Millimeter Wave

Accurate user equipment (UE) localization is critical for beam management in reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) based sixth-generation (6G) networks, especially if the direct base-station-UE links are unavailable. This paper proposes a beam-domain fingerprint framework that maps the received signal-to-noise ratio (SNR) across a small set of predefined RIS reflection states to the UE azimuth angle and range, without requiring channel state information (CSI). Crucially, we extend the framework to a realistic interference-impaired scenario in which a nearby cross-link interferer (CLI) corrupts the clean SNR fingerprint, yielding a signal-to-interference-plus-noise ratio (SINR) fingerprint; an interference-to-noise ratio (INR)-constrained calibration strategy keeps the interference level physically interpretable. Four machine-learning (ML) regressors are evaluated under both conditions. Simulation results at 28 GHz with a 20x20 RIS show that k-nearest neighbors (KNN) achieves the lowest angle MAE of 0.37 degrees and range MAE of 4 cm under clean conditions, rising to 1.4 degrees and 7.6 cm under interference. A key finding is that interference degrades angle estimation substantially more than range estimation across all models, a consequence of the asymmetric encoding of location information in the beam-domain fingerprint.

Millimeter-wave human activity recognition suffers significant performance degradation when the user's orientation changes relative to the sensing system, yet collecting labeled multi-orientation data is labor-intensive and costly. To eliminate the need for exhaustive multi-orientation measured data, we develop a physics-guided simulator that synthesizes orientation-diverse wireless training data from single-orientation motion. Specifically, to suppress orientation-induced feature variations, we propose a dual-attention network that extracts activity-discriminative and orientation-robust representations from dual-link Doppler spectrograms. To bridge the simulation-to-reality gap, we introduce an adversarial unsupervised transfer learning mechanism that aligns feature distributions using only a small number of unlabeled target-domain samples. The S2M-Sense platform shows high fidelity in reproducing real-world signatures, validated against 60.48 GHz mmWave measured data with an average structural similarity index measure (SSIM) of 0.84 between simulated and measured Doppler spectrograms across all 4 activities and 4 orientations. Experimental results show that S2M-Sense achieves 88.33% recognition accuracy using only the dual-link multi-orientation simulated dataset, which improves to 95% after simulation-to-reality transfer learning with as few as 16 unlabeled measured samples. Both cases with and without transfer learning outperform state-of-the-art cross-domain sensing methods.

Large language model agents need to perceive human behavior in physical environments. Millimeter-wave (mmWave) radar provides a privacy-friendly and contactless sensing modality, but radar observations are difficult to align with language. Existing radar-language methods often rely on synthetic data or lack explicit supervision for human body structure and motion. We present mmMind, a radar-language model that uses synchronized 3D pose as training-only supervision. A spatio-temporal radar encoder is pretrained to capture body configuration and motion dynamics, after which the pose head is removed so that inference requires radar alone. The learned radar representations are then aligned with an LLM for behavior captioning and spatio-temporal question answering. We also introduce mmMind-Bench, a real-world mmWave-language benchmark containing 17.9 hours of recordings from 23 participants across seven indoor environments. Experiments on captioning, question answering, and unseen-action generalization show that mmMind consistently outperforms existing radar-language baselines, while ablations confirm the importance of pose-guided pretraining.

Fast dynamic obstacle avoidance (DOA) on uncrewed aerial vehicles (UAVs) demands not only low-latency control and actuation but also reliable perception with sufficient sensing range for accurate obstacle detection and speed estimation. This letter presents, to the best of our knowledge, the first mmWave RADAR-based perception-and-control system for fast onboard DOA. We derive and analyze latency and spatial bounds that relate sensing range, relative speed, and control delay, yielding sufficient conditions for successful avoidance. Our system adopts a lightweight tracker based on interacting multiple models and a controller based on control-barrier functions that directly outputs evasive accelerations. It achieves position errors of less than 0.15 m, 0.93 m, and 0.87 m in x, y, and z directions for 300 experiments with three different object sizes and varying visibility (light and dark), and a similar spread for 90 experiments in smoke. An onboard implementation on a Raspberry Pi 4B demonstrates real-time feasibility with an end-to-end sensing-to-command latency of approximately 14 ms. Code and the full dataset of 390 throws are available (https://tinyurl.com/radardoagit).

