Bidirectional Long Short-Term Memory

Partially manipulated (half-truth) speech, where a short synthesised segment is spliced into an otherwise genuine utterance, is a harder and more realistic forensic threat than the fully synthesised deepfakes that dominate the literature. We present CAFNet, a lightweight (576K-parameter, 2.24 MB) cross-attentive architecture that fuses MFCC, LFCC, and Chroma-STFT features to jointly classify audio as real, fully fake, or half-truth, and regress the temporal boundaries of the synthesised region, at approximately 14 ms CPU latency. A component ablation shows cross-attention fusion is CAFNet's most load-bearing component; a deeply supervised auxiliary classification head from earlier iterations is not, and removing it improves every in-domain metric under 3-seed replication with substantially lower variance. On MLADDC T2+T3 the model reaches 97.55%$\pm$0.69% ternary accuracy and 0.037 s boundary mean absolute error (MAE), to our knowledge, the first reported continuous splice- boundary localisation result on this benchmark. Zero-shot evaluation on two independent benchmarks shows transfer is capability- and corpus-dependent rather than uniform: on Half-Truth Audio Detection dataset (HAD), detection recall reaches 84.9% and ternary classification resolves half-truth correctly on half of true half-truth clips (50.4%), while on PartialSpoof, binary detection stays near chance (AUC 0.5544). We treat this asymmetry, not a single generalization verdict, as the finding. HAD localisation improves in absolute terms but degrades in relative terms, since in-domain localisation improved faster. An architectural change validated purely in-domain thus shifted the cross-corpus transfer profile, evidence that cross-corpus evaluation should accompany, not follow, in-domain architecture decisions.

We present a unified experiment, analysis, and benchmark study of multivariate time-series (MTS) anomaly detection. Ten family-representative detectors -- spanning statistical, reconstruction, association, frequency, and generic-transformer families -- are evaluated on five datasets (SMD, MSL, SMAP, PSM, and MSDS) under effectiveness, efficiency, robustness, and cross-dataset generalisation. All methods share the same windowing, scoring, hardware, and metric protocols. Effectiveness, ablation, and robustness use three random seeds; cross-dataset transfer uses seed~0 because each extra seed requires $250$ source-target evaluations. The benchmark yields three method-independent findings: no single-bias baseline dominates; absolute perturbation VUS-ROC is more informative than retention ratios; and MSDS behaves as an event-dense deployment workload rather than a sparse point-anomaly benchmark. Under this protocol we also introduce \ours{}, an adaptive detector family combining a NOTEARS-constrained directed channel-graph view with optional patch-attention and temporal-association views. \ours{} achieves the best macro-average VUS-ROC ($0.675$, $+5.1$~pt over the second-best LSTM-AE), ranks first overall, and reaches the top-3 on all five datasets. Its wins on MSL and MSDS are narrow, while its average and robustness gains are larger: under the same three-seed robustness protocol for every method, it obtains the strongest absolute VUS-ROC across noise, channel dropout, and time-shift perturbations. We release the MSDS preprocessing protocol, configurations, scripts, and seed-level metric dumps.

Early battery degradation trajectory forecasting (BDTF), which predicts the full-life state-of-health trajectory from early operational data, is critical for battery optimization, manufacturing, and deployment. Battery degradation data exhibit two key characteristics. First, degradation data present a multi-level structure, including regularities shared within aging conditions and trajectory patterns shared across batteries. Second, degradation-related variations in voltage-current profiles are often localized to specific state of charge (SOC) intervals. Existing approaches often fail to explicitly model these characteristics. To bridge this gap, we propose BatteryMFormer, a multi-level Transformer for early BDTF. BatteryMFormer integrates (1) an aging-condition-aware decoder that injects aging-condition priors via aging-condition-informed queries and aging-condition-aware attention, (2) a meta degradation pattern memory that learns and retrieves trajectory prototypes to guide long-horizon forecasting, and (3) a dual-view encoder that jointly captures temporal dynamics and SOC-localized variations from voltage and current time series. Extensive experiments on four battery domains show that BatteryMFormer consistently outperforms state-of-the-art baselines, marking a significant step toward reliable BDTF. Our code is available at https://github.com/Ruifeng-Tan/BatteryMFormer.

MedER refers to the identification of medical entities. It is crucial for extracting structured clinical information from unstructured medical text. Many existing systems rely on transformer-based models, which are computationally expensive and difficult to deploy in resource-constrained environments. Furthermore, earlier works often use relaxed evaluation metrics that artificially inflate performance by rewarding correct prediction of dominant "Outside" (O) tokens. In this paper, we propose a lightweight Medical Entity Recognition (MedER) framework for the Bangla language. We establish a rigorous baseline using a 12-layer BanglaBERT model combined with a Conditional Random Field (CRF) layer for exact-boundary entity detection. To address deployment constraints, we compress this teacher model into a 4-layer student network through Knowledge Distillation (KD), where the student learns from the teacher's pre-CRF soft emission logits. Finally, we apply INT8 dynamic quantization to further reduce model size and inference cost. Our final quantized student achieves an 8.6x CPU speedup while requiring nearly 48 percent less storage than the CRF teacher model.

