Generative Super-Resolution

Subspace methods such as multiple signal classification (MUSIC) achieve super-resolution direction of arrival (DoA) estimation by exploiting the orthogonality between the array manifold and the noise subspace of the measurements. Their accuracy therefore depends on the assumed manifold and degrades under model mismatch, while parameters not identifiable from the spatial manifold cannot be recovered. In this work, we propose the conditional neural manifold (CNM), which replaces the fixed manifold with an observation-conditioned mapping from source parameters to steering vectors. An encoder maps the snapshots to a latent scene representation that conditions a zero-initialized neural field over the parameter space. The manifold is learned without steering-vector supervision by shaping the resulting MUSIC landscape. Since the correction acts on the manifold rather than on the estimator, it can be used by other manifold-based methods without modification. The CNM restores resolution under array imperfections, colored noise, correlated sources, and near-field propagation, and resolves the angle-frequency ambiguity inherent to the nominal spatial manifold.

Benefiting from the powerful generative priors of diffusion models, diffusion-based real-world image super-resolution (Real-ISR) methods have demonstrated impressive performance.To achieve efficient Real-ISR, several recent works have designed one-step diffusion-based models.Howerver, unmediatedly feeding LR into a diffusion model creates a distributional gap with the model's original input.A straightforward approach to reduce the distribution gap is to introduce noise to the LR latents. However, directly adding noise inevitably corrupts the content of the LR images.In this study, we propose DNF-SR, a Dual-input and Negative-aware Feature fine-tuning method for Real-ISR.Specifically, we use a dual-input strategy that concatenates the original LR image with the noisy LR input and feeds them into a diffusion-based image editing model, ensuring both high-fidelity one-step super-resolution and improved perceptual and content consistency.Additionally, the noise present in the noisy LR input introduces randomness and diversity into the outputs. We exploit this property and propose a post-training optimization method, Negative-aware Feature Fine-Tuning (NF2T), which guides the model toward producing higher-quality results.NF^2T classifies multiple outputs into positive and negative subsets and then defines implicit policy improvement directions in both the image and feature spaces, thereby further enhancing the stability of the optimization.Extensive experiments show that DNF-SR outperforms other methods.Code will be released.

High-resolution digital surface models (DSMs) play an important role in urban analysis, 3D building reconstruction, and infrastructure monitoring, yet their availability remains limited due to the high cost and complexity of data acquisition. In contrast, coarse DSMs from commercial satellite missions are widely accessible, and high-resolution optical imagery is increasingly available from aerial and satellite platforms. We address the resulting mismatch in spatial resolution and propose a DSM superresolution approach that enhances 5 m DSMs to 0.5 m resolution, using guidance from high-resolution spectral images. Our method employs denoising diffusion to transfer information that is visible only in the image, like crisp outlines and detailed roof structures, into the elevation maps. In this way, surface details are reconstructed more accurately than with conventional interpolation or filtering techniques. Experiments on several cities in Central Europe demonstrate that the proposed approach produces high-quality DSMs with improved structural detail and accurate surface geometry. Our results highlight the potential of guided super-resolution with foundational image priors as a means of reconstructing high-resolution surface models.

Compact snapshot hyperspectral cameras provide rich instantaneous spectral measurements for ground-level machine vision, but at lower spatial resolution than standard RGB cameras. RGB-guided hyperspectral super-resolution (HSR) addresses this limitation by transferring spatial detail from a high-resolution RGB guide to a low-resolution hyperspectral image (HSI). These dual-camera systems are typically in a horizontal rig geometry, requiring cross-camera image alignment due to different fields of view. However, residual misregistration can inject spurious high-frequency details. Existing learned unaligned-fusion methods are usually trained for a fixed spectral support and spatial scale factors and can be computationally demanding, limiting their flexibility across sensors. We propose a lightweight and interpretable RGB-guided HSR framework combining cross-modal flow alignment with model-based Gram-Schmidt orthogonalization fusion. The method first warps the RGB guide onto the HSI grid, then estimates an energy-based confidence weight map by measuring local alignment reliability. This map is then used both in a weighted least-squares spectral regression and in a gated fusion between the super-resolved estimate and an HSI-preserving estimate. Unlike existing learned methods, the proposed framework has a low computational footprint and supports VIS-NIR spectral supports and scale factors without retraining. Experiments on the Real benchmark show that the proposed method improves reconstruction accuracy over learned fusion baselines while remaining substantially faster. On a 34-frame sequence acquired with our real RGB-HSI dual-camera setup, a reduced-resolution quantitative evaluation validates the method under genuine cross-sensor radiometric, noise, and geometric differences, while native-resolution qualitative results demonstrate deployment on the full 51-band VIS-NIR acquisition.

Real-world image super-resolution (Real-ISR) aims to preserve structures supported by the degraded observation while reconstructing perceptually realistic details. However, existing Real-ISR methods largely optimize fidelity and perceptual quality within a shared network, causing the two objectives to interfere throughout training and making their balance difficult to control. Recent one-step methods reduce sampling steps, yet often inherit both this coupled optimization behavior and the expensive high-resolution backbone of their multi-step predecessors. We argue that efficient Real-ISR requires not only a shorter sampling trajectory, but also specialized modeling of faithful reconstruction and perceptual detail synthesis. Based on this insight, we propose PixelIR, a fidelity-perception decoupling framework built upon pixel-space image-residual flow matching. PixelIR first learns an image flow that maps the degraded observation to a faithful reconstruction. Then, a residual flow synthesizes the missing perceptual details from noise without repeatedly relearning or overwriting the complete restoration solution. We further distill the teacher into a deployment-oriented one-step student within a coarse-to-fine pyramid architecture. Extensive experiments show that PixelIR achieves leading PSNR, SSIM, and LPIPS on both RealSR and DRealSR. The final model completes pixel-space restoration in a single evaluation with only 32.9M parameters, 89.7G MACs, and 8.5ms latency, demonstrating a strong practical fidelity-perception-efficiency balance.

Magnetic Particle Imaging (MPI) is an emerging medical imaging modality. MPI is based on the non-linear response of magnetic nanoparticles to an applied magnetic field and avoids ionizing radiation. The measured signal is the voltage induced in receive coils by the particles' response. Reconstructing the particle concentration from the signal constitutes the imaging task. Even using state-of-the-art measurement-based reconstruction, the associated spatial grid is very coarse, hence super-resolution (SR) techniques are important. In this work, we propose an approach for SR in MPI inspired by energy minimization. Different methods have been proposed for SR in MPI, ranging from upscaling of the associated system matrix to interpolation of the reconstruction. Here we incorporate SR into the reconstruction task via an energy minimization formulation. Following the plug-and-play approach to energy minimization we derive a splitting scheme and a SR method for MPI where the arising Gaussian denoising task is treated with a pre-trained learned Gaussian denoiser in a zero-shot fashion. This way, we incorporate benefits of deep learning without training and avoid the need of training data. Further, we provide a quantitative and qualitative evaluation of the proposed method. Hyper-parameter are selected via an extended parameter search. The found parameters are applied for reconstruction on real data. We show the applicability of our method on synthetic and on real data (MPIData: EquilibriumModelWithAnisotropy and 2D-OpenMPI Data). The proposed method employs a deep-learning denoiser without training -- thus it does not require presently scarcely available MPI training data. The denoiser behaves conservatively, i.e., no hallucination artifacts were observed. The SR approach is generic such that it can be applied in future MPI contexts involving different regularizers or different imaging tasks.

Diffusion-based super-resolution (SR) achieves strong perceptual quality but requires costly iterative denoising. Existing one-step distillation methods reduce inference time but depend on expensive pretrained teachers, whereas CTMSR avoids distillation through PF-ODE consistency training yet does not explicitly model the restoration dynamics from low-resolution (LR) inputs to high-resolution (HR) images. We propose MeanSR, a one-step perceptual SR method that learns an LR-conditioned average velocity field to directly capture the finite-time transition from degraded or noisy inputs to plausible HR outputs. We further reformulate distribution trajectory matching for average-velocity generation and introduce a Stage-Aware Temporal Sampling strategy to improve trajectory learning. Experiments on synthetic and real-world benchmarks show that MeanSR outperforms CTMSR on CLIPIQA, MUSIQ, and MANIQA while substantially reducing FLOPs and inference latency. MeanSR also reconstructs sharper structures and more realistic textures with fewer perceptual artifacts.

