Pre-Trained Video Diffusion Models

Image-to-Video diffusion models leverage input images to generate visually stunning content, yet frequently produce motion that violates physical laws. We reveal a surprising finding: a 2-step generation often exhibits better physical consistency than a 50-step output from the same model. Through spectral analysis, we trace this to phase erosion during denoising; the phase degrades significantly (dropping by $\approx 18\%$ from step 2 to step 50), whereas the magnitude remains relatively stable. Building on this insight, we propose PhaseLock, a training-free framework that preserves the valid motion priors from few-step inference throughout the denoising trajectory. Rather than relying on full-step inference for physical consistency, PhaseLock extracts a motion prior from just 2 steps and enforces it onto high-fidelity generation via Latent Delta Guidance. Our approach effectively mitigates phase degradation, improving physical consistency by an average of 6.2 points across diverse models while largely maintaining visual fidelity, with negligible overhead ($1.06\times$ time, $1.02\times$ memory) and reduced reliance on expensive external guidance methods ($\sim5\times$ time). Project Page: https://dnwjddl.github.io/phaselock

Video generation models based on Diffusion Transformers (DiTs) have achieved remarkable performance in video synthesis, yet they suffer from high inference latency and computational costs due to the quadratic complexity of 3D attention. Existing acceleration methods primarily reduce computational complexity within each individual denoising steps through techniques such as sparse attention and KV-caching. However, they rigidly adhere to the inherent constraint of the standard diffusion pipeline: every frame in the target video sequence must be subjected to a complete, dense denoising process across all diffusion timesteps. We observe that due to the corresponding contents and motions among adjacent frames, when keyframes with critical semantic transitions are anchored, the intermediate states of others often follow more predictable trajectories, which indicates that such uniform, dense denoising process is inherently redundant for natural video data. To this end, we introduce \textbf{RhymeFlow}, a training-free framework that decouples the denoising trajectories of different frames. Specifically, we first identify a sparse set of pivotal key frames that dominate the latent semantic evolution. Then, only these keyframes undergo dense, step-by-step denoising to ensure structural integrity, while non-keyframes progressively skip denoising steps to minimize computational cost. Since skipped intermediate states of non-keyframes break the temporal coherence in keyframe denoising steps, leading to visual degradation, we further introduce a latent trajectory projection module, which enables keyframes to interact with a complete and temporally consistent sequence representation. Extensive experiments on current DiT-based video generation models demonstrate our method outperforms existing baselines with higher inference speed and better visual quality.

We propose TextWand, a general-purpose framework that unifies scene text removal, generation, and replacement into a single model. By decomposing complex editing tasks into the atomic primitives of rendering and erasure, TextWand achieves precise control over both text appearance and background integrity. Specifically, we introduce a novel design, Overlay-Reference Positional Encoding (ORPE), to enforce pixel-level layout fidelity and exemplar-driven style control, alongside a new strategy, Region-Adaptive Suppression (RAS), to ensure clean text erasure. To address the absence of a comprehensive benchmark for general-purpose scene text editing among existing single-task datasets, we construct TextWand-Bench. Extensive experiments demonstrate that TextWand outperforms existing leading open-source and closed-source models by delivering superior text content accuracy, layout and style consistency, and overall image quality across scene text removal, generation and replacement tasks.

Modern video diffusion models generate increasingly realistic and temporally coherent videos, motivating their use as candidate world simulators. Yet it remains unclear whether these models internally encode physical structure, or merely reproduce motion patterns seen during training. We study this question by probing video diffusion models along latent trajectories corresponding to real videos with known physical plausibility. To obtain such trajectories, we approximately invert the deterministic sampling process by integrating the learned velocity field backward from a clean video latent to noise, giving access to the model's intermediate states and attention maps. Using these recovered trajectories, we show that physical plausibility is linearly decodable from diffusion transformer states across IntPhys and InfLevel, reaching around 81.27% average accuracy and outperforming dedicated representation-learning baselines such as V-JEPA and VideoMAE. Surprisingly, this signal is absent from the VAE latent input and emerges inside the denoising transformer itself, despite the model not being trained with a self-supervised predictive objective. These findings suggest that physically meaningful representations can arise as a byproduct of generative denoising.

Recent progress in generative modeling has made safety control a central challenge, yet existing approaches remain largely model-specific, requiring retraining or tailored interventions for each new architecture. In this work, we ask whether safety can be represented as a portable latent direction, learned once and reused across heterogeneous generators. We introduce the first framework for cross-model safety steering, in which a safety direction is estimated in a source LLM from paired safe-unsafe prompts, transported to a target generator through a lightweight alignment fitted on benign data alone, and applied at inference time. Crucially, our pipeline never accesses unsafe data on the target side, isolating whether safety can be transferred through shared representation geometry. Beyond a single global direction, we also identify a multi-vector extension that captures category-specific safety behaviors, enabling more selective control. We evaluate our approach in text-to-image and text-to-video generation across diverse source-target model pairs. Across models, transferred safety directions achieve ASR reduction and CLIP-Score/FID trade-offs comparable to directions learned natively on the target model using unsafe data, while requiring no target-side unsafe data. This indicates that safety improvements do not come at the expense of generation quality. Our results point to a modular view of safety: safety-relevant behavior is not purely model-local, but can be controlled through latent directions that persist across models. This suggests a new path toward lightweight, reusable safety mechanisms that do not require target-side unsafe data.

Video generation models have made impressive strides in synthesizing visually compelling content, yet their outputs remain confined to the virtual domain. A natural question follows: how well do these models reflect the physical world when their generated videos leave the screen and enter reality? We propose robotic manipulation as a concrete, measurable window onto this question: if a model has truly internalized physical laws, the motion it depicts should translate into executable robot behavior. We introduce Dream$.$exe, an evaluation framework that operationalizes this criterion through a video-to-execution pipeline. Given a scene image and a task description, Dream$.$exe synthesizes a manipulation video, converts the generated motion into robot trajectories, and executes them in a physics simulator, yielding a grounding signal that purely visual metrics cannot offer. Using this pipeline, we evaluate 8 models spanning frontier closed-source generators, open-source generators, and robot-specific models. Our benchmark covers 101 manually curated manipulation tasks at three levels of physical complexity, measured across visual quality, trajectory fidelity, and execution success. Encouragingly, several models achieve measurable execution success, suggesting that generative priors learned from internet-scale data already encode meaningful physical knowledge. Yet visual quality proves a poor predictor of executability, exposing a dimension of model capability that standard visual evaluations do not capture. Dream$.$exe will be open-sourced at https://github.com/showlab/Dream.exe.

Large-scale video generation models have made remarkable progress in semantic consistency and visual quality, producing videos that are increasingly coherent and visually convincing. Nevertheless, the dynamics induced by pixel-level fitting do not naturally accommodate the regularities that govern real-world motion and interaction, resulting in persistent shortcomings in physical plausibility. To address this limitation, we propose \textbf{PILA} (Physics-Informed Latent Alignment), a framework that injects physics-structured latent guidance into the frozen flow-matching dynamics of pretrained video models. Specifically, PILA first employs anchored field estimation to map frozen-generator latents into an operational physical attribute bank organized by field-proxy slots, using observable motion as a kinematic anchor for constructing less directly observed proxies. To handle the heterogeneity of real-world dynamics, PILA adopts a mixture-of-experts design over physical categories. Label-prior masked expert routing selects category-specific operator experts, whose refinements are regularized by operational residuals abstracted from physical relations. Finally, the refined proxies are fused into the physical attribute bank and decoded into a correction to the flow-matching vector field, injecting physics-aware guidance while preserving the visual prior of the pretrained backbone. With staged adapter training on Wan 2.1-1.3B and direct transfer of the learned adapter to Wan 2.2-14B, PILA achieves state-of-the-art results on VBench-2.0, VideoPhy-2, and PhyGenBench in both visual quality and benchmark-measured physical plausibility.