World models for partially observed environments must imagine multiple compatible hidden futures and steer between them under counterfactual actions. Joint Embedding Predictive Architectures (JEPAs) do this in latent space, but a vector-valued latent has no internal structure for carrying the belief over hidden continuations through blind rollout. We introduce the Unitary World Model JEPA (UWM-JEPA), a JEPA world model with a density-matrix latent on a joint system-environment space and a learned unitary predictor. The construction preserves the joint-state spectrum exactly during rollout, so the predictor itself cannot dissipate the represented uncertainty. On a hidden-velocity indicator task requiring five-step forward simulation under a given action sequence with the target observation masked, UWM-JEPA reaches 0.77 accuracy and degrades monotonically as actions are perturbed; a parameter-matched LSTM-JEPA trained under the same counterfactual-target objective and action head collapses to majority-class accuracy (0.53) under every action condition. Under blind rollout, UWM-JEPA loses fewer than ten points of probe R^2 at short horizons while vector-latent baselines lose forty-one and sixty-eight; both nevertheless tie on a held-out context probe, locating the separation in the predictor rather than the encoder. Action sensitivity itself requires training against counterfactual rather than teacher-forced targets, a finding that applies beyond the unitary parameterisation. For JEPA world models to imagine under partial observability, latent geometry and predictor dynamics matter, not frozen context-encoding capacity alone.

Aggressive driving is a major cause of traffic accidents and poses a serious threat to road safety. Although deep learning methods have shown promising results in detecting risky driving behaviours from vehicle sensor data, their performance in real-world conditions is often limited by severe data imbalance, large variability between drivers, and the lack of physically interpretable vehicle dynamics representations. In this paper, we propose an enhanced deep learning framework for aggressive driving detection using multivariate vehicle dynamics signals. Instead of relying solely on raw measurements, the proposed approach constructs engineered dynamic features that capture steering, acceleration, and braking behaviour. To address the extreme rarity of aggressive events in naturalistic driving data, we introduce a stable training strategy that combines controlled SMOTE-based oversampling with a class-weighted loss formulation, and evaluates focal loss variants for imbalance handling. Furthermore, a safety-oriented decision strategy based on class-specific threshold calibration is adopted to better reflect the asymmetric risks of missed detections and false alarms in real-world applications. The proposed framework is evaluated on a newly collected naturalistic driving dataset. Extensive experiments show that the proposed method consistently outperforms standard deep learning baselines with significant improvements in minority-class recall and safety-critical F-score metrics while maintaining practical computational efficiency. Code: \url {https://github.com/halhamdan/CBANet}

Reliable seizure prediction is a prerequisite for closed-loop neurostimulation therapy, yet existing methods rarely account for the variability in EEG signal quality encountered in real-world deployment, and the overwhelming majority adopt non-strict evaluation protocols that overestimate generalisation performance. We propose CLSP-REQA (Closed-Loop Seizure Prediction with Real-time EEG Quality Assessment), a unified framework that embeds a lightweight signal quality estimator directly within the prediction pipeline. A Real-time EEG Quality Assessment (REQA) module runs in parallel with a Mamba-BiLSTM backbone, producing a scalar quality score q in [0,1] that modulates output confidence through a tiered non-linear fusion function (ECLO). Under strict cross-patient evaluation on the CHB-MIT Scalp EEG Database (n = 23 subjects, 198 seizures), CLSP-REQA achieves an AUC-ROC of 0.7426 +- 0.0199, outperforming the unadapted cross-patient baseline of 0.69 reported by Jemal et al., using only 16 EEG channels compared to 23 in prior work, and without requiring any target-patient data or domain adaptation. On the SIENA Scalp EEG Database (n = 14 subjects, 47 seizures), CLSP-REQA achieves AUC 0.7012 +- 0.0249, substantially surpassing the best domain-adapted cross-patient result of 0.61 on the same dataset, demonstrating strong cross-dataset generalisation. The framework outputs a structured four-tuple (p, q, c, Phi_SHAP) directly compatible with closed-loop neurostimulator interfaces.

Full-duplex spoken dialogue models (SDMs) can listen and speak simultaneously, enabling interaction dynamics closer to human conversation than turn-based systems. Inspired by neural coupling in human communication, we study how such models coordinate their internal representations during interaction. We simulate full-duplex dialogues between two instances of the pretrained \textit{Moshi} model under controlled conditions, manipulating channel noise and decoding bias. Synchronization is measured using Centered Kernel Alignment (CKA) across temporal lags, while anticipatory turn-taking cues are probed from delayed internal activations using causal LSTM models, from both speaker and listener perspectives. We find strong representational synchronization under no noise conditions, peaking near zero lag and degrading with noise, and we show that internal states encode anticipatory information that supports turn-taking prediction ahead of time.

The rapid adoption of deep learning has increasingly led to data-driven models replacing classical model-based algorithms, even in domains governed by well-understood physical laws. While data-driven models, such as long short-term memory (LSTM) networks, have become a popular choice for time-series analysis, their performance relative to model-based approaches in structured environments is rarely evaluated objectively. This paper presents a performance evaluation framework comparing an LSTM classifier against a model-based expectation maximization (EM) classifier for binary time-series classification. The evaluation is conducted on two scalar linear Gaussian state space models differing only in their noise statistics, where the Kalman filter likelihood ratio test with true parameters serves as a reference for the best achievable classification performance.Through Monte Carlo simulations, the classifiers are evaluated across three axes: task difficulty, controlled by the separation in process or measurement noise between the two models; sequence length; and training dataset size. The results show that the EM classifier, which exploits the known model structure, performs strongly when the data conform to the assumed model class. The LSTM classifier requires a larger separation in noise statistics to achieve reliable classification, and its performance saturates below the reference classifier when the models differ only in measurement noise, regardless of sequence length or training dataset size.