Sensing ego-velocity estimation is fundamental to state estimation in visually degraded environments, where camera- and LiDAR-based pipelines can become unreliable. Millimetre-wave radar is well suited to these conditions because it provides direct Doppler velocity sensing and remains robust to poor illumination, textureless scenes, and airborne particulates. However, conventional radar ego-velocity pipelines typically apply constant false alarm rate (CFAR) thresholding to convert dense radar spectra into sparse point clouds, prematurely discarding sub-threshold returns that may still retain useful Doppler motion cues. We present Dense Soft Weighting, an analytic radar front-end that maps every range-Doppler cell to a continuous confidence metric rather than enforcing a binary detection threshold. Ego-velocity is then estimated using a deterministic robust weighted least-squares formulation, while the same weighted measurements provide a closed-form, measurement-derived velocity covariance for integration with a shared inertial back-end. The method requires no platform-specific training data or learning-based uncertainty model, supporting transfer across single-chip radar configurations. Across two public datasets and one self-collected dataset, Dense Soft Weighting reduces mean absolute pose error by 31-45% relative to the strongest CFAR point-cloud baseline under an identical inertial back-end, while running in real time on embedded hardware.

Millimeter-wave (mmWave) radar enables privacy-friendly human sensing, but its sparse point clouds are physical measurements of view-dependent electromagnetic reflections and only indirectly characterize body articulation. Recovering a complete 3D pose from such partial, geometry-dependent observations is therefore under-constrained. Existing methods directly regress joint coordinates from paired radar-pose data, relying on the same limited paired supervision to learn radar perception, human-body structure, and their alignment. This coupling can encourage dataset-specific shortcuts under ambiguous radar observations. We propose Wave2Body, a radar-to-body token translation framework that decouples these learning targets using a self-supervised mmWave tokenizer, a pretrained compositional body tokenizer that defines the output space, and a lightweight translator between them. Experiments on M4Human and mmBody show that Wave2Body achieves stronger cross-domain generalization than previous methods while incurring much lower computational costs for training and inference. All the code and experiment results are publicly available at https://github.com/Galaxywalk/Wave2Body.

High-fidelity simulation of mmWave radar signals for dynamic human motion is valuable for developing radar-based human sensing models; yet collecting accurately labeled measurements for a specific deployment site remains expensive. We present HybridSim, a physics-learning hybrid simulator that synthesizes mmWave radar signals from dynamic human meshes under a fixed indoor room configuration, explicitly decoupling propagation into two components. To parameterize the human subject, we use a tri-plane representation to extract human features and a Graph Convolutional Network to stabilize optimization and mitigate gradient instability. The direct signal path is modeled via an inverse-rendering formulation with a microfacet BRDF to capture primary surface reflections. In parallel, the indirect path is approximated by combining 3D Gaussian Splatting with a virtual-receiver geometry to fit and reproduce site-specific multipath interference patterns, achieving substantially lower computational cost than explicit full ray tracing. Experiments in a fixed-room setting show improved agreement with a physically based reference and consistent gains on downstream radar-based human sensing tasks when using HybridSim for site-specific data augmentation.

Robust probabilistic mapping is essential for autonomous robotic systems operating in challenging environments. While traditional sensors fail in adverse conditions such as smoke and fog, millimeter wave (mmWave) radar sensors offer reliable sensing in such conditions. However, creating accurate probabilistic maps from radar data presents significant challenges due to the inherently sparse and noisy characteristics of radio wave measurements and signal processing steps. In an attempt to address these issues, we establish a complete pipeline from raw radar signals to probabilistic occupancy maps, incorporating Synthetic Aperture Radar processing followed by a probabilistic modeling step. We conduct extensive validation across indoor environments, comparing our approach against different signal processing and probabilistic modeling approaches. We also evaluate mapping quality through downstream path planning performance analysis. Furthermore, we investigate the impact of key parameters and antenna array configuration on mapping performance. The experimental results demonstrate both the effectiveness and limitations of SAR-based probabilistic mapping for real-world robotic deployment. To facilitate future research and broader adoption, we contribute an open-source cascaded mmWave radar dataset with an accompanying GPU-accelerated signal processing pipeline available at https://github.com/rpl-cmu/rpm.

Work-related Musculoskeletal Disorders (WMSDs) require continuous ergonomic assessments. While Rapid Entire Body Assessment (REBA) is a gold-standard observation tool, manual monitoring is labor-intensive, and vision-based automation leads to privacy concerns. This paper proposes a novel end-to-end multi-task learning framework for privacy-preserving ergonomic assessment using millimetre-wave (mmWave) radar. A spatio-temporal backbone reconstructs 3D human skeletons, which serves as the biomechanical foundation for a subsequent regression head to generate REBA risk scores. To overcome the sparsity of radar point clouds, we utilise a multi-objective loss function incorporating biomechanical limits and temporal smoothness constraints. Furthermore, we implement an oversampling strategy to address the imbalance of high-risk postures in existing datasets. Experimental results on MMFi dataset demonstrate that our framework achieves a Categorical Accuracy of 77.78% and real-time performance with an inference latency of 5.70 ms. Our method reaches a High-risk REBA MAE of 0.93, which significantly outperforms both direct regression and two-stage pipelines in high-risk scenarios, providing a robust solution for non-invasive industrial ergonomic assessment.