We present Echo Infinity, an autoregressive (AR) framework towards real-time infinite video generation that employs a learnable evolving memory to dynamically filter, abstract, and compress any-length history at constant cost. Existing methods mainly curate memory with predefined KV-cache schedules, fixed-ratio heuristic compression, or inference-time RoPE adaptation. These designs inevitably lose historical information and amplify compounding errors due to their limited cache window and ignorance of autoregressive generation noise. Inspired by human memory consolidation, Echo-Infinity replaces handcrafted memory curation with learnable Memory Query, which are updated by attention and a gating mechanism when past frames are evicted from the local window. The queries are optimized end-to-end with the video diffusion transformers (DiTs), forming an evolving memory that supports arbitrary compression ratios with constant computation independent of video length. They also act as a generalizable generation prior, improving quality even when only the optimized initial state is used. We further introduce Unified Relative RoPE Recipe, which anchors the sink frames to start from id 0 and lets the newest frame id grow at most to the DiTs' pretrained maximum temporal RoPE id throughout training and inference, freeing the model from the finite RoPE constraint and closing the train-test RoPE extrapolation gap. In long and short video generation, Echo-Infinity achieves state-of-the-art performance, and, to our knowledge, demonstrates promising 24-hour (>1.3 M frames) real-time rollouts for the first time, suggesting a practical path toward infinite video generation.

Recent text-to-image (T2I) models can render highly legible and well-structured text within images, enabling applications including document generation and slide generation. However, it remains unclear whether such systems faithfully preserve reasoning ability when complex solutions must be expressed directly through rendered text, or whether they merely imitate surface-level patterns. We investigate this question by evaluating reasoning fidelity in visual text generation, where models must express complete reasoning processes as images. Our evaluation includes long text rendering, factual knowledge probing, context understanding, and multi-step reasoning. Across these settings, we find that current T2I models frequently produce semantic errors, logical inconsistencies, and incorrect intermediate steps, even when the rendered text appears visually clear. These failures contrast with the strong reasoning performance of text-only models on the same tasks. Our findings reveal a substantial gap between visual text generation and procedural reasoning, motivating more reliable visual text reasoning.

Video diffusion transformers have achieved state-of-the-art visual quality, but their high inference cost remains a major bottleneck for real-time applications. Recent distillation frameworks produce autoregressive video diffusion models with reduced latency, yet these models still use a fixed number of denoising steps per frame, wasting computation on predictable frames and under-refining challenging ones. We present DSA, a confidence-guided adaptive computation framework for AR video diffusion. DSA introduces a lightweight confidence head, trained jointly with the generator under a distribution-matching distillation objective, to estimate per-frame denoising reliability. At inference, this confidence signal dynamically adjusts the number of diffusion steps: simple frames terminate early for speed, while complex frames receive additional refinement. Our method requires no extra video data, no heuristics, and little architectural modification. Experiments show that DSA achieves real-time autoregressive video generation, reaching 22.63 FPS with sub-second latency on H100 GPUs, while maintaining competitive or superior VBench quality compared to recent autoregressive and bidirectional video diffusion models. Our results demonstrate that confidence-guided adaptive sampling provides an effective and practical path toward interactive video generation.

We present AAD-1, an Asymmetric Adversarial Distillation framework for One-step autoregressive image-to-video generation. State-of-the-art methods adopt adversarial distillation but suffer from motion collapse and training instability, resulting in static videos. AAD-1 addresses these challenges through two key designs in architecture and training strategy. Our key architectural insight is to break the symmetry between generator and discriminator. While the generator remains causal to preserve autoregressive sampling capability, the discriminator attends bidirectionally over the full spatiotemporal context and produces a single holistic realism score for the entire video sequence. This asymmetric design enables the discriminator to effectively detect global temporal failures and long-range drift that cause motion collapse in autoregressive generation. To stabilize training, we introduce a phased strategy that first uses distribution matching to bootstrap a stable one-step generator, providing a warm-up phase that brings the student distribution closer to the teacher before adversarial distillation begins. Extensive experiments on VBench demonstrate that AAD-1 achieves state-of-the-art performance in one-step autoregressive video generation.

Causal video generators must predict from the past, but they need not learn only from it. In streaming autoregressive video diffusion, each emitted segment becomes a commitment that future segments must preserve. Standard training, however, only asks each causal state to explain the present. This creates what we call a representation-level planning gap: states that fit the current segment may discard identity, layout, and motion information needed for a consistent future. We introduce Video-Mirai, a training-only method that closes this gap without changing causal inference: the generator rolls out causally, a frozen foresight encoder reads the completed rollout non-causally, and a lightweight predictor distills the resulting stopped-gradient targets into causal states. Future frames supervise representations, never generator inputs. At inference, the encoder and predictor are discarded, leaving the original architecture, per-step FLOPs, and KV-cache behavior unchanged. Video-Mirai improves a strong Causal-Forcing baseline on 5-second VBench from 83.8 to 84.6 in terms of Total Score. On 30-second rollouts beyond the training horizon, subject consistency improves from 84.9 to 88.5 and background consistency from 90.2 to 91.9. Ablations identify future-conditioned targets as the key ingredient, and probes show that future frames become more decodable from current features. Causality should constrain inference, not representation supervision. Our study highlights that visual autoregressive models need foresight. Project page: https://y0uroy.github.io/Video-Mirai.

Video-Action Models (VAMs) leverage the broad visual dynamics captured by pre-trained video diffusion models, offering a promising path toward generalizable robot manipulation. However, RGB-only video rollouts are not directly actionable: they leave metric 3D motion, contact geometry, and fine-grained spatial constraints under-specified, making action grounding ambiguous. Meanwhile, scaling action supervision across diverse tasks and embodiments remains costly. We present PointAction, a framework that bridges video predictions to robot actions through explicit point-based 4D modeling. PointAction fine-tunes a foundation video generation model to jointly predict future RGB frames and dynamic 3D pointmaps, producing temporally consistent 3D motion of task-relevant scene geometry. These point dynamics serve as a structured, embodiment-agnostic action interface, which a diffusion-based action decoder maps to executable robot actions. By using metric 3D point dynamics as the interface between video prediction and control, PointAction reduces the ambiguity of RGB-only action grounding and supports transfer across tasks and embodiments with limited action supervision. Experiments show that PointAction achieves state-of-the-art 4D generation quality on robot scenes, outperforms existing baselines in simulation, and generalizes to two real robot arms unseen during pretraining.

Recent world action models leverage video foundation models by aligning broad visual-dynamics priors with executable robot actions. We revisit this alignment from a distributional perspective. Existing formulations typically narrow the aligned prior into an observation-conditioned policy distribution over future actions. In contrast, we keep the distribution broader by modeling the joint space of interaction videos and executable hand trajectories under multiple conditioning regimes. We propose Donk, a unified video-action denoising model for dexterous hands. With language, an initial image, and the initial hand state, Donk samples future videos and bimanual MANO trajectories as an action policy. Without the image condition, the same denoising architecture samples paired video-action rollouts from a text-conditioned distribution, turning the aligned video prior into a data engine. Across action, video, and text-only generation evaluations, Donk improves dexterous trajectory accuracy, preserves strong video fidelity, and produces smooth text-conditioned action rollouts under the same unified training recipe.

Autoregressive video diffusion models enable streaming generation but often degrade over long rollouts: static scene layouts drift, while mechanisms that improve spatial stability tend to suppress motion, causing natural flows such as water, fire, or smoke to stagnate. We study this stability-motion trade-off in fixed-camera long-horizon nature video generation, where the two failure modes can be more clearly separated than in moving-camera settings. We propose Steady-Forcing, a memory and training framework combining a persistent visual anchor (V-Sink), an exponential moving-average motion memory (EMA-Sink), block-relative temporal encoding, periodic cache purification, and distillation from a Wan2.1-14B teacher with motion-rewarded priors under task-focused configurations. Together, these components are designed to preserve background identity while sustaining visually plausible fluid dynamics over multi-minute autoregressive rollouts. Evaluations across seven baselines show that Steady-Forcing improves long horizon background consistency and imaging quality, while a blind user study indicates stronger perceived stability and motion continuity. The benchmark evaluation further suggest that generic VBench aggregate scores under-penalize fixed-camera artifacts as well as rewarding drift-induced optical flow as Dynamic Degree while not directly penalizing texture hardening or flow stagnation - motivating future task-specific benchmarks for static-camera nature-flow evaluation. Project page: https://minar09.github.io/steadyforcing/

We present a diffusion-based method for relighting dynamic portrait videos with photorealism and temporal consistency. Our method is fueled by a hybrid training dataset that consists of real-captured and rendered dynamic portrait videos with diverse subject appearances, facial motions, head poses, and known lighting conditions. Specifically, we construct an LED-based lighting system for realistic lighting emulation and high-speed video relighting data acquisition. By leveraging the image priors embedded in pre-trained video diffusion models, and using per-frame high dynamic range (HDR) environment map as lighting control, we train a high-performance generative model for realistic and identity-preserving dynamic portrait video relighting. In addition to the environment map control, our model uses a synthesized background image to enable control on the camera's exposure level and color tone. Our model can produce temporally consistent relit portrait video that looks realistic and harmonious under a provided new environment and faithfully preserve the subject's expression and fine facial features, including skin tone, wrinkles, and facial hair. Our model generalizes well to unseen data, in terms of the subject appearance, motion, and lighting condition. We perform extensive experiments on relighting in-the-wild videos with various environment maps and demonstrate practical applications on portrait photography. Results show that our method achieves state-of-the-art performance in photorealism, lighting harmony, and temporal consistency.

