Computer Vision

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA_Dark and SHB_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

Artificial Intelligence (AI) is increasingly used to automate a variety of real-world computer vision (CV) applications, such as autonomous vehicle control, facial recognition, and security cameras. Recent research has shown that acoustic vibration can induce real physical motion in cameras, interfering with their internal stabilization mechanisms. Because the motion falls outside the conditions the stabilization system was designed to handle, the system introduces artifacts into the frame, causing AI-based CV models to misclassify, miss targets, or hallucinate objects. Previous work used ultrasonic frequencies (>20 kHz) to perform short-range attacks, which limits them to short distances due to the attenuation exhibited by high frequencies. In this work, we investigate acoustic attacks using lower frequencies in the audible range (<20 kHz), and we further expand our analysis to include how various image and object features are affected by the attacks. Specifically, we performed physical experiments to demonstrate the viability of our attacks on an off-the-shelf object detection model (YOLO11) by resonating a commercially available camera with various frequencies. Based on our results, we provide insights into several factors that make an AI CV system more vulnerable to these attacks, which could help inform the development of future mitigation strategies.

AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.

Counting living cells is an important step in many biological research workflows. Our collaborators at the Wellcome Sanger Institute study vital genes in humans via large scale saturation genome editing screening, which requires repeatedly counting cells a great number of times. Computer Vision based automation is crucial for high throughput and resource efficiency. In this work, we develop a regression-based deep learning computer vision algorithm to detect and count cells in phase-contrast microscopy images. To reduce annotation effort, which in practice often becomes a bottleneck, we focus on counting cells only using sparse point annotations, which are fast and easy to acquire. By comparison to state-of-the-art 0-shot methods, we show that regression-based counting is a promising alternative in low data regimes. Through developing methods to automatically count living cells in microscopy images, we contribute to valuable research on the human genome. The code is available at https://github.com/beijn/cellnet.

Vehicle body type is a significant determinant of cyclist injury severity in overtaking crashes, yet automated tools for classifying vehicles into injury-risk-relevant categories from naturalistic roadway video do not exist in the open literature. Standard object detection benchmarks provide only coarse vehicle labels (car, truck, bus, motorcycle), while existing fine-grained recognition systems are trained on controlled imagery and lack evaluation for deployment robustness across recording sites. This paper presents an open-source two-stage computer vision pipeline combining a pre-trained RT-DETR detector for coarse vehicle localization with a fine-tuned Vision Transformer (ViT-Base/16) for six-category body-type classification: passenger car, SUV, pickup truck, minivan, large van, and commercial truck. A confidence-based abstention mechanism withholds Stage 2 predictions when softmax output falls below 0.60, producing unknown labels rather than silent misclassifications. Evaluated on 3,805 annotated overtaking events from a bicycle-lane corridor in Ann Arbor, Michigan (in-distribution), the pipeline achieved 0.94 accuracy with per-class F1 scores from 0.91 (minivan) to 0.97 (SUV). On an independent out-of-distribution evaluation of 311 events from an open cycling dataset without retraining, accuracy was 0.89. Three of four well-represented categories maintained F1 at or above 0.90 under domain shift. The largest degradation was observed for minivan (F1 = 0.72), driven by abstention rate rising from 2.4% to 25.0% rather than active misclassification, consistent with the mechanism propagating genuine model uncertainty. The full pipeline, including inference scripts, training code, evaluation utilities, and model weights, is released as open-source software to support reproducibility and reuse across roadside video archives and cycling safety research.

Multi-view object association is an important computer vision problem that underlies many multi-camera perception tasks. While this task is naturally formulated as a constrained one-to-one matching problem, recent works heavily rely on pairwise ranking metrics like AP and FPR-95 for model evaluation. We highlight a fundamental mismatch between these metrics and the actual assignment objective. Theoretically, we show that AP and FPR-95 can be imperfect even when the assignment is already correct, and that Sinkhorn-based normalization can make them perfect. Conversely, optimal pairwise ranking can still lead to incorrect assignments. We validate this mismatch in practice by using our Sinkhorn-based normalization as a controlled post-processing stress test. We show that optimizing just a few post-processing parameters significantly boosts AP and FPR-95 without corresponding improvements in assignment-level metrics such as ACC and IPAA.

Instruction-guided image editing is becoming a general interface for visual work, yet existing benchmarks still focus largely on narrow appearance edits and do not fully capture the diversity of real-image tasks in professional workflows. Here, we define instructional computer vision problem solving as a broader formulation of image editing: given a real input image and a natural-language instruction, a system must produce an edited output that realizes the requested transformation while satisfying explicit preservation, geometric, physical, and usability constraints. We introduce CV-Arena, an open benchmark designed to evaluate this capability at professional scales. CV-Arena contains 12K high-resolution real-image instruction pairs spanning 16 instruction-based visual task types, constructed using CogRetriever, a dual-track retrieval-and-curation pipeline that combines targeted web search, agentic query refinement, verification, and traceability. To evaluate models at scale while preserving human fidelity, we propose Active Elo, a human-AI collaborative preference protocol that leverages CV-Judge, a logic-gated, multi-dimensional VLM evaluator, to reject clear failures and resolve high-confidence comparisons; and to route close, high-quality comparisons to expert raters. Mixed human and AI supervision is then aggregated through reliability-weighted Elo updates. Our comprehensive evaluation of 21 systems, including proprietary, open-source, and agentic models, on CV-Arena reveals persistent gaps in instruction adherence, physical reasoning, structural control, and fine-grained detail preservation. We further develop CV-Agent, a lightweight agentic model that combines planning, editing, and verification, and demonstrate that closed-loop reasoning is a promising direction for professional-grade instruction-following visual editing.

Deploying computer vision models in Warehouse Facilities traditionally requires extensive resources for camera mounting, image collection, annotation, training, and deployment - a process often needing repetition in each new environment due to camera mounting constraints and environmental variability. This paper explores an innovative approach to streamline this process by conducting the standard procedure solely in a laboratory setting, focusing on vertical material handling systems and anomaly detection in forks of the systems. Through extensive experimentation, we have found that combining optimal camera placement, strategic image triggering, careful model selection and model ensemble enables effective generalization from laboratory conditions to diverse warehouse facilities environments, potentially transforming warehouse automation implementation by simplifying warehouse facilities deployment to just camera mounting, image collection, and model deployment, thereby saving significant resources and time typically spent on image annotation and model retraining. This is an experimental research study and not a production deployment.

