Execution Efficiency

Scheduling activities in business processes can improve efficiency (e.g., reduce makespan), but is challenging because the exact sequence of activities required to complete a case is often uncertain due to decisions based on data that emerges during execution. Nevertheless, probabilistic information regarding such decisions can often be estimated or derived from historical execution logs, and can help anticipate which execution paths are likely to lead to successful completion. Planning with particular execution paths affects feasibility, i.e., the probability of successful completion, and the expected number of superfluous activities that are planned but never executed. We frame the problem as a chance-constrained optimization problem and present two formulations: A decomposed approach with two stages, a planning stage that minimizes the expected number of superfluous activities subject to a feasibility constraint, and a scheduling stage that minimizes the makespan over the planned activities; and an integrated approach that combines planning and scheduling into a single formulation. Evaluation on two real-world and one synthetic dataset shows that the integrated approach yields superior makespans but is intractable at scale, while the decomposed approach scales to large settings.

Dexterous manipulation policies learned by imitation are typically evaluated for robustness to variation in scenes, objects, or instructions, but their performance across task execution speeds is less often examined. This leaves open how much temporal robustness a learner retains relative to the expert it imitates. We compare an expert and learner under the same task conditions, initial-condition draws, and speedup factors. We instantiate the evaluation in ParcelStow, a contact-rich task in which the robot acquires, reorients, and inserts a parcel. The demonstrations span the speedup range for the manipulation phases after parcel acquisition. A scripted expert and an Action Chunking with Transformers (ACT) policy trained from the expert's demonstrations both achieve 100 percent task success at nominal speed. Their success rates diverge within the demonstrated range: at its maximum, expert success is 84 percent and ACT success is 53 percent. Two ACT policies with different parameter initializations show similar degradation, decreasing by 34 and 48 percentage points from nominal speed to the maximum demonstrated speed, compared with 16 points for the expert. Stage-level analysis shows that 35 of ACT's 47 failures at the maximum demonstrated speed are insertion misalignments. Under the relative-motion handoff, every ACT acquisition retains the parcel through reorientation and transfer in free space, but only 64 percent complete the overall task, compared with 95 percent after expert acquisition. Across all evaluated policies and speeds, none of the 414 acquisitions without force closure completes the task. Equal nominal task success therefore does not imply preservation of expert performance across execution speeds. Code, data, and evaluation scripts are available at https://github.com/coenwerem/parcelstow.

Large Language Model (LLM) agents based on the ReAct paradigm have demonstrated remarkable capabilities in tool use and task execution. However, ReAct suffers from a fundamental efficiency problem: every query triggers a complete reasoning loop from scratch, and similar queries repeat identical steps without leveraging historical experience. We propose TRIAGE,a three-level routing framework that reduces token consumption by reusing historical execution trajectories. Its core innovation is TaaS (Trajectory-as-a-Skill), which abstracts historical execution trajectories into reusable skills, realizing 'experience as a service'. TRIAGE classifies queries into three levels: (1) Direct Reuse-identical queries, 0 tokens; (2) Skill Substitution-similar queries, 0 tokens via deterministic parameter substitution; (3) Full ReAct-novel queries, automatically stored for future reuse. In large-scale experiments on 1,007 security monitoring queries, TRIAGE achieves 62.3% token savings, with 56.0% of queries at Level 2 and 5.5% at Level 1, both executing at zero cost. Cross-domain validation on ToolBench (15 domains, 345 queries) achieves 76.3% token reduction, confirming the generalizability of semantic routing. An online learning experiment demonstrates cold-start-to-mature evolution: the L2 hit rate rises from 0% to 57% within the first 100 queries, and the average token cost drops from 198 to 74.7. We also propose an automatic Skill extraction mechanism that distills high-frequency trajectory patterns into deterministic Skills, creating a positive feedback loop of 'the more you use it, the more efficient it becomes'.

Large language models are increasingly expected to execute complex workflows whose success depends on maintaining interdependent constraints and producing artifacts that satisfy strict end-to-end verification. Yet successful execution experience is typically lost after a single run, forcing subsequent models to rediscover strategies and failure modes from scratch. We study whether such experience can instead be externalized and reused through EvoMap, where verifier-confirmed execution trajectories are consolidated into structured Gene. To evaluate this setting, we introduce the Long-Workflow Benchmark (LongWoF-Bench), comprising 778 machine-verifiable tasks across code generation, agent-environment synthesis, mathematical reasoning, and rule following. On the 252 tasks with verifier-confirmed Opus trajectories, evolved EvoMap Gene outperform Skill across all seven evaluated models by 8.7-15.5 percentage points, with the gains extending to consumer models from different model families. In contrast, reference-distilled Gene do not exhibit the same advantage, indicating that compact representation alone is insufficient and that Gene utility is closely associated with verified experience provenance. For Claude Opus, Gene reuse also completes 39 more tasks than Skill while reducing solve-time token consumption by 9.9%. Together, these results show that verified execution experience can be retained and shared as a reusable external resource, enabling models to improve long-workflow completion without repeatedly paying the full cost of experience discovery.

