Robotic Manipulation

The growing volume of retired lithium-ion battery packs from electric vehicles and portable electronics calls for automated disassembly that is safe, flexible, and selective down to the individual cell. Existing robotic systems, however, mostly assume known pack poses, external fixtures, or specialised tooling, leaving fixture-free cell-level disassembly under pose uncertainty largely unsolved. This paper presents a vision-guided dual-arm pipeline that disassembles a 21-cell 18650 pack from an arbitrary initial pose using only general-purpose parallel-jaw grippers, RGB-D sensing, and a pre-trained grasp detector. Pose uncertainty is absorbed by a learn-and-filter perception stack with discrete look-and-move wrist-camera corrections, while a mid-task support transfer between the two arms extends the effective workspace without any external clamp. The pipeline achieves an 8/10 end-to-end success rate, a cell-localisation root-mean-square error of $2.4$,mm, and a mean cycle time of 6.0,minutes per pack, providing a practical, fixture-free building block for industrial battery recycling.

Manipulation understanding requires reliable relational evidence, such as contact, support, containment, motion coupling, grasp, release, and active-hand involvement. Although these visual predicates are widely used in event-chain, graph-based, and neuro-symbolic models, their reliability under visual degradation is rarely analyzed directly. This paper introduces a predicate-level reliability framework for robust manipulation understanding under blur, occlusion, illumination change, low resolution, frame dropping, and detection noise. The framework defines a structured predicate vocabulary, confidence-aware predicate estimation, and reliability metrics for predicate preservation, degradation sensitivity, temporal consistency, confidence-weighted stability, and downstream impact. Experiments on controlled manipulation videos and public egocentric or bimanual datasets, including VISOR/EPIC-KITCHENS, H2O, and ARCTIC, show that predicate failures are structured rather than uniform. Static spatial predicates remain comparatively robust, whereas contact-sensitive, dynamic, and derived predicates such as grasp and release are more fragile. Under severe degradation, detection noise, occlusion, and frame dropping cause the strongest reliability losses. Downstream analysis shows that degraded predicates reduce manipulation-understanding accuracy from 0.89 to 0.58, while removing confidence weighting under moderate degradation reduces accuracy from 0.74 to 0.64. These results show that predicate reliability provides a diagnostic layer between visual perception and structured manipulation reasoning.

Egocentric RGB-D videos offer a natural source of human dexterous manipulation demonstrations, but existing data is difficult to use for robot learning because object pose, geometry, and contact information are often missing or require pre-scanned object assets. We present EgoAERO, the first framework that learns dexterous manipulation from a single egocentric RGB-D human demonstration without object assets. EgoAERO reconstructs contact-consistent hand-object trajectories through asset-free object tracking and reconstruction, ego motion compensation, and adaptive contact optimization, then converts them into robot policies using two-stage residual learning. We further introduce an online quality assessment mechanism and construct EgoDex-R, a large-scale egocentric dataset with 4.3M RGB-D frames for dexterous policy learning. Simulation and real-world experiments show that EgoAERO enables single-demonstration dexterous manipulation and achieves downstream performance close to CAD-based reconstructions on HOI4D.

Discrete Vision-Language-Action (VLA) models typically formulate action generation as next-token prediction over discretized action spaces, conditioning each token autoregressively on prior context. While effective, this paradigm incurs high inference latency and largely ignores the temporal structure inherent in action trajectories. Recent efforts introduce parallel decoding to improve efficiency, enabling faster inference, but lack explicit mechanisms for modeling token dependencies. We introduce TBD-VLA, a discrete token-based VLA framework that incorporates block diffusion to enable temporal action generation. We partition action sequences into temporal blocks and perform masked discrete diffusion within each block, while maintaining autoregressive generation across blocks. This design unifies temporal autoregression and parallel action decoding, achieving both strong temporal coherence and improved inference speed. In addition, the explicit temporal modeling enables asynchronous execution of action chunks (e.g., Real-Time Chunking) via temporal in-painting. TBD-VLA significantly outperforms prior VLA approaches in both simulation and real-world manipulation tasks, offering a scalable path toward fast, temporally aware, discrete VLA models. Project webpage: https://tbd-vla.github.io/

