Robot Locomotion

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

Flow-based policies provide an expressive framework for continuous robot control, but their iterative ODE integration incurs substantial inference cost. Naively reducing the integration budget can severely degrade control, since policies optimized under full-step execution are not explicitly constrained to remain reliable under coarse numerical integration. We refer to this mismatch as the few-step discretization gap. To address this problem, we introduce RFPO, a flow-policy optimization framework for reliable few-step execution. Reward-aware online Reflow rectifies student-induced transport paths during on-policy learning, making the resulting policy more robust to coarse integration. A frozen Gaussian PPO controller supplies complementary action-space supervision at full and intermediate integration budgets, while the deployed policy remains a single flow student executed with one Euler step. Across Unitree Go2, Boston Dynamics Spot, Unitree H1, and Unitree G1, RFPO consistently preserves full-step control performance under one-step execution, with one-step returns remaining within 2.4% of their corresponding 64-step values across both zero and random initialization. On Unitree Go2, one-step execution retains 98.5% of the 64-step reward while reducing onboard mean inference latency from 4.39 ms to 0.08 ms, yielding a 54.9x speedup. Real-robot experiments further validate stable one-step locomotion. Code: https://github.com/AIGeeksGroup/RFPO. Website: https://aigeeksgroup.github.io/RFPO.

This paper presents an open-sourced MATLAB simulation and analysis platform dedicated to legged climbing robots. This simulator enables the design of any limbed robotic system as an articulated multi-body with a floating base and simulates it walking and climbing in an arbitrary environment. The main variable environmental parameters are inclination, gravity, and ground stiffness, and any point cloud can be installed as the terrain map. Furthermore, the simulator employs a rigid body dynamics engine. This paper first describes the simulator structure, and the computational flow and next presents the representative simulation examples where quadrupedal robots assumed gripping on the wall or climbing on the steep slope.

Robot co-design couples morphology search with policy learning, yet training every new design from scratch discards acquired control experience. We present LACE-CRAFT, which compares continued learning on the current robot with policy adaptation to new morphology-reward pairs. LACE resumes the incumbent's full learning state and initializes compatible challengers with its actor parameters and observation statistics. A fixed task metric selects among both branches and the frozen incumbent. CRAFT coordinates Feedback, Morphology, Reward, and Integration roles through shared experimental records and behavioral replays to generate and cross-review paired proposals. A generative extension converts generated meshes into editable articulated models with configured joints, actuator interfaces, and consistently updated simulation assets. Across five locomotion benchmarks, mean scores over three evaluation seeds are 6.4-91.9% higher than D2C. Both methods train 30 new morphology-reward pairs over five rounds; LACE additionally uses four continuation training units. Five-task ablations examine policy inheritance and replay-derived feedback. A fabricated prototype demonstrates indoor walking and illustrates the geometry-to-hardware workflow.

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

Quadruped robots are increasingly expected to carry objects while moving through human environments. But what happens when a person interacts directly with the payload rather than with the robot? If the payload is unrestrained, the robot must distinguish intentional external interactions from ordinary payload motion, while still keeping the load balanced and maintaining stable locomotion. How can a quadruped infer and compliantly respond to such interactions using only onboard measurements? In this work, we develop a force-aware locomotion framework that treats payload interactions as commands that shape the motion of the combined robot-payload system. Our approach separates the learning of force-aware locomotion and force estimation on an unrestrained payload. We combine a compliant load-carrying policy with a causal force estimator, trained through estimator-in-the-loop data aggregation and finetuning, to predict interactions from onboard robot measurements. Our simulations and real-world experiments show that the resulting controller can maintain stable payload-carrying locomotion, yield compliantly to external interactions, and use the inferred force to support human-guided changes in the robot's trajectory.

