Robot Failures

Virtual sensing, the estimation of hard-to-measure quantities from available sensor measurements, is a critical enabler for control and monitoring in cyber-physical systems. However, when sensors fail, learning-based predictors can produce physically implausible estimates that propagate to system-level failures. We argue that real-world deployment demands robustness and introduce MuViS-C, the first multi-domain benchmark of robustness against common sensor failures in learning-based virtual sensing. Building on an existing nominal-performance benchmark and established corruption taxonomies, it covers ten sensor failure modes, from subtle drifts to catastrophic signal dropouts, at multiple severities. These are paired with complementary robustness measures capturing average error under corruption, relative degradation, and worst-case fragility. Across nine datasets from six domains, we benchmark six architectures spanning gradient-boosted trees and the major inductive biases for sequence modeling: convolution, recurrence, attention, and MLP-mixing. On the attention-based architecture, we further probe three robustification strategies. We find that (i) every model degrades substantially under corruption, becoming worse than a naïve predictor on at least one corruption setting, (ii) gradient-boosted tree ensembles achieve strong robustness, and (iii) dedicated robustification closes the gap between the attention-based architecture and the most robust models, though each strategy hurts nominal performance. The benchmark's multi-domain design proves essential, as model rankings shift across datasets, and no single domain captures the full robustness picture. MuViS-C is open-source and extensible to new datasets, failure modes, measures, and models.

Unsupervised multivariate time series anomaly detection methods typically identify anomalies through forecasting, reconstruction, or representation discrepancies. However, industrial faults may first alter inter-variable structural patterns while individual trajectories remain close to normal, resulting in weak anomaly signals. In this paper, we propose GSLAD, a prototype-regularized graph structure learning framework that uses structural deviations for anomaly scoring. GSLAD adopts a two-phase training strategy. First, a condition-aware graph learner and a graph-based forecaster are optimized with predictive supervision. The inferred normal graphs are then clustered into multiple structural prototypes representing different normal operating regimes, with edge-wise variability characterizing structural uncertainty. Deviations from these prototypes regularize the graph learner in the second phase, encouraging stable and regime-specific structural patterns. During inference, uncertainty-normalized structural deviation is combined with predictive deviation for anomaly scoring. Experiments on four industrial benchmarks demonstrate strong overall performance of GSLAD and confirm the effectiveness of structural deviation for anomaly detection and diagnosis.

Large language models can produce engineering descriptions and structured process representations, but standards-level serialization can substantially increase the generation burden. This diagnostic study examines whether separating engineering reasoning from Data Exchange in the Process Industry (DEXPI) serialization changes where representation and engineering failures occur in constrained greenfield surface-process design for underground gas storage. We compare Direct DEXPI generation with generation of a lightweight Engineering Intermediate Representation (IR) on three cases: single-pressure injection, withdrawal and export, and dual-pressure injection. All six conditions use one fixed model snapshot, qwen3.8-max-0902, with one completed hosted generation per condition. Direct outputs are XSD-valid in 2 of 3 cases, while all 3 Engineering IR outputs are structurally valid under a minimal validator. Direct prompt inputs contain approximately 121.8k-121.9k tokens, compared with 617-699 tokens for the Engineering IR prompts. Engineering feasibility does not uniformly favor the IR: one IR output is rejected for an explicit cooling-state contradiction. The cases also reveal two distinct Direct DEXPI failure modes: engineering inconsistency and standards-level serialization failure. The observed comparison shows that, in these evaluated method bundles, deferring DEXPI serialization substantially reduces representation burden and helps isolate serialization failure, but reducing representation burden alone does not eliminate engineering inconsistencies.

Soft robots offer safe and adaptive interaction with humans and unstructured environments through their inherent ability to deform and comply. Pneumatic actuators are one way to build soft robots. They are typically made from soft silicone materials and are especially effective for driving such systems, enabling smooth and adaptable motion. However, their compliant nature also makes them vulnerable to mechanical failures like punctures and tears, limiting practical deployment. To address this, we propose a puncture detection system for soft actuators using motion data from a single inertial measurement unit. Extracted features are used to train anomaly detectors for puncture detection and non-linear models to estimate severity. We also introduce a multi-chamber pneumatic soft bending actuator capable of diverse configurations via selective chamber inflation. Our algorithm identifies the punctured chamber and provides a severity score using a chamber perturbation scheme. Anomaly detectors are trained on normal operation data and detect damage through reconstruction errors, while severity is estimated by a separate model trained under slightly modified conditions. Finally, we demonstrate a failure recovery strategy to maintain actuation force post-failure. This approach enhances the reliability and safety of soft robotic systems through real-time, data-driven damage detection.