Millimeter-wave (mmWave) beam alignment plays a critical role in next-generation wireless systems, yet its efficient implementation remains challenging. Meta-learning and transfer learning have been explored to enable deep learning-based beam prediction models to rapidly adapt to unseen environments; however, existing meta-learning approaches adapt the entire network and are trained from random initialization, leading to a large number of updated parameters and a high meta-training cost, while transfer learning approaches restrict adaptation to part of the network but do not exploit episodic meta-learning, which explicitly trains the model over multiple tasks, to optimize the adaptation process itself. To overcome these limitations, we propose MTL-BA, a meta-transfer learning framework for beam alignment in millimeter-wave multiple-input single-output (MISO) systems that freezes a pre-trained convolutional backbone and meta-learns only lightweight Scale-and-Shift (SS) adapters together with a classifier head. Warm-starting from the pre-trained model and restricting adaptation to the SS adapters and classifier head reduce both the adaptation cost and the meta-training budget without sacrificing prediction performance. Simulation results on the DeepMIMO ray-tracing dataset show that MTL-BA matches the accuracy and spectral efficiency of full fine-tuning across various SNR levels despite updating approximately $17\times$ fewer parameters than both full fine-tuning and Model-Agnostic Meta-Learning (MAML), outperforms last-layer fine-tuning while updating a comparable number of parameters, and approaches MAML's performance while requiring $60\%$ fewer meta-training epochs.

Home robots require reliable vital signs monitoring to support long-term companionship and safety in daily environments, yet obtaining respiration and heart rate without physical contact remains challenging in unconstrained home settings. Millimeter-wave (mmWave) radar offers a promising solution due to its phase sensitivity to sub-millimeter motions. However, mmWave measurements are fundamentally constrained by observation geometry, since only the radial component of motion is observable. Consequently, arbitrary robot-human orientations often introduce angular misalignment that destabilizes vital signs estimation. To address this limitation, we reformulate vital signs monitoring from passive signal recovery to active geometric regulation. We propose ActiveVital, a vision-guided sensing framework that treats sensing geometry as an explicit control variable for robots. It localizes the chest anchor via visual keypoints and converts alignment errors into control commands. This steers the robot-mounted radar toward near-normal incidence to the thoracic surface, maximizing radial observability within a perception-action loop. A differential phase enhancement module further stabilizes signal extraction under motion. Experiments show that ActiveVital reduces respiration interval error from 0.87 s to 0.14 s and heart rate error from 13.59 bpm to 2.22 bpm, achieving accuracy comparable to controlled static sensing while remaining robust under unconstrained robot-human configurations.

Millimeter-wave (mmWave) networks are highly susceptible to line-of-sight (LoS) blockages. Vision-aided wireless communications (VAWC) enable proactive handovers (PHO) to mitigate such blockages; however, PHO becomes challenging when no nearby base station (BS) is available. In such cases, reconfigurable intelligent surfaces (RIS) can be used to restore connectivity. To ensure timely PHO, the RIS configuration time must be taken into account, as the large number of RIS elements can limit responsiveness in time-sensitive scenarios. This work proposes a novel RIS-assisted PHO approach that optimizes the number of allocated RIS elements to balance signal processing complexity and link quality under handover timing constraints, making the RIS-assisted link more energy-efficient. An optimization problem based on particle swarm optimization (PSO) is formulated to determine the optimal end-to-end RIS link setup that runs offline to bypass latency constraints. Results show that reducing the number of RIS elements by 12% leads to a 10% decrease in dissipated energy without compromising the signal-to-noise ratio (SNR). Moreover, the RIS-assisted link achieves a 15--30 dB improvement in blocked regions while maintaining accurate PHO timing.

Extended Reality (XR) presents a challenging use case for 5G and 6G networks, requiring high data-rates and lowlatency communication to deliver a truly immersive experience. Moreover, in order to seamlessly translate physical actions to the virtual world, accurate gesture recognition and pose estimation are required. Current XR interaction solutions based on handheld controllers and cameras cannot easily capture full-body poses, inhibit the free use of hands, and require good visibility and a clear line of sight. In this work, we propose a multimodal sensing architecture for XR that combines 5G MillimeterWave (mmWave) Integrated sensing and communication (ISAC) and surface electromyography (sEMG) signals. 5G mmWave ISAC cannot only be used to deliver content wirelessly to the Head-mounted display (HMD), but also the same communication signals can be used to derive coarse body-level gestures and poses of the user, to support real-time avatar control. For fine-grained finger-level gestures, our architecture leverages lightweight sEMG sensors that capture forearm muscle activity. To illustrate the need of both modalities, we present evaluations of both sensing technologies. At the body level (5G), our architecture relies on power-per-beam-pair (PPBP), which can be computed from standard beam management or beam sweeping procedures of the 5G NR standard. PPBP-based sensing achieves 82.2$\pm$5.9% average accuracy when evaluated on users not seen during training. For fine-grained finger-level interactions, we show that surface electromyography (sEMG) carries strong discriminative information achieving consistent promising performance across different movement settings. Thus, combining the two modalities enables multi-scale gesture recognition, at the body level via existing 5G signals and finger level via lightweight sEMG sensors, forming a complete XR framework.

