Scientific Workflow Automation

As scientific workflows shift from deterministic executables to LLM-based agents, the development practices on offer, such as fine-tuning, reinforcement learning, and prompt-and-go, bury the scientist's judgment. We propose treating agent construction as a workflow stage and introduce AgentBuild, which builds a scientific agent from a contract the scientist authors. The contract is a version-controlled rubric, a difficulty-graded curriculum, and a curated external knowledge base. A rubric-driven judge gates a meta-optimizer coding agent that edits the agent within a declared boundary, so the build compiles the agent, not the scientist's judgment. We instantiate this for Rietveld refinement of X-ray diffraction data through GSAS-II behind MCP and A2A, where a blank-harness construction run progresses through a lithium lanthanum zirconium oxide (LLZO) signal-to-noise ladder, reaches the 4 hour scan as a frontier case, and exposes the workflow-scope limits that remain. The same rubric that rewards credible fits also scores trajectory scope, making the frontier a contract failure rather than a pattern-fitting failure. As base models evolve, re-running AgentBuild is a re-tune, not a rebuild, and the scientist's authored contract remains the durable asset.

The Coupled Model Intercomparison Project Phase 6 (CMIP6) has generated thousands of peer-reviewed publications documenting model configurations, evaluation procedures, emergent constraints, and projection uncertainties. As the community transitions toward CMIP7, efficiently extracting and operationalizing this unstructured knowledge alongside live data analysis represents a critical bottleneck. Here we present CMIP-Forge, a hybrid retrieval-augmented generation (RAG) and autonomous analysis system that bridges the gap between scientific literature and Earth System Grid Federation (ESGF) data archives. The system pairs a curated corpus of 6,581 CMIP6-related open-access publications (101,828 indexed chunks) with an agentic pipeline in which a tool-augmented worker plans and executes Python workflows over live climate data, while a panel of independent reviewer models audits its methodology end to end. CMIP-Forge introduces a multi-layered Defense-in-Depth architecture that enforces physical and methodological invariants through executable mechanisms: Abstract Syntax Tree (AST) static analysis, audited scientific primitives, and an autonomous adversarial peer-review protocol. We demonstrate the system's capabilities through end-to-end autonomous research pipelines spanning atmospheric teleconnections, ocean dynamics, regional extremes, and global warming projections. An agentic analysis system grounded in peer-reviewed literature, constrained by automated code guardrails, and audited by an independent adversarial review loop can complete complex climate-research workflows autonomously. The same experiments expose concrete failure modes of the review loop (sycophantic regression, REVISE verdicts that are never resolved, and the submission of stub code for review), each diagnosable from the immutable telemetry and provenance record released with the article.

High-performance computing (HPC) clusters remain the backbone of large-scale scientific computation, traditionally executing deterministic, linear pipelines optimised for predictable performance. However, the pervasive integration of artificial intelligence (AI) and foundation models into scientific research has introduced a fundamentally new computational paradigm. AI-driven workflows are characteristically iterative, data-driven, and probabilistic, introducing unique challenges regarding data gravity, heterogeneous resource management, and complex workflow orchestration. This guide provides twelve practical tips designed to help researchers design efficient, scalable, and reproducible AI-driven HPC workflows. By addressing critical system-level bottlenecks - such as containerisation for environment portability, strategic deployment of job arrays, explicit feedback loop mechanics, and I/O optimisation for small files - this article offers a framework for transitioning from rigid execution pipelines to adaptive, intelligent computational environments. While these architectural principles are broadly applicable across distributed environments, they are particularly tailored to the resource-intensive throughput demands of modern computational biology.

Agentic AI tools offer a promising path to automating software development bottlenecks in scientific research pipelines, particularly for stages that take domain experts days to months to build, where scientists care about correctness and robustness, not implementation details. We present an empirical study of general-purpose coding agents on a fly optogenetics data-to-discovery pipeline. We assess agents on tasks substantially larger than existing benchmarks, datasets orders of magnitude bigger, and evaluation criteria grounded in domain expert standards. We show that agents can solve several individual pipeline stages, suggesting stage-level automation is tractable. By analyzing agents' code iterations, we show that they struggle most when there is not a pre-defined criterion to iterate on, and they must instead use their scientific judgment to assess their current solution, a key open challenge. Mirroring scientific practice, they sometimes attempt visual inspection of intermediate outputs for self-evaluation, but largely fail to interpret what they see or act on it appropriately. Solving the end-to-end pipeline correctly requires stringing together successes across all pipeline stages, and this is beyond agents' current abilities. We identify challenges largely absent from existing benchmarks, including computational resource management and generalization to large held-out data collections. Finally, we distill principles for constructing scientific tasks and rigorous evaluation criteria for open-ended problems.

