages modulates the available gait patterns. We further show that training the codebook with the rotation trick improves latent organization and reduces downstream falls compared with a standard straight-through estimator.

Real-time deployment of Vision-Language-Action (VLA) policies necessitates asynchronous execution, wherein subsequent action chunks are computed concurrently with the execution of the current chunk, leading to prediction-execution misalignment and manifesting as inter-chunk discontinuities. Existing methods either superficially smooth chunk boundaries, require costly policy optimization, or exclusively forward-predict proprioceptive states yet neglect critical visual observations. In this paper, we propose \textbf{FutureRTC}, a plug-and-play adaptation framework that predicts execution-time observations and states for asynchronous VLA control without modifying the underlying policy. Specifically, FutureRTC features a state correction module to compensate for the discrepancy between rolled-forward and actual execution-time proprioceptive states and an observation prediction module that forecasts execution-time visual representations by leveraging robot motion as an explicit physical prior through motion-aware feature transport and reconstruction. Furthermore, we introduce a policy consistency loss to align the action chunks generated from predicted contexts with those produced under the expected execution-time inputs of the VLA policy. Extensive experiments across simulated and real-world environments demonstrate that FutureRTC achieves superior robustness to inference delays, resulting in smoother trajectories, faster execution, and consistently higher task success rates.

Latent world models improve sample efficiency in continuous control by optimizing policies over imagined latent trajectories, but common neural transitions offer limited direct control over modal persistence and error accumulation in long rollouts. We propose Koopman Dreamer, a Dreamer-style world model with a spectrally constrained deterministic latent dynamics core. Its Koopman-inspired backbone uses two-dimensional rotation--scaling blocks with bounded radii to represent damping, rotation, and near-periodic modes. Linear and low-rank bilinear action terms capture global and state-dependent control effects, while stochastic-state modulation supplies local correction information. To reduce the mismatch between posterior-conditioned training and prior-only imagination, the model combines posterior-conditioned EMA teacher targets with one-step consistency, multi-step rollout, and open-loop observation-prediction objectives. We further derive a multi-step rollout-error bound that separates amplification by the spectral backbone and bilinear interaction from the additive effects of stochastic-state mismatch and modeling residuals, clarifying the trade-off between error attenuation and long-term information retention. Experimental results on proprioceptive continuous-control tasks from the DeepMind Control Suite and UAV-LiDAR autonomous navigation demonstrate that Koopman Dreamer improves the stability of long-horizon latent rollouts and achieves stronger closed-loop control performance on tasks that rely on high-quality multi-step imagination.

Precise metric depth estimation is fundamental for autonomous robot navigation, yet monocular systems inherently suffer from scale ambiguity and scale drift. While recent recurrent flow-based SLAM systems have demonstrated state-of-the-art robustness, they remain scale-ambiguous. In this paper, we propose Metric-DROID, an end-to-end recurrent architecture that anchors visual SLAM to physical reality by integrating proprioceptive odometry. Our framework introduces the following innovations: (1) A LSTM Update Operator that encodes high-frequency odometry sequences into spatial feature maps, providing a persistent metric bias for iterative refinement. (2) An Uncertainty-Aware Metric Backend ($BA_{odom}$) that treats odometry as a geometric anchor with learned heteroscedastic covariance. By regressing a time-varying metric uncertainty $Σ_{o}$, our system intelligently balances visual re-projection and metric translation residuals, effectively mitigating the impact of wheel-slip and sensor noise. (3) We further propose a selective residual fine-tuning strategy to preserve pre-trained geometric priors while enabling zero-shot metric alignment.

Ultra-Wideband (UWB) ranging has become a viable option for industrial Autonomous Mobile Robot (AMR) localization due to improved accuracy and low cost. However, real-world deployments remain limited by two recurring challenges: calibrating static anchors can be time-consuming and error-prone, and integrating UWB with existing onboard sensors requires careful design to ensure robust and consistent pose estimation. Addressing these challenges, this paper presents an end-to-end pipeline that combines automatic anchor calibration with a generic multi-sensor estimator tailored to surface-bound vehicle motion. It targets existing AMR stacks in scenarios where robot pose priors are available for initialization. The calibration stage estimates anchor positions and range biases, while the localization stage fuses UWB with proprioceptive sensing in a bias-aware Extended Kalman Filter to improve consistency without extensive parameter tuning. Experiments on a commercial logistics AMR in a warehouse setting demonstrate accurate positioning indoors and across outdoor transitions, with improved consistency compared to an earlier estimator formulation. Evaluation on an independent forklift dataset further indicates transferability to other platforms. The method remains effective in test cases with limited line-of-sight and sparse anchor coverage. These results show that UWB localization can be deployed with substantially reduced manual effort while preserving the accuracy required for industrial AMRs. The collected warehouse dataset is made publicly available.

Robotic systems increasingly demand tactile sensing that approaches the adaptability and resolution of human skin to enable dexterous manipulation and safe interaction. OptiTac is a biomimetic tactile sensor that emulates the mechanoreceptor-to-nerve architecture of human touch by pairing each mechanical pin on a soft skin with an optical fiber acting as an artificial nerve. This design demonstrates an architectural principle for routing tactile information away from the sensing surface while preserving high spatial resolution, establishing a practical route toward distributed tactile sensing in future robotic systems. By treating tactile signals as images, simple analytical methods, rather than opaque deep-learning models, are used to infer contact location, size, and shape, providing interpretable and scalable tactile intelligence. This work demonstrates how evolutionary principles from biology can guide the development of artificial nerve systems for robots, offering a pathway toward human-like tactile perception in next-generation robotic platforms. More broadly, OptiTac establishes an artificial nerve-inspired sensing framework for interpretable robotic touch and a scalable route toward future distributed tactile systems.

