Robust Manipulation

Multi-finger dexterous manipulation relies on stable hand-object interactions, yet these interactions are partially observable in practice. Visual observations are often occluded by the hand, tactile sensors introduce hardware-specific modalities and calibration burdens, and existing policies rarely model how these cues evolve under actions, making them brittle under contact uncertainty. To address these, we present ProxiDex, a dynamics-guided proximity policy framework that treats hand-object proximity as an interaction state for dexterous manipulation. ProxiDex reconstructs interaction point clouds and converts geometric distances into proximity cues, forming a hardware-agnostic contact representation that provides immersive feedback during VR teleoperation. Built on this representation, ProxiDex learns action-conditioned proximity dynamics with a coupled forward-inverse design: future observation latents are predicted from actions, while proximity variations are decoded from latent changes. Leveraging these dynamics, ProxiDex adaptively reweights proximity tokens across manipulation phases and uses dynamics-consistency supervision to guide policy inference, stabilizing action generation under unreliable visual feedback. Simulation and real-world experiments demonstrate improved success rates and robustness over representative baselines across standard, unseen objects, and perturbation scenarios. Additional visualizations are available at https://proxidex.github.io/.

Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.

Diffusion policies have shown strong performance in learning complex, multi-modal behaviors for robotic manipulation. However, their application to contact-rich disassembly tasks remains limited by a key trade-off: the iterative denoising process introduces inference latencies that makes high frequency control difficult, which is essential for realizing dynamic interactions such as chiseling and prying. Recent action-chunking techniques mitigate latency but use an open-loop execution window, rendering the system blind to rapid force transients caused by fracture events. To bridge this gap, we introduce the Diffusion Policy Augmented by Fast Trajectory Generation (DPA-FTG). Compared to recent visual-tactile approaches that focus on positional correction, DPA-FTG decouples low-frequency planning from high-frequency force regulation. At the high level ($5$ Hz), a conditional diffusion model predicts a sequence of latent parameters for selecting a strategy from a learned vocabulary of task primitives. At the low level ($60$ Hz), a lightweight, force-conditioned policy acts as a neural impedance controller, modulating execution in real-time to maintain contact stability. We validate our approach on a bimanual battery disassembly task involving the separation of a compliant sheet. Experimental evaluation demonstrates that DPA-FTG outperforms state-of-the-art baselines, including Reactive Diffusion Policy (RDP).

World Action Models (WAMs) have emerged as a promising paradigm by jointly modeling robot actions and future visual dynamics. However, their reliance on pixel-generative future supervision can entangle action-relevant state transitions with task-irrelevant visual content, limiting robustness under visual distribution shifts. We identify Training-Distribution Hallucination, a recurring phenomenon in which futures conditioned on visually shifted observations hallucinate training-domain content rather than remain faithful to the current scene. A controlled frame-triplet diagnosis further shows that DINOv3 features remain more stable across visual shifts while better preserving task-state distinctions than Wan-VAE latents. Rather than correcting the predicted futures, we propose Semantic-Temporal WAM (ST-WAM) to improve action robustness by using DINOv3 as a shared semantic representation for future prediction and history retrieval while retaining fine-grained VAE dynamics. Its Dual-Space Future Experts (DSFE) jointly predict future VAE latents and DINO features, while Current-Anchored Intent Retrieval (CAIR) retrieves task-relevant evidence from recent DINO history under the current visual-language context. ST-WAM is trained end-to-end without additional embodied pretraining or task-specific annotations, and requires no explicit future generation at inference. It achieves 98.7% on LIBERO and 92.8% on RoboTwin 2.0; more importantly, compared with Fast-WAM, it improves zero-shot LIBERO-Plus performance by 21.3 percentage points and more than doubles real-world success under visual shifts from 25.8% to 61.5%. These results demonstrate that semantic-temporal modeling effectively complements pixel-generative dynamics for robust manipulation.

