Robotic Control

Cable-Driven Parallel Robots (CDPRs) are a type of parallel mechanism in which cables are used as actuators. Due to the two levels of redundancy and numerous constraints within the CDPR actuation, joint and operational spaces (together known as the tri-space), tracking a given trajectory in the operational space while satisfying constraints in tri-space simultaneously is challenging. To the best of the authors' knowledge, there does not exist any tri-space control framework, which is robust, effective, and directly applicable to several architectures of redundantly actuated CDPRs. This paper proposes a tri-space control framework that combines Reactive Control (RC) and Iterative-Learning Control (ILC) to perform repetitive tasks in the operational space. The framework allows the tracking of operational space trajectories online with feasible cable forces, while avoiding undesirable situations such as cable-link interference, joint interference, and loss of manipulability. On the other hand, by finding an optimal parameter in the null space using a novel parameterization of a null space vector, the performance can be improved through ILC when the task is repeatedly executed. Simulation and hardware results on various Multilink Cable-Driven Robot (MCDRs) and Hybrid Cable-Driven Robots (HCDRs) show that the proposed tri-space control framework can be conveniently and effectively applied to the real-time control of different CDPRs.

Action chunking shortens the effective decision horizon of robot imitation learning by predicting multiple future actions, while conventional phase conditioning describes the current control instant. When a predicted horizon crosses a procedural boundary, assigning the current phase to the entire chunk creates a structural temporal mismatch. We present TRACT, which factorizes phase-structured action chunking into an accepted current phase and a single CURRENT-to-NEXT boundary inside the future horizon. A task-local graph constrains chronological phase authority, and a cumulative boundary distribution monotonically routes future queries through phase-specific query and action paths. For contact execution, a causal response-deficit integrator compares policy intent with ACK-eligible subsequent motion, accumulates arm compensation when directional response is suppressed, and decays after confirmed recovery. Across six real-robot variants with ten trials each, full TRACT achieves 10/10 full-sequence success, 99.00 [88.75, 100.00]% median [min, max] wipe completion, zero observed phase ambiguity, and zero stalls. Under the current complete method package and evaluation setting, the routed representation obtains better observed task results than the flat package (6/10 vs. 3/10 success; 77.08% vs. 8.03% median wipe completion). Chronological authority reduces observed phase ambiguity from 8/10 to 0/10, and response integration reduces stalls from 4/10 to 0/10. The package comparison does not isolate routing from other generator-package differences.

Cable-driven parallel robots (CDPRs) present diverse configurations and complex control challenges, which can be addressed by deep reinforcement learning (DRL) by learning their nonlinear dynamics. However, DRL methods often require extensive training time, and the resulting policies do not generalize well to different robot configurations or varying numbers of actuators. In this article, we introduce a novel DRL approach for controlling CDPRs that does not depend on the specific robot configuration. Our method trains an actuator-level policy that controls each motor to achieve its target cable length, in contrast to conventional DRL approaches that learn to control the entire robot to reach a desired end-effector position. To the best of our knowledge, this is the first work to apply DRL to control CDPRs using an actuator-level policy. This approach offers two main advantages: (i) a single shared policy can be applied to any CDPR configuration, regardless of actuator count, and (ii) reliance on inverse kinematics, avoiding the more challenging forward kinematics problem. Training is performed in simulation, and the learned policy is successfully transferred to a real CDPR. Experimental results show that the actuator-level policy (ALP) surpasses traditional reinforcement learning methods in both robustness and precision. We further control a real 8-motor CDPR with 3D motion using a policy trained on a simulated 4-motor planar CDPR operating in 2D. This illustrates that the proposed method is applicable to any CDPR configuration, independent of actuator number or placement.

