Edge

Adaptive security at the network edge increasingly relies on automated planners, including rule-based controllers, learned policies, and LLM-assisted agents, that translate observations into enforcement actions. Once such a planner can influence live policy state, syntactic validity is not enough. A semantically wrong action, produced from incomplete or manipulated observations, can be faithfully executed by an enforcement substrate that cannot judge mission context. We address this problem by treating the boundary between planner output and kernel enforcement input as the primary security object. We propose a split-control architecture in which an untrusted planner emits typed security intents, a deterministic governor checks each intent against safety, resource, temporal-stability, and proportionality invariants, and only admitted actions are bound to signed receipts and compiled into pre-installed eBPF map updates. The paper formalizes this trust-boundary problem, defines three threat classes, develops the governor admission predicate, and reports an end-to-end prototype. Across rule-based and LLM-assisted planners on a Raspberry Pi 5 testbed connected to the university 5G Test Network, the governor admits, rejects, and bounds intents at microsecond cost without disrupting protected-flow regularity. The contribution is conceptual as much as empirical: adaptive security does not need to trust the author of an action. It needs a mediation boundary that decides whether the action is admissible.

High-capacity associative memories based on Kernel Logistic Regression (KLR) exhibit exceptional storage capabilities and robustness. Previous empirical studies identified a hyperparameter regime, the "Ridge of Optimization," where attractor stability is maximized. However, the geometric nature of this regime and the optimization dynamics required to reach it have remained unclear. In this paper, we investigate the static geometry of the parameter space and the learning trajectory of Gradient Descent (GD) in KLR-trained Hopfield networks. Using the eigenvalue spectrum of the Hessian, we reveal that the Ridge corresponds to a phase boundary located adjacent to a rank-1 spectral collapse, acting as a geometric singularity where the principal curvature is massively amplified. Furthermore, we demonstrate that the learning dynamics exhibit a transient self-stabilizing behavior driven by the Edge of Stability (EoS) phenomenon. Rather than seeking flat regions, the network parameters are driven toward a state where the local curvature dynamically equilibrates near the stability limit dictated by the learning rate, allowing the optimization to survive the initial instability. We provide analytical derivations for both the rank-1 asymptotic collapse and the dynamic feedback loop governing this equilibration. These findings suggest that optimal, high-capacity memory representations are not formed in flat minima, but are dynamically sculpted at the highly curved boundaries of geometric singularities.

Convolutional Neural Networks (CNNs) are increasingly deployed in safety-critical edge applications, where soft errors can silently corrupt inference outputs and lead to unsafe decisions. Such applications typically rely on resource-constrained embedded GPUs, requiring fault detection and mitigation techniques that add minimal compute, memory, and latency overhead while integrating seamlessly with the standard GPU inference pipeline. Existing algorithm-based fault tolerance techniques rely on matrix augmentation and per-operation checksum verification, imposing substantial overhead that is prohibitive for CNN inference on embedded GPUs. In this work, we propose carry-through checksum, a fundamentally new scheme for soft-error detection in CNN inference on embedded GPUs. The method embeds dedicated carry-through filters into the convolutional layers, which compute a checksum from the CNN's own operations and propagate it through inference, enabling end-to-end error detection with a single output verification. Experimental results on multiple CNN architectures show that the proposed method detects 95.86% and 86.56% of critical faults for FP32 and FP16, respectively, at almost no additional per-image overhead. Detected faults are mitigated through re-execution, incurring only 2.27% run-time overhead across the entire test set on an NVIDIA Jetson Orin NX GPU.

Large-scale vision-language models (VLM) such as CLIP enable strong open-vocabulary reasoning, yet deploying these capabilities on resource-constrained edge devices remains challenging. EdgeVL addresses this problem by distilling CLIP representations into lightweight multi-modal encoders and applying quantization-aware training (QAT) for efficient Open-Vocabulary Classification (OVC) on edge hardware. However, its two-stage optimization applies different objectives for distillation and QAT, and contrastive learning is performed within the quantized student space, which can result in inconsistent optimization and reduced training efficiency. Moreover, identical supervision across RGB and non-RGB modalities may lead to modality imbalance. We propose a unified framework for quantized semantic distillation tailored to edge deployment. By jointly optimizing distillation and quantization within a unified teacher-anchored framework, our method ensures consistent training under quantization, suppressing hard negatives and enlarging decision margins. Additionally, we design a lightweight cross-attention adapter that enhances non-RGB representations through RGB-guided semantic transfer, narrowing the modality gap. Extensive experiments demonstrate consistent improvements on non-RGB modalities while maintaining deployment efficiency.

Dynamic-vision-sensor (DVS) cameras generate events on a per-pixel basis with a $μ$s-level temporal resolution, calling for new algorithm-hardware co-design approaches compared to standard frame-based vision. While event-driven graph neural networks (EV-GNNs) emerge as a promising algorithmic solution, they raise new HW challenges by mixing dense-regular compute operations and sparse-irregular memory accesses. We present ETHEREAL, the first EV-GNN accelerator that scales to 640$\times$480 resolutions, thanks to a neighbor-parallel spline convolution engine and a 2D/3D-split memory hierarchy with a novel region-of-interest spatiotemporal caching mechanism. Measurement results demonstrate end-to-end inference with 25.6$μ$s latency and 1.7$μ$J energy per event on state-of-the-art workloads

Traditional TinyML systems for edge devices achieve high accuracy by relying on fixed-depth models that require a constant number of multiply-accumulate (MAC) operations regardless of the input complexity. This approach wastes critical resources in battery-powered Internet-of-Things (IoT) devices and limits the real-time performance of edge cyber-physical systems. Multi-exit execution schemes mitigate these issues and are widely used on high-end devices such as GPUs, but are rarely exploited on edge IoT devices because they require substantial rethinking given their strict memory and computational constraints. We address these aspects by designing and deploying, on an ultra-low-power GWT GAP9 System-on-Chip (SoC), a novel multi-exit computational scheme, demonstrating it on a MobileNetV2 convolutional neural network (CNN) for the ImageNet-100 classification task. Our approach introduces multiple exits at different CNN depths, each with a confidence-based gating mechanism that dynamically and autonomously decides whether to continue or stop inference. Comparing our multi-exit strategy to the standard MobileNetV2 on a GAP9 SoC, we show a 41% reduction in the average computational cost (from 313 MMAC to 185 MMAC), a 29% lower inference time (from 49 to 35 ms), and an energy saving of 24% (from 2.1 to 1.6 mJ per frame). All these improvements come with a ~1% loss in accuracy compared to the full-depth MobileNetV2, which achieves 80.5%. Finally, comparing our adaptable multi-exit scheme with a third-party state-of-the-art adaptive CNN, also deployed on the GAP9, we achieve more than 2x its computational efficiency, increasing it from 8.1 to 17.2 MAC/cycle.

Long-video understanding on edge devices must reason over hours of content under tight compute and bandwidth budgets. Subsampling visual tokens loses temporal structure, while text-only video memories lose fine-grained visual attributes. We observe a visual-textual duality: language memories carry long-range temporal structure better than dense frames, while pixels remain decisive for attribute-level perception. Building on this insight, we propose Caption-once, Frames-onDemand (CFD), a budget-aware edge-cloud agentic framework. The edge runs a single offline captioning pass that builds a dual-track narrative index, an event-level story skeleton plus a clip-level micro-log, cached and reused across queries without re-captioning. At query time, a cloud-side MLLM reasons over the index in a story-first loop centered on a lightweight Visual-Need Router: a per-query gating module that triggers bounded keyframe retrieval only for perceptual questions (appearance, on-screen text, attribute disambiguation) and keeps temporal-structural questions in language space. The router turns visual access into a first-class, query-conditioned cost, capping per-query frame consumption regardless of video length. Experiments on long-video benchmarks demonstrate strong accuracy-efficiency trade-offs while substantially reducing online visual processing.

Recent advances in multimodal large language mod- els (MLLMs) have opened new opportunities for edge intelligence by enabling reasoning across heterogeneous sensor modalities, such as vision, text, and telemetry data. However, deploying these capabilities on resource-constrained edge platforms remains challenging due to the substantial computational, memory, and communication demands of modern MLLMs. Rather than transmitting raw sensor observations or partitioning neural networks at intermediate layers, Edge Multi-Modal Intelligence (EMMI) communicates a compact representation between edge devices and server resources, enabling communication-efficient edge MLLM inference. To achieve this, EMMI performs modality-specific encoding, cross-modal representation fusion, and learned compression at the edge, transmitting only a compact latent representation to server-side resources for high-capacity MLLM reasoning. This representation-centric design reduces communication overhead, preserves local data privacy, and provides a fixed-size interface between heterogeneous edge devices and server-side MLLMs. Evaluation on a representative multimodal benchmark demonstrates that EMMI can reduce the communication payload by 32x while maintaining comparable downstream accuracy, resulting in up to a 3.4x reduction in estimated end-to-end inference latency under bandwidth-constrained edge conditions.