The object manipulation capabilities of quadruped robots is an open research challenge. While previous studies have focused on low-level policy learning, task execution still relies on expert-designed high-level trajectories. Autonomous selection of both an affordable interaction point on the target object and an affordable robot base pose removes the need for pre-designed trajectories. This study proposes a three-level hierarchical reinforcement learning (RL) framework that utilizes pose affordances to guide the navigation policy, while the navigation policy drives the locomotion policy. In addition, the pedipulation policy is guided by interaction-point affordances, enabling object-centric pose alignment of the quadruped robot and effective end-effector manipulation planning. We train the proposed framework in the IsaacSim ecosystem and evaluate it in both simulation and real-world settings. We investigate the effectiveness of pose affordance across multiple scenarios in simulation while various object interaction tasks are validated on real-world setting forming an object-interaction dataset. The results show that the proposed framework can autonomously identify candidate poses based on their affordance and successfully execute object manipulation tasks in the real world without human guidance.

Open-vocabulary long-horizon manipulation requires robots to reason over flexible instructions and complex multi-object scenes while adaptively planning, executing, monitoring, and recovering from failures. We address these demands with a closed agent loop in which a VLM orchestrates heterogeneous robot capabilities as interruptible tools. Unlike in virtual AI agents, the timing of decisions, actions and tool calls is important in a physical world that does not pause for reasoning. We refer to this setting as Physical Orchestration, and propose VoLoAgent, a VLM that plans, monitors, and recovers by treating a VLA/WAM as an interruptible tool it steers mid-rollout alongside vision models and action primitives. To evaluate these long-horizon capabilities, we introduce RoboVoLo, a high-fidelity benchmark for open-vocabulary long-horizon manipulation across common sense, memory/state tracking, complex references, and world knowledge, with both task-level success and failure-mode diagnostics. Experiments show VoLoAgent substantially outperforms single VLA/VLM or tool-based systems, with validation on real-robot experiments. Project page: https://chicychen.github.io/VoLo/

Modern imitation-learning policies for robot manipulation often represent actions as fixed-resolution action chunks, which are simple and effective but expose limited geometric and temporal structure before execution. This paper studies Spline Policy (SP), a structured representation that replaces action chunks with spline parameters while keeping the policy backbone unchanged. The predicted spline can be decoded as a compact continuous trajectory, queried at different temporal resolutions, constrained or edited in parameter space, and passed to downstream controllers. For quadratic spline outputs, the same representation can also be converted into a state-dependent vector field through an analytical distance-field construction. Under the regularity and projection assumptions of this construction, the induced dynamics do not increase the distance to the generated spline, yielding a principled local corrective mechanism around the predicted motion. The spline output further supports uncertainty propagation from observations to spline parameters, trajectories, and flow fields, and can be combined with classical control mechanisms such as null-space collision avoidance without retraining the policy backbone. We instantiate SP with diffusion, flow-matching, transformer-based, and vision-language-action backbones. Experiments in low-dimensional motion learning, simulated manipulation under matched backbones, dexterous manipulation, and real-robot case studies show that SP remains compatible with modern policy learners while exposing useful motion-structure properties, including compact decoding, temporal resampling, local correction around predicted motions, uncertainty evaluation, and controller compatibility.

Most vision-language-action (VLA) models map observations directly to actions without explicit intermediate planning, which limits performance on long-horizon tasks where early mistakes compound. We propose Coarse-to-Control, a plan-execute VLA that introduces planning natively in the action-token space. The key idea is to let the policy first predict a compact sequence of coarse action tokens that summarize the intended future trajectory, and then generate executable action tokens conditioned on this plan. Because both planning and execution share a unified discrete action vocabulary, the plan stays close to the control manifold and provides directly actionable guidance rather than an abstract hint that must be translated back to motor commands. Experiments on LIBERO, SimplerEnv-WidowX, and real-world manipulation tasks show that action-token planning consistently improves over direct action generation, with the largest gains on long-horizon multi-stage tasks.