Real-world image super-resolution (Real-ISR) aims to reconstruct high-quality (HQ) images from low-quality (LQ) inputs subject to diverse real-world degradations. Recent advances have leveraged the LQ inputs and natural image priors learned by Stable Diffusion models to achieve impressive results. However, existing methods often overlook insufficient clarity of LQ inputs inevitably induce content drift in the generated HQ images. This manifests primarily as visual detail degradation and textual semantic shift, severely compromising both fidelity and perceptual quality. To address this challenge, we propose FSP-Diff, a novel one-step diffusion model featuring a dual-pathway architecture. This architecture comprises a Detail-Conditioned Pathway for injecting structured details to recover fine structures, and a Detail-Modulated Semantic Pathway that refines semantic guidance using structured details to mitigate semantic deviations. Extensive experiments on standard Real-ISR benchmarks demonstrate that FSP-Diff surpasses existing one-step diffusion methods in both quantitative and qualitative metrics.

Unmanned aerial vehicle (UAV) infrared image super-resolution aims to recover weak thermal structures for deployment on resource-constrained platforms; lightweight models are therefore preferred, but multi-loss training can be unstable. A common strategy combines pixel-domain and frequency-domain objectives; however, low contrast, limited high-frequency content, and sensor-specific noise often make their gradients weakly aligned or conflicting. To address this optimization ambiguity, we propose Orthogonal Gradient Gaming and Frequency Rectification (OGG-FR), a plug-and-play optimization framework that decomposes the frequency gradient into a redundant parallel component and an orthogonal innovation component relative to the pixel gradient. In the conflict regime, OGG-FR computes a safe base gradient using the Multiple Gradient Descent Algorithm (MGDA) and adds a variance-rectified orthogonal innovation; in the compatible regime, it discards redundant parallel information and injects the orthogonal innovation according to a confidence score estimated from the high-frequency residual. Experimental results on the UAV thermal benchmark show broad gains under BI and BD degradations at $\times 4$ and $\times 8$ scales, while gradient analyses support the effectiveness of the proposed conflict-aware update rule.

Image super-resolution (SR) with large generative models has recently achieved remarkable perceptual quality, yet maintaining fidelity to the LR observation remains challenging. In particular, we observe that diffusion transformers (DiTs) built on latent representations suffer from a critical limitation: the compression bottleneck of the VAE weakens fine-grained spatial information, leading to hallucinated details that are weakly grounded in the input image. In this work, we revisit generative SR from a representation perspective and propose a pixel-grounded super-resolution (PGSR) framework that preserves LR-observed pixel evidence before VAE compression and reuses it throughout restoration. Instead of relying solely on the compressed latent condition, PGSR extracts pre-VAE pixel evidence from the upsampled LR image and reuses it at two stages. First, Condition-Side Trajectory Guidance fuses LR-derived pixel evidence with the latent LR condition to guide the latent restoration trajectory. Second, Decoder-Side Pixel Grounding injects multi-scale pixel features into the frozen VAE decoder to ground the final rendering with LR-observed cues. To efficiently adapt large pretrained DiT models, we keep the latent autoencoder and main flow-matching backbone frozen, and train only lightweight restoration modules. We further study an efficient local-window attention variant for improved high-resolution efficiency and scalability. Extensive experiments demonstrate that PGSR improves the realism--fidelity trade-off and produces more faithful, visually convincing results than existing latent generative SR approaches.

T2-weighted (T2w) brain MRI provides fluid-sensitive soft-tissue contrast that is important for neuro-oncology and radiotherapy planning. However, T2w scans are acquired with anisotropic voxels and appear blurred or stair-stepped on coronal and sagittal views, which obscures small structures and weakens any downstream 3D analysis. We propose VIPP-SR (View-Independent Patched Projection Super-Resolution), a cross-contrast guided super-resolution framework that restores the inter-plane resolution of an existing anisotropic T2w volume without an isotropic ground-truth T2w. VIPP-SR first trains a view-independent patched generator (VIP-GAN) to learn local T1c-to-T2w anatomical correspondence from high-resolution axial slices. The trained generator is then applied to axial, coronal, and sagittal views of the T1c volume to generate three orthogonal T2w estimates. Shape-preserving patching and deepest-skip removal reduce view-specific shortcuts, thereby constraining the generator to learn patch-local representations and enabling the zero-shot inter-plane transfer. Central to VIPP-SR, a projection-based optimization then enforces anatomical consistency across the three view-specific volumes, fusing them by balancing inter-plane self-consistency against per-view data fidelity. The generator is trained on BraTS-MET and evaluated on both the held-out BraTS-MET testing set and the BraTS-GLI cohort without retraining, assessing the cross-cohort generalizability. The results validate that VIPP-SR improves downstream segmentation over the real anisotropic T2w baseline, raising mean-label Dice from 0.330 to 0.465 on BraTS-MET and, zero-shot, from 0.473 to 0.563 on BraTS-GLI and ablation studies identify inter-plane self-consistency as the main source of the gain.

High-resolution climate data is crucial for meteorological predictions and for informing decision support across diverse domains. However, the acquisition of such high-resolution climate information is often prohibitively costly, necessitating the development of data-driven meteorological prediction models. These models aim to generate fine-grained climate data from low-resolution inputs, a process termed climate data super-resolution (SR). Nevertheless, recent advancements in deep learning for climate data SR have primarily focused on leveraging single-frame spatial information, largely neglecting the temporal correlations between different time frames that could enhance SR outcomes. Furthermore, climate data are inherently stochastic and noisy, rendering widely used temporal alignment methods, such as optical flow models, ineffective in this context. Consequently, the development of a framework tailored for climate data SR that effectively captures implicit temporal correlations remains an unresolved challenge. To this end, we propose a novel Temporal-Enhanced framework with bidirectional temporal alignment. In essence, our framework establishes a temporal bridge to enhance spatial resolution in climate data SR through bidirectional alignment, leading to improved SR performance. Within this framework, Paired Latent Mapping achieves spatial alignment and noise reduction by unifying latent spaces. Then a Bidirectional Temporal Alignment captures temporal correlations by training forward and backward networks on consecutive latent frames. Temporal Enhanced Super-resolution then optimizes the entire framework for climate data SR. Experiments on large-scale real-world datasets demonstrated the superior performance of our framework.

Scene text image super-resolution (STISR) aims to recover visually plausible appearance while preserving character semantics from degraded inputs. Existing STISR systems often rely on externally generated priors or separate image and text models, resulting in error propagation and costly multi-stage inference. We present DualTSR, a unified framework that formulates STISR as coupled continuous-discrete generation. Conditional flow matching restores continuous image latents, while absorbing-state discrete diffusion reconstructs text tokens. Both processes share a multimodal transformer backbone, allowing the evolving image and text states to interact throughout generation without an external OCR prior at inference. On CTR-TSR, DualTSR achieves the best FID, LPIPS, ACC, and NED among the compared methods at both X2 and X4. On an aligned RealCE subset, it obtains the best FID, ACC, and NED with competitive LPIPS. Compared with DiffTSR at X4, DualTSR improves ACC by 12.78 percentage points while reducing the parameter count from 1.23B to 203M and end-to-end latency from 13.3s to 132ms. These results establish DualTSR as an accurate and efficient method for STISR.

Accurate diagnosis in Digital Pathology (DP) relies on high-resolution whole-slide images, yet clinical deployment is often limited by hardware costs. Super-Resolution (SR) offers a promising alternative by computationally enhancing low-resolution acquisitions. However, existing SR methods frequently struggle to preserve fine-grained cellular morphology, leading to texture oversmoothing and blurred structural boundaries under complex tissue variability. To address this issue, we propose Morph-ISR, a morphology-aware implicit super-resolution framework for DP that restores diagnostically relevant details with sub-pixel precision. Morph-ISR reformulates SR as a continuous coordinate-based reconstruction problem and integrates an Implicit Position-aware Kernel Generator (IPKG) to adaptively model spatially varying tissue morphology. To further enhance structural fidelity, a Morphological Fidelity Prior (MFP) is introduced, leveraging semantic guidance from a pre-trained cell segmentation network to enforce boundary-preserving and region-aware reconstruction, thereby improving the representation of critical cellular boundaries and nuclear textures. Experiments on TCGA and SurGen datasets show that Morph-ISR achieves the best LPIPS and ST-LPIPS among the evaluated methods, reducing them by up to 38.37% and 39.55%, respectively, over the second-best methods while maintaining strong PSNR and SSIM. These results demonstrate superior preservation of diagnostically relevant cellular boundaries and nuclear textures, while compact parameterization and high throughput support efficient edge deployment. Code and trained models will be released upon publication.

Digital pathology relies on high-resolution whole slide images for accurate diagnosis, yet limitations in imaging devices, storage, and transmission often make lower-resolution pathology images more common in clinical workflows. Current super-resolution techniques often tend to smooth diagnostically relevant morphology, leading to over-smoothed textures and semantic drift that compromise downstream clinical interpretation. To this end, we develop the Structural Semantic Synergy Diffusion Model (S3-Diff), a diffusion framework for high-fidelity super-resolution of pathological images. The core of S3-Diff is Specimen-aware Structural Anchoring (SSA), which combines prognosis-aware tissue support extracted by a fixed SAM with LR-HR gradient discrepancies to generate a specimen-specific structural anchor to preserve pathological morphology. Concurrently, we introduce Structure-guided Semantic Fidelity Tuning (SSFT) to adapt DINOv3 representations using SSA-derived structural supervision. SSFT combines the adapted semantic energy with LR-derived edge and grayscale cues. The resulting control guides denoising to suppress stochastic artifacts and maintain structural consistency. Extensive experimental results demonstrate that S3-Diff consistently outperforms state-of-the-art methods in both reconstruction quality and downstream survival analysis performance. The source code will be made public.

