Trajectory Prediction

Adaptive torque prediction in dynamic exoskeleton scenarios requires expensive motion capture systems, which are infeasible in complex outdoor environments. Trajectory prediction has emerged as one of the effective approaches to address such an issue. However, the core challenges of exoskeleton trajectory prediction are twofold: establishing the mapping from multi-modal features to trajectory information; constructing the mapping from trajectory to torque. For the former, most existing methods perform only single-step prediction and neglect inter-subject trajectory variability, thereby limiting the trajectory optimization space and prediction generalization. To address this, this paper proposes a fast flow matching method that enables accurate trajectory prediction and better generalization for real-time performance, where trajectory generation errors and encoded observations are used to guide the training direction. For the second challenge, due to the high dynamics of the human-robot system and the strong coupling between perception and control, simple control methods struggle to achieve efficient assistance based on the predicted trajectory. This paper utilizes model predictive control and designs a novel optimization objective to optimize torque, ensuring the exoskeleton achieves comfortable and robust assistance. By integrating the above two components, the unified policy, denoted as ExoTraj, is developed to enable adaptive assistance in complex outdoor scenarios without high data acquisition cost. Experimental results show that compared to traditional methods, ExoTraj reduces cross-subject prediction error by 14.0% during the online phase and maintains robustness against external noise. Relative to the zero torque condition, ExoTraj decreases metabolic rate by 11.5-24.4%, heart rate by 1.7-19.5%, and peak muscle activation levels by 10.9-41.3%, respectively.

Vessel trajectory prediction is important for intelligent shipping, maritime surveillance, and navigation safety. However, existing public maritime AIS resources are often limited by inconsistent forecasting protocols, uneven data quality, and the lack of benchmark-ready contextual annotations, which hinder fair comparison and context-aware modeling. To address this gap, we present EnvShip-Bench, a unified benchmark for short-term vessel trajectory prediction built from large-scale raw AIS data from the Danish Maritime Authority (DMA) and NOAA through a common processing pipeline. EnvShip-Bench adopts a standardized forecasting protocol with 10 minutes of observation, 10 minutes of prediction, and 20-second sampling in vessel-centric local metric coordinates. Beyond the large-scale core benchmark, it provides a quality-first compact subset for efficient and reproducible experimentation, together with synchronized environmental and nearby-vessel context extensions. As a result, EnvShip-Bench supports trajectory-only, environment-aware, and interaction-aware forecasting under a unified evaluation framework. Extensive benchmark statistics and analysis demonstrate that EnvShip-Bench offers a standardized, extensible, and context-aware foundation for maritime trajectory forecasting research.

Maritime situational awareness often relies on Automatic Identification System (AIS) transmissions to track vessel movements. However, in operational or conflict scenarios, these data may be unavailable due to signal loss, deliberate deactivation, or intentional spoofing. In such conditions, synthetic aperture radar (SAR) imagery becomes a critical sensing alternative for wide-area maritime monitoring, despite providing only static scene snapshots. This work introduces HARBOR (Heading Analysis and Reconstruction from Behavioral Observation and Radar), a complete pipeline for transforming a single SAR image into predictive motion information without requiring any auxiliary data source at inference time. The method begins with SAR image preprocessing to enhance and segment vessel candidates, followed by automatic detection, size-based classification, and heading estimation using skeleton geometry and local intensity patterns. AIS data are used exclusively during an offline calibration phase to derive vessel-type-dependent motion parameters, which are then applied to generate probabilistic heatmaps of candidate future vessel positions. A case study using real COSMO-SkyMed SAR imagery demonstrates the pipeline on a maritime scene in southern Brazil, showing its ability to extract motion tendencies and generate probabilistic projections of vessel positions in data-denied environments.

World models that capture how actions induce physical change enable scalable robot learning without reliance on embodiment-specific action labels. Pixel-space video models provide broad visual priors but expend model capacity on dense appearance reconstruction, while direct action models require embodiment-specific labels that hinder scalability. We present $μ_0$, a scalable world model based on 3D traces. Rather than predicting dense pixels or directly modeling actions, $μ_0$ forecasts smooth 3D trajectories for salient interaction points such as objects, tools, hands, and contact regions, yielding a compact, embodiment-agnostic motion interface. To enable training from diverse video sources, our TraceExtract system automatically extracts 3D supervision by selecting keypoints, constructing globally aligned traces, and associating motion segments with hierarchical language captions. This TraceExtract supervision pretrains $μ_0$ by combining a pretrained vision-language backbone with a modular trace expert, which represents each query via B-spline control points and predicts future traces. Experiments show that $μ_0$ outperforms baselines in both 2D and 3D trace prediction, including trace prediction models and tokenized VLM methods. Because $μ_0$ is frozen and reusable, it can be paired with action experts for downstream robot embodiments. Despite action-free pretraining, the resulting trace-conditioned policies achieve performance competitive with VLA models pretrained with action supervision, such as $π_0$. These results establish 3D traces as a scalable and transferable representation for cross-embodiment manipulation.