Visual-language action (VLA) models enable robots to predict actions directly from observations and language instructions, but their performance depends on large-scale, high-quality data and is limited by the scarcity of real-world robot action datasets. To facilitate VLA model learning with abundant unlabeled human videos, Latent Action Models (LAM) learn latent action representations from visual dynamics to provide additional supervision for VLA learning. However, LAM and VLA are typically trained separately, leaving LAM ungrounded during VLA training and VLA models constrained by frozen LAM representations. To address these issues, we propose Latent Action Representation Alignment (LARA), a plug-and-play framework that jointly optimizes LAM and VLA via representation alignment. This enables reciprocal benefits where LAMs learn with action trajectories to avoid spurious visual changes, while VLAs are regularized by forward dynamics learned within LAMs to reduce hallucinations of functionally ineffective trajectories. We demonstrate LARA versatility and effectiveness for pre-training, post-training enhancement of pre-trained VLA models, and LAM refinement, achieving an average of ~10%, ~5%, and ~15% improvement over 3 simulation and 1 meticulously designed real-world robotic manipulation benchmarks.

Vision-language-action (VLA) models have advanced rapidly across backbones, training recipes, and data scale, yet the action decoder, which converts the backbone's hidden state into a continuous control signal, has barely changed and remains a single-point predictor across the majority of current VLAs. Whether implemented via autoregressive token bins, L1 regression, or flow-matching denoising, the resulting decoder treats the action space as unstructured, leaving the geometric proximity of neighboring actions unexploited during training. To advance this, we introduce ActionMap, a voxel heatmap action head that drops into an existing VLA in place of its native action decoder. For each new action, the head predicts a voxel heatmap over the action space, where each voxel directly stores the probability of the corresponding action. Across LIBERO simulation and real-world Franka manipulation, our heatmap head surpasses two architecturally distinct backbones at matched training steps (e.g., +8.2% over OpenVLA-OFT's L1 regression head on the LIBERO four-suite average), converges at comparable or faster rates on both backbones, and remains markedly more data-efficient at low training data. The cross-backbone consistency indicates that action representation is a real lever for VLA performance, distinct from further backbone or recipe scaling. Project Page: https://showlab.github.io/ActionMap/.

Visuomotor manipulation policies trained via large-scale behavior cloning have achieved strong semantic scene understanding, yet often fail to reliably execute correct low-level actions under distribution shifts. For example, even in a simple pickup task with identical scene layouts, camera viewpoints, and illumination, performance can degrade substantially when the object is placed at unseen locations. We argue that this gap arises from insufficient action understanding, namely the inability to interpret the robot's base-frame action coordinate system in image space. To address this issue, we introduce AxisGuide, a lightweight guidance method that bridges semantic scene understanding and action-coordinate interpretation. Using camera parameters and end-effector poses, AxisGuide renders the robot base-frame axes in each camera view and augments RGB observations with a small set of cue channels that explicitly visualize the meaning of the +x, +y, and +z motions in image space. Extensive evaluations in both the LIBERO simulation and real-world environments demonstrate that AxisGuide yields substantial performance gains and improved generalization, highlighting the effectiveness of explicit action-coordinate cues for learning reliable and transferable generalist visuomotor policies.

Non-prehensile object manipulation skills are important for real-world robot interactions, enabling highly dynamic tasks such as balancing a glass on a tray or the controlled sliding of items on a table. Among such tasks, those characterised by high-speed manipulation requirements and general sensitivity of the resulting hybrid dynamics are particularly hard to accomplish. Within these, juggling can be seen as a highly challenging maneuver to be solved. The key to robotic juggling is achieving dynamic stabilisation of an underactuated object. Since the object does not possess the ability of self-correction, its stability is entirely dependent on the forces applied to it. This creates a system that is sensitive to control inputs, where timing is critical to continuously counteract deviations and maintain the desired behavior. We develop a systematic method to control a 7-degree-of-freedom manipulator performing non-prehensile ball juggling with a tool. Our primary contribution is a model-based framework for generating juggling trajectories and stabilizing a periodic juggling motion for this hybrid system. The framework incorporates a two-stage optimal control approach to compute the underlying feasible motion patterns required for stable juggling. Offline-computed trajectories are then organised to enable real-time error correction without solving optimal control problems online. We demonstrate the effectiveness of the resulting controller by first evaluating its performance in a simulation environment and performing an experiment using a Franka Emika Panda robot.

