Waste

Runtime safety filters for learned manipulation policies typically define unsafe states as unions of object-wise keep-out regions. This representation can be unnecessarily restrictive for hazards that depend on a joint spatial relation, such as battery recycling, where a conductive payload can short a charged cell only when it approaches both terminals simultaneously. We study runtime filtering for this two-terminal hazard in LIBERO using frozen OpenVLA policies. We factor a runtime filter into three design choices: the predicate structure, its geometric margin, and the fallback action applied when a commanded action is rejected. We compare a conjunctive predicate, a conventional two-site keep-out, and a composite of the two. For each predicate, we vary its margin to obtain a frontier between task success and residual hazard. We then compare four fallback strategies at matched operating points: holding, retreat, sampled search, and a continuous-action barrier projection. Across three workcells, the three predicate families trace nearly identical safety--utility frontiers once each is evaluated over its own margin. In contrast, the fallback strategy has a substantially larger effect: holding reduces task success by up to 0.302 relative to retreat without reducing hazard, while both minimally invasive fallbacks leave substantially more residual hazard. This ordering transfers to a second policy and task suite, while retreat-based filtering remains effective under standing errors in the clearances available to the filter, although correlated error in the estimated payload size is more damaging than larger independent errors in terminal position. These results show that, for proximity-defined manipulation hazards, margin selection and fallback strategy can matter more than predicate structure in determining the safety--utility trade-off of a runtime filter.

Fresh fruits and vegetables (FFVs) are highly perishable, and cold-chain breaks contribute significantly to global food waste. While Machine Learning (ML) can enable proactive intervention, cloud-based inference faces challenges such as latency and data loss. Fog computing addresses these issues but has been tested only in simulation for FFV cold-chain temperature prediction. To the best of the authors' knowledge, this paper presents its first real-world deployment. A fog-deployed LSTM-GRU model predicted cold-room temperature using LoRaWAN sensor data collected from a South African apple cold-storage facility with induced cold-chain breaks. Running entirely on a Raspberry Pi 4 with no cloud dependency, the system generated conditional SHAP explanations only when a break is predicted. The deployed system predicts cold-room temperature with an MAE of 0.2°C at roughly 0.2 kWh per day ($\approx 0.7$ Wh per prediction). Predictions were delivered in under one second (555 ms), dominated by network and messaging rather than computation, with conditional explanations adding modest cost. SHAP consumes 28% more CPU but is well within the hardware's capacity. The model attributes its predictions primarily to temperature, humidity, and their interaction. Critically, the deployment surfaced what simulation cannot: a sensor-triggered single point of failure, alongside genuine resilience, autonomous recovery from infrastructure faults and continued operation through internet loss. These are the first published deployment benchmarks for fog-based temperature prediction in FFV cold chains, establishing that explainable temperature forecasting is feasible on resource-constrained edge hardware. Future work includes asynchronous sensor fusion, commercial cold chain deployment, alternative model architectures, and causal analysis.

Food waste in the restaurant sector poses a substantial challenge to environmental sustainability and economic efficiency. This paper presents an exploratory machine learning framework for estimating daily restaurant food waste quantities from operational and contextual features. A structured dataset was constructed by integrating restaurant demand records, meteorological data and temporal event indicators, yielding 77,980 records across 27 features. Because large-scale ground-truth food waste measurements are not publicly available, the target variable was derived from operationally justified assumptions, with the complete construction formula and controlled stochastic variability disclosed for full reproducibility. Four supervised regression models, namely Linear Regression, Decision Tree, Random Forest and Gradient Boosting, were evaluated under a chronological 70-30 train-test split that respects the temporal ordering of restaurant operations, augmented by 5-fold time-series cross-validation. All reported metrics are explicitly scoped to performance against the constructed target and do not imply validation against measured food waste. Ensemble methods consistently outperformed linear baselines. Random Forest attained an MAE of 6.19 kg, RMSE of 8.36 kg and $R^2$ of 0.817 on the realistic feature subset following systematic exclusion of algebraically leakage-prone variables. Feature importance analysis identified menu diversity, operational area and temporal activity patterns as the primary predictive drivers. The full dataset, target construction formula, codebase and experimental configurations are publicly released to support reproducibility and future extension to empirically measured waste data.

Obtaining labeled data for semantic segmentation in applied settings (e.g., autonomous driving, industrial waste sorting) is expensive and often infeasible at scale. We present a cross-modal pseudo-labeling pipeline that enables unsupervised domain adaptation without any target-domain annotations. The pipeline is built on two core foundation models: SAM generates class-agnostic region proposals, and EVA-CLIP assigns semantic labels based on region-text similarity, with confidence filtering ensuring that only reliable pseudo-labels are used for self-training a segmentation model. As an optional extension, BLIP provides language-grounded verification for ambiguous regions, thereby improving pseudo-label quality without altering the overall pipeline. Evaluated on two domain shifts, synthetic-to-real autonomous driving and, with a primary focus, lab-to-factory industrial waste sorting, the pipeline consistently improves over source-only baselines. Our results demonstrate that pseudo-label quality, not quantity, is a decisive factor in self-training under domain shift, and that cross-modal language grounding offers a practical path to reliable automatic annotation in deployment-critical applications.