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI -- effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

Autoregressive (AR) video diffusion enables variable-length synthesis, but long-horizon generation often suffers from accumulated errors and identity drift. For efficiency, existing methods commonly adopt sliding-window attention during generation. This creates an irreversible generation trajectory: once the active window accumulates appearance errors, subsequent generations can only condition on this degraded trajectory and drift further away. We address this limitation by formulating long video generation as a retrieval-augmented generation (RAG) problem. Rather than relying solely on the recent window, we treat previously generated latents as a dynamic, searchable history. We propose LongLive-RAG, a general retrieval framework for AR video generation. At each new block, LongLive-RAG uses a query embedding to retrieve relevant historical latents. This lightweight retrieval step adds only a small overhead relative to generation and lets the generator condition on non-local context instead of only the recent window. To make retrieval more discriminative, we introduce the Window Temporal Delta Loss that suppresses redundant local similarity and encourages embeddings to capture meaningful temporal changes. Together, these components help reduce error accumulation caused by sliding-window attention. Experiments across multiple AR backbones and generation lengths show improved long-video quality and the best average VBench-Long rank. To our knowledge, among open-ended AR long video generation methods, LongLive-RAG is the first to formulate self-generated latent history as content-addressable retrieval memory. Code is available at https://github.com/qixinhu11/LongLive-RAG.

Maintaining long-term geometric consistency remains challenging for long-horizon autoregressive video generation. Memory-augmented generative models address this by retrieving historical frames, but their effectiveness depends on two key design choices: what 3D-geometric evidence should represent past observations, and how memory frames should be selected from this evidence. Existing methods often rely on camera poses or field-of-view overlap, which are lightweight but too coarse to reason about pixel-wise visibility, or use explicit 3D reconstruction, which provides fine-grained evidence but is costly to maintain over long rollouts. We propose Coverage-Maximizing Retrieval-Augmented Generation (COVRAG), a depth-based memory retrieval framework that uses pretrained 3D priors to construct a target-view coverage map as lightweight 3D memory evidence. For frame selection, COVRAG maximizes residual coverage gain, iteratively retrieving frames that explain target-view regions not covered by the current context or previously selected memories. To improve scalability in long-video generation, we introduce sliding-window depth caching for efficient geometry estimation. Experiments on RealEstate10K and DL3DV10K show that COVRAG improves long-horizon geometric consistency while maintaining low latency compared to baselines.

The rapid advancement of AI-driven video generation has transformed content creation, while simultaneously increasing the risk of misinformation through localized manipulations in long-form videos. Existing video forensic methods predominantly operate on short, independent clips, and thus fail to capture realistic scenarios where AI-generated content is sparsely embedded within otherwise authentic footage. To bridge this gap, we formulate the task of Temporal AI-Generated Segment Localization and Explanation, which targets authenticity detection, temporal localization, and interpretable analysis of manipulated segments in untrimmed long videos. We further introduce TASLE, a large-scale benchmark comprising 12,472 untrimmed videos with diverse manipulation patterns and rich annotation signals, including temporal boundaries, authenticity labels, and segment-level rationales. In addition, we propose MSLoc, a coarse-to-fine forensic baseline that combines a boundary-sensitive proposal generation module for efficient long-video scanning with an MLLM-based refinement module for precise boundary localization and interpretable reasoning. Experiments validate the effectiveness of the proposed baseline, highlighting the importance of segment-level explainable forensics for long-form AI-generated video analysis. Our dataset and code are publicly available at https://debby-0527.github.io/TASLE.

Diffusion models have shown remarkable success in video generation. However, whether such models are truly aware of the 3D structure underlying visual observations, rather than simply reproducing plausible 2D projections, remains an open question. In this work, we investigate this question through human motion control, a task that requires precise modelling of 3D human geometry, motion, camera viewpoint, and scene context. Unlike prior methods that rely on rendered 2D motion guidance videos, we propose a render-free framework that conditions video generation directly on compressed 3D human mesh tokens. This representation preserves full 3D geometric information while enabling a unified token-based generation pipeline that processes video tokens jointly with motion tokens in a DiT-based architecture. This design requires the model to reason jointly about appearance, 3D structure, and camera viewpoint during video generation. Experimental results demonstrate strong performance on human motion control benchmarks, while reducing artifacts induced by view-dependent 2D guidance and trajectory-pose mismatches during editing. These findings suggest that video diffusion models, when equipped with mesh tokenization, can better capture complex 3D human structures and their interactions with the surrounding environment.

Generative video models have achieved remarkable visual fidelity and temporal coherence, yet intentional camera control remains elusive. Existing frameworks treat camera motion as a byproduct of pixel synthesis, producing trajectories that are stochastic, spatially inconsistent, and indifferent to the human subject driving the scene. In this work, we present Auteur, a method for language-driven, human-centric camera framing in generative video. Our core insight is that professional filmmakers conceive shots not as world-space trajectories but as framings defined relative to the actor, encoding shot size, angle, and composition as functions of human pose and motion. We formalize this intuition as a human-centric camera parameterization and introduce a Domain-Specific Language (DSL) that is convertible to standard 6-DoF camera parameters. A fine-tuned multimodal large language model then acts as a virtual director, mapping natural language descriptions and coarse human motion to sparse DSL keyframes that are deterministically interpolated into continuous camera trajectories, which are then provided as input to video generators. We train and evaluate Auteur on a new dataset of 34K aligned text, human motion, and DSL-annotated camera trajectories drawn from procedural synthesis and real-world movie footage from the CondensedMovies dataset. Auteur enables cinematographic framing of human-centered scenes, a capability largely absent in prior generative models. To assess this behavior, we propose new framing-focused metrics, and our experiments show that Auteur consistently outperforms existing methods. Project page is https://cyberiada.github.io/Auteur/

The explosive growth of Text-to-Image (T2I) models, from large-scale versions to lightweight, real-time ones, now faces diminishing marginal returns from single-model scaling. Agentic T2I methods emerged to alleviate this bottleneck by using multiple models. However, existing agentic T2I methods suffer from three key challenges: reliance on expensive handcrafted priors or human annotations, rigid single-path decision mechanisms, and a neglect of inference efficiency. To address these challenges, we introduce OctoT2I, a novel agentic framework that reformulates the T2I task as a joint optimization of generation quality and inference efficiency. OctoT2I implements a stateful, multi-round routing strategy that adaptively selects the most suitable tool based on its knowledge and memory. This strategy is enabled by a knowledge base built from scratch by our novel Self-Evolving Mechanism. This mechanism, which requires no human supervision, first autonomously defines foundational Conceptual Dimensions (eg, style, color, count) and then intelligently explores their combinations via an iterative" Propose--Solve--Evaluate--Learn"(PSEL) loop. The PSEL loop efficiently discovers each tool's capability frontier, driving continuous improvement without external guidance. Extensive experiments demonstrate that OctoT2I achieves competitive performance (0.96) on GenEval while delivering a 90.3% inference speedup and a 56.6% energy-efficiency gain over the leading baseline (Flow-GRPO), striking an exceptional balance between performance and efficiency. Code and models will be made available.