Reinforcement learning (RL) post-training of large language models (LLMs) is computationally intensive and involves complex system pipelines with substantial debugging overhead. In practice, factors such as framework adaptation, numerical precision, and operator implementation can cause failures, including gradient overflow and loss divergence. Reproducing such failures directly on large models requires considerable time and computational resources. This paper systematically analyzes failures encountered during large-scale RL training on the Huawei Ascend platform, summarizes representative failure types, and identifies three model-side factors relevant to fault reproduction. Based on these factors, we propose a proxy-model construction method for low-cost fault investigation and auxiliary diagnosis. It employs structure-preserving, clustering-based expert pruning to select representative experts while retaining the model's backbone architecture, routing mechanism, and basic task capabilities. Our experimental results show that the proxy models reduce accelerator requirements by 50%-87.5% and achieve up to a 33.3x reduction in per-step NPU-hour cost, while preserving major training dynamics and reproducing fault responses consistent with the original models. Overall, the proxy models can serve as low-cost surrogates for fault reproduction, targeted validation, and auxiliary diagnosis in RL post-training.

Accurate fault location is critical for distribution network reliability. However, increasing distributed energy resource (DER) penetration complicates fault location due to intermittent generation and bidirectional power flows that reshape fault signatures. Spatio-Temporal Graph Neural Networks (STGNNs) have shown promise by jointly modeling spatial and temporal dependencies, but their behavior under increasing DER penetration has not been studied rigorously. In this paper, we (i) systematically benchmark spatio-temporal graph attention network (STGATv2) against purely temporal (gated recurrent unit, GRU), purely spatial (GATv2) and traditional machine learning baselines, and (ii) evaluate how well models generalize across increasing DER penetration levels (10%, 25%, 50%) on a reconfigured IEEE 123-bus feeder with multiple DER injection points and moderate-to-high impedance faults. Results show that STGATv2 consistently outperforms neural baselines, achieving 92-94% macro F1 in-distribution. Notably, generalization across penetration levels is asymmetric: training at 50% penetration retains near in-distribution F1 score at lower levels, whereas training at 10% degrades considerably at 50% - with STGATv2 retaining 81-84% F1 under these drastic shifts, substantially higher than GATv2 and GRU which drop to 69-74% F1 and 73-75% F1 respectively. Under realistic measurement noise, STGATv2 maintains > 85% F1, while GRU drops as low as 33.5% F1, highlighting the critical role of topological awareness for robust fault location in active distribution networks.

Supervised learning models in the predictive maintenance field are regularly trained on highly imbalanced industrial datasets: machine failures occur rarely but have a disproportionate effect on operations. In addition to the clear class disparity, failure data are typically non-homogeneous, with different failure modes arising from distinct physical processes and exhibiting a multimodal distribution across minorities and classes. Traditional imbalance-management methods, e.g., undersampling, SMOTE-based interpolation, or cost-sensitive learning, typically assume that the minority population is homogeneous. This means their effectiveness is severely limited in the multifaceted conditions encountered in industrial practice. This paper determines the possibility of a failure-type-conscious generative augmentation program to improve the identification of infrequent failures in predictive maintenance systems. An experimental design that is leakage-safe is used to compare five imbalance-handling methods: cost-sensitive learning, random undersampling, SMOTE oversampling, single-generator GAN augmentation, and a specialized multi-generator GAN architecture that has independent generators that are asked to learn individual failure subtypes. Precision/Recall-oriented measures are used to quantify model performance; the main evaluation measure is the PR-AUC. Experiments conducted on the AI4I 2020 predictive maintenance dataset indicate that the proposed multi-generator GAN framework produces more realistic minority samples, yielding higher PR-AUC and recall scores compared to traditional resampling methods and individual-generator GAN augmentation.