This paper compares gradient boosting and long short-term memory (LSTM) architectures for intraday directional prediction in Micro E-Mini Nasdaq 100 futures (MNQ). Motivated by recent foundation-model research on financial candlestick data, including the Kronos architecture, we test whether five-minute OHLCV bar sequences contain exploitable sequential predictive structure at the scale of a single instrument dataset. Using 944 trading days from 2021-2025, four model configurations are evaluated under strict expanding-window walk-forward validation across three out-of-sample periods. The target variable is whether the session close exceeds the 10:30 AM open by more than ten points. No configuration produces statistically significant out-of-sample accuracy above the 51.8% base rate. Combined OOS accuracies range from 50.00% to 50.89% across gradient boosting variants, while the LSTM achieves 50.59%. Permutation tests yield p-values of 0.135 for the best gradient boosting model and 0.515 for the LSTM, indicating no statistically significant predictive edge. Feature importance instability across walk-forward folds suggests noise fitting rather than stable structural signal capture. The results indicate that four years of single-instrument five-minute OHLCV data are insufficient for reliable sequential ML-based intraday forecasting. The primary contribution is a documented evaluation of a Kronos-inspired architecture on a constrained real-world dataset, providing an empirical lower bound on data scale requirements for sequential financial ML.

Accurate long-horizon glucose forecasting is critical for automated insulin delivery systems, which help people with type 1 diabetes (T1D) manage their glucose and avoid dangerous hypoglycemia. However, standard recursive long short-term memory (LSTM) networks suffer from systematic negative bias at longer horizons due to error compounding, while purely mechanistic ordinary differential equation (ODE) models fail to generalize across individuals when parameterized at the population level. We propose PhysioSeq2Seq, a hybrid architecture that combines patient-specific physiological modeling with a sequence-to-sequence (Seq2Seq) LSTM. For each glucose segment, twin matching searches a population of 300 parameterized digital twins to identify the best-fitting physiological match from a 3-hour continuous glucose monitoring (CGM) history. The 10 internal ODE state variables of the matched twin are injected as exogenous covariates into both the encoder and decoder of the Seq2Seq LSTM. This simultaneous 48-step prediction strategy eliminates recursive error compounding, while the ODE features provide a physics-grounded constraint that bounds long-horizon drift within physiologically plausible ranges. PhysioSeq2Seq was trained on CGM and insulin data from 348 participants in the Type 1 Diabetes Exercise Initiative (T1DEXI) dataset and evaluated on 74 held-out participants. At the 240-minute horizon, PhysioSeq2Seq achieves a mean absolute error of 39.28 mg/dL and a mean error of -10.62 mg/dL, reducing bias by 13.89 mg/dL over the recursive LSTM and reducing mean absolute error by 28.62 mg/dL over the ODE-based digital twin. These results show that eliminating architectural feedback and injecting patient-matched physiological states is an effective and clinically meaningful strategy for long-horizon glucose forecasting in T1D.

Heatwaves are an important problem in cities, and climate change makes this problem more difficult. In this paper, we present a GPU-based deep learning framework for next-day prediction of urban thermal conditions and for heat risk assessment. The study was carried out in Sarajevo by using MODIS land surface temperature data and Open-Meteo forecast data. We tested several models, including convolutional models and spatiotemporal models. Among them, ConvLSTM with a mixed loss function gave the best results. The obtained values were MAE = 0.2293, RMSE = 0.3089, and R2 = 0.8877. The experiments also showed that results can be improved by using longer temporal series and additional meteorological variables. Since the framework was implemented on a GPU and trained with mixed precision, the execution time was reduced. Based on the predicted temperature fields, it was also possible to combine hazard information with exposure and vulnerability data in order to generate city heat risk maps. The proposed framework can be used as a practical basis for city heat analysis.

The choice of optimiser is important in deep learning, as it strongly influences model efficiency and speed of convergence. However, many commonly used optimisers encounter difficulties when applied to imbalanced and sequential datasets, limiting their ability to capture patterns of minority classes. In this study, we propose Dynamic Batch-Sensitive Adam (DBS-Adam), an optimiser that dynamically scales the learning rate using a batch difficulty score derived from exponential moving averages of gradient norms and batch loss. DBS-Adam improves training stability and accelerates convergence by increasing updates for difficult batches and reducing them for easier ones. We evaluate DBS-Adam by integrating it with Bi-Directional LSTM networks for accident injury severity prediction, addressing class imbalance through SMOTE-ENN resampling and Focal Loss. Four experimental configurations compare baseline Bi-LSTM models and alternative architectures to assess optimiser impact. Rigorous comparison against state-of-the-art optimisers (AMSGrad, AdamW, AdaBound) across five random seeds demonstrated DBS-Adam's competitive performance with statistically significant precision improvements (p=0.020). Results indicate that DBS-Adam outperforms standard optimisation approaches, achieving 95.22% test accuracy, 96.11% precision, 95.28% recall, 95.39% F1-score, and a test loss of 0.0086. The proposed framework enables effective real-time accident severity classification for targeted emergency response and road safety interventions, demonstrating the value of DBS-Adam for learning from imbalanced sequential data.