Training large language models on limited hardware is increasingly a scheduling problem across GPU compute, host memory, PCIe transfer, and storage bandwidth. Existing offloading systems reduce GPU residency, and MegaTrain shows that a CPU-master layer-streaming executor can train large models on a single GPU, but fixed checkpointing and placement heuristics still leave communication exposed on the critical path. We propose LazyTrain, an optimization layer over a layer-streaming executor. LazyTrain formulates checkpoint selection, activation placement, recomputation, and CPU-GPU-NVMe communication overlap as a mixed-integer scheduling problem, then executes the solved policy during training. It further couples 8-bit optimizer states with fast gradient clipping as a single Hybrid 8-bit operator: state compression reduces optimizer-state memory, while fast clipping counteracts the additional CPU-side update overhead. Across H800 experiments from Qwen2.5-3B to Qwen3.6-27B, LazyTrain improves sustained TFLOPS over matched baselines runs by approximately 1.24$\times$; RTX 3090 experiments likewise increase the maximum feasible batch size by one at each model scale. In the primary Qwen3.6-27B H800 MetaMathQA run, LazyTrain reaches 219.95 TFLOPS and 1361 tokens/s at batch size 72, peaks at 68.84,GB of GPU memory, and obtains 95.42% exact-match accuracy on the full evaluation split. The source code is available at https://github.com/DataArcTech/LazyTrain.

Thermochemical upgrading of plastic waste is a key upcycling pathway, yet the experimental literature is fragmented by heterogeneous conditions and incomplete reporting. Complete-case learning would retain only 10.99% of the curated experiments, while target imputation can introduce biased supervision. Here we develop a Physics-Calibrated, Missingness-Gated, and Load-Balanced Mixture-of-Experts (PC-MG-MoE) framework that converts structured missingness into an informative learning signal. PC-MG-MoE learns directly from partially observed experiments without target imputation, reconstructs physically consistent product distributions, accommodates cross-laboratory heterogeneity, and provides interpretable model behaviour rather than black-box prediction alone. Under stringent source-grouped validation, it achieved the lowest aggregate absolute error among the evaluated models, supporting engineering screening under cross-laboratory heterogeneity. Wet-lab experiments provide an external comparison, showing key composition-dependent trends. Implemented as an interactive web-based workflow, PC-MG-MoE enables forward screening, physics-grounded constrained inverse design, targeted experimental planning that supports reduced experimental workload and trial-and-error, and laboratory-specific adaptation with new platform-specific data. This work establishes a transferable framework for converting fragmented literature data into experimentally actionable guidance for model-guided plastic upcycling and broader thermochemical systems.

We study the problem of identifying the dominant arm in multi-armed bandits, where the objective is to find the action with the highest probability of exceeding the realized rewards of all other actions. Conventional mean-based and pairwise comparison-based algorithms often fail to identify the arm with the highest realized reward. To address this challenge, we introduce a novel dominant arm criterion and an efficient estimator with theoretical guarantees. Our approach relies on two key technical innovations: (i) a dominance score criterion that an arm beats the locally dominant over the partitioned reward space and (ii) a joint mixing and recycling mechanism coupled with a doubly robust estimator that guarantees simultaneous convergence of the empirical distribution functions for all arms. These key innovations pave a way to efficient computation of global arm dominance. Our proposed elimination algorithm identifies the best dominant arm with nearly optimal rate of sample complexity. Numerical experiments demonstrate that our algorithm consistently achieves exact recovery of the true dominant arm, outperforming existing baselines.

Two prompts can request the same code change and produce the same correct patch, yet cause a coding agent to perform radically different kinds and amounts of work. We study this effect in a preregistered benchmark spanning 4,644 valid runs, 24 deterministic coding tasks, seven reasoning models, and two real agent harnesses. The central finding is that prompt wording does not merely scale total effort; it changes where that effort is spent. Multiple approaches and deep thinking primarily inflate reasoning. Multiple approaches increases reasoning by 2.4x to 7.4x across all six open models and creates about three elaborated but discarded solution branches, while still yielding only one implemented solution and no success gain. Maximum certainty activates a different pathway: repeated verification propagates into extra test runs, tool calls, turns, latency, and context growth. Runs with high redundant verification cost 18x the clean-run median, execute 2.5x more tool calls, and take 3x longer, again without a success gradient. These mechanisms therefore have distinct cost carriers: some prompts are reasoning-heavy and token-borne, while others are tool-heavy and system-borne. Harness design amplifies both effects and changes cost per successful task by 5x to 30x in our setting. The findings survive a frozen holdout, paraphrase tests, a Kimi-K3 replication, and a first-party Claude Sonnet 5 study. In contrast, bounded-efficiency wording preserves diagnosis and final validation while avoiding the measured waste mechanisms. Prompt engineering for coding agents is therefore work design: it determines what the agent thinks through, what it executes, and when it stops.