A bipedal robot cannot deviate from its path to avoid an obstacle without disturbing its balance, and this coupling is most severe on underactuated platforms such as the biped considered here, which has four actuated joints per leg and no hip or ankle roll. This paper presents a Hierarchical Reinforcement Learning (HRL) framework in which a High-Level (HL) policy observes the robot pose, 36 raycast proximity measurements, moving-obstacle states, and a receding-horizon local goal, and outputs a body-velocity command $(v_x, v_y, ω_{yaw})$ every ten control steps, while a velocity-conditioned Low-Level (LL) policy tracks each command through PD-controlled joint targets. Both policies are trained jointly with Soft Actor-Critic (SAC). Because the converged gait is task-agnostic, it is frozen and driven by classical planners over the same command interface, yielding three controlled baselines: SAC+A*, SAC+RRT*, and SAC+APF. Across 100 evaluation trials per method in randomized PyBullet environments, the proposed method reaches the goal in 98.0% of static and 88.0% of dynamic trials, against at most 78.0% and 68.0% for the planner hybrids, with path lengths within 4% of the A* reference, and ablations confirm that each observation channel and reward term contributes materially to this performance.

High-precision locomotion combines motion-command tracking with precise regulation of task-relevant physical states, enabling robots to interact reliably with their surroundings during motion. Joint end-to-end optimization can leave precision objectives insufficiently optimized, while reactive residual control adjusts actions only after deviations become observable. We present \textbf{LocoWM}, a world-model-guided preactive residual adaptation framework for high-precision locomotion. A base policy provides command-following locomotion, while an action-conditioned world model predicts a sequence of future physical states from proprioceptive history and the proposed base action. A residual adapter conditions on this predicted sequence to generate additive action corrections that compensate for anticipated deviations. Two-stage training first learns locomotion and action-conditioned dynamics, then freezes both modules while training the adapter, separating locomotion acquisition from precision adaptation. Experiments spanning terrain leveling, acceleration compensation, and push recovery demonstrate improved control precision and disturbance robustness over end-to-end and reactive residual baselines. Demos and code are available at: https://zhaozijie2022.github.io/LocoWM

We present Video2SwimFish, an automated pipeline and benchmark for building controllable fish assets from real-fish videos for underwater embodied AI. Given synchronized multi-view videos of an individual fish, the pipeline reconstructs a metrically scaled deformable mesh from a VLM-selected canonical frame, generates internal articulation adapted to that individual's morphology through a VLM actor-critic loop, and extracts a Biological Locomotion Manifold (BLM) from the fish's observed midline curvature. The BLM provides a low-dimensional action space bounded by real-fish motion, enabling an individual swimming policy to be learned for each reconstructed fish. We release two paired datasets: synchronized top- and front-view recordings of 120 individual fish across 6 species, and the controllable assets and individual swimming policies derived from them. Because every asset is tied to the animal it came from, the dataset supports a benchmark that evaluates locomotion learning not only on task success but on fidelity to that individual in trajectory shape, body curvature, and tail-beat frequency, across trajectory following, reward-free swimming behavior transfer from video, and a downstream case study in which a simulated BlueROV underwater robot captures one of the assets. We find that task success and locomotion fidelity do not necessarily improve together: the method achieving the highest task completion is not the method achieving the highest locomotion fidelity, and we identify faithful reproduction of individual animal locomotion as an open challenge for the community. Project website: https://hangongchen.github.io/video2swimfish-web/.

GPT-6 Astra exhibits a remarkable ability to generate numerical robot actions, extending its role beyond high-level planning. To assess Astra's capabilities as general-purpose embodied policies, we conduct comprehensive evaluations across six domains, examining direct control, cooperation with learned policies, and feedback-driven adaptation. In gripper manipulation, Astra can correct task targets and prepare contact conditions for subsequent policy execution; hybrid control with π0.5 achieves 48% success on the evaluated RoboDojo subset. In dexterous manipulation, hybrid control achieves 50% success in ten experience-guided DexJoCo trials, while direct in-hand control struggles to coordinate finger contacts. In mobile manipulation, hybrid control reaches 38.7% success on the evaluated RoboCasa365. In navigation, Astra leads our local comparisons, reaching 92% success on RxR instruction following and 82% on HM3D object search, although search incurs substantial detours. In locomotion, dense motion-reference generation remains unreliable: none of five sequential attempts on a single obstacle course reaches the goal, despite improvements in stability and forward progress. In humanoid loco-manipulation, Astra exceeds baseline methods on 13 of 30 HumanoidBench tasks with pretrained whole-body controllers. These findings reveal a gap between useful task decisions and reliable physical control. Inference latency further constrains practical control: across 50 RoboDojo instances per condition, policy-assisted and direct control consume 624.8 million and 1.132 billion tokens. A 30-second locomotion run requires 250 model calls averaging 39.86 seconds each, with physics paused during inference.