This paper presents a scalable, open-source visuotactile sensing system for tensegrity robots that enables six-axis wrench estimation and contact detection. The proposed endcap sensor integrates an elastomeric shell, a 3D-printed thermoplastic polyurethane (TPU) interface, and a rigid base housing an embedded camera and LED illumination ring. A novel gyroid-infill bonding technique is introduced to form a durable elastomer-TPU interface without adhesives, yielding a lightweight and modular design compatible with large-scale tensegrity structures. A tactile-to-wrench neural network maps shear vector fields to six-dimensional force and torque measurements. Experimental results demonstrate accurate and stable wrench estimation with a mean squared error (MSE) of 0.1531 on static validation data and out-of-domain generalization under dynamic motion. Furthermore, full-system integration on a 12 kg tensegrity robot confirms the sensor's ability to reliably identify ground contacts. The system substantially improves the practicality of tactile feedback for tensegrity robots, offering a low-cost, reproducible, and physically interpretable pathway toward contact-aware proprioception and state estimation. Open source files are available at \href{https://github.com/Jonathan-Twz/tensegrity-gelfoot}{github.com/Jonathan-Twz/tensegrity-gelfoot}

Soft continuum robots require embedded sensing for proprioception and contact detection, yet integrating sensors into sparse, highly deformable architected structures remains challenging. We present a model-based strategy that decouples proprioceptive and contact signals from a common set of fluidic pressure sensors embedded in a soft architected segment. Each segment of the Innervated Trimmed Helicoid (ITH) contains six air channels routed in a localized zigzag pattern along the circumference. With only three principal kinematic degrees of freedom (axial compression, bending in x, bending in y), the six pressure readings form an overdetermined system. A piecewise constant curvature model maps pressures to shape, and Huber regression identifies outlier channels whose residuals indicate external contact. On a single ITH segment, this approach achieves proprioceptive shape estimation with a relative bending error of 0.11 +/- 0.02 and a contact detection rate of 97% across 178 trials. We integrate eight ITH segments into Air-Helix, a tendon-driven soft continuum manipulator, and present exploratory whole-arm demonstrations that include tactile teaching by demonstration, admittance-controlled force regulation, and tactile object reconstruction. The results suggest that localized fluidic innervation combined with model-based redundancy resolution is a practical path toward concurrent proprioception and contact sensing in architected soft robots.

A robot must understand the state of its own body, but a camera sees only part of it. Force and contact leave almost no trace in a single frame, and raw vision features read force at $R^2$ at or below $0.10$ on every robot we test. We present Kepler-Encoder-v0.1, a robot-first multimodal encoder that treats robot state as a modality and fuses vision, proprioception, and force/torque into a single shared latent with a learned-query cross-attention layer, trained self-supervised by masked cross-modal prediction under the LeJEPA/SIGReg objective. At evaluation only vision enters, which poses a sharp question. Does fusing state into training make the vision-only latent carry anything the pixels do not already contain? On the RH20T corpus the answer is yes, precisely where the camera is weakest. On held-out scenes, the vision-only latent recovers end-effector state, and force in particular, significantly above both raw frozen-ViT features and a compute-matched vision-only control on every sensored robot, though absolute force recovery at a single timestep is modest; on motor state, which the camera largely sees, it is statistically tied with the strongest vision baselines, and it is the only feature whose latent geometry tracks state. A single embodiment-agnostic encoder covers four robots, and a data-matched control shows this breadth reflects embodiment diversity rather than data volume. The frozen latent is directly useful. Its own cross-modal prediction error is a training-free invalid-state monitor (AUROC $0.90$ on out-of-range states, $0.69$ on scene-swapped states), and a diffusion decoder (PixNerd) reconstructs the camera frame from the latent, confirming the spatial compression preserves world-state. This report validates the single-timestep case; native-rate temporal fusion is the next step.

Compute-constrained quadrupeds often run their navigation loop far below the controller's design rate: sharing the onboard Jetson Orin with the vision pipeline slows our stair loop to about 15 Hz. This latency breaks a standard proprioceptive pattern: declaring stair-summit arrival from the body-pitch signal while still climbing. On a stepped platform whose 50 cm top is shorter than the robot (Unitree Go2, about 75 cm), in-motion detection overshoots the top edge with probability rising with the per-period advance v/f (the slowest about 15 Hz cell partly diluted by a separate non-arrival mode), whereas a climb-settle cadence holds overshoot near zero at every loop rate (pooled 22/45 vs 1/45 over about 30/20/15 Hz; Fisher p about 2.4e-7; 7/15 vs 0/15 at the deployed about 15 Hz). A logistic dose-response model in v/f captures the failure; a pre-specified 40 Hz out-of-sample test favours the protocol-clean fit (33% observed vs 43%/22% predicted), giving a deployment rule (critical loop rate about 19 Hz at 0.30 m/s). The detector sits in a fully onboard, mapping-free and learning-free stack: built-in inertial measurement unit, four foot-force channels, three 1-D ranges, one line camera, chaining line-following, a three-segment maneuver for 90-degree corners in a 55 cm corridor (20/20 contact-free vs 14/20 with 12 wall contacts for in-place yaw; exit-heading error 1.56 degrees vs 5.64 degrees), and stair traversal, completing the inspection course in 18/20 trials (90%). Results are from a single course geometry, platform, and operator.

Proprioception is fundamental to robotic manipulation, yet standard fusion methods often treat it as an isolated vector lacking explicit alignment with visual tokens. Without a direct correspondence between 3D kinematics and 2D feature maps, manipulation policies struggle to ground the robot's state within the scene, frequently underperforming even vision-only baselines. To address this, we introduce GeoProp, a lightweight, plug-and-play adapter that aligns proprioception with vision through explicit geometric grounding and spatial feature sampling. GeoProp projects the robot state onto the image plane to sample localized visual features, constructing a grounded state token. It then injects state-derived spatial priors into the corresponding visual features via FiLM modulation. To capture motion intent, GeoProp further samples features at a short-horizon predicted coordinate derived from recent kinematics, providing look-ahead visual context. Across 67 tasks, GeoProp improves Diffusion Policy by 8.7% on 63 simulation tasks and pi_0 by 4.0% on the RoboTwin subset, and yields a 10.6% average gain across both policy families in the real world, while adding only 2-3% to the parameter count. These results demonstrate that GeoProp is a simple yet high-impact inductive bias for generalist embodied policies. Project page: https://alibaba-damo-academy.github.io/GeoProp/.