Spike activity has been the dominant neural signal for behavior decoding due to its high spatial and temporal resolution. However, as brain-computer interfaces (BCIs) move toward high channel counts and wireless operation, the high sampling frequency of spike signals becomes a bottleneck due to high power and bandwidth requirements. Local field potentials (LFPs) represent a different spatial-temporal scale of brain activity compared to spikes, offering key advantages including improved long-term stability, reduced energy consumption, and lower bandwidth requirement. Despite these benefits, LFP-based decoding models typically show reduced accuracy and often rely on non-causal architectures that are unsuitable for real-time deployment. To address these challenges, we propose REALM: a retrospective distillation framework that enables causal LFP decoding. Inspired by offline-to-online distillation strategies in speech recognition, REALM transfers representational knowledge from a pretrained multi-session bidirectional LFP model to a causal version for real-time deployment. We first pretrain a bidirectional Mamba-2 teacher model using a masked autoencoding objective. We then distill this teacher model into a compact student model via a combined objective of representation alignment and task supervision. REALM consistently outperforms both causal and non-causal LFP-based SOTA methods for behavior decoding. Notably, our REALM improves decoding performance while achieving a $2\times$ reduction in parameter count and a $10\times$ reduction in training time. These results demonstrate that retrospective distillation effectively bridges the gap between offline and real-time neural decoding. REALM shows that LFP-only models can achieve competitive decoding performance without reliance on spike signals, offering a practical and scalable alternative for next-generation wireless implantable BCIs.

Volumetric Modulated Arc Therapy (VMAT) is a cornerstone of modern radiation therapy, enabling highly conformal tumor irradiation and healthy-tissue sparing. Yet, its planning solves inverse and nested optimization for multi-leaf collimators, monitor units and dose parameters, while enforcing their consistency to ensure mechanical deliverability. Nevertheless, this process often requires repeated re-optimization when treatment configurations change, resulting in substantial planning time per patient. To address these problems, we present a diffusion-driven Learning-to-Optimize (L2O) method for end-to-end VMAT planning. A distribution-matching distilled diffusion model learns a clinically feasible manifold of fluence maps, enabling their one-shot generation. On top of this, an LSTM-based L2O module learns gradient update dynamics to swiftly refine fluence maps toward prescribed dose objectives during inference. Experimental results on clinical and public prostate cancer cohorts demonstrate improved planning efficiency, flexibility, and machine deliverability over currently available end-to-end VMAT planners.

The efficient operation of modern cellular networks hinges on the accurate analysis of spatio-temporal traffic data. Mastering these patterns is essential for core network functions, chiefly forecasting future load to pre-empt congestion and imputing missing values caused by sensor failures or transmission errors to ensure data continuity. While deeply connected, forecasting and imputation have historically evolved as separate sub-fields. The dominant paradigm, Spatio-Temporal Graph Neural Networks (STGNNs), while effective, are often specialized, computationally intensive, and exhibit limited generalization. Concurrently, adapting large pre-trained language models (LLMs) offers a powerful alternative for sequence modeling, yet existing approaches provide weak structural guidance, leading to unstable convergence and a narrow focus on forecasting. To bridge these gaps, we propose U-STS-LLM, a unified framework built on a spatio-temporally steered LLM. Our core innovation is a Dynamic Spatio-Temporal Attention Bias Generator that synthesizes a persistent functional graph with transient nodal states to explicitly steer the LLM's attention. Coupled with a partially frozen backbone tuned via Low-Rank Adaptation (LoRA) and a Gated Adaptive Fusion mechanism, the model achieves stable, parameter-efficient adaptation. Trained under a unified multi-task objective, U-STS-LLM learns a holistic data representation. Extensive experiments on real-world cellular datasets demonstrate that U-STS-LLM establishes new state-of-the-art performance in both long-horizon forecasting and high-missing-rate imputation, while maintaining remarkable training efficiency and stability, offering a novel blueprint for harnessing foundation models in structured, non-linguistic domains.

Accurate short-term demand forecasting is crucial to airline revenue management, yet most existing systems fail to meet this need because current models treat booking data as a single temporal dimension, either the accumulation of bookings for a specific flight or the historical booking profile of the same route. This unidimensional view discards information carried by the other temporal stream and forecasting absolute passenger counts introduces a further operational fragility when change in planned aircraft type alters total seat capacity. This study addresses both limitations. A dual-stream Long Short-Term Memory (LSTM) integrated with attention framework is proposed that simultaneously processes two complementary input sequences: a horizontal sequence capturing intra-flight booking accumulation over the days preceding departure, and a vertical sequence capturing inter-flight booking patterns at fixed days-before-departure offsets across historical flights. Multiple dual-stream architectural variants, combining self-attention, cross-attention, and hybrid attention with concatenation, residual, and gated fusion strategies, are developed and evaluated. Experiments on real-world reservation data from the national airline of Bangladesh, Biman Bangladesh Airlines (BBA), demonstrate that the proposed hybrid model achieves a Mean Absolute Error of 2.8167 and a coefficient of determination ($R^{2}$) of 0.9495, outperforming single-stream baselines, tree-based models, and three prior dual-LSTM architectures applied to the same data. Validation across four flight category pairs; domestic versus international, direct versus transit, high versus low frequency, and short versus mid versus long haul confirms that the model generalizes across operationally diverse route types. Biman Bangladesh Airlines (BBA) has officially integrated this methodology into its operations.