In the physical world we inhabit, space and time are fundamentally continuous. However, existing machine learning paradigms for world modeling are largely confined to discrete-time prediction, thereby exhibiting significant inefficiency in capturing the dynamics of physical world. We introduce Physical-Time Flow (PT-Flow), a novel approach that learns a continuous latent velocity field operating in physical time. Crucially, the underlying dynamics of sequential data are parameterized by an ordinary differential equation (ODE) embedded in a well-structured representation space. Under this paradigm, the prediction of future can be recast as temporal integration via an ODE solver in the compressed latent space. Building upon PT-Flow, we construct ODEWorld, a continuous-time latent world model that is both efficient and versatile. By extracting time-variant features and enforcing ODE properties on both the dynamical representation space and the latent velocity field, ODEWorld effectively addresses the long-standing representation collapse issue in latent world model literature. This also enables high-quality image reconstruction even after long-horizon prediction. Moreover, its continuous nature allows for arbitrary temporal resolution and even backward prediction, which is impossible for most discrete-time models. Lastly, ODEWorld can provide rich planning-oriented information to facilitate downstream policy learning. Comprehensive experiments demonstrate that ODEWorld successfully reconciles planning-conducive dynamics abstraction with visual realism, excelling in both video generation and robotic control. Project page: https://odeworld.github.io/.

At parking speeds, the kinematic bicycle is the prevailing model for car-like vehicles. Yet, despite its wide use, stabilizing feedback laws for this system are scarce in the literature, and existing designs often do not reproduce realistic parking maneuvers. This limitation is inherent to the Cartesian coordinates, where Brockett's condition rules out smooth static feedback stabilization. We bypass this obstruction by transforming the system into polar coordinates together with additional range-normalized coordinates that encode the geometry of human-like parking maneuvers. In the transformed coordinates, the dynamics take a strict-feedback form, enabling a nonconventional backstepping design. We exploit the particular structure to develop smooth feedback laws that achieve global exponential stabilization in the transformed coordinates which in turn generates parking trajectories resembling the one performed by human drivers through feedback alone.

Cable-driven manipulators exhibit strong nonlinearities and low structural stiffness, which make precise control challenging under time-varying uncertainties and external disturbances. This paper presents a time-delay-estimation (TDE)-based adaptive fractional-order nonsingular terminal sliding mode (AFONTSM) control strategy for cable-driven robots. A robust controller is constructed within a TDE-based model-free framework by combining fractional-order nonsingular terminal sliding mode error dynamics with a fast terminal sliding mode reaching law. The main contribution is a new adaptive law that introduces an adaptive exponential term into the update gain to form a nonlinear adaptive mechanism. This design improves adaptive regulation under different operating conditions by suppressing noise-induced chattering during smooth tracking while preserving or enhancing the adaptive gain during trajectory reversal. Lyapunov analysis proves the ultimate uniform boundedness of the tracking error. Experimental results show that, compared with the baseline method, the proposed controller reduces RMSE by 34.52% and 31.11%, ITAE by 33.79% and 32.97%, and ISCT by 6.69% and 17.77% for the two joints, respectively. Further comparisons with recently reported adaptive laws demonstrate that the proposed law provides faster adaptive response, more stable gain evolution, and improved chattering suppression. Additional payload tests further verify the robustness and repeatability of the proposed method.

Generalist manipulation policies increasingly take the form of action-chunking flow policies built on large pretrained backbones. Such chunks run open-loop, so the policy cannot react to sensory input arriving mid-execution, sacrificing \emph{reactivity}. Replanning more often would restore it, but the perception-to-action pipeline (a large backbone plus multiple denoising steps) is too slow: this \emph{latency} forbids frequent replanning and leaves committed actions stale, making such policies ill-suited for dynamic, closed-loop control. We present $π\mathbf{R}^2$, which makes these policies reactive and real-time while retaining large backbones, expressive multi-modal policies, and multi-action prediction. Built on the per-position noise schedule of diffusion forcing, $π\mathbf{R}^2$ contributes two ideas. First, it splits conditioning into a fast channel (proprioception, fresh every tick) and an asynchronously updated slow channel (vision-language features), so the policy reacts to proprioception within a chunk while tolerating stale vision. Second, a latency-adaptive flow schedule treats in-flight actions as inpainting conditioning and emits actions in one denoising step per call, letting one trained model adapt to varying hardware latency. Requiring minimal modification to existing architectures, $π\mathbf{R}^2$ can be finetuned from a pretrained policy: applied to GR00T-N1.7 on a real xArm6+XHand platform, it replans closed-loop roughly $4\times$ faster than the base policy (~$25$Hz on an A5000 GPU), acting on a fresh observation every $40$ms. Across simulation and real-world manipulation tasks, $π\mathbf{R}^2$ improves the success rate by up to $23\%$ in simulation and $30\%$ in the real world over the strongest baseline. Project page: https://pi-r2-flow.github.io/

