Building Energy Management

Follow this topic Ask about this topic

Momentum

5 papers in the last four weeks, up 25% on the four weeks before. 0.0% of all new papers.

Jul 13Week of Sep 28

Latest papers 28

Oct 5, 2026cs.SE

Choosing an energy-efficient software architecture for building system diagnostic support

Around 30% of global energy expenditure can be attributed to the building sector, where a large portion of energy-consumption could be avoided by repairing existing faults. Fault detection and diagnosis (FDD) software addresses this issue; however, its creation and operation also have an environmental impact. The magnitude of this impact is influenced by the diagnosis architecture, as different architectures and methods have different energy demands. Yet, simply considering the energy consumed by the software itself is not sufficient to assess its overall environmental impact, since the diagnostic performance, e.g., number of detected faults or number of faults missed, also contributes to its ecological footprint. In this paper, we propose an energy-consumption model that considers FDD performance and energy spend directly by the diagnosis software. In an initial experiment, we compare several FDD architecture families, i.e., rule-based, model-based, classical machine learning, and large-language-model-based, in simulation using performance and energy-consumption values collected from prior literature. The results show that considering the computational energy and accuracy of FDD can change the relative benefit of the different approaches. Computationally efficient machine learning methods, such as random forest, provide the largest net savings on smaller buildings, whereas more resource-intensive approaches, such as fine-tuned large language models, become advantageous as building size increases. Our findings suggest that overall energy efficiency depends not only on the computational demand of the FDD software, but also on its diagnostic performance and the scale of the building.

Roxane Koitz-Hristov, Franz Wotawa

Graz University of Technology Institute of Software Engineering and Artificial Intelligence Inffeldgasse 16b/2, A-8010 Graz, Austria

Energy-Efficient ML Building Energy Management Fault Diagnosis

Oct 1, 2026cs.AI

Questionnaire-Guided Disaggregation of Energy Appliance Use for Domestic Smart Meter Data

Ireland's smart metering programme records electricity use at 30-minute resolution, with smart meters installed in over 80% of households as of late 2025. While this is useful for billing of smart, time-of-use tariffs, it is too coarse to capture use of domestic appliances. We present a label-free disaggregation system that breaks usage data into 9 appliance categories by combining event detection for high-power loads with questionnaire-guided estimation. Our evaluation draws on four datasets: a calibration household with a commercial comparator, two public benchmarks (UK-DALE and REFIT) with per-appliance sub-metering, and a smart meter dataset of more than 4,800 years of use from 2,968 Irish consumers. Compared against two independently developed disaggregation systems our hybrid method combining analysis of usage data with questionnaire results, achieves the lowest whole-decomposition error on all buildings across the datasets, with better month-level performance over 54 paired months (

p<0.001

, Holm-corrected). Our method provides useful advice on a household's energy consumption patterns and advice on how to reduce or shift usage on some appliances in order to reduce costs.

Achal Nanjundamurthy, Rupam Misra, Suzanne Little +1

School of Computing, Dublin City University, Glasnevin, Dublin 9, Ireland

Non-Intrusive Load Monitoring Building Energy Management

Sep 23, 2026cs.LG

Uncovering Residential PV-EV Co-Adoption from Smart-Meter Data: Load Archetypes and Detection for Demand-Side Planning

The increasing adoption of electric vehicles (EVs) and rooftop photovoltaic (PV) systems is reshaping residential electricity demand and creating new challenges for demand-side management (DSM), tariff design, and low-voltage network planning. Much of the existing literature examines EV charging or PV generation in isolation, leaving the behavioral dynamics of household co-adoption less understood. We develop an integrated, two-part workflow to analyze advanced metering infrastructure (AMI) data. A discovery component applies dynamic time warping (DTW) k-means with DTW barycenter averaging to cluster daily import or export profiles into interpretable behavioral archetypes, while a predictive component trains a bidirectional long short-term memory (BiLSTM) model on 21-day windows and benchmarks it against tabular baselines for PV/EV activity detection. The EV activity labels are inferred from charging-like load signatures because charger measurements are unavailable. Using half-hourly AusNet residential data from Victoria, Australia, the clustering uncovers distinct patterns across PV-only, EV-only, co-adoption, and neither cohorts; for co-adopters, a midday-centered weekday export archetype accounts for approximately 50% of days. At validation-tuned thresholds, both BiLSTM and XGBoost achieve strong discrimination. BiLSTM obtains 0.991 for the area under the receiver operating characteristic curve (AUROC), 0.906 for macro-F1, and the highest recall on the most difficult class (0.836 for EV-only recall). Tree-based baselines remain competitive. Performance remains stable across plausible labeling rules (macro-F1: 0.894--0.914) and strictly forward temporal splits (macro-F1: 0.894--0.906).

Jack Zheng, Hao Wang

Department of Data Science and AI, Faculty of Information Technology, Monash University, Melbourne, Victoria, Australia · Monash Energy Institute, Monash University, Melbourne, Victoria, Australia

Non-Intrusive Load Monitoring Electric Vehicle Charging Building Energy Management

Sep 19, 2026cs.LG

Comparative review of hybrid forecasting models for short-term prediction of building thermal load

In this paper, a comparative review of different hybrid models for short-term forecasting of building thermal demand is carried out. Particularly, the assessment tackles the comparison of data-driven models enhanced with other state-of-the-art techniques. At the first step, the existing techniques reported in the literature are analysed. It is concluded that Metaheuristics or a data-driven model are used to identify the parameters of the basic model. The qualitative evaluation includes for each method the input and output features, main advantages and drawbacks. At the second step, an existing dataset of historical thermal demand from Scottish households, as well as historical weather forecasts are utilized to assess additionally the performance of existing hybrid methods. From the assessment of 13 hybrid methods, the Empirical Modal Decomposition - long short-term memory - Markov (EMD-LSTM-Markov) model can predict with the highest accuracy the day-ahead power pattern of heating and domestic hot water (DHW) demands. Though local power peaks are also accurately predicted, high power swells and spikes are underestimated. Other methods, such as Support Vector Machine - Simulated Annealing (SVM-SA) and Random Forest - Improved Sparrow Search Algorithm - LSTM (RF-ISSA-LSTM) predict a smooth pattern of heating and DHW demand profiles with rapid changes underestimating most power peaks.