Obtaining an accurate short-term forecasting for heat demand is an essential part of operating district heating networks cost-efficient and reliable. Heat consumption time series at the building level are highly dependent on exogenous variables such as outdoor temperature and individual usage patterns, making forecasting in this context a challenging task. Thus, this paper benchmarks novel Transformer-based and xLSTM architectures for short-term heat-demand forecasting. Using hourly data from 25 German buildings (2017-2025), we compare three-hour and 24-hour forecasting horizons relevant for intraday control and day-ahead scheduling. We establish a multi-building benchmark that tests whether models trained on pooled, heterogeneous building data are able to generalize across diverse building stock. The results show that the xLSTM achieves the lowest RMSE (19.88 kWh for three-hour, 21.47 kWh for 24-hour forecasts), while the Temporal Fusion Transformer attains the best MAE (9.16 kWh for three-hour forecasts). As xLSTMs and Transformers require long training times and have a huge number of trainable parameters, their sustainability remains questionable. Therefore, this paper further investigates the trade-off between predictive accuracy and computational resource demand of the evaluated forecasting models. The findings indicate that also low-parameter models like a traditional fully-connected network achieve good predictive results, highlighting that marginal accuracy gains of the novel prediction models come at substantial resource expense for this use case.

Accurate 3D brain MRI subtype classification benefits from both localized anatomical cues and long-range contextual reasoning. We present AGA3DNet, a report-grounded framework that incorporates brief anatomical phrases extracted from radiology reports as a soft anatomical prior channel and fuses it with a lightweight 3D CNN and multi-view xLSTM aggregation. Specifically, extracted anatomical phrases are mapped to atlas-defined regions and converted into smooth spatial priors using a signed-distance transform followed by Gaussian weighting, providing interpretable, anatomy-grounded guidance without requiring dense voxel annotations. We evaluate AGA3DNet on a retrospective institutional brain MRI cohort for abnormal subtype discrimination and compare against reproducible 3D classification baselines. AGA3DNet achieves improved overall balance across performance metrics and supports clinically interpretable localization through the prior channel. We discuss limitations related to single-cohort evaluation and the lack of large-scale public brain MRI datasets paired with radiology reports under broadly usable terms.

The exponential growth of social media has created an urgent need for automated systems to analyze unstructured public sentiment in real time. This study compares a traditional Logistic Regression model using TF-IDF features with a deep learning Bidirectional Long Short-Term Memory (BiLSTM) architecture on a 10,000-tweet subset of the Sentiment140 dataset. Experimental results show that Logistic Regression outperformed BiLSTM, achieving an accuracy of 73.5% compared with 69.17%, while the deep learning model exhibited mild overfitting. These findings suggest that for medium-scale informal text data, classical machine learning with robust feature extraction can outperform more complex deep learning approaches. Finally, the trained models were integrated into an interactive web application using Streamlit and deployed on Hugging Face Spaces for public access.

This paper compares a PyCaret AutoML branch and a CNN-BiLSTM branch for binary hate speech detection on Indonesian Twitter using the HS label from the corpus of Ibrohim and Budi. Both branches share the same preprocessing pipeline so that the comparison reflects modelling differences rather than inconsistent data preparation. The conventional branch uses TF-IDF with a lexicon-based abusive-word count, whereas the neural branch learns dense token representations and captures both local phrase patterns and bidirectional context. The benchmark is built from the released 13,130-row annotation table, whose HS label yields a 58:42 class ratio. On the held-out split, CNN-BiLSTM achieves the best result with 83.8% accuracy, 79.8% precision, 82.7% recall, and 81.2% F1-score. Within the PyCaret branch, Random Forest is the strongest conventional model with 77.2% accuracy and 77.0% F1-score. The neural branch therefore improves accuracy by 6.6 points and F1-score by 4.2 points. Exploratory corpus analysis, learning curves, and confusion matrices show that the dataset is short-text, moderately imbalanced, and still difficult because many decisions depend on local lexical cues plus short contextual composition. The study concludes that PyCaret AutoML is an effective conventional benchmarking framework, whereas CNN-BiLSTM is the stronger end model for the reported benchmark setting.

This paper benchmarks classical machine learning and deep learning approaches for three-class sentiment classification of Indonesian Spotify reviews. Using 100,000 scraped reviews and 70,155 cleaned samples, the study compares Support Vector Machine, Multinomial Naive Bayes, and Decision Tree models with a two-layer BiLSTM. Both approaches use the same preprocessing pipeline, including slang normalization, stopword removal, and stemming. Decision Tree achieves the best performance among the classical models, while BiLSTM attains the highest weighted F1-score overall but fails on the minority neutral class. The paper concludes that BiLSTM is stronger for overall sentiment detection, whereas machine learning with SMOTE provides more balanced three-class performance.

Electrocardiogram (ECG) biometrics have emerged as a promising modality for continuous, liveness-aware authentication in wearable systems. However, many prior studies report overly optimistic results due to data leakage (e.g., random splits within the same session). To address this issue, we introduce ECG-biometrics-bench, a modular, reproducible benchmarking framework that standardizes preprocessing, segmentation, and evaluation across seven widely used public ECG datasets spanning clinical, ambulatory, and large-scale cohort settings. The framework supports both closed-set and open-set (i.e., subject-disjoint generalization in this work) evaluation, as well as progressively realistic protocols including cross-session and long-term temporal separation. To facilitate reproducible research in the community, the ECG-biometrics-bench repository will be made publicly accessible on GitHub upon the acceptance of this manuscript. Through a comprehensive multi-dataset analysis, we expose the Random Split Fallacy, demonstrating that intra-session evaluation protocols artificially inflate performance while masking severe degradation caused by temporal drift and unseen identities. Furthermore, by evaluating multiple architectures, including DeepECG, ResNet1D, and CNN-LSTM, we show that these failures are not model-specific but are likely inherent to current supervised feature-learning paradigms. Finally, we demonstrate that performance degradation due to temporal aging can be partially mitigated through a heavy enrollment, lightweight authentication strategy based on dynamic multi-session template fusion. These findings establish a more realistic baseline for ECG biometrics and highlight critical challenges that must be addressed for reliable real-world deployment.