Human video datasets used for cotraining robot manipulation policies largely consist of curated demonstrations where motions are orchestrated to resemble robot behavior and 3D hand poses are captured with specialized hardware. A more plentiful source of data is everyday Internet video, but it is an open question what factors enable transfer from such videos to robots. We investigate this using a new dataset of 532 human videos with 28 hours of high-quality triangulated hand labels and natural motions. We find that hand pose quality affects transfer, but even with accurate hands, the inherent motion gap hinders transfer unless the vision and policy networks specialize to each embodiment. Our cotraining recipe yields consistent improvements, with an absolute success rate gain of $29.7\%$ in the low-robot-data regime across six manipulation tasks.

Robot manipulation of physical puzzles is important for automatic assembly and disassembly tasks. However, to enable robots to solve physical puzzles, manipulation skills need to be learned, which requires large training datasets, the generation of which is often time consuming and tedious. To overcome this problem, we propose the Physical Robot Manipulation Puzzle Generation framework (PhyRoGen), which leverages procedural content generation (PCG) for automated generation of synthetic datasets of manipulation puzzles. PhyRoGen is a general-purpose puzzle generator, which can generate physical puzzles with interlocking object dependencies, where one articulated object must be manipulated before another can be moved. Based upon PhyRoGen, we define six concrete generators which we use to generate 24 physical puzzles. By using a benchmarking framework, we are able to solve all puzzles in 1 to 300 seconds using sampling-based planning algorithms. Finally, we demonstrate that every generated puzzle is manipulatable by using a KUKA LBR iiwa robot in a physical simulation. This shows that our framework is able to procedurally generate unique, solvable robot manipulation puzzles, which is a crucial ingredient to benchmark manipulation algorithms and to develop robust foundation models.

Vision-Language-Action (VLA) policies remain brittle in long-horizon control, where one-pass action decoding offers limited inference-time deliberation. Explicit chain-of-thought adds reasoning depth but incurs token-generation latency and an indirect text-to-action interface. We propose MPCoT, a reward-guided multi-path latent reasoning framework with configurable depth K and width M. MPCoT initializes M latent hypotheses, refines them for K weight-tied steps, and softly aggregates them before action decoding. A training-only path-preference objective combines expert-trajectory consistency, frozen Qwen3-VL progress scores, and endpoint-consistency feedback to supervise the path scorer. Under matched protocols on LIBERO and CALVIN, MPCoT improves long-horizon performance; ablations support the contributions of depth, width, soft aggregation, and reward supervision. On five real-world ALOHA Mini bimanual tasks, average success increases from 71.3% to 82.0% over the matched OpenVLA-OFT baseline. These results support latent deliberation as a means of improving execution while preserving the action interface and generating no reasoning tokens.

Egocentric human video offers a scalable alternative to robot data for pretraining, yet models pretrained on such video consistently underperform those pretrained on robot data. We attribute this gap to a missing signal, the active perception behavior in egocentric videos, where humans continuously reposition their viewpoint during manipulation, inducing camera motion that standard pipelines treat as noise. To address this, we present ActiveMimic, a pretraining framework that recovers synchronized camera and wrist trajectories from a single body-worn RGB camera, models camera motion as a viewpoint action, and jointly learns active perception and manipulation from in-the-wild egocentric human video before adapting to a target robot. Empirically, real-world experiments across tasks with diverse active perception demands show that ActiveMimic consistently surpasses baselines pretrained on human video and matches state-of-the-art models pretrained on robot data. Further analysis provides evidence that active perception capability originates from egocentric human video pretraining rather than robot-specific fine-tuning, confirming active perception as the key to unlocking egocentric human video for robot pretraining.

