Resource-Constrained Edge Devices

Low-bitrate speech communication on resource-constrained edge devices remains challenging due to stringent computational, memory, and bandwidth constraints. We present TinyCall, a lightweight neural audio codec designed for real-time speech communication on low-power platforms such as the ESP32 microcontroller and Raspberry Pi. The proposed system targets emergency communication and other bandwidth-limited scenarios while preserving speech intelligibility, speaker identity, and vocal expressiveness. To enable efficient deployment, we propose a minimal neural audio codec architecture together with a framework for converting a causally trained codec into a truly streamable codec through pseudo-lookahead decoding and decoder-input caching. We further replace conventional residual vector quantization (RVQ) with Residual Finite Scalar Quantization (RFSQ) to reduce inference complexity on edge processors and employ a progressive three-stage training strategy for stable optimization under latent quantization. An MFCC-based perceptual loss encourages preservation of speaker characteristics, including harmonic structure and vocal timbre. Experimental results demonstrate real-time operation on a Raspberry Pi 3 while achieving intelligible speech reconstruction at bitrates as low as 2.3 kbps. The proposed approach demonstrates that practical neural speech communication is feasible on highly resource-constrained edge devices.

We propose a mathematical theory of pragmatic information that connects communication, control, and decision-making. Its central notion is the isoteleia mapping, which formalizes equifinality: distinct semantic paths that lead to the same optimal action are treated as pragmatically equivalent. This mapping yields a three-tier hierarchy of syntactic, semantic, and pragmatic information, in which each successive abstraction removes distinctions that are irrelevant to the task. We then define pragmatic entropy, up/down pragmatic mutual information, channel capacity, and rate-distortion, and prove lossless source coding, channel coding, and rate-distortion theorems that extend Shannon's results. These measures quantify decision uncertainty, reliable transmission, and task-oriented compression at the level of terminal actions. We further introduce pragmatic value of information (VoI) and pragmatic cost of information (CoI) as decision-theoretic duals to rate-distortion and capacity, and develop a Lagrangian dual framework for cross-layer optimization. The resulting pragmatic efficiency bound $\mathcal{E}_p(λ)=\sup_R[Φ_p(R)-λ\mathrm{CoI}_p(R)]$ characterizes the maximum net utility attainable by a resource-constrained intelligent system under a given resource price, yielding a behavioral capacity that extends Shannon's symbol-level capacity to goal-directed action. Extensions to continuous messages provide closed-form expressions for Gaussian channels and sources, while dynamic settings are addressed through a Bellman equation for sequential decision-making. The framework supports task-oriented communication, networked control, autonomous systems, and embodied AI by shifting emphasis from symbol fidelity to the effectiveness of information in guiding actions. In this way, it offers a common language for systems that extract value from information under resource constraints.

Deploying Large Language Models (LLMs) directly on mobile platforms at the edge is gaining traction due to a myriad of benefits, such as increased privacy, personalization, and reduced latency. However, LLMs have heavy computational requirements, which are difficult for resource-constrained mobile and edge platforms to fulfill. In addition to limited compute resources, mobile and edge systems often have a compact form factor and lack physical mechanisms to dissipate heat generated from high processor usage rates (e.g., fans) to prevent throttling and reduced processing power, which LLMs can easily cause. To mitigate these effects, prior works have proposed various power governing strategies, such as dynamic voltage and frequency scaling (DVFS), for reducing power and heat generation for heavy computational tasks on mobile platforms. Recently, DVFS methods tailored for mobile LLMs have also been proposed. However, these methods mostly focus on optimizing hardware parameters and processor frequencies, and they fall short under some thermally constrained scenarios. Drawing from recent advances in machine learning, we identify and take advantage of the key insight that not all tokens require full-depth inference to maintain high-quality generation. Motivated by this, we present PELM, a solution that augments traditional DVFS processor frequency tuning with two additional workload-specific knobs: 1) speculative decoding and 2) variable verification depth to expand the optimization space to multiple dimensions for more power efficient on-device LLM inference. In extensive evaluations across hardware platforms and datasets, PELM demonstrates superior performance compared to state-of-the-art power governing methods, with up to 23.1% speedup and 52.4% reduction in energy consumption, while maintaining comparable task performance. The source code is available at https://github.com/imec-nu/PELM.

This work addresses a hardware constraint in reservoir computing: the limited size of the readout layer imposed by systems with a physical readout. We investigate a strategy to accommodate this constraint based on random projection, which compresses high-dimensional reservoir states into a lower-dimensional subspace while preserving key properties of the source space and information- processing capabilities. To evaluate this approach, we compare a small, standalone time delay reservoir against a larger configuration whose output is projected down to match the same restricted readout dimension. Using task-independent metrics, we demonstrate that the distribution of information-processing capacities may differ between the two configurations, even at identical readout sizes. Furthermore, we perform a comprehensive hyperparameter scan to assess how both systems behave under varying physical regimes. Finally, we benchmark this approach on the standard NARMA10 task, showing that the random projection framework can yield superior performance compared to a standalone constrained reservoir, within specific compression range. These results provide a scalable pathway to bypass physical readout bottlenecks in hardware-based reservoir computing.

Stream learning is commonly evaluated through predictive performance and adaptation to concept drift. However, sustained operation of a stream learner also requires predictable and bounded resource usage even on long streams. This requirement becomes even more critical when learning moves from servers to near-sensor embedded systems where memory and processing are scarce resources. In state-of-the-art stream learning, however, we perceive a strong focus on concept drift adaptation, whereas resource usage is often an evaluation byproduct. To close this gap, we benchmark seven representative stream classifiers on 13 real and synthetic streams under model-size budgets from 128,KiB to approximately 8,MiB. Our benchmark comprises a total of 6,463 experiments. We measure failure-aware accuracy, peak model size, time to budget exhaustion, and prediction-plus-update latency. The results reveal two distinct resource failure modes. Adaptive ensembles can exceed small budgets almost immediately because of their initial footprint, even when their size remains stable thereafter. Incremental trees can fit initially but grow throughout a long stream, with HoeffdingTrees (HT) and Extremely Fast Decision Trees (EFDT) increasing by median factors of 7.37 and 5.87. Explicitly compact methods remain the only viable option under the smallest budgets, but are usually overtaken as larger budgets make adaptive ensembles competitive. Hence, many state-of-the-art methods are only partially applicable in embedded systems or for long-running systems. We therefore call on the stream-learning community to make bounded resource usage a first-class design objective alongside drift adaptation, and propose concrete steps toward this goal, including an API through which stream learners can explicitly expose and respect resource budgets.

TinyML includes the implementation of machine learning on devices with limited memory and computing resources. With the development of technology, AI systems continue to scale in terms of size and computational requirements. This forces researchers to adapt methods to be environmentally sustainable by designing techniques for reducing computational costs and energy consumption in inferring AI models, even in small devices. In this work, we present preliminary findings on a novel application of the tree depth prune instance hardness method to the TinyML system. The results indicate that threshold control can change energy consumption with limited classification quality changes. This method allows us to adjust classification accuracy, thereby influencing computational complexity and energy consumption for inference. We present a work in progress with initial results as a proof of concept.

Model compression is critical for deploying networks on resource-constrained edge devices. While pruning-based methods can significantly reduce model size, they often suffer from abrupt performance collapse beyond a sparsity thresh-old, making it difficult to identify the feasible compression limit of the model. To address this challenge, we propose a boundary-Learning reverse regrowth framework, BRIDGE, that reformulates compression as a constructive boundary-search problem. Unlike forward pruning, our method first drives the model to an extremely sparse state to expose the collapse region, and then selectively regenerates the critical structure to restore performance. The proposed framework employs a hierarchical regeneration strategy, including coarse-grained layer selection and fine-grained regeneration parameter selection, to accurately identify which parameters require recovery. Experiments show that our method can recover models from the brink of collapse on both CNNs and Transformer architectures, demonstrating its architecture in-dependence. BRIDGE achieves a performance improvement of up to 1.49% in unstructured pruning and up to 4.77% in structured pruning. These results demonstrate that reverse regeneration can effectively extend the compression limit while maintaining stable performance. The source code is available at https://github.com/EnumaCaliber/BRIDGE.