Nikolaos A. Efkarpidis, Despoina Kothona, Georgios C. Christoforidis

VIVAVIS Schweiz AG - 5405 Baden, Switzerland · Department of Electrical and Computer Engineering, University of Western Macedonia, 50100 Kozani, Greece

Time Series Forecasting Building Energy Management

Sep 12, 2026cs.LG

LoaDiff: Conditional Generation of Electricity Consumption Time Series for Energy Analytics

The energy transition is reshaping residential electricity consumption through the increasing adoption of distributed generation, electrified appliances, and demand-response programs. Understanding these evolving behaviors requires access to granular smart-meter data for applications such as load forecasting, appliance detection, and demand-side flexibility analysis. However, such data are subject to strict access restrictions and data-protection regulations. Thus, realistic synthetic alternatives are necessary. In this paper, we introduce LoaDiff, a diffusion-based generative model for year-long, sub-hourly smart-meter load curves. LoaDiff supports flexible conditioning on static household attributes, such as appliance ownership, and dynamic contextual variables, including calendar information and outdoor temperature. We evaluate the model against multiple generative baselines on three residential electricity-consumption datasets. Our experiments assess four complementary dimensions: fidelity and diversity, training-record memorization risk, downstream utility for load forecasting and appliance detection, and conditional controllability under alternative temperature conditions. The results show that LoaDiff generates realistic and diverse load profiles, achieves a favorable trade-off between generation quality and limited evidence of memorization, preserves information useful for downstream energy applications, and responds coherently to changes in conditioning variables.

Mariia Baranova, Adrien Petralia, Etienne Le Naour +3

EDF R&D, Palaiseau, France · Université Paris Cité, F-75006 Paris, France

Synthetic Data Generation Building Energy Management Conditional Diffusion Models

Sep 11, 2026eess.SY

Very Exciting: Zero-Shot Model Predictive Control of Buildings via Excitation-Based Generalized Transfer Learning Models

The widespread adoption of data-driven, energy-efficient model predictive control (MPC) in buildings remains hindered by substantial effort to collect data and train models for individual buildings. Transfer learning (TL) has consequently gained increasing attention for target building modeling, as it reduces data requirements and modeling effort by reusing pretrained source models. However, these TL models are typically evaluated only on prediction accuracy in the target, without testing downstream control performance. To address this gap, we apply a state-of-the-art TL approach - pretraining a generalized model on multiple source buildings using standard operational data - within an MPC setup in a target building. We show that this approach is insufficient to achieve satisfactory control performance. As a solution, we introduce generalized models pretrained on excitation-based operational source data - purposefully probed inputs that explore the building's state-action space. For evaluation, we apply the generalized models via zero-shot (i.e., without fine-tuning) to 32 simulated target buildings and assess MPC performance. Our results show that excitation-based generalized models achieve the strongest control performance among all benchmarks, outperforming an online linear model-based MPC and a PI controller by 6.4% and 36.9%, respectively. By combining strong control performance with the ability to generalize across multiple buildings, without requiring any target-specific data, our approach reduces MPC setup cost and simplifies its widespread deployment in the building sector.

Fabian Raisch, Felix Koch, Zack Xuereb Conti +2

Technical University of Applied Sciences Rosenheim, Hochschulstraße 1, Rosenheim, 83024, Germany · Technical University of Munich, Arcisstraße 21, Munich, 80333, Germany · Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen, 76344, Germany +1

Building Energy Management Model Predictive Control Transfer Learning

Aug 20, 2026cs.LG

Systematic Evaluation of TabPFN-TS and Chronos-2 for Zero-Shot Heat Load Forecasting in District Heating Networks

District heating energy hubs require reliable heat load forecasts for efficient operational scheduling. Forecasting models trained on historical data may require retraining as networks evolve. Zero-shot time-series foundation models and in-context forecasting therefore offer a promising alternative: they can adapt at inference time from recent observations rather than by repeated retraining. This study systematically evaluates TabPFN-TS and Chronos-2 for probabilistic heat load forecasting in two German district heating networks and compares them with trained baselines. We assess whether TabPFN-TS, whose underlying model is pretrained entirely on synthetic tabular rather than time-series data, can capture complex district heating dynamics. We analyze covariate choice, context length, temporal resolution, and forecast horizon on selected operating weeks, evaluate the selected configuration over the full year, and assess cross-network transfer. The principal benchmark assumes perfect weather forecasts; a separate sensitivity analysis uses retrospective weather predictions. Hourly 24-hour forecasting with a 12-week rolling context and ambient temperature provides a parsimonious configuration; longer context windows do not improve accuracy. Both TSFMs outperform all trained baselines in deterministic accuracy in the full-year benchmarks. Chronos-2 achieves the best deterministic scores, with TabPFN-TS remaining close: their CVRMSE values on the main data set are 12.48% and 13.07%, respectively. Chronos-2 also achieves lower continuous ranked probability scores in both networks, with TabPFN-TS remaining close. a TSFM-based Multi-Resolution Residual-Correction Forecaster combines an hourly base forecast with short-term high-resolution corrections. Relative to direct high-resolution forecasting, it generally reduces errors in total heat demand over 12-hour periods and recorded prediction times.