Enterprises increasingly seek to query data lakes using natural language via AI-driven tools like semantic operators or deep research agents. However, the latter operates as an opaque black box, hiding its intermediate reasoning and data retrieval steps, and failing to expose controls for managing API costs and execution latency. Meanwhile, the former can be prohibitively expensive for enterprise-scale data lakes. Consequently, analysts using these systems lack the agency to intercept hallucinated premises, verify intermediate results, or correct the system's trajectory. We present Carnot, an interactive execution engine for AI-driven analytics. Carnot compiles natural language requests into physical execution graphs and surfaces them through an interactive notebook interface. Rather than waiting blindly for a final output, users can critique the plan, incrementally execute operators, inspect intermediate data, or directly edit the underlying code or semantic operator instructions. Carnot's query optimizer will optimize the query with respect to cost or latency constraints provided by the user. Our demo will showcase how Carnot helps users achieve efficient and verifiable insights on workloads motivated by real enterprise use cases.

World Action Models (WAMs) jointly predict future actions and the evolution of the environment. At each inference, a WAM generates a chunk of actions and the robot executes a fixed prefix before replanning. We argue that this fixed execution horizon is poorly matched to execution dynamics: the chunk reliability varies across task stages, so when to replan depends on the result of accumulated execution, not on the step counts. We propose TempoWAM (Timing Execution by Monitoring Progress Online), a lightweight plug-and-play execution scheme for WAMs. A Recurrent Progress Monitor first estimates task progress from the current observation, task instruction, remaining actions, and execution history; and an Adaptive Execution Protocol then evaluates whether the chunk is advancing the task to decide if replanning is needed. To bridge the training-deployment gap, the protocol is calibrated by a task-dependent calibration factor with online adaptation. Experiments on LIBERO, RoboTwin, and real-world tasks show that TempoWAM consistently improves the efficiency-success trade-off of WAM execution. On real robots, it reduces WAM inferences by 26.9% on easy tasks while maintaining success, and improves success by 13.3 points on difficult tasks.

While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/

General-purpose skills promise reusable procedural knowledge for language agents, yet semantic relevance does not guarantee execution utility: a retrieved skill may encode assumptions that conflict with the current task, execution environment, or other retrieved skills. We formalize this problem as the skill--execution misfit. To address it, we propose SkillAligner, a training-free execution-time skill adaptation framework that treats retrieved skills as adaptable drafts rather than fixed instructions. Before execution, SkillAligner performs a one-time joint adaptation that specializes useful skill fragments to task requirements, aligns their procedural assumptions with the available execution interface, and composes the resulting guidance by resolving dependencies, conflicts, and redundancy across skills. The adapted content is consolidated into a compact execution guide and reused throughout the subsequent trajectory. Extensive experiments across diverse agent benchmarks and model backbones show that SkillAligner substantially improves task performance over existing skill-use baselines, reduces skill-induced regressions at the instance level, and lowers total inference cost.

Agentic systems have emerged as a promising paradigm for solving complex tasks by coordinating specialized LLM-based agents. However, most existing systems primarily optimize task success while giving limited consideration to execution efficiency under practical constraints such as executor capability and computational cost. Existing router-based methods have limited ability to reason over rich, evolving task contexts, multi-step dependencies, and intermediate execution feedback, and often generalize poorly to unseen executors. We propose EASy, a trainable agentic framework that jointly optimizes task performance and computational efficiency through reinforcement learning. EASy equips an LLM-based orchestrator with explicit knowledge of the capability and cost profiles of heterogeneous executors, enabling context-sensitive coordination beyond performance-only routing. It further introduces a milestone-plan-act workflow that decomposes complex tasks into manageable milestones, constructs dependency-aware execution graphs, assigns suitable executors, and parallelizes independent steps while adapting subsequent decisions to intermediate outcomes. To train the orchestrator, we develop a tree-structured rollout procedure that explores alternative milestone decompositions and execution plans, together with multi-component rewards that capture task correctness, execution efficiency, and trajectory completeness. Extensive experiments on mathematical reasoning, embodied decision-making, and deep research benchmarks show that EASy consistently achieves stronger performance-efficiency trade-offs than strong agentic baselines.