Open-access datasets for marine-engine predictive maintenance remain scarce, particularly those from controlled fault experiments with documented operating conditions, subsystem-level interventions and system-level measurements. This work presents the Marine Engine Fault Dataset, an openly available dataset from a turbocharged, intercooled three-cylinder marine diesel engine operated on a testbed under both reference and fault-scenario conditions. The experimental campaign combined a reference-performance program across the 30-90% load range with scenario-based tests in which abnormal conditions were introduced after stabilized fault-free operation, enabling controlled comparison between baseline and fault-affected behaviour. Five anomaly classes were implemented through physical interventions affecting major engine subsystems: cooling-water pump cavitation, compressor air-filter clogging, air-cooler fouling, injection-valve nozzle clogging and turbine degradation induced through increased exhaust-side restriction. The released data comprise multi-sensor time-series of operating, thermal, pressure, flow and combustion-related variables, with a separate reference-performance record and metadata for structured reuse. Technical validation shows that the reference measurements remain physically coherent across the operating range and that the imposed anomalies produce interpretable response patterns consistent with the affected subsystems, including progressively distinguishable behaviour where different severities were implemented. By combining controlled fault realization, multi-load operation and system-level measurements within a real marine-engine platform, the dataset provides a well-documented benchmark for anomaly detection, fault diagnosis, degradation modelling and related condition-monitoring studies in maritime machinery.

Methods for discovering rare failures in autonomous systems have so far been demonstrated almost exclusively in simulations with simple, academic driving stacks, leaving open whether they generalize to the more robust planners used in commercial systems. We address this gap by applying two rare-event discovery algorithms to a commercial autonomous trucking stack. Adaptive stress testing (AST) uses reinforcement learning to search for the most likely noise trajectories leading to a simulated collision, while diffusion-based failure sampling (DiFS) trains a denoising diffusion model to sample a diverse set of failures. We show that both algorithms find simulated collisions during merge and cut-in maneuvers where traditional Monte Carlo simulation does not. To make these failures actionable, we introduce a statistical analysis based on principal component analysis (PCA) that classifies failures into common modes and identifies the timesteps that most influence the outcome. We cluster the principal components and invert the PCA transform to recover generalized noise trajectories, and show that these trajectories reproduce failures in identical and similar scenarios. This provides a path from failure discovery to systematic diagnosis of perception-level flaws.

This work demonstrates experimentally the existence of a hexarotor prototype, termed Opti-Hexa, that simultaneously achieves practical resilience to single-propeller failures and energy efficiency comparable to a standard Star-shaped prototype with the same size, weight, hardware and software. Leveraging a novel open-source morphing platform, we investigate the trade-offs across a continuous range of geometries by varying the angles between adjacent propellers. We study practical efficiency through a data-fitted empirical power model and evaluate practical resilience by comparing the position accuracy and rotational kinetic energy during failure to those observed under nominal hovering conditions. Our experiments confirm the existence of a geometric viability region for this specific morphing platform, where resilience is ensured without the aerodynamic efficiency losses typically associated with practically resilient designs found in the state of the art. The complete hardware and software of the morphing platform are released to support further research.

Deep Neural Networks (DNNs) used in safety-critical applications are vulnerable to hardware and memory faults that corrupt network weights and degrade reliability. In this paper, we propose a Center of Gravity (CoG) guided weight correction method that restores faulty weights based on their spatial characteristics within each layer. The proposed approach detects and corrects weight faults using distance-aware correction rules, eliminating the need for retraining or architectural modification. The effectiveness of the proposed method in terms of the capability of tolerating hardware faults has been evaluated through performing fault injection at different Bit Error Rates (BERs). Experiments on safety-critical LSTM-based Networks, including StageNet for disease progression tracking and MTFNet for cardiac anomaly detection, demonstrate fault tolerance improvements of up to 230x and 6.41x, respectively, at a BER of 10^{-3}, with negligible accuracy loss. When extended to Convolutional Neural Networks (CNNs), the method achieves up to 49.55x and 20.79x improvements under comparable fault conditions on ResNet-18 and VGG-16, respectively. To the best of our knowledge, this is the first work to apply the CoG concept to neural network weight tensors for enhancing model reliability.