Electric joint systems are significant elements of an underwater manipulator for its actuation, drive, and control. Working in an underwater environment, the joints suffer huge ambient pressure. To withstand it, the pressure compensation method is usually deployed, whereas the pressurized oil introduces sealing problems as well as parametric uncertainties and unknown disturbances for the dynamic model of the joint. To tackle these issues, this study proposes a design framework for the underwater oil-filled electric joint. The dynamics of the pressure compensation module is analyzed and the structure of the joint is optimized to seal the internal hydraulic oil. An uncertainty dynamic model of the oil-filled joint is established and a robust position controller is designed based on the structured singular value synthesis (mu-synthesis). Experimental results validate the feasibility of the proposed methods.

Autonomous free-flying robots in orbital environments require controllers that are both versatile and resource-efficient, yet maintaining a separate, task-specific policy for each mission profile is architecturally brittle and limits operational flexibility as requirements evolve. We introduce HYPER-GNC, a multi-task reinforcement learning framework in which a hypernetwork maps physics-informed task embeddings to the weights of a shared actor-critic policy, enabling a single compact controller to master four distinct GNC tasks: velocity tracking, docking, inspection, and navigation with obstacle avoidance. The continuous embedding space allows the controller to generalize to novel mission configurations at deployment time without any retraining. Extensive experiments demonstrate that HYPER-GNC achieves sample efficiency comparable to single-task specialists while maintaining stability under significant inertial perturbations and external body wrenches. We further validate the framework on a physical satellite emulator, successfully bridging the simulation-to-reality gap across all mission profiles. Code, trained models, and deployment scripts are made publicly available to support reproducibility.

Bridging the sim-to-real gap is a central problem in robotics, and the prevailing approach is to build increasingly accurate simulators. Here, we propose another approach based on renormalization: using effective, resolution-dependent parameters to absorb details omitted by the simulator and reproduce real behavior. These parameters may differ from measured physical values because they compensate for what the simulator leaves out. We demonstrate this mechanism analytically for proportional--derivative (PD) control at finite simulation frequency, where proportional feedback changes the effective derivative gain and derivative feedback changes the effective inertia. We then interpret dynamic rope manipulation and underwater swimming through the same perspective. Finally, we present a practical procedure for choosing observables, identifying omitted physics, and determining effective parameters. Renormalization offers robotics a complementary path across the sim-to-real gap: effective parameters, real behavior.

Operating constrained dynamical systems requires controllers to efficiently solve complex tasks while enforcing recursive feasibility and physical constraints. To address these competing requirements, we present Feasible Action for Optimal Control (FAOC), a novel control framework integrating Reinforcement Learning (RL) and Optimal Control (OC). The core contribution is a computationally efficient, optimization-based mapping algorithm that transforms the RL agent's action from a static abstract set into a state-dependent feasible parameter set of the Optimal Control Problem (OCP), guaranteeing instantaneous parameter feasibility. When paired with invariant terminal sets, FAOC guarantees strict recursive feasibility and safe operation, effectively combining the predictable safety of OC with the behavioral flexibility of RL. Unlike prior work, the abstract action space does not require expert tuning, nor is the OCP formulation compromised by the inability of RL to guarantee feasibility. We evaluate FAOC on real-time motion planning for robot table tennis, where simulated experiments demonstrate superior sample efficiency and closed-loop performance compared to state-of-the-art baselines. We open-source the used implementation of the mapping algorithm and OCP for motion planning https://github.com/SonyResearch/feasible_action_for_optimal_control.

Control methods for emerging vehicle chassis architectures are important for autonomous driving near handling limits. Unlike conventional drift control, which relies on mechanical steering and rear-tire saturation, a steering-free four-wheel independently driven (4WID) vehicle can generate direct yaw moment through differential wheel torques. This paper proposes a differential-torque drift control method for such a vehicle. A double-track vehicle model incorporating four-wheel differential actuation is established, based on which a drift-equilibrium calculation method and a closed-loop drift controller are developed. The proposed approach is validated through simulations and experiments on a 1:10-scale vehicle. The results show that the vehicle can achieve steady circular drifting with a sideslip angle of approximately 20$^\circ$ and perform figure-eight drift tracking. This study demonstrates the feasibility of drift control using only differential wheel torques and provides a new perspective on near-limit control for steering-free vehicle architectures.