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

Robot-aided operations in space stations are essential for reducing the workload of astronauts and improving the efficiency of on-orbit activities. Multi-limbed intra-vehicular robots (MLIVRs) equipped with grappling end-effectors have emerged as a promising solution, as they can securely grasp pre-existing interfaces, such as handrails and seat tracks, thereby enabling stable locomotion and forceful manipulation in microgravity environments. Since graspable locations on these interfaces are spatially limited and discretely distributed, motion planning for MLIVRs must be addressed jointly with foothold planning. This paper presents a simultaneous path and foothold planning framework based on graph theory for MLIVRs. The proposed method efficiently searches for feasible stance sequences for a multi-limbed robot while satisfying manipulability constraints. The effectiveness of the proposed framework is validated through simulations in a 3D model of the International Space Station (ISS) cabin, demonstrating its capability to generate feasible and efficient locomotion plans in realistic intra-vehicular environments.

Obstacle-aided locomotion is a fundamental capability for snake robots to traverse complex environments. However, conventional rigid-link snake robots often suffer from stagnation or jamming caused by their low joint density (i.e., the number of joints per unit length). This results in discontinuous contact with obstacles, unlike the continuous adaptation of biological snakes. To investigate the effect of joint density on obstacle-aided locomotion performance, we utilized a joint-repositionable snake robot mechanism that decouples actuators from joints, enabling a high-density architecture. We developed two experimental models with identical total lengths but different joint densities (high-density and low-density) and conducted comparative propulsion experiments in obstacle environments with varying obstacle diameters. The experimental results demonstrate that the high-density model substantially suppresses the abrupt shifts in reaction forces that cause stagnation in the low-density model. By maintaining smooth contact points, the high-density configuration reduces power consumption and achieves stable, continuous propulsion. These results highlight high joint density as a key factor in improving the environmental adaptability of snake robots in complex terrains.

Humanoid parkour policies can traverse various terrains, but task completion may mask challenges of harsh landings, edge contacts, and unstable stance contacts. Humans naturally regulate foot-terrain interaction through tactile feedback, modulating contact compliance according to terrain stiffness. This highlights a key domain gap between humans and humanoid robots: the absence of rich tactile sensing in most humanoid systems. We address this problem with TactileStep, a deployable tactile learning framework that brings sole pressure sensing into humanoid locomotion control for softer touchdowns and more stable support. TactileStep aligns tactile simulation with the real pressure insole, allowing the policy to learn from the same contact features available on hardware. During training, we use tactile and motion cues to recognize different foot-contact phases and apply phase-aware rewards that encourage safer landing and more stable stance. Evaluated in simulation and on a Unitree G1 humanoid across diverse terrains, TactileStep reduces peak touchdown force by up to 48.8% and peak A-weighted impact noise by up to 30.1 dB over a strong perceptive baseline, while increasing stance contact area by up to 23.8%.

Robotic bodies are inherently distributed in sensing and actuation, yet learning-based control still commonly relies on centralized information processing. This work studies the problem of information organization in communication-constrained embodied control: which computations should remain local, and which information is worth transmitting for whole-body coordination. We propose FlyCNS, an embodied information-organization framework inspired by the Drosophila brain--nerve-cord connectome. FlyCNS preserves local sensorimotor computation within each limb and enables selective long-range communication through separate ascending and descending routing pathways. From a real connectome, FlyCNS extracts the directional structural complexity of these two pathway types and uses it as a weak prior over communication allocation, while message content, transmission timing, and locomotion policies remain task-adaptive and are learned through reinforcement learning. In Unitree Go1 simulation, FlyCNS exhibits more graceful performance degradation as the communication budget is tightened. Under the most restrictive setting, it uses only about 21--22% of the communication of the full-communication reference, while still maintaining a tracking score of approximately 0.882 under both command protocols, with a gap of no more than 6.1% from the full-communication reference. These results indicate that real neural connectomes can inform not only the structural design of control networks, but also provide transferable inductive biases for information organization across embodiments, guiding robots in balancing local computation and long-range coordination under limited communication resources.

