Search research

Body movement communicates intent at distances and in conditions where neither the face, nor speech can be captured. We study the recognition of communicative intent from 2D body pose alone. We argue that body motion is a reliable signal especially in scenarios that require real time low-cost on-device person-to-robot communication in long distance environments, such as rescue missions. However, existing resources do not isolate this signal. Affective corpora combine body, face, voice and text, while skeleton action-recognition benchmarks label the action performed rather than the message conveyed. We release a dataset of real frames of full-body pose covering ten communicative intents and we compare it against other real (IPC) and synthetic (MotionLCM, VEO3.1, Kimodo) ones that span a range of difficulty. We target systems that can run on a robot's limited onboard hardware. We benchmark multiple models, from skeleton graph classifiers to joint motion-forecasting networks, and report performance metrics together with frame rate on an embedded GPU (NVIDIA Orin~Nano), since speed matters as much as accuracy in our scenario. Finally, we show that a model's own autoregressive self-consistency works as an unsupervised reliability signal. We give a short proof that bounds the probability that a self-consistent prediction is correct, show that this probability grows with the number of consistent steps, and identify the conditions under which a confident prediction can still be false, benchmarked against industry-standard metrics.

Conventional dynamics analysis of the human body is often constrained by the need for contact force and torque sensors and controlled laboratory environments. To address this issue, this study proposes an opticalmechanics kinematic-dynamic integrated estimation framework for multibody systems. Specifically, a constrained multibody model is established to describe the system dynamics, while image-measured kinematic quantities are used as non contact inputs for dynamic estimation. The unknown joint torque is then identified through a genetic-algorithm based optimization by minimizing the discrepancy between model-predicted and image-measured kinematic quan tities. Experimental validation on an air-bearing platform showed that the wrist joint torque estimated from image data achieved a mean absolute error of 0.46 Nm compared with sensor measurements. In the forward prediction test, the model-predicted angular velocity achieved a mean absolute error of 0.006 rad/s relative to the image-measured results. This study demonstrates the potential of combining image measurement and mechanical modeling for non-contact dynamic estimation in scenarios where direct force and torque measurement is difficult.

Tool learning enables LLMs to invoke external tools to accomplish tasks. Prior studies have demonstrated the effectiveness of a hierarchical structure: a high-level policy handles global planning and decomposes tasks into manageable sub-tasks, and a low-level policy focuses on invoking tools to solve these sub-tasks. However, these works typically optimize the high-level and low-level policies separately, leading to planner-executor misalignment and limiting LLM performance on tool-use tasks. In this paper, we propose a method called Capability-Aligned Hierarchical Learning (CAHL), which leverages RLVR to jointly optimize both policies, enabling better alignment between the high-level planner and the low-level executor. Experiments on constrained tool-use benchmarks (API-Bank and BFCL) and an open-ended environment (Bamboogle) demonstrate the effectiveness of CAHL.

Scene Graphs (SGs) provide structured representations of visual scenes by modeling objects and their pairwise relationships. Despite recent progress, existing datasets primarily focus on generic natural contexts, leaving domain-specific and function-oriented scenes largely underexplored. This limitation restricts the evaluation of relational reasoning in scientific experimental scenes, thereby hindering the development of intelligent monitoring, analysis, and related applications in such scenes. To address this gap, we introduce PhysScene, the first SG dataset tailored to physics experiments. PhysScene encompasses specialized instruments, structured experimental setups, and functional relations intrinsic to experimental environments, enabling reasoning that extends beyond spatial co-occurrence to logical dependencies. Rather than pursuing large data scale, PhysScene focuses on strong semantic constraints and high relation density in experimental scenes, posing new challenges for existing scene parsing algorithms while offering opportunities for further improvements. Extensive analyses and experiments show that PhysScene complements existing benchmarks and establishes a valuable testbed for advancing scientific visual reasoning. The dataset is publicly available at https://github.com/ZMH-SDUST/PhysScene.