Approaching a target position and holding station in flowing water is a fundamental and critical capability for robotic fish operating in natural aquatic environments. Despite decades of advances in enhancing swimming efficiency and maneuverability, this capability remains underdeveloped, largely owing to the insufficiently characterized, highly nonlinear fluid-structure interactions inherent to freely swimming robotic fish in flows. To bridge this gap, we propose the SWiFT framework, a Swimming With Flow Toolbox that enables the efficient exploration of an egocentric station-holding policy for a body and/or caudal fin (BCF) robotic fish in unknown and turbulent background flows via reinforcement learning (RL). Our SWiFT integrates a free-swimming flow-tank experimental setup with a highly efficient, physically consistent computational fluid dynamics (CFD)-based simulator and a systematic sim-to-real transfer pipeline. The resulting policy achieves substantial improvements over state-of-the-art methods across all metrics, most notably root-mean-square error (RMSE) of distance. Furthermore, we validated that egocentric feedback alone, without any explicit flow sensing, enables station-holding in unknown turbulent flows, closely mirroring the biological phenomenon of rheotaxis. Accordingly, the success of this egocentric station-holding policy not only advances robotic fish control toward real-world deployment, but also highlights SWiFT's promise as a foundation for tackling complex swimming tasks for underwater robots.

Robot policies are typically MLPs mapping observations to actions. Yet robot observations are physical variables, and many action-relevant cues arise not from individual variables but from their interactions; power, inertial effects, contact, slip, and compliance depend on products among observable signals. We introduce PRISM, a policy representation that makes polynomial interactions among observable physical variables explicit, learnable, and compact. Rather than listing all polynomial terms, PRISM uses a factorized polynomial module to expose higher-order interaction features efficiently. In reinforcement learning, it keeps the standard MLP backbone but applies a gradually activated element-wise polynomial function after it. In imitation learning, it replaces linear proprioceptive conditioning in Diffusion Policy with a polynomial layer trained end-to-end. Across humanoid locomotion and contact-rich manipulation, PRISM improves performance over standard MLP policies and larger MLPs with matched capacity, showing that interaction structure cannot be replaced by capacity alone. It also yields sensorless compliant behavior without force, wrench, tactile input, contact labels, or admittance control. These results suggest that polynomial representations should become a standard architectural choice for embodied motor control. The project page is available at https://lsh3163.github.io/prism/

The paper proposes a robot-agnostic compliant-control framework that extends the ROS control ecosystem with standardized joint and Cartesian command interfaces. It addresses a key limitation of existing control software: no reusable infrastructure for implementing compliant-control algorithms across different manipulators while preserving a common interface to higher-level applications. A plugin-based architecture separates controller infrastructure from control-law implementation. Generic wrappers use existing hardware abstractions to interface with different manipulators, while runtime-loaded plugins implement only the control law. Command interfaces support joint- and Cartesian-space references, stiffness and damping gains, nullspace targets, and feedforward terms, enabling variable impedance and diverse compliant-control formulations. Robot kinematics and dynamics are computed from URDF models using Pinocchio. The architecture facilitates the development of compliant-control strategies and enables the same implementation to be deployed across platforms unchanged. The complete framework, including reference controllers, high-level task interfaces, and example configurations for various manipulators, is open-sourced. The reference Cartesian impedance controller supports task-dependent compliance by rotating translational and rotational stiffness and damping, allowing the principal compliance directions to be updated online according to local task geometry rather than remaining fixed in the robot base or TCP frame. This is particularly important in contact-rich manipulation, where the desired directions of motion, constraints, and compliance directions may vary throughout task execution. Real-robot experiments demonstrate task-dependent compliance in contact-rich manipulation, while simulations show portability across manipulators with distinct kinematic and dynamic characteristics.