Vision Transformers (ViTs) demonstrate exceptional performance in computer vision but suffer from large parameter counts and quadratic computational complexity, severely limiting their deployment on resource-constrained edge hardware. While recursive weight-sharing reduces parameter counts and token merging mitigates computational and memory bottlenecks, integrating these two paradigms without costly retraining is non-trivial, leaving this intersection largely unexplored. We propose MergeOver, a post-training approach that integrates Token Merging (ToMe) into the recursively weight-shared Sliced Recursive Transformer (SReT). Through an Unmerge tracking stack, constraint-safe merge-rate adjustment, and synchronised token-mass tracking across spatial permutations, MergeOver resolves the spatial and merging constraints of this integration. We further employ a stage-wise single-shot schedule that performs token reduction at the first block of each stage and maintains a fixed sequence length throughout its subsequent recursive iterations. Benchmarked on ImageNet-1K, our selected configuration reduces top-1 accuracy by 1.47 percentage points. On the GPU, it reduces peak activation memory by 37.3% and 38.4% at batch sizes 1 and 16, while throughput decreases by 21.7% at batch size 1 but increases by 21.7% at batch size 16. On a Raspberry Pi 5 (ARM CPU), it reduces latency by 2.4% and 17.6% at batch sizes 1 and 16. These results show that MergeOver can recover a meaningful part of the throughput and memory cost that recursive weight-sharing introduces, without retraining, and provides a baseline for combining token merging with hierarchical recursive transformers.

Medical AI has demonstrated specialist-level diagnostic accuracy, yet these capabilities remain largely inaccessible in resource-constrained rural settings where bandwidth is scarce, compute is limited, and clinical decision-making requires integrating heterogeneous modalities. We introduce a cloud--edge collaborative architecture that addresses these constraints: lightweight, domain-specific models on the edge transform raw medical data into compact structured outputs, while a cloud LLM synthesizes these outputs into clinical summaries. An LLM-based orchestrator dynamically selects diagnostic tools based on patient context, promoting comprehensive modality coverage without processing irrelevant inputs. We evaluate on 20 multimodal clinical cases spanning cardiac, obstetric, trauma, and screening scenarios under three simulated network profiles (500,kbps--5,Mbps). The hybrid system achieves 98--99% diagnostic tool recall with 92--96% precision, matches or exceeds cloud-only baselines on clinical accuracy, and maintains bandwidth-invariant latency (25--35,s) at 4--15x lower token cost. These results highlight the role of architectural design in enabling efficient multimodal integration and improving factual grounding compared to cloud-only approaches under deployment constraints.

Federated learning enables collaborative model training across distributed edge devices while strictly preserving data privacy. To facilitate practical deployment on resource-constrained edge devices, Spiking Neural Networks (SNNs) have emerged as a promising alternative to traditional Artificial Neural Networks (ANNs) due to their sparse computing mechanisms and high energy efficiency. However, jointly training ANNs and SNNs exposes a challenge of representational misalignment, which is intrinsically caused by differences in information representation, specifically the semantic gap between continuous real-valued activations in ANNs and discrete spatio-temporal spikes in SNNs. To overcome this barrier, we propose AS-FedBridge, a novel federated learning framework tailored for mixed ANN-SNN clients. AS-FedBridge features a lightweight Bridge equipped with a Pseudo-Spike Interface, which effectively projects continuous signals into a spike-compatible space to facilitate ANN-SNN alignment. Given the absence of existing mixed ANN-SNN federated frameworks, we establish a comprehensive benchmark to evaluate against multiple advanced heterogeneous FL methods. Our empirical analysis demonstrates a positive correlation between the degree of ANN-SNN alignment and the collaborative FL performance. Across four datasets, AS-FedBridge consistently demonstrates advanced accuracy while mitigating extreme scale, architecture, and client heterogeneity challenge. Furthermore, our framework enables a highly controllable trade-off between model performance and resource efficiency. AS-FedBridge accomplishes these robust performance gains while introducing only marginal computational overhead, establishing a robust and practical foundation for mixed ANN-SNN federated learning systems.

This paper explores the challenges and the methodologies associated with learning quality representations in scenarios with unlabelled small or limited datasets for downstream information extraction task (Multidomain Named Entity Recognition (NER). The study adopts a Transfer Learning on small datasets. Traditional NER systems often rely on large, labelled data, which is impractical for many domains. This study, therefore, applies an unsupervised pre-training approach to precondition and identify entities without annotated datasets, then applies transfer learning models to different simulated limited datasets for a named entity recognition task. Entity Recognition (NER) is essential in natural language processing (NLP), it identifies and classifies related entities within the text. This study addresses the complexities of domain variability, data sparsity, and overfitting and investigates innovative approaches such as data augmentation, few-shot learning, and domain adversarial training. Integrating these techniques promises to enhance the performance and generalizability of NER systems across diverse and resource-constrained domains, paving the way for more efficient and adaptable NLP applications.

Deploying state-of-the-art deep neural networks (DNNs) at the wireless edge is severely bottlenecked by the strict energy and resource constraints of mobile devices. While federated split learning (FSL) mitigates on-device computation by offloading workloads to an edge server, this may introduce systemic overheads, while the continuous exchange of cut-layer data, and submodels still incurs significant energy consumption (EC). To address this, we propose a green quantized FSL (GQ-FSL) framework that incorporates stochastic quantization for both local collaborative training and wireless transmissions. Notably, GQ-FSL supports asymmetric precision levels for the client- and server-side submodels, effectively decoupling device energy constraints from global convergence degradation. To quantify these tradeoffs, we develop parameterized energy models for the split architecture and derive a theoretical convergence bound under statistically heterogeneous data. Building on that, we formulate a joint optimization problem to configure the DNN split point and precision levels, minimizing the total system EC while satisfying a strict target accuracy constraint. Ultimately, we demonstrate that GQ-FSL enables large-scale DNN deployment on resource-constrained devices, achieving superior energy efficiency compared to quantized federated learning and full-precision FSL.

We present ELMOD - Efficient Language Model for On-Device Deployment - a compact (2.7B) German language model designed for efficient inference on resource-constrained hardware. ELMOD was trained on a limited computational budget (55k H100 GPU hours) using exclusively publicly available data. We developed a suite of German-specific data pre-processing, which differ from English-oriented counterparts in their handling of morphological variation, compounding, and orthographic conventions. Furthermore, we introduced a quality filtering and rephrasing step, which increased the instructional quality of the data, improved performance during the annealing phase, and reduced overall compute requirements. Thanks to our architectural model and data choices, including prefiltering, our educational-quality filtering and rephrasal to raise the educational-quality, ELMOD is the strongest performer in its size class (<3B), matching the performance of 7B-parameter models in German.

Lightweight large language models (LLMs) are increasingly being deployed locally on personal computers and are expected to play a growing role in resource-constrained edge and mobile environments. In such settings, energy consumption, execution time, and memory usage directly affect practical usability, yet existing evaluations of LLM efficiency largely rely on proxy descriptors such as parameter count or FLOPs, often decoupled from task precision. This paper introduces a PTME-based experimental framework for the precision-aware profiling of lightweight LLM inference, jointly measuring Precision, execution Time, peak Memory usage, and Energy consumption through direct hardware-level measurements. The methodology is applied to a representative set of lightweight LLMs executed locally under edge-class resource envelopes on a controlled desktop platform, using benchmarks spanning code generation, mathematical reasoning, and multi-task understanding. We find that static proxy descriptors approximate inference cost well but fail to predict precision. Tightening the resource envelope increases cost without affecting precision, amplifying execution time more strongly than energy and penalizing larger models the most. Moreover, no single model dominates across all PTME dimensions, and a Pareto analysis reveals non-dominated configurations that would be hidden by accuracy-only or efficiency-only assessments, providing practical guidance for selecting models under different resource envelopes. These results show that selecting lightweight LLMs by size, FLOPs, latency, or accuracy alone can select the wrong deployment candidate; PTME profiling exposes configurations that preserve useful accuracy at lower physical cost.

An increase in advanced Android malware requires the use of deep learning models, which can run on Android devices. But there is a trade-off between security and energy use, as strong detection models can drain the battery of devices fast. This work tests different Multi-Layer Perceptron (MLP) model configurations to balance malware detection performance and energy efficiency. In this work, we compared standard FP32 models with optimized INT8 quantized neural networks with different model depths using TUANDROMD and DREBIN datasets for both classification performance and energy consumption. The results show that INT8 quantization reduces model size by about 3.5 times with a decrease in energy consumption to 0.0189 mJ per inference, while maintaining more than 99.2% detection accuracy. We found that shallow quantized architectures, such as 3-layer and 4-layer QNNs, reduce energy costs by improving throughput and shortening the time of CPU operating in a high-power state. This work shows that efficient malware protection can be achieved on resource-constrained smartphones and provides a foundation for Green AI in mobile security.

