Underwater Imagery

Accurate seafloor mapping is essential for marine science, archaeology, and environmental monitoring. However, integrating data from different sensors, such as side-scan sonar and optical cameras, collected across separate survey sessions, remains challenging due to positioning drift and sensor offsets. This paper presents a multi-session, multimodal underwater mapping framework based on factor graph optimization. The method jointly optimizes vehicle trajectories, 3D landmark positions, sensor extrinsics, and per-session global alignment transformations. By combining rigid inter-session corrections with local trajectory deformations, it compensates for both inter-session offsets and intra-session distortions from accumulated navigation errors. The proposed methodology was validated on real-world datasets collected along the Catalan coast. Results show measurable improvements in map consistency over both unoptimized and rigid-alignment baselines across all metrics, including Pixel Accuracy and mean Intersection over Union. The method achieves a 3.4% improvement in pixel accuracy over the unoptimized baseline, corresponding to improved semantic labelling across approximately 14700 $\text{m}^2$ of mapped area. Qualitative results further show consistent co-registration between sonar and optical maps, even in the presence of significant trajectory distortions and inter-session misalignments. These findings demonstrate the potential of the proposed framework to generate coherent multimodal seafloor maps from heterogeneous underwater surveys.

Autonomous surface vehicles operating in inland waterways require a persistent representation of both surrounding structures and the water surface. LiDAR-based simultaneous localization and mapping often produces sparse or missing water returns, leaving this operational surface absent from the reconstructed scene. We propose HydroMap, an odometry-decoupled framework that reconstructs water surface elevation from stereo observations and integrates it with the structural map. Per-frame water points form joint cell observations with propagated stereo and pose uncertainty, and successive observations are fused into a persistent probabilistic elevation map. Semantic map conversion then combines the elevation map with structural geometry in a unified 2.5D representation of water, boundaries, structures, and overhead regions. On the Pohang Canal and Leuven Vaart datasets, the elevation RMSE remains below 5 cm relative to LiDAR references expressed in the same map frame. The elevation and semantic maps are published at 2 Hz and 1 Hz, respectively. HydroMap thereby complements LiDAR maps with a persistent representation of the water surface for downstream navigation in inland waterways.

Open-vocabulary semantic segmentation (OVSS) relies on vision-language alignment to recognize arbitrary text-defined categories, yet this alignment is fragile under continual test-time distribution shift. Our diagnostic analysis reveals that entropy minimization drives patch-level class collapse, continual updates erode vision-language alignment, and redundant gradients from low-shift samples waste computation. We propose Diversify, Anchor, and Filter (DAF), a stabilization framework that augments entropy-based adaptation with a marginal diversity loss that resists collapse, a cross-modal anchor consistency loss that constrains feature drift relative to a frozen source model, and feature salience filtering that skips low-value backward passes to offset part of the source-anchor overhead. We evaluate on five datasets spanning natural scenes, autonomous driving, underwater imagery, and remote sensing with their corrupted variants. Across the evaluated continual shifts, DAF remains stable where entropy minimization collapses, improving mIoU by over 8 points on Pascal VOC20-C, over 9 points on LoveDA, and over 3 points on Foggy Cityscapes compared to the source model, and is robust to aggressive adaptation and learning rate choices.

Recent Vision-Language Models (VLMs) have achieved remarkable success in visual understanding, driven by the growing availability of high-quality image-text pairs. However, the performance of VLMs often degrades in the video domain due to the essential need for temporal understanding and the scarcity of large-scale annotated video data. In this work, we focus on marine video understanding, which brings further challenges: first, it requires substantial domain expertise; and video VLMs usually struggle with localizing and interpreting critical information from marine videos, as the informative events are typically sparse, unpredictable, and unevenly distributed. To address these challenges, we carefully curate the first event-centric marine video understanding dataset called MarineEVT, which features 20K multi-task, video-level visual question-answering pairs spanning multiple dimensions of marine understanding and analysis. Meanwhile, based on MarineEVT, we decompose marine video understanding as an Event-centric Visual Tool-integrated Reasoning process EVT-R1 for short, where we leverage powerful visual tools to drive the model to localize and interpret critical information aligned with visual questions and human intent. To demonstrate its effectiveness, we compare EVT-R1 against 11 SOTA VLMs in different settings. EVT-R1 outperforms the top open-source and top commercial models by 5.22 and 11.09, respectively. MarineEVT and EVT-R1 lay the foundation for ecological discovery and marine education, fostering the development of VLMs capable of interpreting marine dynamics, reasoning about ecological interactions, and supporting sustainable ocean video understanding and analysis.