The aquaculture industry needs to address several challenges to secure sustainable seafood production that can serve an increasing global demand. One major challenge is to ensure good fish health and acceptable welfare during production since the improvement of fish welfare is of vital importance in current and future production systems. In this study, this is addressed by developing and implementing methods to identify fish behaviors in response to intrusive objects both on individual and on a group basis. A novel approach for detecting, tracking, and estimating the 3D position of individual fish has thus been developed, and specifically designed to track the caudal fins of farmed fish in industrial sea cages. The tracking data was subjected to a novel stereo-vision method adapted to estimate fish positions, velocities, accelerations, and turning and pitch angles. Datasets obtained from industrial-scale fish farms were then analyzed to identify the impact of structures of varying shapes, sizes, and colors on fish behavior. The method was trained using manually labeled caudal fins, and used YOLOv8 with ByteTrack as an object detector and tracker, SuperGlue for matching detections in the left and right frames, and triangulation to reconstruct the 3D positions of the fish. Different image pre-processing and augmentation methods for enhancing object detection accuracy were tested and their performance compared, while RAFT-Stereo was tested for depth estimation purposes. The obtained results both validate the method's performance against previous research efforts, and demonstrate the novelty and potential of this method in providing more insight into behavioral dynamics in sea-cages.

Video-Language Models (VLMs) have demonstrated impressive multi-modal reasoning capabilities across diverse computer vision applications. However, these VLMs are task-specific and assume that both video and language inputs are complete. However, real-world VLM applications might face challenges due to deactivated sensors (e.g., cameras are unavailable due to data privacy), yielding modality-incomplete data and leading to inconsistency between training and testing data. While straightforward incomplete input can boast training generalization-ability and lead to training failure, its potential risks to VLMs regarding safety and trustworthiness have been largely neglected. To this end, we make the first attempt to propose a unified incomplete video-language model to process the incomplete multi-modal inputs. Extensive experimental results show that our method can serve as a plug-and-play module for previous works to improve their performance in various multi-modal tasks.

Multilevel Image thresholding is an important preprocessing algorithm in computer vision applications nowadays. Since most common thresholding methods take the desired count of thresholds as input by the user, thresholding methods that automatically determines a suitable count of thresholds from the input image itself are advantageous. In this article, a novel thresholding method based on a dynamic programming algorithm and a modification of Minimum Error Thresholding (MET) criterion is thoroughly presented. An empirical statistical study is performed to pinpoint why this proposed method is superior. Moreover, an extended comparison between this proposed method and other state-of-the-art methods is performed on a comprehensive set of natural, satellite and medical test images. The numerical results show that the proposed MET-DP method takes much less time than traditional dynamic programming thresholding methods when the number of thresholds is high. The proposed method can detect a suitable count of thresholds for most of tested images of different types. However, traditional methods that take the count of thresholds as input produce thresholded images of higher structural similarity index measure (SSIM) and peak signal-to-noise ratio (PSNR) values than MET-DP. Source code can be found on https://w3id.org/met-dp/article1-code

In this paper, we address the problem of detecting small, dense, and overlapping objects, a major challenge in computer vision. Our focus is on reviewing proposed methods based on deep learning supervised approaches. We provide a detailed comparison of these systems on a new dataset of more than 10k images and 120k instances, highlighting their performance, accuracy, and computational efficiency in the industrial recycling process use case. Through this comparative analysis, we identify the most reliable systems currently available and the specific challenges they are designed to tackle. Furthermore, we explore the benefits of data augmentation and synthetic images. Based on our analysis, we also propose potential future directions and innovative solutions that could enhance the effectiveness of small, dense and overlapped object detection systems. The scope of our investigations encompasses object detection, length measurement, and anomaly detection within the context of the recycling process. The anomaly detection strategy is robust against variations in image resolution and zoom levels, ensuring reliable performance in industrial applications. The repository of the proposed dataset, methods and evaluation codes can be found at: https://github.com/o-messai/SDOOD

Structure-from-Motion -- the process of simultaneously estimating camera poses and 3D scene structure from a collection of images -- remains a central challenge in computer vision, with many open problems yet to be solved. Recent advances in feedforward 3D reconstruction have made significant strides in overcoming persistent failure cases of classical SfM methods, particularly in scenarios characterized by low texture, limited overlap, and symmetries. However, while feedforward approaches excel in these challenging conditions, they often face limitations regarding scalability, accuracy, or robustness, and typically fall short of classical methods in standard reconstruction settings. In this work, we systematically analyze these limitations and propose a new Structure-from-Motion pipeline by combining the respective strengths of classical and feedforward methods. Extensive experiments across multiple datasets show the benefits of our approach, achieving state-of-the-art results across a wide range of scenarios. We share our system as an open-source implementation at https://github.com/colmap/gluemap.

Achieving high levels of surgical skill through effective training is essential for optimal patient outcomes. Automated, data-driven skill assessment holds significant potential to improve surgical training. While machine learning-based methods are increasingly popular for assessing skills in minimally invasive surgery, their application to open surgery remains limited. We present the results of a dedicated MICCAI challenge designed to benchmark and advance vision-based skill assessment in open surgery. The challenge dataset comprises videos of an open suturing training task recorded with a static GoPro camera in a dry-lab setting, with instrument trajectories available in addition to the primary video modality. The OSS Challenge was hosted over two consecutive years, comprising two and three independent tasks, respectively: (1) classifying skill level into four classes, (2) predicting the full Objective Structured Assessment of Technical Skills across eight categories, and (3) tracking hands and surgical tools. Participants submitted diverse solutions including deep learning-based video models, tracking-driven methods, and hybrid approaches. General-purpose spatiotemporal video models consistently achieved the strongest performance, though conceptually diverse approaches reached competitive levels when well-executed. Predicting fine-grained OSATS scores remains challenging but benefits substantially from increased training data. Keypoint tracking proves difficult given frequent occlusions and out-of-frame instances, limiting current applicability for motion-based skill analysis. This work benchmarks innovative and diverse solutions for surgical skill assessment, highlighting both the promise and current limitations of video-based evaluation in open surgery and identifying critical directions for advancing automated skill assessment toward clinical impact.