Bayesian inference provides a principled foundation for reasoning under uncertainty, but its computational cost hinders deployment on resource-constrained edge devices. In this paper, we present a hardware-oriented methodology for accelerating discrete Bayesian inference on commercial off-the-shelf embedded GPUs. We identify that the latency of a broad class of variational message-passing algorithms is dominated by tensor contractions. Our approach restructures the memory layout of these operations using two complementary merging strategies that produce compact, regularly-shaped primitives better suited for efficient GPU execution. We then introduce optional sparse array representations and a tensor-clustering scheme to reduce the memory footprint. We instantiate the methodology and produce optimized variants of three message-passing algorithms for Hidden Markov Models (HMMs), namely variational filtering, variational message passing, and marginal message passing. Furthermore, we complement this with a machine-learning-based autotuner that automatically selects the best-performing algorithmic variant for a given generative model specification. Benchmarked on an NVIDIA Jetson Orin AGX across 770 randomly sampled realistic Partially Observable Markov Decision Process (POMDP) configurations, our implementations achieve speedups of up to 5x, with typical gains of 2-2.5x, while producing numerically identical outputs to the baseline implementations.

The rapid deployment of machine learning systems across cloud, edge, and enterprise environments has brought model optimization to the forefront of systems-engineering. Despite a rich literature spanning quantization, pruning, knowledge distillation, parameter-efficient fine-tuning (PEFT), and inference-time optimization, practitioners are often left navigating these techniques through heuristics rather than principled methodology. We argue that optimization should be formulated as a constraint-driven, multi-objective engineering decision and introduce a unified framework that characterizes any production deployment along five interacting constraint dimensions: data availability, latency budget, memory budget, accuracy tolerance, and retraining budget. Building on this taxonomy, we synthesize empirical gains reported across the research literature and map them to operational constraints rather than algorithmic categories. To ensure practical relevance, we selected these techniques by reviewing recent literature for methods that report measurable improvements against critical deployment bottlenecks. We propose a prescriptive decision framework and provide optimization pipelines for four representative industrial scenarios to illustrate it in practice. To the best of our knowledge, this work provides one of the first structured attempts to formalize model optimization as a constraint-aware, multi-objective engineering process, synthesizing quantitative evidence from the research literature.

Deploying large-scale transformer models on resource-constrained edge devices remains a challenge due to the high energy and memory overhead inherent in static inference, which processes simple and complex tokens with uniform intensity. To address this, we propose Adaptive Model Compression (AMC), a saliency-driven framework that dynamically allocates hardware resources based on token importance. By implementing a multi-tier architecture, our system identifies critical high-saliency information for full-precision processing while aggressively reducing the rank and bit-width of less significant data. Experimental results demonstrate that AMC achieves a 59.2% reduction in system energy and a 2.24x increase in throughput on 45nm CMOS hardware. This approach effectively extends the battery life of mobile devices by utilizing high-definition compute only where necessary, maintaining robust performance with a marginal 3.6% accuracy trade-off.

Recent advances in video diffusion have been driven by scaling transformer-based architectures to billions of parameters, substantially improving visual fidelity and motion coherence. In contrast, existing mobile video diffusion models remain limited to relatively small parameter budgets, typically 0.4-1.8B, restricting generation quality. In this work, we show that high-quality mobile video generation does not require small models. Instead, we demonstrate that a server-scale 5B-parameter video diffusion transformer can be deployed efficiently on memory-constrained mobile hardware through recurrent reformulation and structured compression. Starting from Wan2.2-5B, we rely on a recurrence distillation framework that converts video generation into a chunk-wise autoregressive process with constant-memory attention computation. Combined with causal linear attention, the model operates as an RNN at inference time while preserving temporal coherence across chunks. We further propose a learnable attention head pruning method based on binary per-head gates optimized end-to-end using a noise-biased sparsity objective and distillation-based finetuning. Together with sampling-step distillation and memory-optimized VAE decoding, MobileWan becomes the first 5B-scale video diffusion model deployable on a commercial mobile device. Our system generates 5-second 480x832 videos at 16 FPS in 20 seconds end-to-end latency, achieving a VBench score of 83.79 and establishing a new state of the art in mobile video generation. Project page: https://qualcomm-ai-research.github.io/mobilewan

Dynamic Voltage Frequency Scaling (DVFS) on resource-constrained embedded GPU platforms is essential for energy-efficient small language model (SLM) fine-tuning, as privacy- and personalization-driven adaptation increasingly requires local execution and involves repeated forward-backward optimization over many mini-batches, making it substantially more time- and energy-intensive than single-pass inference. To this end, 1) we first characterize the fine-tuning behavior of representative encoder-only SLMs of BERT variants, and autoregressive decoder-only SLMs of Pythia variants on GLUE benchmarks. In addition to the characterizations, 2) we propose a simple yet effective ML-based model selection that selects energy-optimal GPU DVFS settings on resource-constrained embedded platforms. Our results on NVIDIA Jetson AGX Orin demonstrate average 13.11% energy savings (up to 26.73%) over MAXN Mode 0, which has no explicit power cap.

Line segment detection is a key building block in visual SLAM, 3D reconstruction, and industrial inspection. Recent deep learning methods have greatly improved accuracy, yet even the smallest models require several megabytes of memory, exceeding low-cost MCU capacity. This work investigates the maximum achievable accuracy under a sub-megabyte budget. We propose MiLSD, a detector tailored for MCU-level constraints, and systematically compare three output representations within a compact fully-convolutional backbone. Our study shows that the proposed F-Clip center-with-length-and-angle formulation learns most effectively at small model sizes. We find that 8-bit quantization preserves full-precision performance, while 4-bit quantization causes significant degradation, particularly in angle regression, with quantization-aware training recovering only part of the loss. With a one-megabyte activation budget and inference enhancements including sub-pixel decoding, test-time augmentation, and a lightweight verifier, MiLSD improves sAP10 on ShanghaiTech Wireframe from 10.6 (25k parameters, 0.25 MB) to 24.1 within 1 MB. Rather than competing with GPU-scale parsers, we map the accuracy memory trade-off across representations, bit-widths, capacities, and post-processing strategies for embedded vision systems.

Accurate 3D medical segmentation is limited by anatomical variability and high computational costs. While knowledge distillation (KD) offers a route for model compression, conventional methods often fail to preserve complex structures and are overwhelmed by background noise. We propose Displacement-Preserving Relational Distillation (DPRD), which distills latent anatomical trajectories via vector based alignment to preserve the orientation and relative scale of the teacher's manifold, and prevents signal dilution by anchoring distillation in task-relevant structures. Integrated into nnU-Net, DPRD outperforms established baselines on ISLES 2022 and AMOS 2022 benchmarks. Notably, on the AMOS dataset, DPRD achieves a Dice score of 85.46%, edging out the high-capacity MedNeXt teacher while significantly reducing boundary errors. Despite utilizing only ~5% of the teacher's parameters and ~3% of its FLOPs, our approach maintains high structural consistency. This provides a robust, efficient solution for deploying high performance segmenters in resource-constrained clinical environments. Code: https://github.com/ClinicaAlpha/DPRD-3D-MedSeg

Neuromorphic controllers for size, weight, and power-constrained systems require neural architectures that are both energy-efficient and interpretable at the level of system dynamics. However, existing approaches either rely on end-to-end trained spiking networks with limited interpretability, or on converted classical controllers that fail to fully exploit neuromorphic dynamics. We present a spiking neural network (SNN) architecture for generating polar trajectories, using a winner-take-all (WTA) architecture with accessory populations that induce controlled transitions in neural activity. We demonstrate tuning rules for these population dynamics, and utilize a form of shunting inhibition to enable independent control of direction, speed, and radius of the resulting polar trajectories. We implement the network on the SpiNNaker2 neuromorphic processor, and demonstrate a two to three orders of magnitude reduction in wall-clock step time and three to four orders of magnitude reduction in energy expenditure when compared to conventional computing platforms.

This paper studies energy efficient tracking of power-limited mobile users with the assistance of a Reconfigurable Intelligent Surface (RIS). Since localization pilot transmissions dominate the energy budget of power-constrained devices, we introduce a low-overhead feedback link from the Base Station (BS) to the user to enable dynamic uplink power control. To navigate the discrete and decentralized nature of this active sensing problem, we propose a novel Dual-Agent (DA) deep learning framework that jointly optimizes the discrete RIS phase profiles and the UE's transmit power in real time. Specifically, our approach employs a hybrid training methodology integrating the neuroevolution paradigm with supervised learning, effectively overcoming the non-differentiability of discrete phase responses from the RIS unit elements and the strict information bottleneck of single-bit feedback messages for pilot power control. The proposed DA active sensing framework can be applied with both single- and multi-antenna BSs, the latter with only minor modifications in the structure of one NN: an additional output branch with appropriate structure is included for the latter case to select a valid digital combiner from a finite set. Extensive numerical simulations demonstrate that the proposed scheme achieves highly accurate and robust tracking across diverse target motion models, outperforming extended Kalman and particle filters, as well as, machine learning-based trackers. Furthermore, in static localization, it is shown to significantly outperform traditional fingerprinting schemes, deep reinforcement learning baselines, and standard backpropagation-based estimators.