Robotic table tennis is a representative benchmark for high-speed, closed-loop robotic control in dynamic environments, where accurate and fast prediction of ball states is critical for reliable planning and control. Physics-based approaches rely heavily on accurate parameter identification and precise initial state, while learning-based methods often struggle to capture long-range temporal dependencies and are typically trained on limited or simulated data. We propose a transformer-based framework for table tennis ball state prediction that leverages attention mechanisms to model long-range temporal correlations directly from historical observations, without relying on explicit flight or bounce models. To support robust learning and generalization, we collected a large-scale real-world dataset from players of varying skill levels and diverse ball cannon configurations. The combination of a high-capacity transformer architecture and extensive real-world data enables accurate long-horizon forecasting. Building on this capability, we introduce a plug-and-play sim-to-real transfer strategy, Swap Predictor at Deployment (SPAD), which replaces the physics-based simulator used during training with the proposed real-world-trained predictor at deployment, improving the sim-to-real transferability of the policy without requiring retraining. We demonstrate that this simple substitution effectively narrows the sim-to-real gap while preserving the efficiency and scalability of simulation-based training.

Airport surface operations increasingly constrain performance at high-throughput hubs. This study examines arrival taxi-in decisions at Hartsfield-Jackson Atlanta International Airport (KATL) and proposes a two-stage, data-driven decision aid that mirrors controller workflow. Stage I predicts the runway exit selected by an arriving aircraft. Stage II predicts whether, given that exit, the aircraft will cross the active departure runway at a designated point or use the end-around taxiway. Models are trained using ASDE-X surface trajectories, aircraft characteristics, ramp destinations, short-horizon traffic rates, and weather across multiple look-back windows. We benchmark nine classifiers, including Random Forest, XGBoost, LightGBM, and CatBoost, and evaluate accuracy, macro-F1, precision-recall behavior, confusion matrices, Brier score, and Expected Calibration Error. Across east and west flows, XGBoost and LightGBM outperform Random Forest. Stage I achieves 0.86-0.89 accuracy with macro-F1 scores of 0.40-0.50, while Stage II achieves 0.70-0.74 accuracy with macro-F1 scores of 0.28-0.55. Feature-importance analysis shows that approach speed is the main driver of exit choice. Departure rate, crossing rate, ramp destination, and, for west flow, the selected exit are the strongest predictors of crossing versus end-around routing. Minority classes remain harder to predict because of feature-space overlap, as shown by t-SNE and UMAP analyses. The proposed framework supports controller situational awareness through calibrated, explainable predictions while preserving human responsibility for final routing decisions.

Long-horizon maritime trajectory prediction is important for shipping management, logistics planning, and maritime risk analysis, yet month-level forecasting remains insufficiently studied. Existing deep learning methods mainly focus on short- and mid-term coordinate extrapolation and often struggle to preserve route feasibility and destination correctness over extended horizons. This paper investigates joint long-horizon vessel trajectory and destination forecasting with reasoning-capable large language models, and develops a Maritime LLM post-training framework based on Reinforcement Learning with Verifiable Reward (RLVR). An AIS-based benchmark is constructed with 60-day historical trajectories and 30-day forecasting horizons, where trajectories are converted into semantic textual representations for RL prompt construction. RLVR aligns LLMs with maritime forecasting objectives by enforcing physical validity, providing early-weighted trajectory supervision, and evaluating destination correctness through hierarchical matching and curriculum learning. Experimental results show that RLVR-trained LLMs substantially improve over zero-shot LLMs and representative deep learning baselines, especially on destination-related metrics. Among the evaluated RLVR-trained variants, 4B LLMs achieve the best overall performance, suggesting that reward-compatible optimization and task-specific capacity matching are more important than simply using larger 8B or 14B LLMs. The results also show that LSTM remains a strong deep learning baseline under limited fine-tuning data, while Transformer-style spatio-temporal models typically require larger datasets and richer structured inputs. Overall, this work advances semantic, verifier-aligned maritime forecasting for operational decision support.