Vision-based learning from demonstrations has achieved remarkable success in enabling robots to perform manipulation tasks and high-level semantic reasoning, yet it remains insufficient for complex, contact-rich manipulation. While there is broad agreement that tactile sensing improves manipulation, there is no empirical guidance on which tactile sensors are best suited for which manipulation tasks. In this paper, we provide a systematic, task-driven evaluation of tactile sensors for robot manipulation and propose a framework for selecting and evaluating sensors based on manipulation policy performance. Separate manipulation policies are trained for tactile sensors of four distinct modalities: visual, acoustic, magnetic, and resistive, across three tasks: pick-and-place with unknown mass, object reorientation, and plug insertion. For each task, an analysis of how sensor properties such as spatial resolution, shear sensing, and tactile representation, and the inherent material friction affect task performances is done. Rather than tactile sensing being universally beneficial in the same way, our results show that the usefulness of tactile information depends strongly on sensor modality, material properties, and the specific manipulation tasks. All of the tactile sensors, code, data, and hardware setup will be publicly available on the project website.

Machine unlearning aims to remove the contribution of designated training data from a trained model while preserving performance on the remaining data. Existing work mainly focuses on single-task settings, whereas modern models often operate in multi-task setups with shared backbones, where removing supervision for one task or instance can unintentionally affect others. We introduce multi-task unlearning with two settings: full-task unlearning, which removes a target instance from all tasks, and partial-task unlearning, which removes supervision only from selected tasks. We show that shared parameters couple the forget and retain sets, causing task-level interference on non-target tasks and instance-level interference on other instances. To address this issue, we propose an interference-aware framework that combines task-aware gradient projection, which constrains updates within task-specific subspaces, with instance-level gradient orthogonalization, which reduces conflicts between forget and retain signals. Experiments on two multi-task computer vision benchmarks across five tasks show that our method achieves effective unlearning while maintaining strong generalization, reducing UIS compared with the strongest baseline by 30.3% in full-task unlearning and 52.9% in partial-task unlearning.

Analyzing microscopy images to extract biological object properties (e.g., their morphological organization, temporal dynamics, and population density) is fundamental to various biomedical research. Yet conducting this manually is costly and time-consuming. Though deep learning-based approaches have been explored to automate this process, the substantial diversity of microscopy analysis settings in practice (including variations of biological object types, sample processing protocols, imaging equipment, and analysis tasks, etc.) often renders them ineffective. As a result, these approaches typically require extensive adaptation for different settings, which, however, can impose burdens that are often practically unsustainable for laboratories, forcing biomedical researchers to still commonly rely on manual analysis, thereby severely bottlenecking the pace of biomedical research progress. This situation has created a pressing and long-standing need for a reliable and broadly applicable microscopy image analysis tool, yet such a tool is still missing. To address this gap, we present the first ready-to-use microscopy image analysis framework, MicroscopyMatching, that can reliably perform key analysis tasks (including segmentation, tracking, and counting) across diverse microscopy analysis settings. From a fundamentally different perspective, MicroscopyMatching reformulates diverse microscopy image analysis tasks as a unified matching problem, effectively handling this problem by exploiting the robust matching capability from pre-trained latent diffusion models.

With the rapid evolution of computer vision, vision-based methodologies for water level and river surface velocity estimation have reached significant maturity. Compared to traditional sensing, these techniques offer superior interpretability, automated data archiving, and enhanced system robustness. However, challenges such as environmental sensitivity, limited precision, and complex site calibration persist. This work proposes an integrated framework that synergizes state-of-the-art (SOTA) vision models with statistical modeling. By leveraging physical priors and robust filtering strategies, we improve the accuracy of water level detection and flow estimation. Code will be available at https://github.com/sunzx97/Vision_Based_Water_Level_and_Flow_Estimation.git

Computing a minimum $s$-$t$ cut in a graph is a solution to a wide range of computer vision problems, and is often done using the Boykov-Kolmogorov (BK) algorithm. In this paper, we revisit the BK algorithm from both a theoretical and practical point of view. We improve the analysis of the time complexity of the BK algorithm to $O(mn|C|)$ and propose a new algorithm, the fast and compact BK (fcBK) algorithm, with a time complexity of $O(m|C|)$, where $m$, $n$, and $|C|$ are the number of edges, number of vertices, and the capacity of the cut, respectively. We additionally propose a compact graph representation that allows our implementation to find a minimum $s$-$t$ cut in a graph with upwards of $10^9$ vertices and $10^{10}$ edges on a machine with 128 GB of memory. We find our implementation of the BK algorithm to be the fastest available implementation of the BK algorithm when evaluating on a comprehensive set of benchmark datasets, highlighting the importance of memory-efficient implementations. We make our implementations publicly available for further research and implementation development within minimum $s$-$t$ cut algorithms.

Jigsaw puzzle solving has been an increasingly popular task in the computer vision research community. Recent works have utilized cutting-edge architectures and computational approaches to reassemble groups of pieces into a coherent image, while achieving increasingly good results on well established datasets. However, most of these approaches share a common, restricting setting: operating solely on strictly square puzzle pieces. In this work, we introduce GAP, a set of novel jigsaw puzzles datasets containing synthetic, heavily eroded pieces of unrestricted shapes, generated by a learned distribution of real-world archaeological fragments. We also introduce PuzzleFlow, a novel ViT and Flow-Matching based framework for jigsaw puzzle solving, capable of handling complex puzzle pieces and demonstrating superior performance on GAP when compared to both classic and recent prominent works in this domain.

Quantifying fish community structure is essential for understanding biodiversity and ecosystem responses in a changing environment, yet existing survey methods provide limited high-frequency, quantitative observations. Conventional approaches, including catch-based methods, underwater visual censuses, and environmental DNA metabarcoding, either require intensive labor or lack reliable estimates of abundance and biomass. Here, we develop an automated framework for quantifying fish communities from underwater video using computer vision. Using videos acquired with a custom-made stereo camera system, the framework integrates deep learning-based fish identification, multi-object tracking, and 3D reconstruction to estimate species-level abundance and biomass. We applied the approach to a reef fish community over a 20-day period with hourly daytime observations, revealing dynamic fluctuations in species richness, abundance, and biomass associated with changes in species composition. By comparing fish communities estimated from visual census and environmental DNA surveys, we demonstrate that our method provides complementary strengths for continuous, non-invasive, and quantitative monitoring of consistently observed species. This approach provides a scalable foundation for long-term monitoring and advances the capacity to resolve fine-scale temporal dynamics in fish communities.