Falls are one of the leading causes of injury and hospitalization among elderly individuals, making reliable fall awareness an essential capability for safety monitoring in residential environments. However, existing fall detection systems often rely on wearable devices or fixed sensing installations, which may suffer from low user compliance, limited spatial coverage, or degraded performance under occlusion and poor lighting conditions. In this work, we propose \textbf{EM-Fall}, an embodied fall detection framework deployed on a mobile humanoid robot. The system integrates millimeter-wave (mmWave) sensing with robotic mobility, allowing the robot to actively adjust its sensing viewpoint and maintain target observability across rooms and under occlusion. To address interference in complex residential environments, including pet motion and multipath artifacts, we design a human-centered perception pipeline combined with lightweight temporal modeling to capture motion evolution before, during, and after fall events. We evaluate the proposed system across eight real indoor environments with four participants and construct an in-home mmWave fall detection dataset. Experimental results show that the embodied mobile sensing paradigm improves monitoring continuity and maintains robust fall detection performance under diverse environmental conditions. The proposed framework provides a practical solution for robot-assisted safety monitoring in home environments.

Non-contact material identification enables adaptive interaction for embodied intelligence yet faces challenges from geometry-induced variations (e.g., orientation, shape, distance) and single-modality ambiguities. In this paper, we present GaMi, a multimodal material identification system integrating mmWave and acoustic sensing to robustly operate under unconstrained geometric conditions. By leveraging the insight of shared geometric consistency between co-located bimodal sensors, GaMi employs an intra-sample cross-modal subtractive disentanglement framework. By semantically aligning modalities and subtracting the shared geometric context, it isolates intrinsic material features. Furthermore, GaMi incorporates inter-sample contrastive learning to correct the residual interference caused by cross-modal misalignment. Additionally, a pairing-based adaptation strategy between two modalities enables few-shot generalization across devices. Extensive evaluations on 20 materials show that GaMi achieves 95.2% accuracy, outperforming single-modality baselines across unseen geometric conditions.

Integrated sensing, communication, and computation (ISCC) provides a promising framework for indoor human-centric applications. In these applications, short-term human pose prediction facilitates continuous human tracking and resource allocation in advance. In this paper, we propose a Cramer-Rao bound (CRB) guided resource allocation framework for indoor mmWave ISCC systems to minimize the human pose prediction error under communication, latency, and energy constraints. We characterize the impact of sensing power on range-estimation uncertainty and point-cloud perturbation based on the CRB. To capture the impact of computation resources on prediction performance, we adopt an adaptive-depth Mamba-based pose prediction model, where lightweight prediction heads are attached after every layer to enable inference with different model depths. With this unified sensing-computation modeling, we establish a quantitative relationship among sensing power, model depth, and prediction error. Furthermore, we formulate a joint resource allocation problem to minimize the pose prediction error. To solve this problem efficiently, we develop an alternating optimization (AO)-based algorithm, where closed-form solutions are derived for the sensing power and model depth update steps. Simulation results show that the proposed scheme significantly reduces pose prediction error compared with baseline methods, validating its effectiveness for resource-constrained indoor human-centric ISCC systems.

Body shape and circumferences are clinically informative biomarkers for risk stratification, including measures such as waist to hip ratio, limb and trunk girths, yet conventional tools such as manual tape measures and optical scanners often require undressing and sustained poses. These demands slow workflows, compromise dignity, and exclude many older adults and people with limited mobility. To make measurement fast and contactless, we leverage millimeter-wave (mmWave) radar, which preserves privacy and operates through typical clothing, enabling quick full-body acquisition. In this work, we present a new optimization-based framework to recover 3D human shape and extract a comprehensive set of anthropometric measurements from volumetric mmWave data. Our method introduces a weighted registration pipeline that fits a parametric body model (SMPL) directly to the noisy mmWave point cloud. The core of our contribution is a vertex-weighting strategy that modulates a Chamfer energy function for reliable surface alignment and noise elimination. We further stabilize the fit by incorporating a foot-ground plane constraint and pose priors, optimizing directly for the SMPL parameters. Together, these components enable a fast, privacy preserving workflow that delivers high fidelity body shape and measurements through clothing without cameras or disrobing and with minimal cooperation, supporting frequent risk oriented assessments in clinics and care facilities for patients of all ages and mobility levels.