Vision-Language-Action (VLA) models leverage the rich world knowledge of pretrained vision-language models (VLMs) to enable instruction-following robotic manipulation. However, the structural mismatch between VLM semantic spaces and embodied control policies often hinders the learning of precise perception-action mappings. To address this challenge, we propose AffordanceVLA, a scalable, unified framework that introduces structured affordance learning as a task-oriented and object-centric intermediate representation to establish a more precise and robust perception-action mapping. Specifically, we progressively model manipulation priors through three complementary components - Which2Act, Where2Act, and How2Act - which jointly produce spatially grounded, semantically conditioned, and action-coupled intermediate representations, thereby naturally bridging vision, language, and action. We integrate these modules into a Mixture-of-Transformer (MoT) architecture and adopt a three-stage progressive training curriculum that leverages 8.8M affordance-centric grounding and pointing samples, translating scalable vision-language supervision into improved robotic manipulation. To overcome the scarcity of dense affordance labels in robotic datasets, we also develop a robust automated data augmentation pipeline. Extensive experiments on ID & OOD simulation and real-world demonstrate that AffordanceVLA outperforms strong VLA baselines across diverse manipulation scenarios, validating structured affordance learning as a scalable and robust bridge that integrates multi-source vision-language supervision while connecting pretrained VLM semantics to embodied robot control.

Intra-vehicular robots in spacecraft help reduce astronaut workload and improve mission efficiency. Recent research focuses on using deep learning methods to achieve the acute control required for operations in these complex environments. However, objects exhibit unpredictable, unconstrained drift without gravitational damping. These factors demand robustness against complex multimodal action distributions. Diffusion policies (DP) can model these complex actions, but their iterative sampling process consumes too much energy for the limited power budgets of spacecraft. We therefore propose a low-energy intra-vehicular robotic manipulation framework, L-SDPPO, in which the Spiking Diffusion Policy (SDP) is optimized with a reinforcement learning (RL) algorithm. Furthermore, to address the insufficient perception of dynamic spatiotemporal features in microgravity, we propose the statedependent latency injection (SDLI) mechanism, which mimics biological neural delays to dynamically regulate the timing of input information. Evaluation on five representative intra-vehicular daily tasks (e.g., hatch opening and precision container capping) shows that our method consistently achieves higher success rates and lower energy consumption, compared to the state-of-the-art robotic manipulation methods. These results demonstrate our method is a viable intra-vehicular robotic manipulation method.

As robotic systems become more sophisticated, the growing complexity of their motion planning models and the longer training times pose substantial challenges. Evolutionary algorithms such as the Sample-efficient Cross-Entropy Method (iCEM) have recently demonstrated promising potential for low-level real-time planning by leveraging efficient knowledge reuse strategies to improve performance. Although effective in many control tasks, iCEM's performance can be constrained in more complex scenarios, particularly those requiring stacking, sliding, and shelf placement. In this work, we propose a novel iCEM+TL framework that explicitly leverages Transfer Learning (TL), where key iCEM parameters are transferred from simpler upstream tasks to guide more complex downstream tasks. Additionally, we applied Reward Redesign (RR) through task decomposition for stacking objects and shelf placement to optimize task-specific performance. Results from the simulation show that our framework achieves success rate improvements of up to 23%. The framework is further validated on a real Franka Emika robot in a stacking task, demonstrating its practical feasibility for real-world deployment.

One-step generation from standard diffusion or Flow-Matching training is rarely effective for text-to-image or video generation without distillation or specialized one-step objectives. We find that VLA action generation behaves strikingly differently. Biasing only the training timestep distribution toward the noise endpoint yields strong one-step policies across LIBERO, LIBERO-Plus, LIBERO-Pro, and real-world robot tasks. Moreover, for open-source VLA models with different architectures, simply replacing iterative decoding with a single forward pass often performs comparably to the original multi-step decoding on benchmarks such as LIBERO, CALVIN, and SimplerEnv. We attribute this difference to the condition-target structure of VLA generation, which is closer to image-to-text than text-to-image: rich observations strongly constrain a comparatively compact target. We formalize this intuition through the irreducible velocity loss $R_v(t,c)$ of standard Flow Matching, which becomes much smaller toward the noise endpoint for VLA, whereas image-generation models usually exhibit a U-shaped profile. The geometry induced by the learned generative map shows the same contrast: the Jacobian of this map with respect to the initial noise has a substantially smaller largest singular value for action generation than for image generation. Together, these results suggest that VLA's condition-target structure makes one-step generation unusually accessible to standard Flow Matching. Code and training configurations for this paper are available at https://github.com/bondtesty/let-it-be-simple.