Autonomous robotic craniotomy requires continuous regulation of tool-tissue interactions to mitigate mechanical overload and thermal damage while maintaining surgical efficiency. However, this process is inherently partially observable due to unknown, time-varying tissue properties and the inability to directly measure cutting temperatures under physical occlusion. To address these challenges, we propose RL-MACRO, a cybernetic closed-loop intelligence framework that couples multimodal perception, adaptive decision-making, and robotic execution. This framework empowers the surgical robot to autonomously perceive inaccessible states from partial sensory feedback and dynamically optimize its behaviors under uncertain environment. A CNN-LSTM observer first fuses force and sound feedback to reconstruct the hidden temperature state (R^2=0.939, MAE = 1.717 deg C). This reconstructed temperature, alongside multi-sensor features, forms the belief state for an offline Implicit Q-Learning (IQL) policy. A novel dual-head Actor dynamically coordinates the feed rate, spindle speed, and cutting depth to optimize efficiency within strict safety bounds. These decisions are seamlessly translated into spatial motions via online trajectory re-planning and velocity servoing. Experiments on bovine ribs and six ex vivo goat skulls validate the system's robust perception, adaptive recovery from force/temperature excursions, and smooth execution on irregular surfaces, establishing a data-driven cybernetic paradigm for safe and efficient autonomous bone cutting.

Manual craniotomy is a high-risk, skill-dependent procedure associated with surgeon fatigue and potential dural injury. While robotic approaches have improved safety, existing open-loop systems rely solely on preoperative images and cannot compensate for intraoperative registration errors or tissue deformation. To address this, we propose a human-inspired closed-loop robotic craniotomy framework that intelligently integrates preoperative planning with intraoperative execution. An adaptive dual-contour fusion algorithm is employed to generate trajectories that conform to complex cranial geometries while maintaining a consistent tool-bone relative pose. For intraoperative perception, a multimodal two-stage cross-modal attention block (CMA)-temporal convolutional network (TCN)-Transformer network combined with an adaptive Bayesian filter fuses force and acoustic signals to achieve robust breakthrough detection under varying bone conditions. Upon detection, an in-situ projection-based trajectory adjustment strategy dynamically compensates for depth deviations, enabling safe residual bone isolation. Experiments on bovine ribs show a breakthrough prediction accuracy of 97%, a detection latency of 0.048 +/- 0.097 s, and a maximum overshoot of 0.29 mm. All four ex vivo cranial experiments were successfully completed without dural injury. These results demonstrate that the proposed cybernetic framework enables safe and autonomous craniotomy with highly effective closed-loop control.

Learning-based manipulation policies usually predict robot actions from sensory observations and leave their execution to a separate low-level controller. In rigid contact, this separation can be problematic: the same motion to a virtual target or compliant motion command can lead to unstable contact, tracking error, excessive loading, or tool damage, depending on the low-level controller. In this paper, we propose a \textit{Unified Robot Control-Policy Framework} (URF), which connects compliant action prediction with unified impedance-admittance control. Given multimodal observations, URF predicts a virtual target, a stiffness matrix, and an impedance-admittance switch ratio. The switch ratio determines when the controller should behave more like admittance control for accurate motion tracking and when it should move toward impedance control for safer rigid contact. Because demonstration data do not provide ground-truth environment stiffness, we construct switch-ratio labels from measured contact forces and use them to supervise controller-mode prediction. Across box-flipping and line-pressing tasks, URF achieves higher task success rates while reducing failure modes observed with admittance-only execution, including rapid force buildup, large force oscillations, tool breakage, and robot safety stops. These results suggest that contact-aware policies benefit from predicting not only compliant actions but also the controller behavior used to execute them. Project page: https://jiyou384.github.io/urf_project_page/

Limbless robots offer exceptional mobility in confined and cluttered environments due to their slender bodies and their ability to exploit body-terrain interactions. Recent designs incorporating compliance demonstrate robust locomotion without complex sensing or control; however, these systems typically rely on fixed body configurations, with each morphology specialized for a single locomotion mode or environment. This raises a key challenge: how can a single limbless robot achieve versatile locomotion while preserving the robustness of compliance-mediated locomotion? To address this challenge, we present a cable-driven limbless robot that reconfigures body morphology and compliance to enable diverse locomotion modes. Distributed cable actuation generates traveling body waves, while programmable passive compliance enables robust contact-rich locomotion without terrain knowledge or high-bandwidth feedback. Rolling joints reorient bending planes along the body, enabling rapid reconfiguration and smooth transitions between locomotion styles, and incorporate geared locking to maintain configuration without continuous power. By combining programmable bending compliance and morphology control, the platform achieves lateral undulation, sidewinding, rolling, and twisting within a single system. Experiments demonstrate reliable gait generation, traversal in obstacle-rich environments, and transitions between modes, establishing a versatile limbless platform for navigating complex environments with applications in search and rescue, environmental monitoring, and inspection.