Infrared image super-resolution (IISR) is important for downstream tasks such as object detection and semantic segmentation. Existing IISR methods often produce artificial textures, over-sharpened edges, and spurious high-frequency details that distort authentic thermal structures and semantic information. To address this issue, we propose FaithIR, a faithful infrared super-resolution framework for reliable machine perception. FaithIR consists of a patch-level conditioning branch that captures global thermal and structural information and a pixel-level restoration branch that performs dense local reconstruction under structural guidance. The entire restoration process is performed directly in the pixel domain to preserve infrared-specific structures and task-relevant information. Extensive experiments on FLIR-IISR, M3FD, and FMB demonstrate strong reconstruction fidelity, cross-dataset generalization, and superior performance in object detection and semantic segmentation. These results show that demonstrate that preserving faithful infrared structure preservations is more important for reliable machine perception than merely pursuing perceptual sharpness alone.

The Loggia dei Lanzi in the Piazza della Signoria is one of Florence's most prominent structures visited by millions every year. Its construction history spans multiple centuries of modification. This paper presents the results of a thermal imaging campaign conducted in December 2025, using a FLIR T1020 HD camera, revealing hidden architectural features including walled-up openings and material transitions beneath the plaster surface. The favorable winter ambient conditions provided a feature-rich benchmark upon which to compare the results of enhancement algorithms and artificial intelligence models. We evaluate the application of AI-based image enhancement to thermal heritage documentation through a comparison of three tiers of image resolution in a photogrammetric Structure-from-Motion (SfM) pipeline: native resolution, FLIR's hardware-based pixel-shifted super-resolution (UltraMax), and state of the art AI-upscaled imagery models. We quantify the effect of each resolution tier on feature detection and tie-point generation, assessing whether the additional detail produced by super-resolution, whether hardware or AI-derived, translates into meaningfully denser and more accurate 3D thermal models. Our results contribute to the emerging intersection of artificial intelligence and heritage thermography by providing a direct comparison of hardware microscanning and AI super-resolution within a thermal photogrammetric workflow for cultural heritage. All datasets are made publicly available and accessible within an interactive 3D archival framework, and integrated into a custom citywide extended reality overlay application.

Hyperspectral image super-resolution aims to reconstruct high-resolution imagery while preserving dense spectral information. Recently, Mamba-based models have shown promising potential for this task by capturing long-range dependencies with linear computational complexity. Nevertheless, their causal sequence modeling requires two-dimensional hyperspectral features to be unfolded along predefined scanning orders, which disrupts spatial adjacency and restricts the effective propagation of contextual information. Moreover, state-space parameterization of existing models is predominantly derived from generic learned representations, without explicit alignment with the intrinsic characteristics of the hyperspectral image. To address this issue, we propose an Unmixing-derived Spectral and Structural Prompting Mamba framework, termed USP-Mamba, which adapts Mamba state evolution through composition-aware spectral priors and image-dependent structural prompts. Specifically, an unmixing-informed spectral prompt captures the global material composition of the input image and provides persistent conditioning throughout reconstruction. Injected into the Mamba sequence and progressively adapted across layers, it steers state evolution toward composition-consistent reconstruction. We introduce feature-level structural prompts comprising spatial and frequency components to provide image-dependent local guidance. The spatial prompt promotes structure-sensitive state encoding for local detail preservation, while the frequency prompt enables region-adaptive transitions between homogeneous regions and high-frequency details. Finally, complementary Hilbert and Semantic-Guided Neighboring scans preserve spatial continuity and strengthen non-local semantic dependency modeling. Extensive experiments on different datasets demonstrate that the proposed method consistently outperforms representative approaches.

Hallucination remains a persistent challenge in generative super-resolution (GSR), where reconstructed results may contain visually plausible yet weakly supported content, structural deviations, or unnatural textures with respect to the low-resolution (LR) input. Existing GSR methods have extensively explored the trade-off between perceptual realism and reconstruction fidelity, but the division between preserving reliable coarse-scale information and restoring more uncertain fine details is often handled implicitly within the overall restoration process. Visual autoregressive (VAR) modeling provides a natural opportunity to revisit this issue, as its coarse-to-fine next-scale prediction offers an explicit scale-wise generation interface. However, existing VAR-based SR methods still inherit the original full 1-to-$N$ autoregressive generation path, even though, for super-resolution, coarse-scale information in LR is often relatively more reliable, while long autoregressive chains may accumulate prediction errors. Motivated by these observations, we propose \textbf{K2N}, which reformulates VAR-based SR from full-path generation into a $k$-to-$N$ detail continuation process. Specifically, early coarse-scale states are established directly from LR, while only the remaining finer scales are restored autoregressively. Experimental results show that K2N remains competitive with the VARSR baseline on standard SR metrics, while exhibiting clearer advantages on hallucination-focused evaluation. These findings suggest that explicitly rethinking the generation path in a scale-wise manner can be a promising direction for improving the reliability of generative super-resolution. Our code will be released soon at https://github.com/BRL-SYSU/K2NSR.

Deploying ML models in regulated decision-making (credit underwriting, fraud detection, loan approval) requires demonstrating fairness and robustness to auditors without exposing model weights or customer data. We address this attestation problem for U.S. bank supervision under SR 11-7 and OCC 2011-12 guidance. We present a chunked zero-knowledge circuit design that attests an aggregated fairness statistic - the demographic-parity gap - on committed, nonce-sampled batches of real 2022 HMDA mortgage data, and demonstrate it end-to-end: 32,768 rows, 32 independently verified zkSNARK proofs, aggregated attested gap within 0.0029 of the true held-out value, per-chunk proving under 4 seconds. We also demonstrate extensibility by attesting a second control on the identical architecture - expected calibration error at 10 bins - with all 32 chunks verified, per-chunk proving at about 14.7 seconds, and attested ECE within 0.00037 of the plaintext value on the same committed rows. We compare this design against two alternatives - a flat summation circuit, which overflows past a few thousand rows, and a tree-reduction circuit, numerically exact but intractable to compile - and find the chunked design is the only one that reached this scale. We discovered and root-caused a genuine data-quality failure (a sentinel-code outlier distorting circuit proving and the fairness statistic itself) and resolved it with a published preprocessing specification. We also propose a fuller mapping from SR 11-7 and OCC 2011-12 control language to zero-knowledge statements (nine control elements spanning soundness, calibration, robustness, and drift), a nonce-based sampling protocol resisting bank-side cherry-picking, and a threat model for deployment, proposed as design work, not implemented results. Two controls, one model class, one task are demonstrated end-to-end; the rest is scoped and left as future work.

Screen content images are generally composed of texts and graphics. Compared to natural images, these man-made images contain a large quantity of sharp but repetitive structures. However, existing works in screen content super-resolution underutilize the special characteristics of screen content, leaving a large room to improve model performance and speed up. In this paper, we propose PixelSR, a simple yet effective method to improve super-resolution performance but with faster inference speed. To improve model performance, we classify pixels via pixel binning to compute content attention in the training phase. Specifically, after binning pixels into content-dependent groups, content attention is aggregated from pixel features within each group to introduce a content-dependent and non-local receptive field for every pixel. In the testing phase, we utilize the properties of self-repetitiveness and redundancy in screen content to speed up inference without the loss of model performance. We divide targeted high-resolution pixels into three types, which are unique pixels, repeated pixels, and background pixels for each test image. We conduct conventional network processing on unique pixels and cache their predictions in the on-the-fly lookup table. For repeated pixels which have appeared in unique pixels, we directly retrieve prediction results from the lookup table without network processing. For background pixels, we use the nearest neighbor algorithm to generate high-resolution pixels. The on-the-fly lookup table is cleaned and repeats the procedure above for the next test image. Experiments show our PixelSR achieves state-of-the-art performance with shorter inference time in screen content super-resolution.