Graph captions should help readers understand graph structure, rather than simply translate adjacency matrices into long textual edge lists. A useful graph caption abstracts connectivity into recognizable motifs, such as hubs, paths, cycles, cliques, and bridges, because these motifs provide compact structural units that are easier to read, compare, and recover. In this paper, we study motif-oriented graph captioning as a bidirectional graph-text translation task, where captions must both preserve enough topology for graph recovery and express the graph through concise motif-level descriptions. We show that direct prompting of GPT-5.1 often produces graph-recoverable captions by enumerating node-to-node connections, but these captions are verbose and can contain inconsistent motif interpretations. To address this gap, we introduce Structurally Speaking, a lightweight structured prompting protocol that guides translation between explicit connectivity and motif-level abstraction. Experiments on a synthetic motif-based dataset show that structured prompting produces shorter and more motif-consistent captions while maintaining comparable graph recovery. These results suggest that explicit topology-to-motif reasoning guidance can make LLM-generated graph captions more interpretable without model fine-tuning.

Audio-video diffusion models rely on cross-modal attention to coordinate text, sound, and visual content, yet this same mechanism can introduce subtle and systematic semantic leakage. We study these models by probing and analyzing the ``attention triangle,'' comprising the three cross-attention edges connecting the text, audio, and video streams, and examine how semantic information is routed across modalities during generation. Our analysis reveals that routing along the audio-video edge is bidirectional: audio can influence video generation, while video can influence audio generation. This edge is shaped by biases encoded in the model's parameters and emerges as a major contributor to leakage: when prompts are in tension with learned priors, cross-modal interactions may override the intended conditioning and reroute semantics toward visually canonical but incorrect outcomes. These effects suggest that semantic artifacts arise not merely from attention spreading beyond its intended target, but from structured, bias-driven interactions along specific pathways. Building on this perspective, we extract attention-derived signals that expose how semantics are distributed and grounded across modalities, and use them as a diagnostic tool to both analyze and deliberately incur leakage under controlled conditions. This enables us to probe the internal dynamics of cross-modal routing and isolate the role of individual interactions. We further leverage these signals to guide inference-time interventions that encourage more consistent cross-modal alignment. Extensive experiments support our analysis and demonstrate improved semantic grounding while preserving generation quality.

Analog in-memory computing (AIMC) speeds up neural-network inference by doing the arithmetic directly inside a memory array, instead of shuttling weights back and forth between memory and a processor. This saves energy, but the physical devices that store the weights are imperfect: programming errors, electrical noise, limited-resolution converters, and outright broken cells all distort the computation, and every physical chip is distorted in its own way. A designer with several such chips available faces an uncomfortable choice: run all of them and combine the answers (safe, but wasteful of energy), or trust a single chip blindly (cheap, but with no guarantee on how often it is wrong). This paper introduces RACE-AIMC (Risk-Aware Certified Ensemble for AIMC), a framework that resolves this choice with statistics rather than guesswork. Offline, RACE-AIMC studies a pool of physical accelerators, picks the single best one for a given energy budget, and computes a mathematically exact upper bound on how often that accelerator will be wrong when it chooses to answer. Online, only that one accelerator is switched on; a lightweight check decides whether to accept its answer or defer to a fallback. In our simulations using a noisy weight mapping and multiple independent test runs, every certified bound stayed under a 10% error target (mean bound 7.83% +- 0.89%, with 70.88% +- 0.98% of inputs answered directly). The resulting system matches the accuracy of a clean digital baseline while cutting modeled energy use by 69.02% relative to always running every accelerator in the pool.

Edge vision models are difficult to deploy on resource-constrained hardware, making low-bit post-training quantization (PTQ) attractive. In practice, standard FP32 training often produces heavy-tailed activation distributions whose outliers destabilize activation quantization: preserving the full range wastes quantization bins on rare extremes, while aggressive clipping causes information loss. Existing solutions typically rely on quantization-aware training (QAT), which adds training complexity and bit-width coupling, or advanced PTQ procedures that repair the model after training. We present SCULPT (Statistical Clipping and Uniform Loss for Post-Training), a training-time method that improves PTQ readiness during ordinary FP32 fine-tuning. SCULPT combines a topology-aware activation regularizer that suppresses quantization-hostile skewness and kurtosis with a stable percentile-based clipping mechanism that learns deployment-ready activation bounds. Unlike QAT, SCULPT does not simulate quantization during optimization; unlike post hoc outlier-repair PTQ methods, it does not require runtime activation transformations. The learned clipping bounds can be exported directly into a standard PTQ workflow for low-bit deployment, including INT8 and lower-bit settings such as W4A8.

Large language model (LLM) agent failures often contain multiple related errors rather than a single mistake. Existing attribution methods usually identify a responsible agent, step, or root cause, but do not explicitly model dependency between errors. We introduce EDGE, an Error Dependency Graph-guided multi-Error attribution framework. EDGE constructs an error dependency graph from observed error events and validates a reliable causal subset through counterfactual rollout. The inference graph guides a two-stage LLM-as-judge detector for error attribution, and the intervention-validated subgraph provides a more reliable basis for explanation and repair analysis. Experiments on TRAIL and MAST show that EDGE improves category-level multi-error attribution across most evaluated models and settings. Experiments with adapted Who&When-style prompts show that the graph helps across prompting strategies. These results suggest that dependency structure is a useful diagnostic prior for agent failures beyond isolated root-cause prediction.

As agentic systems evolve into complex multi agent orchestration workflows, there is a growing and critical need for systematic frameworks that measures an agent's behavioral consistency and determinism. In this paper, we introduce a formal evaluation methodology that is grounded in AgentGraph, a planner powered by a domain specific language that represents agent reasoning through a dynamically adjustable directed graph. We leverage this structural formalism and utilize graph traversal algorithms that exhaustively enumerate conversational paths, forming a comprehensive evaluation set that captures the agent's complete behavioral space. We then systematically replay these reproducible trajectories to compare observed outputs and state transitions against the intended DSL specification. To quantify reliability, we define novel metrics that measure response and trajectory determinism, structural adherence and semantic consistency across both exact replays and their linguistic variants. Our system's results demonstrate that agents configured using frameworks like AgentGraph and LangGraph with explicitly structured node transitions show superior determinism over agents that are not configured with controlled transitions.

Large Language Models (LLMs) have achieved remarkable success in natural language understanding and generation, but their deployment is constrained by high computational demands. Deploying smaller LLMs directly on the edge can circumvent this, but with degraded accuracy. Deploying smaller cloud-based big LLMs preserves performance, but at the cost of expensive per-token computation. We present a distributed inference framework, \our{}, that integrates speculative decoding (SD) across edge and cloud. A compact draft model deployed on the edge generates candidate tokens rapidly, and a large verifier model on the cloud validates these tokens in parallel. Accepted tokens are retained, while only rejections trigger verifier correction, substantially reducing the number of cloud queries. Our plug-and-play design shifts the bulk of computation to the edge, significantly lowers inference time and cloud cost, and preserves the accuracy of the big model without any retraining requirement. Our approach demonstrates a practical path toward scalable, cost-efficient, and accurate deployment of LLMs in real-world environments. Experimental results across multiple Natural Language Processing tasks using SpecBench and CNN/Dailymail datasets demonstrate that \our{} reduces the cloud model calls by $76\%$ with zero loss in accuracy as compared to the full model.