Haptic feedback provides an implicit channel for communicating safety intentions during human-robot shared control. Existing haptic guidance systems typically employ predefined intervention strategies that cannot accommodate the diverse safety preferences of individual users or application scenarios. To address this limitation, we propose a Learning from Haptics (LfH) framework that learns user-preferred safety interventions from sparse demonstrations, eliminating the need for manual trial-and-error design. Our framework is built on a differentiable Control Barrier Function (CBF)-based optimization layer that automatically adjusts the underlying safety parameters to match the demonstrated haptic responses. Instead of tuning controller parameters directly, users teach the system how they expect it to intervene during teleoperation. The resulting haptic guidance reflects the demonstrated intervention preferences while preserving the intuitive interaction of haptic shared control. Simulation and hardware experiments demonstrate that the proposed framework can learn personalized safety interventions from sparse user input and reduce the mismatch between the generated haptic feedback and the demonstrated preferences.

Vision-based heading prediction is useful for UAV--UGV cooperation, but accurate prediction alone does not guarantee that every predicted heading should be issued directly as a control command. This paper investigates the decision problem of when and how a fixed vision-based heading predictor should be trusted for command issuance. A lightweight confidence-gated framework is proposed in which execution decisions are made using two interpretable reliability proxies derived from the perception stream: bounding-box area as a visibility-related proxy and short-window variation in predicted heading as a stability-related proxy. During low-confidence intervals, the framework compares the baseline freeze-HOLD policy with a bounded-blend fallback that updates the issued command conservatively. The method is evaluated on a real UAV--UGV dataset under clean and perturbed conditions. The results show that confidence gating creates a clear trade-off among execution rate, executed-frame accuracy, issued-command accuracy, and smoothness. The results further show that sparse execution can cause severe stale-command error under the baseline freeze-HOLD policy, whereas the bounded-blend fallback substantially improves command-level behavior under the same gate decisions. These findings highlight that reliable perception-driven autonomy depends not only on prediction accuracy, but also on decision-aware command issuance during low-confidence

Robot sensors and electronic equipment are prone to failure in harsh environments. With water hydraulic drive, thin and long tubes enable remote operation without actuator-side sensors. Furthermore, the elasticity of the tubes reduces the impedance of the joints (actuators), benefiting robot tasks involving unexpected contact with the environment or vibrations. However, owing to the low impedance and limited camera visibility, accurately positioning the joint (or end effector) to the target location under varying load conditions is challenging. This study proposes a novel method that employs water-filled flexible tubes to enable the transmission of driving power and actuator-side information to and from the actuator, respectively, without actuator-side sensors. By modeling volumetric loss during transmission based on pressure fluctuations and incorporating minor air entrapment, simultaneous power transmission and position estimation is achieved through a tube up to 50 m. Thus, it becomes possible to use a feedback control framework that was previously difficult to implement in sensorless systems. Experimental validation confirms stable position control of a sensorless water hydraulic cylinder under varying loads. Furthermore, a field parameter-identification method accounts for tube and air entrainment variability without requiring actuator-side sensors. These contributions promote reliable remote control of robots in harsh environments.

This paper presents a method for user-driven robot Learning from Demonstration (LfD) that reduces user effort while ensuring compliant and precise reproduction. The method eliminates repeated teaching for the same task and enables real-time learning from a single demonstration. Demonstrated motions are reproduced with high precision, while impedance variations are learned in real time to provide both compliance and robustness against perturbations. This mitigates potential safety issues in Human-Robot Interaction (HRI) that arise from conventional time-indexed trajectories lacking compliance. The proposed approach integrates a three-dimensional (3D) Fast Diffeomorphic Matching (FDM) algorithm with a Dynamical System (DS)-based motion generator to achieve real-time single-shot demonstration learning and reproduction. An Extended Kalman Filter (EKF) framework compensates for reproduction errors and recovers from external interactions. Furthermore, an impedance parameterization function is incorporated to learn impedance variations from demonstrations and maintain surface contact for specific applications. The proposed approach is validated through comprehensive experiments on a 7 Degree-of-Freedom (DOF) KUKA LWR IV+ robot.