In humanoid motion control, model predictive control (MPC) offers physically grounded prediction and constraint handling, while reinforcement learning (RL) enables robust whole-body skills through large-scale simulation. However, using MPC inside RL often requires time-consuming problem construction or excessive training overhead, making such frameworks difficult to justify in practice. This work studies efficient training-time MPC guidance for humanoid locomotion and manipulation, termed MPC-RL. We introduce a centroidal-dynamics MPC reward formulation that leverages guidance from MPC trajectories in training time. To make this practical in massively parallel RL, we develop $π^n$MPC, a parallel-in-horizon and construction-free batched GPU MPC solver that operates directly on time-varying dynamics to avoid high memory usage and pre-compilation. Through a variety of comparative studies and hardware validations, we have found that MPC-RL achieves superior performance in locomotion and manipulation skills. The code base is available at https://github.com/junhengl/mpc-rl.

Embodied AI systems are increasingly expected to reason and act over extended horizons in physical environments. This growing capability brings safety to the foreground, because failures in the physical world can harm people, damage objects, and disrupt workplaces. Although safe embodied AI has attracted substantial attention, the literature remains fragmented across planning, policy design, and runtime execution. Long-horizon robotic manipulation is a particularly revealing anchor domain for this problem because semantic misgrounding, subtask-level error propagation, execution drift, and contact-rich physical risk can accumulate within the same closed-loop system. This survey therefore provides a structured review of safety in long-horizon robotic manipulation from an embodied AI perspective. We organize the literature by intervention locus, covering planning-time, policy-time, and execution-time safety, and we analyze the strength of the evidence that each line of work provides, distinguishing formal guarantees, statistical support, and empirical safety heuristics. This framework clarifies the distinct roles of backbone capability papers, direct safety mechanisms, and benchmark or evaluation studies, while exposing where current safety claims are well supported and where they remain indirect. We identify persistent gaps, including limited evidence for policy-time safety, weak formal support for contact-rich long-horizon manipulation, immature uncertainty-triggered intervention, and a shortage of manipulation-specific safety benchmarks. We conclude by outlining research directions for cross-layer assurance, evaluation design, and safer deployment of long-horizon robotic agents in real-world settings.

We dream of AI agents that can read arbitrary designs and construct real-world objects from reusable building blocks. As a first step toward this vision, we study whether multimodal large language models (MLLMs) possess the visual grounding and spatial reasoning capabilities required for brick assembly. We formulate brick assembly as a sequential decision-making problem, where each step involves two subtasks: brick selection, identifying the target brick from candidate components, and brick pose estimation, predicting where and how the selected brick should be placed. To support this study, we introduce BC-Bench (Brick Construction Benchmark), the first benchmark for evaluating MLLMs on assembly with diverse bricks. Experiments show that current state-of-the-art MLLMs remain far from reliable builders, struggling with fine-grained brick selection and failing at precise pose estimation. To bridge this gap, we propose Brick-Composer, a learning framework that equips MLLMs with assembly skills through three complementary signals: Human Design Sparks, which provide affordance-rich construction demonstrations; World Feedback, which grounds predicted actions in visual and physical consequences; and Synthetic Experience, which scales learning beyond existing object designs. Brick-Composer improves brick selection accuracy by over three times, substantially reduces pose estimation errors, and raises strict step-level assembly success from less than 1% to around 15%. After training, a Qwen-3-8B can correctly compose up to 42% of the steps for a complete object, suggesting that MLLMs can acquire assembly capabilities through targeted, physically grounded learning.

World-action models (WAMs) jointly generate future video and robot actions through iterative diffusion, achieving strong performance on manipulation benchmarks but requiring tens of denoising steps, a cost that precludes real-time control. Step distillation has emerged as the natural remedy, but off-the-shelf methods break down in the joint video-action setting because video and action streams use different SNR-shifted noise schedules and reach training with substantially different marginal noise distributions, an asymmetry that single-modality distillation methods cannot accommodate. We introduce Flash-WAM, a modality-aware step-distillation framework inspired by consistency distillation that selects the consistency function for each modality to match its noise regime: a linear-gradient-scaling parametrization for the action stream's low-noise regime, paired with a variance-preserving parametrization for the video stream's high-noise regime, grounded in a structural analysis of the consistency-function family that characterizes the achievable gradient scaling under the consistency boundary condition. Instantiated on LingBot-VA, Flash-WAM compresses inference to a single step in each modality. On RoboTwin 2.0, this reduces per-chunk latency from $8.1$ seconds to $348$ ms on NVIDIA L40S, a $23{\times}$ speedup that enables real-time inference. Flash-WAM preserves task success on simulation benchmarks ($85.5\%$ RoboTwin 2.0, $95.7\%$ LIBERO) and substantially recovers real-world performance ($60\%$ average on a Unitree G1 humanoid robot), while naive consistency distillation drops to $24\%$ at the same step budget.