Non-prehensile manipulation enables flexible material handling with part carriers, but friction-based support makes high-speed motions failure-prone, while slower operation increases cycle time. Proactive failure prediction is therefore essential for efficient and reliable performance, yet existing approaches remain limited by key constraints, including sensitivity to dynamic actions and high dependence on known policy structures. Furthermore, existing methods and datasets lack a precise characterization of the latest intervention time, leaving it unclear whether a detected failure can still be prevented through timely intervention. In this paper, we investigate lift-and-place tasks for non-prehensile material handling manipulation and propose a more effective approach to predicting precursors to failures (PREFAIL) by analyzing the relative motion of target objects with respect to the carrier. We further introduce a dataset that precisely identifies the latest intervention time for risky manipulations, enabling rigorous evaluation of whether a failure prediction is actionable. We validate our approach on both simulation and real-world datasets. Our experimental results demonstrate that PREFAIL substantially improves both the accuracy and timeliness of responses to failure precursors.

Precision industrial contact manipulation requires reliable robot policies under pose perturbations and contact-force constraints. Vision-language-action models offer broad generalization but often introduce high inference latency and GPU-memory cost, while vision-action chunking policies are more suitable for real-time industrial control. However, these policies are usually trained by behavior cloning and suffer from distribution shift in contact-rich tasks. This paper proposes PAC-ACT, a reinforcement-learning post-training framework for pretrained Action Chunking Transformer policies. PAC-ACT reformulates policy optimization at the chunk level, constructs an ACT-transferred actor-critic architecture, and introduces a hybrid behavior-prior constraint to preserve the pretrained action distribution during online fine-tuning. Experiments on industrial precision-contact benchmarks show that PAC-ACT improves task success, contact stability, and force safety while retaining low latency and low GPU-memory usage. On the Contour task, PAC-ACT significantly reduces peak contact force and decreases the proportion of force readings above 60 N by 46 times. Sparse-reward ablations further show that the proposed behavior-prior constraint enables effective exploration under randomized initial poses.

Tactile feedback is fundamental to Hand-Object Interaction (HOI), governing contact formation, force regulation, and stable manipulation, making it essential for achieving true human-like dexterous manipulation. Yet, current human-to-robot dexterous transfer pipelines primarily rely on kinematic trajectories, resulting in motion imitation without physically grounded interaction. To address this, we introduce TactiDex, a real-world tactile-guided benchmark specifically designed to move dexterous manipulation beyond kinematic mimicry toward contact-level human-likeness. TactiDex provides a comprehensive dataset that elegantly aligns whole-hand tactile signals with multi-granularity kinematic and object states, coupled with standardized evaluation metrics. Building upon this data paradigm, we propose a tactile-driven transfer framework that effectively translates human demonstrations into physically plausible robotic execution. We introduce TactiSkill, a framework built upon a novel tri-component tactile reward that innovatively uses tactile signals as structured supervision. This reward unifies guidance, human-like alignment, and contact constraints into a single objective. Through comprehensive experiments on both single and bimanual tasks, we demonstrate that TactiSkill achieves superior performance in manipulation success and physical realism. This work lays a crucial foundation for advancing tactile-aware dexterous manipulation. Our project page at https://tactidex.github.io/.

Aerial robots are increasingly moving from remote observation toward physical interaction with objects, surfaces, structures, loads, and surrounding flows. This review argues that aerial manipulation cannot be understood as classical manipulation simply mounted on a flying base. Because flying agents remain aloft through continuous momentum and energy exchange with the surrounding medium, support, locomotion, stabilization, and task-directed interaction are intrinsically coupled. Building on broad views of manipulation as intentional environmental regulation through physical interaction, we propose a medium-aware interpretation of aerial manipulation in which interaction may be mediated by contact, by the surrounding fluid, or by both. The review organizes biological and robotic examples into a repertoire of interaction modes and a capability ladder, then develops an actuation-geometric viewpoint in which redundancy induces task-equivalent fibers. Internal motion along these fibers can trade energy for active readiness, aerodynamic promptness, and passive medium coupling. This perspective clarifies why aerial manipulation is difficult, why biological flyers remain broader than robotic systems, and how future platforms may command forces while also shaping how the medium acts back on them.