Medical agent systems are increasingly expected to support interactive clinical decision making rather than only static question answering. In such settings, effective agents must reuse prior experience across evolving cases, yet existing memory mechanisms often retain raw historical traces that are redundant, noisy, and difficult to govern. More importantly, they rarely distinguish which memories are truly useful for future reasoning. This limits their ability to accumulate compact and reliable experience for long-horizon clinical reasoning. To close this gap, we propose SkeMex, a post-deployment self-evolution framework that improves medical agents through a skill-based memory without updating model weights. SkeMex distills informative interaction trajectories into structured skills that encode reusable procedural knowledge, and organizes them into a multi-branch repository spanning general, task-specific, and action-level experience. To determine which memories should be reused and retained, SkeMex estimates context-dependent utility from environment feedback and uses it to guide value-aware retrieval and repository governance. A closed-loop ``Read--Write--Assess--Govern" lifecycle further supports continual evolution by writing new skills, updating utilities, promoting useful memories, and removing harmful entries. Experiments across diverse clinical tasks show that SkeMex consistently outperforms representative memory-based agents in both offline and online settings. It also generalizes across model backbones and supports transferable skill memory. All data and code will be released publicly.

Modulation recognition systems rely on heterogeneous signal representations. 2D signal-image modalities such as time-frequency and cyclostationary maps capture structural patterns, while 1D statistical descriptors such as higher-order power spectra encode complementary cues. Under distribution shift, these modalities degrade unevenly, making robust fusion a central challenge for practical deployment. Progress is further limited by the lack of a unified evaluation protocol that systematically separates different shift types. This paper addresses both challenges through a joint benchmark-and-model study in underwater acoustic modulation recognition. UAMR-ShiftBench is the first benchmark to jointly cover in-distribution, low-SNR, unseen-environment, unseen-communication-parameter, and measured sea-trial evaluation under a single matched protocol, with two independent real-world subsets collected during two sea-trial campaigns conducted in March and November in the South China Sea. SCP-TriCA fuses STFT, cyclostationary, and P2/P4 (second- and fourth-order power spectra) modalities hierarchically: the two 2D modalities are first aligned through bidirectional cross-attention, and the 1D statistical modality is then incorporated through a sample-adaptive selective gate. On UAMR-ShiftBench, SCP-TriCA achieves 95.33% in-distribution accuracy and 74.59% simulated OOD average, outperforming the strongest baseline by 5.12 percentage points, and reaches 91.14% and 94.86% on the two sea-trial subsets, exceeding the best baseline by 15.71 and 23.00 percentage points respectively. Ablation results confirm that the gains stem from modality complementarity and the hierarchical fusion design. Code and models are available at https://github.com/ronglaiqian/UAMR-ShiftBench.

Humanoid robots hold immense potential for real-world assistance, yet agile interaction with objects in unstructured environments demands tightly coupled whole-body coordination. Despite recent advancements, current controllers face a critical deployment gap. They rely heavily on dense reference trajectories and perfect state observability, which inherently limits physical generalization. We present Vision Guided Agile Interaction Control (VAIC), a unified framework that bridges this gap by operating exclusively on onboard depth, historical proprioception, and a decoupled user command interface. VAIC employs a two-stage distillation paradigm. First, a privileged teacher policy masters diverse interaction skills using precise object kinematics and exact environmental states. Second, a deployable student policy distills these capabilities by replacing full body tracking with velocity targets across multiple axes and an interaction indicator for each frame. The student utilizes a recurrent object adaptation module to implicitly infer unobservable object dynamics from raw depth streams and proprioception. Evaluations and real-world deployments on the humanoid robot demonstrate that a single VAIC policy successfully executes highly diverse dynamic tasks. These tasks include box carrying, cart interaction, and skateboarding, consistently outperforming baselines and advancing autonomous humanoid deployment.

Reliable robotic navigation necessitates the seamless integration of accurate global localization and dense, metric-consistent obstacle perception. A common strategy to achieve these capabilities involves integrating diverse sensing modalities: cameras offer rich visual features for localization, while active sensors like LiDAR provide direct metric measurements. However, such multi-sensor configurations necessitate complex spatial-temporal calibration and increase deployment overhead. Although vision-only approaches offer a low-cost and scalable alternative, existing monocular visual systems typically struggle to simultaneously achieve efficient, globally consistent localization and dense, metric-consistent geometric perception. To bridge this gap, we propose \textbf{VGP-Nav}, a unified framework for \textit{Metric-Aware Visual Geometric Perception} that relies solely on monocular RGB input to jointly support metric localization and obstacle perception. Our key insight is to anchor localization-grounded visual geometry to physically meaningful scale constraints derived from ground-plane geometry, thereby providing a reliable metric reference for monocular perception. VGP-Nav resolves monocular scale ambiguity online and produces localization-grounded, metric obstacle representations that are directly applicable to downstream planning. Extensive experiments demonstrate strong generalization across diverse environments and successful deployment on real mobile robots, highlighting the practicality of our approach for scalable, low-cost, and safe autonomous navigation.

