Aerial Manipulation

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

In recent years, aerial manipulation has attracted increasing attention as a key to expand the application of aerial robots. In this work, we focus on two major research directions for achieving versatile aerial manipulation: (i) acquiring high environmental adaptability using soft manipulators, and (ii) expanding the feasible wrench space by distributing thrusters along the manipulator. However, no aerial robot has simultaneously satisfied these two requirements. Therefore, in this paper, we propose a morphing rotor-distributed aerial robot with flexible continuum links that achieves both high shape adaptability and an expanded wrench space. The flexible continuum links function as soft manipulators, passively conforming to the shape of the environment, while the thrusters distributed along the continuum links expand the feasible thrust wrench space and enable the end-effector to exert large interaction forces. To realize the proposed robot, it is essential to suppress vibrations of the lightweight continuum links. Thus, we develop a composite leaf-spring structure that provides both high torsional and vertical stiffness, and vibration-suppressing control methods. Using these implementations, we demonstrate stable flight and a variety of aerial manipulation tasks. To the best of our knowledge, this is the first work to realize aerial manipulations using flexible links with an integrated thruster.

Aerial grasping is a remarkable capability exhibited by predatory birds, allowing them to capture prey through highly coordinated maneuvers in flight. Inspired by this capability, researchers have developed various formulations to reproduce such maneuvers through trajectory optimization. However, two limitations remain in practice. First, the resulting optimization problem is highly nonconvex and sensitive to initialization, making high-quality solutions difficult to obtain under a limited computational budget. Second, prescribed numerical objectives are human-designed abstractions that describe successful grasping through a limited set of mathematically tractable quantities and may not fully capture what determines task success. We investigate how learning can address these limitations within an analytical planner. Accordingly, a trajectory prior is first learned from optimized motions and then evolved through a CEM-based process that evaluates sampled initializations with the deployed optimizer and retains favorable ones as new supervision. An Execution-Aware Critic learns from contact, lift, and completion outcomes to assess whether the optimized trajectories are likely to succeed in physical execution. Its frozen energy can further serve as a differentiable grasping cost, allowing execution data to directly shape trajectory generation. Simulation and real-world experiments demonstrate improved optimization reliability, trajectory consistency, and grasping performance.

Uncrewed Aerial Manipulators (UAMs) extend the capabilities of Uncrewed Aerial Vehicles (UAVs) from perception to physical interaction. Among various aerial interactions, push-and-pull operations are fundamental manipulation primitives that require sustained horizontal forces while maintaining stable flight. In this paper, we propose DuctAM, a compact aerial manipulation platform that enhances horizontal force capability for push-and-pull interactions using two ducted fans integrated along the quadrotor interaction axis. An attitude-force decoupled control scheme enables controllable horizontal forces without requiring large attitude changes. Extensive real-world experiments are conducted to validate the DuctAM. Figure-eight trajectory tracking experiments demonstrate stable flight and accurate motion control in both quad and duct modes. Force-measurement experiments quantify the decoupled longitudinal force capability of DuctAM. Finally, representative push-and-pull interaction tasks, including cart pushing, door closing, and drawer opening, verify the practical effectiveness of DuctAM. The results show that DuctAM achieves significantly improved horizontal interaction force capability while maintaining stable flight compared with conventional UAVs.

We present a robust contact-aware control framework for aerial writing on an underactuated platform. The framework combines nonlinear model predictive control (NMPC) for accurate end-effector position and normal-force tracking at small reference penetration depths, with consistent performance across controller tunings, with whole-body incremental nonlinear dynamic inversion (INDI) for robustness to frictional and aerodynamic disturbances during contact. The proposed controllers are validated on a quadrotor-based aerial manipulator with a rigid, single-link, one-degree-of-freedom (DoF) arm in simulation and real-world experiments. The aerial writing experiments span vertical and inclined surfaces, multiple reference forces, different friction conditions, and wind disturbances. The results demonstrate that robust simultaneous five-DoF end-effector pose and contact-force tracking is achievable on a standard underactuated quadrotor with a simple, rigid, single-link arm, without requiring a fully actuated platform, a complex arm, or dedicated force/torque sensing.