Ben Spoek, Karim K. Ben Hicham, Kai Derzsi +3

Chair of Energy Efficient Buildings and Indoor Climate, RWTH Aachen University, Mathieustr. 10, 52074 Aachen, Germany · Process Systems Engineering, RWTH Aachen University, Forckenbeckstr. 51, 52074 Aachen, Germany

Zero-Shot Time Series Forecasting Time Series Forecasting Building Energy Management Time-Series Foundation Models Multiscale Time-Series Modeling Probabilistic Time Series Forecasting

Aug 13, 2026cs.LG

On the global feature importance for interpretable and trustworthy heat demand forecasting

The paper introduces the ante-hoc Explainable AI methodology to assess the global feature importance of the Machine Learning models used for heat demand forecasting in intelligent control of District Heating Systems, with motivation to facilitate their interpretability and trustworthiness, hence addressing the challenges related to adherence to communal standards, customer satisfaction and liability risks. Methodology includes use of four different approaches, namely intrinsic interpretability of Gradient Boosting method and selected post-hoc methods, namely Partial Dependence, Accumulated Local Effects and SHAP. None of the selected methods assume feature permutation or perturbations which can introduce bias due to introduction of random unrealistic values of data instances. Discussion of results is provided, including the assessment of complementarities where applicable, with specific interpretations in context of the district heating processes.

Milan Zdravković

Faculty of Mechanical Engineering University of Niš ul. Aleksandra Medvedeva 14, 18000 Niš, Serbia

Feature Attribution Interpretable ML Building Energy Management

Aug 11, 2026cs.LG

Towards an approach to multivariate outlier detection for District Heating System data

In this paper, we test different methods for multivariate detection of outliers in the data of transmitted heat energy in the selected substation of local District Heating System, by also considering outside ambient temperature, namely Z-score (univariate, as a benchmark), Mahalanobis distances, Principal Component Analysis (PCA), Isolation Forest and Hotelling's T-squared test. The overall research aims at uncovering irregular plant operation, with a wider objective of identifying the opportunities for reducing the consumption of gas in central heating plants as well as the CO2 emission. The proposed approach considers specific domain circumstances, such as irrelevance of zero transmit-ted energy timepoints as indication of off-grid plant. The outcomes of the different methods are discussed with domain experts. It was concluded that PCA, Isolation Forest and Hotelling method provide relevant results. Finally, we adopt the ensemble method (selection based on the agreement of all three methods on the detected outliers) as the final approach.

Rajko Turudija, Dušan Stojiljković, Milan Zdravković +1

Faculty of Mechanical Engineering University of Niš ul. Aleksandra Medvedeva 14, 18000 Niš, Serbia

Isolation Forest Industrial Anomaly Detection Building Energy Management Time-Series Anomaly Detection Anomaly Detection

Aug 11, 2026cs.LG

Contextual Quality-Diversity Evolutionary Reinforcement Learning for HVAC Control in Tropical Commercial Buildings

This paper proposes a contextual quality-diversity evolutionary reinforcement-learning controller, CQD-ERL, for the supervisory control of a tropical, water-cooled chiller plant and its associated air side. Rather than converging to a single scalarised policy, the controller maintains a product archive of specialised policies indexed jointly by a data- driven operating context, a cluster of daily weather and load regime, and a context-invariant behaviour descriptor, filled by a gradient-free evolutionary operator and a soft-actor-critic policy-gradient operator that share one replay buffer. Every action is filtered through a deterministic safety shield before execution. The controller is trained on a two-tier reduced-order environment representing the latent load, cooling-tower approach and humidity constraints of a Singapore commercial building, and is evaluated over a full annual backtest against an ASHRAE Guideline 36 baseline.

Tran Le Vu

Reinforcement Learning Building Energy Management Feedback Control Quality-Diversity Optimization Heating, Ventilation, and Air Conditioning Control

Aug 9, 2026cs.AI

EnergyBridge: Benchmarking Household Energy Management, User Participation, and Grid Flexibility

Residential virtual power plants (VPPs) can provide grid flexibility by shifting household demand, but physical flexibility becomes dependable capacity only when residents authorize a plan and the promised response is delivered. Existing benchmarks evaluate control but omit event-specific authorization. We present EnergyBridge, a benchmark and agent framework connecting capacity reporting, household authorization, and physical execution. It combines region-specific EnergyPlus environments for Tianjin and Berlin with an LLM-based User Participation Simulator. Against 584 persona- and event-matched human role-play judgments, the LLM-based User Participation Simulator preserves method ordering with a 5.3-point mean absolute acceptance error. Across conventional controllers and agent baselines, EnergyBridge achieves the highest simulated authorization, lowest event-window energy, and the most reliable capacity commitment in both regions. We release human data and codes for reproducible human-centered grid-flexibility research: https://github.com/Agentic-Intelligence-Lab/EnergyBridge.