This study presents a comparative analysis between two primary approaches in Natural Language Processing (NLP): Machine Learning (ML) utilizing the PyCaret AutoML framework, and Deep Learning (DL). The evaluation is conducted on a sentiment analysis task using an Indonesian e-commerce review dataset sourced from Hugging Face. The dataset, consisting of 15,000 samples, is partitioned into training, validation, and testing sets. The ML experiments compare LightGBM, Logistic Regression, and Support Vector Machine (SVM) algorithms, whereas the DL experiment implements a Bidirectional Long Short-Term Memory (BiLSTM) architecture. The experimental results demonstrate that the BiLSTM model outperforms all ML models, achieving an accuracy of 98.87% and an F1-Score of 98.87%. Meanwhile, LightGBM emerges as the best-performing ML model with an accuracy of 98.23% in a highly efficient training time. This research proves that the BiLSTM architecture is highly capable of capturing the sequential context of Indonesian review texts, making it the superior model for this specific classification task.

This paper compares Machine Learning and LSTM-based Deep Learning methods for sentiment analysis of Mobile Legends app reviews. Using a dataset of 10,000 reviews labeled as positive, negative, and neutral, the study evaluates traditional models with TF-IDF and PyCaret AutoML and compares them against an LSTM model designed to capture sequential text dependencies. The results show that the LSTM model outperforms the classical Machine Learning baselines, achieving 92% accuracy and a weighted F1-score of 91%. The findings indicate that deep learning is more effective for handling informal and context-dependent user review text.

This paper investigates sentiment classification of Steam game reviews using an attention-based Bidirectional Long Short-Term Memory (BiLSTM) model. Using a dataset of 50,000 reviews sampled from a larger Steam review corpus, the authors compare a traditional machine learning baseline based on TF-IDF and PyCaret AutoML with a deep learning approach implemented in PyTorch. The proposed BiLSTM+Attention model is trained with class-weighted cross-entropy to address class imbalance and achieves 83% accuracy and 85% weighted F1-score on the test set, with 90% recall for negative reviews. The paper also presents attention visualizations to show interpretability by highlighting sentiment-bearing words. The study concludes that the BiLSTM+Attention model is effective for analyzing user sentiment in Steam reviews and useful for helping developers understand player feedback.

The record of the beginning of the most widespread legal system in the world is contained in millions of pages of handwritten text. Most of the records of the first centuries of the Anglo-American legal system are hand-written in a highly abbreviated form of medieval Latin which only a few dozen scholars in the world are trained to read. In this interdisciplinary project, we construct a dataset of 4029 lines of text across 193 medieval criminal and civil cases. We then use the dataset to train an open-source end-to-end pipeline for transcribing these manuscripts. We first train standard neural network architectures for line segmentation and handwriting recognition (R-Blla and CNN+LSTM with CTC decoding, respectively) and show that they can already achieve 79% word accuracy, despite the relatively small training set and the challenge of expanding abbreviations. We then demonstrate that simple post-processing significantly boosts accuracy: adding an n-gram language model to the CTC decoder improves word accuracy to 82%, while asking Gemini Pro 3 to correct mistakes boosts accuracy to 88%. Finally, we compare the CNN+LSTM architecture with TrOCR, a transformer-based OCR architecture, demonstrating that TrOCR shows comparable word accuracy but worse character accuracy due to its over-willingness to guess, making it harder for humans to infer the correct reading. We incorporated our pipeline into a web portal (glyphmachina.com), opening up the English legal tradition to legal scholars, medievalists, and students.

Remaining Useful Life (RUL) estimation is a critical component of Prognostics and Health Management (PHM), enabling proactive maintenance scheduling and reducing unplanned failures in industrial equipment. This paper presents a comparative study of machine learning approaches for RUL estimation on the NASA C-MAPSS turbofan engine dataset: classical baselines (Ridge Regression, Polynomial Ridge, and XGBoost), a 1D Convolutional Neural Network (CNN), and a Long Short-Term Memory (LSTM) network. All models are evaluated on the FD001 and FD003 subsets under an identical preprocessing pipeline to ensure a fair comparison. Among raw-sequence models, the LSTM achieves RMSE of 14.93 and 14.20 on FD001 and FD003 respectively, outperforming the deep LSTM reported by Zheng et al.~\cite{paper} (RMSE 16.14 and 16.18) despite using a simpler single-layer architecture. The 1D CNN achieves RMSE of 16.97 on FD001 and 15.68 on FD003, demonstrating competitive performance on FD003 while producing more conservative RUL predictions on FD001. Ridge Regression is evaluated on raw and engineered features, while other classical models use only engineered inputs. XGBoost achieves an RMSE of 13.36 on FD003, highlighting the competitiveness of nonlinear modeling.

Fine-grained emotion classification, which identifies specific emotional states such as happiness, anger, sadness, and fear, remains a challenging task in natural language processing. This study benchmarks classical machine learning and deep learning approaches for 20-class emotion classification using the 20-Emotion Text Classification Dataset containing 79,595 English sentences. On the machine learning side, Logistic Regression, Multinomial Naive Bayes, and Support Vector Machine are evaluated using TF-IDF features. On the deep learning side, Bidirectional Long Short-Term Memory, Gated Recurrent Unit, and a lightweight Transformer implemented in PyTorch are compared. The results show that BiLSTM achieves the best overall performance with 89% accuracy and a weighted F1-score of 0.89, slightly outperforming the best machine learning model, SVM, which reaches 88.11% accuracy. The findings indicate that while traditional machine learning models remain competitive and computationally efficient, sequence-based deep learning models better capture contextual emotional cues in text.