Flying humanoids are expected to perform tasks in diverse environments, while their existing locomotion is mainly limited to aerial flight and ground walking. The capability to move in complex three-dimensional space can greatly expand their application range. For such walking motion on ceilings and similar anti-gravity environments, whole-body MPC is effective. However, the discontinuous changes in dynamic structure accompanying contact switching during walking can induce thrust spikes, resulting in control instability. Therefore, in this work, we propose and implement a real-time whole-body MPC framework for anti-gravity bipedal walking. First, we formulate whole-body MPC using the time derivative of thrust, namely thrust-rate, as the control input. This formulation guarantees continuity of the thrust trajectory during contact switching while preserving the sparse structure of the optimal control problem for fast computation. Second, we address the lack of natural support forces in anti-gravity environments. We introduce lower bounds on the foot-normal component of the contact force, and smoothly transfer them during the doublesupport phase. Finally, we implement the proposed framework and demonstrate anti-gravity walking by a flying humanoid through simulation and a hardware experiment. To the best of our knowledge, this is the first demonstration of multi-contact whole-body MPC for a transformable aerial robot and walking by a flying humanoid beyond the ground.

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators suffer from strong position-attitude coupling, whereas fully actuated platform designs often face structural complexity, limited payload capacity, and insufficient torque output. This paper presents FAM-DQ, a dual-quadrotor based fully actuated aerial manipulator designed for high-torque physical interaction tasks. By mounting two quadrotor propulsion modules at the ends of a central frame through passive joints, while using a gear-driven servo to regulate the pointing direction, FAM-DQ achieves decoupled $6$-DoF end-effector control with omnidirectional manipulation capability and enhanced torque output. Experiments including trajectory tracking, attitude tracking, static torque measurement, and screw driving validate the proposed design. FAM-DQ achieves a maximum torque of $1.019~\mathrm{N}\cdot\mathrm{m}$ with a total mass of $0.447~\mathrm{kg}$, corresponding to a torque-to-mass ratio of $2.28~\mathrm{N}\cdot\mathrm{m/kg}$.

Contact-based industrial inspection requires aerial platforms to maintain stable interaction while rejecting disturbances. Underactuated aerial manipulators present control challenges due to the dynamic coupling between vehicle attitude and force generation. This paper proposes a robust control framework for an underactuated hexarotor equipped with a 1-DoF manipulator to perform sustained contact inspection. The architecture integrates integral-augmented Sliding Mode Control (SMC) for trajectory tracking with an admittance control law for force regulation. The contact force is mapped to a feedforward attitude term, while the 1-DoF arm actively compensates for the tilt to maintain surface alignment. Software-in-the-loop simulations demonstrate that the SMC-based approach achieves superior tracking and coupling rejection compared to traditional PID. Furthermore, the interaction strategy achieved precise force regulation with an RMSE of 0.12N and was able to stably exert up to 20N force, confirming the system's efficacy for stable, reliable contact-based inspection.

Aerial manipulation with multirotor platforms enables physical interaction in complex environments, but rotor-induced airflow remains a critical limitation for tasks involving airflow-sensitive targets or surroundings. This paper presents an optimization-based design framework for modular aerial manipulators that jointly considers task wrench feasibility, end-effector placement, and airflow exposure constraints. We first introduce a novel categorization of target-side airflow tolerance and formulate the corresponding exposure requirements as geometric constraints. To efficiently model rotor-induced airflow, we introduce a compact cone-sphere envelope that approximates the spreading structure of a quadrotor's airflow while preserving computational tractability for optimization. Building on this formulation, we propose a reconfiguration optimization that adapts a modular aerial manipulator to diverse task wrench requirements while enforcing both target-side airflow exposure and intra-platform airflow interference constraints. Unlike prior designs that assume a fixed end-effector location, the proposed framework optimizes the end-effector placement together with the platform configuration. Scalability experiments and ablation studies validate the effectiveness of the proposed framework.