Xudong Wu, Zeqing Wu, Jiarui Zhang +8

1The University of Hong Kong · 2Tianjin University · 3Beihang University

Human-in-the-Loop Evaluation Building Energy Management Demand Response User Simulation

Aug 7, 2026cs.LG

ArchEGraph: A Large-Scale Graph Dataset for Geometry-Topology-Physics Aligned Building Energy Modeling

Accurate estimation of building energy use is essential for achieving carbon neutral and sustainable buildings. To better understand the influence of design decisions on building energy use and calibrate machine learning models that can give architects and engineers rapid design feedback, large-scale datasets are needed that explicitly map building geometry to performance. We present ArchEGraph, a large-scale benchmark dataset that represents buildings as heterogeneous graphs with aligned geometry, topology, weather, and zone-level thermal loads. The dataset contains 5,481 buildings and 49,326 validated building-weather simulation cases. In total, it includes over 133,000 space nodes and 1.44 million face nodes, reflecting substantial geometric and topological complexity. Based on ArchEGraph, we define two benchmark tasks: (i) graph reconstruction from polygonal meshes, aiming to recover topological structure from geometric representations; and (ii) topology-informed load prediction, which leverages graph structure and temporal weather conditions to forecast zone-level response time series. We further introduce standardized evaluation protocols for both tasks and conduct cross-building and cross-climate generalization experiments to assess model robustness. ArchEGraph provides a unified testbed for studying geometry-topology-physics coupling in building energy modeling, enabling the development and evaluation of scalable and generalizable surrogate models.

Yihui Li, Yihui Chen, Kaidi Zha +7

Tsinghua University · UC Berkeley · 1Tsinghua University 2UC Berkeley 3MIT +4

Benchmark Construction Building Energy Management

Jul 14, 2026cs.LG

Verifier-Based Reinforcement Fine-Tuning of Reasoning Models for Thermal Energy Storage Control

Buildings are expected to shift cooling loads in response to grid conditions. Thermal energy storage (TES) enables this shift, but scheduling it well requires planning hours ahead under storage constraints. Model predictive control (MPC) and reinforcement learning are difficult to scale across buildings. This study instead adapts an open-weight reasoning model through reinforcement learning with verifiable rewards (RLVR). We convert exact offline dynamic-programming (DP) action values into dense rewards for every candidate action. Using only 30 training prompts, reinforcement fine-tuning (RFT) trains the model as an upper-level scheduler that outputs hourly heat-pump setpoints from text-based states and forecasts. Evaluation uses a deliberately simple office-building TES benchmark where exact DP is tractable and the optimum is known. RFT reduces the open-weight model's emissions from 70.5 to 61.2 kg-CO2, close to the DP optimum of 60.8 kg-CO2. GPT-5 nearly matches DP and MPC without task-specific training, while GPT-4o, a non-reasoning LLM, produces higher emissions than the no-storage baseline, so inference-time reasoning appears important. Trace analysis shows that RFT mainly stabilizes observable planning patterns (candidate comparison, look-ahead, and feasibility checking) rather than creating a new strategy. Robustness and generalization tests clarify what transfers: the reinforced planning patterns persist under forecast errors and an unseen TES condition and carry over to a battery task, but its different structure limits the gains. DP-based verifiable rewards offer a practical way to adapt open-weight reasoning models to building storage scheduling. These results motivate higher-fidelity tests of whole-building control and scalable verifiers for city-scale energy management.

Takumi Shioda, Kohei Terashima, Tatsuo Nagai

The University of Tokyo · Tokyo University of Science

RL for Language Model Reasoning Building Energy Management Reinforcement Learning with Verifiable Rewards RL Fine-Tuning

Jul 3, 2026cs.LG

Understanding electricity consumption behaviour through Inverse Reinforcement Learning

Understanding how households consume electricity in response to socioeconomic and climatic drivers is important for decision-makers designing energy policies in a changing climate and under geopolitical tensions. Consumers respond differently to thermal stress depending on income, consumption habits and the surrounding built environment, a nonlinear behaviour that most approaches oversimplify. In this study, households are treated as agents interacting with complex environments, and Inverse Reinforcement Learning is used to represent their consumption behaviour as model implied reward functions. Specifically, we observe how these reward functions change when households undergo socioeconomic and climatic shocks. The framework is tested on different clusters of electricity consumption profiles in Italy. Clusters' reward functions are retrieved and used to understand how cooling behaviour changes from summer 2021 to summer 2022 and 2023, before, during and after the energy crisis and a heatwave. We find that these shocks reshaped cooling behaviour heterogeneously across consumer groups, in directions conditioned by their prior habits and built environment. Across the 2021 to 2023 summers, we identify a spectrum of responses: transient adjustments that receded as the shocks eased, durable shifts persisting into 2023, and consumers exhibiting negligible change. At the intradaily scale, groups comparable in socioeconomic and environmental context but differing in their daily timing of consumption responded distinctly, identifying time of use as a separate dimension of behavioural heterogeneity. Energy policies and demand-response schemes should therefore account not only for who consumers are and where they live, but for when they consume and whether their response to a shock persists.

Enrico Cofler, Carlos Rodriguez-Pardo, Matteo Giuliani +2

Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Via Ponzio 34/5, 20133 Milano, Italy · RFF-CMCC European Institute on Economics and the Environment, Via Solari, 11, 20144 Milano, Italy · Centro Euro-Mediterraneo sui Cambiamenti Climatici, Via Solari, 11, 20144 Milano, Italy +2

Building Energy Management Power Systems

Jun 22, 2026cs.AI

ThermoLLM: Thermodynamics-Aware HVAC Control with Spatial-Semantic Knowledge Graph

Multi-zone HVAC control is a spatial decision problem in which indoor thermal evolution and control decisions depend not only on outdoor conditions and internal heat gains but also on zone layout, physical adjacency, and delayed thermal interactions across the building. Recent LLM-based HVAC controllers have shown that prompt-based control is feasible. However, these methods typically rely on task descriptions, observation values, short textual feedback, or unstructured retrieval, which limits their ability to reason about zone coupling, thermal response, and building dynamics. This paper presents a thermodynamics-aware LLM control framework for a five-zone EnergyPlus building simulation. The controller is grounded in a physics-informed spatial knowledge graph derived from Brick-style building semantics and linked with recent interaction history. At each control step, the model receives the current building state, graph-structured spatial context, and recent environment-controller history, enabling it to make decisions that reflect both building structure and short-term thermal evolution. We evaluate the framework against standard control baselines and several LLM-based alternatives. Results show that the proposed approach achieves the best overall energy-comfort trade-off and the lowest PMV violation while maintaining energy-efficient operation.