Intelligent Reflecting Surfaces (IRSs) are a promising technology for enhancing the spectral and energy efficiency of millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. In these systems, accurate channel estimation remains challenging due to the passive nature of IRS elements and the high pilot overhead in large-scale deployments. This paper presents a deep learning-based Multi-Block Attention (MBA) framework for efficient cascaded channel estimation in IRS-assisted mmWave MIMO systems that utilize orthogonal frequency division multiplexing (OFDM). First, we show the optimality of the discrete Fourier transform (DFT) and Hadamard matrices as phase configurations for least squares (LS) estimation. To reduce training overhead, we selectively deactivate IRS elements and compensate for induced feature loss using a two-stage architecture: (i) a Convolutional Attention Network (CAN) for spatial correlation recovery and (ii) a Complex Multi-Convolutional Network (CMN) for noise suppression. The MBA architecture mitigates error propagation through attention-guided feature refinement and denoising. Simulation results indicate that the MBA method reduces pilot overhead by up to 87% compared to the LS estimator. Additionally, at signal-to-noise ratios of 10 dB, our proposed method achieves approximately 51% lower normalized mean squared error (NMSE) than leading methods. It also maintains low computational complexity and adapts effectively to various propagation environments.

Millimeter-wave (mmWave) sensing enables privacy-preserving, always-on edge perception, but its measurements are often sparse, temporally irregular, and corrupted by high-frequency noise. Existing mmWave pipelines predominantly rely on artificial neural networks (ANNs), which achieve robustness through extensive preprocessing or deep architectures, thereby limiting their efficiency on edge devices. In this work, we study spiking neural networks (SNNs) for mmWave sensing from a mechanism-data alignment perspective. By leveraging the low-pass filtering behavior of leaky integrate-and-fire (LIF) dynamics, we analyze how their implicit temporal filtering interacts with the frequency structure of mmWave signals. Our analysis shows that when discriminative information resides in low-to-mid frequencies, LIF dynamics can inherently suppress high-frequency noise, clarifying when and why SNNs outperform ANNs. Based on this insight, we derive a principled criterion for configuring the membrane decay factor by matching the effective bandwidth of LIF dynamics to the data's discriminative spectral content. Experimental results across four widely used mmWave datasets validate the proposed frequency-matching hypothesis, yielding an average test-accuracy improvement of 6.22% and a 3.64$\times$ reduction in theoretical energy consumption relative to ANN baselines, under a unified evaluation protocol.

Millimeter-wave (mmWave) radar has emerged as a promising sensing modality for human perception due to its robustness under challenging environmental conditions and strong privacy-preserving properties. However, recovering accurate 3D human body meshes from radar observations remains difficult due to severe signal clutter and the inherently partial nature of radar measurements. Previous works typically adopt end-to-end frameworks that directly regress human body parameters from raw radar data, without decoupling signal interpretation from geometric reasoning or exploiting temporal motion cues, limiting learning performance. To address this, we propose a two-stage framework for radar-based human body reconstruction. First, we introduce a human reflection extraction module that performs coarse-to-fine localization and voxel-wise segmentation to produce a confidence-weighted radar volume encoding voxel-level human likelihood. Second, we design a motion-aware mesh recovery network that reconstructs the human body by jointly modeling per-frame geometry and inter-frame dynamics using a dual-branch architecture. Extensive experiments demonstrate that the proposed method outperforms existing approaches while maintaining computational efficiency.

Body composition assessment (BCA) provides detailed information about the distribution of different tissue types in the body, enabling more precise characterization of individuals than BMI or weight alone. Consistent and frequent BCA would be valuable for personalized medicine, but the gold standard methods for BCA, such as CT and MRI, are only practical for opportunistic monitoring of patients with clinical indications for imaging and are not suitable for routine use in the general population. Here, we consider an imaging modality which is not currently used in medical applications: millimeter wave (mmWave) radar. Commonly used in security settings, mmWave scans enable fast, non-intrusive, and privacy-preserving reconstruction of full body shape without the need to remove clothing. To demonstrate the feasibility of fast and convenient BCA from mmWave scans, we present a method for BCA value regression using a multi-task learning strategy that leverages synthetic mmWave-like point clouds derived from clinical imaging and parametric human models. We evaluate the model on a pilot cohort of real mmWave scans with bioimpedance-derived body fat measurements, supporting the feasibility of estimating VAT and body fat percentage (BFP) from mmWave data acquired through clothing in a standing posture. We find that the model can predict VAT and BFP with a mean absolute error of 1.0 L and 3.2%, respectively, demonstrating the potential of mmWave scanning for routine BCA in a wide range of settings.