Video diffusion models have significantly advanced portrait video generation, yet their high computational demands limit their use in interactive applications. This work presents a framework for streamable talking portrait video generation conditioned on speech audio and reference images. Designed meticulously for streaming scenarios, it features a causal video VAE for deep latent compression and an autoregressive latent denoising model. Our causal VAE integrates a variable number of reference images as guidance, allowing the network to focus on dynamic information rather than static appearance, thereby enhancing compression efficacy and reconstruction quality. Additionally, we extend the residual auto-encoding paradigm to improve spatial-temporal causality handling in our VAE. The generator is based on a Rectified Flow Transformer architecture and produces video latents in a blockwise auto-regressive manner. Our method enables the real-time generation of high-quality talking portrait videos, achieving speeds significantly faster than baseline models. Furthermore, comprehensive experiments demonstrate that it is on par with or even outperforms these large models in realism, vividness, and video quality.

Modern vehicle platforms are equipped with a rich sensor suite, including LiDAR, calibrated multi-camera rigs, and accurate ego-motion, that in principle offers strong signal for re-rendering a driving scene from novel viewpoints. A growing line of recent work leverages video diffusion models for this task, using their generative priors to synthesize plausible novel views from sparse vehicle observations. In practice, however, existing methods exploit only a fragment of this signal, and their quality tends to degrade as the target trajectory departs from the recorded driving path. We argue that this is fundamentally a multi-sensor fusion problem: sparse LiDAR reprojections supply accurate but incomplete metric geometry, surround-view reference imagery supplies dense appearance but no metric depth, and camera poses tie the two together across views. We introduce StreetNVS, a video diffusion framework that jointly conditions on all three signals through a Reference-Enhanced Camera Attention module based on a relative ray-level positional encoding. We develop a two-stage curriculum training strategy that gradually exposes the model to increasingly sparse LiDAR. On the Waymo Open Dataset, StreetNVS substantially outperforms state-of-the-art baselines under sparse LiDAR conditioning, matches methods that rely on 10-100 times denser point clouds. We further show capabilities of synthesizing coherent videos along extreme out-of-trajectory paths such as elevation, lane-shift, pullback, and rotation. Our website: https://streetnvs.github.io

Aspect-Based Sentiment Analysis (ABSA) encompasses seven distinct subtasks, each focusing on different extracted elements. Despite the proven success of generative models in unified aspect sentiment analysis, existing approaches often rely on auto-regressive token-by-token generation without grasping the whole information of the aspect and opinion terms, resulting in boundary insensitivity, particularly in context of multi-word aspect and opinion terms. To address these issues, we present DiffuSent, a non-auto-regressive diffusion framework that systematically formulates all ABSA subtasks as boundary denoising diffusion processes, progressively refining boundaries over noisy states. Furthermore, we introduce a contrastive denoising training strategy which effectively address duplicate predictions with subtle variations introduced by diffusion process. Extensive experiments across 28 settings (7 subtasks x 4 datasets) demonstrate that DiffuSent achieves delivers consistent improvements over the strongest generative and span-based systems. DiffuSent exhibits notable gains on multi-word triplets, achieving an average improvement of +2.48 F1, and maintains robust extraction accuracy in sentences containing multiple sentiment triplets. Moreover, the non-auto-regressive decoding enables substantial efficiency benefits, reaching up to 181 times faster inference than auto-regressive generative baselines

Text-to-video generation has advanced rapidly in visual quality, but remains under-evaluated for factuality and practical usefulness. We introduce knowledge-intensive video generation (KIVI), where models generate videos from short information-seeking prompts that ask for explanations, procedures, or demonstrations. To evaluate this setting, we construct KIVI-Bench, a benchmark of 1,080 prompts, and propose automatic metrics for factuality and helpfulness. Human evaluation shows that our metrics significantly better align with human annotations than existing alternatives. Experiments on seven state-of-the-art video generation models show that current systems still lag behind human performance, especially on visual properties, procedural operations, and clear information presentation. These results highlight KIVI as a challenging direction for factual and instructionally useful video generation.

Recent advancements in video-based world models have demonstrated an unprecedented ability to synthesize high-fidelity visual sequences. However, a fundamental gap persists between visually plausible video generation and the functional requirements of a world model, particularly in maintaining a stable and reasonable internal state over extended temporal horizons. While existing benchmarks primarily emphasize visual quality, motion coherence, and text-video alignment, they largely overlook memory, the core capability of a world model to preserve consistency across long-term horizons and complex interactions. To address this gap, we present \textbf{MBench}, a comprehensive benchmark dedicated to quantifying and evaluating the memory capability of video world models. We systematically decompose the memory capability of video world models into three hierarchical and complementary core dimensions: entity consistency, environment consistency, and causal consistency, which are further refined into 12 quantifiable sub-dimensions for comprehensive characterization of long-term memory. Our benchmark is built upon rigorously curated real-captured long videos, and evaluated by rule-based quantitative matrices and VLM to enable objective and comprehensive consistency assessment. Extensive evaluations of mainstream state-of-the-art video world models reveal critical systemic limitations of existing methods in long-term state retention, providing a standardized benchmark and clear research direction to advance the field.

Large video diffusion models achieve strong visual quality but remain expensive to deploy because each sample requires many denoising steps and a large resident parameter footprint. This paper studies a deployment-oriented compression pipeline for Wan2.2-T2V-A14B by combining few-step distribution-matching distillation with low-bit quantization. The pipeline follows the model's dual-expert denoising route, calibrates the high-noise and low-noise branches separately, protects sensitive entrance layers, and uses HiF4-style low-bit representation to improve dynamic-range coverage. Quantization is calibrated on the distilled few-step student rather than on the original long-step trajectory, reducing activation-distribution mismatch during inference. The proposed co-design keeps the quantized model close to the same-step full-precision model and surpasses the original full-precision baseline at 8 and 20 steps on average. The 20-step setting gives the best quality-efficiency trade-off in the tested configurations.

Video generation models are becoming a scalable form of world models, but they mainly generate plausible motion rather than proactively control or optimize the underlying dynamics. As a result, an object in the generated video may follow trajectories that are unsafe, not smooth, inefficient, or physically inconsistent. In this work, we propose \textbf{OptiWorld}, a framework that brings classical optimal control into video generation at inference time. OptiWorld first extracts a compact, task-relevant world state, then plans an optimal trajectory under physical constraints, and finally renders the video conditioned on this trajectory. We formulate planning as a geometric problem on a continuous manifold, which converts 3D geometry and task-dependent physical constraints into a unified planning geometry. By adding this optimal-control layer, OptiWorld generates videos with preferable dynamics, demonstrating strong potential in multiple tasks including goal-conditioned image-to-video generation, video dynamics editing, and counterfactual generation.

While Video Diffusion Models (VDMs) excel at synthesizing high-fidelity videos, enabling precise camera and scene control remains challenging. Existing methods predominantly rely on implicit diffusion priors to generate unobserved regions, inevitably leading to structural collapse during high-dynamic movements or complex occlusions. To address this challenge, we propose Real2SAM2Real, a framework that leverages 3D lifting models (e.g., SAM3D) to extract an explicitly editable 3D cache, serving as a robust geometric scaffold for the VDM. By capturing the entire 3D volume of foreground entities rather than just their visible shells, this cache injects holistic spatial priors into the VDM, providing dependable 3D-aware guidance for complex scene dynamics. To effectively leverage this 3D guidance while preserving pre-trained priors, we design a Soft Spatial-Aligned Injection mechanism alongside a minimally invasive fine-tuning strategy tailored for VDMs. Furthermore, we employ masked normal maps as a cross-modal bridge to construct a 3D-free data curation and perturbation pipeline. Extensive experiments demonstrate that Real2SAM2Real enables precise, decoupled control over both camera trajectories and multi-entity motions. By utilizing the complementary context from generative 3D caches, our framework overcomes typical breakdowns caused by over-reliance on diffusion priors, maintaining exceptional spatiotemporal consistency under large camera shifts and severe occlusions. Crucially, by decoupling geometry from appearance, our VDM-tailored 3D cache eradicates perspective ambiguities caused by structural holes and erroneous facades, as well as misleading cues from reflections and refractions. Project website is available at https://jiayi-wu-leo.github.io/real2sam2real

Connector-based video unified models have demonstrated strong capability in instruction-grounded video synthesis, but integrating a large high-fidelity generator into the unified training loop is computationally prohibitive, limiting achievable visual quality. We therefore propose Lumos-Nexus, a training-efficient unified video generation framework that facilitates the development of strong reasoning-driven generation capabilities while significantly enhancing visual fidelity. Lumos-Nexus adopts a two-stage design: 1) During training, only a lightweight generator is aligned with the understanding block to learn to take in reasoning-driven semantic control. 2) During inference, we introduce Unified Progressive Frequency Bridging (UPFB) to progressively hand off generation to a high-capacity pretrained generator in the shared latent space, enabling coarse-to-fine refinement and producing high-fidelity videos without compromising reasoning quality. To fill the gap in reasoning-driven video generation benchmarks, we introduce VR-Bench, which assesses a model's capability to translate inferred intent into coherent and semantically aligned video content. Extensive experiments demonstrate that Lumos-Nexus achieves substantial gains in visual realism and temporal coherence on VBench, while exhibiting strong reasoning-based generative performance on VR-Bench. Code and models are available at https://jiazheng-xing.github.io/nexus-lumos-home/.