Kirtan Bhatt, Xiachong Lin, Matthew Amos +2

UNSW Sydney · Sydney, NSW, Australia · University of New South Wales +2

Language Model-Based Control Building Energy Management Feedback Control Heating, Ventilation, and Air Conditioning Control

Jun 14, 2026cs.NI

Hidden Degradation Costs in Energy-Cost-Only HEMS Optimisation: Study on Battery and PV Sensitivity

Residential battery energy storage systems (BESS) are increasingly deployed alongside photovoltaic (PV) generation to reduce household energy costs under volatile time-of-use (TOU) tariffs. Model predictive control (MPC) is a widely adopted optimisation strategy for home energy management systems (HEMS), typically formulated to minimise net energy cost, subject to physical and operational constraints. However, battery degradation is rarely embedded in the optimisation objective, meaning its cost is unquantified and aggressive; high-cycle-count strategies could incur significant losses once deployed to physical systems. This paper presents a receding-horizon mixed-integer linear programming (MILP) baseline for a UK residential HEMS, using demand data from the REFIT dataset. A 3 by 3 sensitivity study is conducted across three battery sizes and three PV array sizes, with post-hoc degradation cost estimated using the Naumann stress model and rainflow cycle counting. Results show that degradation remains constant for each battery size and can exceed energy cost savings by up to 1,060 %. These results demonstrate that energy-cost-only optimisation systematically underestimates the true system cost, motivating a degradation-aware control formulation.

Dawood Butt, Nandor Verba

WMG, The University of Warwick, Coventry, United Kingdom

Building Energy Management

Jun 8, 2026quant-ph

Who Earns the Safety? Intervention-Aware Quantum Predictive Control with Safety Attribution

Hard safety filters are increasingly placed downstream of learned controllers to guarantee constraint satisfaction at run time. Yet a filtered controller that never violates a constraint may still have learned nothing about safety: the filter can silently repair an incompetent upstream policy, so that post-filter success measures the filter, not the policy. We argue that safe policy learning should ask who earns the safety - the policy or its protective layers - and we make this question measurable. We introduce Intervention-Aware Variational Quantum Differentiable Predictive Control (IA-VQC-DPC), which (i) trains a compact variational quantum circuit (VQC) policy under a primal-dual intervention budget that penalizes reliance on a differentiable Control-Barrier-Function (CBF) projection, and (ii) is evaluated with a safety-attribution protocol that decomposes the executed-trajectory correction into a CBF term and a deployment runtime-guard term, and stress-tests the policy with guard-off evaluation. On closed-loop, high-fidelity BOPTEST building-control emulators (5 seeds, 60 episodes per method), intervention-aware training significantly lowers the quantum policy's raw pre-filter violation and total safety-layer reliance (both p < 10^-4) with no significant energy regression; at an equal approximately 400-parameter budget the quantum policy is significantly safer and more comfortable than a matched classical policy. Guard-off evaluation confirms the improvement is policy-level and exposes a valuable negative result: a learned differentiable energy head is only safe when paired with a distribution-aware runtime guard. The attribution protocol is general beyond quantum policies and buildings.

Yifan Wang

Department of Mechanical Engineering, McGill University Montréal, QC H3A 2T7, Canada

Safety-Critical Control Control Barrier Functions Building Energy Management Safety Filtering Model Predictive Control Variational Quantum Circuits

Jun 1, 2026cs.LG

RESCAST-100K: A Comprehensive Dataset for Cross-Domain Residential Load and Indoor Temperature Forecasting

Accurate short-term forecasting of residential energy load and indoor temperature is essential for home energy management systems, grid-level demand response, and community energy efficiency efforts. Domain adaptation and transfer learning have shown promise for improving forecasting accuracy under data heterogeneity and scarcity commonly seen in residential settings. However, progress is limited by the lack of comprehensive residential datasets: existing benchmarks are narrow in target coverage and rarely support structured cross-domain evaluation. We introduce RESCAST-100K, a large-scale residential forecasting benchmark for studying cross-domain generalization. It provides a configuration-driven interface that instantiates source and target domains along interpretable axes, including geography, climate zone, wall construction, and heating equipment, enabling systematic evaluation of transfer learning, domain adaptation, and zero-shot generalization under controlled domain shifts. The benchmark covers approximately 100,000 EnergyPlus-simulated U.S. homes derived from ResStock, with 15-minute time series for three coupled targets per home: total load, HVAC load, and indoor temperature. These are paired with weather channels, HVAC setpoints, and over 40 static building covariates. RESCAST-100K also integrates five real-world residential datasets under a unified schema, supporting sim-to-real evaluation on the same tasks. We benchmark recurrent, attention-based, and MLP-mixer architectures for zero-shot performance across domains, missing-input conditions, and forecasting tasks. Cross-attention and MLP-mixer models consistently outperform recurrent and classical transformer baselines under domain shift. RESCAST-100K is intended to aid the machine learning and building analytics communities advance cross-domain residential forecasting at home, community, and grid scale.