World Action Models generate fixed-horizon action chunks through iterative denoising, creating substantial inference latency that can cause pauses, stale actions, and discontinuities during robotic execution. We present an empirical study of asynchronous deployment strategies that overlap model inference with action execution to enable responsive and smooth control. We compare six strategies, including synchronous execution, pure asynchronous switching, post-hoc action blending, denoising-time blending, inference-time velocity guidance, and prefix-conditioned generation, on a 10 Hz bimanual robot. Evaluation combines offline trajectory analysis with online experiments across dynamic manipulation, precision-critical placement, and long-horizon tasks. Our results identify accurate temporal alignment between observations, predictions, and executed commands as a fundamental requirement. Alignment errors produce persistent chunk-boundary discontinuities that cannot be corrected through blending alone. With proper alignment, direct action weighting provides a simple and smooth baseline but sacrifices accuracy in precision-critical tasks. Inference-time velocity guidance fails to reliably constrain committed actions on our platform. In contrast, prefix-conditioned generation achieves the best overall balance between task performance, execution speed, and trajectory smoothness by learning consistent action continuations during training. These findings clarify the practical trade-offs among asynchronous deployment strategies and provide guidance for deploying high-latency World Action Models in real-time robotic systems.

Diffusion models have become the central backbone for modern image, video, and audio generation, but their efficient service remains a challenge. Unlike autoregressive decoding, diffusion inference repeatedly updates high-dimensional spatial or temporal latents over many denoising steps. This all-region execution pattern makes generation latency high and limits serving throughput. Existing multi-GPU parallelization methods can reduce per-step computation, but often introduce substantial activation exchange overhead, causing communication to offset or even outweigh the benefits of parallel execution. This paper presents FlashDiff, a diffusion serving system that improves inference efficiency through adaptive regional execution and scheduling. FlashDiff is based on the observation that diffusion refinement is not uniform across latent regions or denoising steps: different regions often stabilize at different rates, while neighboring steps exhibit strong temporal correlation. FlashDiff leverages these properties to selectively execute only regions that require further refinement and to reallocate the resulting compute slack across concurrent serving requests. FlashDiff consists of three mechanisms. First, it decomposes the latent representation into coherent execution regions using early-stage attention signals, preserving semantic structure while exposing fine-grained parallelism. Second, it uses a lightweight runtime controller to estimate region activity and bypass low-impact updates when further refinement is unlikely to affect output quality. Third, it applies an affinity-aware online scheduler that co-locates dependent regions, balances residual load across GPUs, and reuses reclaimed compute capacity to improve serving efficiency. Across real-world image, video, and audio workloads, FlashDiff reduces end-to-end serving latency by 30-97% and improves throughput by 1.2-2.2x.

LLM agents today are caught in an awkward bind. Lock them down with static safety instructions and they rarely venture beyond the obvious; give them free reign with tools and multi-agent debate, and safety violations quickly follow. Rather than forcing a single model to juggle both creativity and caution, we separate the concerns across specialized roles. A Disrupter generates unconventional proposals, a Validator enforces hard runtime checks at the tool gateway, and a Broker pulls in distant but relevant analogies. Failures are not discarded -- they are compiled, via MCTS, into compact, signed constraint patches we call Scars. These patches are cached locally and inherited by future cohorts, turning repeated failures into reusable, low-cost runtime constraints. In a spatial-semantic sandbox (N=20 runs, p<0.01), our cohort reaches remote targets where debate fails, the Validator prevents all executed breaches, and Scars reduce token consumption by 15.1% by avoiding redundant validator checks. Furthermore, credit-based Communication Allocation Scores (CAS) restrict outbound bandwidth, reducing overall token costs by 55.9% under resource constraints.

The increasing energy demand of software systems is raising concerns about their environmental impact and associated costs. Reasoning on energy usage early in the development flow has the potential to significantly reduce the overall energy usage of a software system, as it allows developers to make informed design and refactoring decisions before inefficiencies propagate. However, assessing energy usage without repeated profiling and direct measurement is difficult, which limits early reasoning in practice. This study investigates the limits of method-level energy prediction in Java, examining whether static source code metrics complemented with method-level execution time can estimate the energy consumption of Java methods. We profile 2,786 Java methods to extract 33 static features and measure execution time and energy, then train and compare eleven regression models. Our findings show that static source code metrics alone yield poor predictive performance, with average R2 values close to zero. Incorporating execution time as a lightweight dynamic input significantly improves accuracy, raising R2 to as high as 0.46. Execution time, internal method calls, and cyclomatic complexity consistently emerge as the strongest predictors of energy consumption.