Millimeter-wave (mmWave) frequencies promise multi-gigabit connectivity for vehicle-to-everything (V2X) networks, but face challenges in terms of severe path loss and mobility-related beam misalignment. Reliable V2X connectivity requires fast, double-directional beam alignment. However, existing methods suffer from high training overhead and limited generalization to unseen scenarios. This paper presents VIsion-based BEamforming(VIBE), a hybrid model-based, closed-loop, learning architecture for real-time double-directional mmWave beam management primed by camera sensing. VIBE fuses machine learning, model-based reasoning, and closed-loop RF feedback to balance beam-pair establishment latency with link quality. VIBE bypasses exhaustive training overhead and accelerates link establishment by leveraging camera observations to reduce the beam-search space. Lightweight beam refinement and offset tracking mechanisms adaptively refine beams in response to dynamic application requirements. VIBE is implemented and evaluated across online indoor/outdoor testbeds, public datasets, and real-time vehicular experiments, demonstrating strong generalization capabilities, making it suitable for real-time V2X communication. Comparisons with 5G NR hierarchical beamforming show that VIBE consistently maintains lower outage rates. Furthermore, VIBE outperforms state-of-the-art end-to-end ML models for beam selection when evaluated on public datasets and achieves outage rates as low as 1.1-1.4 %. The results show that a hybrid model-based, closed-loop learning architecture is better suited for real-world mmWave vehicular connectivity than end-to-end trained ML models. For reproducibility, we publish our code to https://github.com/UNL-CPN-Lab/Look-Once-Beam-Twice.

This paper introduces Dr-PoGO, a method for Simultaneous Localization And Mapping (SLAM) using a 2D spinning radar. Unlike cameras or lidars that require line-of-sight, millimetre-wave radars can `see' through dust, falling snow, rain, etc. Accordingly, it is a great modality for robust perception regardless of the weather conditions. While most existing radar-based SLAM methods rely on the extraction of point clouds or features to perform ego-motion estimation, Dr-PoGO leverages direct registration techniques for odometry (DRO) and loop-closure registration. An off-the-shelf radar-focused place recognition algorithm, RaPlace, provides loop-closure candidates. As RaPlace does not provide relative transformations, Dr-PoGO introduces a coarse-to-fine registration that uses visual features and descriptors to obtain an initial guess for the direct transformation refinement. The global trajectory is optimized in a pose-graph optimization. Dr-PoGO demonstrates state-of-the-art performance over 300km of data in various real-world automotive environments. Our implementation is publicly available: https://github.com/utiasASRL/dr_pogo.

Maintaining robust millimeter-wave (mmWave) connectivity in vehicular networks requires real-time adaptation to environmental dynamics, sensor degradation, and link variability. This paper presents Enwar 3.0, an environment-aware reasoning framework that unifies multi-modal sensing, agentic large language models (LLMs), and context-driven model selection for predictive beamforming, blockage detection, and handover management. Building upon prior iterations of Enwar, the proposed architecture integrates a classifier-driven assessment of sensor health with a primed LLM that orchestrates multiple specialized agents through structured, task-aware prompting. A novel synthetic degradation pipeline enables the training of a sensor degradation classifier that detects real-time impairments across camera, radar, LiDAR, and GPS inputs, achieving over 99% accuracy. The LLM, trained via chain-of-thought (CoT) priming and human-in-the-loop feedback, coordinates agent calls for beam selection, blockage forecasting, and environment perception while dynamically loading sensor-specific models based on environmental context. Extensive evaluations across 15 sensor combinations demonstrate that Enwar 3.0 delivers state-of-the-art performance in both predictive accuracy and interpretability, with beam selection accuracy exceeding 88%, blockage F1-scores surpassing 98%, and reasoning correctness reaching 87% on complex decision prompts. This work establishes a scalable foundation for LLM-integrated wireless systems that reason, perceive, and adapt in real-time.