Autonomous drone swarms in space-constrained environments such as warehouses, inspection corridors, and urban delivery routes must share limited airspace safely at high vehicle density. Existing approaches rely on fixed safety zones sized for worst-case velocity, which wastes airspace in congested scenarios. We replace the fixed radius with an adaptive, speed-dependent safety sphere whose size scales with braking distance: tight at low speeds, expanded at high speeds. We develop both a centralized model predictive control (MPC) formulation and a distributed MPC (DMPC) in which each drone optimizes locally from detected neighbors, accommodating mixed fleets with non-cooperative agents. We prove feasibility up to the geometric packing limit evaluated at the minimum radius, establish Lyapunov stability under sufficient conditions on the adaptation parameter, drone density, and prediction horizon, and extend these guarantees to the distributed setting via a contraction condition that preserves the centralized stability margins. We further derive modified sphere-packing capacity bounds and a throughput-optimal crossing speed for narrow passages. Simulations confirm that the adaptive framework remains feasible where fixed-radius methods fail: it roughly doubles the admissible drone count, reduces traversal time through constrained passages by about 25 percent, and enables passage through openings impassable to static safety zones. The centralized variant realizes a larger fraction of the theoretical capacity, while the distributed variant offers a more realistic deployment model for mixed-fleet operations under the same safety guarantees.

The convergence of the 2026 European Union Safe and Sustainable by Design (SSbD) framework, Corporate Sustainability Due Diligence Directive (CSDDD), and Carbon Border Adjustment Mechanism (CBAM) introduce a severe governance bottleneck for advanced semiconductor manufacturing facilities ("Smart Fabs"). Regulatory compliance demands have surpassed the capacity of manual corporate reporting, creating a direct conflict between multi-stakeholder transparency and corporate data privacy. This paper addresses this challenge by introducing a zero-trust socio-technical orchestration framework that operationalizes a six-layer SSbD reference architecture within trustworthy industrial data spaces. We propose a shift from reactive automation to autonomous governance through "Professional Proxies"-role-based agentic workflows executing within hardware-isolated trust zones. Structured as an interoperable network protocol stack, the framework coordinates an automated, five-step "relay race" between Facility, Process Engineering, and Finance proxy teams to align factory-floor yield models with macro-level sustainability mandates. By executing Virtual Metrology (VM) predictions and Federated Machine Learning (FML) inside hardware-rooted Trusted Execution Environments (TEEs), this architecture resolves the Data Sovereignty Paradox, demonstrating how fabs can export cryptographically signed compliance tokens via International Data Spaces (IDS) connectors without exposing proprietary process recipes. Ultimately, this framework provides technology managers with a verifiable, evidence-based pathway toward resilient, net-zero Industry 5.0 ecosystems.

Autonomous obstacle removal from the ground is an important earthwork task, but this is difficult to automate because an excavator must adapt its excavation trajectories over repeated cycles as soil-obstacle conditions change. Learning such state-dependent behavior requires a training environment that reproduces accumulated soil-obstacle interactions, including contact states, terrain deformation, and obstacle visibility. Accordingly, particle-based simulation is suitable for the relevant policy learning. However, particle simulation is computationally expensive, and repeated excavation cycles further increase the learning cost. We observe that the burial condition of an obstacle governs both task difficulty and simulation cost: deeper burial makes obstacle removal harder while also requiring more particles for accurate simulation. This observation motivates a burial-conditioned curriculum learning strategy. We propose a time-efficient sim-to-real policy learning framework in which the policy observes terrain and obstacle information from RGB-D measurements and then outputs a parameterized excavation trajectory; in this process, the simulator reproduces in a real-world excavator the same observation-action interface it uses under controllable burial conditions. The curriculum begins with shallow burial conditions and progressively increases burial depth while adjusting particle count, thus simultaneously controlling task difficulty and simulation cost. Experiments show that the proposed framework successfully learns an effective obstacle-removal policy, whereas baseline methods fail even after a full week of training. The proposed curriculum achieves effective performance within three days and achieves successful transfer to a real 12-ton excavator operating on open ground with various steel obstacles, thus demonstrating robust obstacle removal.