RNA-Protein Interactions (RPIs) are critical for regulating cellular functions. While traditional wet-lab experiments for RPI detection are costly and time-consuming, Deep Learning (DL) methods provide an efficient computational alternative for RPI Prediction (RPIP). In particular, Graph Neural Networks (GNNs) are promising, as they naturally model RPI networks. However, existing GNN-based methods often rely on homogeneous graphs or predefined meta-paths, which limit their ability to handle data sparsity and to generalize to cold-start scenarios involving unknown molecules. To address these limitations, we propose Edge Generation-guided Relation-aware Learning (EGRL), a novel framework with several key components: implicit meta-path learning to capture relational semantics without handcrafted paths; a multi-relation-aware attention mechanism for adaptive fusion of interaction patterns; a graph generator that predicts potential ("soft") edges to support cold-start nodes; and a multi-feature fusion predictor for final interaction scoring. EGRL is jointly trained with a primary task loss and an auxiliary generator loss. Comprehensive evaluations on four benchmark datasets demonstrate that EGRL achieves competitive overall performance. More importantly, it exhibits superior generalization in cold-start settings, achieving an Area Under the Receiver Operating Characteristic curve (AUROC) of 0.867 and an Area Under the Precision-Recall curve (AUPR) of 0.861 on unknown molecules, corresponding to improvements of 8.6% in AUROC and 5.0% in AUPR over prior state-of-the-art methods. The code will be released soon.

Mixture-of-Experts (MoE) models are attractive for edge deployment because they provide high model capacity while activating only a small subset of parameters per token, improving compute efficiency. However, MoE inference at the edge is fundamentally limited by memory. Expert parameters are large and often reside in off-chip memory due to capacity, cost, and power constraints, putting expert loading to the critical path. We present APEX: Adaptive Expert Prefetching, a predictive resource management framework that overlaps expert loading with useful computation. APEX introduces a lightweight prefetch router that predicts candidate experts before the attention block to dynamically fetch additional experts using a learned confidence model. This adaptive strategy achieves over 99% overlap accuracy, significantly outperforming fixed top-k prefetching techniques. APEX supports two execution modes: a correctness-preserving mode that guarantees exact routing semantics, and a stall-free mode that eliminates residual stalls by operating on available experts with negligible impact on application accuracy. Across multiple MoE models, the correctness-preserving mode reduces per-token latency by up to 26% and improves energy-delay product (EDP) by up to 41% over state-of-the-art baselines, while the stall-free mode provides additional efficiency gains with negligible impact on application accuracy. These results establish adaptive, confidence-driven expert prefetching as an effective approach for efficient MoE inference on edge systems.

Accurate fabric alignment is a critical step that must be performed before sewing. This paper presents a novel automated fabric alignment system. The system estimates the poses of top and bottom fabric panels, lying flat and wrinkle-free in arbitrary positions, using a new Global Local Weighted Iterative Closest Point (GLW-ICP) method. The system then manipulates the top panel to achieve precise alignment at both edges and sewing lines. Unlike conventional approaches, GLW-ICP robustly aligns both global edges and local sewing lines by globally aligning fabric edge points and locally aligning sewing line points to their corresponding CAD model points, while removing unmatched points in occluded regions. Real-world experiments with various fabric shapes show that the system consistently achieves millimeter-level alignment accuracy under both occlusion and non-occlusion conditions, demonstrating its effectiveness and suitability for automated fabric alignment in practical scenarios.

This work presents a visual odometry (VO) system that leverages image edge features. Edges are spatially expressive cues commonly present across diverse environments, offering rich textural and structural information. However, existing edge-based VO methods often fail to fully exploit this potential. To this end, we introduce a novel feature representation termed \textit{organized edges}, which transforms disjoint edge pixels into sequentialized clusters, enabling more effective retention and utilization of the underlying textural and structural information. Another nice property of this formulation is that organized edges can perform edge-level association across multiple frames, enabling the establishment of a co-visibility graph. To achieve precise and efficient pose estimation, we propose a range of particularly designed tracking and joint optimization methods based on the characteristics of organized edges. For tracking, we formulate edge-wise rather than pixel-wise residuals to achieve robust and accurate inter-frame registration. For joint optimization, we introduce a novel shape-preserving edge-fitting method and an organized edge-based Bundle Adjustment (BA) approach, which decomposes the traditional BA problem into fitting and registration to preserve the structural integrity. Based on these novel techniques, we develop a complete VO system that exclusively employs organized edge features, achieving efficient tracking and precise local mapping. Extensive experiments demonstrate its accuracy and robustness in indoor environments, outperforming or achieving comparable performance to state-of-the-art methods. The source code is publicly available at https://github.com/liumingrui814/ROEVO

Temporal graph learning has become essential for analyzing real-world systems whose interactions continuously evolve over time, including financial transaction networks, communication systems, and online social platforms. However, learning from large-scale temporal graphs remains computationally challenging when networks are dense and rapidly changing. To address this limitation, we propose a network-curvature-inspired edge sparsification framework for dynamic graph learning. Our proposed method, TRicci, extends classical Forman-Ricci curvature to directed weighted temporal graphs by capturing structural support, temporal recency, and local interaction competition. Experiments on 9 transaction networks and 3 temporal graph benchmark datasets demonstrate that the proposed framework preserves predictive performance across multiple graph-level prediction tasks. The results show that TRicci sparsifies temporal graphs by approximately 80% while reducing end-to-end downstream training and inference time by an average of 55.94%, without substantial degradation in predictive performance. Our findings suggest that temporal curvature can serve as a principled basis for scalable temporal graph learning by preserving predictive temporal-structural information under substantial sparsification.

Deploying three-dimensional deep learning frameworks to low-power embedded processors is bottlenecked by the unstructured nature of spatial data and the resource-intensive distance sorting algorithms often used before neural network inference. To address this gap, this paper presents a hardware-constrained workflow optimized for native execution on the Raspberry Pi 5. To account for the reality gap between noiseless, clean computer-aided design (CAD) datasets and real-world sensor data, we use physics-based simulation to construct a synthetic LiDAR dataset. Cross-dataset evaluations demonstrate a substantial drop in classification accuracy when networks trained on clean CAD data are evaluated on synthetic LiDAR sensor data, highlighting the critical need for sensor-aware training. To address the latency bottleneck of traditional geometric preprocessing on edge CPUs, we integrate an isolated, feature-driven Critical Points Layer (CPL) as a frontend filter. Our results show that the pretrained CPL deterministically compresses raw 1024-point clouds to a subset of 40 to 60 unique coordinates. When profiled on the ARM Cortex-A76 processor, the complete pipeline achieves an inference throughput of approximately 50 FPS while maintaining an instance classification accuracy of 88.36%, demonstrating the viability of deterministic real-time 3D perception at the edge.

Neural operators have become a central tool for solving partial differential equations (PDEs), with spectral operators offering efficient global mixing across spatial locations. However, many PDEs contain physics-sensitive local structures that are critical to the underlying physical behavior. For example, in Darcy flow, local material interfaces are often reflected by sharp changes in the permeability field and can strongly influence the solution. Existing spectral operators primarily adapt modal mixing based on center-point representations, making them insufficiently responsive to such localized structural variations. We propose the Edge-Conditioned Spectral Operator (ESO), a novel spectral operator framework that modulates global spectral mixing using local edge-wise variations. By incorporating the Pairwise-Variation Modal Mixer (PVMM) to inject local edge information into spectral mode selection, ESO preserves the global approximation capability of spectral neural operators while enabling the learned kernel to adapt to physics-sensitive local structures. Furthermore, we introduce a task-adaptive Physics-Aware Reweighting (PAR) that emphasizes physically important regions, identified by taskspecific physical quantities. Across nine PDE benchmarks, ESO consistently achieves state-of-the-art performance. Visual and region-wise analyses further demonstrate that ESO reduces solution errors near coefficient jumps, high-gradient flow structures, and other physically sensitive regions. The code is available at https://github.com/Tanpig-X/ESO.

Transformers provide a powerful architecture for global content-based matching, but reasoning problems may benefit from a stronger inductive bias toward iterative traversal of latent relations. We introduce Graph Machine, an architecture with two explicit edge-based mechanisms: Edge-augmented attention, in which edges modulate attention between nodes, and edge-centric referral, in which nodes exchange addresses to update their edges. Conceptually, this enables the model to dynamically and differentiably construct and revise relational graphs across layers. We study this inductive bias using Sudoku under controlled settings and find that Graph Machine outperforms Transformer baselines, with ablation studies and mechanistic analysis attributing the gains to the edge mechanisms. Surprisingly, we found that the model discovers a compact edge-based construction for Sudoku geometry. Our results support explicit edge mechanisms as a promising architectural design, motivating broader evaluation.