We propose a novel collaborative approach for face super-resolution (SR) and robust person re-identification from sequential or multi-view facial images. Traditional SR methods often suffer from blurring and distortion in faces recovered from poor-quality images due to low resolution. Image- and video-based facial SR methods using facial landmarks or segmentation also have similar challenges. To overcome these limitations, we leverage multiple correlated facial observations, across time or viewpoints, by introducing a transformer-based collaborative feature aggregation method that unifies identity features from multi-sequence or multi-view data. This allows faces in multiple sequences of an individual to contribute to accurately estimating common facial features. Furthermore, we propose a cascade SR network to progressively restore the high-resolution image of the target's face with gradual facial feature unification. The unified identity representation is further utilized in person re-identification scenarios, enabling accurate matching even under severe image degradation. The exhaustive experimental results and comparisons show that our method outperforms other state-of-the-art methods, demonstrating consistent improvements in both face super-resolution and re-identification performance. Our work highlights the effectiveness of joint identity reconstruction and progressive image restoration from multiple facial inputs in enhancing downstream visual recognition tasks.

Mobile infrared-visible imaging typically pairs a compact infrared sensor with a high-resolution visible camera for complementary perception. While cross-sensor misalignment caused by different optics, viewpoints, fields of view, and exposure timings hinders practical deployment. In this paper, we propose BeyondFusion, a unified latent diffusion framework for calibration-free visible-guided infrared super-resolution and infrared-visible fusion tasks. The proposed framework supports both task-specific training and joint training where two tasks are optimized and executed as two readouts of the same generative process. Instead of relying on explicit registration or geometric warping, BeyondFusion introduces a cross-modal self-aligning (CMSA) module into the denoising U-Net. CMSA reorganizes infrared and visible latent tokens into a shared attention space to learn content-adaptive cross-modal correspondence during the denoising process. Together with misalignment augmentation module, the model is facilitated to exploit visible structural and semantic cues while preserving thermal consistency, enabling high-frequency infrared reconstruction and informative fused-image generation under uncalibrated conditions. Extensive experiments on public benchmarks and a mobile infrared-visible imaging system show strong performance across aligned inputs, low-resolution infrared observations, synthetic misalignments, and real mobile captures with unsynchronized sensors. Ablation studies, unified training analysis, and downstream pedestrian detection further validate the effectiveness of BeyondFusion for calibration-free multimodal imaging.

Trainable denoisers with Lipschitz control have become central to convergent image reconstruction. However, training neural networks that simultaneously offer strong denoising performance and global Lipschitz guarantees is challenging. Existing approaches enforce Lipschitz control only empirically, providing no guarantees beyond the training data. In this work, we show that by exploiting the action of permutations on the image lattice, we can constrain a neural architecture that is globally nonexpansive (Lipschitz bound $\leqslant 1$). We integrate the proposed denoiser with forward imaging operators to develop a reconstruction mechanism that is provably contractive and therefore globally convergent. Experiments on standard inverse problems, such as superresolution and deblurring, demonstrate that our reconstruction performance is competitive with softly constrained baselines while providing Lipschitz guarantees.

Efficient processing is becoming increasingly important in infrared remote sensing, where satellite constellations produce large volumes of observations under constrained detector resolution, power, and downlink bandwidth. Multi-frame super-resolution (MFSR) offers a software-based route to spatial enhancement, but its evaluation in infrared sensing remains fragmented across private datasets and ad-hoc protocols. Existing benchmarks do not explicitly capture the thermal contrast, sensor noise, weak texture, and platform-induced frame-to-frame variation that characterize infrared video. We introduce IR275K, a curated benchmark containing 594 infrared video sequences and 275,196 frames. It provides sequence-level train/validation/test splits and a reproducible X4 evaluation protocol. As an initial architectural probe, we further evaluate CGMamba, a lightweight state-space model with 10.90M parameters and 112.14G FLOPs. CGMamba combines 2D rotary position encoding (2DRoPE) with center-guided cross-Mamba (CGCM) fusion for implicit multi-frame reconstruction. It achieves 33.19dB PSNR, outperforming infrared single-image super-resolution references by 0.35--0.52dB at substantially lower computational cost. Ablation results show that removing 2D~RoPE from CGCM causes a 1.53dB drop and severe grid-like artifacts. This indicates that explicit spatial anchoring is critical for stabilizing SSM-based cross-frame gating under infrared conditions. IR275K provides a reproducible foundation for accuracy--efficiency evaluation of infrared MFSR methods, while the architectural analysis offers a concrete starting point for spatially aware SSM design under resource-constrained infrared sensing. Dataset and evaluation resources are available at: https://github.com/InfraRecon7/IR275K.

Numerous 3D assets are discarded due to low texture resolution, while current super-resolution models ignore texture maps and focus on natural images. An efficient and generalizable texture super-resolution model can revitalize a large corpus of aging yet valuable assets across industries such as film and video games. We present Texture++, a novel framework for texture super-resolution, which enhances the low-resolution textures of assets to produce high-resolution, high-quality results. Specifically, we reformulate the task of super-resolution in UV space into performing it across multiple rendered views and merging the outputs. Firstly, to achieve more complete and continuous textures in the view space, we propose an adaptive view selection strategy to integrate textures dispersed across UV texture patches. Furthermore, we introduce a quadtree-based texture region organization method for combining super-resolved textures from different viewpoints, providing masks to distinguish regions that require improvement. Finally, we design a diffusion-based super-resolution model that enhances the texture resolution for specified masked regions, seamlessly integrating with surrounding regions. Through comprehensive evaluations, we demonstrate that our approach yields textures with substantially improved detail and coherence over existing methods.

Cross-modality image translation offers a route to super-resolution fluorescence microscopy from low-resolution images while reducing phototoxicity and instrumentation demands. However, purely data-driven models can produce visually plausible outputs that are inconsistent with optical image formation. Here, we propose a physics-informed generative adversarial network for confocal-to-STED image translation that incorporates microscope-specific point spread function information into the training objective. Simulated and experimentally measured PSFs were evaluated using a limited paired confocal-STED dataset of TOM20-labeled mitochondria in human primary M2 macrophages acquired across different experimental days. Performance was assessed using reference-based and non-reference-based image-quality metrics, together with complementary frequency- and distribution-sensitive analyses. The no-reference metrics probed physics-relevant image properties, including spatial-frequency content, contrast, and signal-to-noise behavior. PSF-guided models improved structural fidelity, reduced local deviations, and achieved closer agreement with STED references than non-PSF baselines, particularly in frequency-domain analyses. These results demonstrate that optical priors can improve the structural fidelity and physical plausibility of generative microscopy models for cross-modality super-resolution imaging.

Infrared image super-resolution (IISR) mitigates the limitations imposed by low spatial resolution. Existing methods have recognized that IISR should preserve consistency in global distribution and structural information while enhancing image clarity. However, these methods are either insufficient or overly intrusive, a problem that becomes even more pronounced in diffusion-based models. To address these issues, we propose a dual-path diffusion-based framework for IISR, termed Shift-IISR. The proposed method is designed to improve the consistency of IISR results while preserving the generative capacity of diffusion models. Specifically, we develop a Global Representation Modulation (GRM) module to extract modality-specific information from infrared imagery and guide the global distribution of the diffusion model toward the ground truth. In addition, we introduce a Local Structure Refinement (LSR) module to encourage the model to focus on structural information at each step of the iterative denoising process. Extensive experiments demonstrate that the proposed method effectively improves distributional and structural consistency while maintaining competitive super-resolution performance. The source code of the proposed Shift-IISR can be available at https://github.com/Assassink8/Shift-IISR.

Continuous diffusion models have become the dominant paradigm for photo-realistic image Super-Resolution (SR), but they typically formulate reconstruction as continuous signal-level denoising and incorporate semantic priors through external conditioning modules. This makes it less direct to exploit the unified token-based scaling paradigm of modern multimodal models. Autoregressive models provide a more native semantic representation by modeling images as discrete visual tokens, yet their causal decoding is inefficient for high-resolution reconstruction. Discrete diffusion offers a promising middle ground by enabling non-causal, parallel prediction over visual tokens. However, directly adapting discrete diffusion to SR remains non-trivial due to two task-specific challenges: (1) the long-tailed distribution of visual tokens, which under-represents rare but perceptually critical textures; and (2) spatially inconsistent parallel decoding, which may introduce isolated artifacts. To address these issues, we propose DiMOO-SR, a rarity-aware multimodal discrete diffusion framework for photo-realistic image SR. During training, Inverse Frequency Sampling (IFS) prioritizes under-represented but information-rich tokens. During inference, Spatial Consistency Ranking (SCR) refines token confidence using local neighborhood agreement to improve structural coherence. Extensive experiments on widely used real-world SR benchmarks demonstrate that DiMOO-SR achieves competitive perceptual quality with only a few parallel decoding steps, highlighting the potential of discrete diffusion for generative image super-resolution. The code will be released upon publication.