Recently, mobile edge computing (MEC)-enabled collaborative deep neural network (DNN) inference has emerged as a promising approach for delivering intelligent services to resource-constrained mobile devices. A representative scenario is multi-user collaborative edge inference, where distinct devices independently partition their DNN models and offload backend computation to a common edge server over wireless networks. However, determining the optimal DNN partition for each device is challenging due to unknown and time-varying system conditions, including fluctuating wireless links and diverse device capabilities. To address this problem, we propose Cooperative Autodidactic NeuroSurgeon (CANS), a collaborative edge inference framework that enables devices to adaptively learn optimal DNN partitions by sharing informative feedback during online inference. To handle the challenge of device heterogeneity and better leverage offline inference experience, we integrate a novel FedLinUCB-DW algorithm that groups devices of the same type and warm-starts online exploration using local offline early-exit inference experience. Furthermore, we provide theoretical guarantees for FedLinUCB-DW by deriving the regret upper bound. We also validate our method on both a simulated environment and a hardware prototype system. Empirical evaluations demonstrate that CANS achieves lower inference latency compared to state-of-the-art baselines. Especially, in prototype experiments on two edge devices, the proposed CANS reduced average inference latency by up to 50% compared to the non-cooperative baseline.

Agentic reinforcement learning (RL) has become an important post-training paradigm for turning LLMs from static chatbots into interactive agents, giving rise to representative applications such as OpenClaw. Existing work mainly focuses on policy optimization algorithms and training frameworks, but pays less attention to the full data lifecycle of agent-environment interactions, from data production to training consumption. To bridge this gap, we present Claw-R1, an interactive step-level data middleware system for agentic RL. Claw-R1 connects heterogeneous agent runtimes with RL training backends through two core components: a Gateway Server and a Data Pool. The Gateway Server captures multi-turn interaction steps through a unified LLM API entry point, while the Data Pool organizes them into step-level records consisting of prompt IDs, response IDs, rewards and other metadata. In our demo, users can interactively inspect live trajectories, examine the state, action, and reward of each step, curate data by quality and readiness, and configure training-ready batches for different downstream RL algorithms. Overall, Claw-R1 treats agent interaction traces as managed data assets rather than temporary runtime logs. Through this demonstration, we hope to encourage the community to recognize the importance of data management in agentic RL. Our code is available at https://github.com/AgentR1/Claw-R1 and the demonstration video can be found at link https://youtu.be/Pw47dAOw6B0.

Evaluation protocols can lag behind LLM capabilities. Programmatically verified benchmarks cover narrow surface constraints, whereas real-world instruction following and agentic workflows require judging semantic, contextual, and policy-dependent behavior. We study expert-curated rubric-based evaluation as a unified mechanism for measurement and reinforcement-learning rewards across two settings: complex instruction following and enterprise agentic tasks. We identify rubric-design choices that affect reward quality, including maximum viable atomicity, intent-aware criterion design, and LLM-judge calibration. We introduce ComplexConstraints, an expert-curated instruction-following suite comprising a public 75-prompt benchmark with 1,559 rubric criteria and a disjoint 1,000-prompt training set, with 10-40 atomic criteria per prompt. Empirically, rubric rewards improve training in both fixed task datasets, such as ComplexConstraints, and stateful RL environments, such as CoreCraft. Training a 4B model on ComplexConstraints improves mean criterion pass rate by +15.5 pp on a held-out split, bringing it within 0.5 pp of the untrained baseline of a roughly 60x larger Qwen3 model, and the gains transfer to external benchmarks the model never saw during training: +8.4 pp on AdvancedIF and +10.1 pp on MultiChallenge. In CoreCraft, rubric-reward RL likewise transfers to out-of-distribution benchmarks (+4.5 pp BFCL, +7.4 pp tau^2-Bench, +6.8 pp Toolathlon). These results show that expert-authored rubrics provide effective evaluation targets and scalable reward signals for improving LLM instruction following and agentic behavior.

Unmanned Aerial Vehicle (UAV) multispectral point clouds (MPC) provide high-dimensional spatial-spectral data for sub-canopy target detection; however, their efficacy is significantly compromised by severe illumination heterogeneity caused by vegetation shadows. To address this, we propose a prior-free anomaly detection framework capable of robustly handling lighting variations. First, we formulate solar angle estimation as an inverse optimization problem. By coupling spectral indices with a ray-tracing model, this strategy achieves Prior-Free Shadow Extraction without relying on flight metadata, effectively distinguishing dark objects from true shadows. Second, to mitigate spectral distortions, we introduce an Illumination-Consistent Sparse Representation mechanism. Unlike standard reconstruction methods, we construct a background dictionary strictly from neighbors sharing the same illumination state. This constraint effectively disentangles spectral reflectance from lighting variations, ensuring that targets are represented solely by physically consistent background points. Experimental results indicate that the proposed method significantly improves the separability between anomalies and background in complex forest environments, demonstrating superior performance over state-of-the-art baselines. This framework is particularly suited for identifying camouflaged military targets, mapping fallen tree trunks, and uncovering archaeological ruins hidden beneath dense foliage.