Edge inference is a promising paradigm to provide large language model (LLM) inference services in next-generation mobile networks. LLM inference mainly relies on two approaches: Autoregressive decoding (AD) generates output tokens sequentially, resulting in long latency; Speculative decoding (SD) accelerates inference by using a small language model (SLM) to generate multiple draft tokens for LLM verification, but incurs extra memory costs. Due to this latency-memory tradeoff, neither approach alone can efficiently serve users with heterogeneous demands under limited edge computing resources. To address this challenge, we propose a hybrid autoregressive-speculative inference (BALANCE) framework for edge LLM inference. In BALANCE, an edge server hosts both an SLM and an LLM, assigns each user to AD or SD, and performs the two modes simultaneously. To maximize the number of served users, we formulate a task throughput maximization problem to jointly determine user scheduling and computing resource allocation between AD and SD under user latency requirements and server memory constraints. Since the problem is NP-hard, we develop a polynomial-time algorithm that transforms the original problem into two sub-problems and obtains a sub-optimal solution with a constant approximation guarantee. Experiments demonstrate that BALANCE consistently outperforms conventional AD and SD and significantly improves task throughput.

Physical AI policies require inference throughout their lifecycle, including model evaluation, cloud reinforcement learning rollout, edge GPU serving, and onboard deployment. Although these settings share the same checkpoint and action semantics, they often rely on separate inference programs. To unify them, we build PhyAI, a Physical AI inference engine with a single runtime that keeps architecture-specific conditioning, solver, cache, and output logic in model adapters while sharing graph execution, kernels, memory management, and parallel services. The same codebase runs vision-language-action (VLA) models and world-action models (WAMs) on single or multiple GPUs across onboard, edge, and cloud deployments. We used the adapter interface to add MiniCPM-Robot on the day of its release. PhyAI achieves 1.40x-4.65x speedups over the official implementations of pi0, pi0.5, GR00T N1.7, and MiniCPM-Robot. On Cosmos3-Nano-Policy-DROID it reduces latency from 2.46 to 1.18 s on eight H20 GPUs (CFG=2, TP=4), a 2.08x speedup. Specialized runtimes remain faster in several configurations, so our goal is one runtime with competitive latency rather than the fastest result in every case. Detailed profiles reveal why different models need different execution policies: on a Hopper-series GPU at batch size one, the pi0.5 action expert accounts for 8.8% of FLOPs but 57.2% of latency; at batch size 32 its share drops to 13.5% and throughput reaches about 100 samples/s. Cosmos3 remains generation-dominated and gains only 14.3% throughput as batch size increases from 1 to 16. We further introduce the control-time Roofline, which distinguishes inference-bound from environment-bound control; the measured pi0.5 points on four LIBERO suites are environment-bound while Cosmos3 stays inference-bound. Code and benchmarks: https://github.com/mingti-org/phyai.

With the ever-increasing pervasiveness of smart edge devices, the demand is growing for applications that can be tailored to users (e.g., custom keyword spotting) or patients (e.g., adaptive health monitoring). Yet, most edge devices rely on fixed inference algorithms and thus cannot learn on-device to personalize predictions. When they can, devices typically support only a specific learning scenario, such as few-shot learning (FSL): going beyond this requires resorting either to another specialized device or to cloud-based retraining, which implies significant energy and latency overheads, a lack of real-time capabilities, and privacy concerns. In this work, we introduce embedder-centric learning (ECL), a framework that unifies four different online learning scenarios: FSL for on-the-fly customization, continual learning (CL) for knowledge accumulation, zero-shot learning (ZSL) for leveraging semantic data, and in-context learning (ICL) for adapting beyond classification. We demonstrate in silicon that ECL can be deployed on resource-constrained devices across four real-world use cases representative of the aforementioned learning scenarios. Our approach establishes a new state-of-the-art performance for FSL character recognition (Omniglot: 96.8% for 5-way 1-shot, 83.3% for 32-way 1-shot), and the first hardware baseline for CL in keyword spotting (NeuroBench keyword FSCIL: 71.8% for 200-way 5-shot). Moreover, we present the first hardware demonstrations of ZSL with semantic data (60.6% for 5-way spoken sentence classification) and ICL (46.2% at the 500th token of RegBench) operating at micro-to-milliwatt power budgets. Therefore, by unifying multiple learning scenarios, we pave the way for smart and versatile devices that can adapt right at the edge, without reliance on the cloud.

Industrial and autonomous systems increasingly depend on AI, automation, and real-time coordination to act on operational data as it is generated. Yet conventional architectures often require that data to pass through centralized platforms before decisions can be made. Cloud systems remain valuable for training, reporting, and long-term analytics, but they add latency and external dependencies to the critical decision path and become harder to scale as each new site adds additional edge devices and data. As intelligence spreads across machines, sites, facilities, and vehicles, continued dependence on centralization will constrain response time, resilience, scalability, and autonomous operation. This paper presents the AnyLog Edge Data Fabric, an agent- and edge-based platform that manages operational data at its source while presenting distributed data, assets, compute resources, and services as one logical system. Through its Distributed Metadata Layer, Virtual Data Lake, Unified Namespace, Single System Image, and Model Context Protocol, authorized users, applications, automation services, and AI agents can discover, query, process, and act on distributed resources without knowing where they are hosted. Queries and computation execute at the agents holding the relevant data, so only requests and results traverse the network. This preserves local ownership, reduces data movement, supports continued operation during connectivity disruptions, and enables repeatable deployment from validated digital-twin configurations. AnyLog provides a cloud-like operating model for distributed SQL, real-time automation, Edge AI, federated learning, and resilient decision-making without a single point of failure or any dependence on centralized infrastructure.

LLM agents following the ReAct paradigm are promising enablers of complex multi-step tasks, including multi-hop question answering, code generation, and control of physical AI systems. Yet, when deployed at the edge, they must tightly manage their reasoning budget while remaining reliable and deferring to a cloud-side model only when local uncertainty is too high to act safely. We propose Think Short, Defer Smart (TSDS), a framework that synergistically integrates a lightweight convergence probe, which halts on-device reasoning once the intended action has stabilized, with a perplexity-based deferral rule that escalates uncertain actions to a cloud-side model. Both mechanisms are jointly calibrated on end-to-end episode trajectories via a multi-objective Learn-Then-Test (LTT) procedure, providing simultaneous finite-sample guarantees on expected episode reward and cloud-call rate. We evaluate TSDS on four ReAct benchmarks spanning arithmetic reasoning (GSM8K), multi-hop question answering (HotpotQA), code generation (MBPP), and multi-step embodied planning (household robot), and compare against thought-calibration-only and calibrated-deferral-only standalone baselines. TSDS reduces per-episode thinking compute by 43%-73% over deferral-only baselines across HotpotQA, MBPP, and the household robot task, while maintaining certified reward and cloud-call rate guarantees.

Reinforcement learning (RL) fine-tuning is widely used in language model training to improve model performance on a target task while limiting drift from a reference policy. A standard way to balance this trade-off is via a KL-regularized RL objective, although this formulation does not by itself provide a principled way to set the regularization coefficient. In practice, the coefficient is typically chosen heuristically or via hyperparameter search, which can lead to unnecessary overhead in training cost or undesirable reward-retention trade-offs. We instead propose a game-theoretic framework that gives this trade-off an explicit statistical interpretation. Specifically, we study a sequential game in which an agent chooses a policy to maximize cumulative reward while a monitor observes policy outputs over time and tests for deviations from the reference policy. Although not originating from the same perspective, we show that the resulting equilibrium policy can nonetheless be expressed as the solution to a KL-regularized RL problem for an optimal regularization parameter that can be viewed as maximizing reward per unit of statistical distinguishability. Drawing on classical results from concave-convex fractional programming, we provide a principled method for learning this equilibrium coefficient via reduction to the KL-regularized RL objective, thus allowing for flexible integration into standard fine-tuning pipelines. In experiments with Qwen3-8B and Llama-3.2-1B, we demonstrate that our methods result in competitive reward-retention trade-offs in a continual learning setting, and illustrate how our framework may be used to audit API providers serving open-source models.