Fault trees are a widely used as effective risk models for complex systems, answering the question "what can go wrong?", especially through minimal cut set analysis. We study fault trees from the perspective of Halpern & Pearl's theory of actual causality. This allows us to use fault trees to answer the question "why has it gone wrong?", which is fundamental to failure diagnostics. We give a complete classification of each of the different notions of actual causality in terms of the fault tree's graph structure and logical structure, and show how minimal cut sets give rise to actual causes.

Understanding how users perceive and respond to robot failures is essential for building robust and trustworthy robot systems. Prior work, however, (i) often treats failures as independent events, (ii) emphasizes binary failure detection, (iii) with rule-based recovery modeling. We present REPAIR-Bench, built on 214 interaction trials from 41 participants, the benchmark spans four induced failure types and provides synchronized facial action units, head pose, speech transcripts, and post-interaction affect and recovery reports. The benchmark spans three novel evaluation tasks that jointly capture the lifecycle of failure in human-robot interaction (HRI): (i) failure detection over inter-dependent interaction sessions, modeling longitudinal user adaptation across repeated failures; (ii) visual failure-type classification beyond binary success/failure formulations; and (iii) user-centered recovery prediction, inferring users' preferred recovery strategies from interaction context rather than relying on manually designed or rule-based strategies. In baseline experiments, hierarchical recurrent modeling improved failure detection over a single-session model (strict F1: 0.80 vs. 0.68), achieved a failure localization mean signed error of -0.51 s, median absolute error of 2.97 s and, for recovery prediction, a QLoRA-tuned Mistral-7B reached Hit@5=0.76 and F1@5=0.32. REPAIR-Bench provides both the HRI and Medical HRI communities with a standardized framework for (1) evaluating robot failures and (2) building transparent, adaptive, and trustworthy recovery systems.

A central question in robot learning is how to acquire skills from the kinds of data that humans learn from: passive observation, embodied practice, and the experience of failure. Human videos provide the first of these in abundance, and prior work has shown they can initialize useful policies. Far less clear is whether they can support the second and third: whether priors extracted from human videos can ground a robot's own attempts well enough to evaluate them, correct them, and improve from them. In this work, we show that human videos can be used to learn embodiment-agnostic action, dynamics, and value representations that transfer across robot embodiments, providing the predictive foundation required for robots to autonomously improve from their own rollouts and failures. We introduce Dynamics-Guided Action Correction (DGAC), a training-free approach that leverages these adapted models to repair failed states: each failure becomes a query for which the learned models propose and rank corrective actions, turning failures into supervision for the next policy update. Across seven real-world manipulation tasks spanning both a mobile manipulator and a static manipulator arm, our approach improves success rates from 40% to 81% across multiple policy backbones, demonstrating cross-embodiment robot self-improvement from human-video priors. These results show that human priors and robot failures can be combined to enable scalable autonomous policy improvement. Project page: https://ethz-mrl.github.io/robot-self-improvement-website/.

In minimally invasive surgical robotics, catheter-scale Fiber Bragg Grating (FBG) sensors are promising due to their ability to estimate multi-dimensional forces by multiplexing several optical channels. However, deploying these compact multi-channel sensors introduces two critical engineering challenges: inherent nonlinear cross-axis coupling during complex deformations, and intermittent channel dropouts caused by fiber fractures in constrained workspaces. These compounding issues severely degrade force estimation. Existing fault-tolerant approaches rely on combinatorial model banks, which scale exponentially with the channel count and demand prohibitively expensive per-pattern calibration. In this paper, we propose a unified, self-supervised mask-aware Transformer that explicitly models channel availability to enable graceful degradation under diverse and dynamic sensor failures. The encoder is pretrained via masked-channel reconstruction on unlabeled data streams and fine-tuned for force regression using a balanced clean-and-corrupted-view objective alongside a dynamic corruption curriculum. Furthermore, a parallel uncertainty head, trained via heteroscedastic Gaussian negative log-likelihood, predicts per-axis confidence in a single forward pass, circumventing the overhead of multi-pass ensembles. Evaluated on a catheter-scale 8-channel FBG dataset, our single unified model achieves a nominal Root Mean Square Error (RMSE) of 0.0066N and degrades gracefully to 0.0126N under severe 4-channel failures. This significantly outperforms a comprehensive model bank of 255 per-pattern neural networks (0.0154~N at 4-channel loss) while eliminating pattern-specific calibration.