Reliable feedforward underwater 3D reconstruction remains challenging due to severe light attenuation and backscattering, which degrade visual quality and disrupt feature consistency across views, leading to inaccurate multi-view geometry. To address this issue, we propose WAT3R, a feed-forward framework for reconstructing 3D scenes directly from underwater images. By leveraging degradation adaptation as a geometry-constrained process, WAT3R integrates a lightweight neural adaptation module to flexibly account for these underwater imaging effects, thereby improving multi-view reconstruction quality. Implemented in a single forward pass, WAT3R directly and efficiently outputs pixel-aligned 3D point maps and camera poses from underwater videos, allowing a high-quality underwater 3D reconstruction. Experiments conducted on the FLSea, SQUID, and USOD10K datasets show that our method consistently outperforms state-of-the-art approaches on 3D reconstruction tasks, including multi-view/monocular depth estimation and camera pose estimation.

This paper introduces a method for real-time processing and transmission of autonomous underwater vehicle (AUV) imagery over low-bandwidth communication links. It leverages artificial intelligence (AI) techniques to identify a set of images that best represent an entire dataset, or automatically finds the most similar images to a given query image for transmission to operators. Combined with metadata of a larger set of images, compressed versions of the selected images can be transmitted over satellite communication links or underwater modems, and provide operators on shore with information about the type of imagery the AUV is collecting while it is still deployed. Data from three deployments off the coast of the UK and in Gran Canaria using different AUVs and imaging systems demonstrate the method in the field. It achieved an almost 400,000-fold reduction in data volume compared to the raw data size, enabling transmission of data summaries of a 2-hour 47-minute-long mapping mission in just over 34 minutes over low-bandwidth satellite communication.

This paper presents a framework for multi-session mapping of underwater environments utilizing an affordable action camera. The Visual-Inertial data are augmented by water depth recordings from a dive computer. SVIn2, an open-source VI-SLAM framework, is utilized to generate a trajectory and a sparse reconstruction for each session. Utilizing the keyframes extracted from SVIn2 and the estimated camera poses, a Structure-from-Motion (SfM) framework, COLMAP, is employed for global optimization and to produce a dense reconstruction of the target environment. The presence of calibration targets at fixed locations, when available, is used to estimate the coordinate transformation between different data collection sessions, thus transforming the different sessions into the same coordinate frame. The proposed pipeline is employed for the mapping of a shipwreck off the coast of Barbados. For the first time, both the exterior and the accessible interior parts of the wreck were mapped in two sessions, while a third session employed two cameras with different fields of view.

Estimating 3D geometry in underwater environments presents unique challenges due to light attenuation, scattering, and the absence of large-scale, high-quality 3D annotations. Pioneering methods rely on massive dense annotations that are impractical in underwater settings. In this paper, we propose Wat3R, a cross-domain semi-supervised learning framework designed to adapt feed-forward 3D reconstruction models from air to underwater scenes. Uniquely, our method eliminates the need for any annotated underwater data following a teacher-student architecture, that learns robust geometry representations merely on abundant unlabeled real underwater video footage. We also design a cross-view consistency loss that leverages geometric cues from other views to compensate for the information degradation in the current view caused by water attenuation and scattering. Furthermore, considering the lack of comprehensive evaluation benchmarks, we construct Water3D, a diverse dataset covering various water bodies and underwater scenarios, designed for geometric task evaluation. Experimental results demonstrate that Wat3R outperforms current state-of-the-art methods in underwater multi-view depth estimation and point cloud reconstruction. The dataset and code are available at https://github.com/LSXI7/Wat3R .