Super-resolution can make inspection images appear sharper without preserving the evidence needed to detect a defect. We study this failure mode with a benchmark that separates reconstruction from detection and evaluates both at a predeclared low false-positive rate. Ten end-to-end repetitions combine independently generated line/space and contact-hole images with model training, calibration, clean controls, weak defects, and a held-out defect morphology. Every reconstruction is scored by the same local residual detector, while direct and jointly trained detectors form a separate comparison track. Reconstruction fidelity and inspection utility diverge: the two learned reconstruction models attain the highest structural similarity yet detect fewer defect pixels than bicubic interpolation in every paired repetition. A direct DeepLabV3 detector reaches $0.1984\pm0.0385$ recall at $0.000174\pm0.000084$ false-positive rate and satisfies the held-out feasibility criterion in all ten repetitions. An illustrative joint model, DPU-WaferSR, passes independent clean calibration but exceeds the held-out limit in all ten repetitions, demonstrating that calibration success does not guarantee transfer. Weak-defect recall remains near zero for every feasible method. Applying the unchanged policies to 4,591 public Carinthia-S masks further reveals large method-dependent shifts on real SEM texture. These results support a simple conclusion: super-resolution for inspection should be judged by preserved task evidence and operating-point transfer, not reconstruction quality alone.

Diffusion-based methods have achieved impressive performance in real-world image super-resolution (Real-ISR) by leveraging large pre-trained stable diffusion (SD) models as powerful generative priors. However, these methods still face two key limitations. First, existing SD-based one-step and multi-step Real-ISR approaches adopt a unified processing paradigm for all input samples, ignoring the varying restoration difficulty across images. Second, the aggressive resolution reduction of the VAE in SD models (e.g., 8x downsampling) leads to irreversible loss of fine-scale details, which cannot be recovered by the subsequent diffusion process. To address these limitations, we propose a Difficulty-aware Dynamic Routing (DDR) strategy that overcomes the rigid, one-size-fits-all processing paradigm. Specifically, we first design a difficulty estimator to predict the restoration cost of each input image, enabling automatic assignment to a network of appropriate capacity. Then, we construct a set of Real-ISR networks with varying model capacities by modulating the spatial downsampling ratio of the VAE in the SD backbone, thereby preserving more high-frequency information for challenging cases while maintaining efficiency for simpler inputs. Extensive experiments have demonstrated the superior efficiency and effectiveness of the proposed model compared to recent state-of-the-art methods.

Recently, Vision Transformer (ViT)-based models have exhibited remarkable performance in image super-resolution. However, the quadratic computational complexity of ViTs with respect to spatial resolution severely constrains their efficiency, leading to high latency and massive memory consumption. To alleviate this, various window-based attention mechanisms have been proposed; yet, they inherently compromise the long-range dependency modeling that is the primary advantage of ViTs. To overcome these limitations, we propose the Clustered Unit-level Similarity Transformer (CUST), a novel architecture that efficiently integrates global and local information. Specifically, CUST enables each patch to aggregate and attend to similar patches within a broadened regional scope outside its local window, thereby capturing extensive contextual understanding. Furthermore, it employs overlapping attention windows to capture local dependencies, while explicitly extracting high-frequency details by computing the residual difference between the original features and their downsampled-upsampled counterparts. Comprehensive experiments demonstrate that our proposed model achieves a practical balance between computational efficiency and restoration performance. It achieves a lower memory footprint and faster inference speed compared to recent global context or lightweight models under realistic constraints. Code is available at [https://github.com/jwgdmkj/CUST].

Single Image Super-Resolution (SISR) reconstructs high-quality images from low-resolution inputs. While recent multi-modal methods improve perceptual quality, they remain sensitive to erroneous priors and require expensive annotations. To address these issues, we propose Simon-SR, a multi-modal SISR framework leveraging learnable prompts for efficient semantic mining and robust text-image fusion. Our approach combines Contrastive Prompt Learning with Prompt-Guided Spatially Adaptive Refinement to enhance multi-modal alignment. Experiments demonstrate that Simon-SR surpasses state-of-the-art methods, achieving maximum improvements of 0.50 dB in PSNR, 0.0133 in SSIM, and 0.0695 in LPIPS. Code will be released.

Clinical cardiac MRI is commonly acquired with high in-plane resolution but coarse through-plane resolution to reduce scan time and accommodate breath-hold and cardiac-motion constraints, which limits 3D analysis and diagnostic accuracy. We propose STRMSR, a reference- and memory-guided through-plane super-resolution (SR) framework that reconstructs high-resolution (HR) cardiac volumes by leveraging HR reference views acquired from the same subject and intermediate SR results as the memory. Our method uses coarse-to-fine contextual matching to establish robust correspondence between low-resolution target and reference/memory images under spatial misalignment. A learnable patch-wise dynamic feature aggregation module predicts content-adaptive mixture weights for each local patch, effectively fusing dynamic information while suppressing unreliable feature transfers. The intermediate SR results stored in the memory bank ensure slice-to-slice consistency for the super-resolved 3D volume. Experiments on the WHS cardiac MRI dataset under two reference protocols, orthogonal-plane views and long-axis chamber views, demonstrate consistent improvements over baselines at 4x and 8x upsampling factors.

Images acquired in surveillance environments often suffer from conditions such as low resolution, variations in pose, irregular illumination, and occlusions. Due to the low quality of these images, face recognition algorithms often struggle. This major limitation can be addressed by employing super-resolution techniques that enhance the details of the image. However, due to the high degree of difficulty of the problem, most super-resolution algorithms tend to cause distortions in the image and in the individual's identity. Thus, additional information must be incorporated into the processing to improve recognition robustness. In this regard, surveillance cameras can capture multiple images, even at low quality, and the data extracted from these images, such as consecutive video frames, can significantly enhance both super-resolution and facial recognition. In this work, we introduce FASR++, a diffusion-model-based super-resolution algorithm. It leverages a reference low-resolution image and features extracted from multiple auxiliary low-quality images to generate a super-resolved output, minimizing distortions in the individual's identity. Our approach recovers facial features without explicitly providing soft attributes or computing a function gradient to guide the reconstruction process. FASR++ generates high-quality images that can considerably improve performance in face recognition tasks when used as a pre-processing step. We validate our approach on two standard face recognition datasets and attain state-of-the-art results for verification, face recognition, and image quality metrics such as PSNR, SSIM, and LPIPS.

High-resolution satellite imagery is critical for observing fine-scale cloud structures that inform weather modification strategies like cloud seeding for rain-enhancement. However, the spatial resolution of current geostationary and polar-orbiting satellites is often insufficient for capturing small cloud features. Current super-resolution methodologies are suited for natural images and, therefore, struggle to generalize to satellite-captured spectral images of cloud cover. To address this, we propose a two-stage diffusion-based super-resolution framework to enhance the resolution of multi-spectral cloud microstructures by a factor of $4\times$. Specifically, we use inverse diffusion to recover the high resolution properties from low resolution. Stage 1 utilizes real-world paired data to learn robust degradation handling and inter-sensor alignment, while Stage 2 employs a self-supervised internal downgrading of high resolution data to refine structural learning and texture synthesis. Our approach outperforms the state-of-the-art transformer and diffusion-based baselines in both reconstruction accuracy and visual quality. We demonstrate that the two-stage method better captures fine cloud microstructures (e.g. convective turrets and cloud gaps) that are crucial for effective cloud seeding decisions. Ablation studies confirm the complementary benefits of the two stages: Stage 1 excels in coarse structural fidelity, while Stage 2 contributes enhanced detail and realism. These results highlight a practical path toward improving cloud microphysics analysis and as a step towards utilizing AI for climate and sustainability. Our code and models are publicly available at: https://github.com/hananshafi/superresolution-cloud-microphysics.

Light Field Super-Resolution (LFSR) necessitates accurate modeling of spatial-angular correlations while preserving intrinsic 4D ray coherence. However, maintaining such high-dimensional consistency remains challenging, primarily due to two inherent limitations in prevailing modeling paradigms. First, spatial and angular dimensions are often modeled in a decoupled manner, restricting early cross-dimensional interaction and leading to geometric inconsistencies. Moreover, although continuous sequence modeling paradigms show promise in representing epipolar structures, their rigid scanning mechanisms fundamentally conflict with epipolar geometry, limiting geometry-aware feature aggregation. To address these challenges, we propose a hybrid light field super-resolution network, termed SMART, which integrates a Slope-Guided Mamba and an Angular-Refined Transformer to effectively overcome these limitations. Specifically, we introduce an angular-modulated spatial module to bridge the decoupling gap, incorporating angular priors to strengthen spatial-angular correlation modeling. To mitigate the scan-geometry mismatch, we propose a manifold-aligned trajectory module that enables geometry-consistent sequence modeling along epipolar structures. Experiments on five benchmarks demonstrate that SMART achieves state-of-the-art performance, surpassing previous methods by 0.42 dB (PSNR) with significantly reduced artifacts.