Time series forecasting (TSF) underpins consequential decisions in energy, transportation, finance, and healthcare, yet TSF models are almost universally ranked by a single number (e.g., average error) on clean held-out data, under the implicit assumption that it predicts deployed reliability. However, real faults are not i.i.d noise but structured events with temporal shape, broken cross-variable dependencies, regime change coupled with missingness, and causal propagation across a sensing pipeline. Treating TSF robustness as a data-quality problem, we present TS-Fault, a benchmark that evaluates forecasting models under explicit, parameterized fault scenarios with controllable semantic difficulty. TS-Fault organizes recurring failures into four modes along two orthogonal axes (observation- vs mechanism-level; univariate vs multivariate) and injects each fault into the most prediction-critical window via a unified importance score. This design enables robustness to be tested against the structures models actually rely on, rather than reduced to generic noise sensitivity. We evaluate 21 models across 6 datasets, 4 modes, and 5 difficulty levels under a paired clean/corrupt protocol. The results reveal three findings that contradict common leaderboard intuition: (i) clean-data accuracy anti-correlates with robustness; (ii) clean rankings are preserved under observation-level faults but reshuffled under mechanism-level faults; and (iii) all catastrophic failures occur under mechanism-level faults, with foundation models achieving the highest clean-data accuracy yet exhibiting the greatest fragility. The code is publicly available at https://github.com/Ray-zyy/TS-Fault.

Intelligent robots should not only recover from failures, but also acquire the abstract knowledge needed to avoid them in the future. While reinforcement learning (RL) can learn reactive recovery behaviors, training a separate policy for every distinct failure mode is highly inefficient. We introduce Recovery-Driven Synthesis of Relational Concepts (ReSYNC), the first approach that progressively discovers and refines state abstractions (relational predicates) from failure-recovery experience to support abstract planning. Unlike purely reactive methods, ReSYNC jointly learns skills and concepts through an incremental dual-learning process. In the skill-learning phase, the robot uses RL to learn to recover from failures seen in training tasks. In the concept-learning phase, the robot discovers new relational predicates and refines its abstract planning model to explain and generalize the learned recovery behaviors. This interaction enables ReSYNC to convert local recoveries seen during training into global failure avoidance at test time. Across four simulated domains, we show that ReSYNC's ability to continually expand and refine its abstraction library allows it to solve long-horizon, previously unseen problems, outperforming strong baselines by over 50%. Additionally, we demonstrate sim-to-real transfer of ReSYNC, where it performs real-world non-prehensile manipulation skills and generalizes to unseen scenarios through abstract planning. Overall, ReSYNC represents a significant step toward robots that autonomously acquire abstractions for scalable, failure-aware planning in the physical world.

Large Vision Language Models (VLMs) excel at visual question answering and semantic grounding, but their capacity for autonomous logical reasoning remains underexplored. Existing anomaly benchmarks emphasize visual errors or direct prompting rather than the physical and social common sense needed for open-world deployment. To address this, we introduce LAD-bench, a benchmark of more than 1,000 curated synthetic images with logical anomalies across four domains: Residential, Urban, Collaborative, and Nature. We further propose a Tiered Prompting Protocol based on progressive disclosure, which measures how much explicit assistance a model needs to localize and reason about a logical fault. Evaluating leading foundation models reveals substantial weaknesses: even the best achieves only 70.11% overall accuracy, showing that implicit logical fault detection remains unsolved. Crucially, models often fail to identify anomalies even after receiving explicit hints in deeper tiers. By surfacing these limitations in sequential multimodal reasoning, LAD-Bench offers a rigorous framework for advancing the safety, reliability, and cognitive alignment of autonomous visual systems. Dataset and Code: https://huggingface.co/datasets/SahasraK/LADBench