Aerial robots are increasingly moving from remote observation toward physical interaction with objects, surfaces, structures, loads, and surrounding flows. This review argues that aerial manipulation cannot be understood as classical manipulation simply mounted on a flying base. Because flying agents remain aloft through continuous momentum and energy exchange with the surrounding medium, support, locomotion, stabilization, and task-directed interaction are intrinsically coupled. Building on broad views of manipulation as intentional environmental regulation through physical interaction, we propose a medium-aware interpretation of aerial manipulation in which interaction may be mediated by contact, by the surrounding fluid, or by both. The review organizes biological and robotic examples into a repertoire of interaction modes and a capability ladder, then develops an actuation-geometric viewpoint in which redundancy induces task-equivalent fibers. Internal motion along these fibers can trade energy for active readiness, aerodynamic promptness, and passive medium coupling. This perspective clarifies why aerial manipulation is difficult, why biological flyers remain broader than robotic systems, and how future platforms may command forces while also shaping how the medium acts back on them.

Aerial physical interaction represents a promising direction for next-generation unmanned aerial vehicles (UAVs), but it requires an aerial platform that can exert contact forces while maintaining stable flight. For close-proximity tasks, this translates into three coupled design requirements: multidimensional wrench generation for stable contact, compactness for maneuverability and safety in confined spaces, and reduced lateral airflow toward the target when generating horizontal force. This article presents FLOAT Drone, a fully actuated coaxial UAV with servo-driven control surfaces for close-proximity physical interaction. The coaxial dual-rotor layout provides a compact propulsion layout, while the control surfaces, immersed in the rotor downwash, generate lateral forces and moments for 6-DoF wrench generation. A force-matched computational fluid dynamics (CFD) comparison with a tilted-rotor alternative quantifies the reduction in target-facing lateral airflow. To account for nonlinear rotor--control-surface coupling in the rotor wake, a high-fidelity polynomial aerodynamic wrench model is identified from precision force measurements and embedded in a constrained nonlinear allocator for real-time wrench tracking. Comparative flight and interaction experiments show that the proposed framework improves control accuracy over linear allocation baselines, rejects ground-effect and payload disturbances, and enables close-proximity drawer push--pull manipulation through a $2~\mathrm{cm}$ handle clearance.

Continuum manipulators mounted on multi-rotor UAVs enable compliant aerial manipulation, but payloads and propeller downwash amplify out-of-plane bending and twisting that degrade end-effector pose accuracy. To address this problem, we present a universal-joint-based continuum manipulator designed to improve resistance to out-of-plane deformation during aerial manipulation. The proposed design uses a tubular backbone with spring-reinforced universal joints and an integrated conduit for internal routing and fluid delivery. We evaluate the design in still air and under peak propeller downwash across varying payloads, and benchmark it against a prior Nitinol-backbone CM. Bench tests show improved resistance to out-of-plane deformation across all conditions. Under peak downwash, the proposed design reduces mean error by 2.5-4x in yaw, 2-45x in y-axis, and up to 5x in roll compared to the NiTi-backbone design. We further analyze hover stability through in-flight coupled-disturbance tests over varying payloads and actuation speeds, and demonstrate the system in water sampling, spot spraying, and object transport.