Single image super-resolution aims to reconstruct high-resolution (HR) images from low-resolution (LR) inputs. Training SR models typically requires paired HR-LR data, which is difficult to obtain in reality. As a result, most methods synthesize LR images by artificially degrading HR images with handcrafted kernels or camera ISP adjustments. However, these synthetic degradations fail to capture the complexity of real LR images, leading to poor generalization in practice. To address this, we observe that even within a single high-quality image, regions at different depths exhibit varying resolutions, where distant regions act as LR patches and closer ones as HR patches. This allows the extraction of real, degradation-induced LR patches from real images. Since these LR patches lack paired HR counterparts, we propose LA-SR (Language Assistant for SR), a novel framework for unpaired SR. The key idea of LA-SR is to redefine unpaired SR in the language space, using vision-language models to bridge the LR-HR gap. LA-SR projects images into a semantically rich space representing both content and quality, and applies two language-guided losses: linguistic content loss to preserve semantic fidelity, and linguistic quality loss to enhance perceptual realism. With this alignment, LA-SR effectively super-resolves real LR inputs, producing realistic outputs that overcome the limitations of synthetic-data-trained methods.

Diffusion models enable probabilistic super-resolution and conditional generation, but pixel-space methods are computationally expensive and learned latent spaces often lack interpretable uncertainty quantification. We introduce Patch-PODiff-ViT, a structured latent diffusion framework in which the latent space is defined by patchwise Proper Orthogonal Decomposition (POD), a fixed linear orthonormal basis over local patches, rather than learned by a nonlinear autoencoder. This yields low-dimensional, variance-ordered tokens that preserve spatial structure and enable efficient diffusion in a structured low-dimensional latent space with a Vision Transformer. Because the decoder is fixed, linear, and orthonormal, latent coefficient uncertainty can be propagated directly to physical-space predictive variance, enabling analytic propagation of predictive variance through the linear decoder without Monte Carlo estimation in pixel space. Across sea surface temperature, medical imaging, and natural images, the method achieves strong reconstruction with fewer parameters and lower memory, while producing well-calibrated spatial uncertainty that closely matches empirical ensembles.

Volume microscopy, including electron and light microscopy, suffers from severe anisotropic resolution due to physical axial sectioning. Existing self-supervised axial super-resolution (ASR) methods face a trilemma bounded by overly smoothed regression textures, structural hallucinations of pure diffusion models, and prohibitive inference latency. In this paper, we propose Skeleton-refinE Microscopy (SkelEM), a self-supervised framework that decouples ASR at the training-signal level: a frozen topological network and a diffusion refiner are optimized by disjoint objectives, separating low-frequency topology formulation from high-frequency detail enhancement. Building on this deterministic skeleton, we exploit a unified cycle-consistent mechanism on input sparse slices to simultaneously extract a real-domain residual prior and bidirectionally align the diffusion refiner, washing away cross-plane artifacts without synthetic bias. By truncating the reverse diffusion process with this physical prior, SkelEM achieves high-fidelity detail restoration in merely $\le 5$ steps. To rigorously assess cross-instrument generalization, we further introduce BRAVE-ASR, a new benchmark of co-aligned anisotropic and isotropic volumes acquired on a Plasma-FIB instrument. Across public benchmarks, SkelEM achieves the most favorable balance across the fidelity-perception trade-off among self-supervised methods, with state-of-the-art downstream membrane segmentation performance and robust zero-shot generalization across distinct modalities.

Online product listings for garments often include an overview photo and a close-up to show garment details. However, each photo focuses on either field of view or garment detail, forcing users to alternate between views and breaking browsing continuity. We present GarmentZoom, a system that enhances the full-view photo to match the fidelity of its accompanying close-up, enabling seamless zoom-and-pan exploration. Unlike standard reference-based super-resolution, our setting involves close-up references that are spatially unaligned with the full view, and scale factors that vary substantially across garments 3-20$\times$. Prior work typically relies on alignment to transfer details or requires per-instance fine-tuning to memorize them. Instead, we train a single model that supports a continuous range of scales across diverse garments. Our approach synthesizes details without requiring spatial alignment and matches the quality of per-instance methods with a fraction of the training cost.

With the growing demand for immersive visual experiences, high-quality omnidirectional images (ODIs) have become increasingly important. However, limitations in imaging devices and transmission bandwidth often lead to low-resolution ODIs, hindering the rendering of fine-grained 360° details, especially in the presence of real-world degradations and geometric distortions. Existing real-world super-resolution (Real-SR) methods are inadequate for ODIs, as their degradation models fail to account for the complex imaging pipeline involving fisheye capture and Equirectangular Projection (ERP), introducing severe aliasing and projection-specific distortions. To address these challenges, we propose D$^{2}$R$^{2}$OSR, a Degradation-Disentangled Representation framework for Real-world Omnidirectional image Super-Resolution. D$^{2}$R$^{2}$OSR explicitly models degradations arising from both fisheye imaging and ERP projection, guided by two key insights: (1) projection priors play a critical role in shaping real-world degradations, and (2) human perception in immersive environments is inherently viewpoint-centric. Accordingly, we introduce a Perspective Projection Representation (PPR) operating alongside the ERP branch to capture viewpoint-aware features, together with a Degradation-Specific Module (DSM) that jointly models ERP-induced geometric distortions and PPR-specific real-world degradations. Extensive experiments demonstrate that D$^{2}$R$^{2}$OSR achieves state-of-the-art performance and produces visually compelling, high-fidelity omnidirectional Real-SR results while maintaining favorable computational efficiency for low-resource deployment.

Diffusion prior-based methods have shown impressive results in real-world image super-resolution (ISR), yet two key challenges persist: balancing pixel-level fidelity with semantic quality, and adapting to diverse degradations. Existing dual-branch approaches freeze the pixel module during semantic training, but the semantic branch can still expand capacity within the pixel subspace, precluding genuine perceptual improvement. Moreover, using a single static adapter cannot generalize across heterogeneous real-world corruptions. To address both issues, we propose FreqOrtho-SR, which comprises: $\textbf{Freq}$uency-guided Mixture of LoRA Experts (FreqMoE), it routes inputs to specialized experts via a non-parametric FFT-based degradation-feature extractor that encodes frequency-domain signatures, enabling stable and interpretable specialization across corruption types; and $\textbf{Ortho}$gonal Gradient Projection (OGP), which reframes the dual-objective optimization as a subspace-constrained problem: by extracting the pixel-fidelity subspace via SVD on combined expert weight deltas and projecting semantic gradients onto its null space, OGP guarantees orthogonality between the two objectives, enabling genuinely complementary learning without mutual interference. Experiments show that FreqOrtho-SR achieves competitive overall performance and a strong fidelity-perception trade-off across multiple benchmarks with efficient single-step inference. The source code of our method can be found at $\href{https://github.com/sonhm3029/FreqOrtho-SR}{\texttt{sonhm3029/FreqOrtho-SR}}$.

This work tackles the challenge of enhancing low-resolution LiDAR sensors for SLAM applications through a novel Deep Unrolling-based Super-Resolution (SR) model. We integrate an outlier removal module to ensure structural integrity while maintaining real-time performance. By leveraging a model-based optimization approach, our method efficiently reconstructs high-resolution point clouds while minimizing computational overhead. The proposed SR model is evaluated within a LiDAR SLAM framework, demonstrating significant improvements in pose estimation accuracy and efficiency compared to state-of-the-art SR methods.

Arbitrary slice super-resolution reconstructs isotropic volumes from anisotropic clinical acquisitions by synthesizing intermediate slices at arbitrary scales. However, treating this ill-posed inverse problem as unconstrained residual-based regression risks hallucinating anatomically implausible structures or altering the originally observed data. To address both concerns, this paper presents the Dual-Prior Null-space Learning (DP-NSL) framework, which reformulates the task as a constrained recovery process guided by two complementary priors. A Measurement-Consistent Projection (MCP) enforces a Deterministic Observation Prior: the reconstruction undergoes an exact orthogonal projection that reproduces every acquired slice with zero error, confining all learned details to the unobservable null space. Within this null space, a Mixture-of-Splines (MoS) module imposes a Geometric Continuity Prior by dynamically mixing B-spline experts of different analytic orders, allowing each anatomical region to be modeled with a content-aware level of continuity. To promote spatial coherence, a Local Spatial Consistency Decoder (LSCD) further injects local inductive bias. Experiments on three CT and one MRI benchmark show that DP-NSL outperforms existing approaches while strictly preserving measurement consistency. Code is available at https://github.com/DeepMed-Lab-ECNU/Medical-Image-Reconstruction.