By maintaining global consistency across robot teams, multi-robot LiDAR map merging enables faster exploration and efficient area coverage. However, map merging requires exchanging massive sensor data between the server and robots, making communication the bottleneck, especially in communication-constrained environments. Therefore, we present Commerge, a communication-efficient map merging framework that achieves bandwidth reduction through graph-theoretic selective data exchange. By doing so, our Commerge reduces inter-robot communication by up to 5,000x while maintaining alignment accuracy. Our key insight is that only a small subset of carefully selected scans is sufficient for robust map merging. We formulate this as a three-stage cascaded optimization problem on an exchange graph, where vertices represent robot keyframes and edges denote candidate inter-robot loops. Through three cascade stages, we select a sequentially overlapped, balanced-transmission-cost, and geometrically-perceptually optimal scan subset that preserves alignment quality while reducing communication. Unlike existing approaches that either transmit whole scans, which require GB-scale data exchange, or employ naive downsampling, our approach exchanges only MB-scale data while achieving comparable alignment accuracy. Extensive evaluation on five public datasets and four in-house datasets covering cave, planetary-analog, indoor, and outdoor campus environments shows up to 99.98% reduction in data exchange (e.g., from 7,000MB to 1.3MB on the HeLiPR dataset), while maintaining alignment performance across embedded to desktop platforms. The supplementary materials are available at https://sparolab.github.io/research/commerge.

The rapid proliferation of Internet of Medical Things (IoMT) devices introduces critical cybersecurity vulnerabilities in healthcare environments where resource-constrained medical devices operate under strict latency requirements and stringent data-privacy regulations. To address these challenges, this paper presents the Lightweight Digital Twin and Federated Reinforcement Learning (LDT-FRL) framework, a privacy-preserving defense architecture integrating four complementary mechanisms: a Temporal Attention Encoder (TAE) built on a GRU backbone with learned temporal self-attention for flow-level threat classification; lightweight LSTM-based Digital Twins trained on normal-class traffic to generate per-device anomaly scores that gate the TAE classifier through a learned sigmoid coupling; a Federated Proximal Policy Optimization (PPO) agent selecting among ALLOW, ISOLATE, and HONEYPOT_REDIRECT actions based on a seven-dimensional state; and an intelligent honeypot layer that converts redirected suspicious traffic into actionable threat intelligence. A federated aggregation strategy employing EMA-smoothed per-client validation losses as inverse-weighted FedAvg coefficients stabilizes global model updates under non-IID client distributions. Evaluated on CICDDoS 2019 and TON-IoT benchmarks, LDT-FRL achieves 99.66% and 99.95% test accuracy respectively, with macro-F1 scores of 0.9913 and 0.9995, converging 81% faster than the DTFL-CD baseline while attaining perfect F1=1.000 on the severely imbalanced MITM class. Explainability analysis via SHAP, LIME, Grad-CAM, and counterfactual methods confirms that the TAE focuses on semantically meaningful flow features, providing interpretable evidence for each defense decision.

Structured State Space Models (SSMs), including the S4 and S4D architectures, have recently emerged as powerful alternatives to attention-based models for capturing long-range dependencies in sequential data. Despite their strong empirical performance, deploying these models in time- and resource-constrained settings remains challenging due to their computational and memory demands. In this paper, we propose a novel incremental, operator-level pruning approach for S4- and S4D-based models that significantly reduces inference cost while preserving predictive performance. To the best of our knowledge, this is the first work to systematically investigate structured operator pruning for SSMs. Our method progressively prunes model operators by interleaving structured masking with fine-tuning, while jointly monitoring accuracy and inference latency. We implement this approach within a unified training and evaluation framework that enables systematic exploration of efficiency-accuracy trade-offs. Experiments across multiple benchmark datasets show that pruning up to 70% of the model operators preserves the performance of the original models in most cases, while substantially reducing inference latency. These results demonstrate that structured operator pruning is an effective and previously unexplored strategy for improving the efficiency of SSMs and facilitate their deployment in practical, resource-constrained scenarios.

Transformer-based models achieve strong performance for jet tagging at the CERN LHC, but deploying them in low-latency, resource-constrained trigger systems is challenging. We present an initial implementation of a quantized, integer-only transformer for jet tagging on the AMD Versal AI Engine (AIE), mapping dense and multi-head attention (MHA) layers to AIE tiles. The main contribution is a reusable software framework that represents transformer layers as composable AIE building blocks and automatically generates the corresponding Vitis graph code from a high-level Python model description. This framework provides a foundation for future research and is released as open-source software at https://github.com/KastnerRG/particle_transformer_aie.

Large Language Models (LLMs) are increasingly deployed in edge-cloud inference systems to handle diverse user tasks with heterogeneous accuracy, latency, and cost profiles. Selecting the appropriate LLM for each incoming task is critical for ensuring service quality and efficient resource utilization. However, model heterogeneity, stochastic and unknown performance characteristics, and time-varying task demands make static selection strategies inadequate. Real-world deployments often impose hard resource budgets such as monetary expenditure limits, along with soft service-level requirements such as latency guarantees. These constraints introduce additional challenges for online decision-making. We formulate this problem as a constrained stochastic bandit learning task, where the learner sequentially selects models under both packing-type (hard) and covering-type (soft) constraints, while adapting to time-varying task demand. The learner operates without access to the underlying reward, cost, or latency distributions and must rely on partial feedback. We develop a novel online learning algorithm that leverages confidence-bound estimates and demand predictions to balance reward maximization with long-term constraint satisfaction. We provide theoretical guarantees showing sublinear regret and sublinear covering constraint violations compared to an offline benchmark with full information. Experimental results on synthetic workloads demonstrate the effectiveness and robustness of our approach in dynamic, resource-constrained environments.

Continuous cardiac monitoring in wearable devices demands classifiers that are simultaneously accurate, energy-efficient, and deployable on resource-constrained hardware. While deep neural network approaches have demonstrated high classification accuracy for electrocardiogram (ECG) arrhythmia detection, their substantial parameter counts and reliance on multiply-accumulate-intensive operations make them impractical for low-cost edge platforms. In this work, we propose ECG-LDC, a hardware-software co-design framework that adapts Low-Dimensional Computing (LDC) for real-time ECG arrhythmia classification. ECG-LDC employs a dual-encoder architecture with dedicated value and feature codebooks to independently encode morphological waveform features and RR-interval temporal features, enabling effective capture of both intra-beat and inter-beat cardiac dynamics. The framework encompasses data preprocessing, model training, and a hardware accelerator architecture prototyped on the Pynq-Z2 platform. Implemented using binary representations and XOR/XNOR-based operations, ECG-LDC achieves $97.18\%$ accuracy with a memory footprint of only $3.86\ \text{kB}$. ECG-LDC sacrifices approximately $1.8\%$ accuracy versus SOTA TinyML classifiers but achieves $11$~$570\times$ reduction in memory usage; among FPGA-based five-class arrhythmia classifiers, it delivers the highest accuracy with up to $2.4\times$ fewer LUTs and zero DSP block utilization, affirming its suitability for real-time arrhythmia detection on resource-constrained wearable platforms.

Wearable healthcare devices are the fastest-growing Internet of Things (IoT) sector. Many automated healthcare services rely on two crucial biological signals, namely ECG and EEG, which reflect the activity of the heart and brain, respectively. Although deep neural networks are considered the primary way to process and analyze these signals, the very tight energy and computational power constraints in wearable devices are far below the computational, energy, and memory bandwidth demands of DNN models, thereby impeding the deployment of deep learning in many practical wearable services. This paper investigates the feasibility of deploying state-of-the-art DNN models in resource-constrained wearable devices. Notably, we explore the trade-off between accuracy and computational complexity of DNNs when parameter quantization and electrode reduction methods are used. Our investigation centers on several state-of-the-art DNN models designed for EEG signal analysis, specifically for detecting epileptic seizures. Our findings demonstrate that, when applied judiciously, these techniques can significantly reduce the complexity of the DNNs under consideration with minimal adverse effects on accuracy. These results reveal the explicit trade-offs between accuracy and complexity reduction encountered when adapting DNN-based online EEG analysis for wearable devices.

