Sep 22, 2026 · cs.ROJ/K move · Enter open · S save
Hang Yang, Tingcong Liu, Junjie Xiong, Fangju Yang+1
Deterministic dynamics modeling of tendon-driven continuum robots remains challenging owing to uncertainties in material behavior, tendon transmission, friction, and contact. Measured joint configurations and nominal tendon commands do not fully characterize these internal mechanical factors, leaving uncertainty in the subsequent motion. We therefore develop a history-conditioned, physics-informed flow-matching framework for probabilistic dynamics prediction, using motion and actuation histories to predict the distribution of the next complete joint configuration. By recursively sampling next-step configurations under prescribed commands, the model predicts distributions of future whole-body motions. In simulation, scenario-specific models achieve five-second trajectory Energy Scores (lower is better) of 12.05 mm under internal friction variation and 9.29 mm under unobserved actuation disturbances. Relative to the conditional variational autoencoder and diffusion baselines, Flow attains lower Energy Scores and coverage closer to the nominal level in both scenarios. Ablations support history and structural conditioning in both scenarios. On the physical robot, predictions under two tendon-command profiles excluded from training capture the principal motion sequences, with five-second Energy Scores of 11.91 and 11.42 mm, lower than the compared baselines. The predicted-to-measured spread ratios are 1.65 and 1.22 (closer to 1 is better). These results support history-conditioned probabilistic dynamics prediction under incomplete mechanical observations.