This paper proposes a robust image processing framework for underwater robot-based construction environment monitoring, targeting complex degradations observed in real marine environments. Unlike conventional approaches that mainly consider absorption and backscattering, real underwater imagery is strongly affected by depth-dependent forward scattering blur and particle-induced degradations such as marine snow. To address this, we introduce a staged processing pipeline that sequentially models background degradation via depth-aware forward scattering and foreground degradation using realistic marine snow patterns extracted from real images. The resulting synthetic data are used to retrain an existing Joint-ID network without modifying its architecture, enabling an isolated evaluation of dataset realism. In addition, a lightweight post-processing scheme is applied to enhance contrast and structural clarity. Experiments on real underwater datasets collected in Korean coastal environments demonstrate consistent improvements in visual quality and UIQM scores. The results indicate that explicitly modeling forward scattering and realistic particle effects effectively reduces the synthetic-to-real gap and improves practical applicability in real-world underwater robotic operations.

Automated classification of marine species from underwater imagery is essential for scalable ocean biodiversity monitoring and conservation policy. Existing approaches struggle with severe domain shift across collection platforms, fine-grained visual similarity between closely related species, and uneven annotation granularity, where many specimens can only be identified to genus or a coarser taxonomic rank. We present a taxonomy-aware deep learning framework that aligns both the training loss and the inference rule with the hierarchical structure of biological classification, combining a taxonomy-weighted loss, minimum-risk Bayesian inference, multi-scale feature encoding, and independent per-rank classification heads. Evaluated on the FathomNet 2025 dataset1 (79 marine classes across seven taxonomic ranks), the system achieves a mean taxonomic distance of 1.581, within 3% of the 1st-place solution (1.535), with the largest gains from metric-aligned inference and simple, decoupled components that generalize better than learned dependencies under distribution shift.

Underwater scene reconstruction is essential for immersive exploration of aquatic environments, yet remains challenging due to complex participating-media effects such as absorption and scattering, as well as the limited field of view (FoV) of conventional cameras. Although combining panoramic imaging with 3D Gaussian Splatting (3DGS) offers a promising direction for photorealistic underwater rendering, traditional 3DGS struggles with both spherical projection distortion and underwater medium degradation. In this paper, we propose \textbf{Underwater360}, a physics-informed omnidirectional 3DGS framework for underwater panoramic scene reconstruction. First, we introduce an Omnidirectional Gaussian Splatting module that performs ray casting directly in spherical camera space instead of relying on 2D projection approximations, thereby reducing geometric distortions under 360$^\circ$ FoV. Second, we design a physics-based appearance-medium modeling architecture with pose-conditioned appearance embeddings to explicitly decouple intrinsic scene radiance from depth-dependent backscatter and attenuation, enabling physically grounded scene appearance restoration. Finally, we establish a new panoramic underwater benchmark dataset containing both synthetic and real-world scenes. Extensive experiments demonstrate that Underwater360 achieves superior performance in underwater novel view synthesis and scene appearance restoration, delivering improved rendering quality and cross-view consistency in complex underwater environments. The code and datasets are released at https://github.com/SwcK423/Underwater360

Sonar is often the only modality suitable for high-resolution imaging underwater due to light attenuation and turbidity. Forward-looking imaging sonar provides measurements over range and horizontal angle but collapses vertical structure into a flat image, creating ambiguities that make 3D recovery challenging. A common use case for imaging sonar is underwater terrain mapping (bathymetry), yet current methods require many views, expensive multi-sensor setups, or significant training data, which limits use and adaptability to new environments. We present a training-free method that recovers bathymetry from a single sonar image in under 30 seconds via differentiable rendering, conditioned on a known seafloor tilt. To our knowledge, this is the first differentiable rendering approach for single-view height recovery in sonar. Our method implements differentiable sonar ray tracing and optimizes an explicit height field to reproduce the target image. On synthetic datasets, our approach outperforms a supervised CNN under distribution shift and remains close on rough terrain, while the CNN wins in-distribution. By modeling physically grounded priors of the sonar process, our method adapts across sensor configurations and environments without training data.