Quadrotors offer the agility needed to rapidly transport suspended payloads during time-critical applications, including search-and-rescue and medical delivery. While suspended-payload transport and traversal for these missions are well studied, the highly dynamic targeted release of the payload remains comparatively underexplored. State-of-the-art approaches typically rely on model-based trajectory optimization and tracking; however, these methods often yield sub-optimal performance due to conservative feasibility constraints, tracking errors, and the inherent difficulty of analytically modeling flexible rope dynamics. To overcome these limitations, we propose a hybrid simulation framework that couples a high-fidelity analytical quadrotor model with a physics solver for complex rope and payload interactions. By exchanging forces between the two domains at every step, we obtain a physically accurate simulation of the suspended-payload system. Leveraging this environment, we train a deep reinforcement learning (RL) policy that executes agile, accurate payload throws to designated targets. Deployed zero-shot on hardware, our RL policy pushes the boundary of the agility-accuracy trade-off, outperforming the model-based baseline by reducing the landing error by up to 50% and the throw duration by up to 30%. Ablation studies confirm that the coupled simulation is the key enabler of these gains. We further show that the same pipeline trains a policy driven by visual observations rather than an explicit state estimate, achieving accuracy comparable to that of the state-based policy. To accelerate future research in dynamic aerial manipulation, we open-source the simulator to the community upon acceptance.

Aerial manipulators enable physical interaction in hard-to-reach environments; however, the combined problem of direct whole-body aerial manipulation under rapid arm motion, payload changes, and related unknown dynamic uncertainty remains a largely unsolved problem. We present a hierarchical control framework that combines Reinforcement Learning (RL) with an inner-loop dynamics estimator to address this problem. The RL outer loop maps desired 6-degrees-of-freedom (DOF) end-effector targets to coordinated whole-body commands, enabling direct task-driven control without relying on a fully accurate coupled dynamic model in the policy layer. An inner loop then tracks these commands while compensating for transient inertial shifts and uncertainty during execution via a dynamics estimator scheme without requiring system model knowledge. We validate the proposed approach on a custom quadrotor equipped with a 3-DoF manipulator through hardware experiments under varying payload conditions. Compared with RL+PID and RL+INDI+PID baselines, the proposed method reduces end-effector tracking error and improves task success rate across the tested hardware conditions. These results show that combining learned whole-body coordination with estimator-based low-level compensation improves the precision and robustness of aerial manipulation under changing operating conditions.

Object placement is a fundamental component of aerial manipulation tasks, yet existing systems typically require the desired placement position to be specified explicitly in metric coordinates. Such interfaces are not intuitive and require users to reason about coordinate frames and scene geometry, making them difficult to use in practical deployments. In contrast, humans often communicate spatial goals through a combination of language and pointing gestures. Inspired by this observation, we present AERMANI-PLACE, a framework for language-guided object placement with aerial manipulators. Given a scene image and a natural language instruction, an image editing model generates a modified version of the scene containing a visual marker that indicates where the object should be placed. This marker is then grounded into the physical environment using depth observations to recover a metric place point, after which a placement trajectory is generated and executed by the aerial manipulator. We evaluate the proposed approach on a test set of 100 language-guided placement tasks and demonstrate successful execution on a real aerial manipulation platform. Experimental results show that the proposed method reliably infers placement locations from language instructions with an average success rate of 87% on the test-set and transfers effectively to real-world aerial manipulation with an average success rate of 72%. Video: https://youtu.be/SgwwgLBsv0g

Aerial manipulation systems have long suffered from representation coupling in end-to-end control, as platform-level Unmanned Aerial Vehicle (UAV) movement and end-effector-level arm manipulation differ substantially in action scale, dynamics, and control objectives. In this paper, we propose AIR-VLA+, a flow matching action generation architecture specifically designed for aerial manipulation, featuring cascaded dual-action decoders and an asymmetric feature-level Mixture of Experts (MoE). We construct cascaded manipulation and movement decoders, allowing the UAV to unidirectionally observe the manipulator's intent during movement to achieve workflow coordination, while isolating the impact of UAV movement information backpropagation on arm manipulation stability. Addressing the characteristic that UAV movement is highly dependent on high-level semantics and responsible for task state transitions in aerial manipulation, we design an input feature enhancement module for the UAV movement decoder. This module introduces an implicit visual grasp projector to perceive the interaction state between the gripper and the object, and injects compressed global semantic features. Within the UAV movement decoder, we deploy an implicit MoE architecture, enabling different movement experts to spontaneously exhibit capacity inclinations for various task stages during training. Through dense soft blending computation on the feature manifold, the UAV movement is endowed with stronger task-stage adaptability. Experiments on the standardized AIR-VLA benchmark demonstrate that our method comprehensively surpasses all baselines with an overall average score of 48.0. The overall task completion score improves by 80.2% compared to the single-head $π_{0.5}$ policy, effectively mitigating the heterogeneous coordinated control conflicts of composite robots.