Channel estimation is crucial in 5G communication networks for optimizing transmission parameters and ensuring reliable, high-speed communication. However, the use of multiple-input and multiple-output (MIMO) and millimeter-wave (mmWave) in 5G networks presents challenges in achieving accurate estimation under strict latency requirements on resource-limited hardware platforms. To address these challenges, we propose SwiftChannel, an algorithm-hardware co-design framework that integrates a hardware-friendly deep learning-based channel estimator with a dedicated accelerator. Our approach employs a convolutional neural network enhanced with a parameter-free attention mechanism, which effectively reconstructs full-resolution spatial-frequency domain channel matrices from low-resolution least squares (LS) estimates. We further develop a multi-stage model compression pipeline combining knowledge distillation, convolution re-parameterization, and quantization-aware training, resulting in substantial model size reduction with negligible accuracy loss. The hardware accelerator, implementing the compressed model and the LS estimator on FPGA platforms using High-level Synthesis (HLS), features a fine-grained pipeline architecture and optimized dataflow strategies. Tested on a Zynq UltraScale+ RFSoC, the accelerator achieves sub-millisecond latency, providing up to 24x speed-up and over 33x improvement in energy efficiency compared to GPU-based solutions. Extensive evaluations demonstrate that the proposed design generalizes not only across various noise levels and user mobilities, but also to a variety of unseen channel profiles, outperforming state-of-the-art baselines. By unifying algorithmic innovation with hardware-aware design, our work presents a future-proof channel estimation solution for 5G MIMO systems.

Accurate terrain perception is essential for terrain-following flight of agricultural unmanned aerial vehicles (UAVs), yet remains challenging in real-world farmland due to occlusions, complex terrain geometry, and environmental disturbances. Millimeter-wave (mmWave) radar is a promising sensing modality for this task due to its robustness to adverse conditions; however, existing UAV-mounted radar systems rely on fixed field of view (FoV) and terrain extraction methods designed for dense LiDAR data, leading to incomplete and unreliable terrain estimation. To address these limitations, we present a low-cost rotating mmWave radar-enabled terrain perception framework for agricultural UAVs operating in complex farmland environments. Specifically, a mechanically rotating sensing design is introduced to enlarge spatial coverage and improve terrain observability beyond the limitations of fixed-view radar under dynamic low-altitude flight. Building upon this sensing capability, we further design a pose-consistent terrain reconstruction pipeline tailored for sparse, noisy, and partially observable radar data, enabling reliable ground extraction and continuous terrain surface estimation in challenging agricultural scenarios. The complete system is deployed on a real agricultural UAV platform and comprehensively evaluated through extensive field experiments. Experimental results demonstrate improved terrain coverage and estimation accuracy, achieving an F1 score of 94.42 for ground segmentation, while the closest rival only achieves 90.48. Thus, leading to more robust terrain following flight.

Millimetre-wave (mmWave) radar offers a more privacy-preserving alternative to RGB-based human pose estimation. However, existing methods typically rely on pre-extracted intermediate representations such as sparse point clouds or spectrogram images, where the rich spatiotemporal information naturally present in radar video streams is discarded for model learning, while such signal processing adds system complexity. In addition, existing solutions are mainly conducted in an end-to-end supervised manner without leveraging unlabelled raw video streams to learn generalized representations. In this study, we present MAEPose, a masked autoencoding-based human pose estimation approach that operates directly on mmWave spectrogram videos. MAEPose learns spatiotemporal motion-aware generalized representations from unlabelled radar video, and leverages its heatmap decoder for multi-frame pose estimation predictions. We evaluate it across three datasets based on leave-one-person-out cross-validation with rigorous statistical testing. MAEPose consistently outperforms state-of-the-art baselines by up to 22.1% in MPJPE p<0.05, and maintains robust accuracy under zero-shot bystander interference with only a 6.5% error increase. Ablation studies confirm that both the pre-training and the heatmap decoder contribute substantially, while modality analysis indicates that leveraging Range-Doppler video as input achieves better pose estimation performance than Range-Azimuth or their fusion, with lower computational cost.

This paper provides a concise yet comprehensive review of recent advancements in millimeter-wave (mm-wave) oscillators below 100 GHz and sub-terahertz (sub-THz/THz) oscillators above 100 GHz for next-generation computing and communication systems, including 5G, 6G, and beyond. Various design approaches, including CMOS, SiGe, and III-V semiconductor technologies, are explored in terms of performance metrics such as phase noise, output power, efficiency, frequency tunability, and stability. The review highlights key challenges in achieving high-performance and reliable oscillator designs while discussing emerging techniques for performance enhancement. By evaluating recent design trends, this work aims to offer valuable insights and design guidelines that facilitate the development of robust mm-wave and sub-THz/THz oscillators for future communication, computing, and sensing applications.