In the area of Intelligent Transportation Systems (ITS), fine-grained vehicle classification systems play an essential role. Recently, the authors have presented a novel vision-based classification approach in which standard end-to-end Convolutional Neural Networks (CNNs) have been decomposed into 1) a CNN-based detector for semantically strong vehicle parts, followed by 2) feature construction and 3) final classification by a decision tree. In contrast to conventional CNNs, this allows both easy extensibility to new vehicle categories - without the need to fully retrain the part detector - and an important step towards the interpretability of the model, removing partially the black-box nature inherent to CNNs. Here we present an important extension of this approach that now incorporates spatial awareness of the vehicle parts: while the feature construction 2) of the previous approach used a binary decision for each feature (present vs. absent), now a full spatial probability map is constructed to condition the presence of each individual part with respect to a given vehicle category. The classification is performed using a softmax regression approach for the overall vehicle probabilities. This method shows a considerably improved robustness against false (part-)detections, a point that is crucial for practical application. Comparative analyses with a state-of-the-art end-to-end CNN indicate that our part-based methods achieve comparable accuracy, effectively challenging the presumed trade-off between accuracy and explainability. This research represents a significant advance in vehicle classification for ITS and forms the basis for systems that combine high accuracy with intuitive interpretability.

Compared to RGB images, raw sensor data provides a richer representation of information, which is crucial for accurate recognition, particularly under challenging conditions such as low-light environments. The traditional Image Signal Processing (ISP) pipeline generates visually pleasing RGB images for human perception through a series of steps, but some of these operations may adversely impact the information integrity by introducing compression and loss. Furthermore, in computer vision tasks that directly utilize raw camera data, most existing methods integrate minimal ISP processing with downstream networks, yet the resulting images are often difficult to visualize or do not align with human aesthetic preferences. This paper proposes UniISP, a novel ISP framework designed to simultaneously meet the requirements of both human visual perception and computer vision applications. By incorporating a carefully designed Hybrid Attention Module (HAM) and employing supervised learning, the proposed method ensures that the generated images are visually appealing. Additionally, a Feature Adapter module is introduced to effectively propagate informative features from the ISP stage to subsequent downstream networks. Extensive experiments demonstrate that our approach achieves state-of-the-art performance across various scenarios and multiple datasets, proving its generalizability and effectiveness.

Railway track intrusions pose a critical safety challenge for Indian Railways, encompassing wildlife incursions and deliberate malicious obstructions. The December 2025 collision in Assam, in which seven elephants were killed by the Rajdhani Express, underscores the urgency of effective real-time detection. Existing solutions such as the optical fiber-based Gajraj system suffer from prohibitive costs ($1000/km) and high false alarm rates, limiting deployment to only 20 of India's 101 elephant corridors. This paper proposes NETRA, a cost-effective, internet-independent intrusion detection system deployed on Raspberry Pi Zero W and Raspberry Pi 4 edge platforms. NETRA employs probabilistic sensor fusion integrating a PIR motion sensor and an HC-SR04 ultrasonic distance sensor with a tunable threshold (tau_c = 0.65), enabling event-driven camera activation that reduces unnecessary visual processing by 52%. Upon confirmed intrusion, edge-AI classification using MobileNet-SSD (Pi Zero) or YOLOv5 ONNX (Pi 4) identifies threats including humans, large animals, and track obstructions. Confirmed threats are transmitted via LoRa (868 MHz) to alert the locomotive driver within 2.4 seconds end-to-end. Experimental evaluation across 113 motion events demonstrated 95% detection accuracy with zero false alarms through probabilistic fusion, compared to 85% for binary methods. Raspberry Pi 4 with YOLOv5 achieved 83.5% elephant F1-score, a 5.6x improvement over Pi Zero's heuristic approach (14.8%). LoRa communication achieved 100% packet delivery across 1-2 km in field trials. NETRA reduces deployment cost by 75% ($247/km vs $1000/km for Gajraj) while providing unified detection of both wildlife and obstruction threats.

Edge deep learning, a paradigm change reconciling edge computing and deep learning, facilitates real-time decision making attuned to environmental factors through the close integration of computational resources and data sources. Here we provide a comprehensive review of the current state of the art in edge deep learning, focusing on computer vision applications, in particular medical diagnostics. An overview of the foundational principles and technical advantages of edge deep learning is presented, emphasising the capacity of this technology to revolutionise a wide range of domains. Furthermore, we present a novel categorisation of edge hardware platforms based on performance and usage scenarios, facilitating platform selection and operational effectiveness. Following this, we dive into approaches to effectively implement deep neural networks on edge devices, encompassing methods such as lightweight design and model compression. Reviewing practical applications in the fields of computer vision in general and medical diagnostics in particular, we demonstrate the profound impact edge-deployed deep learning models can have in real-life situations. Finally, we provide an analysis of potential future directions and obstacles to the adoption of edge deep learning, with the intention to stimulate further investigations and advancements of intelligent edge deep learning solutions. This survey provides researchers and practitioners with a comprehensive reference shedding light on the critical role deep learning plays in the advancement of edge computing applications.

Organoids are complex, three dimensional, self-organizing cell cultures which manifest organ-like features and represent a powerful platform for studying human disease and developing treatment options. Organoid development is characterized by dynamic morphological and cellular organization, which mimic some aspects of organ development. To study these rapid changes over the course of organoid development, advanced imaging and analytical tools are critical to accurately monitor the trajectory of organoid growth and investigate disease processes. In this work, we focus on computer vision and machine learning techniques to automatically measure the size and shape of developing spheroids derived from pluripotent stem cells (iPSCs), which are typically the starting material for generating organoid cultures. To facilitate this task, we introduce a composite method that combines the Segment Anything Model (SAM), a general-purpose foundation model, with an existing domain-specific tool. This composite method is evaluated together with several existing tools by testing them on organoid image data and comparing with the results of manual image segmentation. We find that no single existing tool is able to segment the test images with sufficient accuracy across all test conditions, but the newly introduced composite method produces consistent and accurate results for all but a very small fraction of the most challenging images. Finally, we compare the accuracy of this method to the variability between manual segmentations by independent annotators (inter-observer variability) and find that by one measure it performs at the level of inter-observer variability and by others it performs very close to it.

Physical violence in public spaces is a significant public health concern, with minor incidents such as pushing often serving as precursors to more severe escalations. This research develops an automated system for the real-time detection of moderate physical violence, specifically pushing, in surveillance camera footage. The proposed solution integrates state-of-the-art computer vision models, utilizing YOLO11 and YOLO11-Pose for human detection and skeletal keypoint extraction. By calculating body inclination and joint angles between shoulders and hips, a Random Forest classifier was trained to distinguish between normal behavior and aggressive physical contact. The system's performance was evaluated through three progressive case studies representing increasing levels of difficulty. In controlled environments with frontal views, the model achieved a precision of 0.98. In the most challenging scenario, featuring high-altitude, steep-angle recordings from real-world surveillance infrastructure, the system maintained a precision of 0.72 despite significant perspective distortion and visual noise. These results demonstrate the feasibility of using skeletal analysis for early violence intervention in urban security contexts.