Accurate and robust localization is essential for autonomous mobility systems in real-world environments. While fusing Inertial Measurement Unit (IMU) data with satellite-based correction signals provides precise vehicle pose estimates, performance degrades substantially during outages. Recent studies indicate that Machine Learning (ML) can improve IMU-based proprioceptive localization, highlighting untapped potential for onboard sensors readily available in production vehicles. This paper introduces Physics-Regularized Machine Learning for Localization (PRML2), a hybrid framework that combines the complementary strengths of Kalman filtering and data-driven learning to estimate vehicle pose directly from onboard sensors. A key aspect of PRML2 is its physics-regularized learning, enabled by end-to-end training of an ML model through a differentiable Kalman filter. This improves consistency with vehicle motion models, thereby enhancing both localization accuracy and generalization across driving conditions. We evaluate the performance limits of ML-enhanced onboard odometry on a publicly available dataset and show that PRML2 achieves superior localization accuracy and demonstrates real-time capability. This work also introduces a novel dataset to support vehicle localization research under low-friction conditions. The proposed framework provides a robust and cost-effective solution for vehicle localization under degraded sensing conditions by integrating learning with physics-based priors.

Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.

Although vision-language-action (VLA) models have received widespread attention, many challenges remain in manipulating dynamic moving objects. In most existing approaches, end-to-end forward or inverse dynamics models, i.e., world models, are incorporated into high-performance base VLA architectures, which may degrade the performance of well-pretrained base VLA models due to inappropriate fine-tuning. In this paper, we propose DynaWM, a base-VLA-guided world foundation model that adapts to a wide variety of fine-tuned and coarse-tuned base-VLA checkpoints for moving-object manipulation. DynaWM uses a Mamba-3-based action encoder to encode the base action chunk produced by the base VLA into an action-conditioning representation, a V-JEPA 2.1 vision encoder to extract features from multi-view observation history, and a proprioceptive state encoder to encode robotic-arm proprioceptive states. These feature representations jointly condition a flow-matching DiT to regenerate motion-aware action trajectories for moving-object manipulation. For systematic evaluation, we construct the DynaGrasp-32 benchmark, covering six categories of moving-object manipulation tasks, including velocity variation, trajectory variation, and multi-object manipulation, as well as the DynaGrasp-1600 dataset, which consists of 32 scenarios, 1,600 demonstration trajectories, and approximately 1.53M images. For fine-tuned base-VLA checkpoints, DynaWM achieves percentage improvements of 7.19, 45.31, 1.88, and 10.94 over SmolVLA, X-VLA, π0, and π0.5, respectively. For coarse-tuned base-VLA checkpoints, performance increases by 35.13, 44.06, 35.69, and 26.13 percentage, respectively. Ablation experiments show that visual encoding enhances success by 27.50%, while reducing success by 45.44% if action conditioning is removed.

Learning-based control has revolutionized dynamic locomotion, yet navigating unstructured terrain remains limited by a robot's incomplete awareness of imminent ground contact. While global perception systems such as LiDARs and depth cameras provide environmental context, they are frequently plagued by latencies, occlusions, and the high computational cost of dense geometric reconstruction. On the other hand, proprioceptive feedback is purely reactive, initiating corrections only after impact has occurred. This work explores embedding a minimal suite of low-cost, high-frequency infrared proximity sensors directly into the feet of a quadrupedal robot. These sensors provide "pre-contact" feedback that is robust to self-occlusions and significantly less computationally demanding than conventional vision-based pipelines. By integrating these localized signals into a reinforcement learning framework, we enable the robot to anticipate terrain discontinuities such as gaps and stepping stones that are problematic for traditional perception stacks due to occlusions or state estimation drift. We demonstrate that such sparse, near-field sensing can be reliably modeled in simulation and transferred to the real world with high fidelity. Experimental results show that local proximity sensing substantially improves traversal robustness over discrete terrain and offers a low-power, low-latency alternative or complement to complex global perception suites in unpredictable environments. For more information about results and methods, please see the project website: https://sites.google.com/view/foot-tof/home.

This paper investigates whether magnetic plantar sensing can be embedded directly inside the load-bearing compliant element of a low-cost semi-active prosthetic foot. We present a prototype integrating a sensorised 3D-printed lattice footplate, a servo-adjustable hydraulic damper, and a reduced-order ankle model. The damper is experimentally characterised to relate adjustment angle to damping coefficient. Controlled compression tests show tunable lattice stiffness, while cyclic normal loading shows that the embedded sensor tracks the testing-machine reference force, supporting plantar-force estimation without an external insole layer. Static-posture trials under approximately body-weight loading show that forefoot and rearfoot loading distributions are separable across four prescribed stance configurations, providing a preliminary check of the sensing pipeline. A feedforward damping schedule approximates the dorsiflexion trend of a reference ankle trajectory through early-to-mid stance, while exposing the expected limitation that a purely dissipative mechanism cannot generate active push-off. Together, these results demonstrate that sensing can be embedded inside the load-bearing compliant element of a prosthetic foot and used to drive semi-active damping.

Perceiving physical contact is fundamental to dexterous manipulation. While robots often rely on dedicated hardware tactile sensors, humans exhibit a remarkable ability to infer contact by integrating visual information with an innate sense of their body's pose and movement. Inspired by this embodied perceptual skill, we investigate whether a robot can learn to infer contact from vision, an approach that also offers a scalable alternative to tactile hardware specifically for binary contact estimation, which faces practical challenges in cost, fragility, and integration. We present NoContactNoWorries, a transformer-based multimodal framework that fuses RGB-D vision with the robot's proprioception to infer binary contact states as a pseudo-tactile signal for hand-object interactions. We validate by training a single contact prediction model on multiple objects and show that the inferred contact signal supports downstream reinforcement learning agents for in-hand object reorientation, generalizing to novel objects. Experiments in both simulation and on a real-world robot validate our approach, highlighting the feasibility of inferring contact from vision and proprioception. Project Page: https://soham2560.github.io/no-contact-no-worries/

Compliant joints can embed safety and adaptability into dexterous hands, but achieving large-stroke anthropomorphic motion while maintaining joint-specific, directiondependent stiffness and reliable proprioception remains challenging. This paper presents the PDS joint, a parametric doublespiral (PDS) compliant joint that enables systematic shaping of directional stiffness across multiple deformation modes, including flexion/extension, abduction/adduction, and pronation/supination. We instantiate the joint using Archimedean and logarithmic spiral templates for different hand joints and introduce an asymmetry ratio to tailor stiffness distributions for both grasp stability and hyperextension resistance. To make the joint practically usable under large deformation, we co-design embedded inductive proprioception and propose a learningbased calibration pipeline that maps raw inductive signals to joint states using ArUco-marker tracking. Experiments characterize the stiffness landscapes across geometric parameters and demonstrate a non-monotonic dependence of lateral support on asymmetry, indicating the importance of principled parameter tuning. For joint-state estimation in the most challenging abduction/adduction motion, a learned multilayer-perceptron (MLP) mapping reduces the error compared with conventional curve fitting by 41.6%. Finally, we integrate the proposed joints into an open-source dexterous hand as a demonstration platform, on which the hand grasps a set of nine everyday objects and performs safe, contact-rich human-involved interactions.