Text-to-video (T2V) generation faces challenging questions when generating videos with long horizons containing multiple events. Inspired by the intrinsics of the diffusion process, we probe video diffusion transformers (DiTs) and uncover intrinsic turning points in the DiT denoising trajectory where conditioning text affects generation from global layout to fine-grained details. Building on this finding, we present TunerDiT, a simple yet effective progressive steering method that requires no additional training for multi-event generation. TunerDiT comprises two steering handles: (1) Event-Partitioned Masking that enforces event boundaries while allowing cross-event transition bands; (2) Cross-Event Prompt Fusion that injects neighboring event semantics for late-stage refinement. We contribute a self-curated prompt suite for benchmarking multi-event generation, i.e., Meve. TunerDiT achieves state-of-the-art performance across 8 metrics and offers a tunable trade-off between video consistency and event separation, compared with other training-free methods. The improvement in text alignment increases with the event count, indicating a scaling possibility with increasing event count.

Real-time and accurate spatial audio generation is pivotal for delivering an immersive experience. However, existing spatial audio synthesis technologies are often encumbered by a tradeoff between generation quality and high inference latency, as well as difficulty in capturing precise spatial information from multimodal inputs. To address these challenges, we propose SwanSphere, a unified streaming framework for high-fidelity spatial audio generation from panoramic videos and text prompts. SwanSphere mainly makes the following contributions: 1) We introduce a causal autoregressive diffusion transformer architecture that enables streaming high-quality spatial audio generation. 2) We design a Spatial Video-Audio Contrastive (SVAC) learning strategy to align the video encoder with the acoustic domain, and further employ a multi-objective online direct preference optimization (ODPO) scheme, resulting in strong spatial perception and robust multimodal spatial audio synthesis. 3) To alleviate the current scarcity of spatial audio datasets, we also develop an automated annotation pipeline for generating detailed spatial captions. Experimental results demonstrate that SwanSphere achieves superior performance in both video-to-spatial and text-to-spatial audio generation tasks. Demos can be found at: https://swanaigc.github.io.

Frame-wise action-controlled image-to-video generation is a promising paradigm for interactive world simulation, where each control signal should elicit an immediate visual response. However, maintaining visual fidelity and 3D consistency over long autoregressive rollouts remains challenging. Existing 3D-aware methods often suffer from catastrophic drift due to two impediments: information loss from \textit{Latent--RGB Cycling}, where generated latents are repeatedly decoded to RGB and re-encoded for future conditioning, and the training--inference gap induced by the \textit{error-free hypothesis}, where clean training memory fails to match prediction-corrupted inference memory. To address these challenges, we present \textbf{Robust Dreamer}, a memory-augmented framework built around how to design 3D memory and how to use it robustly. First, we introduce \textbf{Latent Gaussian Memory}, which anchors diffusion latents inherited from the generation process to Gaussian primitives and recalls them via latent-space Gaussian splatting. This provides dense, geometry-aware, view-aligned conditioning while avoiding accumulated degradation from repeated VAE conversion. Second, we propose \textbf{Deviation Learning with Dynamic Deviation Archive}, which synthesizes rollout-induced latent deviations through a one-step approximation, stores them by autoregressive stage and denoising timestamp, and injects them into historical memory during training. This exposes the generator to realistic corrupted memory states and teaches internal correction before inference. Experiments on ScanNet, DL3DV, and OmniWorldGame demonstrate state-of-the-art long-horizon performance.

Precise camera pose control is critical for video diffusion, yet maintaining geometric consistency remains a challenge. Existing methods that directly inject numerical camera parameters into the diffusion backbone often fail to bridge the gap between abstract coordinates and visual content, leading to structural distortions. To address this issue, we propose CameraNoise, a flow-to-noise warping method that encodes camera motion into a temporally coherent stochastic representation. Unlike conventional conditioning, CameraNoise embeds camera poses directly into the noise space. This decouples motion from scene appearance while faithfully preserving trajectory dynamics. Specifically, we introduce a novel Geometry-guided Reprojection Flow and a noise warping algorithm, which jointly preserve the Gaussian prior of diffusion and ensure consistent noise propagation under camera transformations. By integrating CameraNoise into the diffusion process, our framework delivers stable, high-fidelity videos. Extensive experiments demonstrate that our approach significantly outperforms prior methods in both visual quality and trajectory faithfulness. The project page and code are available at: https://gulucaptain.github.io/CameraNoise/.

Autoregressive (AR) video generation extends videos by producing latent chunks sequentially, but scaling to long videos requires repeated access to a growing historical KV cache. Existing methods reduce this cost by truncating the KV cache or compressing it into implicit memory, but both lose explicit access to query-relevant historical details. We propose OmniMem, an explicit full-range memory retrieval framework that performs sparse KV retrieval over the historical cache. To make this practical for chunk-based AR video generation, OmniMem addresses two issues: (i) local bias in sparse KV selection and (ii) Union Explosion in memory access. Adaptive Window Exclusion removes local-window blocks from the selection candidates when sufficient long-range history is available, preserving the sparse budget for informative long-range retrieval. Query-Shared KV Selection reduces cross-query diversity, while Per-Head Scattered KV Access avoids expanding head-specific selections into a large selected KV buffer. This allows each attention head to retrieve non-contiguous KV blocks according to its own selection pattern. Experiments on long-video generation show that OmniMem improves Dynamic Degree by 52.3% and preserves strong consistency over strong baselines, while maintaining comparable memory usage.

Recent progress in video diffusion models has enabled remarkable generative fidelity, yet leveraging these priors for restoration remains limited by the strong coupling between conditional and unconditional branches in standard classifier-free guidance. We introduce a training-free framework that enhances distorted and low-resolution videos by decoupling these signals in time. Our proposed Decoupled Time Guidance (DTG) evaluates the unconditional branch at a cleaner diffusion timestep, providing a lookahead prior that preserves geometry while suppressing replication of warped content. This temporal bias is annealed throughout sampling, allowing the model to transition from structure correction to detail refinement without retraining. Combined with any off-the-shelf restoration module in a plug-and-play manner, our approach improves perceptual coherence and restores plausible structure in AIgenerated and real-world videos alike. To facilitate evaluation, we curate GenWarp480, a benchmark of 4,400 distorted 480p videos synthesized from diverse text-to-video models. GenWarp480 focuses on characteristic generative degradations such as warped faces, body misalignments, and spatial artifacts, providing a purpose-built testbed for assessing robustness to generative errors. Extensive experiments demonstrate that our method achieves significant improvements in structural fidelity and temporal stability without any model training.

Scaling Diffusion Transformers to generate high-resolution, long videos is constrained by the quadratic cost of self-attention, and existing sparse attention methods degrade under high sparsity. We show empirically that generation quality is determined not by the sparsity ratio itself, but by how well the sparse mask aligns with the tile-wise geometry of full attention. Based on this insight, we propose Veda, a distilled sparse attention framework that formulates tile selection as an explicit reconstruction problem from full attention. Veda integrates statistics-aware tile scoring with head-aware tiling to reduce estimation error and structural mismatch, enabling aggressive sparsity. A hardware-efficient tile-skipping kernel converts theoretical sparsity into practical wall-clock speedups. Experiments on large video diffusion models, including Waver and Wan2.1, demonstrate substantial acceleration with no noticeable degradation in generation quality. To generate 720P 10-second videos on Waver-T2V-12B, Veda achieves a 5.1$\times$ end-to-end speedup and a 10.5$\times$ self-attention speedup, reducing attention overhead from 92% to 50%. Notably, the gains increase with sequence length, indicating that Veda scales favorably with spatiotemporal resolution across models.