Predicting a user's next Point-of-Interest (POI) based on their historical check-in records is a fundamental task in location-based services. While recent methods incorporating large language models have shown strong reasoning capabilities and promising results, they typically formulate the prediction task as a one-step trajectory-to-location mapping problem, making predictions prone to shallow trajectory correlations and historical frequency bias. We argue that users rarely choose locations directly and instead, they usually first form a traveling intention and then accordingly select specific POIs. Motivated by this insight, we propose IntentPOI, a two-stage intention-guided reasoning framework. In the thinking stage, we infer users' intermediate intentions by incorporating historical mobility patterns, similar peer behaviors, and the temporal contexts. In the acting stage, we first construct a compact candidate pool, and then perform intention-guided reasoning to identify locations that best align with the inferred intention. By explicitly decoupling intention inference from location prediction, IntentPOI transforms the next POI prediction from direct trajectory matching into intention-guided reasoning. Extensive experiments on three real-world datasets demonstrate that IntentPOI consistently outperforms eleven state-of-the-art baselines.

Vessel trajectory prediction from Automatic Identification System (AIS) data is essential for maritime situational awareness, yet it remains challenging due to irregular sampling, missing reports, and complex dynamics. Beyond accurate point forecasts, maritime applications also demand well-calibrated uncertainty estimates for reliable decision-making. Bayesian Neural Ordinary Differential Equations (ODEs) offer a principled framework for continuous-time trajectory modeling with uncertainty quantification by placing a prior over the neural vector field parameters. However, the commonly used isotropic Gaussian weight prior fails to encode informative structural properties of vessel dynamics, such as smoothness and locality. Existing function-space Bayesian neural network methods address this limitation for static mappings, but do not transfer directly to Neural ODEs, where the primary quantity of interest is the trajectory rather than the vector field itself. In principle, one could place a Gaussian process (GP) prior directly over ODE solutions, but this requires propagating distributions through a nonlinear ODE solver, which is analytically intractable. To address this challenge, we adopt a practical approach that imposes a GP-kernel-based prior directly on the vector field evaluated at a finite set of measurement points. Specifically, we augment the standard weight-space variational objective with a kernel-based regularizer that penalizes deviations of the vector field from the structure implied by a GP prior. To handle long and irregular AIS trajectories, we further combine this function-space regularization with probabilistic multiple shooting, which decouples inference across temporal segments while maintaining global consistency.

Accurate vessel trajectory prediction is essential for safe and efficient maritime operations, enabling collision avoidance and supporting route optimization. Although memory-augmented neural networks have recently shown strong performance in pedestrian and road-vehicle trajectory prediction by selectively retrieving relevant information from an external memory, their potential for vessel trajectory prediction remains underexplored. This paper presents an empirical investigation of memory-based trajectory prediction using Automatic Identification System (AIS) data. Experiments on data from the Gulf of Mexico and the New York Bight demonstrate consistent and substantial performance gains over a range of deep learning baselines that do not incorporate an external memory.

Individual-level mobility prediction is central to urban simulation, transportation planning, and policy analysis. Supervised sequence models achieve strong accuracy but require task-specific training and offer limited decision-level transparency. Recent LLM-based methods improve interpretability, yet mostly rely on static prompts and single-pass inference, limiting their ability to seek additional evidence when mobility signals are weak or conflicting. We propose \method{}, a training-free LLM-driven agent framework that formulates next-location prediction as adaptive evidence-controlled decision making. \method{} resolves routine cases through a fast path based on historical regularity, while ambiguous cases trigger iterative tool use over recent trajectories, historical behavior, stay-move likelihood, and geographical evidence. Across three mobility datasets, AgentMob achieves the strongest overall performance among training-free LLM-based methods, with GPT-5.4 reaching 71.42% Acc@1 on BW, 33.14% on YJMob100K, and 33.50% on Shanghai ISP. On BW non-fast-path cases, the LLM controller improves Acc@1 from 30.65% to 48.62% over a same-tool statistical baseline, showing that its main benefit lies in resolving ambiguous predictions through adaptive evidence gathering. Our code is available at https://github.com/Unknown-zoo/AgentMob.