High-resolution seafloor mapping necessitates stable and precise positioning for underwater robots. This paper introduces a novel mathematical model for SeaVis remotely operated towed vehicles (ROTVs) and develops a gain-scheduled linear-quadratic regulator (LQR) for robust depth and attitude control. We validate the approach in a high-fidelity simulation, benchmarking the LQR against a conventional PID controller over a challenging seabed profile. The presented results demonstrate the LQR's superior performance, with significantly enhanced robustness to disturbances, greater control efficiency, and substantially reduced flap actuation. The gain scheduling also confirms the controller's effectiveness across the full operational velocity range. The complete simulation environment and controller are open-sourced.

This paper introduces a novel automatic coverage path planning algorithm for bathymetry surveying with unmanned surface vehicles. The detection range of the mapping sensor employed - a multibeam echo sounder - is heavily influenced by local seafloor depths. Hence, a path designed to uniformly cover the sea surface does not guarantee uniform coverage of the seafloor. Yet this is currently the typical process for bathymetric surveys, with the simplistic boustrophedon scheme along manually selected waypoints at constant depths being the most widespread planner used. The proposed scheme incorporates coarse prior depth information to pre-process the target region and adaptively guide path generation and sensing range configuration. By explicitly accounting for depth variations, the proposed algorithm designs a coverage path with optimised spacing between survey passes that adjusts the sensing beam aperture to achieve more consistent seafloor coverage. The proposed method is shown to offer significant improvements in both synthetic and real-world scenarios. Validations in challenging synthetic terrains achieves coverage ratios beyond 99%, a marked improvement when compared with traditional boustrophedon paths revealing a maximum 75% coverage. The same trend appears in realistic simulations using real bathymetric data from a coastal harbour, with coverage reaching over 92%, and significantly surpassing boustrophedon sweeps with coverage rates below 65%. Beyond improved performance, the scheme also brings a fully automated design, suitable for autonomous marine vehicles, thus offering practical utilities for real-world applications.

Quantifying fish community structure is essential for understanding biodiversity and ecosystem responses in a changing environment, yet existing survey methods provide limited high-frequency, quantitative observations. Conventional approaches, including catch-based methods, underwater visual censuses, and environmental DNA metabarcoding, either require intensive labor or lack reliable estimates of abundance and biomass. Here, we develop an automated framework for quantifying fish communities from underwater video using computer vision. Using videos acquired with a custom-made stereo camera system, the framework integrates deep learning-based fish identification, multi-object tracking, and 3D reconstruction to estimate species-level abundance and biomass. We applied the approach to a reef fish community over a 20-day period with hourly daytime observations, revealing dynamic fluctuations in species richness, abundance, and biomass associated with changes in species composition. By comparing fish communities estimated from visual census and environmental DNA surveys, we demonstrate that our method provides complementary strengths for continuous, non-invasive, and quantitative monitoring of consistently observed species. This approach provides a scalable foundation for long-term monitoring and advances the capacity to resolve fine-scale temporal dynamics in fish communities.

Accurate seabed mapping is essential for habitat monitoring and infrastructure inspection. In turbid, shallow coastal waters, such as shellfish aquaculture farms, the effectiveness of traditional optical methods is limited. Autonomous surface vehicles (ASVs) equipped with forward-looking sonar (FLS) offer a promising alternative. However, existing sonar-based systems face challenges in achieving fine resolution mapping over long trajectories due to low-resolution positioning measurements and accumulated drift over long trajectories. In this paper, we present a drift-resilient seabed mapping framework that integrates local FLS frame alignment using the Fourier-Mellin transform (FMT) with global trajectory optimization based on an extended Kalman filter (EKF) that fuses global positioning system (GPS), inertial measurement unit (IMU), and compass data. A variance-based image blending strategy is used to further reduce visual artifacts in overlapping regions. Field trials on a structured oyster farm site show that our framework helps reduce drift in RMSE by 9.5% relative to the FMT-only baseline. This framework also enables sub-meter reconstruction accuracy and preservation of high-resolution textures needed for oyster inventory estimation within the mapped areas.