We introduce the package \texttt{EliminationTemplates} for the Macaulay2 computer algebra system, which provides tools for constructing automatic solvers for families of zero-dimensional radical ideals depending on algebraically independent parameters. This article provides a self-contained description of how elimination templates are constructed for such families and their specialization properties. Additionally, we describe the main functionality and datatypes provided by our package, and illustrate its usage on several examples, including applications from computer vision from which elimination templates originated.

EigenDecomposition (ED) is at the heart of many computer vision algorithms and applications. One crucial bottleneck limiting its usage is the expensive computation cost, particularly for a mini-batch of matrices in deep neural networks. Our previous work proposed a dedicated QR-based ED algorithm for batched small matrices (dim${<}32$). This short paper targets the limitation and proposes a batch-efficient Divide-and-Conquer based ED algorithm for larger matrices. The numerical test shows that for a mini-batch of matrices whose dimensions are smaller than $64$, our method can be much faster than the Pytorch SVD function.

Deep learning methods have proved highly effective for classification and image recognition problems. In this paper, we ask whether this success can be transferred to hypothesis testing: if a neural network can distinguish, for example, an image of a handwritten digit from another, can it also distinguish an "image of a sample" (such as a scatter plot) generated under a given statistical model from one generated outside that model? Motivated by this idea, we propose a novel procedure called deep-testing, which approaches the classical inferential problem of hypothesis testing through deep learning. More specifically, the test statistic is a classification map learned by a deep neural network from simulated data satisfying the null and alternative hypotheses, leveraging its strong discriminating power to construct a highly powerful test. As a proof of concept, we apply deep-testing to the problem of independence testing, arguably one of the most important problems in statistics. In a large-scale simulation study, deep-testing achieves the highest overall power against nineteen competing methods across a broad range of complex dependence structures, confirming the viability of the proposed approach.

Accurate fruit maturity identification is essential for determining harvest timing, as incorrect assessment directly affects yield and post-harvest quality. Although ripening is a continuous biological process, vision-based maturity estimation is typically formulated as a multi-class classification task, which imposes sharp boundaries between visually similar stages. To examine this limitation, we perform an annotation reliability study with two independent annotators on a held-out tomato dataset and observe disagreement concentrated near adjacent maturity stages. Motivated by this observation, we model maturity as a latent continuous variable and predict it probabilistically using a distributional detection head, converting the distribution into class probabilities through the cumulative distribution function (CDF). The proposed formulation maintains comparable performance to a standard detector under clean labels while better representing uncertainty. Furthermore, when controlled label noise is introduced during training, the probabilistic model demonstrates improved robustness relative to the baseline, indicating that explicitly modeling maturity uncertainty leads to more reliable visual maturity estimation.

To humans, a robin seems more like a bird than a bird seems like a robin, but does this asymmetry also hold for machine vision? Humans and modern vision models can match each other in accuracy while making systematically different kinds of errors, differing not in how often they fail, but in who gets mistaken for whom. We show these directional confusions reveal distinct inductive biases invisible to accuracy alone. Using matched human and deep neural network responses on a natural-image categorization task under 12 perturbation types, we quantify asymmetry in confusion matrices and link its organization to the geometry of the information--error trade-off - how efficiently, and how gracefully, a system generalizes under distortion. We find that humans exhibit broad but weak asymmetries across many class pairs, whereas deep vision models show sparser, stronger directional collapses into a few dominant categories. Robustness training reduces overall asymmetry magnitude but fails to recover this human-like distributed structure. Generative simulations further show that these two asymmetry organizations shift the trade-off geometry in opposite directions even at matched accuracy, explaining why the same scalar asymmetry score can reflect fundamentally different generalization strategies. Together, these results establish directional confusion structure as a sensitive, interpretable signature of inductive bias that accuracy-based evaluation cannot recover.

Purpose: Gaze-following, the task of inferring where individuals are looking, has been widely studied in computer vision, advancing research in visual attention modeling, social scene understanding, and human-robot interaction. However, gaze-following has never been explored in the operating room (OR), a complex, high-stakes environment where visual attention plays an important role in surgical workflow analysis. In this work, we introduce the concept of gaze-following to the surgical domain, and demonstrate its great potential for understanding clinical roles, surgical phases, and team communications in the OR. Methods: We extend the 4D-OR dataset with gaze-following annotations, and extend the Team-OR dataset with gaze-following and a new team communication activity annotations. Then, we propose novel approaches to address clinical role prediction, surgical phase recognition, and team communication detection using a gaze-following model. For role and phase recognition, we propose a gaze heatmap-based approach that uses gaze predictions solely; for team communication detection, we train a spatial-temporal model in a self-supervised way that encodes gaze-based clip features, and then feed the features into a temporal activity detection model. Results: Experimental results on the 4D-OR and Team-OR datasets demonstrate that our approach achieves state-of-the-art performance on all downstream tasks. Quantitatively, our approach obtains F1 scores of 0.92 for clinical role prediction and 0.95 for surgical phase recognition. Furthermore, it significantly outperforms existing baselines in team communication detection, improving previous best performances by over 30%. Conclusion: We introduce gaze-following in the OR as a novel research direction in surgical data science, highlighting its great potential to advance surgical workflow analysis in computer-assisted interventions.

Automated bacterial colony counting from images is an important technique to obtain data required for the development of vaccines and antibiotics. However, bacterial colonies present unique machine vision challenges that affect counting, including (1) small physical size, (2) object clustering, (3) high data annotation cost, and (4) limited cross-species generalisation. While FamNet is an established object counting technique effective for clustered objects and costly data annotation, its effectiveness for small colony sizes and cross-species generalisation remains unknown. To address the first three challenges, we propose ACFamNet, an extension of FamNet that handles small and clustered objects using a novel region of interest pooling with alignment and optimised feature engineering. To address all four challenges above, we introduce ACFamNet Pro, which augments ACFamNet with multi-head attention and residual connections, enabling dynamic weighting of objects and improved gradient flow. Experiments show that ACFamNet Pro achieves a mean normalised absolute error (MNAE) of 9.64% under 5-fold cross-validation, outperforming ACFamNet and FamNet by 2.23% and 12.71%, respectively.