Learning motion latents for robotic manipulation heavily relies on extracting motion patterns from visual sequences, yet effective action abstractions require understanding three-dimensional geometric transformations. Here, we introduce GeoMoLa (Geometry-Aware Motion Latents), which learns discrete motion latent codes by predicting how point clouds evolve during manipulation rather than reconstructing visual observations. This four-dimensional objective -- spatial geometry changing through time -- forces latent representations to encode actual physical motion rather than appearance patterns. GeoMoLa achieves state-of-the-art performance using only single-view RGB-D input, while existing methods require multi-view reconstruction, succeeding across diverse manipulation benchmarks. Our ablations reveal that geometric prediction is the key to driving performance, quantitatively validating that manipulation depends on spatial understanding. Furthermore, the learned codes exhibit effective motion abstraction: applying them to novel scenes produces physically consistent transformations regardless of visual context. Our real-world experiments also confirm this robustness capability, achieving robust manipulation with minimal demonstrations in cluttered environments where geometric reasoning determines success. Thus, we demonstrate that effective motion latents for robot control can better emerge from understanding motion through its three-dimensional effects rather than pixel-level patterns.

Humans and animals exhibit remarkable robustness in physical manipulation, yet robots remain far behind. Progress toward human-level manipulation robustness is hindered by the absence of a unified and systematic understanding: different subfields frame robustness in distinct ways, often leaving the concept ambiguous and limiting deeper analysis as well as communication across research areas. This paper presents a systematic study of manipulation robustness. We begin with a formal definition, characterizing robustness as the degree to which a manipulation system can achieve its goal in the presence of uncertainty and variation. Building on this definition, we introduce general formulations of manipulation robustness from probabilistic and control-theoretic perspectives. We then synthesize the guiding principles and concrete mechanisms of manipulation robustness across perception, planning, control, policy learning, and hardware, illustrating each mechanism through representative works, including foundational and recent studies. In addition, we revisit existing metrics and evaluation methods for quantifying manipulation robustness. Finally, we distill broader lessons for designing robust manipulation systems and discuss open problems and future directions toward achieving human-level robustness in robotic manipulation.

Non-prehensile manipulation is often used as a preparatory step for robotic grasping, yet existing approaches typically require a predefined target object pose. In practice, however, objects admit multiple graspable configurations and the desired pose is not known in advance. We reformulate non-prehensile manipulation for grasping as optimizing an object centric graspability objective rather than reaching a specific pose. We construct a graspable set from synthesized grasps and define a graspability field that measures how suitable an object configuration is for successful grasp execution. The scalar measure provides a dense learning signal for reinforcement learning and determines when to terminate manipulation. This yields a closed-loop manipulation-to-grasp pipeline driven by a single policy. Experiments in simulation and on a real robot show that the policy reliably reconfigures objects into graspable states and transitions to grasping without external planners or manually specified stopping conditions. The predicted graspability distance correlates with real world grasp success, which indicates that the learned representation captures grasp feasibility of object configurations.

Most imitation learning methods assume full observability in table-top settings. In practice, objects are often occluded, requiring robots to both search and act, and learning this coupled behavior from limited demonstrations remains challenging. We propose See2Act, an imitation learning approach that conditions action prediction on a sequence of actively-inferred viewpoints at test time, by coupling action denoising with viewpoint refinement. The policy is trained using camera poses anchored to keyframe actions from offline demonstrations, enabling implicit learning of where to see, while learning how to act. We empirically demonstrate that in Ravens the policy recovers informative viewpoints under severe occlusions, and on RLBench tasks it improves performance by up to 34% over prior methods. In the real world, we collect 50 demonstrations in a digital twin and achieve zero-shot sim-to-real transfer on pick-and-place tasks using depth observations. The policy handles significant occlusions, showing that learned viewpoint reasoning enables robust manipulation under partial observability.

Dual-arm manipulation can improve throughput via parallel execution, but collecting bimanual demonstrations for training is costly and difficult. We present ExS2D, a hierarchical action expansion framework that enables dual-arm manipulation from single-arm supervision. ExS2D first generates structured subtasks from textual instructions while explicitly capturing temporal precedence. It then grounds each subtask into executable actions through subtask-guided action mapping in observation. Finally, precedence-aware action allocation and synchronized planning are performed by a multimodal large language model driven coordinator to select collision-free dual-arm executions. Simulation experiments demonstrate that ExS2D reduces the average execution steps by 54.4% while maintaining a comparable success rate to a single-arm baseline. Real-robot experiments on four tasks further demonstrate the reliability of ExS2D for dual-arm execution under few-shot single-arm samples, while using zero bimanual demonstrations.