Biomedical agents promise to automate complex biological workflows, yet current systems face two fundamental bottlenecks: bioinformatics tools are highly heterogeneous in interfaces and execution environments, while agent planning still relies on flat prompt-retrieved tool descriptions. As biomedical software ecosystems grow, this coupling between tool coverage and context size leads to tool confusion, unstable planning, and inefficient execution. We introduce BioManus, an MCP-native biomedical agent built on graph-scaffolded planning over structured biological capabilities. BioManus first introduces the BioinfoMCP Compiler, which converts heterogeneous bioinformatics software into standardized MCP servers, yielding a large executable MCP ecosystem. It then organizes this ecosystem as a typed heterogeneous MCP graph over tools, operations, datatypes, and workflow stages. At inference time, BioManus retrieves compact task-specific subgraphs, synthesizes operation-level workflow scaffolds. This design decouples planning complexity from raw tool inventory size, achieving a context compression ratio of Theta(N / (h * m_bar)) under high-recall retrieval, where N is the total tool count, h is the workflow horizon, and m_bar (much smaller than N) is the average number of candidate tools per operation. Experiments on BioAgentBench and LAB-Bench show that BioManus improves execution accuracy, workflow validity, and context efficiency over advanced biomedical agent baselines. This work suggests a paradigm shift: scalable biomedical reasoning requires structured executable capability graphs rather than increasingly larger prompt-level tool retrieval.

Systematic reviews rely on forest plots to synthesise quantitative evidence across biomedical studies, but generating them remains a fragmented and labour-intensive process. Researchers must interpret complex clinical texts, manually extract outcome data from trials, define appropriate interventions and comparators, harmonise inconsistent study designs, and carry out meta-analytic computations-typically using specialised software that demands structured inputs and domain expertise. While recent work has demonstrated that large language models can extract study-level data from unstructured text, no existing system automates the complete pipeline from raw documents to synthesised forest plots. To address this gap, we introduce AutoForest, the first end-to-end system that generates publication-ready forest plots directly from biomedical papers. Given one or more study papers, AutoForest automatically suggests ICO (Intervention, Comparator, Outcome) elements, extracts outcome data, performs statistical synthesis, and renders the final forest plot. We describe the system architecture, user interface and demonstrate its effectiveness on real-world examples through a user study involving clinicians, showing how AutoForest can accelerate evidence synthesis and substantially lower the barrier to conducting meta-analyses.

Biological image analysis increasingly demands integration across heterogeneous tools, programming environments, and domain knowledge that few researchers can command simultaneously. We present Agentic-J, a containerised, multi-agent AI assistant, primarily for ImageJ/Fiji that enables biologists to specify analysis tasks in natural language, from nuclei segmentation and cell tracking to multi-condition quantification. The agent generates executable scripts organised into a documented project structure, so every analysis decision is traceable and the workflow can be reproduced or shared. The specialised sub-agents handle plugin management, code generation, debugging, quality assurance, and statistical reporting. In this paper we introduce the system's design, demonstrate real biological microscopy image analysis workflows, and detailed the technical implementation.