Jainam Dhruva, Yousaf Raza, A. B. Siddique +1

Department of Computer Science University of Kentucky Lexington, KY 40506

Multivariate Time Series Forecasting Synthetic-to-Real Domain Adaptation Time Series Forecasting Forecasting Benchmarks Building Energy Management Cross-Domain Generalization+1

Jun 1, 2026cs.AI

Explainable Data-driven Deep Reinforcement Learning Methods for Optimal Energy Management in Buildings

The increasing integration of renewable energy sources into power systems, particularly in buildings equipped with photovoltaic (PV) panels and energy storage systems, introduces significant complexity in energy systems. Volatile power generation, varying electricity tariffs, and increased entities, e.g., PV systems, and heat pumps, have increased the complexity and made the system harder to operate. This leads to the demand for additional control and optimization routes including data-based controls, such as reinforcement learning. While deep reinforcement learning (DRL) has emerged as a promising solution to optimize building operations in dynamic and ever more complex environments, its black-box nature impedes user trust and practical adoption. This paper presents a framework for explainable deep reinforcement learning (XRL) applied to energy management in residential buildings. We demonstrate its usage on both synthetic data but also on real-world data from the Living Lab Energy Campus (LLEC) at KIT. We train and compare both on-policy and off-policy DRL agents on an expanded state space that incorporates real-time measurements (demand, PV generation, battery power, state of charge), external signals (dynamic electricity price, local weather data), calendrical and holiday indicators, and forecasts for demand and price. Our experimental results indicate that on-policy algorithms, particularly Advantage Actor Critic (A2C) and Proximal Policy Optimization (PPO), outperform off-policy methods in terms of cumulative rewards and policy stability. To explain these models, we employ post-hoc interpretation techniques to elaborate the learned control policies. Our findings demonstrate that the XRL framework not only reduces electricity costs through optimal battery management, but also provides transparent, actionable insights into the agent's decision-making process.

Hallah Shahid Butt, Qiong Huang, Gökhan Demirel +6

Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Germany

RL Control Reinforcement Learning Building Energy Management Interpretability in RL Power Systems

Jun 1, 2026cs.LG

Quantifying the Energy Floor: Direct Measurement and Replay Buffer Bias in SAC-Based HVAC Control on sbsim

We quantify the energy floor -- the minimum achievable cost given action space constraints -- for Soft Actor-Critic (SAC) HVAC control on the sbsim calibrated building simulator. Through minimum-action experiments, we directly measure this floor at USD 35.51/day, dominated by continuous electrical loads (USD 35.44, 99.8%) with negligible gas consumption. The standard SAC baseline, initialized with schedule-policy replay buffer transitions, converges to USD 37.18/day, 4.7% above the floor. We identify buffer initialization as the dominant source of sub-optimality in this scenario: training from an empty buffer reduces cost to USD 35.57/day, eliminating 96% of the gap. Expanding the supply water temperature range by 10 K yields negligible additional savings (USD 0.03/day), and further expansion triggers physical constraint violations. We additionally uncover a discount factor coupling (gamma_eff = 0.891) shrinking the effective planning horizon from 8.3 h to 46 min -- a benchmark-wide issue warranting audit. Systematic ablation across planning horizon, reward weights, and observation enrichment confirms all pre-filled-buffer configurations cluster within 0.7% (USD 37.18--USD 37.42), demonstrating that equipment minimum power -- not algorithmic design -- imposes the binding constraint.

Bo Li, Chen Zhang

Shanghai Jiao Tong University College of Smart Energy Shanghai, China

Experience Replay Building Energy Management Feedback Control Soft Actor-Critic Heating, Ventilation, and Air Conditioning Control

May 31, 2026cs.AI

Application of Algorithms in Energy-Efficient Design Platforms for Green Building

During green building design, computer-aided energy assessment is widely used to improve efficiency and achieve overall optimization. This paper presents a platform that combines Building Information Modeling (BIM), sensor operational data, and advanced simulation workflows using robust algorithms. The platform uses a multi-layer service architecture with dynamic energy simulation and evolutionary multi-objective optimization, connected via a high-performance C++ core and adaptive agent models. A mid-rise office building was selected as the case study. Five representative areas were chosen to collect data on building envelope characteristics and occupancy patterns. After preprocessing, missing sensor data accounted for 3.2% of annual records, and all variables were standardized using 15-minute interpolation. After 40 optimization rounds, annual energy consumption per square meter dropped by 29.3% from 315 kWh/m2 to 223 kWh/m2. The lifecycle cost increase for occupants was limited to 3.7%, and discomfort hours were reduced to under 70 hours per year. Analysis of Pareto optimal solutions shows that the envelope U-value ranges from 1.05 to 1.57 W/m2K, and nighttime ventilation rate ranges from 2.1 to 3.6 h-1, both closely linked to energy performance. The results confirm that the integrated algorithm framework offers good scalability, strong performance, and technical feasibility for green building design. This platform provides a reliable decision-support tool for design engineers and sustainability practitioners, enabling accurate, data-driven delivery of energy-efficient buildings.