This study compares machine learning and deep learning approaches for cyberbullying detection in Indonesian-language Instagram comments. Using a balanced dataset of 650 comments labeled as Bullying and Non-Bullying, the study evaluates Naive Bayes, Logistic Regression, and Support Vector Machine with TF-IDF features, as well as BiLSTM and BiLSTM with Bahdanau Attention. A preprocessing pipeline tailored to informal Indonesian text is applied, including slang normalization, stopword removal, and stemming. The results show that Logistic Regression performs best among the machine learning models, while BiLSTM with Attention achieves the strongest overall deep learning performance. The findings highlight the value of domain-specific preprocessing and show that although deep learning captures contextual patterns more effectively, machine learning remains a competitive option for resource-constrained deployments.

Sentiment analysis of product reviews on e-commerce platforms plays a critical role in automatically understanding customer satisfaction and providing actionable insights for sellers seeking to improve product quality. This paper presents a comprehensive benchmarking study comparing a Machine Learning (ML) approach via the PyCaret AutoML framework against a Deep Learning (DL) approach based on a Bidirectional Long Short-Term Memory (BiLSTM) architecture with an Attention mechanism for binary sentiment classification on Indonesian product reviews. The dataset comprises 19,728 samples balanced equally between positive and negative reviews. For the ML approach, three prominent algorithms were evaluated via 10-fold stratified cross-validation: Logistic Regression (LR), Support Vector Machine (SVM) with a linear kernel, and Light Gradient Boosting Machine (LightGBM). Logistic Regression achieved the best ML performance with an accuracy of 97.26% and an F1-score of 97.26%. The BiLSTM with Attention model, evaluated on 3,946 held-out test samples, achieved an accuracy of 97.24% and an F1-score of 97.24%. These comparative results demonstrate that traditional ML algorithms with proper preprocessing and feature extraction can compete closely with, and even marginally outperform, more complex sequential DL architectures on high-dimensional datasets, while simultaneously offering greater computational efficiency.

This paper benchmarks a classical machine learning approach based on PyCaret AutoML against a deep learning approach based on IndoBERT fine-tuning for binary sentiment analysis of Indonesian-language Twitter comments related to Ibu Kota Nusantara (IKN). The dataset contains 1,472 manually labeled samples, consisting of 780 negative and 692 positive comments. In the machine learning setting, Logistic Regression, Naive Bayes, and Support Vector Machine were evaluated using 10-fold cross-validation, with Logistic Regression achieving the best performance among the classical models at 77.57% accuracy and 77.17% F1-score. In the deep learning setting, the indobenchmark/indobert-base-p1 model was fine-tuned for five epochs and achieved 89.59% test accuracy and 89.37% F1-score. The results show that IndoBERT substantially outperforms the machine learning baselines, highlighting the effectiveness of Transformer-based contextual representations for informal Indonesian social media text.

Indonesian marketplace reviews mix standard vocabulary with slang, regional loanwords, numeric shorthands, and emoji, making lexicon-based sentiment tools unreliable in practice. This paper describes a two-track classification pipeline applied to the PRDECT-ID dataset, which contains 5,400 product reviews from 29 Indonesian e-commerce categories, each labeled for binary sentiment (Positive/Negative) and five-class emotion (Happy, Sad, Fear, Love, Anger). The first track applies TF-IDF vectorization with a PyCaret AutoML sweep across standard classifiers. The second track is a PyTorch Bidirectional Long Short-Term Memory (BiLSTM) network with a shared encoder and two task-specific output heads. A preprocessing module applies 14 sequential cleaning steps, including a 140-entry slang dictionary assembled from marketplace corpora. Four configurations are benchmarked: BiLSTM Baseline, BiLSTM Improved, BiLSTM Large, and TextCNN. Training uses class-weighted cross-entropy loss, ReduceLROnPlateau scheduling, and early stopping. Both tracks are deployed as Gradio applications on Hugging Face Spaces. Source code is publicly available at https://github.com/ikii-sd/pba2026-crazyrichteam.

Short term electricity price forecast is essential in competitive power markets, yet electricity price series exhibit high volatility, irregularity, and non-stationarity. This phenomenon is pronounced in the South Australian region of the National Electricity Market, where high renewable penetration drives price volatility and frequent negative price intervals, while structural changes such as the transition to five-minute settlement further complicate forecast. To address these challenges, this study develops a unified benchmark framework. Under identical data preprocessing, feature engineering with lag features, rolling statistics, cyclic temporal encodings, and so on, and an 85% to 15% chronological train test split, six algorithms are systematically compared, including AWMLSTM, CatBoost, GBRT, LSTM, LightGBM, and SVR. The results show that for price prediction, tree-based models, especially GBRT with an R squared value of 0.88, generally outperform LSTM and SVR. However, all models achieve a mean absolute percentage error above 90%, and more than 65% of GBRT predictions have relative errors above 10%, which highlights the inherent difficulty of price forecast. For demand prediction, all models perform substantially better than in price prediction. AWMLSTM and GBRT achieve an R2 value of 0.96 with mean absolute percentage error below 32%, and GBRT has 74.37% of samples within 5% error, while LSTM and SVR perform less accurately in both tasks. Future improvements should focus on hybrid models such as tree plus transformers, data augmentation for extreme events, and error correction to better capture price spikes.