Autonomous agents are increasingly expected to support end-to-end medical-AI research workflows, moving beyond isolated prediction tasks or short-form clinical question answering. However, existing medical agent benchmarks primarily evaluate final outputs, providing limited visibility into agent behavior within the research process. To address this gap, we present AutoMedBench, a workflow-aware benchmark for autonomous medical-AI research across diverse medical imaging and multimodal inference tasks, organizing agent execution into a unified five-stage workflow (S1-S5): Plan, Setup, Validate, Inference, and Submit. It comprises long-horizon tasks with each run averaging 33 agent turns, spanning five research tracks: segmentation, image enhancement, visual question answering (VQA), report generation, and lesion detection. Each task is evaluated under two difficulty tiers, Lite and Standard, which use the same data and metrics but differ in the amount of task-brief scaffolding, and each run is scored using both final task performance and S1-S5 stage scores, enabling stage-level analysis from the initial task brief to the final submitted artifact. Across thousands of recorded runs, stage-level scoring reveals that Validate is the weakest workflow stage on average, whereas Setup is the strongest, suggesting that current agents are better at making pipelines executable than at verifying their reliability. Post-run error analysis further shows that verification and submission failures dominate tagged errors, accounting for 37.7% and 38.1% of fired codes respectively, whereas task-understanding errors are rare at 0.9%, and runs with one fired error code have a 48% lower overall score than runs with no error code on average.

Scientific research has traditionally been human-intensive, requiring researchers to coordinate literature, ideas, experiments, manuscripts, and review responses across long project cycles. The rise of LLM-based scientific agents creates an opportunity to automate this process. Such a system must support the full research lifecycle, maintain structured persistent memory across projects, and improve its own research procedures over time. However, existing systems either partially satisfy or fail to satisfy these requirements, leaving a gap for a unified automated scientific research system. As a result, we present AutoSci, a memory-centric agentic system for the full scientific research lifecycle. AutoSci is organized around four modules. SciMem provides schema-governed research memory, separating Long-Term Knowledge Memory for reusable scientific knowledge from Active Research Memory for project-level artifacts such as ideas, experiments, manuscripts, and reviews. SciFlow executes a five-stage lifecycle from literature understanding to rebuttal through a harness that controls state, context, verification, feedback, and orchestration. SciDAG augments difficult skills with DAG-shaped multi-agent operators and reusable stage-specific templates. SciEvolve converts feedback signals from users, experiments, reviews, and external environments into versioned updates to SciMem organization, SciFlow skills, and SciDAG templates. Together, these modules make AutoSci a persistent research environment that can execute, remember, and evolve across research projects. The code repository is available at https://github.com/skyllwt/AutoSci.

Finite element analysis (FEA) is the most important numerical approach for solid mechanics. Challenges of FEA include a steep learning curve for entry-level users and potential false simulations due to incorrect definitions of key simulation components, such as boundary conditions, load cases, and solution variables. Years of engineering experience are usually necessary for real-world problem-solving. To address these issues, we present AbaqusAgent, a multi-agent framework grounded in large language models (LLMs) for solid mechanics analyses. AbaqusAgent is developed to facilitate analysis case generation and execution using Abaqus, one of the most widely used FEA packages, by turning users' natural-language instructions into executed FEA analyses and result visualization. AbaqusAgent is composed of six agents, including interpreter, architect, input writer, runner, reviewer, and visualizer agents, encompassing all the essential pre-processing and post-processing steps of standard FEA analyses. A wide variety of 50 solid mechanics problems have been successfully validated, achieving an overall success rate of 86%. Beyond improving the efficiency of FEA for solid mechanics problems and lowering the barrier to computational mechanics education, AbaqusAgent advances the human-simulation interaction paradigm and enables integration with AI-empowered optimization and material characterization workflows. The code is available at https://github.com/LIRAM-LIN/AbaqusAgent

This paper details two novel frameworks for developing autonomous, agentic AI in scientific workflows. Both systems leverage a hybrid Local Body, Remote Brain architecture via Google Colab, utilizing Python-based local orchestrators to invoke large language model (LLM) cloud backends. The first agent, DeepTS/DeepCollector, automates the large-scale curation, extraction, and deduplication of time-series datasets. The second, DeepScribe, is an autonomous presentation analyzer that converts visually dense, mathematically complex physics lectures into structured scientific reports. Through practical systems engineering-such as granular attribute extraction (Cellular RAG), remote data inspection, and distributed concurrency controls-we demonstrate how agentic AI can overcome the context and reasoning limitations of current state-of-the-art systems to rigorously support scientific workflows. Finally, we outline a generalization of DeepTS to support deep knowledge graphs and discuss the application of this conceptual approach to high-energy physics (DeepQCD).