Vision-Language-Action (VLA) policies that execute fixed-length action chunks can exhibit multimodal bifurcation: a cross-chunk inconsistency in which adjacent chunks generated from independent Gaussian latents can converge to incompatible trajectory modes, producing abrupt discontinuities at chunk boundaries. Existing remedies either require backpropagation through the policy at each denoising step, rely on rejection sampling, or require retraining, each trading computational cost or task reliability for smoother transitions. We propose SEAM (Smooth Execution of Action-Chunked Motion), a training-free inference-time method for flow matching VLAs. SEAM exploits a simple synchronous-execution insight: after the robot consumes the executed prefix, the previous chunk's unexecuted tail is already available as an analytic consistency reference. Its core mechanism, Velocity-guided Loss Steering (VLS), derives a time-dependent target from this tail and applies a closed-form correction after each Euler step without backpropagating through the policy network. On LIBERO-10 with pi_0.5, SEAM reduces boundary jerk by 28%, reduces chunk transition discontinuity by 27%, preserves baseline-level task success, and keeps denoising-loop cost near the unguided baseline.

Before fixing an issue, it is useful to first reproduce it by generating a bug reproduction test (BRT). However, generating a BRT is itself a challenging task, because issue descriptions tend to be informal, making it difficult to determine whether a candidate BRT indeed fails for the reason in the issue. Prior work has attempted to tackle this problem via inference scaling, using large language models to generate many BRTs and patches, then using execution feedback to select and improve them. Unfortunately, this is expensive and the feedback is unreliable. This paper explores evolutionary programming for BRT generation to sharpen the feedback, while enhancing evolutionary programming to keep costs in check. Our new approach, EvoOtter, controls test execution costs via successive halving. Furthermore, it controls LLM costs via batched crossover for an entire generation in a single LLM call, as well as via rule-based code mutations, with a new fitness score tailored for BRTs. As a result, EvoOtter generates state-of-the-art quality BRTs at the fraction of the cost of prior inference-scaling approaches to this problem. More broadly, this paper points at how to efficiently and effectively combine evolutionary programming with large language models for software engineering.

This study demonstrates an alignment of per-word processing time in a popular state-space language model Mamba and human readers. In Mamba, the recurrent state transition at each layer conceptually takes some duration of time, the discretization timestep $Δ_t$, determined dynamically in response to the input. Using a naturalistic reading dataset, we show that the per-word timestep from Mamba is a significant predictor of human reading times, and remains significant even when known predictors such as GPT-2 surprisal are controlled for. We further suggest, through formal analysis of Mamba's architecture and internal dynamics, that Mamba can serve as a new, valuable lens to look at human real-time language processing with ever-updated memory, because it allows us to look at how each module (layer) weighs short- and long-term information retention, and how noise may interact with dynamic, continuous memory representation. Code is available online.

How fast could a deep-learning model run on target hardware, and how far is today's implementation from that limit? These questions are central to software, hardware, and algorithm optimizations. Speed-of-Light (SOL) analysis answers them by computing a workload's theoretical minimum execution time on a given architecture. Yet deriving SOL bounds remains manual, error-prone, and disconnected from rapid model development. To close this gap, we introduce SOLAR, a framework that automatically derives validated SOL bounds from PyTorch and JAX source code. SOLAR leverages both generative and deterministic components in its flow: an LLM frontend translates any source programs into an executable Affine Loop IR, validated by output comparison; a deterministic flow lifts the IR into an einsum graph; and an analytical backend computes unfused, fused, and cache-aware SOL bounds. SOLAR provides comprehensive operator and language coverage, produces validated bounds with zero observed SOL violations, and offers multi-fidelity analysis that tightens bounds and surfaces optimization insights. We evaluate SOLAR across KernelBench, JAX/Flax models, and robotics workloads. These experiments demonstrate four use cases: headroom analysis at multiple fidelity levels, identifying optimization opportunities, cross-platform exploration, and inverse-roofline hardware provisioning.

Software performance optimization is a notoriously complex and manual task. Despite the growing use of Large Language Models (LLMs) for code refinement, we still lack benchmarks that capture how optimization actually happens in real-world codebases. Existing frameworks often oversimplify the problem by focusing on isolated functions or a single performance metric, missing the critical trade-offs between execution time and memory footprint, the inherent noise of the measurement environment, and the variability introduced by different input data and execution conditions. We address this by introducing SWE-Pro, a repository-level benchmark derived from 102 expert-written optimizations from open-source projects. Unlike previous benchmarks, SWE-Pro pairs each task with parameterized tests to evaluate runtime, peak memory, and Time-Weighted Memory Usage (TWMU) across varying input data and execution conditions under noise-aware measurement conditions. Our evaluation shows that current LLMs struggle significantly: runtime gains are negligible, and memory optimizations are nearly non-existent. This stands in sharp contrast to expert implementations, which achieve an aggregate speedup of 15.5x and peak memory reduction of 171.3x over benchmark tasks. Expert-written improvements are observed in 91.2% of tasks for runtime and 65.7% for peak memory. Our findings expose a substantial gap between current LLM capabilities and the demands of expert-level engineering.