This study proposes the Behavioral Protocol Framework (BPF), an entropy-controlled pluralistic alignment framework designed to address two critical challenges in autonomous agent economies: the hivemind effect arising from excessive strategic convergence among agents and the lack of transparency in autonomous decision-making processes. The proposed BPF consists of three core modules: Mentalizing-based Social Intelligence (MbSI) grounded in Theory of Mind (ToM), Pluralistic Alignment (PA), and a Verifiable Execution Kernel (VEK). These modules are organically integrated within a closed-loop architecture that governs the entire lifecycle of agent behavior, from decision-making and execution to verification and feedback. To evaluate the proposed framework, a simulation environment implemented in Python and a Streamlit-based user interface will be developed. Through empirical experimentation, the study aims to examine whether the entropy-control mechanism of the PA module can effectively preserve strategic diversity among agents and mitigate collective convergence, while the VEK module provides a comprehensive and transparent audit trail of the decision-making process. The anticipated results are expected to demonstrate that the proposed framework can simultaneously enhance the stability, efficiency, and trustworthiness of autonomous agent economies. Consequently, this research offers a practical approach for developing robust, transparent, and accountable agent-native economic systems.

We study a stochastic multi-armed bandit problem in which the set of available arms expands over time. This setting arises in sequential experimentation when new actions or treatments become available during an ongoing study, making regret against a single best arm in hindsight inappropriate. We instead evaluate performance relative to the best arm currently available, leading to a dynamic-regret criterion for arriving-arm environments. To address the resulting challenges of arrival information discrepancy (AID) and a drifting benchmark (DB), we propose UCB for Arriving Arms (UCB-AA), an elimination-based procedure with an aiding preliminary screening step for newly arrived arms before full competition with incumbent arms. We show that UCB-AA attains regret bounds that depend explicitly on the arrival process, achieves sublinear dynamic regret under regularity conditions on gap evolution, and admits an online extension for unknown horizons. Simulation results show that UCB-AA reduces wasted pulls and maintains a smaller active arm set while preserving competitive regret performance.

Agentic AI systems can behave differently across runs: the same request may produce a different plan, a different tool call, a different code edit, or a different final answer. Such variability arises from several layers that are often conflated. At the core of many current agents is a foundation model, a large pretrained model adaptable to many downstream tasks, embedded in an orchestration loop that plans, calls tools, observes results, and updates state. One explicit intrinsic source of variability in such systems is token generation: the model computes scores over possible next tokens, the scores are converted into probabilities, and a decoder may sample tokens using a pseudo-random number generator. A small sampled token difference can then cascade downstream into a different tool call, code path, search query, or agent state. Other sources of variability are extrinsic to token sampling, including changing environments, live data, serving infrastructure, batch effects, and numerical details. By separating these layers, this tutorial clarifies what it means to call agentic AI systems stochastic, when such variability can be reproduced under matched conditions, and why deterministic execution need not imply identical behavior in deployed settings.

World Action Models (WAMs) generalize better than standard Vision-Language-Action (VLA) policies to novel motions and environments, because a video-modeling objective lets them learn from abundant unlabeled video rather than scarce labeled robot demonstrations. This generalization is computationally expensive. To complete a task, a WAM runs over multiple inference chunks, and each chunk requires a costly denoising process. Existing acceleration methods reduce this cost by caching and reusing computation within a single chunk's denoising trajectory. Our empirical analysis reveals a substantial source of redundancy they overlook: redundancy across chunks. When a robot executes a smooth behavior, the residuals computed at a given denoising step are strongly correlated from one chunk to the next. We introduce C$^3$ache, a training-free method that caches and reuses these residuals across inference chunks at the same denoising step. Experiments on benchmarks with a Fast-WAM backbone show that C$^3$ache achieves up to a $2.5\times$ speedup in total wall-clock inference time, with negligible degradation in task success rate.