Density functional theory (DFT) serves as the basis for computational discovery in materials science and chemistry, yet each calculation demands extensive human effort: adjusting algorithms when convergence stalls, revising plans when unexpected physics emerges, and inserting steps as intermediate results reshape the problem. Existing LLM-based agents automate only the initial planning stage, producing a full execution plan upfront and leaving all subsequent adaptation to hand-crafted rules. As a result, these workflows remain fragile, do not generalize well beyond pre-planned scenarios, and often require expert intervention when failures or unexpected intermediate results require changes to the calculation path. Here, we introduce AutoDFT, a closed-loop multi-agent framework that embeds LLM reasoning into every stage of the DFT lifecycle, where a strategic planner produces a skeletal plan of step objectives; a step planner generates numerical parameters just in time from preceding results; and a monitor-recover-reflect cycle diagnoses failures, repairs them, and revises the plan when the evidence justifies it. We demonstrate both breadth and depth: breadth on VASPBench, a purpose-built benchmark spanning 34 tasks and 9 DFT calculation types, where AutoDFT achieves 94.1% task-level success with GPT-5.2; and depth on established materials databases, where AutoDFT produces quantitatively reliable property predictions across electronic, magnetic, and energetic properties. By closing the loop between planning and execution, AutoDFT enables experimentalists without deep computational expertise to obtain reliable first-principles results.

Domain scientists increasingly develop Python scripts to analyze satellite imagery but they lack scalability to large-scale data. This paper demonstrates GRAIL, an agentic translation system that converts Python geospatial workflows into executable Spark-based programs without requiring scientists to learn a new framework. Rather than fine-tuning a specialized LLM model, GRAIL adapts RDPro, a Scala library for satellite data analysis, to make it LLM-ready using structured documentation, API alias functions, and repair-oriented error logs. Translation is structured as a LangGraph pipeline that decomposes code generation into explicit sections with guided inputs and outputs, enabling targeted repair without regenerating the full program. We demonstrate GRAIL on real-world geospatial workflows and showcase the correctness and scalability of the translated code.

Medical image computing software is essential for identifying imaging biomarkers that can support diagnosis, prognosis, treatment planning, and clinical research. However, the lack of standardized, user-friendly, and reproducible software environments has limited the broader adoption of advanced medical image analysis workflows. We present Radiuma, a freely available modular platform designed to support reliable and reproducible medical image analysis across multiple modalities and file formats. Radiuma integrates image reading, visualization, registration, fusion, processing, segmentation, radiomics feature extraction, and machine learning modules for classification, regression, and clustering. Its modular design allows users to execute each component independently or connect modules through a visual workflow system, where the output of one step can be graphically passed to the next. This enables the creation of custom, executable, and reproducible multi-step pipelines without requiring extensive programming expertise. Results from each module can be inspected directly in the visualization window, providing immediate feedback on processing quality and workflow accuracy. Radiuma also supports saving and sharing customized workflows, promoting transparency, reusability, and consistency across collaborative studies. By combining flexibility, usability, and standardized analysis tools, Radiuma provides a practical environment for radiomics and machine learning research in clinical and translational settings. The platform is designed to be accessible to users with diverse expertise, including radiologists, physicists, clinicians, and data scientists.

Scientific research is being reshaped by AI systems that move beyond isolated assistance toward longer-horizon workflows spanning literature grounding, hypothesis generation, experimentation, validation, reporting, and revision. This shift marks a transition from task-level AI for science to workflow-level research automation. Yet current systems remain fragmented, differing in autonomy, domain scope, execution environment, validation mechanism, and human oversight, while still struggling with evidence preservation, reproducibility, weak-direction rejection, provenance tracking, cross-domain robustness, and accountable scientific closure. This survey examines these developments through AutoResearch, defined as the developmental spectrum of AI-powered scientific workflow automation. Within it, Vibe Research denotes the human-steered region of prompt-based assistance and human-verified execution, whereas emerging AI-led systems coordinate larger portions of the discovery loop without achieving robust autonomy. We analyze how research systems redistribute control, evidence, execution, validation, and accountability across workflows and organize the field around five workflow conditions: literature and research grounding; hypothesis formation and planning; experimentation and tool use; feedback, validation, and review; and reporting and knowledge communication. We further synthesize AI scientist systems, mixed-initiative co-research frameworks, benchmarks, domain deployments, and open-source infrastructures. Finally, we propose five evaluation dimensions--novelty, validity, impact, reliability, and provenance--and show that AutoResearch autonomy is domain-conditioned, being more credible in structured, executable, and rapidly verifiable settings but limited in embodied, delayed, heterogeneous, ethical, or institutionally accountable contexts.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