Digital humans are fundamental to immersive interaction, yet creating a unified model for holistic modalities, including text, audio, motion, and visual content, remains an open challenge. In this paper, we present Archon, a fully pretrained, human-centric unified multimodal model for holistic avatar generation. Archon unifies seven modalities with modality-specific tokenizers, and a native autoregressive unified multimodal model pretrained on synchronized modalities and 72 diverse tasks to model holistic joint distributions. To address the token explosion challenge in high-fidelity talking videos, we introduce a memory-efficient semantic video reparameterization, achieving 4x token reduction while preserving fine-grained dynamics, coupled with a semantic-driven video diffusion decoder. We further propose a "Thinking in Modality" that decomposes ambiguous cross-modal tasks into stepwise thinking in an alternative chain of modality, progressively enhancing fidelity and controllability. Extensive experiments demonstrate that Archon achieves superior or comparable performance across diverse digital human generation tasks, validating the effectiveness of our unified framework. Project page: https://zju3dv.github.io/archon/.

Distribution Matching Distillation (DMD) is a widely used paradigm for accelerating inference in few-step video diffusion models. However, DMD-style video distillation faces two coupled challenges: the fake score must track a continuously evolving generator, making training costly when frequent updates are required, while reverse-KL-style matching can be mode-seeking and conservative for preserving strong motion dynamics. To address these issues, we propose \textbf{Score Gradient Matching Distillation (SGMD)}. SGMD adopts a fake-score perspective by directly optimizing the fake score toward the teacher, while using teacher stop-gradient Fisher as a stable distribution-matching objective. We provide a gradient analysis that motivates this objective choice under ideal tracking. Building on this, SGMD introduces a pair of dual potentials: negative-residual (NR) for outer-loop correction and residual-contraction (RC) for inner-loop tracking. Empirically, compared to DMD2, SGMD achieves an approximately $\sim 3\times$ training speedup and substantially improves motion dynamics for 4-step distilled models while preserving temporal consistency. A human study confirms that SGMD is preferred in motion quality and overall preference, while visual quality and text alignment remain comparable. Code is available at https://github.com/ModelTC/LightX2V.

Autoregressive (AR) video generation has emerged as a promising paradigm for long-horizon video synthesis, where each frame is generated conditioned on previously generated tokens. To accelerate inference, the KV cache is used to avoid redundant recomputation across generation steps. Nevertheless, its growth with generation length introduces increasing memory and error accumulation, limiting the scalability of AR models to even longer sequences. Existing KV cache compression methods mitigate this issue by selectively retaining only video tokens deemed important. However, most existing methods assess token importance using short-horizon signals derived from the current or historical generation context, making these methods prone to overlooking tokens that appear unimportant at early steps but later become critical for future frames. In this work, we identify an important property of trained AR video models: although RoPE-modulated queries evolve across autoregressive steps, the underlying canonical pre-RoPE query distribution remains remarkably stable throughout the video generation process. This approximate stationarity implies that future query distributions are estimable from historical statistics, enabling principled future-aware cache decisions without any additional training. Building on this insight, we propose Future Forcing, a training-free future-aware KV cache policy for AR video generation. Specifically, Future Forcing first constructs a future query proxy from historical statistics, then scores KV cache tokens by their importance under this proxy, and finally merges redundant token pairs within the affine subspace induced by the future query. Extensive experiments show that Future Forcing improves long-horizon consistency under limited KV caches, achieving up to 1.49 improvement in subject consistency on VBench-Long for 60s generation over existing AR video KV cache policies.

World models for interactive video generation have largely focused on single-agent settings, where future observations are generated from a single control signal. However, many generated environments require multi-agent interaction: multiple players, robots, or embodied agents act simultaneously within a shared space. Scaling world models to such settings requires a principled multi-agent design: agents should remain independently controllable, permutation-symmetric, and support efficient inference while maintaining consistency across time and perspectives. In this paper, we present our generative multi-agent world model for interactive simulation. It introduces Simplex Rotary Agent Encoding, a parameter-free extension of 3D RoPE that represents agents as vertices of a regular simplex in rotary angle space. This gives each agent a distinct phase while making all agents permutation-equivalent, enabling scalable agent identity without learned per-slot identities or a fixed agent ordering. To avoid dense all-to-all attention across agents, we further propose Sparse Hub Attention, where learnable hub tokens mediate token interaction across agents, reducing cross-agent attention cost from quadratic to linear in the number of agents. For real-time rollout, we distill a full-context diffusion teacher into a causal student that generates temporal blocks sequentially with KV caching, enabling action-responsive generation at 24 FPS. Experiments in multiplayer virtual environments show that our model improves video fidelity, action controllability, and inter-agent consistency over slot-based and dense-attention baselines, while generalizing from two to four players without additional training.

We present a method for harmonizing the lighting of a foreground video to match a target background scene, adjusting shadows, color tone, and illumination intensity (relightful harmonization). Unlike images, acquiring labeled data for videos, where identical motions are recorded under different lighting conditions, is practically infeasible and non-scalable. While one way to create such paired data is to apply existing image-based harmonization models frame by frame to a video, the resulting outputs often suffer from significant temporal jitters. We overcome this problem by introducing a novel lighting deflickering model that can stabilize the global and local lighting flickering artifacts. Our video diffusion model learns from these upgraded deflickered data with a volume of real and synthetic videos to generate high-quality video harmonization results. We further propose an asymmetric alpha mask conditioning technique to learn the clean boundaries from real videos. Experiments demonstrate that our model achieves strong temporal coherence, naturalness, cleaner boundaries, and physically meaningful lighting behavior, while maintaining strong relighting expressiveness compared to prior image-based and video-based harmonization methods.

Diffusion Transformers achieve strong video generation quality, but the quadratic cost of full attention limits efficiency. We introduce OSP-Next, an efficient text-to-video generation model that integrates sparse attention, parallelism, quantization, and reinforcement learning. OSP-Next uses a hybrid full-sparse attention architecture, where the sparse component is implemented with Skiparse-2D Attention. This fixed-pattern mechanism applies token-wise and group-wise sparse attention along spatial dimensions, leveraging locality while maintaining native compatibility with FlashAttention kernels. Based on the local equivalence of rearrangement in Skiparse-2D Attention, we further propose Sparse Sequence Parallelism (SSP), which partitions subsequences across ranks and switches sparse patterns through a single All-to-All communication. Compared with Ulysses Sequence Parallelism (SP), SSP provides a native parallel strategy for sparse attention and reduces communication volume by 75%. OSP-Next also incorporates HiF8 quantization to enable stable joint training with 8-bit quantization and sparse fine-tuning, and applies Mix-GRPO post-training to improve the performance of the sparse model. Experiments show that OSP-Next achieves a VBench total score of 83.73%, surpassing the Wan2.1 baseline. Under the 5-second 720P and 5-second 768P settings, OSP-Next achieves up to 1.64$\times$ single-GPU speedup and over 1.52$\times$ eight-GPU speedup on NVIDIA H200 GPUs. In addition, with only a 0.4% drop in VBench total score, OSP-Next-HiF8 achieves 1.69$\times$ and 2.27$\times$ speedups under the two settings on a single Ascend 950PR, demonstrating the efficiency and performance of OSP-Next across hardware platforms.

Despite the rapid progress of text-to-image (T2I) models, generating images that accurately reflect complex compositional prompts (covering attribute bindings, object relationships, counting) still remains challenging. To address this, we propose BiDPO, a framework to enhance T2I model's capability of compositional text-to-image generation. We begin by introducing an carefully designed pipeline to construct a large-scale preference dataset, BiComp, with strictly quality control. Then, we extend Diffusion DPO to jointly optimize image and text preferences, which is shown to greatly effective in improving the models to follow complex text prompt in generation. To further enhance the models for fine-grained alignment, we employ a region-level guidance method to focus on regions relevant to compositional concepts. Experimental results demonstrate that our BiDPO substantially improves compositional fidelity, consistently outperforming prior methods across multiple benchmarks. Our approach highlights the potential of preference-based fine-tuning for complex text-to-image tasks, offering a flexible and scalable alternative to existing techniques.