Automated visual monitoring of urban environments is a growing Computer Vision research area, but municipal solid waste detection remains under-represented in dedicated benchmark resources. Existing waste-related datasets predominantly address individual litter detection, aerial imagery, or image-level classification, and none simultaneously provide street-level imagery, instance-level localization, and categorization of domestic waste streams within a structured municipal collection context. This paper introduces the Maltese Domestic Waste Dataset (MDWD), a street-level benchmark comprising 3,697 high-resolution images and 11,461 manually annotated instances across five domestic waste categories representative of Malta's municipal collection system. The dataset captures substantial variation in location, illumination, object scale, occlusion, and urban context. To establish reproducible baselines, a cross-architecture benchmark is conducted across multiple generations of the YOLO family and a transformer-based detector. On the test set, RF-DETR-M achieves the strongest overall performance with an mAP50 of 94.49% and an F1-score of 93.56%, whilst smaller-capacity variants maintain competitive accuracy at substantially reduced parameter counts. These results indicate that MDWD supports effective training across both compact real-time detectors and transformer-based models, establishing a benchmark for future research in vision-based municipal waste monitoring.

Large language models (LLMs) are increasingly used as technical assistants, but their competence in solid waste management (SWM) remains difficult to assess because existing benchmarks emphasize general knowledge rather than professional decisions under engineering, environmental, and policy constraints. We introduce WuYuEval, a multi-level benchmark for evaluating LLMs in SWM across foundational knowledge, domain reasoning, and expert decision-making. After quality auditing, WuYuEval contains a Foundation Module with 4,590 closed-ended multiple-choice questions across six task types and eight domain categories, together with an Expert Module with 247 scenario-based open-ended questions involving multi-objective optimization, constraint trade-offs, and system design. For expert tasks, we combine anchor-calibrated LLM-as-a-Judge scoring with Elo-based pairwise comparison. Across 33 LLMs, performance varied widely. The leading model reached 94.64% accuracy on the Foundation Module, but average accuracy still fell from 84.14% on easy questions to 42.50% on hard questions, with lower performance concentrated in calculation, experimental design, urban planning, and open-ended expert tasks. Reasoning-oriented Thinking modes improve most matched model pairs after auditing, but the gains depend on baseline capability and are not uniformly positive. These results suggest that visible deliberation helps only when it remains anchored to units, assumptions, and engineering constraints; otherwise, it may drift from decisive answer boundaries. WuYuEval therefore provides both an evaluation resource and an empirical basis for developing SWM-oriented foundation models with professional reasoning chains and explicit constraint control.

Incorrect disposal can contaminate campus recycling streams, and a bin-mounted camera could provide feedback as an item is discarded. We evaluated whether synthetic and derived images improve a YOLOv8n detector for this view. The real dataset contained 148 campus photographs: 86 for training, 31 for validation, and 31 for testing. Twelve joint-training configurations varied the amount and source of added images. We repeated seven principal settings with four matched seeds and computed bootstrap percentile intervals over those seeds. The real-only model reached a mean mAP@0.5 of 0.691 [0.665, 0.722]. Background replacement reduced the mean to 0.560 [0.499, 0.619], isolated-object images gave 0.680 [0.644, 0.724], and the full augmentation pool gave 0.487 [0.438, 0.537]. We also tested hand-and-forearm composites because every real photo showed a held object. Two cutouts in the initial composite set came from test photographs, so we discarded that experiment, rebuilt the set with training-split cutouts, and reran all four seeds. The corrected paired difference was +0.034 [-0.063, 0.199], which does not support a reliable hand-composite effect. Single-seed transfer experiments produced source-dependent rankings between joint mixing and sequential pretraining. None of the evaluated configurations exceeded the real-only baseline. The reported intervals quantify seed variation; the 31-photo test set remains too small for strong class-specific conclusions.

Efficient waste segregation is critical for sustainable urban management and environmental governance. Existing automated systems are limited by single-modality visual processing, insufficient contextual understanding, and weak regulatory alignment. To address these issues, we propose a language-guided vision-AI framework that integrates vision-language models and multimodal large language models for joint visual-linguistic reasoning. This framework implements a visual question answering paradigm aligned with India's Solid Waste Management Rules 2016. We construct a new WasteVQA dataset with 13,500 question-answer pairs across 21 waste categories. Experiments show that the BLIP-based model achieves a BLEU score of 0.8291 and a BERTScore of 0.9273, outperforming traditional CNN-based methods. This work improves source-level segregation accuracy, ensures regulatory compliance, and supports scalable deployment for municipal and citizen-facing waste management, promoting multimodal AI in sustainable urban infrastructure. The source code and dataset are available at: https://github.com/Khushkataruka/WasteAssistant

As urban waste volumes escalate and labor shortages intensify, automated waste sorting systems are becoming a necessity. However, current robotic solutions often struggle with the 3D perception and manipulation of transparent, deformable, or cluttered objects. This work introduces ROBOCYCLE, an autonomous dual-arm robotic recycling platform designed to meet the recycling standards of the Tokyo metropolitan area. Our approach integrates multi-view RGB-D perception, transformer-based instance segmentation using RF-DETR, and 6-DoF grasp planning via the Anygrasp SDK. By processing segmentated point clouds, the system generates robust candidate poses for irregular and deformable waste. The system achieved a 90.3% grasp success rate and 84.3% overall task success rate, effectively performing complex coordinated tasks such as unscrewing PET bottle caps. The proposed platform offers a scalable solution for autonomous waste management in real-world human environments.