While the validity of LLMs' use in the legal context remains subject to ethical and legal debate, legal professionals are already experimenting with personal LLMs, if only for translation and reformulation. However, even such a seemingly innocuous use can introduce biases through case processing speed if LLM assistants selectively refuse assistance on certain topics. To better anticipate such biases, we investigate several modern small LLMs that are most likely to be used as on-device assistants, to assess the impact of overrefusal on legal prompts. Surprisingly, we find that authority-style prefixes (you are acting as an assistant of the national supreme court'', [...] defense lawyer'') systematically increase refusal rates by 2--20x over the no-prefix baseline, while a known role-play jailbreak prefix shows mixed effects, sharply increasing refusals in some models and barely shifting them in others. The finding suggests that small on-prem deployable LLMs are unstable under contextual framings that a real institutional user might naturally introduce, and further investigation is essential to minimize opportunities for bias.

AI agents are driving a new software paradigm, with the ability to autonomously call tools, extract information, manage memory, and complete tasks that span applications and data sources. Most existing end-user operating systems, however, are designed for application-centric workflows and offer little native support for AI agents. This mismatch limits the wider adoption of agents and leads to execution overhead and safety risks when running agents on conventional systems. While the concept of agent-native operating systems is emerging, the research community lacks an open testbed to explore the architectural primitives desired for agent-mediated interaction. We present AOHP (Android Open Harness Project), an OS-level agent harness built on the Android Open Source Project (AOSP). The core design principle of AOHP is to treat agents as first-class OS actors, enabling adaptive user interfaces and agent-friendly runtime environments. AOHP preserves the mature Android software and hardware ecosystem while introducing three agent-oriented system mechanisms: personalized service composition, efficient agent interfaces, and secure information flow. Based on preliminary experiments on challenging tasks covering key capabilities of OS agents, AOHP shows clear advantages in task completion (+21.12% completion rate), execution cost (-51.55% token cost), and security-policy compliance.

While large language models (LLMs) have greatly advanced the functional correctness of automated code translation systems, the runtime efficiency of translated programs has received comparatively little attention. With the waning of Moore's law, runtime efficiency has become increasingly important for program quality, alongside functional correctness. Our preliminary study reveals that LLM-translated programs often run slower than human-written ones, and this issue cannot be remedied through prompt engineering alone. Therefore, our work proposes SwiftTrans, a code translation framework comprising two key stages: (1) Multi-Perspective Exploration, where MpTranslator leverages parallel in-context learning (ICL) to generate diverse translation candidates; and (2) Difference-Aware Selection, where DiffSelector identifies the optimal candidate by explicitly comparing differences between translations. We further introduce Hierarchical Guidance for MpTranslator and Ordinal Guidance for DiffSelector, enabling LLMs to better adapt to these two core components. To support the evaluation of runtime efficiency in translated programs, we extend existing benchmarks, CodeNet and F2SBench, and introduce a new benchmark, SwiftBench. Experimental results across all three benchmarks show that SwiftTrans achieves consistent improvements in both correctness and runtime efficiency.

Ultra-long-context capability is becoming indispensable for frontier LLMs: agentic workflows, repository-scale code reasoning, and persistent memory all require the model to jointly attend over hundreds of thousands to millions of tokens, yet the quadratic cost of softmax attention makes this untenable at deployment scale. We introduce MiniMax Sparse Attention (MSA), a blockwise sparse attention built upon Grouped Query Attention (GQA). A lightweight Index Branch scores key-value blocks and independently selects a Top-k subset for each GQA group, enabling group-specific sparse retrieval while maintaining efficient block-level execution; the Main Branch then performs exact block-sparse attention over only the selected blocks. Designed around a principle of simplicity and scalability, MSA is deliberately streamlined, making it straightforward to deploy efficiently across a broad range of GPUs. To translate sparsity into practical speedups, we co-design MSA with a GPU execution path that uses exp-free Top-k selection and KV-outer sparse attention to improve tensor-core utilization under block-granular access. On a 109B-parameter model with native multimodal training, MSA performs on par with GQA while reducing per-token attention compute by 28.4x at 1M context. Paired with our co-designed kernel, MSA achieves 14.2x prefill and 7.6x decoding wall-clock speedups on H800. Our inference kernel is available at: https://github.com/MiniMax-AI/MSA. A production-grade natively multimodal model powered by MSA has been publicly released at: https://huggingface.co/MiniMaxAI/MiniMax-M3.