Modern video generative models produce visually impressive results, yet frequently violate basic physical principles. We propose Proprio, a training-free framework that enables a frozen video generator to assess and improve the physical plausibility of its own outputs. Inspired by proprioception, the biological sense of one's own movement, Proprio treats the model's flow residual under controlled latent perturbations as a self-scoring signal. Samples that are better explained by the generator's learned dynamics induce smaller and more stable residuals. We aggregate this signal across timesteps and perturbations, focus it on motion-relevant regions with a dynamic spatiotemporal mask, and use it for best-of-N search, gradient-based self-refinement, or both. Across text-to-video and image-to-video benchmarks, Proprio consistently improves physical plausibility, outperforming VLM-based scoring, and external world-model baselines in several settings. With TurboWan2.2, Proprio improves Physics-IQ from 32.2 to 37.5 (+16.5%) and VideoPhy2-hard physical commonsense from 45.6 to 55.0 (+20.6%). Human evaluation further shows that raters prefer Proprio-selected or refined videos for physical plausibility in roughly two-thirds of comparisons. These results suggest that frozen video generators contain actionable internal signals for evaluating and improving the physical plausibility of their own outputs.

As Text-to-Video (T2V) generation models continue to evolve, the complexity of video evaluation necessitates a fine-grained assessment across various axes. To address this, recent works have focused on developing Multidimensional Video Reward Models (MVRMs), which decompose the evaluation process to better align with the multifaceted nature of human visual perception. However, training effective MVRMs is fundamentally challenged by the complex nature of video data. In this work, we identify a critical phenomenon termed Dimensional Heterogeneity: the reliability of a training sample can vary substantially across evaluation dimensions, meaning that a sample may provide reliable supervision for one objective while inducing high supervision risk for another. Consequently, prevailing data-centric methods that filter based on global scalar metrics are ill-posed for T2V tasks. To address this, we propose a disentangled influence framework that that efficiently estimates dimension-specific supervision risk. Leveraging this framework, we introduce two dimension-disentangled refinement strategies: Dimension-Disentangled Pruning, which removes extreme high-risk samples, and Dimension-Disentangled Reweighting, which softly down-weights high-risk supervision. Extensive experiments demonstrate that our disentangled strategies significantly outperform global filtering baselines, yielding reward models with superior alignment to ground truth.

Portrait animation methods have achieved substantial visual quality and lip synchronization, but fine-grained manipulation of the eye region still faces a trade-off between input granularity and motion accuracy. Existing methods using emotion labels or coarse text prompts are insufficient for describing subtle ocular dynamics, whereas approaches based on Action Units or driving videos provide higher fidelity at the cost of a heavier input burden. These limitations are still restrictive for beyond-emotion states (e.g., thinking) and drowsiness. In light of the above, we propose CogPortrait, a two-stage framework that generates portrait animations from high-level labels. In the first stage, three chain-of-thought Multimodal Large Language Models (MLLMs) agents compile high-level labels into facial keypoints through temporal event planning, prototype retrieval, and composition from a real-behavior library, and semantic-physiological constraint enforcement. In the second stage, a DiT-based video generation backbone synthesizes the final animation conditioned on the keypoints, reference portrait, audio, and text prompt, enhanced by a dynamic classifier-free guidance strategy with eye-region-aware reweighting and KTO-based refinement for boundary cases. We further introduce the EMH benchmark covering diverse emotions and beyond-emotion categories with two AU-level metrics for evaluating fine-grained eye-region and head-motion control. Extensive experiments on HDTF and the EMH benchmark demonstrate that CogPortrait achieves more precise eye-region control than existing methods while maintaining supe- rior visual quality and identity consistency

Video generation models are increasingly used as world simulators for tasks like driving and robotic manipulation. What matters in these settings is not whether a single video looks right, but whether the model's output changes when its input changes. We test this by giving a model two prompts describing the same scene with one physical detail varied, and checking whether the two videos diverge the way physics predicts. The wording difference between the prompts is small by design, since only one variable is changed, but the correct physical difference is not. A model that misses this can still produce two videos that each look plausible individually, and existing benchmarks score videos one at a time and cannot detect this failure. We introduce What-If World, 319 such prompt pairs built on real frames from nuScenes and DROID, organized by a taxonomy of six physical variables shared across driving and manipulation. Each pair is scored with APEO, a four-part rubric checking whether each video follows its prompt (Adherence), is physically consistent (Physics), preserves the shared scene (Environment), and ends in the correct difference (Outcome). Across nine state-of-the-art models, no system exceeds 52% on the paired score, and open-source models cluster near 28%. Every model tested fails on a large fraction of causal interventions, indicating substantial room before these models can reliably support action-conditioned simulation or model-based planning. Where models do score well, performance appears to track the visual prominence of the intervention rather than the tractability of its underlying physics. Some visually subtle interventions score as low as 14.2%, while visually pronounced ones reach 40.4%.

Unsupervised visual object tracking is a challenging task that requires following arbitrary targets in videos without training on ground-truth annotations. Despite considerable progress, existing state-of-the-art unsupervised trackers often struggle in scenarios that demand fine-grained understanding of semantic and visual structural information within video frames. Text-to-image diffusion models are well known for their ability to generate images that accurately reflect the semantics and structures described in the input prompt, demonstrating a strong grasp of visual semantics and structures. Building on this capability, we approach the unsupervised tracking from a new perspective by exploiting the rich semantic knowledge encoded in pretrained text-to-image diffusion models. To adapt the diffusion models, which are originally developed for image generation, to the tracking task, we reinterpret the models as a bridge between text and image modalities. This connection is realized through the cross-attention mechanism: when both text and an image are input into the models, they highlight the regions of the image that are semantically aligned with the text in the cross-attention maps. We therefore learn a prompt that represents the tracking target and activates its corresponding region in the cross-attention map for each frame, which enables object tracking with the diffusion model. Specifically, our method Diff-Tracking is composed of two main components: an initial prompt learner and an online prompt updater. The initial prompt learner generates a prompt that captures the target object in the first frame, allowing the diffusion model to identify the target. The online prompt updater refines the prompt based on motion information, enabling consistent tracking across video frames. We evaluate our approach on six challenging tracking datasets demonstrate the effectiveness of our approach.

This report describes Tail-Aware HiFloat4, our submission to the low-bit text-to-video generation quantization challenge. Our method adapts the public ViDiT-Q post-training quantization pipeline to Wan2.2 under the HiFloat4 numerical format. We quantize the main linear layers in both Wan2.2 transformer modules with W4A4 HiFloat4 fake quantization, keep numerically sensitive boundary modules in high precision, and introduce an activation-tail-aware percentile calibration module for channel-mask construction. Together with compact PTQ-state restoration, this design reduces the influence of rare calibration outliers while keeping the runtime HiFloat4 arithmetic and sampling pipeline unchanged.

Controllable and physically grounded egocentric video generation is essential for embodied agents to reason about how their own and others' actions manifest and change the world. Compared to generic video synthesis, egocentric generation is especially challenging: the camera is tightly coupled to the actor, leading to rapid viewpoint changes and frequent self-occlusions; the underlying actions are subtle, articulated, and often only partially visible; and both the people and the scene state must evolve consistently with the specified controls. We present E$^3$C, a controllable video diffusion framework for egocentric generation that builds structured and compact conditions disentangling persistent scene structure from human-driven dynamics. From context frames, E$^3$C constructs a semi-dense point cloud-based 3D memory and augments each point with appearance descriptors from video-VAE features. Rendering this memory into target viewpoints produces conditioning aligned with the target frames. Human dynamics are modeled separately. The observed people in the scene are controlled by skeleton renderings (exo human control), while the camera wearer is specified by their 3D body joints and 6DoF wrist motion (ego human control). To preserve ego human control when the wearer's body parts are invisible, we introduce an ego motion encoder that produces persistent cross-attention tokens. Experiments on Nymeria show that E$^3$C improves visual fidelity, camera-motion accuracy, object consistency, and ego & exo human control over strong baselines, while also enabling intuitive scene editing.