Unmanned aerial vehicles (UAVs) are increasingly being deployed in logistics, service robotics, and other real-world applications, creating a growing demand for autonomous payload acquisition and delivery. Existing approaches typically assume pre-attached payloads or rely on specialized grippers, leaving versatile end-to-end aerial delivery largely unresolved, where different payloads induce highly variable flight dynamics, requiring a single policy to adapt online without manual calibration or explicit system identification. To this end, we study \textbf{A}utonomous \textbf{A}erial Manipulation via \textbf{Co}ntextual \textbf{Co}ntrastive Meta Reinforcement Learning (\textbf{\textit{Aco2}}), a fully autonomous aerial delivery setting in which a quadrotor equipped with a lightweight hook continuously picks up, transports, and delivers diverse handle-equipped objects between randomized locations, all without human intervention. First, we design a contextual observation encoder that infers a compact latent context from recent interaction history, enabling the policy to adapt online to payload-dependent dynamics. To further improve the quality of this context, we introduce a contrastive objective that structures the context embedding around task-relevant variations, improving generalization across diverse payloads without requiring explicit system identification. Trained entirely in simulation with extensive domain randomization, \textit{Aco2} can be directly deployed on a physical quadrotor without real-world fine-tuning.

Reliable midair docking between small unmanned aerial vehicles (UAVs) is essential for modular aerial cooperation and manipulation, but it requires precise relative-pose control and repeatable platform under tight thrust and payload constraints. We present a dual-drone docking platform where two quadrotors operate in a leader-follower formation and dock using a lightweight modular frame with passive magnetic latching. A progress-aware mission supervisor manages phase transitions: approach, alignment, capture, and settle. This platform integrates a complete hardware-software stack (ROS 2 with Crazyflie/PX4 interfaces) and synchronized logging for benchmark evaluation. We evaluate the platform in simulation and real-world experiments using quantitative metrics such as formation error, baseline and yaw consistency, docking success rate, time-to-dock, and failure-mode statistics. The platform enables statistically grounded comparison of docking supervision and synchronization strategies and provides a practical testbed for modular aerial cooperation and repeatable midair aerial manipulation.

Accurate dynamics models are critical for aerial manipulators operating under complex tasks such as payload transport. However, modeling these systems remains fundamentally challenging due to strong quadrotor-manipulator coupling, delayed aerodynamic interactions, and regime-dependent dynamics variations arising from payload changes and manipulator reconfiguration. These effects produce residual dynamics that are simultaneously cross-coupled, history-dependent, and nonstationary, causing both analytical models and purely offline learned models to degrade during deployment. To address these challenges, we propose a structured encoder-decoder framework for adaptive residual dynamics learning in aerial manipulators. The proposed nonlinear latent encoder captures cross-variable coupling and temporal dependencies from state-input histories, while a lightweight linear latent decoder enables online adaptation under regime-dependent nonstationary dynamics. The linear-in-parameter decoder structure permits closed-form Bayesian adaptation together with consistency-driven covariance inflation, enabling rapid and stable adaptation to both transient and slowly varying dynamics changes while remaining compatible with real-time model predictive control (MPC). Experimental results on a real aerial manipulation platform demonstrate improved residual prediction accuracy, faster adaptation under changing operating conditions, and enhanced MPC-based trajectory tracking performance. These results highlight the importance of jointly modeling coupled temporal dynamics and deployment-time nonstationarity for reliable aerial manipulation.