Tactile sensing enables robots to perceive rich contact information at the grasp, supporting tasks such as object recognition, in-hand pose estimation, and slip detection. However, in many tool-mediated manipulation tasks, the interaction that determines task success occurs at the tool tip, away from the tactile sensor, making direct sensing of tool-environment contact difficult, particularly when the contact moves during interaction. In this work, we reconstruct the trajectory of extrinsic tool-tip contact using tactile sensing and robot proprioception. We formulate tool-tip trajectory reconstruction as a geometric inference problem under a single-point contact assumption. Our method first estimates the global tool-tip contact location from a calibration segment designed to approximate fixed-point behavior, and then reconstructs the full trajectory by composing relative tool motion estimated from tactile marker observations under continuous contact. Across n=51 trials with multiple trajectories, tools, wrist poses, and grasp configurations, the proposed pipeline achieves a trajectory RMSE of 8.59 +/- 2.41 mm in the world frame and a shape RMSE of 5.96 +/- 1.16 mm, while operating online at 14.00 +/- 4.11 Hz. Overall, the results show that extrinsic tool-tip trajectory geometry can be recovered consistently from grasp-level tactile sensing, with trajectory shape remaining stable across variations in tools, wrist poses, and grasp configurations.

Robust locomotion and navigation for legged robots relies heavily on dependable odometry. Traditional multi-sensor fusion for such state estimation requires meticulous sensor calibration and platform-specific kinematic modeling, which complicates deployment. Industrially packaged exteroceptive sensors can provide accurate motion tracking but remain vulnerable to perceptually degraded conditions. We thus develop a plug-and-play, robust legged odometry system that eliminates the need for explicit exteroceptive-to-proprioceptive calibration or system kinematic modeling. Our approach leverages established exteroceptive motion pipelines as a continuous supervisory signal to train an online learned velocity neural network directly from proprioceptive data. An Invariant EKF (InEKF) is then used to fuse the learned proprioceptive or exteroceptive velocity (if any) and IMU data. When exteroception fails due to environmental degradation, the system seamlessly falls back to using the learned proprioceptive model, yielding a resilient legged odometry that readily adapts to new hardware. We demonstrate the platform-agnostic, easily deployable nature of our approach on different quadruped platforms, showcasing promising results in maintaining robust motion estimation across challenging scenarios.

Legged-wheeled robots have long been studied for their potential to combine the efficient flat-ground mobility of wheels with the rough-terrain capability of legs. However, examples of their application to long-range autonomous navigation in real environments remain limited. This paper reports our effort to build a deep reinforcement learning (DRL) based locomotion controller and an autonomous navigation system for the commercially available legged-wheeled robot Go2-W, and to apply them to long-range autonomous navigation in a real environment. For locomotion control, we extended a proprioception-only policy, which we had previously developed for quadruped robots, to the 16-DoF legged-wheeled robot. We also found that wheeled locomotion concentrates the load on the hip joints and causes heat concentration that hinders sustained travel, and obtained a policy that suppresses it by distributing the load. We evaluated the system at the Tsukuba Challenge 2025, demonstrating that it can autonomously traverse an approximately 2.8 km route including sidewalks, a park, and stairs without stopping due to overheating.

Human hand grasp adaptation depends mainly on the synergy between physical structure and biological feedback. Inspired by this biomechanical principle, the Safe Thumb-Index Robotic (STIR) Hand was developed as a minimal, lightweight, and low-cost two-digit prototype featuring an asymmetric thumb-index configuration. By pairing an underactuated, tendon-driven mechanical design with flexible strain gauges embedded into silicone-encapsulated soft joints, the system achieves passive grasp adaptation while establishing both internal proprioception and external perception. Unsupervised analysis was carried out on a dataset of the STIR hand grasping 20 different objects, along with an object classification task and an ablation study to highlight the contribution of the soft joint sensors. The object classification task discriminated object size, shape, and material stiffness with a high classification accuracy. In contrast to traditional industrial grippers and robotic hands, the STIR Hand demonstrates that sensorized compliant joints significantly improve overall sensitivity and ensure safe grasping, while remaining independent of additional fingertip tactile elements or external vision systems. Finally, a comparison to similar devices grasping identical objects validates the utility of the STIR Hand.

Legged robots are increasingly deployed in forests for ecological surveying and monitoring, yet their autonomy is often interrupted consequent to the challenges posed in traversing forest environments. Forest entrapments, for example, when a robot's legs are ensnared in vines or other vegetation, result in loss of stability and toppling. Such events not only disrupt the mission and require manual intervention, but also risk damage to the robot hardware. To address the absence of a dedicated dataset to investigate these failure modes in forest environments, we present ForEnt, a multi-modal dataset collected with the low-cost Unitree Go2 quadruped across eight forest sites in the Southampton Common Woodlands, UK. For our dataset, over approximately 1.7 km of traversals in 11 sequences were conducted, yielding 69 recorded entrapment events. ForEnt includes time-synchronized RGB-D images, LiDAR scans, proprioceptive data, and third-person video, enabling analysis of terrain factors contributing to entrapment and providing labeled sensor streams for reproducible benchmarking. By supporting the evaluation of entrapment detection strategies, ForEnt lowers the barrier to developing robust quadruped robot deployments in challenging forest environments.

This paper presents an invariant extended Kalman filtering (InEKF) approach for real-time state estimation of humanoid robots operating on non-inertial ground using only onboard proprioceptive sensing. The proposed approach estimates the robot's base position and velocity relative to the moving ground frame without requiring direct measurements of ground motion or externally mounted sensors. By exploiting kinematic constraints at the stance foot through foot-mounted IMUs, the filter accounts for ground-induced nonlinearities in the process and measurement models while remaining fully proprioceptive. The estimator is formulated to admit a right-invariant measurement model, enabling favorable error dynamics under large initial uncertainties. Observability analysis establishes conditions under which the robot's relative base position and velocity are observable with respect to the non-inertial ground frame. Experiments with the Digit humanoid robot standing and squatting atop a swaying and pitching ground showcase a 96% speedup in convergence rate and an 80% reduction in position estimate errors over existing InEKFs. Walking experiments on a uni-axially rotating ground achieve an average estimation error of less than 9 cm for an initial error of up to 1 m.