The IEEE Low-Power Computer Vision Challenge (LPCVC) aims to promote the development of efficient vision models for edge devices, balancing accuracy with constraints such as latency, memory capacity, and energy use. The 2025 challenge featured three tracks: (1) Image classification under various lighting conditions and styles, (2) Open-Vocabulary Segmentation with Text Prompt, and (3) Monocular Depth Estimation. This paper presents the design of LPCVC 2025, including its competition structure and evaluation framework, which integrates the Qualcomm AI Hub for consistent and reproducible benchmarking. The paper also introduces the top-performing solutions from each track and outlines key trends and observations. The paper concludes with suggestions for future computer vision competitions.

The correlation between insect morphological traits and climate has been documented in physiological studies, but such studies remain limited by the time-consuming nature of the data analysis. In particular, the open source datasets often lack annotations of species' morphological traits, making dedicated annotations campaigns necessary; these efforts are typically local in scale and costly. In this paper, we propose a pipeline to identify and segment body parts of Odonates (dragonflies and damselflies) using deep neural networks, with the ultimate goal of extracting body parts' colouration. The pipeline is trained on a limited annotated dataset and refined with pseudo supervised data. We show that, by using open source images from citizen science platforms, our approach can segment each visible subject (Odonates) into head, thorax, abdomen, and wings and then extract a colour palette for each body part. This will enable large-scale statistical analysis of ecological correlations (e.g., between colouration and climate change, habitat loss, or geolocation) which are crucial for quantifying and assessing ecosystem biodiversity status.

Posture is a critical factor for beginning instrumental learners. Most students receive instruction only once a week, and during the intervals between lessons they have little or no feedback on their physical posture. As a result, posture often deteriorates, increasing the risk of musculoskeletal injury and inefficient technique. Recent advances in computer vision and machine learning make it possible to evaluate posture without the constant presence of a human expert. However, current solutions have been extremely limited in availability and convenience due to their reliance on computationally expensive hardware or multi-sensor setups. We present Cello Evaluator, a real-time postural feedback system for practicing cellists. Through this optimization for on-device computer vision inference, we provide access to cellist postural evaluation to anyone with a current generation Android phone and thus reduces the postural feedback voids within individual practice. To validate our mobile application, we conduct a heuristic evaluation consisting of cellist and UX experts. Overall feedback from the evaluation found the app to be user friendly and helpful.

Recently computer vision has seen advancements mainly thanks to Transformer-based models. However many non-Transformer methods are still doing well being a direct competition of Transformer-based models. This review tries to present a comprehensive taxonomy of such methods and organize these methods into categories like convolution-based models, MLP-based models, state-space-based and more. These methods are looked at in terms of how efficient they are, how well they scale, how easy they are to understand and how robust they are. A total of 40 papers were chosen for this study. The goal is to give a view of non-Transformer methods and find out what challenges and opportunities exist for future computer vision research.

Dehazing is a technique in computer vision for enhancing the visual quality of images captured in cloudy or foggy conditions. Dehazing helps to recover clear, high-quality images from haze-affected remote sensing data. In this study, we introduce IncepDeHazeGAN, a novel Generative Adversarial Network (GAN) involving Inception block and multi-layer feature fusion for the task of single-image dehazing. Utilizing the Inception block allows for multi-scale feature extraction. On the other hand, the multi-layer feature fusion design achieves efficient reuse of features as the features extracted at different convolution layers are fused several times. Grad-CAM XAI technique has been applied to our network, highlighting the regions focused on by the network for dehazing and its adaptation to different haze conditions. Experiments demonstrate that our network achieves state-of-the-art results in several datasets.

The reliability of a machine vision system for autonomous driving depends heavily on its training data distribution. When a vehicle encounters significantly different conditions, such as atypical obstacles, its perceptual capabilities can degrade substantially. Unlike many domains where errors carry limited consequences, failures in autonomous driving translate directly into physical risk for passengers, pedestrians, and other road users. To address this challenge, we explore Visual Anomaly Detection (VAD) as a solution. VAD enables the identification of anomalous objects not present during training, allowing the system to alert the driver when an unfamiliar situation is detected. Crucially, VAD models produce pixel-level anomaly maps that can guide driver attention to specific regions of concern without requiring any prior assumptions about the nature or form of the hazard. We benchmark eight state-of-the-art VAD methods on AnoVox, the largest synthetic dataset for anomaly detection in autonomous driving. In particular, we evaluate performance across four backbone architectures spanning from large networks to lightweight ones such as MobileNet and DeiT-Tiny. Our results demonstrate that VAD transfers effectively to road scenes. Notably, Tiny-Dinomaly achieves the best accuracy-efficiency trade-off for edge deployment, matching full-scale localization performance at a fraction of the memory cost. This study represents a concrete step toward safer, more responsible deployment of autonomous vehicles, ultimately improving protection for passengers, pedestrians, and all road users.

Polarimetric imaging enables advanced vision applications such as normal estimation and de-reflection by capturing unique surface-material interactions. However, existing applications (alternatively called downstream tasks) rely on datasets constructed by naively regrouping raw measurements from division-of-focal-plane sensors, where pixels of the same polarization angle are extracted and aligned into sparse images without proper demosaicking. This reconstruction strategy results in suboptimal, incomplete targets that limit downstream performance. Moreover, current demosaicking methods are task-agnostic, optimizing only for photometric fidelity rather than utility in downstream tasks. Towards this end, we propose PolarAPP, the first framework to jointly optimize demosaicking and its downstream tasks. PolarAPP introduces a feature alignment mechanism that semantically aligns the representations of demosaicking and downstream networks via meta-learning, guiding the reconstruction to be task-aware. It further employs an equivalent imaging constraint for demosaicking training, enabling direct regression to physically meaningful outputs without relying on rearranged data. Finally, a task-refinement stage fine-tunes the task network using the stable demosaicking front-end to further enhance accuracy. Extensive experimental results demonstrate that PolarAPP outperforms existing methods in both demosaicking quality and downstream performance. Code is available upon acceptance.