Recent advances in artificial intelligence (AI) have accelerated the growth of both human-authored and AI-generated research outputs, placing increasing strain on traditional academic publishing systems and challenging the scalability of conference- and journal-centered paradigms amid rising submission volumes, reviewer workload, and venue size. To address these challenges, we explore an AI-era publishing paradigm in which both human and AI scientists participate as authors and readers, and papers evolve through continuous, feedback-driven iteration. We propose AiraXiv, an AI-driven open-access platform built on open preprints, AI-augmented analysis and review, and reader feedback. AiraXiv supports human scientists through an interactive UI and AI scientists through Model Context Protocol (MCP)-based interactions. We validate AiraXiv through real-world deployments, including serving as the submission platform for ICAIS 2025, demonstrating its potential as a fast, inclusive, and scalable research infrastructure for the AI era. AiraXiv is publicly available at https://airaxiv.com.

Designing multi-agent workflows is especially difficult in open-ended scientific settings where tasks lack curated training sets, reliable scalar evaluation metrics, and standardized interfaces between existing tools and agents. We propose AgentCo-op, a retrieval-based synthesis framework that composes reusable skills, tools, and external agents into executable workflows through typed artifact handoffs, then applies bounded self-guided local repair to implicated components when execution evidence indicates failure. In two open-world genomics case studies, AgentCo-op composes independently developed scientific agents and external tool repositories into auditable workflows without redesigning them or running global topology search. It coordinates specialized agents for spatial transcriptomics and gene-set interpretation to enable collaborative discovery from spatial transcriptomics data, and builds a parallel workflow for cross-modality marker analysis on single-cell multiome data. AgentCo-op can also import a searched workflow as a structural prior and improve it by grounding nodes with retrieved components and applying local repair, showing that synthesis and search are complementary. On six coding, math, and question-answering benchmarks, AgentCo-op achieves the best result on four benchmarks and the best average score under a unified backbone setting, while consistently reducing per-task cost relative to multi-agent baselines. Together, these results suggest that retrieval-based synthesis can extend automated agentic workflow design beyond benchmark-optimized agent graphs to open-world workflows built from existing agents, tools, and typed artifacts.

AI-assisted research is crossing a threshold: fully automated systems can now generate research papers for as little as $15, while long-horizon agents can execute experiments, draft manuscripts, and simulate critique with minimal human input. Yet this productivity frontier exposes a deeper integrity problem: under scientific pressure, even frontier LLMs still fabricate results, miss hidden errors, and fail to judge novelty reliably. Studying developments through April 2026, we present an end-to-end analysis of AI across the complete research lifecycle, organized into four epistemological phases: Creation (idea generation, literature review, coding & experiments, tables & figures), Writing (paper writing), Validation (peer review, rebuttal & revision), and Dissemination (posters, slides, videos, social media, project pages, and interactive agents). We identify a sharp, stage-dependent boundary between reliable assistance and unreliable autonomy: AI excels at structured, retrieval-grounded, and tool-mediated tasks, but remains fragile for genuinely novel ideas, research-level experiments, and scientific judgment. Generated ideas often degrade after implementation, research code lags far behind pattern-matching benchmarks, and end-to-end autonomous systems have not yet consistently reached major-venue acceptance standards. We further show that greater automation can obscure rather than eliminate failure modes, making human-governed collaboration the most credible deployment paradigm. Finally, we provide a structured taxonomy, benchmark suite, and tool inventory, cross-stage design principles, and a practitioner-oriented playbook, with resources maintained at our project page.