Fish-like swimming has inspired the design of several dozens if not hundreds of bioinspired robots in the last few decades. But the control and motion planning of such robots has been challenging due to the poorly modeled fluid-structure interaction and the nonlinear underactuated dynamics of such robots. While reinforcement learning has allowed significant advances in the context of ground and aerial robots, the lack of a suitable simulation environment with appropriate computational speed and accuracy have prevented similar progress for fish-like robots. We address this two-fold problem by developing a simulation platform that approximates the motion of our fish-like robot with computational efficiency. Then the motion control and path tracking by the robot is performed using PID control where the (variable) gains are learned using back propagation through time and training on a curriculum. The policy learned in the simulation is then applied on the physical platform, demonstrating an excellent match.

Real-time collision avoidance for robotic manipulators requires fast reactions to unexpected obstacle motion and lookahead to avoid becoming trapped by near-future constraints. Full model predictive control can provide this foresight, but its online cost may grow quickly with horizon length, model fidelity, and the number of active geometric constraints. Conversely, horizon-free reactive methods are computationally efficient but can be short-sighted in dynamic clutter. We present a task-space receding-horizon controller that uses a short contact-consistent rollout to generate a terminal kinematic reference satisfying internal non-penetration constraints, then computes only the first input of a smooth minimum-acceleration transition toward that reference. Starting from a closed-loop inverse-kinematics regulation law, the rollout is performed with an iterative dynamics solver operating on inflated convex robot and obstacle geometries, so that robot-obstacle contacts, dynamic obstacle motion, and self-collisions can shape the terminal reference without requiring full constrained trajectory optimization. We analyze the contact-inactive closed loop and show local exponential task-space regulation under standard regularity assumptions. For contacts activated inside the rollout, we characterize the corresponding discrete updates and bound the effect of moving obstacles on regular operating sets. Simulations on a 40-DOF multi-chain system show that intermediate horizons balance anticipation, responsiveness, and computational cost. Hardware experiments on a 6-DOF platform demonstrate consistent sim-to-real behavior without accurate inertial parameter estimation, and comparisons against dynamic optimization fabrics and model predictive control (MPC) baselines show improved success rates in dynamic clutter while preserving solve times compatible with real-time execution in the tested regimes.

Language-conditioned quadrotor flight requires a policy to ground semantic goals, anticipate the visual consequences of ego-motion, and output control references that remain smooth and dynamically executable under rapidly changing first-person views. Existing aerial vision-language navigation and vision-language-action methods commonly use discrete actions, high-level waypoints, or instantaneous velocity commands, which provide limited supervision about how flight actions change future observations. We present AeroAct, an action-centered world-action model (WAM) for quadrotor navigation. To the best of our knowledge, AeroAct is the first WAM instantiated and demonstrated for real-world aerial flight. The model adapts a pretrained video diffusion Transformer to predict local trajectory-action chunks from egocentric visual history, proprioception, and language. Future first-person frames are used during training as dense consequence supervision, while deployment directly decodes actions without generating future video. To obtain aligned visual, state, language, and dynamically feasible action data, we build a DiffAero-based pipeline with complementary Isaac Lab and 3D Gaussian splatting renderers. We further introduce a low-cost handheld collection device that couples camera observations with motion estimates to recreate flight-like egocentric trajectories, and a self-guidance procedure that improves temporal consistency across overlapping trajectory chunks. Closed-loop simulation and real-world experiments show that temporal visual context improves target tracking and object-search performance, and that WAM-based policies can be executed on a physical quadrotor.