Federated Learning (FL) has emerged as an effective paradigm for collaborative intelligence while preserving data privacy. However, data heterogeneity arising from non-IID distributions and decentralized security threats remain significant challenges, particularly in resource-constrained enterprise environments. This paper presents TITAN-FedAnil+, a Trust-Based Adaptive Network for blockchain-enabled federated learning in intelligent enterprises. The proposed framework introduces affinity propagation-based adaptive clustered aggregation to identify and filter malicious updates without requiring prior knowledge of the number of attackers. In addition, GPU-accelerated vectorization is employed to improve computational efficiency, while a signed state jump mechanism enables lightweight blockchain resynchronization. Experimental results demonstrate substantial reductions in memory overhead, achieving up to 81% savings across 50 communication rounds on constrained 8 GB edge devices compared with the baseline framework. The results indicate that TITAN-FedAnil+ effectively improves robustness, scalability, and resource efficiency for secure federated learning deployments in intelligent enterprise environments.

Unmanned Aerial Vehicles (UAVs) equipped with radar sensors are deployed for target search missions in diverse environments, where targets exhibit characteristic signatures (e.g., respiration micro-motion in human search) detectable through occlusions. A fundamental challenge arises from shifts in radar statistics as the UAV moves through a dynamic and potentially non-stationary environment, rendering any fixed signal-processing strategy suboptimal; yet perception and adaptation must run onboard a resource-constrained aerial node in real time. Since no single detector performs well across all conditions, we adopt a multi-policy paradigm and formulate UAV target search as an online policy selection problem over a library of specialized detectors, with performance measured by regret, the cumulative loss gap relative to the best policy in each scene. The setting couples in-scene stochastic noise with inter-scene shifts. Whereas prior methods capture only one regime, we account for both through the Stochastically Extended Adversary (SEA) framework, without requiring oracle knowledge of scene dynamics. Because adaptation must run at the UAV, we instantiate SEA through \textsc{SEArch}, a lightweight optimistic Follow the Regularized Leader (OFTRL) selector with an adaptive learning rate, achieving regret $O(\barσ_T \sqrt{T} + \sqrt{J})$, where $\barσ_T$ captures radar measurement noise and $J$ is the number of scene transitions over the mission horizon $T$. To enable rapid adaptation under frequent scene changes, we further introduce \textsc{W-SEArch}, a windowed variant that restarts every $w$ rounds and achieves regret $O(\barσ_I \sqrt{w})$ under at most one transition per window. Experiments show up to 30% regret reduction compared to non-adaptive baselines across a range of non-stationary settings.

Deploying lightweight Large Language Model (LLM) agents on edge servers can reduce latency and move agentic services closer to users, but resource-constrained edge models often struggle with long-horizon tasks that require persistent memory, subgoal tracking, and reflection. Fine-tuning edge models after deployment is costly and difficult to scale across heterogeneous nodes, while purely local memory leaves agents with isolated experience and growing prompt context. We propose \textsc{CoMIC}, a parameter-update-free cloud-edge framework for Collaborative Memory and Insights Circulation. \textsc{CoMIC} follows a \textit{Centralized Reflection, Decentralized Execution} design: edge agents execute locally using subgoal-oriented hierarchical memory and selective re-expansion of relevant histories, while a cloud-side LLM critic asynchronously evaluates completed trajectories, filters reusable experience, and aggregates cross-agent guidance keyed by semantic subgoal identifiers. Across five long-horizon agent tasks spanning symbolic planning and text interaction, \textsc{CoMIC} improves progress rate and action grounding for weak edge agents and yields task-dependent success-rate gains without updating model parameters.

Integrated sensing, communication, and computation (ISCC) provides a promising framework for indoor human-centric applications. In these applications, short-term human pose prediction facilitates continuous human tracking and resource allocation in advance. In this paper, we propose a Cramer-Rao bound (CRB) guided resource allocation framework for indoor mmWave ISCC systems to minimize the human pose prediction error under communication, latency, and energy constraints. We characterize the impact of sensing power on range-estimation uncertainty and point-cloud perturbation based on the CRB. To capture the impact of computation resources on prediction performance, we adopt an adaptive-depth Mamba-based pose prediction model, where lightweight prediction heads are attached after every layer to enable inference with different model depths. With this unified sensing-computation modeling, we establish a quantitative relationship among sensing power, model depth, and prediction error. Furthermore, we formulate a joint resource allocation problem to minimize the pose prediction error. To solve this problem efficiently, we develop an alternating optimization (AO)-based algorithm, where closed-form solutions are derived for the sensing power and model depth update steps. Simulation results show that the proposed scheme significantly reduces pose prediction error compared with baseline methods, validating its effectiveness for resource-constrained indoor human-centric ISCC systems.

Federated edge learning (FEEL) has recently emerged as a promising paradigm for achieving edge intelligence (EI) via enabling collaborative model training across edge devices while protecting data privacy. In this paper, we put forth an online optimization framework that jointly manages federated training and inference on resource-constrained edge devices. We introduce a tandem-queue-inspired conversion mechanism that bridges inference requests and training data, and further incorporate both data and model freshness into the accuracy formulation to capture temporal dynamics in real-world environments. To maximize inference accuracy while minimizing latency and energy consumption, the mode selections, communication, and computation resource allocations of edge devices are jointly optimized. We formulate this optimization as a multi-objective optimization problem, which is NP-hard and further complicated by the online setting. To address these challenges, we transform the problem into a multi-objective Markov decision process (MOMDP) and develop a \underline{c}onstrained \underline{m}ulti-\underline{o}bjective \underline{p}roximal \underline{p}olicy \underline{o}ptimization (C-MOPPO) algorithm. Specifically, C-MOPPO first learns a set of policies with different preferences across three objectives, then leverages constrained policy optimization to enrich the Pareto front and obtain high-quality, dense solutions. Extensive experiments demonstrate that C-MOPPO achieves well-balanced trade-offs among objectives and significantly outperforms baselines under various system configurations.

Low-dose computed tomography (LDCT) reconstruction faces a critical tradeoff between reconstruction quality and resource requirements. While recent deep learning methods achieve state-of-the-art performance, they typically rely on over 500,000 parameters trained on large-scale datasets exceeding 35,000 scans. This work investigates whether graph-based regularization can provide meaningful noise reduction under strict resource constraints. We propose Deep Graph Laplacian Regularization (Deep GLR), integrating quadratic graph regularization into a Proximal Forward-Backward Splitting optimization framework with three lightweight CNN modules. Evaluated on the LoDoPaB-CT benchmark, Deep GLR achieves 30.70 dB PSNR, representing a 6.33 dB improvement over filtered backprojection, while using only 91,848 parameters trained on 1000 samples (2.8% of standard training set). Compared to benchmark methods, this represents 5.8 times better parameter efficiency and 30 times better data efficiency per dB improvement. The learned graph bandwidth parameter ($ε$=1.25) converges to interpretable values, suggesting the method captures meaningful image priors rather than overfitting. While a 13 dB gap remains versus state-of-the-art methods, results demonstrate that graph-based regularization provides a favorable efficiency-quality tradeoff for resource-constrained medical imaging scenarios.

Large language models are increasingly used as orchestrators of external tools via the Model Context Protocol (MCP), but MCP is built for software services with megabytes of memory and does not descend to the microcontrollers that dominate the long tail of physical devices. Recent work (IoT-MCP) ports MCP to edge gateways at 74 KB peak memory; this still excludes the smallest commodity MCUs and, critically, does not address the safety problem of giving an unreliable caller (an LLM that may hallucinate or be prompt-injected) direct control of physical hardware. We present the Device Context Protocol (DCP): a sub-50-byte typical frame (6-byte header + CBOR payload + optional 16-byte HMAC), a manifest schema in which capability scoping, range and type checks, dry-run evaluation, and units-as-types are protocol-layer primitives, and a host-side Bridge that rejects malformed or hallucinated calls before any byte reaches the device. Reference firmware measures 27.6 KB flash / 0.6 KB RAM on ESP32; the Python Bridge, ESP32 firmware, and a language-neutral conformance suite are MIT-licensed and public. An empirical study -- 675 tool calls produced by five LLMs across four vendors (DeepSeek, Alibaba, Zhipu, MiniMax) against six categories of adversarial prompts, with the injection category instantiating AgentDojo's attack templates -- shows DCP rejects 100% of capability-escalation attempts and 78% of prompt-injection attempts, versus 0--1% for Raw MCP and IoT-MCP, matching the expressiveness of a well-formed OpenAPI 3 schema at three orders of magnitude less firmware footprint. We position DCP as the missing layer between MCP (which is moving toward enterprise SaaS connectivity) and the physical devices it does not reach.