Accurate and reliable vehicle trajectory prediction is essential for safe autonomous driving. Recent studies have incorporated safety risk into trajectory prediction to quantify dangers posed by surrounding agents. However, most risk-aware approaches use past risk information as a secondary signal to help guide decisions, overlooking its future evolution and uncertainty. In this paper, we propose a risk horizon profiling (RHP) module that incorporates a continuous, learnable potential field model for risk-aware trajectory prediction. The RHP module calculates the spatial-temporal proximity of surrounding objects to profile risk distributions across future horizons, which supports better trajectory prediction by adaptively identifying what human drivers perceive as critical moments. We evaluate our method on two datasets from different driving settings, highD for highway corridors and SHRP2 for urban streets, which cover diverse risk scenarios including safe, near-crash, and crash events. Compared to the baseline methods, our framework achieves a 25.0% reduction in 5s RMSE on the highD dataset and a 29.1% reduction in 5s minFDE on SHRP2. These results indicate strong performance for both short and long horizon prediction and robust generalization across highway and urban scenarios. The proposed method enables more realistic AV path planning and strategic selection, thereby supporting safer autonomous driving and more advanced driver-assistance systems. The source code for this work is available at: https://github.com/bilab-nyu/RHP

Accurate pedestrian trajectory prediction is essential for safe navigation in autonomous driving and intelligent transportation systems. Despite substantial progress made by recent methods, most existing approaches are limited in fully exploiting diverse observations and often overlook the scale dependency of future motion, treating multiscale features uniformly regardless of underlying motion dynamics. This limits their robustness across diverse pedestrian behaviors. To address these challenges, we propose a Predicted-MUltiSCale-Aware Network (MUSCLE-NET) for Pedestrian Trajectory Forecasting that integrates complementary multimodal cues with scale-adaptive prediction mechanisms. The proposed framework is built upon a Multiscale Multimodal Feature Extraction (MMFE) module, which combines multiscale representation, modality-aware recalibration, and directional cross-modal fusion to construct semantically aligned representations from bounding boxes, velocities, and pose information. Building on these features, a Multiscale Enhanced Hierarchical Prediction (MEHP) module performs prediction-aware future-motion refinement via a probabilistic coarse predictor, scale-aligned fusion, and progressive refinement, adaptively selecting scale-relevant cues to mitigate spatial drift. Extensive experiments on the JAAD and PIE benchmarks demonstrate that the proposed MUSCLE-Net achieves competitive performance and consistent gains compared with state-of-the-art trajectory prediction methods.

Floating-material transport is influenced by unresolved processes that are often absent from available circulation products. We develop a data-driven transport-learning framework for learning effective transport corrections from limited Lagrangian observations using physically motivated ocean--atmosphere diagnostics and finite-memory representations motivated in part by inertial-particle memory effects. The diagnostic representation is analyzed through predictive and sparse symbolic-discovery approaches under leave-one-trajectory-out validation. Applications to Sargassum-following drifters in the Puerto Rico region and the Gulf Stream show that the diagnostics contain transport-relevant information beyond the baseline circulation products. Multilayer perceptron (MLP) ensembles provide flexible predictive trajectory corrections, while Sparse Identification of Nonlinear Dynamics (SINDy) tests whether instantaneous or delayed sparse symbolic transport structure can be extracted from the diagnostics. The results differ across flow regimes: (i) in Puerto Rico, delayed sparse symbolic corrections provide modest but systematic improvement; (ii) in the Gulf Stream application, dynamically useful sparse symbolic corrections remain primarily instantaneous even though delayed predictive information persists. These results support finite-memory transport effects in coarse-grained floating-material transport while also illustrating the difficulty of obtaining stable delayed sparse symbolic closures.

Trajectory prediction is a fundamental task for autonomous systems, requiring complex reasoning about multi-agent interactions and intents. Large language models (LLMs) have recently been adopted for this task, as they provide strong contextual reasoning and interpretable, language-based trajectory representations. However, these LLM-based predictors are extremely memory- and compute-intensive, making them difficult to deploy on resource-constrained edge devices such as on-board computers in autonomous robots. To bridge this gap, we propose BitTP, which converts an LLM-based trajectory predictor into a lightweight bitlinear architecture. We demonstrate that weight-only quantization to 1.58-bit (BitTP-Weight) is optimal. Crucially, activations must remain in full precision, as quantizing them leads to severe degradation and instability in spatio-temporal reasoning. Empirically, BitTP-Weight not only preserves but improves prediction quality over the full-precision (BF16) LLM baseline, reducing ADE by 14.29% and FDE by 20.97% on average, while simultaneously reducing memory usage and inference latency relative to other quantization methods. These results demonstrate that carefully designed quantization acts as an effective regularizer, enabling the practical deployment of sophisticated LLM-based reasoning on edge devices. Code is available at: https://github.com/MintCat98/BitTP.