We investigate lightweight raptor-species classification for real-time edge deployment in wind-turbine collision mitigation. Using DINOv2-L (304M parameters) as a teacher, we distilled three lightweight students (MobileNetV4, ViT-Small, and EfficientNet-B0). To reduce confusion between closely related species, we expanded the dataset to 12,519 images, including an increase in Steller's Sea Eagle images from 463 to 2,050 via video-frame extraction. Under a group split that separates samples at the video- and source-image level to mitigate source leakage at that granularity, the three-student ensemble achieved a macro recall of 0.935 +/- 0.004 over five distillation seeds (0.955 on a conventional image-level split, retaining 97.5% of the teacher's macro recall) with roughly one-eighth as many parameters. On a subset of 1,258 images disjoint from the former training images, White-tailed Eagle recall improved by up to 38.6 percentage points, while the rate at which it was misclassified as the Steller's Sea Eagle decreased from 61% to 15% of errors. TensorRT FP16 deployment of EfficientNet-B0 on an NVIDIA Jetson Orin Nano achieved 3.19 ms/image including host-device transfer (313 images/s), with 99.95% argmax agreement with FP32. In five-seed controlled comparisons, neither distillation (versus CE-only) nor the change from a DINOv2-L to a DINOv3-L teacher yielded a clear ensemble-level improvement; the primary gains stem from the dataset expansion and teacher re-fine-tuning.

Large Language Models (LLMs) are increasingly deployed as autonomous agents, transitioning from static conversational interfaces to dynamic systems capable of complex reasoning, tool execution, and decision-making. However, the operational reliability of these agentic AI systems is fundamentally challenged by the absence of reliable ground truth in open-ended environments and the risk of increasing operational drift over time. To address this challenge, we propose and experimentally evaluate an agentic AI framework, designed to enforce autonomous integrity within LLM-driven systems. We design a self-calibration mechanism that mitigates drift and dynamically approximates ground truth by incorporating an ARIMA forecaster, without requiring continuous human oversight. To demonstrate the effectiveness and reliability of our methodology, we apply it to the complex domain of profiling the resource usage of zero-knowledge workloads in edge computing networks. Experimental results show that the proposed self-calibrating agentic framework successfully profiles the zero-knowledge workloads, achieving a higher accuracy than baseline LLM agents by 91.7% for resource usage prediction and improving the prediction speed by 71.7% compared to pure profiling, establishing a robust foundation for deploying autonomous AI in decentralized infrastructures. Furthermore, the ground truth generation using the proposed ARIMA leaping algorithm is 52% faster than a standard ARIMA forecasting algorithm, while achieving the same accuracy.

Instance-level explanations aim to reveal the rationale behind a model's decisions for a specific graph. Previous methods explain graph neural networks (GNNs) by selecting important edges to induce subgraphs, where edge importance is assessed by perturbing each edge and observing changes in the model predictions. However, they often neglect the synergistic effects among edges, which are crucial for accurately characterizing edge importance. To address this issue, we propose SeeExplainer, a parameter-free explainer to interpret GNNs. Specifically, we first introduce a granular-ball graph refinement mechanism that decomposes a graph into several disjoint granular-balls with no fixed size, and utilize them as nodes to construct a structural graph. This process can better capture the synergistic effects among edges. Then, we perturb nodes and edges in the structural graph to generate explanatory subgraphs based on their respective contributions. Experiments on several graph classification datasets of different networks show that SeeExplainer outperforms state-of-the-art baselines.

We are moving from an information age to the age of intelligence. A decade, or possibly less than that, data will not be the gold anymore rather the derived intelligence out of the data and the information we posses from the edge of the network. Existing Edge Intelligence research focuses mainly on two directions: using AI for edge resource management and deploying lightweight AI models on edge devices. However, existing edge computing research lacks an intelligence-centric framework in which derived intelligence is treated as a first-class, independently manageable entity that can be described, discovered, observed, shared, reused, and dynamically clustered across heterogeneous edge devices and applications. To address these research gaps, we introduced Clustered Edge Intelligence, a visionary intelligence-centric approach. The aim of CEI is to make intelligence a shareable and reusable first-class entity that can be independently represented, discovered, observed, exchanged, and managed across the distributed edge-cloud continuum. We present a three layer CEI architecture and examine enabling technologies and research dimensions, including intelligence inventories, semantic knowledge representation, communication, discoverability, observability, lifecycle automation, clustering mechanisms, marketplaces, interoperability, and standardization.

We propose CEDAR (Causal Edge Discovery for Autoregressive Processes), a constraint-based method for lagged causal edge discovery in sparse autoregressive time series. CEDAR screens candidate cross-variable lags using AR(1)-residualized, U-centered distance correlation, then applies two targeted conditional-independence tests per significant cross-variable lag candidate and accepts at most one lag per ordered pair. A stable MCI pruning step removes indirect edges, and optional deterministic C-nodes adjust for specified trend-like nonstationarity. In sparse regimes where few lags survive screening, CEDAR requires $O(d^2)$ CI tests after screening while retaining edge-level interpretability. CEDAR is most effective when data are scarce and variables exhibit lag-1 self-dynamics; methods with richer conditioning sets become preferable as $T$ grows or when higher-order autoregressive or simultaneous multi-lag effects are common.

Civil aviation is safety critical and its operations, from flight decks and towers to ramps and maintenance, generate massive, heterogeneous data at the network edge. Yet cloud centric deployment of large Artificial Intelligence (AI) models often produces high task latency, lacks offline capability in communication denied environments, and requires centralizing sensitive data, raising privacy and sovereignty risks. Edge AI moves perception, prediction, and decision logic closer to the data producers via compression, collaborative inference, and split learning, thereby reducing latency, bandwidth, and exposure while enabling graceful operation during disconnections. This paper provides a panoramic view and a common understanding of edge intelligence tailored to civil aviation. We firstly articulate the operational motivations for edge AI, and then review recent techniques for edge inference and edge learning. We then introduce the organizational computing paradigms and the respective configurations in civil aviation environments; finally, we describe the emerging applications and the future research trends of edge intelligence in civil aviation. We argue that a refined edge solution can complement cloud foundations to deliver low latency, privacy preserving, and resilient AI services across the civil aviation lifecycle.

Several edge computing platforms, such as autonomous vehicles and smart sensing devices, need to adapt to dynamic environments in real time by learning from new data in the field. Continual learning has emerged as a promising solution for edge training, by incorporating techniques that successfully combine a highly summarized version of previously trained data (to avoid catastrophic forgetting) with recently sensed data. However, as is the case with other ML algorithms, continual learning generates significant data movement between general-purpose CPUs/GPUs and memory, impacting the suitability of continual learning for edge platforms. In-memory computing (IMC; also known as processing-using-memory) can curtail this waste and make continual learning feasible at the edge, but it faces two unique challenges: (1) IMC architectures make use of noisy computation operations that significantly harm training accuracy; and (2) IMC architectures have poor and often incomplete support for resource-efficient training. To address these challenges, we propose CLASP (the Continual Learning Acceleration System Platform), which to our knowledge is the first end-to-end system with IMC acceleration for continual learning. The hardware and software of CLASP are co-designed to support a wide range of continual learning algorithms, through software-visible assembly-level instructions that can be incorporated without constraints into ML-based algorithms. CLASP is designed around a back-end-of-line (BEOL) compatible ECRAM device that we fabricate, which can overcome the challenges of IMC-based training using other emerging memory devices. We show that CLASP with ECRAM approaches the accuracy of in-GPU training, while delivering a speedup of 67x and energy savings of 132x for learning without forgetting and experience replay using MNIST.

Deploying a vision-language model with full UI understanding on end devices has long been trapped between accuracy and efficiency: on one side is the accuracy bar for OCR, screen understanding, visual question answering, and element grounding; on the other is the strict compute, memory, and power budget of mobile chips. Existing work either trades one for the other, or stops at simulation without real-device validation. We present StepX-Edge, a 0.9B-parameter on-device UI vision-language model that resolves this tension through three-layer co-design of architecture, training, and deployment. Architecturally, UI-aware Layered Visual Encoding (ULVE) and a Progressive Dimensionality Projection (PDP) connector target the extreme aspect ratios and fine-grained perception of screens, while standard full attention throughout ensures native compatibility with mainstream mobile NPU operators. For training, the five-stage StepX-Curriculum framework is designed around our observation of mutual-promotion effects among UI subtasks, so that all four capabilities grow synergistically under a tight parameter budget rather than interfering. For deployment, a module-wise differentiated two-stage PTQ-to-QAT quantization scheme keeps the post-quantization accuracy loss within 1%. StepX-Edge achieves the strongest overall UI understanding among <=1B models, surpassing all 2B-2.3B baselines on ScreenQA (88.76 F1) and Chinese OCRBench v2 (57.25), and matching 1.3B-2.3B general VLMs on RefCOCO (92.0%) and OCRBench v1 (831) with far fewer parameters. After W4A16+KV8 quantization, the model runs stably on Snapdragon 8 Gen5 devices with ~0.84 s TTFT, 98 tok/s decode, and 1.4 GB peak memory. We will open-source the training data, the full training recipe, and the quantization deployment pipeline.