Deploying large deep neural networks on memory-constrained mobile devices is a central challenge in edge ML. While compression, pruning, and quantization reduce per-parameter cost, transformer-based models remain too large for the 3.3-7.4 GB RAM envelope of commodity Android handsets. We present the DNN pipeline scheduling subsystem of CROWDio, which achieves practical ONNX inference across resource-constrained Android workers without model modification, by distributing memory pressure across devices via five mechanisms: JIT deferred partition loading, a single-partition-resident constraint, a 4-tier affinity scheduler, a zlib-compressed tensor transport, and a streaming 1:1 dependency model. Evaluated on DistilBERT (Sanh et al., 2019) (approximately 67 M parameters, SST-2) across five Android handsets over ten runs, our system holds peak per-device RSS to 43+-2 MB and limits battery draw to 50+-3 mAh per run, while streaming concurrency cuts batch latency 34% below barrier synchronisation.

Autonomous systems and smart-industry deployments increasingly split computation across near-sensor, edge, and cloud resources, where tight energy, latency, and reliability budgets demand run-time adaptivity. In practice, deciding what to compute and transmit at each point is pivotal; yet as multimodal sensor suites (cameras, LiDAR/depth, etc.) proliferate at the edge, most prior approaches either (i) fuse modalities on powerful servers or (ii) apply uni-modal near-sensor filters that ignore cross-modal dependencies, leading to redundant transmissions or missed events. We present FusionSense, a fusion-aware intelligent sensing framework for energy-constrained autonomous edge systems. Lightweight near-sensor classifiers are trained via a three-step procedure: (i) a server-side fusion model learns the downstream task, (ii) filter-out-safe (FoS) labels quantify each modality's necessity relative to the fused decision, and (iii) an edge-side fusion model is compacted by injecting near-sensor predictions as auxiliary signals. The result is a run-time decision layer that jointly reduces compute and communication while scaling linearly with sensor count. On a dual-modality (RGB+Depth/LiDAR) setup with SynDrone, FusionSense sustains task quality at substantially higher data-reduction rates than uni-modal filters and delivers large end-to-end gains: up to 33x lower energy at 1% FoI prevalence, 11x at 10%, a 92.3% reduction in quality loss at a fixed 30% data reduction, and roughly 1.5x higher energy savings than the best prior filtering baseline.

Digital Twin (DT) technology holds immense potential for surgical planning and personalized medicine. However, generating interactive, patient-specific anatomical twins currently relies on computationally heavy Server-Side Rendering (SSR) or expensive local workstations, creating significant barriers to deployment, especially in resource-constrained settings (RCS). This paper presents a decentralized, client-side WebGPU architecture that democratizes access to high-fidelity anatomical Digital Twins. By bypassing standard server-side rendering pipelines, the framework executes deterministic single-pass raymarching and morphological gradient calculations directly on low-cost integrated edge GPUs. Eliminating the network latency inherent to cloud-rendered solutions, the system achieves a Time to First Pixel (TTFP) of under 920.0ms and maintains stable interactivity at >= 82.0 FPS. Continuous Interaction Fidelity is maintained via uniform buffers, enabling zero-latency manipulation of tissue parameters for dynamic clinical decision-making. By proving that complex 3D medical simulations of patient-specific MRI scan can be executed natively in the browser without deep learning or external computational dependencies, this architecture provides a scalable, affordable foundation for the widespread clinical adoption of healthcare Digital Twins.

Flapping-Wing Micro Aerial Vehicles (FWMAVs) provide exceptional maneuverability and aerodynamic efficiency but pose significant challenges for onboard control due to nonlinear dynamics and stringent Size, Weight, and Power (SWaP) constraints, as exemplified by a butterfly-inspired robot less than 30 gram. To this end, we present a hierarchical neuromorphic control framework that enables fully onboard, closed-loop flight on a widely available, resource-constrained ESP32 microcontroller with a unit cost of approximately $5. Specifically, our method deploys two lightweight Spiking Neural Networks (SNNs) onboard: one for state estimation from raw sensory feedback and another for control via modulation of a Central Pattern Generator (CPG) for wing actuation. Trained by imitation learning, the system achieves stable pitch and heading angle tracking during untethered real-world flight. Experimental results further reveal that the SNN-based controller reduces latency by 36% (1059us to 680us) and power by 18% (0.033W to 0.027W) for inference compared to the conventional Artificial Neural Network (ANN) baseline, demonstrating the viability of spike-based computation without specialized hardware. To the best of our knowledge, this work constitutes the first demonstration of fully onboard neuromorphic control for autonomous flight of a FWMAV, highlighting the potential of SNNs to enable energy-efficient autonomy under stringent SWaP constraints. Visual abstract: http://bit.ly/4nI8ECY Code: https://anonymous.4open.science/r/Espikify-76E3/

Deep learning models have shown strong performance in medical image analysis, but deploying them in low-resource clinical environments remains difficult due to computational, memory, and power constraints. This paper presents a multi-strategy compression framework for brain tumor classification from MRI, encompassing quantization-aware training, knowledge distillation from a DenseNet-101 teacher to a compact DenseNet-32 student with low-bit post-training quantization, and Float16 post-training quantization on a lightweight MobileNetV2 backbone. Using a multi-class brain tumor MRI dataset containing glioma, meningioma, pituitary tumors, and healthy controls, we provide full experimental validation of the MobileNetV2-based pipeline, training the classifier through a three-stage transfer learning process and applying Float16 quantization via TensorFlow Lite. The DenseNet-based distillation and quantization-aware training strategies are described as complementary compression approaches within the framework, with their complete empirical evaluation reserved for future work. Experimental results on the MobileNetV2 pipeline show that the quantized model achieves 82.37 percent validation accuracy compared to the 82.20 percent full-precision baseline, reducing model size from 35.34 MB to 5.76 MB, a 6.14x compression ratio with no meaningful accuracy loss. Per-class evaluation confirms that quantization preserves diagnostic performance uniformly across all four tumor categories. These findings demonstrate that lightweight quantized models can deliver clinically viable brain tumor screening in resource-constrained healthcare settings.

Quasi-bimodal objects, such as text, road signs, and barcodes, play a basic yet vital role in daily visual communication. By boiling these down to clear silhouettes, binarization uses a minimal language to convey essential vision cues for maximum downstream efficiency, especially for tasks that require simple geometric, topological reasoning rather than heavy appearance modeling. The catch is that frame-based imaging often struggles on mobile platforms like drones, self-driving cars, and underwater vehicles, in which rapid motion causes severe motion blur and harsh lighting washes out scene details. To overcome these physical limits, neuromorphic vision via event cameras, featuring microsecond time resolution and high dynamic range, steps in as a natural solution. Building upon this event-driven paradigm, we propose a simple yet effective dual-modal approach that harnesses the synergy between frames and events for training-free, real-time, high-frame-rate binarization on CPU-only devices. Extensive evaluations show that it earns competitive performance against leading techniques in reducing blur artifacts and delivers impressive improvements under challenging illumination at a lower computational cost. Besides, its asynchronous nature bypasses long-standing event-scarcity issues that break traditional time-binning reconstruction at fixed time slots, maintaining clear target shapes even at extreme kilohertz frame rates. Its binary results further serve as reliable representations to facilitate a range of downstream tasks. This work paves the way towards lightweight perception and interaction in embodied intelligence on resource-constrained edge platforms.

Federated learning on edge devices must cope with non-IID client data and tight memory budgets. Adaptive optimizers like Adam stabilize training under data heterogeneity but require storing full-precision momentum and variance states, often tripling client memory overhead. This limits deployable model sizes and concurrent federated jobs on resource-constrained devices. We empirically observe that momentum and variance in federated Adam exhibit fundamentally different statistical properties: momentum values are symmetric and bounded, while variance spans eight orders of magnitude with log-normal structure. Motivated by this asymmetry, we propose \textbf{Q-LocalAdam}, which applies distribution-aware 8-bit quantization block-wise linear encoding for momentum and log-space encoding for variance while keeping model parameters in full precision. Across CIFAR-10 and CIFAR-100 under varying data heterogeneity ($α\in \{0.1, 0.5, 1.0, \text{IID}\}$), Q-LocalAdam achieves $3.37\times$ optimizer memory reduction with no accuracy loss under moderate heterogeneity and significant improvements under extreme heterogeneity (e.g., +5.74pp on CIFAR-100, $α=0.1$). Multi-seed validation confirms statistical significance ($p<0.01$). In contrast, naive uniform quantization degrades to random performance, demonstrating that distribution-aware design is essential. Q-LocalAdam enables larger models and more concurrent workloads on memory-constrained edge devices without modifying the federated protocol.