Maritime intelligent transportation systems (MITS) are essential for ensuring navigation safety and efficiency in busy waterways. However, accurate vessel trajectory prediction remains challenging due to the limitations of single-source data. Automatic identification system (AIS) data is often sparse or unavailable for small vessels, while closed-circuit television (CCTV) data alone cannot fully capture dynamic vessel behavior. To mitigate these challenges, we propose a cross-modal interaction-based vessel trajectory prediction (named CmIVTP) framework to model the intricate interactions between vessel dynamics and environmental constraints. Specifically, we introduce a target-aware scene encoder to extract scene semantic features, effectively capturing vessel-environment interactions and enhancing trajectory prediction accuracy. In addition, we propose a cross-modal interaction transformer, which integrates AIS-derived motion features, CCTV-based environmental features, and scene representations. It leverages cross-modal attention mechanisms to simultaneously capture intra-modal semantics and inter-modal interactions, ensuring dynamically consistent and environmentally feasible predictions. Furthermore, we construct a vessel group trajectory bank by clustering historical AIS trajectories into representative motion patterns, providing an efficient and scalable approach for candidate trajectory generation. Additionally, we introduce the maritime multimodal dataset plus (named Maritime-MmD$^+$), a large-scale dataset that synchronizes AIS data and CCTV video data, providing robust support for multimodal trajectory prediction research. Extensive experiments demonstrate that CmIVTP achieves better performance on multimodal-driven vessel trajectory prediction benchmarks. The code resources for this work can be available at https://github.com/LouisYxLu/CmIVTP.

Recent vision-language-action (VLA) models and world action models (WAMs) advance robotic manipulation by enriching intermediate representations with auxiliary spatial features or future visual-state prediction. However, these representations largely remain within the observation space and do not share the rigid-body geometry of the action space, forcing the action decoder to implicitly recover this geometry. We propose OASIS, a visuomotor policy that aligns the intermediate representation with the action space via $SE(3)$ end-effector trajectory prediction. OASIS couples a 3D-aware feature encoder that fuses vision-language and metric-depth features with an $SE(3)$ trajectory predictor that produces a camera-frame end-effector trajectory. Conditioned on the predictor's pose-supervised hidden states, the action decoder generates action chunks consistent with rigid-body motion. Across simulation and real-world experiments, OASIS outperforms VLA and WAM baselines in success rate and out-of-distribution generalization. Our project page is available at https://npuhandsome.github.io/OASIS_web.

Trajectory prediction methods have demonstrated remarkable capabilities in capturing complex motion patterns. However, existing methods rely on global state assumptions, suffer from insufficient belief inference under partial observability, and lack cognitive behavioral constraints in prediction. These limitations severely compromise both deployment feasibility and physical plausibility in real-world settings. In this work, we propose FEP-Diff, an agent-centric trajectory prediction framework grounded in the Free Energy Principle, aimed at achieving cognitively plausible predictions under realistic constraints. Specifically, a dual-branch spatiotemporal encoder extracts ego-motion dynamics and social interaction cues from local observations. Building upon this, a goal-conditioned belief learner infers multimodal latent belief distributions optimized via a free-energy objective, with a social consistency constraint on the local neighborhood graph to promote cognitive alignment among neighboring agents. Finally, a residual diffusion trajectory generator is conditioned on the learned belief representations with token-level proxy conditioning, producing precise and diverse future predictions. Extensive experiments on five public benchmarks demonstrate that FEP-Diff consistently outperforms state-of-the-art methods under restricted observability. Code: https://anonymous.4open.science/r/FEP-Diff-8876.

Pedestrian intention and trajectory prediction are critical for the safe deployment of autonomous driving systems, directly influencing navigation decisions in complex traffic environments. Recent advances in large vision-language models offer a powerful new paradigm for these tasks by combining high-capacity visual understanding with flexible natural language reasoning. In this work, we introduce PedestrianQA, a large-scale video-based dataset that formulates pedestrian intention and trajectory prediction as question-answering tasks augmented with structured rationales. PedestrianQA expresses richly annotated pedestrian sequences, in natural language, enabling VLMs to learn from visual dynamics, contextual cues, and interactions among traffic agents while generating concise explanations of their predictions without needing specialized architectures tailored for each task. Empirical evaluations across PIE, JAAD, TITAN, and IDD-PeD show that finetuning state-of-the-art VLMs on PedestrianQA significantly improves intention classification, trajectory forecasting accuracy, and the quality of explanatory rationales, demonstrating the strong potential of VLMs as a unified and explainable framework for safety-critical pedestrian behavior modeling.