The edge-of-chaos heuristic has long served as a guiding principle for designing reservoir computers, yet its relevance to machine performance remains elusive. Here, taking the spectral radius of the reservoir network as the control parameter, we show that the radius yielding the best forecasting performance does not coincide with the Lyapunov edge of the isolated, teacher-forced, or closed-loop generative reservoir. By analyzing the collective dynamics of the teacher-forced reservoir, we find that the target dynamics are represented mainly by stable Lyapunov modes whose finite-time stability is strongly modulated by the input. This finding motivates a stability-expressivity transfer index, which balances the stability of these modes against their expressivity in representing the target. Across chaotic and quasiperiodic targets, and for both asymmetric and symmetric reservoirs, this index accurately identifies the optimal spectral radius for autonomous forecasting.

Stream-processing systems increasingly operate across heterogeneous mobile edge--cloud infrastructures, where workload volatility, resource contention, and stringent quality-of-service (QoS) requirements complicate decentralized scheduling. This paper proposes \emph{MAS-DecStream}, whose main contribution is \emph{LLM-MR-CNP}: an extension of the classical Contract Net Protocol with semantic CFP formulation, progressive context disclosure, multi-round proposal revision, negotiation memory, and deterministic validation. Edge-cluster agents refine natural-language offloading proposals from local observations, predicted resource states, and qualitative runtime context, while hard resource and QoS constraints remain deterministic. Experiments derived from the Alibaba ASI Trace evaluate the extension at three levels: single- versus multi-round CNP, rule-based versus LLM-assisted refinement, and fixed-model single- versus multi-round negotiation. Under the evaluated configurations, MAS-DecStream reduces latency violations to 3%, eliminates resource overcommitment, reaches a conflict-resolution rate of 0.91 with 20 agents, and improves utility by up to 22% over the multi-round rule-based baseline. A separate 25-case evaluation shows model- and prompt-dependent accuracy--cost trade-offs. The results provide initial evidence that multi-round CNP refinement is the principal protocol-level gain, with LLM assistance adding value for qualitative and uncertain runtime context.

Although mixture-of-experts, MoE, models have been increasingly adopted to scale large language models with moderate computation cost, it remains challenging to deploy MoE inference over resource-constrained and bandwidth-limited edge infrastructures. Existing distributed MoE serving methods mainly rely on exact expert placement, caching, replication, or communication scheduling, while overlooking the functional similarity among experts, which provides an opportunity to reduce cross-server token transmission. Therefore, this paper introduces a similarity-aware expert allocation and distributed deployment framework, dubbed OrderMoE, which aims to accelerate edge MoE inference while balancing inference latency, communication overhead, server workload, and inference quality. OrderMoE first constructs an expert similarity model based on router-induced logits representations and partitions experts in each MoE layer into multiple similarity groups. Then, it develops a similarity-aware expert grouping and deployment strategy to improve local similarity coverage across edge servers. Since reducing remote expert invocation and preserving exact inference quality are conflicting objectives, OrderMoE further designs a quality-aware and trajectory-aware runtime server-expert selection algorithm to decide whether a token should invoke its remote target expert or use a feasible local substitute expert. Experimental results on a real distributed edge testbed show that OrderMoE significantly reduces average latency, tail latency, cross-server traffic, and remote expert invocation ratio, while introducing only small and controllable inference quality degradation.

Edge computing brings unique challenges as the resources on the edge are highly diverse in capabilities and capacities, and highly distributed across many users and the physical world. Existing distributed computing frameworks cannot adequately handle this level of heterogeneity and distribution. This paper proposes EdgeFaaS, a novel function-based edge computing framework to enable edge applications to effectively utilize heterogeneous resources distributed across the Internet of Things (IoT), edge, and cloud for computing. It proposes function virtualization and storage virtualization to abstract distributed and heterogeneous physical resources and provides consistent virtual interfaces for deploying and executing functions and storing and accessing data. EdgeFaaS provides comprehensive support to diverse edge computing workflows, and at the same time allows users to flexibly adjust the configurations and explore various important tradeoffs. To demonstrate its usability, the paper also presents the implementation and evaluation of three representative workflows on EdgeFaaS for video analytics, federated learning, and audio classification, on a real testbed of 100+ geographically distributed IoT devices, edge servers, and cloud services. EdgeFaaS allows users to flexibly explore the deployment configurations of these workflows over distributed and heterogeneous resources. For example, users can easily vary the function placement of the video processing pipeline across IoT, edge, and cloud resources and study the tradeoff between computation and communication costs; users can also flexibly adjust the cluster count and size in the hierarchical federated learning system and explore the tradeoff between training accuracy and speed.

Active beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) enables hybrid transmitting and reflecting mode to achieve effective signal amplification and full-space coverage, thus providing a promising solution for blockage-aware uplink offloading in heterogeneous mobile edge computing (MEC) systems. However, practical hybrid mode active BD-RIS are realized by reciprocal devices, which inherently generate cross-sector energy leakage that will reshape the system-level energy-latency tradeoff. This paper studies energy-aware offloading and resource allocation for reciprocal active BD-RIS-assisted heterogeneous MEC, where offloading decisions, CPU/GPU computation allocation, transmit powers, receive processing, and active BD-RIS are tightly coupled. The resulting problem is a high-dimensional mixed integer nonconvex problem and is difficult to solve efficiently by conventional per-instance optimization. To address this challenge, we develop an end-to-end joint optimization framework based on a refined version of the distributional soft actor--critic algorithm, named as DSAC-T. By modeling return distributions rather than only expected values, DSAC-T improves policy stability under reward heterogeneity and feasibility-boundary sensitivity. Compared with other baseline algorithms, DSAC-T achieves the best energy-latency reward, the highest feasibility ratio of 81.67%, and a fast online decision time of 0.0267 s per scenario.

On-device LLM inference faces a trilemma of response latency, limited hardware resources and user privacy. Full cloud inference delivers strong computing power but exposes user prompts and dialogue data, while standalone on-device inference is unfeasible for most consumer and embedded edge devices. This paper presents a privacy-centric edge-cloud collaborative LLM inference framework built on endpoint-authenticated KV cache. Local endpoints handle input preprocessing, embedding computation, adaptive feature optimization, KV cache authentication, speculative decoding and low-dimensional model head calculation, while the cloud conducts authenticated decoder inference, KV cache management, token verification and high-dimensional vocabulary projection. Endpoints fuse partial outputs, apply language-adaptive masking and sample target tokens. All transmitted data and truncated logits are quantized and AES-GCM encrypted for privacy, with core lightweight modules, draft parameters and cache access policies kept local to avoid leakage. The framework supports heterogeneous devices including CPU-only, GPU-equipped and embedded devices via optimized streaming, batching and quantized ONNX deployment. Evaluations demonstrate that the framework reduces per-token latency by up to 46.1% and downlink payloads by up to 67.4% over baseline split inference, retaining comparable performance to full cloud inference.

Large Language Models (LLMs) are rapidly moving from research settings into the wild, deployed on enterprise infrastructure, personal devices, and edge platforms. While cloud deployments offer scalable compute, concerns over data sovereignty, compliance, latency, and third-party dependence are driving organizations toward edge and on-premise LLMs. This shift introduces new security and privacy challenges: limited compute and memory force aggressive optimizations, including quantization, pruning, model partitioning, and parameter-efficient adaptation, each of which can introduce vulnerabilities and reshape the threat landscape. We describe this tension as the Security-Efficiency Paradox, mechanisms that improve efficiency may weaken robustness, expose new attack surfaces, or increase privacy risks. We examine how compression can degrade safety alignment, how partitioned inference enables reconstruction attacks, and how continuous local adaptation may cause privacy leakage and model drift. To analyze these risks, we introduce a deployment-centric taxonomy organized around three architectural constraints: the Memory Wall, the Quadratic Wall, and the Compute Wall. We derive a unified constraint model that quantifies when unsafe optimizations become unavoidable, linking each wall to specific attack surfaces. Building on this model, we propose the Secure Operational Efficiency Score (SOES), a holistic metric balancing task accuracy, jailbreak resistance, and privacy against energy, memory, and latency, enabling practitioners to configure edge LLMs under real-world hardware limits. We further present a practical decision procedure and targeted mitigations for each optimization-induced vulnerability. Together, these contributions provide a co-designed framework for jointly evaluating security, privacy, and efficiency, laying a foundation for securing edge-native intelligent systems.