High-resolution (HR) MRI acquisition is often hampered by scan time constraints, resulting in anisotropic or low-resolution scans (e.g., thick-slice FLAIR) that limit diagnostic accuracy. While deep learning-based super-resolution (SR) methods show promise, they often hallucinate anatomical details, which can compromise brain structural integrity. To mitigate this limitation, we introduce MR-DiffuSR, a Multi-Resolution Diffusion-based Super-Resolution framework that incorporates HR T1w structural image priors to guide the restoration of thick-slice FLAIR scans and operates in the 3D latent space. Our architecture introduces cross-modality structural swin-attention, which derives structural attention maps from the HR T1w and applies them to the low-resolution FLAIR latent features. This design disentangles anatomical structure from modality-specific contrast, effectively preventing hallucinations. Furthermore, we employ a mixed-scale degradation strategy, training the model on a continuum of downsampling factors to ensure robustness to varying slice thicknesses, while optimizing with a DINOv3-based perceptual loss to preserve high-frequency semantic details. Evaluated on the ADNI-4 dataset, MR-DiffuSR surpasses both CNN and 2D diffusion approaches, achieving an average PSNR of 32.46dB, SSIM of 0.97, and LPIPS of 0.07 across all downsampling factors. In downstream white matter hyperintensity segmentation, our model demonstrates exceptional robustness. While baseline performance collapses at 10x down-sampling (Dice: 0.51), MR-DiffuSR maintains a Dice score of 0.63, preserving utility even at 7mm equivalent slice thickness.

Fidelity and perceptual quality are two inherently competing and conflicting objectives in the image super-resolution (SR) task. Different loss functions focus on these objectives to varying extents. Regression losses enhance the model's fidelity but lack sufficient attention to high-frequency details, resulting in a loss of fine details. In contrast, perception losses improve the model's visual quality but may introduce undesirable artifacts. Balancing these two optimization goals can be viewed as a Multi-Objective Optimization problem. Existing methods are limited to cautiously adjusting weight parameters between these losses, overlooking the underlying Interest Entanglement problem. To address this problem, we explore the inherent frequency-domain conflict between the regression objective and the perceptual objective, and analyze the causes of Interest Entanglement in SR tasks. According to our findings, we propose the Shared-Feature-Representation based Super-Resolution framework (SFR), which decouples the learning process of different optimization objectives, allowing the model to explore a common optimization direction for both goals and achieve an effective balance between them. To better leverage shared features, we also proposed the InfoSqueeze module, which filters redundant information through a dimensionality reduction and expansion process, effectively transforming features into a consistent space. Quantitative and qualitative experiments across five representative datasets affirm the superiority of SFR.

Diffusion models excel in Real-World Image Super-Resolution (Real-ISR) due to their powerful generative priors but suffer from slow iterative sampling. Although existing one-step distillation methods accelerate inference, they typically require auxiliary teacher models that inflate training memory and restrict scalability to large-scale architectures. Furthermore, these fixed-step models lack the flexibility to trade off speed for quality. In this paper, we propose TEASR, a training-efficient any-step diffusion framework for Real-ISR that enables both one-step and multi-step restoration within a unified model. Our key idea is to perform self-adversarial distillation within a single diffusion model, eliminating the need for auxiliary teachers or discriminators. Specifically, we propose a timestep-aware rectification strategy that stabilizes one-step generation across noise levels. These two designs further enables the distillation of 20B-parameter diffusion models on a single GPU, significantly improving training efficiency. Moreover, we introduce a dual-branch diffusion transformer with decoupled timestep condition to separate the current noise state and the denoising target to enhance sampling quality. Extensive experiments demonstrate that TEASR supports seamless any-step sampling and consistently outperforms state-of-the-art methods across multiple datasets.

Reference-guided generation (e.g., object compositing, customization) has progressed rapidly, yet current pipelines share a fundamental limitation: the object-centric high-resolution reference image (HRRI) provided by users is downsampled to a fixed low-resolution (LR) before being fed into the model, so the fine-grained details are discarded before the output is even produced. In addition, the generation step then introduces its own artifacts (e.g., identity distortion) on top of this loss. Existing reference-guided generated content refinement (RefGCR) methods can correct some of these artifacts but still operate in the LR domain; reference-guided super-resolution (RefSR) methods recover resolution but assume natural-image degradations and ignore the artifact distribution of generative pipelines. To address both gaps in a single formulation, we introduce a new task: reference-guided generated content super-resolution-refinement (RefGC-SR$^2$), where the original HRRI is reused at the post-processing stage to recover lost details, refine generative artifacts, and upscale the output simultaneously. We construct the first real-world triplet data generation pipeline for this RefGC-SR$^2$ task, training a diptych-conditioned generator to synthesize paired low-quality anchors that public pretrained models cannot provide. We further present a frequency-aware diffusion transformer model for RefGC-SR$^2$ that selectively injects fine details from the HRRI while removing generative artifacts. Extensive experiments demonstrate that our RefGC-SR$^2$ model successfully (i) refines the object identity faithfully with respect to the reference, and (ii) recovers high-resolution details, so that the final result is significantly higher quality and practically more usable compared to existing RefGCR and RefSR baselines.

Zero-Shot Self-Supervised Learning (ZS-SSL) has emerged as a promising paradigm for accelerated Magnetic Resonance Imaging (MRI) reconstruction, eliminating the reliance on fully-sampled external datasets. However, learning solely from a single under-sampled scan suffers from supervision scarcity and optimization instability, often leading to overfitting or artifacts. To address these challenges, we propose a robust physics-driven ZS-SSL framework that synergizes physical consistency with image-domain non-local priors. Our method introduces three core innovations: (1) a Coil Sensitivity Map (CSM)-Guided Dynamic Repository, which stabilizes the training trajectory by filtering physically inconsistent artifacts based on coil sensitivity constraints; (2) a SPIRiT-based regularization, which enforces k-space self-consistency via a learned correlation kernel and stochastic masking; (3) a Non-Local Self-Similarity (NSS) Pixel Bank, which leverages the high-fidelity reference established by the former modules to explicitly mine non-local anatomical similarities, thereby augmenting supervision in the image domain. Extensive experiments on the FastMRI dataset demonstrate that our approach achieves state-of-the-art performance, particularly under high acceleration factors, effectively bridging the gap between zero-shot learning and supervised methods. The code is available at https://github.com/Zolento/NS-SSL.

Real-world image super-resolution (SR) is often designed with a single restoration objective, despite the current capacity of generative models to produce multiple high-quality reconstructions for the same input. In this paper, we argue that the best restoration strategy is subject to the specific restoration profile: a Faithful restoration prioritizes reference consistency, structure preservation, and hallucination suppression, whereas an Aesthetic restoration prioritizes visually pleasing and natural-looking details. We propose FoA-SR, a novel preference optimization approach to real-world SR based on profiles. To achieve this goal, FoA-SR starts with our supervised FLUX.2-based SR adapter (Flux2SR) trained with LR latent conditioning, flow matching, and image-space reconstruction losses for paired LR-to-HR image super-resolution. Following the development of the shared supervised super-resolution adapter, FoA-SR generates a shared stochastic candidate pool for each input image and ranks the same candidates using profile-specific Faithful and Aesthetic rewards to mine winner-loser pairs. These pairs are used to fine-tune separate LoRA adapters while keeping the base model frozen. Experiments on RealSR and DIV2K show that FoA-SR can steer the same SR adapter towards distinct restoration objectives: a Faithful adapter improves reference-consistent metrics while an Aesthetic adapter boosts metrics that measure perceptual quality without reference. Our candidate-pool analysis shows that Faithful and Aesthetic rewards frequently select different winners, and a Hybrid-LoRA ablation shows that collapsing both profiles into one reward yields an implicit compromise rather than explicit profile control.

Diffusion-based generative models have achieved remarkable success in real-world image super-resolution (SR). With tiled diffusion techniques, these models can produce high-resolution images that exceed their native-supported resolution. However, the quality of such high-resolution (e.g $2048^2$) outputs often remains extremely poor, primarily due to two factors we consider: the image upsampling ratio (e.g $\times8$) exceeding the model's native-supported upsampling ratio (e.g $\times4$), and the model's native-supported resolution. In practice, training a native high-resolution model requires larger architectures, which incur significant computational overhead and GPU memory costs, making it hard on limited-resource equipment. Thus, we present TUDSR, a Twice Upsampling-Diffusion framework for higher SR. The TUDSR framework mainly consists of two stages: the first involves training at $R$-resolution, and the second introduces a looped chunk-based training strategy at $NR$-resolution. Each stage adapts a one-step GAN architecture comprising a generator and a discriminator. Based on SD2.1-base, we develop TUDSR-S, which achieves state-of-the-art performance across multiple benchmarks. Extensive experiments further demonstrate that TUDSR-S generates high-quality images at the resolutions of $1024^2$ and even $2048^2$, significantly outperforming existing approaches. Code is available at https://github.com/wuer5/TUDSR.