The complexity of waste disposal regulations across European countries poses significant challenges for the residents and hinders the transition to a Circular Economy. In Germany, the proper sorting and disposal of household waste remains challenging across municipalities. Consequently, substantially reducing incorrectly disposed waste is vital for improving waste management and advancing the Circular Economy. AI-based waste sorting solutions can support residents through user-friendly tools, such as mobile applications, that guide proper waste disposal. To be effective in supporting the Circular Economy, however, these solutions must be configurable to reflect the specific waste sorting scheme of individual municipalities in Germany. In the scope of this work, an evaluation and analysis are performed of two prominent classification strategies: OvA and OvR. The research uses a dataset constructed in alignment with the waste categories and sorting scheme of the city of Goslar in Germany. Moreover, this work aims to extend beyond the overall performance by examining the behavior of OvA and OvR classification strategies in identifying samples likely to be misclassified. These classification strategies are compared by applying varying confidence thresholds to identify uncertain samples for subsequent human review. This evaluation aims to balance the number of misclassifications against the human effort required for data annotation.

Sorting a huge stream of waste accurately within a short period can be done with the support of digitalization, particularly Artificial Intelligence, instead of traditional methods. The overlap of Artificial Intelligence and Circular Economy can flourish many services in the environmental technology domain, in particular smart ewaste recycling, resulting in enabling circular smart cities. We analyse the growing need for automated ewaste recycling as an essential requirement to cope with the fast growing ewaste stream and we shed the light on the impact of Artificial Intelligence in supporting the recycling process through smart classification of devices, where the smartphone is our case study. Our study applies transfer learning as a special technique of Artificial Intelligence by finetuning the output layers of AlexNet as a pretrained model and perform the implementation on a small size dataset that contains 12 classes from 6 smartphone brands. We evaluate the performance of our model by tuning the learning rate, choosing the best optimizer, and augmenting the original dataset to avoid overfitting. We found that the optimizer of Stochastic Gradient Descent with Momentum and 3e-4 as a learning rate brings almost 98% model accuracy with generalization. Our study supports automated ewaste recycling in decreasing the error rate of ewaste sorting and investigates the advantages of applying transfer learning as the best scenario to overcome the rising challenges.

Nowadays, more and more disasters of different natures are appearing. Several disaster assessment approaches have been developed in order to identify damaged areas from aerial images. These damaged areas contain rich material that could be recycled towards several ecological purposes. In this paper, we present a lightweight approach that permits the efficient detection of recyclable material. Experimental results show the potential of the proposed approach towards localizing recyclable materials. Accordingly, we provide a rare dataset of material images that we labeled towards supporting the development of recyclable material detectors. The dataset of labeled material images is publicly available at: anonymous.

A robot's flash endurance is a non-renewable stock: every persisted write spends one of a few thousand program/erase cycles and never refills, yet no fielded robot memory system prices which memories are worth an erase cycle. We treat embodied memory as depreciating capital and price that stock with a single endurance shadow price $η$, which makes cost-minimizing placement across a RAM / on-board NVM / cloud hierarchy a threshold in a wear-augmented per-byte index. The index is cost-optimal whatever the sign of the value-write association $χ$; only when $χ> 0$ does the optimum turn non-monotone, sending a robot's most valuable memories off its flash. The pivot is thus empirical, and we measure $χ$ on real robot logs at a pre-specified gate: its sign is a property of the deployment regime -- positive on recurrent long-horizon manipulation ($\hatχ \approx +1.0 \times 10^{-3}$, replicated at full power), null on a shorter-horizon suite, and negative on non-recurrent teleoperation. Two boundaries scope the result. The endurance budget is dormant on premium 3,000-P/E TLC at datasheet prices and binding on the commodity QLC/eMMC ($\sim$1,000 P/E) that cheaper edge robots run. And where it binds, a learned wear-aware controller only ties price-based routing on task value, because realized value is tier-invariant across RAM, NVM, and cloud: the rent governs device lifetime and cost, not task performance. Whether wear-aware placement improves task value remains open -- $χ$ is measured against a value proxy, and the non-monotone optimum, while proven, is not yet observed in data.

Waste classification models have become highly accurate at sorting waste, often exceeding 95% on benchmark datasets. However, these models fail to account for contamination in recyclable waste. We present EcoBin, a two-stage deep convolutional neural network that classifies household waste by its disposal pathway and that explicitly accounts for contamination. The first stage is a base waste classifier built on an EfficientNetV2-S backbone that assigns each of the thirty waste categories in our dataset to one of four disposal pathways. The second stage is a contamination classifier that inspects any item routed toward recycling and overrides the decision to garbage when contamination is detected. Because no public dataset of contaminated recyclables exists, we synthesize one by segmenting images of clean recyclable objects with a U2-Net model and compositing realistic contamination textures onto their surfaces. The first stage achieves 87.42% test accuracy and a 96.13% pathway-adjusted accuracy. Meanwhile, the contamination stage distinguishes clean from contaminated items with a 0.99 ROC-AUC. On a test set of contaminated recyclables, the complete pipeline routes 24 of 25 items correctly, compared with only 1 of 25 for the base classifier alone. A McNemar's test confirms that the improvement contributed by the contamination stage is statistically significant (p < 0.001).