Medical image classifiers are often trained within one source population, yet clinical deployment requires robustness to patients whose appearance, acquisition style, and disease prevalence differ from the source cohort. Existing fairness and robustness methods often require group supervision or treat appearance variation as an undifferentiated nuisance, which is insufficient when population-correlated low-level cues and lesion evidence share edge and texture structure. We study a strict source-only cross-population setting, where external populations are unseen during optimization, validation, scheduling, hyperparameter and model selection. We propose RED-Sphere, a plug-and-play robustness framework for image classification under unseen population shifts. It estimates shortcut-sensitive nuisance responses with an edge and feature energy prior, attenuates dominant responses through residual soft gating, regularizes masked nuisance views with counterfactual-inspired consistency and separation losses, and predicts labels with normalized spherical prototypes. It favours angular semantic evidence over source-correlated activation magnitude while preserving lesion structure. Although demonstrated on 2D Scanning Laser Ophthalmoscopy (SLO) fundus classification for Age-Related Macular Degeneration (AMD) and Diabetic Retinopathy (DR), RED-Sphere is not tied to retinal anatomy: the same principle can be adapted with modality-specific nuisance priors wherever appearance shortcuts and semantic evidence are entangled. Under a strict White-only Harvard-FairVision protocol, RED-Sphere improves held-out macro-F1 across all 20 task and backbone comparisons, with average gains of 1.28 and 2.98 F1 points on AMD and DR. Gains in AUC and PR-AUC, visual diagnostics, ablations, and sensitivity analyses further support stronger external semantic alignment and more stable angular disease geometry.

In this paper, we provide a systematic investigation of SO(2) theory to machine learning interatomic potentials (MLIPs) and identify the limitations of conventional SO(2) Linear architectures relative to SO(3) Clebsch-Gordan Tensor Products (CGTP). Building on these insights, we propose direct Cartesian construction and recursive Clebsch-Gordan construction of Wigner D-matrices and introduce two novel interaction building blocks. First, we propose the Edge Complex Product Basis based on Generalized Asymmetric Contraction, a new formulation for many-body expansion that directly constructs higher-order interactions on edges through complex-valued equivariant multiplications. Second, we introduce Radial Rotary Complex Attention(RRA), which enhances extrapolation performance and surpasses existing attention vector formulations. We also introduce several improvements to the Atomic Cluster Expansion module. Building on these advances, we train our models on OMat24, sAlex, and MPTrj, and introduce TECE-OAM-RRA-1.0, which achieve state-of-the-art (SOTA) performance on the Matbench Discovery.

Modern satellite edge systems, including those performing remote sensing tasks such object detection and tracking, are characterized by severely limited bandwidth and intermittent connections, making continuous data transmission to the cloud impractical. Existing edge-cloud systems, however, either require heavy pre-processing before analysis, for instance, full decompression of imagery data, or transmit all compressed data regardless of relevance. To address these challenges, we design DynaFilter, a dynamic filtering technique that enables satellite edge devices to perform selective region-of-interest (RoI) inference directly in the compressed-domain, without full decompression. Our key insight is that low-level compression syntax, specifically DC coefficients/AC energy in JPEG images and motion vectors in video streams, exhibits strong correlations with high-level semantic queries. By establishing a precise mapping between cloud query semantics and multimodal compressed-domain features, DynaFilter enables the edge to identify and transmit only relevant data associated to RoIs. Extensive evaluations show that DynaFilter reduces the total volume of pixel data for decoding and subsequent inference by 1.6x-7.1x for images, and achieves 92.0% bandwidth savings for video streams compared to state-of-the-art baselines. Furthermore, it decreases energy consumption by 43.1-88.6% on target devices and achieves a 1.6x-3.0x speedup in inference latency.

The emergence of vision language models with fewer than 3 billion parameters has accelerated the implementation of on-device multimodal intelligence. However, a detailed understanding of component-wise quantization remains a bottleneck for optimal deployment. This paper presents a systematic evaluation framework for empirically validating five hypotheses across six quantization configurations on the Jetson Orin NX and AGX. By separating the vision encoder, projector, and large language model backbone yields the following results: (1) Quantization sensitivity is governed by the structural paradigm (MoE vs. dense) rather than scale alone, with MoE backbones mitigating INT4 noise where dense backbones degrade; (2) SigLIP encoders incur disproportionate INT8 latency on Jetson Ampere--a deployment-specific encoder-kernel-hardware interaction, not a SigLIP flaw; (3) Although INT4 quantization of LLMs greatly reduces VRAM consumption, it also causes slower token generation due to dequantization overhead; (4) Composite quantization errors are largely additive, except along the modality-alignment path, which is architecture-dependent; (5) The intelligence-per-joule profile varies significantly across platforms owing to memory bandwidth constraints.

Recent progress in large-scale self-supervised learning has improved dense geometric prediction, but it remains unclear whether such scaling yields inference-time physical plausibility checks. We propose Scrambled Edges, a controlled counterfactual that injects salient edge-like cues while violating surface continuity, illumination coherence, and occlusion ordering. With energy-matched and structure-matched controls, we isolate the effect of unsupported edge evidence from high-frequency energy and edge sparsity. Across CNN/ViT/SSL depth predictors on NYU Depth v2 and KITTI, Scrambled Edges induce up to 3.2x larger deviation from clean predictions than energy-matched noise; additional diffusion and flow-matching depth estimators show attenuated but still significant collapse. The resulting Geometric Collapse propagates globally: even with oracle knowledge of the corrupted region, output-level repair recovers only 47%, with substantial error outside the mask. These findings provide controlled behavioral evidence that current dense predictors lack reliable mechanisms to quarantine physically unsupported edge cues, motivating explicit plausibility scoring and selective cue integration.

Recent advancements in the Internet of Things (IoT) emphasize the urgent need for advanced network security, as IoT networks feature dynamic topologies, imbalanced traffic, and complex attack patterns. Unlike general IT networks, IoT environments exhibit extreme heterogeneity and sparse topologies. Traditional GNN-based intrusion detection methods often struggle to efficiently model node and edge features or capture fine-grained anomalies in such settings. To address this, we propose SKGFusionKAN, a novel IoT-tailored approach enhancing GraphSAGE with a multi-scale selective kernel attention mechanism. This enables adaptive extraction of node and edge features under diverse traffic conditions. Specifically, our edge-oriented message passing strengthens information propagation, while selective kernel attention adaptively weights edge-derived information from different scales to handle heterogeneity. We also introduce a gated fusion process to dynamically integrate multi-scale features, improving robustness against evolving attacks. Finally, we leverage Kolmogorov-Arnold Networks (KAN) for classification, offering superior nonlinear modeling capabilities essential for detecting intricate, low-frequency attacks. To our knowledge, this work presents a comprehensive integration of GNNs and KAN with dedicated architectural innovations for IoT intrusion detection. Extensive experiments on four NIDS benchmarks show that SKGFusionKAN consistently outperforms state-of-the-art approaches in binary and multiclass tasks, demonstrating its potential for IoT security.

Graphs are commonly visualized in 2D, where humans readily interpret spatial relationships, yet such layouts often distort higher-dimensional structure. We propose to embed graphs in high-dimensional space and search for informative 2D viewpoints that optimize aesthetic and readability metrics (e.g., edge crossings and angular resolution), enabled by a novel differentiable surrogate for edge crossings. Numerical experiments show that these viewpoints consistently outperform standard 2D layouts, and can even surpass methods explicitly designed to optimize these metrics. We further introduce DataFly, an interactive system for exploring multiple candidate viewpoints through seamless navigation. A usability study demonstrates that our approach reveals structural patterns that remain hidden in conventional 2D visualizations.

Modern deep learning has been shown to operate at the edge of stability, routinely using learning rates far larger than those justified by classical optimization theory. Most prior analyses of the edge of stability phenomenon focus on deterministic gradient descent, leaving the stochastic setting largely unexplored. In this work, we provide sharp convergence guarantees for Stochastic Gradient Descent (SGD) applied to the multiclass cross-entropy loss, for both linear classifiers and two-layer neural networks. We show that the stochasticity of SGD may cause the dynamics to alternate between an edge-of-stability regime that is dominated by curvature-driven oscillations, and a stable regime in which the expected loss decreases at a controlled rate. Despite that, we prove that SGD self-stabilizes the dynamics, ensuring that the iterates return to stability in a fixed number of iterations and allowing convergence in the best-iterate sense even with large learning rates. Experiments validate our theoretical findings and illustrate the benefits of SGD in the large-stepsize regime.