The UK government has adopted a pro-AI stance to help transform public service delivery in the face of severe financial pressures, but the path to translate this vision into responsible AI practice remains ill-defined. While UK policy is often set at the national level, local authorities are responsible for most public service delivery, and the rapid advance of AI-first narratives in the public sector is exposing fault lines in knowledge and practice at this national-local interface. This paper examines how responsible AI is interpreted and implemented at the interface between the UK's central government and local authorities, taking the high-stakes area of Special Educational Needs and Disabilities (SEND) as a case study. We present a thematic analysis of 17 semi-structured interviews with policymakers, practitioners, and third-sector professionals to identify barriers and enabling conditions for responsible AI where national policy meets local practice. We identify five interconnected challenges facing local authorities: shadow usage of AI and data privacy risks, market-government asymmetry in AI provision, insufficient workforce readiness, a lack of standardised definitions and measurements, and gaps in human accountability. For each, participants proposed actionable steps, from strengthening data protection frameworks and rebalancing the market-government relationship to enhancing workforce capacity. Our examination of SEND brings these challenges into sharper focus, showing how high-stakes decisions affecting vulnerable children and families intensify tensions around accountability, fairness, and human oversight, exposing the limits of a principle-based regulatory approach. We argue that responsible public sector AI requires both national policy adjustments and structural reforms to institutional capacity, values, and governance mechanisms at the local level.

Deploying Vision-Language-Action (VLA) models in real robotic systems requires robustness not only to semantic and perceptual variations, but also to embodiment-side faults that change how actions are physically realized. Real robots can experience joint-level changes caused by actuator degradation, hardware faults, safety limits, collision damage, or wear-induced friction. These faults are critical because they alter the action-to-motion interface of a policy, disrupting the learned closed-loop relationship between commanded actions, realized motion, and subsequent observations. In this work, we study realistic joint-level physical faults and show that VLA models are vulnerable when predicted actions are executed through a perturbed robot body. Our analysis reveals joint-dependent effects, with heterogeneous degradation in task success across affected joints. We also show that performance drops cannot be attributed solely to physical infeasibility, since feasible faults such as increased joint friction can still substantially reduce success rates and induce closed-loop execution mismatch. Motivated by these findings, we propose Joint-level Physical-fault Aware Residual Calibrator (J-PARC), a lightweight residual calibration framework built on top of a frozen VLA policy. J-PARC infers a latent joint-fault regime from recent joint dynamics and conditions a shared residual calibrator on this regime, enabling adaptive action correction across faulty joints. Experiments show that J-PARC improves robustness under joint-level faults while preserving fault-free environment performance.

Federated Learning (FL) allows a set of clients to collectively train a global model without sharing local training data. Giving the responsibility of the training to decentralized actors may lead to poisoning attacks: clients controlled by malicious third party potentially poison the training dataset to install a backdoor in neural networks. In FL, these backdoor attacks rely solely on algorithmic approach, however, recent advances in hardware faults threats (e.g, Rowhammer) have widen the overall attack surface. In the context of federated model adaptation, we introduce a novel category of backdoor attack against FL systems that relies on model poisoning based on hardware-fault attacks. More precisely, we propose a task-agnostic backdoor attack that is implanted during the FL training time by inducing hardware faults (bit-flips) in parameters of a single local model. The backdoor is crafted during a previous offline phase from the pretrained model initially used by the FL system. Our results show that a backdoor can be successfully applied on different type of models and datasets. Typically, with up to 10 faults per malicious client occurrence and 19 total occurrences on a ResNet-18 are enough to reach 94% of attack success rate. Finally, we discuss the practicality and the robustness of the attack potential defenses, while putting into perspective the practical constraints of Rowhammer, which is the preferred attack vector for this type of threats.