Many real-world questions over business, legal, and scientific corpora are natural-language versions of database-style queries over records latent in text. Existing retrieval-augmented generation (RAG) systems are optimized primarily for semantic relevance, but retrieving plausible passages does not guarantee correct query execution. We introduce QO-Bench, a diagnostic benchmark for query-operator question answering over typed event tuples. The benchmark covers 22,984 news articles and 614 corporate events, with 18 query templates instantiating 785 questions. Each gold answer is deterministically computed from typed event tuples and scored by recall, with answers matched to the gold tuples by exact match rather than an LLM judge. This design enables operator-level diagnosis such as joins and intersection. We evaluate RAG, ReAct RAG, GraphRAG, and information-extraction-to-SQL under matched conditions, with a long-context oracle ceiling to isolate retrieval failure. A two-axis framework -- index-time preservation versus query-time execution -- predicts where each paradigm fails, and the results bear it out: systems retrieve relevant text but discard the typed values operators need, and the deployable paradigm ranking inverts across operators, with similarity retrieval leading on filter/project and extraction-to-SQL on intersection and counting. Even given the gold evidence, a long-context oracle stays far from saturated, so operator execution -- not retrieval alone -- is a core bottleneck that a stronger answer model does not remove. QO-Bench reframes the goal from passage relevance to query-operator-preserving retrieval. The benchmark, predictions, and code are released at https://github.com/ZHANG-MENGAO/qo-bench.

The rapid growth of large language model (LLM) inference services has increased the demand for efficient multi-tenant GPU scheduling. While modern inference runtimes such as vLLM improve throughput through continuous batching and optimized memory management, accurately estimating the runtime cost of heterogeneous inference requests remains challenging. In practice, admission-time workload estimates may deviate from observed execution behavior, leading to workload misclassification, queue imbalance, increased tail latency, and degraded Quality-of-Service (QoS). This paper presents DriftSched, a QoS-aware scheduling framework for multi-tenant LLM inference serving on NVIDIA L4 GPUs. DriftSched combines workload classification, token-budget estimation, tenant-aware queue management, and an online feedback mechanism to refine workload estimates using runtime observations. The framework evaluates FIFO, Priority, Weighted, Shortest-Job-First (SJF), and Aging Priority scheduling policies under heterogeneous multi-tenant workloads. Experimental results show that adaptive calibration reduces workload estimation error by an average of 38.8% (MAE) and 40.5% (RMSE), improving workload classification stability. Among all evaluated schedulers, SJF achieves the best overall performance, reducing median end-to-end latency by approximately 42% and P99 latency by approximately 16% relative to FIFO under sustained GPU contention. The results further indicate that scheduler selection has a greater impact on latency behavior than runtime calibration alone, while accurate workload characterization largely eliminates systematic estimation drift. This work contributes a reproducible framework for studying workload-estimation fidelity and QoS-aware scheduling in multi-tenant GPU inference systems.

LLM-based agents have demonstrated strong capabilities in solving complex tasks through multi-step reasoning and tool use. However, existing evaluation protocols primarily focus on task success, overlooking a critical aspect of agent behavior: execution efficiency. In practice, agent trajectories often contain redundant steps that consume substantial resources while contributing little to task completion. In this work, we propose and formulate a new research area: \textbf{redundant step detection} for agent trajectories. To support this initiative, we introduce \textbf{RedundancyBench}, a new benchmark that contains diverse tasks with carefully annotated trajectories, where each step is labeled according to its contribution to task completion. Using RedundancyBench, we develop and evaluate 3 representative methods to answer whether a step within trajectory is redundant or necessary. Our results show that even the best-performing method achieves only 24.88% score in detecting redundant steps, while some methods perform worse than random guessing. These results highlight the task's complexity and the need for further research in this area. \footnote{Code and dataset in this paper are both available in \href{https://anonymous.4open.science/r/RedundancyBench}{https://anonymous.4open.science/r/RedundancyBench}.}

In this paper, we introduce the first machine learning framework for predicting optimal processing times in Single-Level Tree Network (SLTN) architectures for the Divisible Load Theory (DLT) paradigm. Using a feedforward neural network(FNN) with 16 engineered features, we train a model on 100,000 synthetically generated configurations to predict optimal processing times without explicit formulation of DLT equations. The model achieves 97-99% accuracy (R-square factor) with mean absolute percentage error of 1-5%, demonstrating that neural networks can effectively learn complex load distribution relationships. Feature importance analysis reveals that the model implicitly captures DLT mathematical structure, including load conservation and simultaneous finishing constraints. With inference times under 1 millisecond, the approach serves as a viable option over traditional DLT computation, enabling applications in real-time scheduling, design space exploration, and cloud resource allocation. The method generalizes well across diverse system configurations (n=3 to 20, load size =1 to 100 GB) with consistent accuracy, though performance degrades slightly for very large or highly heterogeneous systems. This work demonstrates the feasibility of using machine learning to accelerate distributed computing optimization while maintaining near-optimal accuracy.