Reconstructing realistic underwater scenes from underwater video remains a meaningful yet challenging task in the multimedia domain. The inherent spatiotemporal degradations in underwater imaging, including caustics, flickering, attenuation, and backscattering, frequently result in inaccurate geometry and appearance in existing 3D reconstruction methods. While a few recent works have explored underwater degradation-aware reconstruction, they often address either spatial or temporal degradation alone, falling short in more real-world underwater scenarios where both types of degradation occur. We propose MarineSTD-GS, a novel 3D Gaussian Splatting-based framework that explicitly models both temporal and spatial degradations for realistic underwater scene reconstruction. Specifically, we introduce two paired Gaussian primitives: Intrinsic Gaussians represent the true scene, while Degraded Gaussians render the degraded observations. The color of each Degraded Gaussian is physically derived from its paired Intrinsic Gaussian via a Spatiotemporal Degradation Modeling (SDM) module, enabling self-supervised disentanglement of realistic appearance from degraded images. To ensure stable training and accurate geometry, we further propose a Depth-Guided Geometry Loss and a Multi-Stage Optimization strategy. We also construct a simulated benchmark with diverse spatial and temporal degradations and ground-truth appearances for comprehensive evaluation. Experiments on both simulated and real-world datasets show that MarineSTD-GS robustly handles spatiotemporal degradations and outperforms existing methods in novel view synthesis with realistic, water-free scene appearances.

Object detection models typically perform well on images captured in controlled environments with stable lighting, water clarity, and viewpoint, but their performance degrades substantially in real-world underwater settings characterized by high variability and frequent occlusions. In this work, we address these challenges by introducing a novel data augmentation framework designed to improve robustness in dense and unconstrained underwater scenes. Using the DeepFish dataset, which contains images of fish in natural environments, we first generate bounding box annotations from provided segmentation masks to construct a custom detection dataset. We then propose a pseudo-simulated annealing-based augmentation algorithm, inspired by the copy-paste strategy of Deng et al. [1], to synthesize realistic crowded fish scenarios. Our approach improves spatial diversity and object density during training, enabling better generalization to complex scenes. Experimental results show that our method significantly outperforms a baseline YOLOv10 model, particularly on a challenging test set of manually annotated images collected from live-stream footage in the Florida Keys. These results demonstrate the effectiveness of our augmentation strategy for improving detection performance in dense, real-world underwater environments.

We present E2E-WAVE, the first end-to-end learned waveform generation system for underwater video multicasting. Acoustic channels exhibit 20--46% bit error rates where forward error correction becomes counterproductive -- LDPC increases rather than decreases errors beyond its decoding threshold. E2E-WAVE addresses this by embedding semantic similarity directly into physical layer waveforms: when decoding errors are unavoidable, the system preferentially selects semantically similar tokens rather than arbitrary corruption. Combining VideoGPT tokenization (1024x compression) with a trainable waveform bank and fully differentiable OFDM transmission, E2E-WAVE achieves +5 dB (19.26%) PSNR and +0.10 (14.28%) SSIM over the strongest FEC-protected baseline in less challenging underwater channel (NOF1) while delivering real-time 16 FPS video at 128x128 resolution over 2.3 kbps channels -- impossible for conventional digital modulation. The performance gap only increases in harsher channels (BCH1, NCS1). Trained on a single channel, E2E-WAVE generalizes to unseen underwater environments without retraining, while HEVC fails at sub-5 kbps rates and SoftCast's AWGN assumptions collapse on frequency-selective channels.

Benthic habitat mapping is fundamental for understanding marine ecosystems, guiding conservation efforts, and supporting sustainable resource management. Yet, the scarcity of large, annotated datasets limits the development and benchmarking of machine learning models in this domain. This paper introduces a thorough multi-modal dataset, comprising about a million side-scan sonar (SSS) tiles collected along the coast of Catalonia (Spain), complemented by bathymetric maps and a set of co-registered optical images from targeted surveys using an autonomous underwater vehicle (AUV). Approximately 36000 of the SSS tiles have been manually annotated with segmentation masks to enable supervised fine-tuning of classification models. All the raw sensor data, together with mosaics, are also released to support further exploration and algorithm development. To address challenges in multi-sensor data fusion for AUVs, we spatially associate optical images with corresponding SSS tiles, facilitating self-supervised, cross-modal representation learning. Accompanying open-source preprocessing and annotation tools are provided to enhance accessibility and encourage research. This resource aims to establish a standardized benchmark for underwater habitat mapping, promoting advancements in autonomous seafloor classification and multi-sensor integration.