Chunk-wise autoregressive video diffusion models rely on a KV cache of previously generated chunks to avoid redundant computation, but this cache quickly becomes a memory bottleneck as videos grow longer. Methods that quantize the KV cache to low bitwidths reduce memory pressure but degrade video quality. We show that a key driver of this degradation is a systematic bias in attention weights: due to the convexity of the exponential in softmax attention, quantization noise inflates the contribution of cached keys, a phenomenon we call the Jensen bias. This effect causes quantized keys to steal attention mass from the unquantized current chunk. We derive a per-attention-score correction that removes this bias in expectation, computed on the fly from the quantization step sizes of the cached keys and the query norm. Using a second-order Taylor approximation, the additional computational overhead is negligible, and no additional memory is needed alongside the cache. Evaluated on MAGI-1, SkyReels-V2, and HY-WorldPlay at INT2 quantization, our correction recovers most of the quality lost to aggressive quantization, reaching near-BF16 video quality, and can outperform INT4 quantization while using 50% less memory.

Generating high-fidelity and controllable synthetic data is critical for advancing end-to-end autonomous driving, particularly for addressing the long tail of rare safety-critical scenarios. Existing occupancy-guided methods typically rely on shallow conditioning mechanisms and reference-frame-dependent video synthesis, which limits fine-grained controllability from arbitrary BEV layouts and restricts their applicability for scalable simulation. In this paper, we propose AnyScene, a unified occupancy-centric framework for driving scene generation. AnyScene generates semantic occupancy sequences from BEV layouts through a Spatial-Temporal Occupancy Diffusion Transformer that jointly tokenizes BEV and occupancy features in an autoregressive manner. This design enables precise controllability from cross-dataset and user-defined BEV inputs while naturally supporting long-horizon generation. Building upon the generated occupancy, a Geometry-Grounded View Expansion module treats occupancy as the canonical spatial representation and synthesizes temporally consistent multi-view driving videos in a reference-free and autoregressive fashion, supporting flexible camera configurations at inference time. Extensive experiments demonstrate that AnyScene achieves state-of-the-art performance in both occupancy and video generation. It exhibits strong generalization to unseen and customized layouts, and provides measurable benefits for downstream tasks such as sparse-view 3D reconstruction.

Autoregressive video generators are attractive for streaming, long-horizon, and interactive applications, but distilling strong black-box teachers into causal students remains difficult. The student must learn under its own rollout distribution, whereas practical teachers may expose only prompt-conditioned completed videos and may differ in architecture, capacity, temporal design, and sampling schedule. This interface makes supervised fine-tuning off-policy, score-based distillation inapplicable, and direct adversarial imitation too sparse for denoising-time credit assignment. We propose Adversarial Flow Distillation (AFD), an on-policy framework for heterogeneous black-box video distillation. AFD queries the teacher and rolls out the current student on the same prompts, trains a prompt-paired Bradley-Terry discriminator to estimate clean-sample teacher-student discrepancy, and converts the resulting on-policy advantage into forward-process flow-matching updates on the student's own noised states. Thus, AFD provides dense velocity-field supervision while requiring no teacher scores, latents, denoising trajectories, step alignment, or reverse-chain reinforcement learning. Experiments across two causal AR student families show that AFD consistently improves motion- and physics-sensitive generation while preserving general video quality, and ablations validate the importance of adaptive on-policy feedback and forward-process credit assignment. The method requires only clean teacher videos and student rollouts, providing a practical route for distilling proprietary or heterogeneous video generators into efficient autoregressive students.

We present Paris 2.0, the first video generation model pre-trained through decentralized computation. Its training recipe builds upon Paris 1.0 (arXiv:2510.03434), the first ever open-weight Decentralized Diffusion Model (DDM), which showed that image generation can be trained without a monolithic GPU cluster. However, temporally coherent video generation had remained an open problem under decentralized training, and Paris 2.0 closes it. In low-resolution text-to-video training, against a monolithic model trained on the same data under a matched total compute budget, Paris 2.0 cuts Frechet Video Distance (FVD) from 561.04 to 279.01, a ~2.0x improvement, and lifts CLIP text-video similarity and aesthetic score.

With the continued advancement of text-to-image (T2I) generation, producing high-quality images is becoming increasingly attainable; consequently, user demands are shifting toward images that better satisfy their specific requirements. As reward models play an increasingly important role in assessing whether generated images align with user preference, this trend introduces an important challenge for reward modeling: rather than relying solely on static and general evaluation dimensions, reward models should account for the task-relevant and fine-grained criteria through which users assess whether generated images meet their specific requirements. To address this challenge, we propose DyCoRM, a dynamic, criterion-aware reward model that grounds task-relevant criteria and performs criterion-aware preference comparison. To support this setting, we construct DyCoDataset-20K, which provides dynamic criteria together with criterion-level annotations, and further derive DyCoBench-1K, a benchmark for systematically evaluating reward models under dynamic criteria. We further introduce DyCoPick, which applies criterion-aware reward modeling to selecting T2I images. Our contributions establish the first reward modeling framework for dynamic and fine-grained evaluation and practical application in T2I generation.

Event cameras offer significant advantages over conventional frame-based counterparts, including high temporal resolution, low latency, and energy efficiency. These characteristics make them suitable for high-speed and high-dynamic range scene acquisition scenarios; however, the lack of dense intensity frames limits the direct applicability of conventional computer vision methods for scene understanding. Event-to-video (E2V) reconstruction seeks to bridge this gap by converting asynchronous event streams into a sequence of synchronous video frames. Existing E2V reconstruction methods based on convolutional neural networks and transformers operate primarily in the spatial domain and often struggle to recover fine structural details while suppressing severe reconstruction artifacts. To address these issues, we propose MSFET-E2V, a novel multiscale frequency-enhanced transformer model. At its core lies a cross-domain attention module, which fuses spatio-temporal features with frequency-aware representations derived from the discrete wavelet transform. Unlike prior methods relying solely on spatial attention, our approach effectively captures both local and global structures by taking into account low- and high-frequency components, enhancing detail preservation and robustness across various motion scenarios. Furthermore, we propose a lightweight wavelet-enhanced skip block that serves as a skip connection, facilitating artifact suppression and structural detail refinement through joint spatial-frequency domain processing. Extensive experiments demonstrate that MSFET-E2V achieves superior performance over state-of-the-art methods on multiple real-world event datasets, offering significant gains in reconstruction quality. Moreover, compared to the existing transformer-based method, our proposed model significantly reduces the number of parameters, the GPU memory usage, and inference time.

Generating 4D scenes from a single-view video is inherently ill-posed: a single viewpoint lacks the information needed to recover a complete, dynamic scene with full coverage. Existing methods are typically limited to monocular videos, simple 3D effects, or only small viewpoint perturbations around the original viewpoint, falling short of true 4D generation. Meanwhile, the lack of large-scale datasets capturing full-scope 4D scenes with synchronized multi-view videos further hinders progress in this direction. We propose a novel single-view video-to-4D framework that casts full-scope 4D generation as a multi-view video synthesis followed by optimization-based 4D reconstruction from the generated views. To instantiate this formulation end-to-end, we make three key contributions. First, we introduce Real-MV-4D, a large-scale dataset of synchronized multi-view videos captured in diverse real-world environments to provide the 4D supervision. Second, we train a multi-view video diffusion model driven by a novel fused time(T)-view(V) attention mechanism that directly embeds geometric reprojection priors and explicit camera conditioning into its view-time interactions. Unlike basic feature fusion, this direct binding strictly aligns the generation process with physical 3D priors to produce a dense, synchronized T$\times$V video grid. Third, rather than relying on non-interactive and inconsistent 2D video interpolations, we lift the synthesized multi-view videos into an explicit 4D representation (i.e. 4DGS), regularized by a Flow Matching Distillation loss that exploits the multi-view prior to improve novel-view rendering. Extensive experiments demonstrate that our method outperforms existing approaches in both visual fidelity and geometric consistency, enabling full-scope 4D scene generation from single-view videos.