Rapid expansion of urban areas and population growth is causing an immense increase in waste production, which demands the need for efficient and automated waste management. In this scenario, automated waste recycling (AWR) using deep learning methods can assist humans in optimal waste management. Recent deep learning approaches for AWR provide promising waste segmentation performance, however, these methods rely on large backbone networks that are inefficient for AWR systems and suffer from performance deterioration in cluttered scenes. To this end, an optimal waste segmentation network is introduced which effectively utilizes the spatial domain to capture localized structural dependencies and the spectral domain to efficiently extract global contextual relationships. This cascaded design allows the network to progressively leverage both local and global representations across complementary domains to highlight the semantic information necessary for effective segmentation of various waste objects. Furthermore, auxiliary feature enhancement module (AFEM) is introduced to enhance the target objects' boundaries and blob amplification for better segmentation in cluttered scenarios. Extensive experimentation on ZeroWaste-aug, ZeroWaste-f and SpectralWaste datasets reveals the merits of the proposed method.

The use of GRPO-style algorithms has become the standard strategy for training LLM search agents under outcome-only rewards. With these algorithms, a query contributes to parameter updates only when its rollout group mixes successes and failures; all-correct (too-easy) and all-incorrect (too-hard) groups are zero-variance and waste rollout cost. Existing approaches treat zero-variance as a static property and either discard or pre-filter such groups. We hypothesize and empirically validate that queries flip between zero-variance and signal-bearing states as the policy evolves during training. Building on this intuition, we propose query recycling, which returns zero-variance groups to a mutable pool for future resampling, so that the effective training distribution co-evolves with the policy. With the proposed technique, a 1.7B parameter model trained on synthetic data can reach 66.0 average Pass@1 accross seven multi-hop QA benchmarks, matching or surpassing systems with up to 7B parameters trained on benchmark-derived supervision. Analysis of recycling patterns shows that recycled queries supply roughly three quarters of the effective batch by the end of training, with contributions split between recovery from policy improvement and policy drift.

Meta AI has recently released the Segment Anything Model (SAM), which demonstrates exceptional zero-shot image segmentation performance across various tasks with remarkable accuracy. Despite its inability to provide accurate segmentation across multiple research fields, SAM still serves as a valuable starting point for supporting the segmentation pipeline process, particularly for tasks that require extensive and senior skills annotations. This study aims to evaluate the generalization of SAM and fine-tuning SAM models using three waste segmentation datasets. Although they are captured from real scenes as SAM was pretrained on, these datasets present several challenges, including occlusions, deformable objects, transparency, and objects easily confused with backgrounds. In our findings, the fine-tuned SAM-ViT-H model outperforms the state-ofthe-art Zerowaste, and TACO datasets with a significant increase of +30 in IoU, and it closely approaches performance levels of TrashCan 1.0, with only a -1.44 difference. After evaluating these popular waste datasets, it became evident that fine-tuning SAM as a foundational model is a crucial step for providing better generalization for downstream waste segmentation tasks. Therefore, SAM should not be disregarded or wasted.

The growing volume of retired lithium-ion battery packs from electric vehicles and portable electronics calls for automated disassembly that is safe, flexible, and selective down to the individual cell. Existing robotic systems, however, mostly assume known pack poses, external fixtures, or specialised tooling, leaving fixture-free cell-level disassembly under pose uncertainty largely unsolved. This paper presents a vision-guided dual-arm pipeline that disassembles a 21-cell 18650 pack from an arbitrary initial pose using only general-purpose parallel-jaw grippers, RGB-D sensing, and a pre-trained grasp detector. Pose uncertainty is absorbed by a learn-and-filter perception stack with discrete look-and-move wrist-camera corrections, while a mid-task support transfer between the two arms extends the effective workspace without any external clamp. The pipeline achieves an 8/10 end-to-end success rate, a cell-localisation root-mean-square error of $2.4$,mm, and a mean cycle time of 6.0,minutes per pack, providing a practical, fixture-free building block for industrial battery recycling.

Reliable polymer identification is essential for ensuring the quality and safety of recycled plastics, yet conventional sorting and spectroscopic techniques often struggle to deliver robust discrimination. Terahertz (THz) spectroscopy offers a promising alternative, providing high-resolution and non-destructive measurements. In this work, we leverage THz signals to classify 12 types of polymers, including pure polymers, multilayer films, commercial blends, and biopolymers. To handle the complexity of these spectral signals, we propose the Multi-Scale Feature Attention Network (MSFAN), a novel deep learning architecture tailored for THz data. The framework integrates feature gating for signal recalibration and multi-scale parallel convolutions to capture diverse frequency patterns. These features are further refined through cross-feature attention and attention pooling, enabling the model to intrinsically highlight the most informative THz regions. MSFAN consistently outperforms state-of-the-art models, reaching a classification accuracy of 85.2%. This study demonstrates the potential of combining THz spectroscopy with deep learning techniques for effective, scalable, and interpretable polymer classification.

The development of automatic term extraction has become increasingly important in modern technology. Automatic term extraction can be found in virtually every search engine that is currently available to users. Recent advancements have provided promising results for the extraction of automatic terms; however, accurate labeling is difficult because of several factors, such as the limited number of annotated documents available for training and the complexity of extracting multi-word expressions due to shifts in the domain. In this paper, we will present a low-cost and interpretable method of automatic term extraction, developed specifically for Task A of the ATE Shared Task. This new method utilizes fine-tuning extraction strategies that can run on a small amount of computational resources. We evaluated our automated system using both type-level and micro-level measures of precision, recall, and F1-score to measure both complementary aspects of the extraction performance. According to the experimental results, our proposed approach achieves consistent and balanced performance compared to other teams. Even though the technique itself is relatively straightforward, it serves as a good starting point for low-resource models. Overall, the findings point toward the possibility of significant future advancements (in model expansion) with higher-level performance still able to retain their ability to be interpreted.