Abrupt total rotor failures can invalidate nominal allocation despite remaining wrench capability. This paper develops an allocator-layer passive fault-tolerant control (AL-PFTC) scheme for overactuated vector-thrust aerial vehicles. Analysis of convexified attainable force and torque spaces at horizontal hover compares biaxial- and uniaxial-tilt configurations and screens fault cases using prescribed reserve thresholds. Instantaneous wrench loss relative to these reserves characterizes the initial redistribution burden. AL-PFTC adapts the allocation matrix using a virtual error derived from filtered wrench commands and an onboard external wrench estimate, with adaptive parameter bounds constructed from right inverses. Joint analysis including estimator residuals and filter dynamics establishes local uniform ultimate boundedness for position and attitude regulation under the stated conditions. Controller-layer passive fault-tolerant control (CL-PFTC) provides a reference with nominal allocation and observer compensation. Both share a nominal tracking baseline and run at 600 Hz on an STM32H753 without explicit fault identification, fault-mode switching, or online optimization. Comparisons show that AL-PFTC satisfies the recovery criterion in more tested hovering cases than CL-PFTC. Additional experiments using only onboard sensing, including indoor tracking under wind disturbance, outdoor tracking under wind and low-temperature conditions, narrow-frame traversal, and contact-based aerial writing, further validate the robustness of AL-PFTC in complex operational environments.

Reliable object detection is critical for automated driving, yet even state-of-the-art detectors inevitably make errors that can compromise safety. Introspection methods that predict detector failures enable safer deployment by triggering fallback mechanisms or alerting human operators. However, existing approaches rely solely on last-layer features or hand-crafted statistics, discarding valuable information from earlier layers that capture different levels of visual abstraction. We propose Layer Feature Attention (LFA), a lightweight introspection method that learns to aggregate features from multiple backbone layers through an attention mechanism. Our key insight is that detection errors manifest differently across feature hierarchies: low-level layers capture fine-grained details essential for detecting small or occluded objects, while high-level layers encode semantic information for scene understanding. LFA learns layer importance weights end-to-end, enabling both improved error prediction and interpretable analysis of which feature levels are most indicative of detector failures. Extensive experiments on KITTI and BDD100K demonstrate that LFA achieves state-of-the-art introspection performance, outperforming single-layer baselines across multiple detector architectures.

Despite the remarkable success of multi-modal bird's-eye view (BEV) perception in autonomous driving, current systems exhibit a critical vulnerability: existing fusion mechanisms are highly brittle to sensor corruptions, often causing catastrophic performance degradation. This vulnerability largely stems from the fact that standard fusion frameworks typically integrate multi-modal representations in a static manner, leading to a precipitous performance collapse under missing or corrupted modalities. In contrast, we show that graceful degradation is achievable through active modality reliability assessment. To this end, we present Grace-BEV, a lightweight and plug-and-play framework that enforces active reliability awareness during multi-modal fusion. Instead of relying on computationally expensive cross-modal interactions, Grace-BEV leverages the aligned BEV space to explicitly assess modality trustworthiness via a TrustGate Router and dynamically recalibrate feature integration using the FailSafe Fusion Block. Furthermore, we devise a Three-Phase Training strategy with Modality Dropout to prevent modality dominance and encourage balanced cross-modal learning under unreliable inputs. Extensive experiments on nuScenes-R and nuScenes-C show that Grace-BEV maintains robust performance across diverse corruption settings. Notably, under catastrophic LiDAR failures where standard baselines collapse to 0.0% mean Average Precision (mAP), Grace-BEV restores performance to as high as 34.7% mAP. Moreover, it improves clean accuracy by up to 1.4%, achieving a strong trade-off between robustness and efficiency.

Autonomous drone swarms deployed for surveillance, environmental monitoring, and infrastructure inspection must maintain reliable coverage of critical assets despite robot failures. This requires multicoverage: each asset must be observed by multiple robots for redundancy, with coverage requirements varying by asset importance. While recent work has solved the centralized problem optimally using integer programming, practical deployments face constraints that demand distributed solutions: robots operate with limited communication ranges, onboard computation restricts global planning, and partial system failures must not cause mission abort. We present a distributed multicoverage algorithm for robot swarms operating with local sensing, local communication, and no global coordination.