Despite the importance of tactile sensing for reliable manipulation, most existing Vision-Language-Action (VLA) datasets remain vision-only, and those that do incorporate tactile information typically lack the joint combination of task diversity, language conditioning, and action trajectories. Furthermore, existing teleoperation pipelines rarely provide haptic feedback to the operator, despite its established role in demonstration quality and manipulation stability. In this work, we present HapTile, a contact-grounded visuotactile manipulation dataset that advances beyond vision-only trajectory datasets by embedding physical interaction sensing at two levels: fingertip tactile feedback at the robot end-effector, and haptic-informed demonstrations at the teleoperator side. The data collection platform integrates haptic feedback directly into the teleoperation controller, enabling the operator to perceive contact interactions in real time. It is built around a standard and reproducible robotic system equipped with custom-designed fingertip tactile sensors. The dataset comprises everyday manipulation tasks spanning a broad range of contact-rich skills, including pick-and-place, folding, pressing, stacking, and other routine activities. Each task is paired with language instructions that condition the policy on the manipulation objective, together with synchronized visuotactile observations and action trajectories. In addition, we provide a benchmarking study on contact-rich policy learning using two baseline models to evaluate the effectiveness of the proposed contact-grounded dataset. The dataset and additional details are available on our website: haptile-dataset.github.io.

Video generation models have made impressive strides in synthesizing visually compelling content, yet their outputs remain confined to the virtual domain. A natural question follows: how well do these models reflect the physical world when their generated videos leave the screen and enter reality? We propose robotic manipulation as a concrete, measurable window onto this question: if a model has truly internalized physical laws, the motion it depicts should translate into executable robot behavior. We introduce Dream$.$exe, an evaluation framework that operationalizes this criterion through a video-to-execution pipeline. Given a scene image and a task description, Dream$.$exe synthesizes a manipulation video, converts the generated motion into robot trajectories, and executes them in a physics simulator, yielding a grounding signal that purely visual metrics cannot offer. Using this pipeline, we evaluate 8 models spanning frontier closed-source generators, open-source generators, and robot-specific models. Our benchmark covers 101 manually curated manipulation tasks at three levels of physical complexity, measured across visual quality, trajectory fidelity, and execution success. Encouragingly, several models achieve measurable execution success, suggesting that generative priors learned from internet-scale data already encode meaningful physical knowledge. Yet visual quality proves a poor predictor of executability, exposing a dimension of model capability that standard visual evaluations do not capture. Dream$.$exe will be open-sourced at https://github.com/showlab/Dream.exe.

Inverting a robotic task requires more than reversing symbolic state transitions or rewinding motor trajectories. In robot manipulation tasks, symbolic inverse plans often fail to fully restore the effects of forward executions under continuous interaction dynamics. We present a hybrid framework for inverse manipulation that derives inverse-skill objectives from STRIPS-like operators automatically extracted from demonstrations through soft geometric predicates. For each extracted operator, we construct an inverse restoration objective that preserves preconditions, restores delete effects, and negates add effects. A task planner first attempts to satisfy this objective using available action primitives. Unresolved symbolic predicates then induce a residual operator learning problem solved through Reinforcement Learning (RL). We evaluate the framework on the ManiSkill3 PushCube task. For a forward pushing skill, the symbolic inverse performs a coarse pick-and-place restoration, while a residual Soft Actor-Critic policy refines the cube pose to satisfy the remaining inverse predicates. Our results show that predicate-derived residual control can turn an approximate symbolic inverse into a physically grounded inverse skill.