Intelligent robots should not only recover from failures, but also acquire the abstract knowledge needed to avoid them in the future. While reinforcement learning (RL) can learn reactive recovery behaviors, training a separate policy for every distinct failure mode is highly inefficient. We introduce Recovery-Driven Synthesis of Relational Concepts (ReSYNC), the first approach that progressively discovers and refines state abstractions (relational predicates) from failure-recovery experience to support abstract planning. Unlike purely reactive methods, ReSYNC jointly learns skills and concepts through an incremental dual-learning process. In the skill-learning phase, the robot uses RL to learn to recover from failures seen in training tasks. In the concept-learning phase, the robot discovers new relational predicates and refines its abstract planning model to explain and generalize the learned recovery behaviors. This interaction enables ReSYNC to convert local recoveries seen during training into global failure avoidance at test time. Across four simulated domains, we show that ReSYNC's ability to continually expand and refine its abstraction library allows it to solve long-horizon, previously unseen problems, outperforming strong baselines by over 50%. Additionally, we demonstrate sim-to-real transfer of ReSYNC, where it performs real-world non-prehensile manipulation skills and generalizes to unseen scenarios through abstract planning. Overall, ReSYNC represents a significant step toward robots that autonomously acquire abstractions for scalable, failure-aware planning in the physical world.

Recent visual imitation learning systems have widely adopted multi-camera setups with wrist-mounted cameras as the de facto standard. However, manipulation from a single global view remains challenging, as the policy should capture fine-grained interaction details and identify task-relevant regions without local wrist views. To address this challenge, we present Spatially Conditioned Diffusion Policy (SCDP), a diffusion-based visuomotor policy that achieves precise and robust manipulation in a single-camera setting. Our key idea is that end-effector trajectories can serve as visual attention anchors that reflect task-relevant regions. Building on this idea, SCDP consists of two key components: (i) a visual encoder that produces multi-scale feature maps to capture both broader context and fine-grained visual features, and (ii) a spatial conditioning module that samples point-wise features along intermediate end-effector trajectories in the diffusion loop. Extensive simulation experiments show that SCDP consistently outperforms strong single-view baselines and achieves performance comparable to multi-camera baselines. Real-world experiments further demonstrate precise manipulation and robustness to visual distractors, highlighting the potential of single-camera imitation learning.

Robotic manipulation robustness often founders on the physics gap between simplified simulations and the resistance-laden real world. In this work, we emphasize that physical realism in articulated interaction is an important ingredient for robust policy learning. We present Real-IKEA, a dataset and simulation framework designed with physical accuracy as a first-class goal. Real-IKEA provides 1,079 articulated asset configurations, derived from 83 authentic IKEA handles and knobs processed through a meticulous six-step physical workflow. For contact-geometry accuracy, we introduce a bidirectional surface-deviation metric to quantify collision meshes. For dynamics realism, we establish resistance-calibrated configurations that vary damping and friction. Crucially, we demonstrate through a Reinforcement Learning (RL) policy that high-fidelity assets enable the discovery of robust "hooking" and "levering" strategies that prioritize mechanical advantage over fragile friction-pulling. Together, these results position Real-IKEA as a critical benchmark for developing manipulation policies capable of human-level robustness in articulated object tasks.

Manipulation understanding requires reliable relational evidence, such as contact, support, containment, motion coupling, grasp, release, and active-hand involvement. Although these visual predicates are widely used in event-chain, graph-based, and neuro-symbolic models, their reliability under visual degradation is rarely analyzed directly. This paper introduces a predicate-level reliability framework for robust manipulation understanding under blur, occlusion, illumination change, low resolution, frame dropping, and detection noise. The framework defines a structured predicate vocabulary, confidence-aware predicate estimation, and reliability metrics for predicate preservation, degradation sensitivity, temporal consistency, confidence-weighted stability, and downstream impact. Experiments on controlled manipulation videos and public egocentric or bimanual datasets, including VISOR/EPIC-KITCHENS, H2O, and ARCTIC, show that predicate failures are structured rather than uniform. Static spatial predicates remain comparatively robust, whereas contact-sensitive, dynamic, and derived predicates such as grasp and release are more fragile. Under severe degradation, detection noise, occlusion, and frame dropping cause the strongest reliability losses. Downstream analysis shows that degraded predicates reduce manipulation-understanding accuracy from 0.89 to 0.58, while removing confidence weighting under moderate degradation reduces accuracy from 0.74 to 0.64. These results show that predicate reliability provides a diagnostic layer between visual perception and structured manipulation reasoning.