The decline of natural pollinators has created a major challenge for crop production in controlled indoor agriculture, particularly in vertical farming environments where natural insect pollination is absent. This motivates the development of robotic systems capable of performing precise flower targeting tasks while minimizing physical interference with delicate floral structures. This paper presents an aerial manipulator platform for perception driven flower detection, localization, and approach in vertical farming environments. The proposed system integrates onboard RGBD based perception, model predictive path integral (MPPI) based unmanned aerial vehicle (UAV) control on a PX4 platform, and a lightweight 2DoF manipulator for precise end effector positioning. The platform is evaluated in both MuJoCo simulation and UAV lab experiments using a flower targeting testbed. The experimental results demonstrate stable UAV flight, reliable flower localization, and centimeter level end effector positioning accuracy. In simulation, the proposed controller achieves consistent trajectory convergence and accurate target alignment. In the real world UAV lab environment, the integrated perception control manipulation framework enables stable flower targeted positioning and end effector alignment under constrained aerial operation. These results validate the proposed aerial manipulator as a robust robotic carrier and positioning framework for future contactless pollination systems. While the current study focuses on perception guided targeting and positioning, the developed platform provides a practical foundation for integrating advanced contactless end effectors, including acoustic based pollen manipulation modules, in future work.

This work proposes a novel control and estimation approach for aerial manipulation of a cable-suspended load using Unmanned Aerial Vehicles (UAVs). Common approaches in the state of the art have practical limitations, relying on direct load measurements and Lagrangian methods for dynamic modeling. The lack of a straightforward dynamic model of the system led us to propose adopting the Udwadia-Kalaba method to explicitly incorporate the cable's geometric constraints. This formulation allowed for the consistent derivation of the tension force and its direct integration into the NMPC prediction model. Additionally, we propose a sensorless load state estimation based on the same geometric constraints. Results from real-robot experiments demonstrated that the explicit inclusion of load dynamics in the optimization problem significantly reduces trajectory-tracking errors and yields better overall performance compared to strategies based on incomplete models.

This paper presents a novel model predictive control (MPC) approach for autonomous pick-and-place between moving platforms with a hook-equipped aerial manipulator. First, for accurate and rapid modeling of the complex dynamics, a digital twin model of the quadcopter equipped with a hook-based gripper, implemented in MuJoCo, is constructed and used as the predictive model for the MPC. To handle uncertainties of the predictive model (e.g. due to aerodynamics and uncertain payloads), a robust adaptive MPC approach is proposed. By systematic integration of zero-order robust optimization (zoRO) based uncertainty propagation and an extended Kalman filter (EKF) for parameter estimation, the MPC algorithm ensures robust constraint satisfaction, high performance, and computational efficiency. The effectiveness of the proposed method is evaluated in complex simulated scenarios and in real-world flight experiments.

This paper presents an AI-enabled cascaded hybrid vision/force control framework for tendon-driven aerial continuum manipulators based on constant-strain modeling in $SE(3)$ as a coupled system. The proposed controller is designed to enable autonomous, physical interaction with a static environment while stabilizing the image feature error. The developed strategy combines the cascaded fast fixed-time sliding mode control and a radial basis function neural network to cope with the uncertainties in the image acquired by the eye-in-hand monocular camera and the measurements from the force sensing apparatus. This ensures rapid, online learning of the vision- and force-related uncertainties without requiring offline training. Furthermore, the features are extracted via a state-of-the-art graph neural network architecture employed by a visual servoing framework using line features, rather than relying on heuristic geometric line extractors, to concurrently contribute to tracking the desired normal interaction force during contact and regulating the image feature error. A comparative study benchmarks the proposed controller against established rigid-arm aerial manipulation methods, evaluating robustness across diverse scenarios and feature extraction strategies. The simulation and experimental results showcase the effectiveness of the proposed methodology under various initial conditions and demonstrate robust performance in executing manipulation tasks.