In this paper, we address the problem of detecting small, dense, and overlapping objects, a major challenge in computer vision. Our focus is on reviewing proposed methods based on deep learning supervised approaches. We provide a detailed comparison of these systems on a new dataset of more than 10k images and 120k instances, highlighting their performance, accuracy, and computational efficiency in the industrial recycling process use case. Through this comparative analysis, we identify the most reliable systems currently available and the specific challenges they are designed to tackle. Furthermore, we explore the benefits of data augmentation and synthetic images. Based on our analysis, we also propose potential future directions and innovative solutions that could enhance the effectiveness of small, dense and overlapped object detection systems. The scope of our investigations encompasses object detection, length measurement, and anomaly detection within the context of the recycling process. The anomaly detection strategy is robust against variations in image resolution and zoom levels, ensuring reliable performance in industrial applications. The repository of the proposed dataset, methods and evaluation codes can be found at: https://github.com/o-messai/SDOOD

Vision-Language Models (VLMs) excel at tasks like zero-shot classification and cross-modal retrieval by mapping images and text to a shared space, but this requires expensive end-to-end training with massive paired datasets. Current post-hoc alignment methods reduce computational costs by connecting pretrained encoders through lightweight mappings, yet still demand substantial paired data. In this work, we investigate the potential of repurposing the classification heads of pretrained vision models as semantic prototypes. The recycling of these weights, typically discarded after pretraining, unlocks two distinct capabilities: it enables zero-shot alignment by using weights as semantic anchors, and serves as a robust data augmentation strategy by mixing these prototypes with real image-text pairs. We demonstrate that integrating our approach with several state-of-the-art post-hoc alignment techniques consistently boosts accuracy in cross-modal retrieval, zero- and few-shot classification tasks.

Surface-level marine debris remains a practical bottleneck for autonomous clean-up, where small, reflective targets (e.g., aluminum cans) must be detected at distance under glare, ripples, and partial submersion. This paper presents, an ASV vision system and a new surface-can dataset. The dataset comprises ~7.3k raw images extracted from videos and annotated with bounding boxes, expanded via ten augmentation types to ~57k training/validation images spanning diverse lighting and water states. A family of detector and detector-tracker pipelines tailored to surface operations were benchmarked. Training YOLOv11 on CANSURF boosts performance 12x over generic datasets, highlighting the dataset's value. Experiments show that YOLOv11+ByteTrack yields the most stable tracks (fewer identity switches) and stronger multi-object accuracy under, while YOLOv11+SAHI increases recall on far-field cans at the cost of lower precision in full-context inputs. Given the mission profile, single-can pickup with approach and grab, YOLOv11 + SAHI proves better for detecting the maximum number of cans. No prior open dataset targets aluminum cans on water from a surface-level viewpoint; this dataset fills this gap and supports reproducible evaluation.

Autonomous surface vessels for floating-waste removal operate under varying hydrodynamics, external disturbances, and challenging water-surface perception. We present a field-validated system that combines camera-based polarimetric perception with a lightweight DRL-based controller for floating-waste detection and capture. Camera detections are converted into water-surface target points and tracked by a controller trained entirely in simulation and deployed directly on a retrofitted ASV platform. Our main contribution is a sim-to-real testing methodology that combines a two-stage simulation protocol with a perception abstraction module designed to mimic real camera behavior, enabling reproducible field trials and explicit evaluation of the sim-to-real gap. We apply this framework in matched simulation and field experiments across 14 disturbance regimes to expose failure modes and evaluate robustness. The results show centimeter-level terminal accuracy and indicate robust control performance under the evaluated perturbation regimes. The main source of degradation is insufficient actuation-model fidelity. We also demonstrate the system in a search-and-capture application using real camera detections in real-world conditions over areas of up to $450~m^2$. The study distills practical lessons for reliable transfer, including improved actuation-model fidelity, targeted domain randomization, and careful management of latency and timestamps across modules, while highlighting remaining challenges.

Managing municipal solid waste in rapidly urbanizing Sub-Saharan Africa remains challenging due to dispersed informal dumping and limited high-resolution datasets for spatial monitoring. We present an open-access deep learning model for automated detection of openly dumped dispersed solid waste via crowdsourced UAV imagery, trained and evaluated across 29 regions in 10 countries, encompassing diverse environmental contexts. A deep learning model trained on manually annotated image tiles achieved excellent performance in detecting openly dumped dispersed solid waste across all study regions. Predicted distributions reveal heterogeneous accumulation patterns, ranging from localized hotspots - often along waterways, where waste can exacerbate flood and public health risks - to more dispersed litter across urban areas. Waste accumulation is most strongly associated with population density and indicators of lack of local infrastructure access, whereas its relationship with broader measures of regional development is weaker, highlighting the importance of fine-scale data for understanding localized waste dynamics. By releasing the model, this study provides a ready-to-use tool for UAV imagery collected by municipalities and local mapping communities, enabling openly dumped dispersed solid waste monitoring without extensive technical expertise. This approach empowers local practitioners to convert UAV imagery into actionable insights, supporting targeted interventions and improved municipal solid waste management across Sub-Saharan Africa.