Millimeter-wave (mmWave) radar has shown great potential for contactless, privacy-preserving, and robust human sensing, yet existing mmWave-based human mesh reconstruction (HMR) studies are still limited by the lack of benchmarks for generalization analysis under configuration shifts and fair comparison of different algorithms. To address the limitation, we present DGHMesh, a large-scale dual-radar mmWave dataset and generalization-focused benchmark for HMR. It contains data from 15 subjects performing 8 actions, with 360,000 synchronized frames collected from FMCW radar, SFCW radar, RGB images, and high-precision 3D HMR annotations. In addition, the dataset provides synchronized raw I/Q data from both radar modalities and accurately calibrated radar spatial positions. The benchmark is designed to evaluate HMR methods under diverse measurement configurations, including human position shifts, human orientation shifts, subarray size variations, and cross-subject settings. Based on DGHMesh, we also propose mmPTM, a query-based multi-radar fusion framework that jointly exploits point clouds and imaging tubes for HMR. Extensive experiments are conducted against representative baselines under different settings. The results demonstrate that mmPTM consistently achieves outstanding accuracy and competitive generalization capability across multiple sub-benchmarks, validating the effectiveness of multi-radar fusion and the practical value of the proposed dataset and benchmark for mmWave-based HMR research. DGHMesh and mmPTM are publicly available at https://github.com/SPIresearch/DGHMesh.(The complete benchmark and code will be released after paper publication)

AIGC has shown remarkable success in CV and NLP, and has recently demonstrated promising potential in the wireless domain. However, significant data imbalance exists across RF modalities, with abundant WiFi data but scarce mmWave and RFID data due to high acquisition cost. This makes it difficult to train high-quality generative models for these data-scarce modalities. In this work, we propose RF-CMG, a diffusion-based cross-modal generative method that leverages data-rich WiFi signals to synthesize high-fidelity RF data for scarce modalities including mmWave and RFID. The key insight of RF-CMG is to decouple cross-modal generation into high-frequency guidance and low-frequency constraint, which respectively learn high-frequency distribution from limited target modality data and preserve the underlying physical structure via low-frequency constraints during generation. On this basis, we introduce a Modality-Guided Embedding (MGE) module to steer the reverse diffusion trajectory toward the target high-frequency distribution, and a Low-Frequency Modality Consistency (LFMC) module to progressively enforce low-frequency constraints to suppress the accumulation of source-modality structural biases during inference, enabling high-quality target-modality generation. Performance comparison with several prevalent generative models demonstrates that RF-CMG achieves superior performance in synthesizing RFID and mmWave signals. We further showcase the effectiveness of the data generated by RF-CMG in gesture recognition tasks, and analyze the impact of the proportion of synthetic data on downstream performance.

Reconfigurable Intelligent Surfaces (RIS) have the potential to engineer smart radio environments for next-generation millimeter-wave (mmWave) networks. However, the prohibitive computational overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization severely hinder practical large-scale deployments. To overcome these bottlenecks, we introduce a per-element CSI-free paradigm powered by a Hierarchical Multi-Agent Reinforcement Learning (HMARL) architecture to control mechanically reconfigurable reflective surfaces. By substituting pilot-based channel estimation for each element of the device with accessible user localization data, our framework leverages spatial intelligence for macro-scale wave propagation management. The control problem is decomposed into a two-tier neural architecture: a high-level controller executes temporally extended, discrete user-to-reflector allocations, while low-level controllers autonomously optimize continuous focal points using Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) scheme. Comprehensive deterministic ray-tracing evaluations in an indoor mmWave scenario demonstrate that this hierarchical framework achieves received signal strength indicator (RSSI) improvements of up to 7.79 dB over centralized Proximal Policy Optimization (PPO) baselines. Furthermore, the system maintains resilient beam-focusing performance under practical sub-meter localization tracking errors for up to four users and two reflector arrays. By eliminating execution-time CSI overhead while preserving high-fidelity signal redirection, this work provides a scalable and cost-effective step toward intelligent indoor wireless environments.

We present mmFHE, the first system that executes the entire cloud-side mmWave sensing pipeline including the DSP and ML inference under fully homomorphic encryption (FHE). mmFHE encrypts range profiles on an edge device after lightweight plaintext preprocessing and executes the entire mmWave signal-processing and ML inference pipeline homomorphically on a semi-honest cloud that operates exclusively on ciphertexts. At the core of mmFHE is a library of seven composable, data-oblivious FHE kernels that replace standard DSP routines with fixed arithmetic circuits for different application-specific pipelines. We demonstrate this approach on two representative tasks: vital-sign monitoring and gesture recognition. We formally prove two cryptographic guarantees for any pipeline assembled from this library: input privacy and data obliviousness. These guarantees effectively neutralize various supervised and unsupervised privacy attacks on raw data, including re-identification and data-dependent privacy leakage. Evaluation on three public radar datasets shows that encryption introduces negligible error versus the plaintext pipeline, with 84.5% gesture accuracy (vs. 84.7%). End-to-end cloud GPU latency is 1.21 s per 10 s vital-sign window and 5.76 s per 3 s gesture window. These results establish the initial feasibility of end-to-end mmWave sensing under FHE on commodity hardware.