Non-prehensile object manipulation skills are important for real-world robot interactions, enabling highly dynamic tasks such as balancing a glass on a tray or the controlled sliding of items on a table. Among such tasks, those characterised by high-speed manipulation requirements and general sensitivity of the resulting hybrid dynamics are particularly hard to accomplish. Within these, juggling can be seen as a highly challenging maneuver to be solved. The key to robotic juggling is achieving dynamic stabilisation of an underactuated object. Since the object does not possess the ability of self-correction, its stability is entirely dependent on the forces applied to it. This creates a system that is sensitive to control inputs, where timing is critical to continuously counteract deviations and maintain the desired behavior. We develop a systematic method to control a 7-degree-of-freedom manipulator performing non-prehensile ball juggling with a tool. Our primary contribution is a model-based framework for generating juggling trajectories and stabilizing a periodic juggling motion for this hybrid system. The framework incorporates a two-stage optimal control approach to compute the underlying feasible motion patterns required for stable juggling. Offline-computed trajectories are then organised to enable real-time error correction without solving optimal control problems online. We demonstrate the effectiveness of the resulting controller by first evaluating its performance in a simulation environment and performing an experiment using a Franka Emika Panda robot.

In this paper, we address the challenge of performing non-prehensile pushing operations with a compliant robotic manipulation system. To ensure safe operations in human-populated environments, robots must comply with external physical interactions and exhibit passive behavior. To achieve this, we extend a state-of-the-art pushing model to integrate it with impedance-controlled robots. We develop a model predictive control framework built upon this model that enables compliant pushing through optimal modulation of the robot's position/velocity set-point, jointly realizing the required pushing force and contact point adaptation to obtain desired object motion. However, external interactions may induce tracking errors, causing a consequent potentially indefinite increase of the pushing force. To prevent this, we integrate an energy tank passivity filter that further modulates the robot velocity set-point to guarantee passivity and avoid uncontrolled energy buildup. The proposed method has been rigorously tested in simulation and validated through experiments on two different robotic systems, demonstrating passive compliance during human-robot interactions and assessing trajectory tracking performance and robustness to variations in the object's physical parameters.

As end-to-end robotic policies are progressively deployed in the real world to solve real tasks, they face a gap between the training and inference conditions. Scaling the amount and diversity of the training data has shown some success in improving zero-shot generalization, yet robots still fail when faced with new, unseen test conditions. For instance, while robots with fixed frames of reference are common, those with moving frames pose a greater challenge for deployment. To address this specific instance of the issue, we present a study of strategies for encoding the robot's proprioceptive state to improve both in- and out-of-distribution performance at test time. Through a systematic study of joint representations, we find that a simple episode-wise relative frame provides the best trade-off between task performance and robustness, outperforming the baselines in extensive real-robot experiments conducted in a realistic test environment. The results suggest a practical path to leveraging data collected by robots with varying frames of reference and deployment to unseen test configurations.

Dexterous manipulation is physics-intensive and highly sensitive to modeling errors and perception noise, making sim-to-real transfer prohibitively challenging. Domain randomization (DR) is commonly used to improve the robustness of learned policies for such tasks, but conventional DR randomizes one instance per episode, offering very limited exposure to the variability of real-world dynamics. To this end, we propose Domain-Randomized Instance Set (DRIS), which represents and propagates a set of randomized instances simultaneously, providing richer approximation of uncertain dynamics and enabling policies to learn actions that account for multiple possible outcomes. Supported by theoretical analysis, we show that DRIS yields more robust policies and alleviates the need for real-world fine-tuning, even with a modest number of instances (e.g., 10). We demonstrate this on a challenging reactive catching task. Unlike traditional catching setups that use end-effectors designed to mechanically stabilize the object (e.g., curved or enclosing surfaces), our system uses a flat plate that offers no passive stabilization, making the task highly sensitive to noise and requiring rapid reactive motions. The learned policies exhibit strong robustness to uncertainties and achieve reliable zero-shot sim-to-real transfer.