Predicting how a dynamical unit evolves over time - how an individual ages, an epidemic spreads, or a physical system degrades - typically requires dense longitudinal tracking. When only extremely sparse or entirely cross-sectional data is available, inferring individualized, continuous-time trajectories is fundamentally ill-posed. Existing methods force a strict compromise: sequence models (e.g. latent ODEs) require dense longitudinal data, while cross-sectional methods (e.g. optimal transport, flow matching-based) map aggregate populations, losing individual dynamics. In this paper, we demonstrate that this dichotomy can be broken. We introduce CADENCE, a principled probabilistic framework that recovers continuous individual trajectories from isolated snapshots by anchoring latent dynamics to static, individual-level contexts. We provide novel identifiability guarantees for single-timepoint trajectory inference. By combining a score-based spatial encoder (bijective Probability Flow ODE) to eliminate diffeomorphic ambiguities with a Soft Mixture-of-Experts (SMoE) router, we show that individual dynamical parameters and routing function are jointly identifiable. Across a suite of benchmarks spanning physical systems to real-world biological data, CADENCE, trained strictly on extremely sparse snapshots with context structure, matches or exceeds the performance of state-of-the-art sequential models trained on dense, full-trajectory data.

Predicting how a person's first-person view will evolve (what action will follow, what plan completes a task, whether an in-progress shot will score) is fundamentally under-specified: the same context admits many plausible futures, and a model trained to minimize prediction error is forced to hedge or average across them, getting it wrong either way. Two findings shape our approach. First, the future camera trajectory, the path the head carves through space, lets the model commit to one of those futures: it carries the operator's intent in a form fine enough to determine how an action will unfold, substantially outperforming language as a conditioning signal. Second, this same intent makes the trajectory itself partially predictable from the context at hand, enough that trajectory need not be observed at test time to recover most of the gain. We instantiate these findings as TrajPilot, a model that predicts candidate future trajectories from egocentric context and uses them to pilot action prediction in an action-aligned embedding space where language shapes the structure but is never used as a conditioning input. TrajPilot beats VLM and structured-planner baselines on procedural planning across Ego-Exo4D atomic, Ego-Exo4D Keystep, Ego4D GoalStep, and EgoPER, with the trajectory advantage widening with horizon (exactly where prior planners collapse) and holding under RGB-only camera-pose estimation. With the goal masked at inference, the same model performs goal-free anticipation, beating VLM baselines on Ego-Exo4D atomic and extending to EPIC-Kitchens-100 and basketball shot-outcome prediction.

Language instructions offer a flexible way to specify task semantics but can become ambiguous in cluttered scenes containing multiple visually similar objects and candidate targets. We study Spatially Prompted Visual Trajectory Prediction (SP-VTP), an open-loop setting in which points or bounding boxes in the first egocentric frame specify an object--target pair and condition the prediction of future 3D end-effector (EE) trajectory chunks. To support this setting, we introduce EgoSPT, a controlled dataset comprising 2,841 egocentric fork pick-and-place episodes with first-frame object and target annotations and reconstructed 3D EE trajectories. SP-VTP evaluates whether a static task specification remains informative as the viewpoint and scene configuration evolve throughout execution. We also introduce SPOT, a spatially prompted object--target trajectory predictor that integrates first-frame visual and coordinate prompts with current visual observations and motion history to generate future trajectories. Rather than relying on an explicit object tracker, SPOT maintains a fixed representation of the first-frame task specification. Across three training seeds, spatial prompting consistently reduces translation and endpoint errors relative to a no-prompt baseline, while controlled prompt interventions reveal distinct roles for object and target cues at different stages of execution. Together, EgoSPT and SPOT provide a dataset and baseline for spatially conditioned egocentric trajectory prediction in open-loop pick-and-place settings.

The rapid growth of autonomous driving datasets has enabled the scaling of powerful motion forecasting models. While large-scale pretraining provides strong performance, the standard imitation objective may not fully capture the complex nuances of human driving preferences. Meanwhile, recent advances in vision-language models (VLMs) have demonstrated impressive reasoning and commonsense understanding. Building on these capabilities, this paper presents VL-DPO, a vision-language-guided framework that aligns ego-vehicle motion forecasting models with human preferences. Our approach leverages a VLM as a zero-shot reasoner to automatically generate preference pairs from a pretrained model's rollouts, which are then used to finetune the model via Direct Preference Optimization (DPO). We finetune our models on the Waymo Open End-to-End Driving Dataset (WOD-E2E) and evaluate performance against held-out human preference annotations using rater feedback score (RFS) and average displacement error (ADE). Our experiments confirm that the VLM's trajectory selection is a high-quality proxy for human preference. Our final model, VL-DPO, yields an 11.94% increase in RFS and a 10.01% reduction in ADE over the pretrained model.