Adaptation to damages and in-situ physical repairs is essential for long-term robot autonomy, yet challenging outside of narrowly defined and well-anticipated bounds. In this work we proprioceptively adapt to catastrophic damage in soft-actuated systems in under one minute. Architected materials are well equipped for adaptation: actuator failure occurs gradually rather than acutely, and damage can be described in a low-dimensional, discrete coordinate space. Surprisingly, latent damage representations plus a simple yet robust ensemble method is sufficient for adapting to unseen damage in real-time. Moreover, we identify conditions under which exponential sample complexity collapses to linear sample complexity for learned representations of architected materials, a concrete advantage over rigid components or continuum soft mechanisms. We demonstrate LEAP, our method for adaptive proprioception, via a tracing task for a 6DoF soft wrist based on Handed Shearing Auxetic (HSA) actuators. Our algorithm is able to adapt to cuts, burns, and actuator repairs, enabling simulation-free real-time adaptation that is critical for realizing the promise of soft robots outside the lab. Videos and more information are available at https://murpheylab.github.io/leap.

In this paper, we propose a method that applies Inertial-Leg (IL) tokenization to an attention-based network for proprioceptive state estimation in legged robots. Unlike existing learning-based state estimators that concatenate all sensor measurements into a single flat vector, the proposed architecture represents inertial measurements and leg-wise measurements as individual tokens and uses an attention mechanism to learn the relative importance of each measurement.This design allows the network to reweight each measurement according to the current contact condition, reflecting the fact that the reliability of forward kinematic measurements depends on whether the corresponding foot is in contact. Unlike conventional contact-aided estimators, however, the proposed method learns this behavior without relying on an explicit contact estimator or on explicit measurement updates based on a stationary contact assumption. To validate the proposed method, we conducted experiments on a Unitree Go1 robot, including debris terrain not modeled in simulation and gait patterns not seen during training. Experimental results show that the proposed method achieves better estimation performance than existing learning-based state estimators under unseen gait patterns and also improves performance over contact-aided model-based methods.

Distinguishing self from others is a prerequisite for social intelligence, yet humanoid robots that increasingly share workspaces with humans still lack this ability. Here we show that a humanoid robot can learn self-other distinction from proprioceptive-visual correspondence, without any identity labels or kinematic models. Once established, this distinction bootstraps a predictive self-model that maps joint configurations to three-dimensional body occupancy, capturing how the robot's body changes with action. In multi-agent scenes involving humans or morphologically identical robots, the system reliably identifies itself, learns a 3D self-model, and supports downstream tasks including target reaching, collision-aware motion planning, and human-to-robot motion retargeting. Together, these results outline a route toward bodily self-representation in robots that act and coordinate alongside others in shared physical environments. Project page: https://euron-zc.github.io/humanoid-self-model/.

Long-horizon robot mobile manipulation requires continual reasoning about localization, environment changes, and task progress, all of which are challenging to infer from image observations alone. In this paper, we show that conditioning a mobile manipulation policy on a spatiotemporal feature map improves reasoning over long horizons. The map represents the environment and the articulated robot body as neural points in a shared latent space and is updated online from egocentric observations and proprioceptive state. We update the environment neural points using object-level rigid tracking and the robot neural points using forward kinematics. We use our spatiotemporal environment and robot feature (SERF) map as a state input to a vision-language-action (VLA) model by extracting map tokens from multiple reference frames and spatial scales, providing the policy with both local and global context. We demonstrate SERF on BEHAVIOR-1K, a benchmark for long-horizon mobile manipulation in household environments. Experiments show that the SERF VLA policy outperforms image-only baselines, reaches subgoals faster by following more direct trajectories, improves robustness to scene-configuration shifts, and recovers from object-drop failures.

Exploratory manipulation often turns an apparent failed attempt into the key evidence for what to do next. For example, a robot pulls a locked cabinet drawer, fails, and only succeeds after opening the lock. The failed pull reveals a latent precondition (the drawer is locked) that determines the minimal-success action chain (the fewest actions that complete the task), here [lock-open, drawer-pull]. Correctly reading this trace is therefore the prerequisite for recovering that chain. We formalize this setting as Exploratory Manipulation Trace QA (EMT-QA): given synchronized video and proprioception from an exploratory trace, predict the minimal-success action chain under the latent precondition revealed by the probe. However, even state-of-the-art VLMs and embodied multimodal LLMs misread this evidence: they do not reliably recover the chain from raw video, raw proprioception, or their combination. We introduce Closed-Loop Trace Distillation, a pipeline that uses a per-task coding agent to inspect labeled training traces and distill a one-line natural-language prompt over the trace, which we call the Distilled Reading Heuristic (DRH). At inference, no agent is invoked and no model weights are updated; a frozen VLM receives the raw trace plus the DRH as a prompt entry. Across three simulator and two real-robot tasks, the DRH improves chain accuracy by +0.38 to +0.47 over the best raw-modality baseline. The same DRH also serves as the sole specification for one-shot programmatic classifiers that match the prompted VLM.