Agent benchmarks score submissions with outcome verifiers that are typically hand-written and brittle, leaving them open to reward hacking. We audit 1,968 tasks across five terminal-agent benchmarks and find 323 (16%) hackable by frontier models given only the task description. This corrupts both leaderboard rankings and RL training signal, yet the standard response is manual and reactive. We introduce the hacker-fixer loop, a method for building exploit-resistant verifiers without per-task manual patching. The loop alternates three LLM agents: a hacker tries to pass the verifier without solving the task, a fixer patches the verifier to reject each discovered exploit, and a solver confirms the patched verifier still admits legitimate solutions. The loop iterates: each patch reshapes what the verifier rewards, surfacing the next exploit. We further add verifier access, and let patches transfer across tasks, to broaden the exploits the loop discovers. On KernelBench, the loop drives the attack success rate from 62% to 0% on a held-out corpus of publicly reported exploits. We also find that weaker agents in the loop can defend against much stronger hackers: Gemini 3 Flash's loop drives the stronger Gemini 3.1 Pro and Claude Opus 4.7's attack success rate from 76% and 61% to 0% on KernelBench, and Gemini 3.1 Pro's from 39% to 17% on Terminal Bench across 77 tasks. We release Terminal Wrench (323 hackable environments, 3,632 hack trajectories) as a snapshot of the current attack surface, our patched verifiers, the exploits the loop discovered, and our implementation as a basis for future work.

Falling is an inherent risk for humanoid robots operating in unstructured environments. Existing reinforcement learning methods that leverage expert motion priors are predominantly trained on flat-ground fall-recovery tasks and typically rely on hard switching between separate recovery and locomotion controllers. As a result, such policies struggle to achieve smooth and robust recovery behaviors when deployed on complex terrains such as slopes and gravel. This paper presents \textbf{CG-MuTra}, a unified continuously-gated multi-scale discriminator framework for multi-terrain adaptive fall recovery. CG-MuTra introduces a proprioceptively-derived continuous gate $α= f(z_{\mathrm{root}}, s)$ that softly blends three discriminators operating at different temporal horizons: frame-level stability ($Φ_{\mathrm{frame}}$, $H=1$), temporal smoothness ($Φ_{\mathrm{seq}}$, $H=5$), and gait periodicity ($Φ_{\mathrm{gait}}$, $H=10$). This design enables seamless recovery-to-locomotion transitions without explicit mode switching. Furthermore, we propose a Terrain-Pose Risk Coupling Sampler (TPRCS) that explicitly couples dangerous edge initial poses with terrain dynamics during training, forming a closed-loop synergy with the terrain-privileged shaping term $Ξ_κ$. We validate CG-MuTra on a Unitree G1 humanoid across grass, slopes ($10^\circ$--$15^\circ$), and gravel in both simulation and hardware. Experimental results demonstrate that CG-MuTra achieves smooth, highly robust fall recovery and locomotion transitions across multiple terrains while maintaining a single deployable policy.

Urban public transport disruptions require rapid response strategies, yet existing studies rarely provide a decision support framework to compare alternative disruption response solutions using a common set of dynamic, passenger, operator, and environment oriented indicators. This paper proposes a KPI-driven, time-indexed framework to assess the resilience of disruption response solutions in urban transit systems. The framework combines an optimization model with a behavioral evaluation in agent-based simulation. It also underlays the secondary service degradation induced on helper lines when in-service vehicles are withdrawn to support the disrupted corridor. Rather than treating resilience as a single score, it evaluates complementary dimensions including vulnerability, adaptability, robustness, resilience loss, responsiveness, cost-based performance, emissions, and equity. The framework is implemented for the RER B transit line in the Ile-de-France (Paris) network. Results show that the coordinated strategy provides the most balanced resilience profile, combining high service continuity with lower total disruption cost than single mode alternatives, while also improving equity and maintaining competitive environmental performance. Sensitivity analysis further identifies the disruption conditions under which coordinated multimodal response is most valuable.