Automating science laboratories enables faster, safer, more accurate, and more reproducible execution of protocols, accelerating the discovery and testing of new materials, drugs, and more. However, setting up and running autonomous labs requires coordinating numerous instruments and robots, forcing scientists to write code, manage configuration files, and navigate complex software infrastructure. We present an AI agent architecture that integrates large language models with laboratory orchestration, enabling scientists to interactively create and monitor automated lab protocols using natural language. Integrated into the Experiment Orchestration System (EOS), the AI agent operates under an agentic loop with automated validation and error correction, and supports the complete experimental lifecycle: creating protocols, running and monitoring both protocols and closed-loop optimization campaigns, and analyzing results. A visual graph editor renders protocols as interactive node-based diagrams synchronized with the AI agent's protocol representation, enabling seamless alternation between AI-assisted and manual protocol construction. Evaluated on three simulated automated labs spanning chemistry, biology, and materials science, the AI agent achieves a 97% first-attempt protocol generation success rate and an order of magnitude reduction in required interface actions.

Language models can produce convincing scientific analyses, but repeated generations on the same data do not guarantee the same result. A researcher may regenerate an identical query and receive a different fit, a different peak position or a different analysis procedure, without an obvious way to decide which output to trust. We propose typed mediation, a pattern in which the model orchestrates deterministic tools rather than generating analytical code. Each tool encodes one researcher's exact procedure for one instrument, ported through structured interviews. The model selects which tool to call and with what parameters. The tool produces the result. Regeneration does not change it. We evaluate this claim by running the same photoluminescence analysis on four platforms, including three commercial foundation models, four times each with the same prompt. The typed tool produces identical results across all runs. The commercial platforms either vary in numerical output and analytical methodology across runs, or fail to produce valid results on the task. We deploy this pattern on two instruments serving users over approximately six months, with very positive user feedback. Both cases are very challenging: they involve proprietary binary formats and per-seat licensed software, which force the tool to remain on local infrastructure alongside the data and the instrument it operates. We argue that deployment topology is not just a preference, but a structural requirement of scientific tool mediation. The result is a practical pattern for deploying language models in scientific workflows where reproducibility is mandatory, reducing analysis time from weeks to minutes while guaranteeing identical outputs across runs.

Large language models deployed for MAPDL finite-element simulation face practical reliability challenges: without structured execution control, tool encapsulation, and fault recovery, outputs may be inconsistent and task failures are common. The Agent Harness paradigm addresses this by inserting domain-specific orchestration middleware that manages tool lifecycles, workflow state, and recovery escalation. This paper presents the architecture of CAX-Agent, a lightweight agent harness purpose-built for MAPDL automation, and empirically evaluates one of its core components -- the recovery policy.CAX-Agent organizes execution into three layers -- LLM service, agent harness, and solver backend -- with a recovery ladder that escalates from deterministic rule patching through model-driven regeneration to context enrichment and human intervention. We evaluate three recovery strategies (no_recovery, rule_only, and model_only) on 50 standard structural benchmarks with three repeated runs per strategy (450 case-runs total). Two independent human raters score task completion under blind conditions; inter-rater agreement is strong (quadratic weighted Cohen's kappa = 0.84, 96 percent of score pairs within one point). Model_only achieves the best completion rate (0.9267), task score (3.59/4), total score (9.16/10), and zero-intervention rate (0.84), outperforming rule_only (0.7733, 3.17/4, 7.03/10, 0.00) and no_recovery (0.6933, 2.74/4, 5.60/10, 0.00) with large effect sizes (Cliff's delta = 0.81-0.87). The benchmark uses deliberately simple geometries to isolate recovery-policy effects; we discuss the scope of these findings and directions for broader validation.

Transparent and standardized reporting is essential for reproducible scientific research, yet adherence to reporting guidelines remains inconsistent because of the manual effort required to select and complete checklists. We present CheckSupport, an open-source, locally deployable system that uses large language models to automate the recommendation of reporting checklists and the evidence-grounded completion of checklists for scientific manuscripts. CheckSupport employs a staged prompting strategy that decomposes reporting workflows into constrained inference tasks, prioritizing faithful extraction over generative text synthesis. All inference is performed locally using instruction-tuned models, preserving data privacy and enabling reproducible, auditable workflows. Evaluated on a corpus of peer-reviewed manuscripts, CheckSupport achieved 90% overall accuracy for checklist recommendations and 88% overall accuracy for item-level completion while operating on CPU-only hardware. On average, the wall-clock time per manuscript was 12.5 seconds, including the checklist recommendation and full checklist completion. These results demonstrate that large language models, when applied as structured inference components, can reduce reporting burden and support more transparent and reproducible scientific reporting across disciplines.