Large language models (LLMs) exhibit strong capabilities in short-context reasoning but degrade in performance over long conversational horizons due to context window limitations and inefficient token usage. We introduce ContextForge, a system for context recycling that maintains task-relevant information across turns by combining structured query generation, external memory retrieval, and controlled synthesis. The system enables efficient reuse of prior computation without relying on full context replay, reducing token overhead while preserving answer quality. We evaluate ContextForge using a 15-turn conversational benchmark that tests multi-turn reasoning, back-references, and domain shifts across structured healthcare queries. Compared to a baseline agent using identical underlying models, ContextForge demonstrates improved consistency and reduced token consumption, while maintaining comparable response accuracy. These results suggest that context recycling provides a practical approach for extending LLM capabilities in long-horizon tasks without requiring larger context windows or model retraining. Code and evaluation artifacts are available at https://github.com/Betanu701/ContextForge.

Municipal solid waste incineration (MSWI) converts urban waste to energy but simultaneously emits carbon dioxide, carbon monoxide and multiple regulated air pollutants whose formation is tightly coupled within a single combustion system. Controlling these emissions across a network of diverse facilities poses a fundamentally different challenge from optimising a single plant: data-driven models trained at one site capture local statistical patterns that rarely survive transfer to another, because they lack the physical constraints and regime-level structure needed to generalise. Here we show that shared emission-control relationships can be identified across heterogeneous MSWI plants when physical conservation laws, operating-regime heterogeneity and carbon-pollutant coupling are treated jointly. We develop a carbon-pollutant mixture-of-experts (CPMoE) model that routes process observations through regime-specific expert networks under conservation-based regularisation, and combine it with physics-informed transfer learning to adapt a reference model to new facilities. Across 13 plants, CPMoE predicts six major pollutants and a composite system-level risk index with source-domain R2 of 0.668-0.904 and 0.666-0.970, respectively; after transfer to 12 target plants these values remain 0.661-0.842 and 0.610-0.841. Expert-utilisation patterns show that adaptation proceeds through structured regime re-weighting rather than re-learning from scratch. Embedding the transferred model in an offline digital twin and screening candidate operating adjustments against historical process records yields consistent risk-index reductions of 3.6-6.3% with simultaneous pollutant co-reductions in 94-100% of evaluated samples. These findings suggest a practical route toward transferable, system-level decision support for carbon-pollutant co-control in heterogeneous waste-to-energy networks.

We present Marco-MoE, a suite of fully open multilingual sparse Mixture-of-Experts (MoE) models. Marco-MoE features a highly sparse design in which only around 5% of the total parameters are activated per input token. This extreme sparsity, combined with upcycling from dense models, enables efficient pre-training on 5T tokens. Our models surpass similarly-sized competitors on English and multilingual benchmarks, achieving a best-in-class performance-to-compute ratio. We further post-train these models to create Marco-MoE-\textsc{Instruct} variants, which surpass the performance of competing models possessing $3$--$14\times$ more activated parameters. Our analysis reveals that Marco-MoE learns structured expert activation patterns shared across related languages, while maintaining highly specialized utilization for linguistically isolated ones. We further show that Marco-MoE allows for scalable language expansion without the interference typical of dense models. To support the community, we disclose our full training datasets, recipes, and model weights.

Hybrid sequence models that combine efficient Transformer components with linear sequence modeling blocks are a promising alternative to pure Transformers, but most are still pretrained from scratch and therefore fail to reuse existing Transformer checkpoints. We study upcycling as a practical path to convert pretrained Transformer LLMs into hybrid architectures while preserving short-context quality and improving long-context capability. We call our solution \emph{HyLo} (HYbrid LOng-context): a long-context upcycling recipe that combines architectural adaptation with efficient Transformer blocks, Multi-Head Latent Attention (MLA), and linear blocks (Mamba2 or Gated DeltaNet), together with staged long-context training and teacher-guided distillation for stable optimization. HyLo extends usable context length by up to $32\times$ through efficient post-training and reduces KV-cache memory by more than $90\%$, enabling up to 2M-token prefill and decoding in our \texttt{vLLM} inference stack, while comparable Llama baselines run out of memory beyond 64K context. Across 1B- and 3B-scale settings (Llama- and Qwen-based variants), HyLo delivers consistently strong short- and long-context performance and significantly outperforms state-of-the-art upcycled hybrid baselines on long-context evaluations such as RULER. Notably, at similar scale, HyLo-Qwen-1.7B trained on only 10B tokens significantly outperforms JetNemotron (trained on 400B tokens) on GSM8K, Lm-Harness common sense reasoning and RULER-64K.

Climate change and resource depletion demand a shift from the dominant linear "take-make-use-dispose" paradigm of construction toward circular, low-waste practices. Material reuse offers a promising pathway by reducing raw material extraction, mitigating waste, and extending the service lifespan of carbon-sequestering materials such as timber. Realizing this potential, however, requires addressing technical and logistical challenges across both design and construction for accommodating heterogeneous, reclaimed material inventories. This paper presents an integrated framework that couples data-driven computational design with feedback-driven adaptive human-robot collaborative (co-robotic) fabrication and assembly to enable the realization of nonstandard structures made from reclaimed timber of varying length and geometries, supplemented with new off-the-shelf timber when necessary. The framework is validated through Timbrelyn, a built case-study installation that demonstrates how timber reuse can inform and enhance architectural expression. This work contributes to the development of integrated design-to-fabrication workflows that advance adaptive, feedback-driven methods to handle inventory constraints and reclaimed material uncertainties, facilitating material reuse in the design and construction of new buildings and structures.