Depth-conditioned locomotion policies have demonstrated impressive agile maneuvers, but can be steered to unpredictable actions when observations are outside their training distribution. Occlusion, invalid returns, sensor noise, and visual distractors can shift deployment observations away from nominal simulated depth. While synthetic sensor augmentation targets specified degradations, it does not by itself define behavior under corruption families omitted from training. To address gaps in training-time coverage, we present REDACT (Retaining Evidence Despite Artifacts for Continued Traversal), a teacher-student framework combining an improved visual encoder architecture, persistent feature masking, and a novel consensus-gating algorithm to retain useful depth information under unmodeled corruption. The gate uses approximate conformal calibration on clean observations alone, requiring no prior knowledge of the corruption type. Trained on clean simulated depth, REDACT retains useful visual information under unseen corruption, supporting higher traversal success than existing parkour baselines. Evaluation of depth augmentation across corruption families further shows that REDACT improves robustness where augmentation coverage is missing. Real-world trials demonstrate zero-shot transfer to structured and forested environments with unfamiliar scene content.

Humanoid locomotion over complex terrain requires anticipating footholds that may no longer be visible at touchdown. Limited camera coverage and self-occlusion make it necessary to retrieve relevant terrain information from earlier observations. We present FootQuery, a perceptive locomotion framework that queries depth history using each foot's predicted next touchdown. The policy predicts touchdown locations and uncertainty from proprioception and uses these distributions, together with per-foot features, to query sparsely sampled historical depth frames. During training, realized contacts are projected into historical images to supervise retrieval at the regions where those contacts were visible. The retrieved per-foot features are fused with global visual memory to generate control actions. A progressive force-assistance curriculum supports early exploration, while event-consistent tread-midline shaping encourages coordinated stair contacts. Deployment requires only proprioception and onboard depth images. In simulation, the complete framework outperforms its component ablations on the most challenging tested stairs, gaps, and platforms. Real-world experiments on a Unitree G1 demonstrate continuous traversal with a single policy across outdoor stairs and indoor routes combining stair ascent and descent, platforms, and gaps. These results support organizing visual history around anticipated contacts for perceptive humanoid locomotion.

Low-friction surfaces challenge bipedal locomotion by limiting the contact forces available during stepping. Inspired by penguin waddling, we investigate how lateral torso motion and center of mass (COM) placement affect locomotion as surface friction changes. Using a five-actuator biped, we compare an upright-gait strategy with a penguin-inspired torso-over-stance-leg strategy across multiple COM placements in simulation and hardware. In the 3-D simulator MuJoCo, we sweep through sinusoidal leg and hip actuation parameters across four friction coefficients mu = 0.1, 0.3, 0.5, 0.7. In simulation, torso-over-stance-leg motion produces more successful controllers and higher forward speeds at low friction, with the highest speed occurring for the high-COM configuration. Hardware experiments show the same low-friction speed trend: at mu=0.12, torso-over-stance-leg motion increases forward speed and reduces cost of transport at both tested COM ratios, and the higher COM also improves both measures. The high-COM penguin configuration is the fastest and most energy efficient while maintaining low sideways foot motion. At mu=0.45, the COM trend reverses: the lower-COM configurations are faster and more energy efficient, while gait strategy has little effect on forward speed but still changes sideways foot motion. These results show that the effects of lateral torso motion and COM placement depend on the available friction, and that forward speed, energy use, and slip-related foot motion can be modulated with a penguin-inspired torso motion on hardware.

Learning visual policies for locomotion and manipulation requires coordinating contact with the environment and can incur substantial computation and GPU memory costs. First-order policy gradients (FoPG) reduce training cost through differentiable simulation, but local optimization can converge to unintended contact patterns. To address this shortfall, we propose Sampling-Guided Policy Search (SGPS), which couples recurring action-target refinement by sampling-based model-predictive control with first-order policy optimization. Behavior cloning initializes the policy from sampled actions; training then alternates sampling-based refinement with short-horizon FoPG updates under perturbed initial states and randomized dynamics. For visual policy training, we use a decoupled FoPG formulation that excludes rendering from the computation graph, enabling direct learning from depth observations without a state-policy teacher. On a single GPU, SGPS learns policies for locomotion, obstacle traversal, crate pushing, and bimanual carrying on simulated Unitree Go2 and G1 robots. Our experiments further show that refinement improves policy learning beyond initialization and tracking alone. For hardware deployment, the distilled policy transfers zero-shot to a real Go2 and uses onboard depth to autonomously trot, crawl, clear hurdles, and switch between these behaviors.

Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.

Generalized morphology control requires a single policy to transform information across limbs with different physical roles, coordinate whole-body motion, and remain efficient as body size grows. Existing communication mechanisms address these requirements only partially. We introduce RecMorph, a topology-guided spatial recurrent architecture that uses recurrent sequence computation to jointly perform cross-limb communication and representation transformation. A depth-first traversal converts the kinematic tree into a morphology-derived sequence, along which shared bidirectional transitions progressively transform limb information before action decoding. Residual preservation, RMS normalization, and input-dependent channel modulation stabilize this repeated spatial transformation, yielding linear token complexity at fixed model width and depth. Across five UNIMAL tasks, RecMorph achieves the strongest mean final training performance among the evaluated generalized morphology controllers and the highest measured inference throughput on FT, while generalizing to unseen variations and bodies with up to 30 limbs. We further migrate representative generalized controllers from UNIMAL benchmarks to a four-platform quadruped setting. RecMorph achieves the best macro-averaged performance under nominal and high friction, reduces nominal velocity RMSE by 43.5% relative to specialist MLPs, and one shared policy completes 40 physical Go1/Go2 trials without falls. These results show that topology-guided recurrent transformation provides an effective and efficient communication mechanism for Generalized Morphology Control and remains effective when transferred from procedural bodies to physical robot platforms. Code and experimental resources are publicly available at https://github.com/quanruirao/RecMorph.

A3P5 NEMESIS is a four-wheel rover intended to combine remote inspection, environmental observation and lightweight manipulation within one serviceable platform. This study develops a photo-constrained geometric reconstruction, a subsystem architecture and a reproducible analytical assessment while distinguishing physical prototype evidence from proposed functions. An exploratory search retrieved 5,000 bibliographic records across ten queries, yielding 4,897 distinct DOI records and 1,212 metadata candidates; selected primary studies and technical documents informed the design. The reconstructed configuration retains the carbon-pattern enclosure, independently steered wheel assemblies, folded manipulator, inclined camera mast and side sampling equipment. A declared 24 kg scenario predicts 3.28 newton-metres of gearbox-output torque per wheel on a 20-degree grade under equal load sharing; a separate static model shows how a 2 kg forward payload reduces the geometric front-tipping bound from 38.1 degrees to 32.7 degrees. These are design screens, not measured operating limits. A public-data calibration benchmark uses 7,344 eligible hourly observations, eight sensor/environmental predictors and chronological training, validation and test partitions. Validation-selected ridge regression achieves a held-out CO root-mean-square error of 0.502 milligrams per cubic metre, with a 95% daily-block bootstrap interval of 0.435-0.569 milligrams per cubic metre. This result concerns an external sensor array and cannot establish NEMESIS accuracy. The combined analysis identifies priority measurements, proposed control interfaces and mission-specific validation requirements. The contribution is a traceable engineering design study and evaluation framework for a prototype whose integrated field performance remains to be established.

Legged robots offer a variety of automation applications in real-world scenarios. But areas that are difficult to traverse, like slopes, caves, or scaffolding, still pose a great challenge for traversal. To tackle this problem, we propose an optimized algorithm for evaluating the full actuatable wrench polytope for arbitrary contact scenarios. With our improved analysis algorithm, the torques for each joint of the robot can be calculated within a control frequency of 49 Hz. The achieved speedup allows for deployment within a regular control loop for actuating robot poses for different contact scenarios. We evaluated our stability controller extensively in simulation scenarios and validated its applicability by deploying it on actual walking robot hardware. The proposed controller achieved stability in very complex scenarios that are currently not achievable by any other controller.

A walking robotic hand must use the same fingers to move its body, support its weight, and interact with the environment. We show how an anthropomorphic hand can learn these skills while retaining its finger design and position controller. Onboard power and computation make the platform self-contained. Our reinforcement learning approach accounts for the hand's unequal fingers, with training in a simulator calibrated from hardware measurements. In simulation, the hand moves faster with our reward formulation than with tuned rewards originally designed for quadrupeds. On hardware, task-specific policies enable untethered crawling, steering, and fall recovery. While supporting its own weight, the hand also executes successive keyboard commands without vision and pushes an object to targets using overhead visual feedback. These results demonstrate a compact mobile manipulator that reuses its fingers for locomotion and interaction, without a separate locomotion mechanism.