Na Yu, Fu Wenli, Guo Fei

First Highway Engineering Co., Ltd. Chengdu, Sichuan Province, 610000, China

Building Energy Management

May 28, 2026cs.AI

Uncertainty-Aware Transfer Learning for Cross-Building Energy Forecasting: Toward Robust and Scalable District-Level Energy Management

Scaling data-driven energy forecasting to district level requires models that can be re-used across buildings with minimal target-domain data and honest uncertainty estimates. We present an uncertainty-aware transfer learning (TL) framework for cross-building energy forecasting based on the Temporal Fusion Transformer (TFT), evaluated on a newly released high-resolution real sub-meter dataset: an educational building at Aalborg University, Denmark (source) and the multi-typology NEST building at EMPA, Switzerland (target). We introduce the Transfer Robustness Index (TRI), an architecture-agnostic metric for quantifying generalization quality across domain gaps. A four-strategy layer-freezing ablation shows that Probe-Only fine-tuning, updating only 455 output-layer parameters out of 806K, achieves the best transfer quality (TRI = 3,097), outperforming full fine-tuning and suggesting that TFT encoders learn transferable temporal representations. Monte Carlo Dropout yields a prediction interval coverage probability of 93.2%, close to the nominal 95% target. A data-scarcity analysis further shows monotonic improvement with increasing target-domain data, providing practical guidance for district energy deployment.

Shadmehr Zaregarizi, Khashayar Yavari

Politecnico di Torino · Turin, Italy

Uncertainty Quantification Time Series Forecasting Building Energy Management Cross-Domain Transfer Learning Time Series Transformers Probabilistic Time Series Forecasting

May 27, 2026cs.AI

PIRS: Physics-Informed Reward Shaping for SAC-Based Building Energy Management

Occupant comfort and grid-aware energy efficiency are competing objectives whose joint optimization depends critically on how reward functions are specified in deep reinforcement learning (DRL) controllers for buildings. Yet reward design remains largely ad hoc: comfort terms are either hand-tuned heuristics or simple temperature-deviation proxies without explicit grounding in thermal-comfort physics. We present PIRS (Physics-Informed Reward Shaping), which replaces these ad-hoc comfort proxies with the ISO 7730 Predicted Mean Vote (PMV) formulation inside a weighted multi-objective reward for Soft Actor-Critic (SAC). By anchoring the comfort signal in the ISO 7730 PMV formulation, PIRS improves reward interpretability and provides a standards-grounded comfort proxy without changing any other component of the learning pipeline. We evaluate PIRS in CityLearn v2.1.2 (challenge 2022 phase 1) with a central SAC agent trained for 50k steps over five random seeds, and compare against a rule-based controller (RBC), a manually engineered reward (E2), an energy-only reward (E3), and a naive temperature-deviation comfort reward (E4). District-level key performance indicators (KPIs), reported as ratios versus RBC, show that PIRS attains cost, carbon, and electricity metrics on par with the manual baseline while substantially outperforming non-physics-grounded designs -- particularly on load ramping (1.78x vs. ~2.4x RBC) and daily peak demand. All DRL policies remain above RBC at this training budget; we interpret this gap honestly and position PIRS as an interpretable, standards-aligned foundation for reward design rather than a claim of dominance over classical control at limited compute.

Shadmehr Zaregarizi, Khashayar Yavari

Politecnico di Torino Turin, Italy

Multi-Objective Reinforcement Learning Reward Shaping Building Energy Management Heating, Ventilation, and Air Conditioning Control

May 27, 2026cs.AI

OccuReward: LLM-Guided Occupant-Centric Reward Shaping for Demographic Equity in Grid-Interactive Buildings

Large language models (LLMs) have demonstrated promising capability in generating reward functions for deep reinforcement learning (DRL)-based building energy management. However, their potential to exhibit or exacerbate disparities in occupant comfort across heterogeneous demographic populations remains unexplored. We present OccuReward, a framework investigating how LLM-mediated reward design affects demographic equity. Our contribution is three-fold: the introduction of the Comfort Equity Index (CEI) as a novel feedback signal; a methodology for iterative, equity-aware LLM reward shaping; and a performance analysis of DRL agents under these refined objectives. Utilizing four empirically grounded occupant profiles from the ASHRAE Global Thermal Comfort Database II (13,440 votes), we deploy a Soft Actor-Critic agent in CityLearn v2. Our approach employs the Gemini API to generate reward function logic and weights--rather than performing per-step inference--across three refinement rounds. Results across 15 experimental runs reveal that elderly female occupants consistently experience the lowest satisfaction in initial rounds. By Round 3, equity-aware LLM refinement activates specific reward components that improve satisfaction for Young Males (+17.6%), Mid-aged Females (+28.2%), Health Sensitive (+53.8%), and Elderly Females (+567%), while simultaneously reducing energy costs by 3.2%. Our findings highlight that while reward-level intervention significantly improves equity, demographic disparities in AI-driven controllers persist, necessitating further research into algorithmic fairness in building systems.

Shadmehr Zaregarizi, Khashayar Yavari

Politecnico di Torino Turin, Italy

Reward Shaping Algorithmic Fairness LLM-Guided RL Building Energy Management Demographic Bias in Language Models

May 23, 2026cs.LG

A Unified Python Framework for Direct PPO-based Control of AHUs with Economizer Logic and CO2-Constrained Ventilation

Optimizing HVAC (Heating, Ventilation and Air Conditioning) can enhance a building's energy efficiency while providing comfort levels for its occupants. Using conventional control systems to maintain HVAC functions is often difficult because of the nonlinear characteristics of a building envelope as it experiences stochastic load variations over time. This paper presents a new approach to optimizing HVAC systems through the use of Deep Reinforcement Learning (DRL) algorithms and the Proximal Policy Optimization (PPO) algorithm implemented in a custom Python performance environment. The DRL system uses a second order resistor-capacitor thermal model and an integrated dynamic mass balance of CO2 to replicate the complex physics associated with buildings. One major innovation of this study is a "Hierarchical Flow Logic," which provides the means to ensure that indoor air quality (IAQ) is maintained by overriding the accepted actions of the agent that cause CO2 to exceed 1000 ppm. In addition, an enthalpy-based economiser is used to create free cooling from the outdoor environment. The experimental data shows that compared to PID controllers tuned by GA or traditional On-Off controls, a PPO agent has better temperature stability and energy efficiency overall. An end-to-end pipeline provides an avenue for robust and generalized solutions to help implement smart building energy management within the context of real hardware implementation.