How does a system that merely predicts the world come to distinguish its own causal influence from everything else? We trace this transition in a minimal 192-dimensional GRU through 40 controlled experiments arranged as a developmental sequence, adding components one at a time and tracking whether the system can distinguish self-caused from world-caused changes. The developmental path reveals four conditions that must be satisfied in strict order: (1) persistent state forming stable attractors, (2) a causal action loop linking output to input, (3) proprioceptive feedback that makes implicit causal knowledge explicit, and (4) asynchronous awakening - perceptual learning must consolidate before action learning begins. We propose agency gain (A = Err_world - Err_self), the predictive advantage of knowing one's own action, as a metric to track this process. The self-aware predictor consistently outperforms the self-blind predictor across periodic (sinusoidal) and chaotic (Lorenz) environments, and the metric survives ablation of all auxiliary components. Only forward-sampled action selection produces meaningful agency gain; two gradient-based alternatives degenerate. Equally significant are 12 falsified hypotheses mapping where development stalls: predictive coding alone does not produce self-represent

Imitation-learning policies for robot manipulation inherit the quality of the success labels attached to their training episodes, and those labels are usually produced by the robot's own success check. A particularly damaging error is the false success: an episode the robot logs as a success when the task outcome was actually wrong. We ask a narrow but practical question about these episodes. Once an episode has already been flagged as a success, how much of the information needed to overturn that label is present in proprioception, and how much requires vision? We build a simulated testbed on two bimanual ALOHA tasks, induce failures through environment perturbations rather than label edits, label every episode by privileged simulator state that the detector never sees, and keep only episodes the robot flagged as successful. We then compare detectors restricted to proprioception against a vision-based detector. We find that recoverability spans a wide range: in cube transfer the false successes are almost fully recoverable from joint data alone, while in peg insertion proprioception recovers only part of them and a vision detector closes most of the gap. We also show that the proprioceptive separability we measure rests on velocity differences far below any realistic sensor noise floor, so it is best read as an optimistic upper bound that a noiseless simulator inflates. We release the generation and evaluation pipeline.

Autonomous Sensory Meridian Response (ASMR) is a somatosensory phenomenon characterized by pleasant tingling sensations and cardiovascular slowing. However, ASMR research has been hindered by a dearth of standardized, open-access multimodal datasets. To address this limitation, we present REST-ASMR (Response to Environmental & Sensory Triggers), a synchronized multimodal dataset designed to capture behavioral reports and physiological dynamics during ASMR, with nature-relaxation videos as control stimuli. The dataset includes high-resolution photoplethysmography (PPG), time-aligned audiovisual stimuli, and continuous subjective annotations from 34 participants. Technical validation showed high stimulus efficacy (97% responder rate), significant stimulus-specific inter-subject agreement (p < 0.05), and a robust PPG-derived ASMR-specific cardiovascular deceleration. Additionally, a Bidirectional Long-Short Term Memory model successfully predicted subjective ASMR tingle states, achieving video-level ASMR vs. Nature classification with perfect accuracy and a frame-level global mean accuracy of 75.51%, macro F1-score of 71.86%, and 100% Nature-baseline specificity, under a strict, leakage-free subject-video double-independent 4-fold cross-validation. REST-ASMR constitutes a dense temporal foundation for affective computing, multimodal research, and the development of personalized models of relaxation-related responses.

Soft wearable robotic systems have emerged as a promising solution for assisting individuals with reduced hand function. This paper presents SoFiE, a modular soft finger exoskeleton designed to assist index-finger flexion during grasping tasks. The proposed system is primarily fabricated using 3D-printed flexible materials, enabling a lightweight, low-profile, and modular design. Actuation is achieved through a tendon-driven mechanism powered by a compact DC motor, while passive extension is provided by a compliant conductive spring. This element, termed StretchSense, also functions as a proprioceptive sensor by exhibiting resistance changes under deformation. Furthermore, a novel tactile sensing approach, MagSense, is introduced, using a magnet and magnetometer pair embedded in a soft fingertip structure to estimate contact force and object compliance. The system is fully untethered and controlled by an embedded microcontroller. In addition, actuator-level sensing through motor encoder feedback enables estimation of the system state, providing a foundation for safe and adaptive control strategies. Experimental validation demonstrates the capability of the system to provide reliable pose estimation, distinguish between materials with different stiffness, and generate distinct sensor signatures across different grasping tasks. This paper details the design, fabrication, and sensing concepts of the proposed exoskeleton as a proof of concept toward modular, soft, and assistive wearable robotics.

Direct physical guidance is a natural means of teaching and interacting with robots, and robotic skins make a key contribution by enabling sensitive contact sensing and localization. This paper presents a tactile-proprioceptive sensor fusion framework for natural physical human-robot interaction. Tactile cues from pneumatic skin pads serve as contact indicators that bypass the ambiguity between frictional residues and applied external forces, enabling highly sensitive contact detection without explicit friction identification. We fuse these cues with motor-current-based proprioception to reconstruct multi-axis contact forces on the robot surface. To maintain accuracy during motion, we employ a temporal convolutional network (TCN) to mitigate friction hysteresis during stick-slip transitions, reducing uncertainty at contact onset and yielding smooth, responsive guidance. We validate the approach on a skin-integrated robot arm: (i) multi-axis forces are reconstructed in stationary contacts, and (ii) simultaneous force estimation and kinesthetic teaching are demonstrated. Results indicate improved sensitivity and responsiveness across diverse contact conditions compared with tactile-only and proprioceptive-only baselines, supporting tactile-proprioceptive fusion as a reliable pathway to safe, intuitive physical human-robot interaction.

Modern video generative models produce visually impressive results, yet frequently violate basic physical principles. We propose Proprio, a training-free framework that enables a frozen video generator to assess and improve the physical plausibility of its own outputs. Inspired by proprioception, the biological sense of one's own movement, Proprio treats the model's flow residual under controlled latent perturbations as a self-scoring signal. Samples that are better explained by the generator's learned dynamics induce smaller and more stable residuals. We aggregate this signal across timesteps and perturbations, focus it on motion-relevant regions with a dynamic spatiotemporal mask, and use it for best-of-N search, gradient-based self-refinement, or both. Across text-to-video and image-to-video benchmarks, Proprio consistently improves physical plausibility, outperforming VLM-based scoring, and external world-model baselines in several settings. With TurboWan2.2, Proprio improves Physics-IQ from 32.2 to 37.5 (+16.5%) and VideoPhy2-hard physical commonsense from 45.6 to 55.0 (+20.6%). Human evaluation further shows that raters prefer Proprio-selected or refined videos for physical plausibility in roughly two-thirds of comparisons. These results suggest that frozen video generators contain actionable internal signals for evaluating and improving the physical plausibility of their own outputs.