Accurately forecasting human trajectories from an egocentric perspective plays a central role in applications such as humanoid robotics, wearable sensing systems, and assistive navigation. However, progress in this direction remains limited due to the scarcity of egocentric trajectory datasets collected in real-world environments. Addressing this need, we introduce EgoTraj, an egocentric multimodal open dataset recorded using Meta Quest Pro (MQPro). EgoTraj contains 75 sequences of human navigation collected from multiple MQPro wearers in real-world urban environments. Each recording provides synchronized RGB video along with ground-truth data, including continuous time-synchronized 6-degree-of-freedom head poses, per-frame 3D eye gaze vectors, scene annotations. To the best of our knowledge, EgoTraj differs from typical egocentric trajectory datasets by capturing long-horizon, self-directed navigation across diverse urban routes with broad participant diversity. To demonstrate the potential of the dataset, we benchmark several state-of-the-art methods for egocentric trajectory prediction and conduct ablation studies to analyze the contributions of gaze, scene, and motion cues. The results highlight the utility of EgoTraj for AR-based perception, navigation, and assistive systems. The EgoTraj dataset, code, and EgoViz Dashboard are publicly available at https://github.com/yehiahmad/EgoTraj.

Understanding customer movement within retail spaces is essential for optimizing store layouts. Real-world trajectory data can provide highly accurate insights, but collecting it is costly and often infeasible for many retailers. Heuristics such as Travelling Salesman Problem (TSP) and Probabilistic Nearest Neighbours (PNN) are commonly used as inexpensive approximations, but actual customer trajectories deviate by an average of 28% from shortest paths, highlighting a tradeoff between accuracy and practicality. We propose an agent-based modelling framework that casts customer trajectory prediction as a maximum entropy reinforcement learning (RL) problem, balancing reward maximization with stochasticity to better reflect customers with bounded rationality. Using real-world trajectory data from a convenience store, we show that RL-generated trajectories align more closely with customer behaviour than TSP and PNN, providing more accurate estimates of impulse purchase rates and shelf traffic densities. Furthermore, only RL-based predictions yield repositioning decisions for impulse products that align with those derived from actual trajectory data, resulting in comparable estimated profit gains. Our work demonstrates that RL provides a practical, behaviourally grounded alternative that bridges the gap between oversimplified heuristics and data-intensive approaches, making accurate layout optimization more accessible. To encourage further research, the source code is available on GitHub.

Accurate pedestrian trajectory prediction is crucial for autonomous systems operating in complex environments, such as modular buses and delivery robots in suburban or semi-structured areas. Social Spatio-Temporal Graph Convolutional Neural Networks (Social-STGCNN) have shown strong performance by modeling social interactions; however, producing diverse and well-calibrated future trajectories remains challenging. In this work, we build on a Social-STGCNN backbone and introduce a Conditional Variational Autoencoder (CVAE)-based probabilistic formulation to explicitly model multimodal future trajectories. We evaluate the method on the ETH and UCY pedestrian trajectory datasets as well as on a real-world pedestrian dataset collected by a mobile robot. Results show moderate gains on public benchmarks, but more consistent endpoint accuracy and improved trajectory diversity across different crowd configurations. Evaluation on robot-collected data further demonstrates the approach's effectiveness beyond curated benchmarks and supports its applicability in practical deployments.

Accurate multi-step port-of-call sequence prediction is vital for tactical resource orchestration and logistical efficiency. However, existing methods struggle with unreliable voyage schedules and the inability of AIS data to provide visibility beyond the immediate next port. To address this, this study proposes a Connectivity-Constrained and Retrieval-Enhanced (CCRE) deep learning framework. Inspired by Retrieval-Augmented Generation, CCRE introduces a retrieval-enhanced historical encoder that queries a global maritime database for contextually similar navigational precedents. Transforming these scenarios into candidate-level semantic representations compensates for data sparsity in long-tail routes and resolves routing ambiguities. Integrating this with a Transformer-based trajectory encoder, the architecture executes adaptive "middle fusion" via cross-attention. This dynamically shifts predictive reliance from real-time kinematics for short-term accuracy to historical context for long-term strategic stability. To ensure sequence-level coherence, forecasting is formulated as a joint sequence generation problem using an autoregressive Transformer decoder enriched with Scheduled Sampling and Gumbel-Softmax relaxation. This mitigates error accumulation, while topology masks strictly enforce maritime network reachability to eliminate operationally infeasible routes. Evaluated on a global dataset, CCRE achieves a 72.3% first-destination accuracy and a 61.4% average three-step accuracy, outperforming baselines like CatBoost and LSTM by average margins of 12.6% and 11.3%, respectively. Case studies further corroborate the model's scalability and ability to capture complex routing patterns across diverse international trade lanes.