Transformer models are rapidly becoming a cornerstone of modern Internet of Things (IoT) applications, yet their computational and memory demands far exceed the capabilities of a single typical ultra-low-power IoT device. We present CATS, a framework for distributed transformer inference on ultra-low-power wireless devices, enabling multiple devices to collaboratively execute models far larger than what a single device can sustain. At its core, CATS is a communication-aware distributed transformer inference scheme co-designed across transformer partitioning, wireless communication and training. It employs SomeGather, a new pruned communication primitive that selectively broadcasts activation columns to reduce communication bandwidth and RAM usage without sacrificing model accuracy. Building on SomeGather, we design a partitioning method that exploits this primitive for efficient model parallelism. To cope with unreliable wireless communication, CATS employs message-dropout during training, which mimics packet losses and yields models that are robust to message loss during inference. In real-world experiments, we show that CATS brings distributed transformer inference to ultra-low-power wireless devices for the first time, with deployments on up to 16 devices that collaboratively execute transformer models up to 14 times larger than what a single device can run.

Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.'' To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5% average accuracy under AWGN and 87.4% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.

Spiking neural networks (SNNs) are biologically inspired energy-efficient models that use sparse binary spike-based communication between neurons, making them attractive for resource-constrained edge devices. Federated learning enables such devices to train collaboratively without sharing raw data. In time-series applications, edge devices often collect data at different time resolutions due to hardware and energy constraints. This temporal heterogeneity poses a fundamental challenge for federated learning: parameters learned at one temporal resolution do not necessarily transfer directly to another, which might result in the naive federated averaging being ineffective. Targeting SNNs and, more broadly, deep networks with stateful neurons, we propose a federated learning framework that addresses this temporal resolution mismatch. We investigate how neuron parameters learned from data at different temporal resolutions and model aggregation should be integrated. We evaluate the proposed framework across two SNN-native benchmark datasets (SHD and DVS-Gesture) under a range of resolution heterogeneity scenarios. Our results show that the proposed adaptation methods can substantially recover accuracy lost due to temporal mismatch, hence enabling each client to train at their local temporal resolution while remaining compatible with the global model.

Gesture recognition is a cornerstone of Human-Computer Interaction (HCI) for smart eyewear, enabling natural and device-free control in augmented reality environments. Traditional vision-based approaches face significant challenges regarding power consumption, computational latency, and user privacy. This paper proposes a lightweight, privacy-preserving gesture recognition system based on the fusion of low-resolution Time-of-Flight (ToF) and Infrared (IR) thermal sensors. We used an 8 times 8 multizone ToF sensor (VL53L8CH) and an 8 times 8 IR array (AMG8833) to capture complementary depth and thermal cues. A compact Convolutional Neural Network (CNN) with a specialized grouped-convolution architecture is designed to fuse these modalities efficiently on a microcontroller (MCU). Experimental results on a custom dataset of 7 static gestures, validated via k-fold cross-validation, demonstrate that the proposed fusion strategy significantly outperforms single-sensor baselines with an accuracy of 92.3% and a macro F1-score of 0.93. Finally, on-device benchmarks on STM32F4 and STM32H7 MCUs confirm the system's suitability for resource-constrained wearables, requiring only 6,343 parameters and achieving millisecond-level inference latency with a total system power of 50 mW.

Contextual bandits (CB) are online sequential decision-making problems under partial feedback that underpin many adaptive services. There is a growing demand to deploy CB agents directly on-device, under strict constraints on memory, compute, and energy. However, standard linear CB algorithms are often impractical for resource-constrained devices with their unfavorable scaling in computational and memory costs. Recently, HD-CB, a CB approach based on hyperdimensional computing principles, has been proposed to model and solve CB problems by moving into high-dimensional spaces. HD-CB offers faster convergence, favorable scalability, and improves memory efficiency compared to linear CB algorithms. However, its learning rule is accumulation-based: the values of action vectors grow over time, requiring high precision. While periodic binarization can prevent overflow in low-precision components, it may discard important information about magnitudes and degrade decision quality. This paper introduces probabilistic HD-CB, a low-precision variant that replaces deterministic accumulation with a probabilistic update rule. At each step, only a random subset of vector components is updated, with a time-decaying update probability, and component values are constrained to a predefined range [-k,+k]. This approach enables low-precision components, prevents overflow without periodic binarization, and reduces the expected update cost in proportion to the fraction of updated components. Off-policy evaluation on standardized synthetic CB benchmarks using the Open Bandit Pipeline shows that probabilistic HD-CB consistently outperforms binarized HD-CB at equal precision, while approaching the performance of HD-CB with as few as 3 bits per component.

The EU Artificial Intelligence Act (Regulation 2024/1689), fully applicable to high-risk systems from August 2026, creates urgent demand for AI architectures that are simultaneously trustworthy, transparent, and feasible to deploy on resource-constrained edge devices. Brain-like neural networks built on the Bayesian Confidence Propagation Neural Network (BCPNN) formalism have re-emerged as a credible alternative to backpropagation-driven deep learning. They deliver state-of-the-art unsupervised representation learning, neuromorphic-friendly sparsity, and existing FPGA implementations that target edge deployment. Despite this momentum, no systematic framework exists for explaining BCPNN decisions -- a gap the present paper fills. We argue that BCPNN is, in the sense of Rudin's interpretable-by-design agenda, an inherently transparent model whose architectural primitives map directly onto established explainable-AI (XAI) families. We make four contributions. First, we propose the first XAI taxonomy for BCPNN. It maps weights, biases, hypercolumn posteriors, structural-plasticity usage scores, attractor dynamics, and input-reconstruction populations onto attribution, prototype, concept, counterfactual, and mechanistic explanation modalities. Second, we introduce sixteen architecture-level explanation primitives (P1--P16), several without analogue in standard ANNs. We provide closed-form algorithms for computing each from quantities the model already maintains. Third, we introduce five design-time Configuration-as-Explanation primitives (Config-P1 to Config-P5) that treat BCPNN hyperparameter choices as an auditable pre-deployment explanation artifact. Fourth, we sketch a roadmap for integration into industrial IoT deployments and discuss EU AI Act alignment, edge feasibility, and Industry 5.0 implications.

The recent growth of on-device Large Language Model (LLM) inference has driven significant interest in device-edge collaborative LLM inference. As a promising architecture, Speculative Decoding (SD) is increasingly adopted where a lightweight draft model rapidly generates candidate tokens to be verified by a powerful target model. However, a fundamental challenge lies in achieving per-token resource scheduling to effectively adapt SD paradigm to resource-constrained edge environment. This paper proposes a Generative Entropy- and Lyapunov-based Adaptive Token Offloading framework, named GELATO, to maximize decoding throughput under energy constraints in a device-edge collaborative SD system. Specifically, an outer drift-plus-penalty loop makes online decisions to establish a reference drafting budget, managing long-term energy-throughput trade-off. Further, a nested entropy-driven generation mechanism executes early exiting to adapt to per-token dynamic generative uncertainty. Theoretical analysis establishes a rigorous performance bound on long-term throughput for GELATO. Extensive evaluations demonstrate that GELATO achieves a globally optimal tradeoff, outperforming state-of-the-art distributed SD architectures by 64.98% in token throughput and reducing energy consumption by 47.47% under resource-constrained environments, while preserving LLM decoding quality.