Reliable aerial grasping in cluttered environments remains challenging due to occlusions and collision risks. Existing aerial manipulation pipelines largely rely on centroid-based grasping and lack integration between the grasp pose generation models, active exploration, and language-level task specification, resulting in the absence of a complete end-to-end system. In this work, we present an integrated pipeline for reliable aerial grasping in cluttered environments. Given a scene and a language instruction, the system identifies the target object and actively explores it to gain better views of the object. During exploration, a grasp generation network predicts multiple 6-DoF grasp candidates for each view. Each candidate is evaluated using a collision-aware feasibility framework, and the overall best grasp is selected and executed using standard trajectory generation and control methods. Experiments in cluttered real-world scenarios demonstrate robust and reliable grasp execution, highlighting the effectiveness of combining active perception with feasibility-aware grasp selection for aerial manipulation.

Autonomous Aerial Manipulators (AAMs) are inherently coupled, nonlinear systems that exhibit nonstationary and multiscale residual dynamics, particularly during manipulator reconfiguration and abrupt payload variations. Conventional analytical dynamic models rely on fixed parametric structures, while static data-driven model assume stationary dynamics and degrade under configuration changes and payload variations. Moreover, existing learning architectures do not explicitly factorize cross-variable coupling and multi-scale temporal effects, conflating instantaneous inertial dynamics with long-horizon regime evolution. We propose a predictive-adaptive framework for real-time residual modeling and compensation in AAMs. The core of this framework is the Factorized Dynamics Transformer (FDT), which treats physical variables as independent tokens. This design enables explicit cross-variable attention while structurally separating short-horizon inertial dependencies from long-horizon aerodynamic effects. To address deployment-time distribution shifts, a Latent Residual Adapter (LRA) performs rapid linear adaptation in the latent space via Recursive Least Squares, preserving the offline nonlinear representation without prohibitive computational overhead. The adapted residual forecast is directly integrated into a residual-compensated adaptive controller. Real-world experiments on an aerial manipulator subjected to unseen payloads demonstrate higher prediction fidelity, accelerated disturbance attenuation, and superior closed-loop tracking precision compared to state-of-the-art learning baselines, all while maintaining strict real-time feasibility.

Precise object placement remains underexplored in aerial manipulation, where most systems rely on predefined target coordinates and focus primarily on grasping and control. Specifying exact placement poses, however, is cumbersome in real-world settings, where users naturally communicate goals through language. In this work, we present AeroPlace-Flow, a training-free framework for language-grounded aerial object placement that unifies visual foresight with explicit 3D geometric reasoning and object flow. Given RGB-D observations of the object and the placement scene, along with a natural language instruction, AeroPlace-Flow first synthesizes a task-complete goal image using image editing models. The imagined configuration is then grounded into metric 3D space through depth alignment and object-centric reasoning, enabling the inference of a collision-aware object flow that transports the grasped object to a language and contact-consistent placement configuration. The resulting motion is executed via standard trajectory tracking for an aerial manipulator. AeroPlace-Flow produces executable placement targets without requiring predefined poses or task-specific training. We validate our approach through extensive simulation and real-world experiments, demonstrating reliable language-conditioned placement across diverse aerial scenarios with an average success rate of 75% on hardware.

The rapid progress of vision--language models (VLMs) has sparked growing interest in robotic control, where natural language can express the operation goals while visual feedback links perception to action. However, directly deploying VLM-driven policies on aerial manipulators remains unsafe and unreliable since the generated actions are often inconsistent, hallucination-prone, and dynamically infeasible for flight. In this work, we present AERMANI-VLM, the first framework to adapt pretrained VLMs for aerial manipulation by separating high-level reasoning from low-level control, without any task-specific fine-tuning. Our framework encodes natural language instructions, task context, and safety constraints into a structured prompt that guides the model to generate a step-by-step reasoning trace in natural language. This reasoning output is used to select from a predefined library of discrete, flight-safe skills, ensuring interpretable and temporally consistent execution. By decoupling symbolic reasoning from physical action, AERMANI-VLM mitigates hallucinated commands and prevents unsafe behavior, enabling robust task completion. We validate the framework in both simulation and hardware on diverse multi-step pick-and-place tasks, demonstrating strong generalization to previously unseen commands, objects, and environments.