What appears effortless to a human waiter remains a major challenge for robots. Manipulating objects nonprehensilely on a tray is inherently difficult, and the complexity is amplified in dual-arm settings. Such tasks are highly relevant to service robotics in domains such as hotels and hospitality, where robots must transport and reposition diverse objects with precision. We present DART, a novel dual-arm framework that integrates nonlinear Model Predictive Control (MPC) with an optimization-based impedance controller to achieve accurate object motion relative to a dynamically controlled tray. The framework systematically evaluates three complementary strategies for modeling tray-object dynamics as the state transition function within our MPC formulation: (i) a physics-based analytical model, (ii) an online regression based identification model that adapts in real-time, and (iii) a reinforcement learning-based dynamics model that generalizes across object properties. Our pipeline is validated in simulation with objects of varying mass, geometry, and friction coefficients. Extensive evaluations highlight the trade-offs among the three modeling strategies in terms of settling time, steady-state error, control effort, and generalization across objects. To the best of our knowledge, DART constitutes the first framework for non-prehensile dual-arm manipulation of objects on a tray. Project Link: https://dart-icra.github.io/dart/

Non-prehensile manipulation is essential for handling thin, large, or otherwise ungraspable objects in unstructured settings. Prior planning and search-based methods often rely on ad-hoc manual designs or generate physically unrealizable motions by ignoring critical gripper properties, while training-based approaches are data-intensive and struggle to generalize to novel, out-of-distribution tasks. We propose a library-driven hierarchical planner (LDHP) that makes executability a first-class design goal: a top-tier contact-state planner proposes object-pose paths using MoveObject primitives, and a bottom-tier grasp planner synthesizes feasible grasp sequences with AdjustGrasp primitives; feasibility is certified by collision checks and quasi-static mechanics, and contact-sensitive segments are recovered via a bounded dichotomy refinement. This gripper-aware decomposition decouples object motion from grasp realizability, yields a task-agnostic pipeline that transfers across manipulation tasks and geometric variations without re-design, and exposes clean hooks for optional learned priors. Real-robot studies on zero-mobility lifting and slot insertion demonstrate consistent execution and robustness to shape and environment changes.

Training non-prehensile manipulation policies in contact-rich settings is a core challenge in robotics. While Reinforcement Learning (RL) has demonstrated its strength in such settings, it may struggle to sufficiently explore and discover complex manipulation strategies. To address this, we combine two basic ideas: First, designing appropriate reset strategies (the start state distribution of episodes) has shown promise in improving RL exploration and effectiveness. Second, while model-based approaches to finding trajectories through manipulation are hard, recent work showed that model-based approaches to sampling states on constrained manifolds can be highly efficient. Based on these observations, we propose a novel state sampler that boosts the performance of goal-conditioned RL in complex contact-rich manipulation tasks. Our sampler explicitly takes into account the structure of contact in order to provide a rich covering of diverse contact modes. By combining constrained sampling resets with projected interpolation and curriculum learning, our novel approach outperforms RL without constrained sampling and alternative reset methods, and effectively trains universal, non-prehensile, and dynamic manipulation policies in contact-rich settings. See https://www.user.tu-berlin.de/mtoussai/26-CSRL/ for supplementary material.

Non-prehensile manipulation, encompassing ungraspable actions such as pushing, poking, pivoting, and wrapping, remains underexplored due to its contact-rich and analytically intractable nature. We revisit this problem from two perspectives. First, instead of relying on single-arm setups or favorable environmental supports (e.g., walls or edges), we advocate a generalizable dual-arm configuration and establish a suite of Bimanual Non-prehensile Manipulation Primitives (BiNoMaP). Second, departing from prevailing RL-based approaches, we propose a three-stage, RL-free framework for learning structured non-prehensile skills. We begin by extracting bimanual hand motion trajectories from egocentric video demonstrations. Since these coarse trajectories suffer from perceptual noise and morphological discrepancies, we introduce a geometry-aware post-optimization algorithm to refine them into executable manipulation primitives consistent with predefined motion patterns. To enable category-level generalization, the learned primitives are further parameterized by object-relevant geometric attributes, primarily size, allowing adaptation to unseen instances with significant shape variations. Importantly, BiNoMaP supports cross-embodiment transfer: the same primitives can be deployed on two real-world dual-arm platforms with distinct kinematic configurations, without redesigning skill structures. Extensive real-robot experiments across diverse objects and spatial configurations demonstrate the effectiveness, efficiency, and strong generalization capability of our approach.