Real-time video restoration (VR) for live streams requires high-resolution outputs under strict per-frame latency constraints. Existing one-step diffusion-based VR models remain difficult to deploy on consumer-grade GPUs due to two main bottlenecks: quadratic spatial attention at high resolutions and the latency-memory overhead of large video autoencoders. We present SwiftVR, a streaming one-step generative VR framework that reduces both bottlenecks under a causal chunk-wise protocol. For attention, mask-free shifted-window self-attention gathers each spatial window into a dense tensor via deterministic indexing, keeping all attention calls on the dense scaled dot-product attention path without masks, cyclic shifts, padding, or hardware-specific sparse kernels. Because SwiftVR uses only standard dense SDPA calls, the trained model transfers to consumer GPUs without retraining or custom kernels. For autoencoding, a lightweight Restoration-aware Autoencoder enables fast chunk-wise decoding while preserving reconstruction quality. On a single H100, SwiftVR sustains 31FPS at 2560x1440 and 14FPS at 3840x2160, whereas all compared diffusion-based VR baselines exceed the memory limit at 4K. On a consumer RTX5090, SwiftVR reaches 26FPS at 1920x1080. To our knowledge, SwiftVR is the first generative VR model to achieve real-time 1080p streaming on a consumer-grade GPU, while attaining strong no-reference perceptual quality with lower inference cost. Project is available at https://h-oliday.github.io/SwiftVR.

Methods based on implicit neural representations have demonstrated superior performance in Screen Content Image Super-Resolution (SCISR) . However, they overlooked the inherent frequency characteristics, leading to suboptimal performance. We propose a frequency decoupled framework (FDF) that rethinks SCISR from a phasor perspective by capturing structured energy in amplitude and relational continuity in phase, and jointly exploiting them with bespoke implicit representations to faithfully recover the regular textures and global configuration of Screen Content Image (SCI). Amplitude-Phase Factorization Network (APFN) first separates images into amplitude and phase streams, where Amplitude Clustering Module (ACM) organizes sparse yet high-energy amplitude responses into representative prototypes for periodic pattern extraction, while Phase Consistency Self-Attention (PCSA) progressively reinforces configuration through continuous consistency propagation. And Oscillation-Anharmonic Implicit Fitting Network (OAIF-Net) integrates periodic and coherent implicit representations for efficient exploitation of the periodic patterns and coherent context embedded in SCI. Experimental results show FDF achieves state-of-the-art SCISR performance at multiple scales across four public SCI datasets. Ablation experiments further demonstrate the effectiveness of each component in extracting and exploiting periodic patterns and coherent context.

Remote sensing applications for environmental monitoring and disaster management are frequently constrained by a spatial--temporal trade-off: imagery with fine spatial detail is often acquired less frequently, whereas more temporally available observations are typically coarser. Single-image super-resolution provides a practical means to enhance coarse imagery without changing acquisition schedules, yet many Transformer-based SR models remain computationally expensive and can be sensitive to limited or geographically biased training data, which degrades robustness under out-of-distribution conditions. This paper presents NGram-MoSE, a lightweight Transformer architecture designed to improve both efficiency and texture continuity. NGram-MoSE introduces N-Gram Context Injection to strengthen cross-window local consistency and mitigate window-boundary artifacts, and incorporates a Mixture-of-Experts (MoE) feed-forward design to scale capacity through sparse activation without proportional growth in inference cost. Experiments on a geographically disjoint OOD test set show that NGram-MoSE achieves 31.68,dB PSNR while reducing FLOPs by $14\times$ relative to a heavyweight Transformer reference. Downstream evaluation on a landslide segmentation benchmark further demonstrates that restoring degraded inputs to the detector training scale improves performance, yielding a 4.47% absolute gain in mAP@50 over bicubic upsampling, and exhibits stronger cross-scale consistency under scale extrapolation. These results indicate that NGram-MoSE provides an effective SR module for resource-constrained remote sensing pipelines requiring robust generalization.

Hyperspectral imaging provides rich spectral information for quantitative remote sensing, yet hyperspectral sensors remain costly and thus unavailable in many UAV deployments. Spectral super-resolution (SSR) seeks to reconstruct hyperspectral images (HSIs) from multispectral images (MSIs). Most existing SSR methods assume a fixed and known spectral response function (SRF) and are therefore limited to single-sensor settings. In practical cross-sensor scenarios, the spectral degradation from HSI to MSI is unknown and varies with sensor characteristics and scene content, which renders HSI reconstruction ill-posed. This paper proposes a physics-guided deep unfolding network, termed PGU-Net, to address blind cross-sensor SSR by jointly estimating the HSI and a learnable spectral transformation function (STF). PGU-Net unrolls an alternating optimization procedure into an end-to-end trainable architecture with stages, where each stage sequentially updates the HSI and the STF. Both modules combine learnable proximal networks with differentiable closed-form solvers, enabling physical interpretability while retaining strong representation capacity. Experiments on benchmark datasets (CAVE and NTIRE 2022) with multiple SRFs demonstrate accurate recovery of the STF (degradation operator) and improved reconstruction performance over state-of-the-art SSR methods. Furthermore, evaluations on a real UAV cross-sensor dataset (Headwall Nano HSI and DJI P4 Multispectral MSI) verify the effectiveness and robustness of PGU-Net under truly blind conditions, and suggest that the estimated STF may exhibit land-cover-related differences.

Vector-quantized (VQ) generative models have shown promising results in real-world image super-resolution (Real-ISR). However, existing methods typically rely on a monolithic latent space that entangles low-frequency structures with high-frequency textures. This entanglement forces a single codebook to capture a combinatorially complex set of structure-texture pairings, which constrains representational capacity and limits codebook utilization. To address this issue, we present HiTokSR, a hierarchical token prediction framework. Instead of using a single codebook, HiTokSR partitions the latent space along the channel dimension into frequency-aware groups, quantizing each with an independent sub-codebook. This coarse-to-fine design disentangles global structures from fine details, enhancing combinatorial expressiveness while circumventing the optimization instability of high-dimensional nearest-neighbor lookups. To further improve semantic consistency, our generator integrates priors from a vision foundation model via adaptive feature modulation, multi-scale class tokens, and a representation alignment loss. Additionally, we introduce an index-level perturbation strategy during decoder fine-tuning to bridge the train-test discrepancy in discrete token prediction. Extensive experiments on real-world benchmarks demonstrate that HiTokSR achieves state-of-the-art performance in both perceptual quality and reconstruction fidelity.

Real-world image super-resolution (Real-ISR) requires balancing structural fidelity to degraded observations with realistic detail synthesis. However, existing generative Real-ISR methods often rely on entangled conditioning mechanisms, leading to structural drift or semantically inconsistent details. To address this issue, we propose Visual In-Context Restoration (VICR), a Diffusion Transformer (DiT)-based framework that formulates Real-ISR as image completion. Specifically, we introduce a decoupled visual prior injection mechanism that derives local and global cues from the low-quality (LQ) image: local cues help recover image structures and support high-frequency detail synthesis, while global cues guide overall generation and promote semantic consistency. For ambiguous regions under severe degradation, VICR employs an inference-time agent to refine semantic prompts using visual evidence from the LQ input while keeping model parameters fixed. Experiments show that VICR achieves state-of-the-art performance across multiple Real-ISR benchmarks with only 127M trainable parameters.

Neural operators are often reported to exhibit zero-shot super-resolution, a phenomenon in which a model trained on coarse grids produces accurate predictions on finer testing grids without additional retraining. Despite strong empirical evidence, the theoretical foundations of this phenomenon remain unclear. In this work, we provide a systematic theoretical study of zero-shot super-resolution in operator learning. We first show that zero-shot super-resolution can be information-theoretically impossible even in benign settings such as when the input functions are available over the entire continuum and the ground truth is a simple rank-one linear operator. We then identify H{" o}lder smoothness of the output functions as a sufficient condition for zero-shot super-resolution and derive corresponding generalization bounds. Finally, we also validate the identified failure modes through experimental results.

Fine-grained time series data with high temporal resolution is critical for accurate analytics across a wide range of applications. However, the acquisition of such data is often limited by cost and feasibility. This problem can be tackled by reconstructing high-resolution signals from low-resolution inputs based on specific priors, known as super-resolution. While extensively studied in computer vision, directly transferring image super-resolution techniques to time series is not trivial. To address this challenge at a fundamental level, we propose Super-Resolution for Time series (SRT), a novel framework that reconstructs temporal patterns lost in low-resolution inputs via disentangled rectified flow. SRT decomposes the input into trend and seasonal components, aligns them to the target resolution using an implicit neural representation, and leverages a novel cross-resolution attention mechanism to guide the generation of high-resolution details. We further introduce SRT-large, a scaled-up version with extensive pre-training, which enables strong zero-shot super-resolution capability. Extensive experiments on nine public datasets demonstrate that SRT and SRT-large consistently outperform existing methods across multiple scale factors, showing both robust performance and the effectiveness of each component in our architecture.