Audio deepfakes are a growing challenge for the general public, as well as for journalists and fact-checkers. The latter need reliable tools to verify the authenticity of their sources, while at the same time keeping their information private. Commercial deepfake detection solutions rely on cloud-based processing, which raises privacy concerns. To solve this problem, we propose an on-device audio deepfake detection model. We show that a truncated self-supervised backbone with a simple logistic classifier is both very fast and often more accurate than existing solutions. Our solution outperforms the baseline AASIST by 10% and improves inference speed by 40%. We integrate this model into a browser plug-in, which allows journalists and fact-checkers to detect deepfakes easily and securely. Code for the plugin is available at https://github.com/OctavianPascu97/Audio-Deepfakes-Browser-Plugin.

Multi-agent systems (MAS) are increasingly used to automate complex, distributed workflows. However, their inter-agent communication channels introduce new attack surfaces that remain poorly understood and are difficult to defend against. In this paper, we address how defenders should prioritize limited security effort to protect vulnerable communication channels before attacks are observed. This is motivated by our observation that the channel-level attack impact is highly non-uniform: a single compromised edge can account for up to 75% of total attack success. We introduce Mesa, a label-free framework for proactively ranking which MAS edges are most security-critical -- that is, most likely to affect the system's decision if compromised. Mesa combines six graph-theoretic metrics and two dynamic probes (ablation and masking) without requiring attack traces. We evaluate Mesa against a dynamic misinformation attack pipeline across three diverse MAS scenarios, eight network topologies, and five open-source LLMs from Qwen, Llama, and Gemma families. Mesa rankings correlate strongly with empirical per-edge attack success rate, achieving mean Spearman $ρ=+0.60$ (peaking at $+0.73$). In resource-constrained defense deployment, monitoring the top 10% of Mesa-ranked edges intercepts about 3x the successful attacks as random allocation. We further test Mesa under varying attacker and defender models and LangGraph workflows and characterize its limits under adaptive attacks and high-redundancy graphs. Overall, our results show that edge-level risk in MAS is often concentrated and predictable, allowing proactive hardening of multi-agent infrastructures.

Characterizing the scenario underlying an epidemic from its disease cascade is an important task in simulation analytics. We propose boundary degree, the count of an infected node's contacts in the underlying contact network that were not infected, as a per-node cascade feature for this task. Through systematic ablation on realistic social contact networks of Tennessee and Virginia, we show that boundary degree alone improves scenario identification accuracy by 19%. Edge features, whose importance was observed empirically by prior work, consistently improve accuracy across all settings; we provide theoretical grounding for this observation. These effects are complementary. We prove that certain epidemic scenarios are indistinguishable without boundary or edge information. Prior feature engineering approaches included aggregate boundary statistics, but these were not among the top-ranked feature groups; the per-node representation we propose reveals their importance clearly. Our results suggest that contact tracing applications should track contacts with non-infected individuals, not only transmissions.

With the widespread adoption of AI in various IoT scenarios such as smart sensing and processing, AI chips have become a common component at the edge. These chips are typically specialized for structured neural network (NN) processing and are designed to meet peak workload demands. However, they are often underutilized and suffer from considerable computational waste due to temporal or spatial redundancy in processing. Conversely, general-purpose processing engines at the edge may struggle with compute-intensive tasks such as signal processing and complex numerical operations because of stringent resource constraints. To address this imbalance, we propose a framework that harvests unused AI computation resources using general-purpose approximation techniques. The core idea is to automatically convert traditional computing tasks into neural network models via a representative neural architecture search (NAS) method. These approximate versions of general-purpose tasks are then deployed on AI engines during their idle periods. Specifically, we introduce a runtime scheduler that offloads these tasks to AI chips without compromising the performance of primary AI workloads, thereby alleviating the burden on general-purpose processors. Experiments on a representative AIoT processor show that our proposed AI computation harvesting strategy delivers substantial performance improvements across a set of edge processing tasks.

Recursive reasoning models can solve complex structured tasks with only a few million parameters by repeatedly updating a latent state. Deploying these models on edge hardware requires significant compression, but unlike conventional sequence models, quantization errors compound across recursive reasoning cycles rather than across output tokens. As a result, standard intuitions about compression fail to apply. In this work, we ask what survives when recursive reasoners are compressed. Across a full precision sweep, three tasks, and two recursive architectures, we find that aggressive compression preserves local prediction but destroys global reasoning: cell accuracy holds while puzzle-exact accuracy collapses to zero under naive INT4 pruning, distillation, and linear attention alike. Token-level objectives, including quantization-aware training, cannot repair it. The collapse is architectural -- it strikes MLP-mixing recursion but not attention on the same task -- and we reverse it with per-channel calibrated INT4 without retraining. We also introduce carry-trajectory fidelity, the cosine similarity to the full-precision reasoning path, as a label-free signal that predicts this damage and its recovery before a task evaluation. The combined result is a deployment recipe: flash-streamed embeddings remove a 99.4MB bottleneck, INT8 at one cycle matches full-depth accuracy at 6x fewer FLOPs (8MB SoC), and calibrated INT4 fits a 4MB microcontroller.

Pre-trained transformers have demonstrated remarkable generalization abilities, at times extending beyond the scope of their training data. Yet, real-world deployments often face unexpected or adversarial data that diverges from training data distributions. Without explicit mechanisms for handling such shifts, model reliability and safety degrade, urging more disciplined study of out-of-distribution (OOD) settings for transformers. By systematic experiments, we present a mechanistic framework for delineating the precise contours of transformer model robustness. We find that OOD inputs, including subtle typos and jailbreak prompts, drive language models to operate on an increased number of fallacious concepts in their internals. We leverage this device to quantify and understand the degree of distributional shift in prompts, enabling a mechanistically grounded fine-tuning strategy to robustify LLMs. Expanding the very notion of OOD from input data to a model's private computational processes, a new transformer diagnostic at inference time is a critical step toward making AI systems safe for deployment across science, business, and government.

Production vision pipelines silently degrade on blurry input, wasting compute on downstream OCR, retrieval, and vision-language model (VLM) calls that cannot recover a usable output. We present MagikaDocumentFromPixel, a lightweight, CPU-friendly image quality gate that classifies a single image as sharp, blurred, or uncertain in roughly 7 ms on a single CPU core. The contributions are (i) a recipe selected from a 46-configuration, 8-sweep empirical search that isolates input resolution as the dominant lever and shows architecture capacity only pays off at >= 384 px; (ii) a confidence-aware routing formalism grounded in classical selective prediction; (iii) the Edge Prior Module (EPM), a Laplacian-magnitude auxiliary input channel that gives the network direct access to the spectral evidence that classical blur heuristics rely on and that lifts test F1 by +1.3 points in a matched-env comparison; and (iv) an observation that the gate is one instance of a recurring design pattern that appears independently in Magika content-type detection, risk-controlled OCR with VLMs, and DocVLM. The final recipe MobileNetV3-Large with the EPM trained at 384x384 on paired GoPro Large frames, evaluated with 5-scale test-time augmentation reaches F1 = 0.9803 (AUC 0.9989) with a 17 MB ONNX artifact, improving over our fixed-scale baseline on the same hardware (F1 = 0.9672) by +1.31 points. We are explicit about limitations: results are on a single motion-blur distribution, numbers are from a single seed, and calibration is qualitative rather than measured.

Solving large-scale instances of the Traveling Salesman Problem (TSP) exactly is computationally expensive. Researchers often employ graph sparsification methods to improve computational efficiency. Traditional sparsification methods typically rely on fixed heuristics and fail to fully exploit instance-specific structural information. In this paper, we propose Graph Edge Sparsification (GES), a learning-based sparsification approach for Euclidean TSP. By incorporating geometric structural information and combinatorial optimization technology, our proposed method adaptively generates a sparsification graph for different instances, significantly reducing the graph size and accelerating the solving process. Experimental results demonstrate that our sparsification method can prune up to 95% of edges on the MATILDA dataset, while keeping the solution gap within 1% of the optimal value. Moreover, our approach exhibits strong generalization capability on the TSPLIB benchmark.In some large-scale instances, the pruning rate exceeds 99%, while the optimality gap remains below 1%.