Universal Manipulation Interface (UMI) enables scalable real-world robot data collection without hardware-specific teleoperation, yet leveraging UMI data to train large-scale Vision-Language-Action (VLA) models remains fundamentally challenging. We identify two critical mismatches: wrist-mounted fisheye views, with severe radial distortion and local gripper-centric perspectives, are out-of-distribution for pretrained VLMs; and human-collected trajectories frequently violate kinematic limits, incur collisions, or exceed controller bandwidth, teaching VLA policies physically infeasible actions. To address the challenges, we present VISTA, a framework that bridges this dual gap through three synergistic components. (i)~UMI-VQA, the first large-scale VQA dataset tailored to wrist-mounted fisheye observations, aligns VLM representations to the distorted visual regime via auxiliary vision-language supervision. (ii)~A systematic physical-validation pipeline performs a data-completeness pre-check and scores each valid trajectory for trajectory continuity, self-collision risk, and execution fidelity before it enters training. (iii)~A two-stage co-training recipe jointly learns vision-language grounding on UMI-VQA and action prediction on validated trajectories. Our experiments empirically show that incorporating UMI-VQA consistently improves downstream policy performance, and that physical-validation scores are strongly predictive of deployment success. On diverse simulation and real-world manipulation tasks, VISTA significantly outperforms strong baselines including $π_{0.5}$, LingBot-VLA, and Wall-X. We release the physical-validation pipeline, UMI-VQA, validated trajectory data, and the pre-trained model for the community.

We propose a 3D-thinking-guided co-training framework that enables vision-language-action (VLA) models to perform 3D spatial reasoning implicitly during action prediction. Our core insight is that 3D geometry perception and 3D spatial reasoning are distinct capabilities that can be disentangled and injected at different feature hierarchies. During training, three tightly coupled components work in concert primarily within the latent space: (1) To gain geometric priors, a latent 3D geometry perception module aligns intermediate visual features with a 3D foundation model, acquiring low-level geometric cues without architectural modifications to the VLM backbone. (2) Complementing this, an online 3D reasoning distillation module mitigates the prompt-induced reasoning gap via a shared reasoning anchor token. During 3D VLM co-training, this anchor is emitted as the first output token to robustly encode spatial priors. During VLA training, it serves as an input token inserted between the task and action instructions, transferring high-level spatial thinking from explicit teacher reasoning prompts to student action prompts without chain-of-thought text generation. (3) These disentangled geometric and reasoning features are then united by a spatially augmented action integration, which jointly injects them into the action-query tokens as hierarchical spatial conditions to prevent action shortcuts. At deployment, our method retains only its lightweight adapters to perform implicit 3D reasoning, discarding the 3D foundation model and the teacher branch used for supervision. Consequently, it operates purely on 2D images without 3D sensors, external models, or explicit text generation while preventing catastrophic forgetting of the pretrained VLM, achieving state-of-the-art performance on LIBERO, LIBERO-PLUS, SimplerEnv, and real-world manipulation tasks.

Robotic arms capable of traversing arbitrary spatial paths, especially in highly obstructed workspaces, are highly desired across several industries. Quaternion-joints have recently empowered a specific class of robotic arms -- cable-driven redundant manipulators -- beyond its prior capabilities. Specifically, quaternion-joints reduce the number of required motors per degree of freedom, paving the way for more compact solutions.An ongoing challenge is that the complexity of the kinematic model of quaternion joints challenges a priori decisions on manipulator configurations and imposes higher computational demands on the control system and its non-linearities amplify all discrepancies between design and physical artifact arising from fabrication imprecision. Here we show a that a 4-segment, 8-joint manipulator can achieve a broader workspace than extant configurations, at lower hardware cost, and that Residual Reinforcement Learning outperforms extant state-of-the-art methods -- specifically, the FABRIK algorithm -- on the control of such manipulator. Our results show that this configuration is more workspace-effective than prior designs, and that Residual Reinforcement Learning outperforms FABRIK by three orders of magnitude on positional and orientational accuracy, effecting precise control of the novel 4-segment, 8-joint manipulator. Additionally, the control implementation is simpler: we describe the complete FABRIK process for control and corresponding learning implementation. Our methodology is applicable to the design of new systems, providing designers with further tools for the development of this class of manipulators and corresponding control systems for novel configurations.