Computer-use agents (CUAs) automate tasks specified with natural language such as "order the cheapest item from Taco Bell" by generating sequences of calls to tools such as click, type, and scroll on a browser. Current implementations follow a sequential fetch-screenshot-execute loop where each iteration requires an LLM call, resulting in high latency and frequent errors from incorrect tool use. We present agent just-in-time (JIT) compilation, a system that compiles task descriptions directly into executable code that may include LLM calls, tool calls, and parallelization. Our approach comprises three components: (1) JIT-Planner, which generates multiple code plans, validates each against tool specifications, and selects the minimum-cost candidate; (2) JIT-Scheduler, which explores parallelization strategies via Monte Carlo cost estimation from learned latency distributions; and (3) an invariant-enforcing tool protocol specifying precondition and postcondition requirements to reduce the rate of incorrect tool use. Across five applications, JIT-Planner achieves $10.4\times$ speedup and 28$\%$ higher accuracy over Browser-Use, while JIT-Scheduler achieves $2.4\times$ speedup and 9% higher accuracy over OpenAI CUA.

Industrial asset operations workflows are latency-sensitive because a single user query may require coordination over sensor data, work orders, failure modes, forecasting tools, and domain-specific agents. We evaluate this problem on AssetOpsBench (AOB), an industrial agent benchmark whose plan-execute pipeline exposes repeated overhead from tool discovery, LLM planning, MCP tool execution, and final summarization. Existing LLM caching techniques such as KV-cache reuse and embedding-based semantic caching were designed for chatbot serving and break down when output validity depends on time, asset, or sensor parameters. We propose two complementary optimization layers for AOB plan-execute pipelines: a temporal semantic cache and a set of MCP workflow optimizations combining disk-backed tool-discovery caching and dependency-aware parallel step execution. MCP workflow optimizations corresponded to a 1.67x speedup and reduced median end-to-end latency by about 40.0% while the temporal-cache benchmark achieved a median of 30.6x speedup on cache hits. Beyond the speedup, our results expose a concrete failure mode of pure semantic caching for parameter-rich industrial queries, providing a critical analysis of how caching choices interact with evaluation correctness in MCP-backed agent benchmarks.

Skim is a speculative execution framework for web agents that exploits the predictable structure of purpose-built websites. Today's web-agent expense is not intrinsic to the tasks but a property of how agents are composed: frontier-model inference, browser rendering, and ReAct-style planning are applied to every step of every task regardless of complexity. Skim's key observation is that websites enforce stable URL patterns, answer formats, and task-to-trajectory mappings across queries of the same type, so most queries can bypass these heavyweight components entirely. An offline profiler captures these patterns once per site. At runtime, Skim matches each query to a template, synthesizes the destination URL, and extracts the answer with a small model. A lightweight verifier gates each fast-path output against the query and schema; rare misspeculations cascade to the full agent, warm-started by the fast path's final URL to preserve upstream trajectory progress. Across standard web-agent benchmarks paired with three backboneagents (WebVoyager, AgentOccam, BrowserUse), Skim reduces median per-task cost by 1.9x and latency by 33.4% with no accuracy loss.

Modernizing legacy COBOL systems remains difficult due to scarce expertise, large and long-lived codebases, and strict correctness requirements. Recent large language model (LLM)-based modernization systems increasingly rely on agentic workflows in which the model controls multi-step tool execution. However, it remains unclear whether delegating execution control to the LLM improves correctness, robustness, or efficiency in structured software engineering workflows. We present a controlled empirical study of deterministic and LLM-controlled orchestration for COBOL-to-Python modernization. Using a unified experimental framework, we hold the language models, prompts, tools, configurations, and source programs constant while varying only the execution control strategy. This isolates orchestration as the sole experimental variable. We evaluate both approaches using functional correctness, robustness across repeated stochastic runs, and computational efficiency. Across multiple models, deterministic orchestration achieves comparable computational accuracy to LLM-controlled orchestration while improving worst-case robustness and reducing performance variability across runs. Deterministic execution also reduces token consumption by up to 3.5x, leading to substantially lower operational cost. These results suggest that, in structured modernization workflows with explicit validation stages, fixed execution policies provide more stable and cost-efficient behavior than fully agentic orchestration without reducing translation quality.

Large language model (LLM)-based multi-agent systems have shown strong potential on complex tasks through agent specialization, tool use, and collaborative reasoning. However, most automated multi-agent system design methods still follow a one-shot paradigm: a workflow is optimized or selected before execution and then reused unchanged throughout the task. This static coordination strategy is ill-suited for long-horizon tasks whose subgoals, intermediate evidence, and information needs evolve over multiple execution stages. We propose EvoMAS, a framework for execution-time multi-agent workflow construction. EvoMAS formulates workflow construction as a meta-level sequential decision problem along a single task trajectory. At each stage, it constructs an explicit task state through a Planner-Evaluator-Updater pipeline and uses a learned Workflow Adapter to instantiate a stage-specific layered workflow from a fixed pool of candidate agents. The adapter is trained with policy gradients using sparse, verifiable terminal task success as the main supervision signal, while evaluator-based process reward is analyzed separately under very-hard sparse-reward settings. Experiments on GAIA, HLE, and DeepResearcher show that EvoMAS outperforms single-agent baselines and recent automated multi-agent workflow design methods. Our analyses further show that explicit task-state construction and learned workflow adaptation provide complementary benefits. Additional results indicate that process reward is most useful when terminal success is extremely sparse, and qualitative case studies illustrate that EvoMAS adapts agent coordination as the task state evolves.