Reinforcement Learning (RL) has demonstrated remarkable capabilities for solving complex robotic control problems, but its lack of safety guarantees severely limits deployment on hardware. In particular, as legged robots and manipulators often operate near safety-critical boundaries, out-of-distribution states can lead to failure upon deployment. To address this, we introduce Acc-CBF-QP, an acceleration-based Quadratic Program (QP) safety filter using Control Barrier Functions (CBFs) that constrains any RL policy onto a safe set at runtime without modifying training. The method applies to unconstrained and Safe-RL policies, and enforces joint position, velocity, torque, and collision constraints within a unified optimization framework. A key contribution is the formulation of RL+QP tasks that regulate deviation from the RL command when constraints would otherwise be violated. We introduce a TorqueTask, minimizing torque deviation, and a Forward Dynamics Task, minimizing induced acceleration deviation, thus providing principled control over safety-performance trade-offs. Experiments on a 7-DoF Kinova Gen3 manipulator and a 19-DoF Unitree H1 humanoid, both in simulation and on hardware, highlight substantial reductions in constraint violations. On the real H1 hardware, a Safe-RL policy alone yielded 10.04 violations/s, which were reduced by 92% to 0.80 violations/s when augmented with Acc-CBF-QP. On the Kinova Gen3, Acc-CBF-QP fully eliminated violations. Nominal task performance of the RL objective is preserved in violation-free regimes. Under aggressive velocity commands on H1, Acc-CBF-QP improves execution by preventing constraint-induced shutdowns, yielding longer survival times. The full pipeline is open-source.

Pretrained vision-language-action (VLA) policies provide strong language-conditioned manipulation knowledge, but they remain largely vision-driven and can struggle once manipulation enters contact states where the scene is occluded, depth is ambiguous, or small force errors push execution off the offline demonstration distribution. We present LIFT (Late Reactive Injection of Force for VLA Post-Training), a force-aware post-training framework that adds contact reactivity to a pretrained VLA policy while preserving its general manipulation knowledge. LIFT grafts a reactive action expert beside the original action expert, initializes it from pretrained action weights, and injects recent 6D end-effector force through causal force memory and zero-initialized cross attention, enabling actions to be refreshed during execution. To address the policy-dependent distribution shift of contact feedback, LIFT further couples reactive force injection with an online DAgger loop that trains on a mixture of offline task-alignment data and human-corrected online rollouts. Across towel folding, book insertion, and Hanoi ring placement, LIFT learns faster and reaches higher performance than vision-only post-training, while ablations show that reactive force memory and online corrective data are both important for robust contact-rich manipulation. Our code is publicly available at https://github.com/y-wng/lift.

Recent advances in humanoid robotics and reinforcement learning have enabled the acquisition of highly expressive whole-body motion policies. However, most robotic performances remain based on pre-scripted sequences or externally triggered behaviors, limiting autonomy and responsiveness to dynamic environments. In this work, we introduce a novel multi-modal orchestration framework for semantic audio-driven humanoid control, enabling robots to autonomously select and execute appropriate motion skills in real time. The system processes continuous audio streams and routes them into music or speech branches. Music input is handled via audio fingerprinting and semantic embeddings to retrieve track identity and temporal alignment, allowing dynamic mapping between musical segments and motion policies. Speech input is grounded into a discrete library of imitation-learned skills, enabling direct human-robot interaction. Both modalities share a unified interface that schedules skill execution over a reinforcement learning control pipeline. We validate the approach in simulation and on a Unitree G1 humanoid, showing robust sim-to-real transfer and consistent audio-conditioned policy selection. Supplementary materials are available at the following site: https://lab-rococo-sapienza.github.io/semantic-WBC/

Model-based control of flexible joint robots with position-controlled actuators relies on accurate knowledge of the joint compliance. In practice, precise stiffness models are often unavailable as the properties of physical elastic elements vary with operating conditions and slowly change over time due to wear and aging. To improve model-based control of these systems, we propose an adaptive control approach in this work, which updates an estimate of the uncertain, nonlinear torque-deflection relation of each joint. As opposed to classical adaptive control approaches for non-elastic robots, we rely on an implicit control law and a control-input-dependent regressor matrix to account for the uncertain joint stiffness. We analyze robustness of the approach against errors induced by the motor position controller. Experimental results on a flexible joint with nonlinear stiffness characteristics demonstrate the effectiveness of the proposed approach.