While Vision-Language-Action (VLA) models have emerged as powerful generalist policies, their severe vulnerability to adversarial patches significantly hinders their deployment in safety-critical domains. Moreover, existing patch attacks primarily focus on white-box settings, heavily overfitting to the specific action output space of the target model, which results in poor cross-architecture transferability. To overcome this limitation, we propose VLA-Hijack, a unified adversarial framework that breaks the transferability bottleneck by exploiting a fundamental vulnerability identified in this work: before planning any motion, a VLA model must first use visual information to locate its own robotic arm within the environment. Targeting this shared visual self-localization process, our approach concurrently optimizes Attention-Guided Proprioceptive Suppression to inhibit the real robotic arm's features, and Multimodal Proprioceptive Injection to establish the patch as a surrogate "phantom embodiment". By alternating between semantic concept anchoring and visual prototype projection, VLA-Hijack effectively severs the semantic relationship between the agent's true embodiment and its control policy. Extensive experiments across diverse architectures (OpenVLA, UniVLA, and CronusVLA) demonstrate that VLA-Hijack achieves superior optimization efficiency in white-box settings and sets a new SOTA for cross-architecture and cross-domain black-box transferability.

Robotic haptic devices combined with virtual reality offer novel opportunities to train fine force generation, an essential yet overlooked component of post-stroke rehabilitation. This study proposes that manipulating the rendered dynamics of tangible virtual objects can be leveraged to train precise force control while engaging the somatosensory system. We conducted an experiment with fifty healthy participants who performed a curling-inspired task in which they had to stretch a virtual spring to generate a target release force to propel the stone to a predefined location on the ice sheet. During training, the spring's force-elongation relationship was modeled as either a linear or non-linear function, i.e., a Gaussian or antisymmetric Gaussian (AS-Gaussian) function with zero derivative at the release target force. Results indicate that the AS-Gaussian group consistently achieved higher force accuracy during training than the linear group, while the Gaussian group only outperformed the linear group toward the end of training. Analysis of personality traits revealed that higher Free Spirit scores were associated with poorer performance and reduced task exploration under Gaussian dynamics, whereas higher Transform-of-Challenge scores correlated with increased exploration. Despite these training effects, no significant differences in long-term retention were found across spring types or personality traits. Participants primarily relied on learned target elongation rather than target force, as evidenced by performance in a transfer task with a different stiffness but the same target force. While promising for somatosensory neurorehabilitation, these methods require refinement to reduce reliance on proprioceptive cues before testing with neurological patients.

Humanoid parkour requires locomotion policies to coordinate whole-body dynamics across rapidly changing terrains such as stairs, gaps, slopes, and obstacles. Existing reinforcement learning policies are largely reactive, mapping observations directly to actions without explicitly modeling future body states. Such modeling becomes critical in agile locomotion tasks where successful motion execution depends strongly on anticipating upcoming contact transitions and body dynamics. We present ParkourFormer, a Transformer-based sequence modeling framework that reformulates humanoid locomotion as a future-conditioned decision-making problem. The current robot state queries historical sensorimotor trajectories through cross-attention, while a lightweight prediction head forecasts short-horizon future proprioceptive states. The predicted future states, trained with supervised signals, are fused with temporal features to generate actions, enabling the policy to jointly reason over motion history and anticipated future dynamics. We evaluate ParkourFormer on a diverse multi-terrain humanoid parkour benchmark including stairs, gaps, slopes, rough terrain, and obstacle traversal. Experiments in simulation and on a real humanoid robot show that ParkourFormer achieves a 93.85% average traversal success rate on highly challenging terrains, with improvements of up to 47.12% over strong MLP, MoE-based MLP, and vanilla Transformer baselines, while maintaining a single unified policy across all terrain types. These results demonstrate that explicit future-state modeling significantly improves robustness and generalization for agile whole-body locomotion.

Robots benefit from sensory information to coordinate body movement, gain robustness against perturbations, and transition between different modes to adapt to various terrains. However, few amphibious robots can sense interactions with both terrestrial and aquatic environments. In this paper, we present a solution that uses Hall-effect sensors to sense foot contact forces and lateral hydrodynamic forces on a salamander-inspired amphibious robot. With two bus lines, the robot can simultaneously acquire this exteroceptive information at more than 500 Hz and proprioceptive information, such as joint positions and loads, at 100 Hz. The Hall-effect sensors used are compact, making them suitable for embedding in multiple positions within a robot, and exhibit high sensitivity to small forces. Moreover, because the sensor can be positioned separately from the measured object, waterproofing can be implemented with relative ease. Our tests demonstrate the robot's capabilities in traversing amphibious environments and its potential in using feedback control for more complex locomotion tasks.

Legged robots carry an IMU, but the inertial solution drifts because consumer-grade IMUs are noisy. However, the feet create intermittent contacts with the environment that can be used to mitigate that drift. This report develops a sequence of increasingly expressive legged robot state estimators that leverage this. In all cases, the floating-base state comprises attitude, position, velocity, and IMU biases. To model foot contacts, we start from the contact-aided invariant EKF of Hartley et al., albeit at a reduced contact update rate. This is then augmented by replacing the measurement update by a small factor graph. Finally, we turn the same factors into a fixed-lag smoother with contact-episode footholds, with and without an evolving IMU bias. To facilitate reproducibility and further research in proprioceptive legged odometry, all four variants are available in GTSAM (Dellaert et. al), and we additionally provide a ROS2-compatible implementation.

One of the significant challenges in legged robotics is achieving accurate odometry using only onboard proprioceptive sensors. In this study, we present a complete leg odometry pipeline based on an Error-State EKF (ESEKF) that relies exclusively on proprioceptive data: a body fixed IMU, joint encoders, and force sensors, where filter's state is corrected by feet determined to be in a stationary stance. The core of our contribution is fused contact detection and an uncertainty quantification module designed to explicitly identify and reject slippage. This module runs two detectors in parallel for each foot, 1) a debounced, force-based Gaussian Mixture Model (GMM) guided Finite State Machine (FSM) to confirm physical contact, and 2) a kinematic-based Generalized Likelihood Ratio Test (GLRT) on the estimated velocity of the foot. The continuous quality scores from both estimators are fused to detect if the foot is both physically loaded and kinematically stationary and served as an uncertainty signal for each contact. To validate our approach, we collected a multi-modal dataset of 29 sequences spanning diverse indoor and outdoor terrains (e.g., concrete, grass, pebble, and rock) total of 2.4 km long. We benchmarked our approach against both proprioceptive and exteroceptive methods. The results demonstrate our method's efficacy in providing accurate odometry estimates, robustly handling slippage-prone environments. We also share our code and real-time ROS2 package as open-source.