Lifted classical planners operate directly on first-order planning tasks to avoid the computationally demanding grounding step. However, lifted planning is typically slower, as planners must repeatedly instantiate ground structures during search. Many core components of lifted classical planning, such as successor generation, axiom evaluation, task grounding, and delete-relaxed heuristics, have previously been studied through the lens of Datalog evaluation. We build upon this line of work and extend it by developing and analyzing an execution model with two levels of parallelism: rule-level parallelism and grounding parallelism. We further specialize this solver for planning-specific workloads with a grounder based on clique enumeration, which we extend to support semi-naive Datalog evaluation. Our experimental evaluation using greedy best-first search with the FF heuristic shows that our implementation already solves more tasks than the baselines on a single core, and the gap widens as additional cores are used. Moreover, on hard-to-ground tasks where on average 97.6% of the total runtime is spent in Datalog execution, the proposed execution model exhibits an average parallel fraction of 92.4%, while achieving up to a 6-fold speedup on 8 cores in practice.

Machine learning components are now central to AI-infused software systems, from recommendations and code assistants to clinical decision support. As regulations and governance frameworks increasingly require deleting sensitive data from deployed models, machine unlearning is emerging as a practical alternative to full retraining. However, unlearning introduces a software quality-assurance challenge: under realistic deployment constraints and imperfect oracles, how can we test that a model no longer relies on targeted information? This paper frames unlearning testing as a first-class software engineering problem. We argue that practical unlearning tests must provide (i) thorough coverage over proxy and mediated influence pathways, (ii) debuggable diagnostics that localize where leakage persists, (iii) cost-effective regression-style execution under query budgets, and (iv) black-box applicability for API-deployed models. We outline a causal, pathway-centric perspective, causal fuzzing, that generates budgeted interventions to estimate residual direct and indirect effects and produce actionable "leakage reports". Proof-of-concept results illustrate that standard attribution checks can miss residual influence due to proxy pathways, cancellation effects, and subgroup masking, motivating causal testing as a promising direction for unlearning testing.

Shampoo and its efficient variant, SOAP, employ structured second-moment estimations and have shown strong performance for training neural networks (NNs). In practice, however, Shampoo typically requires step-size grafting with Adam to be competitive, and SOAP mitigates this by applying Adam in Shampoo's eigenbasis -- at the cost of additional memory overhead from Adam in both methods. Prior analyses have largely relied on the Frobenius norm to motivate these estimation schemes. We instead recast their estimation procedures as covariance estimation under Kullback-Leibler (KL) divergence minimization, revealing a previously overlooked theoretical limitation and motivating principled redesigns. Building on this perspective, we develop $\textbf{KL-Shampoo}$ and $\textbf{KL-SOAP}$, practical schemes that match or exceed the performance of Shampoo and SOAP in NN pre-training while achieving SOAP-level per-iteration runtime. Notably, KL-Shampoo does not rely on Adam to attain competitive performance, eliminating the memory overhead introduced by Adam. Across our experiments, KL-Shampoo consistently outperforms SOAP, Shampoo, and even KL-SOAP, establishing the KL-based approach as a promising foundation for designing structured methods in NN optimization. An implementation of KL-Shampoo/KL-SOAP is available at https://github.com/yorkerlin/KL-Methods

Scheduled batch jobs are widely used on asynchronous computing platforms to execute enterprise applications such as promotional notifications and candidate pre-computation for recommender systems. Delivering or updating information at the right time is important for user experience and execution impact, yet providing a versatile, personalized execution time optimization solution across diverse product scenarios while maintaining reasonable infrastructure costs remains challenging. In this paper, we present a deployed system that serves billions of users daily, combining learning-to-rank with a "best time policy" for execution time selection. We describe the four-stage evolution of our approach: from heuristic peak-hour rules, to pointwise ML-based activity pattern predictions, to a linear signal assembler with globally fixed weights, and finally to a contextual ensemble learner that produces per-user adaptive fusion weights via a neural policy network trained with listwise learning-to-rank objectives. We further report the discovery of cross-use-case cannibalization effects and introduce a coordination system to mitigate the problem. Our production experiments demonstrate measurable improvements in both execution efficiency and downstream product impact. We share deployment lessons including failure analyses and design decisions accumulated over four years of operating this system at scale. To our knowledge, this represents the first ML-based multi-tenant execution time optimization system deployed across different product domains at industrial scale.