Multimodal sensor fusion has demonstrated remarkable performance improvements over unimodal approaches in 3D object detection for autonomous vehicles. Typically, existing methods transform multimodal data from independent sensors, such as camera and LiDAR, into a unified bird's-eye view (BEV) representation for fusion. Although effective in ideal conditions, this strategy suffers from substantial performance deterioration when camera or LiDAR data are missing, corrupted, or noisy. To address this vulnerability, we develop a framework-agnostic fusion module for camera and LiDAR data that allows for handling cases when one of the two modalities is missing or corrupted. To demonstrate the effectiveness of our module, we instantiate it in BEVFusion [1], a well-established framework to combine camera and LiDAR data for 3D object detection. By means of quantitative experiments on the MultiCorrupt dataset, we demonstrate that our module achieves favorable performance improvements under scenarios of missing and corrupted modalities, substantially outperforming existing unified representation approaches across a wide range of sensor deterioration scenarios and reaching state-of-the-art performance in scenarios of corrupted modality due to extreme weather conditions and sensor failure.

Fault location in distribution grids is critical for reliability and minimizing outage durations. Yet, it remains challenging due to partial observability, given sparse measurement infrastructure. Recent works show promising results by combining Recurrent Neural Networks (RNNs) and Graph Neural Networks (GNNs) for spatio-temporal learning. Still, many modern GNN architectures remain untested for this grid application, while existing GNN solutions have not explored GNN topology definitions beyond simply adopting the full grid topology to construct the GNN graph. We address these gaps by (i) systematically comparing a newly proposed graph-forming strategy (measured-only) to the traditional full-topology approach, and (ii) introducing STGNN (Spatio-temporal GNN) models based on GraphSAGE and an improved Graph Attention (GATv2), for distribution grid fault location; (iii) benchmarking them against state-of-the-art STGNN and RNN baselines on the IEEE 123-bus feeder. In our experiments, all evaluated STGNN variants achieve high performance and consistently outperform a pure RNN baseline, with improvements up to 11 percentage points F1. Among STGNN models, the newly explored RGATv2 and RGSAGE achieve only marginally higher F1 scores. Still, STGNNs demonstrate superior stability, with tight confidence intervals (within +/- 1.4%) compared to the RNN baseline (up to +/- 7.5%) across different experiment runs. Finally, our proposed reduced GNN topology (measured-only) shows clear benefits in both (i) model training time (6-fold reduction) and (ii) model performance (up to 11 points F1). This suggests that measured-only graphs offer a more practical, efficient, and robust framework for partially observable distribution grids.

In the maintenance of complex systems, fault trees are used to locate problems and provide targeted solutions. To enable fault trees stored as images to be directly processed by large language models, which can assist in tracking and analyzing malfunctions, we propose a novel textual representation of fault trees. Building on it, we construct a benchmark for multi-turn dialogue systems that emphasizes robust interaction in complex environments, evaluating a model's ability to assist in malfunction localization, which contains $3130$ entries and $40.75$ turns per entry on average. We train an end-to-end model to generate vague information to reflect user behavior and introduce long-range rollback and recovery procedures to simulate user error scenarios, enabling assessment of a model's integrated capabilities in task tracking and error recovery, and Gemini 2.5 pro archives the best performance.

We consider grassroots platforms -- distributed systems of agents consisting of people identified by self-chosen public keys and their machines (smartphones) -- and wish to make them secure against \emph{major faults}: the loss of their private keys and/or their smartphones. As grassroots platforms have no global resource to rely on for recovery, our peer-based solution is based on: (\ia) \emph{a grassroots social graph} in which agents establish and maintain friendships; (\ib) \emph{identity custodians}, designated by each person, and (\ic) \emph{state custodians}, which are grassroots platform-specific. Upon a person experiencing identity loss, and given a willing supermajority of the identity custodians of the person, the friends of the person replace the old public key with the new one across the graph and restore friendships, where all friends serve as state custodians for the social graph. Choosing a new keypair, obtaining a new smartphone, and convincing identity custodians to will a change of key all happen ``off-chain''. Recovery from machine loss without loss of key (e.g. smartphone run over by truck, or its memory wiped) is simpler, requiring only the help of state custodians. We specify the social graph and its secure version as guarded multiagent atomic transactions, and implement the secure social graph via communicating volitional agents, an eventually synchronous message-passing model one step closer to implementation. We prove the implementation maps runs with recoverable faults to correct runs of the specification. We follow a similar path for grassroots coins and bonds, showing a common core as well as the platform-specific aspects of state recovery: a currency's single-writer log is recovered exactly, the recovered sovereign resuming without double-spending.