Human-machine interfaces in industrial automation need sensing modules that monitor operator actions and physiological state. This is important in factories, vehicles, machinery cabins, and human-robot collaboration, where workload, stress, fatigue, or reduced attention can affect safety. RGB monitoring is limited by low light, shadows, and privacy concerns, while thermal infrared imaging captures skin temperature dynamics without visible illumination. This paper studies thermal video as a contactless computer vision modality for estimating electrodermal activity (EDA), heart rate (HR), and breathing rate (BR), with the goal of supporting adaptive human-machine interfaces and operator-state awareness. We propose a signal-processing pipeline that tracks facial regions, aggregates thermal signals, and separates slow sudomotor trends from faster cardiorespiratory components. HR is estimated using orthogonal matrix image transformation (OMIT) across multiple facial regions, while BR is estimated from nasal and cheek thermal signals using spectral peak detection. We characterize 288 ROI-method configurations against contact references with lag-tolerant metrics using 31 sessions from the public SIMULATOR STUDY 1 (SIM1) driver monitoring dataset. The best fixed EDA configuration reaches a mean absolute correlation of $0.40 \pm 0.23$ against palm EDA, with individual sessions reaching $0.89$. BR estimation achieves $3.1 \pm 1.1$ bpm mean absolute error, while HR estimation yields $13.8 \pm 7.5$ bpm MAE, limited by the $7.5$ Hz thermal camera frame rate. The results show that thermal video provides useful respiratory and sudomotor cues, while revealing limitations caused by ROI selection, polarity changes, latency, and subject variability. These findings provide baseline design guidance for thermal computer vision as an auxiliary sensing layer in adaptive industrial HMI systems.

Single Image Super-Resolution (SISR) is a fundamental computer vision task that aims to reconstruct a high-resolution (HR) image from a low-resolution (LR) input. Transformer-based methods have achieved remarkable performance by modeling long-range dependencies in degraded images. However, their feature-intensive attention computation incurs high computational cost. To improve efficiency, most existing approaches partition images into fixed groups and restrict attention within each group. Such group-wise attention overlooks the inherent asymmetry in token similarities, thereby failing to enable flexible and token-adaptive attention computation. To address this limitation, we propose the Individualized Exploratory Transformer (IET), which introduces a novel Individualized Exploratory Attention (IEA) mechanism that allows each token to adaptively select its own content-aware and independent attention candidates. This token-adaptive and asymmetric design enables more precise information aggregation while maintaining computational efficiency. Extensive experiments on standard SR benchmarks demonstrate that IET achieves state-of-the-art performance under comparable computational complexity.

The visible parts of a scene are determined by occlusion among overlapping surfaces. Here we consider "dead leaves" models, which replicate this by independently sampling objects ("leaves") with position, shape, color, and texture and layering them until the image is covered. Building on prior theory, we present a self-contained framework that rigorously defines the dead leaves model and derives an analytical Bayesian ideal observer for partitioning finite pixel sets. The longest part of the paper spans the derivation of the prior probability, which elevates the observer beyond pixel-similarity methods by incorporating geometric information. These computations are practical only for small pixel sets (up to 9-10 pixels). We emphasize accessibility through step-by-step derivations, extensive visualizations, and examples. We empirically evaluate three tractable observers (prior-only, likelihood-only, and the full ideal observer), plus a random baseline on 108 dead leaves image datasets varying in texture intensity, leaf size, and image size. Likelihood-only performance falls with increasing texture intensity and image size. Prior-only performance falls with decreasing leaf size and increasing maximal image dimension. All model-based observers strongly outperform the random baseline, and the ideal observer consistently outperforms the others by combining both information sources. The model provides a principled upper bound on segmentation performance for limited pixel sets, enabling comparisons with human observers and algorithms.

In many machine learning problems, there may exist multiple models that achieve nearly identical predictive performance while relying on fundamentally different internal logic. However, standard training procedures produce a single model, offering no practical way to explore alternatives that may better suit downstream needs. The set of these equally accurate models is known as the Rashomon set. Exploring the Rashomon set is particularly challenging in large and complex hypothesis spaces, such as Concept Bottleneck Models (CBMs), which are widely used in computer vision to make predictions through intermediate, human-understandable concepts. In this paper, we provide a method for efficiently exploring the Rashomon set of CBMs. Our framework introduces a specialized parallel parameter-efficient adaptation module, combined with a checkpointing scheme and a concept diversity objective, to generate multiple equally accurate CBMs from a single training process. Empirical results show that our method finds models with better diversity than baselines while using much less memory. We further demonstrate that access to these diverse yet accurate CBMs enables trustworthy model selection, resolution of inter-class confusion, and reliable abstention in decision-making.

This paper presents a comprehensive overview of the Ultralytics YOLO family, emphasizing architectural evolution, benchmarking, deployment, and emerging directions from YOLOv5 through YOLO27. The review begins with YOLO27 (or YOLOv27), which introduces a scale-adaptive dual-architecture strategy: compact YOLO27n/s detectors employ streamlined CNNs with dual-scale prediction, strengthened high-resolution features, foreground-alignment supervision, and conventional or NMS-free inference, whereas YOLO27m/l adopt query-based transformer decoding for native NMS-free detection. YOLO27l further incorporates an UltraViT backbone with deep-stage self-attention for global-context modeling. Preliminary COCO results span 42.3-60.4 mAP at 640-pixel resolution and 0.62-2.32 ms TensorRT 11 FP16 latency, with YOLO27l reaching 61.2 mAP at 800 pixels. The evolution is subsequently traced through YOLO26, including DFL removal, Progressive Loss Balancing, Small-Target-Aware Label Assignment, MuSGD optimization, and NMS-free inference; YOLO11, emphasizing efficiency and task integration; YOLOv8, introducing decoupled anchor-free detection; and YOLOv5, which established the modular PyTorch-based Ultralytics ecosystem. Comparative benchmarking examines accuracy, precision, recall, F1-score, mAP, latency, and computational complexity alongside representative contemporary detectors. The review further examines detection, segmentation, depth, classification, pose, oriented detection, tracking, export, quantization, and deployment across robotics, agriculture, surveillance, and manufacturing. Finally, challenges involving dense scenes, CNN-Transformer integration, open-vocabulary perception, domain generalization, and hardware-aware optimization are discussed as directions for future YOLO systems.

Gas leaks pose severe risks to human health and industrial safety. However, accurate and timely monitoring of gas leaks remains a major challenge. Existing vision-based methods using infrared (IR) imagery are limited by the inherently blurry and non-rigid nature of leak plumes, which reduces detection reliability and precision. To overcome these limitations, this paper proposes a Joint Vision-Language Gas leak Segmentation (JVLGS) framework that integrates the complementary strengths of visual and textual modalities to enhance gas leak segmentation. Recognizing that gas leaks are sporadic and many video frames contain no leakage, JVLGS incorporates an adaptive postprocessing module to effectively suppress false positives caused by noise and non-target objects-a common limitation of existing approaches. Extensive experiments across diverse industrial scenarios demonstrate that JVLGS significantly outperforms state-of-the-art gas leak segmentation methods. Furthermore, it achieves consistently strong performance under both supervised and few-shot learning settings, whereas competing methods typically perform well in only one setting or underperform in both.