Unrecovered e-waste represents a significant economic loss. Hard disk drives (HDDs) comprise a valuable e-waste stream necessitating robotic disassembly. Automating the disassembly of HDDs requires holistic 3D sensing, scene understanding, and fastener localization, however current methods are fragmented, lack robust 3D sensing, and lack fastener localization. We propose an autonomous vision pipeline which performs 3D sensing using a Fringe Projection Profilometry (FPP) module, with selective triggering of a depth completion module where FPP fails, and integrates this module with a lightweight, real-time instance segmentation network for scene understanding and critical component localization. By utilizing the same FPP camera-projector system for both our depth sensing and component localization modules, our depth maps and derived 3D geometry are inherently pixel-wise aligned with the segmentation masks without registration, providing an advantage over RGB-D perception systems common in industrial sensing. We optimize both our trained depth completion and instance segmentation networks for deployment-oriented inference. The proposed system achieves a box mAP@50 of 0.960 and mask mAP@50 of 0.957 for instance segmentation, while the selected depth completion configuration with the Depth Anything V2 Base backbone achieves an RMSE of 2.317 mm and MAE of 1.836 mm; the Platter Facing learned inference stack achieved a combined latency of 12.86 ms and a throughput of 77.7 Frames Per Second (FPS) on the evaluation workstation. Finally, we adopt a sim-to-real transfer learning approach to augment our physical dataset. The proposed perception pipeline provides both high-fidelity semantic and spatial data which can be valuable for downstream robotic disassembly. The synthetic dataset developed for HDD instance segmentation will be made publicly available.

Rapid urbanization and continuous population growth have made municipal solid waste management increasingly challenging. These challenges highlight the need for smarter and automated waste management solutions. This paper presents the design and evaluation of an integrated waste management framework that combines two connected systems, a robotic waste segregation module and an optimized bio-digestor. The robotic waste segregation system uses a MyCobot 280 Jetson Nano robotic arm along with YOLOv8 object detection and robot operating system (ROS)-based path planning to identify and sort waste in real time. It classifies waste into four different categories with high precision, reducing the need for manual intervention. After segregation, the biodegradable waste is transferred to a bio-digestor system equipped with multiple sensors. These sensors continuously monitor key parameters, including temperature, pH, pressure, and motor revolutions per minute. The Particle Swarm Optimization (PSO) algorithm, combined with a regression model, is used to dynamically adjust system parameters. This intelligent optimization approach ensures stable operation and maximizes digestion efficiency under varying environmental conditions. System testing under dynamic conditions demonstrates a sorting accuracy of 98% along with highly efficient biological conversion. The proposed framework offers a scalable, intelligent, and practical solution for modern waste management, making it suitable for both residential and industrial applications.

Litter pollution represents a growing environmental problem affecting natural and urban ecosystems worldwide. Waste discarded in public spaces often accumulates in areas that are difficult to access, such as uneven terrains, coastal environments, parks, and roadside vegetation. Over time, these materials degrade and release harmful substances, including toxic chemicals and microplastics, which can contaminate soil and water and pose serious threats to wildlife and human health. Despite increasing awareness of the problem, litter collection is still largely performed manually by human operators, making large-scale cleanup operations labor-intensive, time-consuming, and costly. Robotic solutions have the potential to support and partially automate environmental cleanup tasks. In this work, we present a quadruped robotic system designed for autonomous litter collection in challenging outdoor scenarios. The robot combines the mobility advantages of legged locomotion with a manipulation system consisting of a robotic arm and an onboard litter container. This configuration enables the robot to detect, grasp, and store litter items while navigating through uneven terrains. The proposed system aims to demonstrate the feasibility of integrating perception, locomotion, and manipulation on a legged robotic platform for environmental cleanup tasks. Experimental evaluations conducted in outdoor scenarios highlight the effectiveness of the approach and its potential for assisting large-scale litter removal operations in environments that are difficult to reach with traditional robotic platforms. The code associated with this work can be found at: https://github.com/iit-DLSLab/trash-collection-isaaclab.

We present StreamDEQ, a method that aims to infer frame-wise representations on videos with minimal per-frame computation. Conventional deep networks perform feature extraction from scratch at each frame in the absence of ad-hoc solutions. We instead aim to build streaming recognition models that can natively exploit temporal smoothness between consecutive video frames. We observe that the recently emerging implicit layer models provide a convenient foundation to construct such models, as they define representations as the fixed points of shallow networks, which need to be estimated using iterative methods. Our main insight is to distribute the inference iterations over the temporal axis by using the most recent representation as a starting point at each frame. This scheme effectively recycles the recent inference computations and greatly reduces the required processing time. Through extensive experimental analysis, we show that StreamDEQ is able to recover near-optimal representations within a few frames and maintain an up-to-date representation throughout the video duration. Our experiments on video semantic segmentation, video object detection, and human pose estimation in videos show that StreamDEQ achieves on-par accuracy with the baseline while providing 2-4x higher throughput.