Erfan Haghighat Damavandi, Davide Papurello, Mahdi Alibeigi +3

a Research and Development Department Owtana Tech- Turin, Italy · b Department of Energy Politecnico di Torino- Turin, Italy · c Department of Energy University of Tehran- Tehran, Iran +1

RL Control Constrained RL Building Energy Management Feedback Control Heating, Ventilation, and Air Conditioning Control

May 6, 2026cs.LG

Counter-Dyna: Data-Efficient RL-Based HVAC Control using Counterfactual Building Models

Model-based reinforcement learning (MBRL) offers a promising approach for data-efficient energy management in buildings, combining the strengths of predictive modeling and reinforcement learning. While previous MBRL methods applied to HVAC control have reduced training data requirements, they still require several months of interaction with the building to learn a satisfactory control policy. A key reason is that existing surrogate models attempt to predict the entire state-space, including weather and electricity prices that are unaffected by control actions, or completely ignore these variables. Addressing these issues, we propose Counter-Dyna, a method that enhances the data-efficiency of Dyna, an MBRL method. We create data-efficient counterfactual surrogate models (CSM) by leveraging invariances in the state-space. Using a CSM in Dyna speeds up RL training measured in environment interaction data compared to previous results. In comparison with previous state-of-the-art that used 6-12 months of environment interactions, our method needs only 5 weeks. We evaluate our method in a large simulation study using the literature standard BOPTEST framework and proximal policy algorithm (PPO) as the RL algorithm. Our results show cost-saving potentials of 5.3% to 17.0% in a hypothetical deployment scenario. Our work is a significant step towards making real-world deployment of RL algorithms in HVAC control practically viable.

Jan Marco Ruiz de Vargas, Fabian Raisch, Zoltan Nagy +2

Technical University of Munich Munich, Germany · Technical University of Applied Sciences Rosenheim Rosenheim, Germany · Eindhoven University of Technology Eindhoven, Netherlands +1

Neural Surrogate Modeling Building Energy Management Feedback Control Sample-Efficient RL Model-Based RL Heating, Ventilation, and Air Conditioning Control

Apr 17, 2026eess.SY

Safe Deep Reinforcement Learning for Building Heating Control and Demand-side Flexibility

Buildings account for approximately 40% of global energy consumption, and with the growing share of intermittent renewable energy sources, enabling demand-side flexibility, particularly in heating, ventilation and air conditioning systems, is essential for grid stability and energy efficiency. This paper presents a safe deep reinforcement learning-based control framework to optimize building space heating while enabling demand-side flexibility provision for power system operators. A deep deterministic policy gradient algorithm is used as the core deep reinforcement learning method, enabling the controller to learn an optimal heating strategy through interaction with the building thermal model while maintaining occupant comfort, minimizing energy cost, and providing flexibility. To address safety concerns with reinforcement learning, particularly regarding compliance with flexibility requests, we propose a real-time adaptive safety-filter to ensure that the system operates within predefined constraints during demand-side flexibility provision. The proposed real-time adaptive safety filter guarantees full compliance with flexibility requests from system operators and improves energy and cost efficiency -- achieving up to 50% savings compared to a rule-based controller -- while outperforming a standalone deep reinforcement learning-based controller in energy and cost metrics, with only a slight increase in comfort temperature violations.

Colin Jüni, Mina Montazeri, Yi Guo +3

Urban Energy Systems Laboratory, Swiss Federal Laboratories for Materials Science and Technology, Dubendorf, Switzerland. · School of Automation, Beijing Institute of Technology, Haidian District, Beijing, China · Reliability and Risk Engineering Laboratory, ETH Zürich, CH-8092, Switzerland.

RL Control Building Energy Management Demand Response Feedback Control Safe RL Heating, Ventilation, and Air Conditioning Control

Sep 29, 2024cs.LG

Constrained Reinforcement Learning for Safe Heat Pump Control

Constrained Reinforcement Learning (RL) has emerged as a significant research area within RL, where integrating constraints with rewards is crucial for enhancing safety and performance across diverse control tasks. In the context of heating systems in the buildings, optimizing the energy efficiency while maintaining the residents' thermal comfort can be intuitively formulated as a constrained optimization problem. However, to solve it with RL may require large amount of data. Therefore, an accurate and versatile simulator is favored. In this paper, we propose a novel building simulator I4B which provides interfaces for different usages and apply a model-free constrained RL algorithm named constrained Soft Actor-Critic with Linear Smoothed Log Barrier function (CSAC-LB) to the heating optimization problem. Benchmarking against baseline algorithms demonstrates CSAC-LB's efficiency in data exploration, constraint satisfaction and performance.

Baohe Zhang, Lilli Frison, Thomas Brox +1

Faculty of Computer Science, University of Freiburg, Germany · Systems Control and Optimization Laboratory, Department of Microsystems Engineering, University of Freiburg, Germany

RL Control Constrained RL Building Energy Management Soft Actor-Critic Safe RL Heating, Ventilation, and Air Conditioning Control