Power-of-two (PoT) quantization significantly reduces the size of deep neural networks (DNNs) and replaces multiplications with bit-shift operations for inference. Prior work has shown that PoT-quantized DNNs can preserve accuracy for tasks such as image classification; however, their performance on resource-constrained edge devices remains insufficiently understood. While general-purpose edge CPUs and GPUs do not provide optimized backends for bit-shift operations, custom hardware accelerators can better exploit PoT quantization by implementing dedicated shift-based processing elements. However, deploying PoT-quantized models on such accelerators is challenging due to limited support in existing inference frameworks. In addition, the impact of different PoT quantization strategies on hardware design, performance, and energy efficiency during full inference has not been systematically explored. To address these challenges, we propose PoTAcc, an open-source end-to-end pipeline for accelerating and evaluating PoT-quantized DNNs on resource-constrained edge devices. PoTAcc enables seamless preparation and deployment of PoT-quantized models via TensorFlow Lite (TFLite) across heterogeneous platforms, including CPU-only systems and hybrid CPU-FPGA systems with custom accelerators. We design shift-based processing element (shift-PE) accelerators for three PoT quantization methods and implement them on two FPGA platforms. We evaluate accuracy, performance, energy efficiency, and resource utilization across a range of models, including CNNs and Transformer-based architectures. Results show that our CPU-accelerator design achieves up to 3.6x speedup and 78% energy reduction compared to CPU-only execution for PoT-quantized DNNs on PYNQ-Z2 and Kria boards. The code will be publicly released at https://github.com/gicLAB/PoTAcc

Motion blur restoration on consumer mobile devices is typically evaluated using aggregate metrics that obscure performance variation across blur difficulty, masking model behavior under real deployment conditions. This work introduces iPhoneBlur, a difficulty-stratified benchmark of 7,400 image pairs synthesized from high-framerate iPhone 17 Pro videos captured in diverse real-world scenarios. Samples are partitioned into Easy, Medium, and Hard categories through PSNR-guided adaptive temporal windowing, with stratification validated by monotonic 2.2x increase in optical flow magnitude across tiers. Each sample includes comprehensive metadata enabling investigation of ISP-aware and difficulty-adaptive restoration strategies. Spectral analysis confirms synthesized blur exhibits high-frequency suppression patterns consistent with authentic motion degradation. Evaluation of six architectures reveals consistent 7-9 dB performance degradation from Easy to Hard subsets, a substantial gap entirely hidden by aggregate reporting. The benchmark further exposes a domain gap between professional and consumer cameras which targeted fine-tuning substantially recovers. By coupling difficulty stratification with deployment-critical metadata, iPhoneBlur enables systematic assessment of model reliability and failure modes for resource-constrained edge systems.

Visual SLAM is a core component of spatial computing systems, yet deploying learned local feature extractors on microcontroller-class hardware remains challenging due to memory, bandwidth, and quantization constraints. While modern neural descriptors provide strong robustness, their practical adoption is often hindered by system-level bottlenecks that are not captured by FLOP-based efficiency metrics. In this work, we introduce Gideon, a hardware-aware neural feature extractor explicitly designed for resource-constrained devices. Our approach combines relational knowledge distillation from a SuperPoint teacher with differentiable neural architecture search (DNAS) under strict memory and operator constraints. Unlike conventional design pipelines, we treat quantization stability and dynamic-range compactness as first-class objectives. We show that architectural choices such as replacing Batch Normalization with affine layers significantly improve INT8 robustness, and that descriptor dimensionality directly governs quantization resilience. Deployed on STM32N6, Gideon achieves 9.003 ms inference time (111 fps) while remaining below a 1.5 MB memory footprint. Remarkably, INT8 quantization induces negligible degradation and occasionally matches full-precision performance. These results demonstrate that robust learned feature extraction can be reconciled with embedded hardware constraints through holistic hardware-algorithm co-design.

Pneumonia remains a leading global cause of morbidity and mortality, particularly in low-resource settings where access to imaging, laboratory testing, and specialist care is limited. Clinical assessment relies on heterogeneous evidence, including symptoms, respiratory patterns, spoken descriptions, and chest imaging, making frontline screening inherently multimodal. However, many existing computational approaches remain unimodal and focus primarily on radiographs. In this work, we present MultiSense-Pneumo, a multimodal research prototype for pneumonia-oriented screening and triage support that integrates structured symptom descriptors, cough audio, spoken language, and chest radiographs. The system combines deterministic symptom triage, LightGBM-based acoustic classification, domain-adversarial radiograph analysis using ResNet-18, transformer-based speech recognition, and an interpretable late-fusion operator. Each modality is transformed into a normalized concern signal and aggregated into a unified screening estimate. The fusion weights are hand-specified and are treated as heuristic, interpretable parameters rather than learned or clinically optimized values. MultiSense-Pneumo is implemented with offline execution in mind on standard laptop-class hardware, but it is not presented as a deployment-validated or clinically validated diagnostic system. Experimental results demonstrate strong component-level performance of the radiograph pathway under synthetic domain shifts, while also highlighting important limitations, especially reduced abnormal-class recall for cough acoustics and the absence of paired end-to-end multimodal patient evaluation. MultiSense-Pneumo is therefore intended as a framework and component-level prototype for screening and triage research.

The deployment of intelligent reinforcement learning (RL) agents on resource-constrained edge devices remains a fundamental challenge due to the substantial memory, computational, and energy requirements of modern deep learning systems. While large language models (LLMs) have emerged as powerful architectures for decision-making agents, their multi-billion parameter scale confines them to cloud-based deployment, raising concerns about latency, privacy, and connectivity dependence. We introduce BitRL, a framework for building RL agents using 1-bit quantized language models that enables practical on-device learning and inference under severe resource constraints. Leveraging the BitNet b1.58 architecture with ternary weights (-1, 0, +1) and an optimized inference stack, BitRL achieves 10-16x memory reduction and 3-5x energy efficiency improvements over full-precision baselines while maintaining 85-98 percent of task performance across benchmarks. We provide theoretical analysis of quantization as structured parameter perturbation, derive convergence bounds for quantized policy gradients under frozen-backbone architectures, and identify the exploration-stability trade-off in extreme quantization. Our framework systematically integrates 1-bit quantized language models with reinforcement learning for edge deployment and demonstrates effectiveness on commodity hardware.

3D Gaussian Splatting (3DGS) has revolutionized novel view synthesis with high-quality rendering through continuous aggregations of millions of 3D Gaussian primitives. However, it suffers from a substantial memory footprint, particularly during training due to uncontrolled densification, posing a critical bottleneck for deployment on memory-constrained edge devices. While existing methods prune redundant Gaussians post-training, they fail to address the peak memory spikes caused by the abrupt growth of Gaussians early in the training process. To solve the training memory consumption problem, we propose a systematic memory-bounded training framework that dynamically optimizes Gaussians through iterative growth and pruning. In other words, the proposed framework alternates between incremental pruning of low-impact Gaussians and strategic growing of new primitives with an adaptive Gaussian compensation, maintaining a near-constant low memory usage while progressively refining rendering fidelity. We comprehensively evaluate the proposed training framework on various real-world datasets under strict memory constraints, showing significant improvements over existing state-of-the-art methods. Particularly, our proposed method practically enables memory-efficient 3DGS training on NVIDIA Jetson AGX Xavier, achieving similar visual quality with up to 80% lower peak training memory consumption than the original 3DGS.

In this paper, we investigate the Resource-Constrained Project Scheduling Problem (RCPSP) with Time-of-Use (TOU) energy tariffs and machine states, a variant of RCPSP for production scheduling, where energy price is part of the criteria and one highly energy-demanding machine can be in one of the following three states: proc, idle, or off. The problem involves scheduling all tasks, respecting precedence constraints and resource limitations, while minimizing the combination of the overall makespan and the Total Energy Cost (TEC), which varies according to the TOU tariffs, which can take negative values. We propose two novel approaches to solve it: a monolithic Constraint Programming (CP) approach and a Logic-Based Benders Decomposition (LBBD) approach. The latter combines a master problem handling the energy cost solved using Integer Linear Programming (ILP) with a subproblem handling the RCPSP, resolved using CP. Both approaches outperform the monolithic compact ILP counterpart, but the LBBD significantly outperforms the monolithic CP in most cases, especially when the makespan criterion is not included in the objective function, solving to optimality instances with up to 480 tasks. Finally, we propose a way to generalize our LBBD approach to other problems sharing similar characteristics, and applied it to various problems, such as an RCPSP with blocking times & total weighted tardiness criterion, or a flexible job shop.

The deployment of large-scale neural networks within the Open Radio Access Network (O-RAN) architecture is pivotal for enabling native edge intelligence. However, this paradigm faces two critical bottlenecks: the prohibitive memory footprint required for local training on resource-constrained gNBs, and the saturation of bandwidth-limited backhaul links during the global aggregation of high-dimensional model updates. To address these challenges, we propose CoCo-Fed, a novel Compression and Combination-based Federated learning framework that unifies local memory efficiency and global communication reduction. Locally, CoCo-Fed breaks the memory wall by performing a double-dimension down-projection of gradients, adapting the optimizer to operate on low-rank structures without introducing additional inference parameters/latency. Globally, we introduce a transmission protocol based on orthogonal subspace superposition, where layer-wise updates are projected and superimposed into a single consolidated matrix per gNB, drastically reducing the backhaul traffic. Beyond empirical designs, we establish a rigorous theoretical foundation, proving the convergence of CoCo-Fed even under unsupervised learning conditions suitable for wireless sensing tasks. Extensive simulations on an angle-of-arrival estimation task demonstrate that CoCo-Fed significantly outperforms state-of-the-art baselines in both memory and communication efficiency while maintaining robust convergence under non-IID settings.