Human manipulation videos are a convenient and intuitive source for robot learning. However, directly transferring human dexterity to robots remains challenging due to perception errors and embodiment gap. To address this, we introduce Video2Sim2Real, a full-stack framework for autonomous skill acquisition from a single human manipulation video. Our framework first uses off-the-shelf foundation models to reconstruct a simulator-ready digital twin and extract robot and object motion priors. Rather than treating the extracted robot motion as a reliable reference throughout execution, our key idea is to recover and leverage the most fundamental sources of supervision from the demonstrated skill: We identify object-centric keyframes to optimize the corresponding robot configurations using object information from the simulator, and use these configurations as anchors that refine the robot motion such that it ultimately has the desired impact on the environment. To bridge the remaining sim-to-real gap, we introduce a sim-to-real strategy that decouples robustness to noisy and incomplete perception from variations in hand-object interaction dynamics. Specifically, we learn to recalibrate robot configurations from noisy real-world point clouds via IL, and leverage residual RL to perform local finger-level adaptations to ensure for robust and effective interactions. Finally, a collision-aware motion planning module enables spatial generalization to novel object configurations. Across several everyday manipulation tasks, Video2Sim2Real improves simulated task success, safety, and trajectory coherence over numerous baselines, and achieves better sim-to-real transfer than existing techniques. These results demonstrate a promising path toward autonomous dexterous skill acquisition from human videos.

Artificial Intelligence (AI) and Large Language Models (LLMs) are increasingly used in autonomous software testing; however, AI-generated test artifacts often suffer from hallucinations, compliance violations, security risks, and limited explainability. To enhance the reliability, transparency, and trustworthiness of AI-generated testing artifacts, this research introduces the concept of Governance-Aware Autonomous Testing Framework (GATF). The framework extends the autonomous testing lifecycle with governance validation, explainability analysis, probabilistic risk assessment, compliance monitoring, as well as audit governance. Experiments were performed with Defects4J and PROMISE software engineering datasets. The proposed framework successfully reduced the governance-related risks by 89.6% and demonstrated 94.3% accuracy in governance, 96.5% artifact reliability, 94.2% compliance accuracy, and 90.8% explainability performance. The results show that autonomous testing systems that are governance-aware can significantly enhance the reliability, transparency, and operational security of autonomous testing systems in comparison to conventional AI-based testing systems. The proposed architecture is scalable and reliable and provides a safe environment for software testing.

World models are now built on substantially different computational substrates. Latent recurrent state-space models such as PlaNet and the Dreamer family compress observations into recurrent states; token-based models such as IRIS quantize observations into a learned codebook and predict autoregressively with a transformer; and joint-embedding predictive architectures such as I-JEPA predict in a learned latent space with no pixel decoder. The interpretability methods applied to these models, including probing, activation patching, sparse autoencoders, and surprise analysis, share a common set of primitives, yet they are re-implemented from scratch for each architecture because existing hook-and-cache tooling assumes a transformer language model with no notion of actions, environment steps, or imagined rollouts. We argue that this fragmentation reflects the tooling rather than the models, and that the shared structure of world models is captured by a small typed interface. We present WorldModelLens, an open-source interpretability substrate organized around a capability-typed adapter: every model implements four required methods (encode, transition, initial state, sample) and declares a set of optional heads (decode, reward, continue, actor, critic) through an explicit capability descriptor, so that reinforcement-learning and self-supervised world models are first-class without either imitating the other. A single hook and cache layer exposes time-indexed activations, imagination rollouts, and intervention replay over this interface, allowing each analysis to be written once.

We study the problem of auditing a black-box algorithmic decision-maker from observable inputs and outputs alone. Our main result is an exact decomposition: under precisely characterized conditions, the cumulative \emph{regret} of a dynamic policy equals the sum of per-period covariances between the cost vector and the policy's decision. This extends the single-period identity of Aldridge~(2026) to the full multi-period setting of stochastic dynamic programming. We prove the identity holds exactly under i.i.d. costs and mean-unbiased Markov policies, derive closed-form bias corrections for non-stationary and time-varying cases, and establish the discounted-horizon analog. A Bellman recursion for the covariance regret functional connects the result to standard reinforcement learning algorithms; for rolling-window policies, the estimation-error bias is $O(d/w)$. The decomposition has direct implications for algorithmic auditing in strategic environments: in platform mechanism design, it provides a welfare-based audit metric without access to the agent's private type; in repeated games, covariance reduction is a sufficient condition for policy improvement; in procurement and ad auctions, the bias correction quantifies welfare loss from strategic misreporting. The associated trajectory estimator is consistent, asymptotically normal with HAC variance, and computable in $O(T \cdot nd)$ time. This makes the proposed approach a tractable, model-free audit tool for platform mechanisms, algorithmic portfolio strategies, and any sequential decision system subject to external performance review.