State-of-the-art visual locomotion controllers are increasingly capable at handling complex visual environments, making evaluating their real-world performance before deployment increasingly difficult. This work intends to narrow this train/evaluation gap by developing a collection of hyper-photo-realistic, closed-loop evaluation environments - The Neverwhere Benchmark Suite - comprised of over sixty 3D Gaussian Splatting reconstructions of urban indoor and outdoor scenes. Our goal is to encourage large-scale and reproducible robot evaluation by making it easier to create and integrate Gaussian splats-based reconstructions into simulated continuous testing setups. We also underscore the potential pitfalls of relying exclusively on 3D Gaussian-generated data for training, by providing policy checkpoints trained over multiple Neverwhere scenes and their performance when evaluated in novel scenes. Our analysis illustrates the necessity of sourcing diverse data to ensure performance. Code and data are available on the project page: https://ziyc.github.io/neverwhere-bench/.

Light detection and ranging (LiDAR) remains less explored than RGB-D sensing for perceptive legged locomotion, and existing LiDAR-based approaches often rely on explicit mapping. We present JEPLO (Joint-Embedding Predictive learning for legged LOcomotion), a single-stage learning framework for mapping-free, LiDAR-based perceptive locomotion for legged robots. We introduce a proprio-exteroceptive JEPA (PE-JEPA) world model to learn predictive egocentric terrain representations from onboard observations, including raw LiDAR scans. A concurrent JEPA-teacher-student (CJTS) pipeline is further proposed to train a locomotion policy informed by JEPA latent representations in simulation using deep reinforcement learning with a simple reward formulation. The framework achieves successful sim-to-real transfer, enabling omnidirectional traversal of diverse terrains, including long staircases and high boxes, with lightweight onboard computation. Evaluations demonstrate greater robustness than existing perceptive locomotion frameworks, particularly under degraded perception caused by occlusion, sparsity and noise. Further analysis validates JEPLO's ability to retain task-relevant information under these challenging conditions. We open-source our implementation, experimental datasets, and hardware setup designs https://github.com/ASIG-X/JEPLO.

Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

Animals coordinate their movements through distributed neural circuits, but soft robots still typically depend on external, centralized electronics for control. Building soft robots that operate without centralized electronic controllers while remaining responsive to their environment remains a frontier challenge in soft robotics. In this work we introduce a soft-robot control architecture inspired by leaky integrate-and-fire models of biological neural circuits. The Pneumatic neuron (Pneu-ron) is a soft actuator that unifies energy conversion, logic, and actuation in one component. Each module combines a low-boiling-point fluid (LBF), a heater, and a mechanical switch into a self-excitable unit. Boiling the LBF inflates the module and triggers excitation and inhibition of adjacent modules in a process we call "inflate-and-fire". When interconnected into excitatory-inhibitory rings, Pneu-rons generate stable, sequential oscillations whose frequency emerges from the material dynamics and environmental conditions. By harnessing the inflation of Pneu-rons for actuation these networks can drive oscillatory locomotion of soft robots. Pneu-ron networks sustain oscillation under mechanical load and thermal variations, adapting through material physics rather than computation. Dynamical modeling of these networks reveals a dimensionless bifurcation diagram that dictates the network's oscillatory behavior. Encoding logic and actuation into material-level modules presents a new avenue for adaptive, electronics controller-free, soft robots.

This paper presents a novel approach to hexapod locomotion by evolving each leg's gait independently through a decentralized evolutionary algorithm. Using the Webots simulator and the Mantis hexapod robot, we optimize individual leg controllers without centralized coordination, allowing emergent behaviors to drive the development of efficient, coordinated locomotion. Our decentralized method is benchmarked against cooperative coevolution, demonstrating improved efficacy in generating stable and adaptive gaits while showing interesting emergent coordination. By enabling independent evolution of leg controllers, this method reduces the complexity of gait optimization and highlights the potential of decentralized strategies for scalable and adaptive robotic systems.