Long-horizon vessel trajectory forecasting under real ocean conditions is critical for collision avoidance, traffic management, and route planning. However, achieving accurate predictions is challenging due to long-range temporal dependencies and dynamic environmental factors such as currents, wind, and waves. To address these issues, we propose a hierarchical two-stage framework that combines a coarse long-term predictor with a grid-aware short-term predictor through a hierarchical fusion mechanism. The short-term branch leverages a Spatio-Temporal Graph Transformer on discretized maritime cells to capture localized dynamics, while the long-term branch encodes overarching navigational intent. An integrated environmental module incorporates oceanographic parameters, including surface currents, wind vectors, and significant wave height, using cross-modal attention and feature-wise modulation for adaptive response to varying sea conditions. Additionally, a learnable Savitzky-Golay smoothing layer enhances temporal coherence in fused trajectories. We evaluate our approach on Australian Craft Tracking System (CTS) data from the North West region, aligned with Copernicus Marine Service products, using a 3-hour input and a 10-hour prediction horizon. Experimental results show that our framework outperforms the state-of-the-art by 25% in Average Displacement Error (ADE) and 17% in Final Displacement Error (FDE). Ablation studies further validate the contribution of each component.

Human trajectory forecasting is crucial for safe navigation in crowded environments, requiring models that balance accuracy with computational efficiency. Efficiently modeling social interactions is key to performance in dense crowds. Yet, most recent methods rely on attention mechanisms, which are effective at capturing complex dependencies, but incur quadratic computational costs that scale poorly with the growing number of neighbors. Recently, Selective State-Space Models have provided a linear-time alternative; however, their inherently sequential design is misaligned with the unstructured and dynamic nature of social interactions. To address this challenge, we propose Social-Mamba, a forecasting architecture that reformulates social interactions as structured sequential processes. At its core is the Cycle Mamba block, a novel module that enables continuous bidirectional information flow. Social-Mamba organizes agents on an egocentric grid and introduces social triplet factorization, which decomposes interactions into temporal, egocentric, and goal-centric scans. These are dynamically integrated through a learnable social gate and global scan to generate accurate and efficient trajectory predictions. Extensive experiments on five trajectory forecasting benchmarks show that Social-Mamba achieves state-of-the-art accuracy while offering superior parameter efficiency and computational scalability. Furthermore, embedding Social-Mamba into a flow-matching framework further enhances both accuracy and efficiency, establishing it as a flexible and robust foundation for future trajectory forecasting research. The code is publicly available: https://github.com/vita-epfl/Social-Mamba

Forecasting within signal processing pipelines is crucial for mitigating delays, particularly in predicting the dynamic movements of objects such as NBA players. This task poses significant challenges due to the inherently interactive and unpredictable nature of sports, where abrupt changes in velocity and direction are prevalent. Traditional approaches, including (S)ARIMA(X), Kalman filters (KF), and Particle filters (PF), often struggle to model the non-linear dynamics present in such scenarios. Machine learning (ML) methods, such as long short-term memory (LSTM) networks, graph neural networks (GNNs), and Transformers, offer greater flexibility and accuracy but frequently fail to explicitly capture the interplay between temporal dependencies and contextual interactions, which are critical in chaotic sports environments. In this paper, we evaluate these models and assess their strengths and weaknesses. Experimental results reveal key performance trade-offs across input history length, generalizability, and the ability to incorporate contextual information. ML-based methods demonstrated substantial improvements over linear models across forecast horizons of up to 2s. Among the tested architectures, our hybrid LSTM augmented with contextual information achieved the lowest final displacement error (FDE) of 1.51m, outperforming temporal convolutional neural network (TCNN), graph attention network (GAT), and Transformers, while also requiring less data and training time compared to GAT and Transformers. Our findings indicate that no single architecture excels across all metrics, emphasizing the need for task-specific considerations in trajectory prediction for fast-paced, dynamic environments such as NBA gameplay.