Diffusion models have become a powerful tool for generative modeling in robotics, with diffusion policies excelling at modeling multimodal action-trajectory distributions. However, when demonstrations are limited, standard sampling often reproduces dominant behaviors while neglecting valid but rare modes, limiting the discovery of novel solutions. Existing approaches, such as guidance methods or combining reinforcement learning with diffusion, either push samples into infeasible regions or struggle to escape local minima, failing to systematically uncover diverse behaviors. To address these challenges, we propose a framework that combines Feynman-Kac correctors with a novel guiding potential that systematically guides diffusion policy samples towards promising yet underrepresented samples. These trajectories are refined using sampling-based trajectory optimization and reincorporated into the training set to retrain the diffusion policy. Our method effectively mines and repairs novel trajectories, enabling the systematic discovery of diverse and executable behaviors. We demonstrate the effectiveness of our framework across a range of manipulation environments, consistently discovering new behaviors.

Urban last-mile parcel delivery increasingly relies on heterogeneous fleets whose performance depends on timely coordination, reliable communication, and scalable control. Truck-drone collaboration has emerged as a networked cyber-physical delivery paradigm that combines the payload capacity and range efficiency of trucks with the agility of drones in congested or access-limited urban environments. This paper proposes a layered planning and coordination framework that structures truck-drone collaborative delivery (TDCD) from a systems and control perspective. The framework consists of five interrelated layers: spatial-demand alignment, collaborative delivery configuration, resource and workflow orchestration, performance evaluation, and scalability analysis, providing a unified view of coordination, control, and system-level performance in networked delivery operations. The proposed framework is evaluated using a realistic urban last-mile delivery scenario derived from the 2021 Amazon Last Mile Routing Research Challenge dataset. The case study demonstrates how coordinated truck-drone operation, enabled by structured task orchestration and inter-agent synchronization, improves end-to-end system efficiency under operational constraints. Results show a 42.4% reduction in total delivery time and a 44.2% reduction in energy consumption compared to a conventional truck-only delivery model. The scalability analysis further highlights how coordination gains persist as system size increases, and shows the importance of efficient control and communication in heterogeneous delivery networks.

In teleoperation, the human operator typically controls only the end-effector pose, which often leads to self-collisions of the manipulator and collisions with environmental obstacles, since joints and links are not controlled individually. A common strategy to mitigate this issue is to enhance the operator's input using optimal-control-based trajectory planning. As derivative-based solvers require differentiable constraints, existing approaches either approximate robots and obstacles with spheres, reducing geometric accuracy, or approximate derivatives, degrading convergence and increasing computation times. We address these limitations by adapting a recent formulation of differentiable collision-avoidance constraints, based on duality in convex optimization, to the teleoperation setting. The robot is approximated with capsules and the environment with polytopes. We compare the resulting trajectory planning method against state-of-the-art techniques in simulation with varying numbers of obstacles and evaluate it on a UR5e manipulator in a real-world teleoperation test. Results show that our approach achieves lower computation times while enabling more accurate obstacle modeling, leading to smoother and collision-free end-effector teleoperation.

AI coding assistants have significantly improved developer productivity by automatically suggesting code that aligns with user intent, and many of these tools are now integrated directly into Integrated Development Environments (IDEs). Developers interact with code in two distinct cognitive modes: Flow and Command. While developers require tools that directly complete or infill code in unfinished programs during Flow mode, they also need tools that can comprehend intentions expressed as natural-language instructions and convert them into executable code in Command mode. Although instruction-tuned Large Language Models (LLMs) dominate many application scenarios due to their abilities to infer and fulfill developers' intents, it remains unclear whether the same paradigm is equally suitable for different code-related tasks. Therefore, it is necessary to understand how instruction tuning affects the feasibility of CodeLLMs as coding assistants. To fill this gap, we conduct the first empirical study that uncovers a key trade-off caused by instruction tuning across programming modes, which we term the Instruction-Tuning Tax. Our results show that instruction tuning is not a free lunch: although instruction-tuned models are more capable of following instructions and leveraging structured guidance, these gains often come at the cost of weaker infilling performance. We further extend our study through both qualitative and quantitative analyses, including manual failure categorization, behavioral metrics that capture generation fidelity, and intermediate-checkpoint evaluation throughout the tuning process. Summarizing our results into seven findings and four implications, our study offers a new perspective on the development of AI-powered coding tools and highlights the need to carefully balance instruction-following ability with effective code generation assistance.