Transforming neuroimaging data into clinically actionable biomarkers is a knowledge-intensive and labor-intensive process. Standardized workflows such as fMRIPrep have improved robustness and efficiency, but they are statically configured and cannot reason about downstream objectives, deliberate over alternative strategies, or close the loop between intermediate evidence and subsequent decisions in the way a human researcher would. This lack of closed-loop adaptation often leaves domain experts trapped in a cycle of manual trial-and-error to tune parameters and remediate pipeline failures, severely constraining the scalability of clinical biomarker development. To bridge this gap, we introduce NEXUS, an autonomous multi-agent framework that integrates neuroimaging workflow execution with scientific-objective understanding. Unlike conventional flat toolcalling agents, NEXUS adopts a code-centric execution paradigm where specialist agents collaboratively synthesize and optimize executable programs over composable domain-specific primitives. This design enables robust, long-horizon workflow construction that adapts dynamically to runtime observations. Furthermore, we propose a hierarchical verification framework for autonomous quality control, integrating cohort-level metric screening with agentic visual inspection to drive evidence-grounded workflow remediation. Experiments on ADHD-200 and ADNI demonstrate that NEXUS outperforms standard workflow-based baselines in predictive performance while exhibiting sophisticated agentic behaviors, including strategy exploration and adaptive refinement. The code is available at https://github.com/LearningKeqi/Virtual-Neuroscientist-NEXUS.

The promise of AI-driven scientific discovery hinges on whether AI agents can autonomously design and execute the computational workflows that underpin modern science. Molecular dynamics (MD) simulation presents a natural test bed to stress-test this claim; it requires translating physical intuition into syntactically and semantically correct input scripts, reasoning about initial and boundary conditions, diagnosing numerically unstable trajectories, and interpreting outputs against known physical behavior and laws. We introduce MDGYM, a benchmark of 169 expert-curated MD simulations spanning LAMMPS and GROMACS, two widely used MD packages, across three increasing difficulty levels. We evaluate three agentic frameworks -- Claude Code, Codex, and OpenHands -- with four LLMs, and find that all perform poorly: even the strongest agent solves only 21% of easy-level tasks, with less than 10% at higher difficulties. Trajectory analysis reveals a characteristic pattern of failure -- agents successfully invoke simulation machinery but produce physically unstable configurations, fabricate numerical outputs without executing the underlying computation, or abandon tasks prematurely rather than iterating through simulation-specific errors. These failure modes are qualitatively distinct from those observed in general software engineering benchmarks, indicating that fluent code generation does not transfer to grounded physical reasoning.

The increasing complexity of modern computational environments often burdens researchers with infrastructure management, authentication protocols, and container deployments. We present Sci-Orchestra, a layered orchestration framework designed to fully automate experimental workflows, allowing scientists to prioritize scientific discovery over backend operations. By abstracting execution through an API-driven interface, the system assumes responsibility for secure authentication, resource management, and scalable deployment across diverse high-performance computing environments using Kubernetes architectures. A key innovation of Sci-Orchestra is its autonomous marketplace, which serves as a catalyst for cross-institutional collaboration. Through an intuitive user interface, researchers can rapidly deploy and share specialized services via simple selections, eliminating the need for complex installations and technical setups. This modular infrastructure is specifically designed to facilitate industry partnerships as it provides a secure execution environment and allows external collaborators to test and validate proprietary tools without the need for source-code exchange. This ``black-box'' interoperability protects intellectual property while enabling seamless integration into broader scientific pipelines, ultimately accelerating the transition from laboratory prototypes to industrial-scale applications.

Cellular perturbation-response modeling requires coordinated choices of representations, fusion mechanisms, objectives, and training procedures. Large language models (LLMs) can propose executable candidates, but unconstrained revision can produce invalid implementations, change task semantics, or discard useful components. We present CellScientist, a protocol-constrained workflow that converts execution and validation feedback into auditable model-revision trajectories. It records design states and outcomes, routes discrepancies to specific components, and applies local revisions under a fixed task contract. A matched-budget study fixes the candidate language, predictor, fitting, and evaluator: structured revision finds better held-out predictors at small budgets under two LLM backbones. Operational audits link history to fewer repeated proposals, contract checks to contained violations, and discrepancy routing to targeted repairs. Refits of two frozen designs on an independently acquired cohort evaluate external predictive utility. Open-workflow trajectories retain improvements, regressions, and failures, while transcriptomic and single-cell searches extend application to additional response spaces. CellScientist produces both a selected predictor and an inspectable record of its development. Project page: https://limengran98.github.io/CellScientist/.