Reasoning is a hallmark of human intelligence, enabling adaptive decision-making in complex unfamiliar scenarios. In contrast, machine intelligence remains bound to training data, unable to dynamically refine solutions at inference. While recent advances have explored machine reasoning - trading inference-time compute for improved performance - they focus on verbal domains such as mathematical problem-solving where explicit rules govern step-by-step solution generation. Many tasks lack sufficient labelled data and require alternative performance improvement mechanisms, such as inference-time compute. Here we present a paradigm for machine reasoning in vision, enabling performance improvements with increasing thinking time (inference-time compute), even with limited labelled data. Our approach is inspired by dual-process theories of human cognition, integrating a fast-thinking System I module for generating and verifying solutions in familiar tasks, with a slow-thinking System II module that iteratively refines predictions using self-play reinforcement learning, even when task-specific data is limited. This paradigm involves proposing, competing over, and refining solutions until convergence. We demonstrate that extended inference-time compute yields superior performance compared to large-scale supervised learning, foundation models, and human experts in vision tasks. These include computer-vision benchmarks and cancer localisation across five organs, highlighting the potential of inference-time compute for data-scarce problems.

Establishing semantic correspondence is a challenging task in computer vision, aiming to match keypoints with the same semantic information across different images. Benefiting from the rapid development of deep learning, remarkable progress has been made over the past decade. However, a comprehensive review and analysis of this task remains absent. In this paper, we present the first extensive survey of semantic correspondence methods. We first propose a taxonomy to classify existing methods based on the type of their method designs. These methods are then categorized accordingly, and we provide a detailed analysis of each approach. Furthermore, we aggregate and summarize the results of methods in literature across various benchmarks into a unified comparative table, with detailed configurations to highlight performance variations. Additionally, to provide a detailed understanding on existing methods for semantic matching, we thoroughly conduct controlled experiments to analyse the effectiveness of the components of different methods. Finally, we propose a simple yet effective baseline that achieves state-of-the-art performance on multiple benchmarks, providing a solid foundation for future research in this field. We hope this survey serves as a comprehensive reference and consolidated baseline for future development. Code is publicly available at: https://github.com/Visual-AI/Semantic-Correspondence.

The increasing accessibility of radiometric thermal imaging sensors for unmanned aerial vehicles (UAVs) offers significant potential for advancing AI-driven aerial wildfire management. Radiometric imaging provides per-pixel temperature estimates, a valuable improvement over non-radiometric data that requires irradiance measurements to be converted into visible images using RGB color palettes. Despite its benefits, this technology has been underutilized largely due to a lack of available data for researchers. This study addresses this gap by introducing methods for collecting and processing synchronized visual spectrum and radiometric thermal imagery using UAVs at prescribed fires. The included imagery processing pipeline drastically simplifies and partially automates each step from data collection to neural network input. Further, we present the FLAME 3 dataset, the first comprehensive collection of side-by-side visual spectrum and radiometric thermal imagery of wildland fires. Building on our previous FLAME 1 and FLAME 2 datasets, FLAME 3 includes radiometric thermal Tag Image File Format (TIFFs) and nadir thermal plots, providing a new data type and collection method. This dataset aims to spur a new generation of machine learning models utilizing radiometric thermal imagery, potentially trivializing tasks such as aerial wildfire detection, segmentation, and assessment. A single-burn subset of FLAME 3 for computer vision applications is available on Kaggle with the full 6 burn set available to readers upon request.

This paper provides a consistent and extensive evaluation of state-of-the-art filtering and refinement methods on common image matching pipelines. Unlike previous comparisons, the designed benchmark also takes into account the more general, real, and practical cases where camera intrinsics are unavailable. Moreover, a novel and effective strategy combining non-deep traditional computer vision approaches based on planar constraints and cross correlation is presented. Experimental analysis provides several insights for current application design and future research directions. In particular, the choice of a proper evaluation protocol discloses the effective differences within the compared solutions which otherwise would tend to flatten. Moreover, the proposed classical algorithmic approach is competitive with recent deep methods. Besides providing robust baseline using traditional computer vision for the evaluation of deep-based methods, this knowledge is useful to improve and better understand the deep image matching architectures. On one hand, geometry-based filtering is effective in presence of outliers without degrading already robust deep pipelines; on the other hand cross-correlation refinement is valid in the case of corner-like keypoints and allows to not directly discard inaccurate matches by default in deep pipelines but to retain and refine them for achieving a better coverage of the scene.

Efficiently merging several models fine-tuned for different tasks, but stemming from the same pretrained base model, is of great practical interest. Despite extensive prior work, most evaluations of model merging in computer vision are restricted to image classification using CLIP, where different classification datasets define different tasks. In this work, our goal is to make model merging more practical and show its relevance on challenging scenarios beyond this specific setting. In most vision scenarios, different tasks rely on trainable and usually heterogeneous decoders. Differently from previous studies with frozen decoders, where merged models can be evaluated right away, the non-trivial cost of decoder training renders hyperparameter selection based on downstream performance impractical. To address this, we introduce the task alignment proxy, and show how it can be used to speed up hyperparameter selection by orders of magnitude while retaining performance. Equipped with the task alignment proxy, we extend the applicability of model merging to multi-task vision models beyond CLIP-based classification. Project page: https://europe.naverlabs.com/task-alignment

Verifying that manufactured batches of rotary milling tools, also known as carbide burrs, conform to production order sheets remains a largely manual and error-prone quality assurance task. Automating this process with computer vision faces a critical cold-start constraint since no labelled imagery from the deployment environment is available, leaving manufacturer catalogue photography as the sole source of supervision. We investigate how far catalogue supervision can support an industrial recognition pipeline under domain shift, explicitly measuring the gap between catalogue separability and performance on held-out field photographs. Our findings reveal three key insights. First, off-the-shelf frozen feature extractors do not reliably separate the two task attributes, head shape and tooth profile, motivating targeted representation learning. Second, metric learning produces near-perfect unsupervised cluster discovery on catalogue images (adjusted Rand index 0.94--0.97), yet on field photographs under half of the accuracy gained from training survives. Third, the largest transfer gains do not come from model scale or representation complexity, but from simple changes that reduce domain sensitivity: converting images to grayscale (+0.22) and constraining retrieval against the known order sheet (+0.11). We therefore treat catalogue photography as a useful cold start rather than a deployment-ready training domain, and provide empirical baselines and an evaluation protocol for catalogue-to-field transfer in precision tool manufacturing.