In-hand object manipulation is a fundamental yet challenging capability for dexterous robots. Despite significant progress in dexterous manipulation, existing approaches rely heavily on vision or tactile sensing to track object states, while joint sensing -- the most readily available modality on any robotic hand -- remains largely overlooked, particularly for tendon-driven hands. In this paper, we study how far joint sensing alone can go by asking: (i) whether motor encoders or direct joint sensing provides better proprioceptive feedback, (ii) how to extract environment information from joint measurements, and (iii) whether joint-only control can achieve competitive real-world performance without external perception. We present the Proprioceptive Transformer (PT), an exteroceptive-free approach for continuous cube rotation on a tendon-driven dexterous hand that uses only joint sensing feedback. A teacher policy is first trained via reinforcement learning with privileged object information, then distilled into PT, which operates solely on joint position and velocity histories. The Transformer architecture effectively extracts implicit object state information from temporal patterns in joint sensor readings. Experiments on the real ORCA hand show that our approach achieves 3.1x higher rotation speed than baselines. We also demonstrate that our PT achieves a 23.4% lower RMSE for cube position estimation than the MLP baseline, indicating superior extraction of exteroceptive information from proprioceptive sources.

Autonomous navigation in GNSS-denied environments remains a core challenge for legged robots, where exteroceptive sensors such as LiDAR are prone to elevation drift in geometrically sparse or repetitive scenes. We present a factor graph architecture that augments the LIO-SAM framework with a parallel kinematic lane driven by proprioceptive leg odometry, coupled to the main LiDAR-inertial lane via an identity relative pose constraint with a selective noise model. Applied to a Linxai D50 quadruped platform across two outdoor loops totaling over one kilometer, our approach reduces elevation drift from over 30m to under 30cm and enables convergence in a scene where the baseline pipeline fails entirely. These results suggest that proprioceptive data, already computed onboard for gait control, constitutes a lightweight and effective vertical anchor for SLAM in GNSS-denied settings.

Vision-Language-Action (VLA) models have shown strong performance on embodied manipulation, yet they remain brittle under visual observation changes, paraphrased language instructions, and compounded perturbations. This limitation suggests that existing methods still rely heavily on shallow correlations in the training distribution, rather than learning stable couplings among task semantics, environment states, and action generation. Although recent efforts improve robustness through larger-scale training, post-training adaptation, or enhanced predictive modeling, they rarely enforce invariance-oriented consistency within the end-to-end policy itself. To address this issue, we propose RoVLA, a robust vision-language-action framework with multi-consistency constraints. RoVLA enforces consistency under three complementary transformations: instruction semantics, trajectory evolution, and observation perturbation. Specifically, Instructional Consistency (IC) promotes stable grounding under semantically equivalent instruction rewrites, Evolutionary Consistency (EC) preserves coherent action intent throughout the generation process, and Observational Consistency (OC) improves robustness to visual and proprioceptive perturbations by enforcing consistent predictions before and after targeted disturbances. By explicitly modeling these invariances during training, RoVLA reduces reliance on superficial correlations and improves robustness and generalization. Experiments on LIBERO-Plus, RoboTwin 2.0, and real-world manipulation tasks show that RoVLA consistently outperforms strong baseline methods and exhibits superior robustness under diverse task and observation shifts. These results demonstrate the effectiveness of multi-consistency learning for robust embodied control. Codes will be available at https://github.com/HCPLab-SYSU/RoVLA.

Humanoid and legged robots interact with the environment through intermittent contacts, making accurate motion estimation fundamentally dependent on reasoning about contact dynamics. However, standard sensing pipelines-whether based on onboard proprioception with Extended Kalman Filters (EKFs) or external motion capture systems-recover only kinematics, while contact forces, contact timing, and inertial parameters remain unobserved. As a result, purely kinematic reconstructions often violate rigid-body dynamics, particularly during contact-rich motions. To enable accurate motion estimation from onboard kinematics in real-world deployment, we propose PRIME (Physically-consistent Robotic Inertial and Motion Estimation), a Maximum A Posteriori (MAP) formulation that refines measured kinematics and actuator commands into a dynamically consistent trajectory while jointly estimating frictional contact forces and physically consistent inertial parameters. Our approach incorporates differentiable contact dynamics with smoothed complementarity constraints and an Anitescu-style friction model, yielding a smooth optimization problem that remains tractable across versatile contact transitions. We evaluate PRIME on contact-rich locomotion with quadrupedal robots and the Unitree G1 humanoid, demonstrating improved trajectory consistency and accurate inertial parameter identification. Beyond improving state estimation and feedback control with calibrated inertial parameters, PRIME produces force- and contact-annotated motion reconstructions from real robots in deployment, which can be used to provide high-quality data for downstream learning applications, including large-scale behavior modeling and robot foundation models.

Mild traumatic brain injury (mTBI) is a prevalent condition that remains difficult to diagnose in its early stages. Oculomotor dysfunction is a well-established marker of mTBI, motivating the development of portable tools that capture both eye-movement behavior and underlying neurophysiology. In this work, we present an initial framework that integrates electroencephalogram (EEG) with augmented-reality (AR)-based Vestibular/Ocular Motor Screening (VOMS) tasks to estimate subject-specific ocular response times. Pre-processed EEG signals, obtained through band-pass filtering and average referencing, are analyzed using a Redundant Discrete Wavelet Transform (RDWT)-driven deep neural framework. The RDWT coefficients are subjected to trainable zero-phase convolutional filtering and reconstructed into the time domain via inverse RDWT, followed by channel-wise temporal and spatial filtering using 2D convolution layers and convolutional-LSTM-based decoding. An ablation study demonstrates that wavelet-domain filtering serves as an effective denoising strategy, improving prediction performance. Sliding-window predictions were validated using Pearson correlation (>= 0.5), and Dynamic Time Warping (DTW) was subsequently used to estimate ocular response times. DTW-derived metrics revealed significant inter-subject differences across all VOM tasks, supported by Mann-Whitney U tests. Cross-correlation analysis further revealed task-dependent temporal behaviors: pursuit tasks exhibited reactive tracking, whereas saccades showed anticipatory responses. Overall, the results highlight pursuit tasks as particularly informative for distinguishing timing differences and demonstrate the potential of RDWT-based EEG features combined with DTW metrics for multimodal mTBI assessment.