Recent LLM-based agents have closed substantial portions of the scientific discovery loop in software-only machine-learning research, in chemistry, and in biology. Extending the same loop to high-fidelity physical simulators is harder, because solver completion does not imply physical validity and many failure modes appear only in field-level imagery rather than in solver logs. We present AI CFD Scientist, an open-source AI scientist for computational fluid dynamics (CFD) that, to our knowledge, is the first to span literature-grounded ideation, validated execution, vision-based physics verification, source-code modification, and figure-grounded writing within a single inspectable workflow. Three coupled pathways cover parameter sweeps within a fixed solver, case-local C++ library compilation for new physical models, and open-ended hypothesis search against a reference comparator, all running on OpenFOAM through Foam-Agent. At the center of the framework is a vision-language physics-verification gate that inspects rendered flow fields before any result is accepted, rerun, or written into a manuscript. On five tasks under a shared GPT-5.5 backbone, AI CFD Scientist autonomously discovers a Spalart-Allmaras runtime correction that reduces lower-wall Cf RMSE against DNS by 7.89% on the periodic hill at Reh=5600; under matched LLM cost, two strong general AI-scientist baselines (ARIS, DeepScientist) execute partial CFD workflows but lack the domain-specific validity gates needed to convert runs into defensible scientific claims; and a controlled planted-failure ablation shows that the vision-language gate detects 14 of 16 silent failures missed by solver-level checks. Code, prompts, and run artifacts are released at https://github.com/csml-rpi/cfd-scientist.

Translational medicine turns underspecified development goals into evidence synthesis that must combine literature, trials, patents, and quantitative multi-omics analysis while preserving identifiers, uncertainty, and retrievable provenance. General-purpose foundation models and off-the-shelf tool-augmented or multi-agent systems are not built for this: they tend to produce single-shot answers or run open-endedly, and fall short on the auditable, scenario-specific workflows that heterogeneous biomedical sources demand. This paper introduces Ingenix BioResearcher, a scenario-guided multi-agent system that maps queries to versioned research playbooks, delegates to specialized subagents over 30+ tools and machine-learning endpoints, mixes structured database access with sandboxed code for genome-scale analyses, and applies claim-level multi-model reconciliation before editorial assembly. We evaluate BioResearcher across unit-level capabilities, open-ended biomedical reasoning, and end-to-end clinical discovery. It leads evaluated baselines on 109 single-step tests (83.49% pass rate; 0.892 average score), achieves strong biomedical benchmark performance (89.33% on BixBench-Verified-50 and the top 0.758 mean score on BaisBench Scientific Discovery), and leads on a 30-query clinical end-to-end benchmark with the highest positive hit rate (74.7% $\pm$ 3.3%) and negative clear rate (96.8% $\pm$ 0.2%). These results show broad, competitive performance across unit-level, open-ended, and end-to-end clinical evaluations.

Agent-based model (ABM) are a kind of computer model that makes it possible to simulate a set of autonomous interacting programs called agents in a shared virtual environment. Among other application field, it has been commonly used to simulate social phenomena such as urban segregation, opinion dynamic or epidemiological crisis [1]. Recently, a research emphasis has been put on ABM to study in silico the impact of non-pharmaceutical interventions to mitigate the SARS-CoV-2 outbreak of 2020, with few of them that had a great impact on global political responses [2]. Among the model used COMOKIT [3] has been design to simulate the every-day-life of inhabitant of various cities in Vietnam and test policy interventions for various COVID-19 spread scenarios. Such endeavor required huge computational power to handle a huge number of simulation replication over a large set of parameters. In this proposal we present a python package that enables to easily generate, explore and build reports for any COMOKIT experiment to be launched over High-Performance Computing (HPC) infrastructure.