Low-cost air quality sensors (LCS) provide a practical alternative to expensive regulatory-grade instruments, making dense urban monitoring networks possible. Yet their adoption is limited by calibration challenges, including sensor drift, environmental cross-sensitivity, and variability in performance from device to device. This work presents a deep learning framework for calibrating LCS measurements of PM$_{2.5}$, PM$_{10}$, and NO$_2$ using a Long Short-Term Memory (LSTM) network, trained on co-located reference data from the OxAria network in Oxford, UK. Unlike the Random Forest (RF) baseline, which treats each observation independently, the proposed approach captures temporal dependencies and delayed environmental effects through sequence-based learning, achieving higher $R^2$ values across training, validation, and test sets for all three pollutants. A feature set is constructed combining time-lagged parameters, harmonic encodings, and interaction terms to improve generalization on unseen temporal windows. Validation of unseen calibrated values against the Equivalence Spreadsheet Tool 3.1 demonstrates regulatory compliance with expanded uncertainties of 22.11% for NO$_2$, 12.42% for PM$_{10}$, and 9.1% for PM$_{2.5}$.

This paper presents a personalized Battery Electric Vehicle (BEV) energy consumption estimation framework that integrates map-based contextual features with driver-specific velocity prediction and physics-based energy consumption modeling. The system combines route selection, detailed road feature processing, a rule-based reference velocity generator, a PID controller-based vehicle dynamics simulator, and a Bidirectional LSTM model trained to reproduce individual driving behavior. The predicted individual-specific velocity profiles are coupled with a quasi-steady backward energy consumption model to compute tractive power, regenerative braking, and State-of-Charge (SOC) evolution. Evaluation across urban, freeway, and hilly routes demonstrates that the proposed approach captures key driver behavioral patterns such as deceleration at intersections, speed-limit tracking, and road grade-dependent responses, while producing accurate power and SOC trajectories. The results highlight the effectiveness of combining learned driver behavior with map-based context and physics-based energy consumption modeling to produce accurate, personalized BEV SOC depletion profiles.

End-to-end OCR for historical newspapers remains challenging, as models must handle long text sequences, degraded print quality, and complex layouts. While Transformer-based recognizers dominate current research, their quadratic complexity limits efficient paragraph-level transcription and large-scale deployment. We investigate linear-time State-Space Models (SSMs), specifically Mamba, as a scalable alternative to Transformer-based sequence modeling for OCR. We present to our knowledge, the first OCR architecture based on SSMs, combining a CNN visual encoder with bi-directional and autoregressive Mamba sequence modeling, and conduct a large-scale benchmark comparing SSMs with Transformer- and BiLSTM-based recognizers. Multiple decoding strategies (CTC, autoregressive, and non-autoregressive) are evaluated under identical training conditions alongside strong neural baselines (VAN, DAN, DANIEL) and widely used off-the-shelf OCR engines (PERO-OCR, Tesseract OCR, TrOCR, Gemini). Experiments on historical newspapers from the Bibliotheque nationale du Luxembourg, with newly released >99% verified gold-standard annotations, and cross-dataset tests on Fraktur and Antiqua lines, show that all neural models achieve low error rates (~2% CER), making computational efficiency the main differentiator. Mamba-based models maintain competitive accuracy while halving inference time and exhibiting superior memory scaling (1.26x vs 2.30x growth at 1000 chars), reaching 6.07% CER at the severely degraded paragraph level compared to 5.24% for DAN, while remaining 2.05x faster. We release code, trained models, and standardized evaluation protocols to enable reproducible research and guide practitioners in large-scale cultural heritage OCR available at https://github.com/MarcoPerson/ssm-ocr-benchmark.

There have been numerous attempts to distill quadratic attention-based large language models (LLMs) into sub-quadratic linearized architectures. However, despite extensive research, such distilled models often fail to match the performance of their teacher LLMs on various downstream tasks. We set out the goal of lossless distillation, which we define in terms of tolerance-corrected Win-and-Tie rates between student and teacher on sets of tasks. To this end, we introduce an effective distillation pipeline for xLSTM-based students. We propose an additional merging stage, where individually linearized experts are combined into a single model. We show the effectiveness of this pipeline by distilling base and instruction-tuned models from the Llama, Qwen, and Olmo families. In many settings, our xLSTM-based students recover most of the teacher's performance, and even exceed it on some downstream tasks. Our contributions are an important step towards more energy-efficient and cost-effective replacements for transformer-based LLMs.

Accurate blood glucose forecasting using continuous glucose monitoring (CGM) data can support the early prediction of dysglycemic risk. However, current neural-network-based forecasting models treat CGM data as a purely numerical sequence without integrating the contextual information contained in CGM signal morphology. Recently, large language models (LLMs) have shown promise for time-series forecasting, yet their role as agentic context extractors in diabetes care remains largely unexplored. In this study, we bridge glucose forecasting and LLM-based contextualization by developing GlyRAG, a context-aware, retrieval-augmented forecasting framework that uses an LLM as a contextualization agent to summarize glucose morphology directly from a timed CGM window. The generated CGM-only narrative is embedded and fused with patch-based glucose representations, while a retrieval module incorporates similar historical training episodes through cross-attention. We evaluate GlyRAG on the OhioT1DM and AZT1D datasets for 5-, 30-, and 60-minute forecasting horizons. Compared with strong CGM-only baselines, GPT-4 GlyRAG significantly improves long-horizon root mean square error (RMSE) over PatchTST on both datasets. For example, RMSE decreases from 13.8 to 10.6 at 30 minutes and from 23.1 to 20.2 at 60 minutes on OhioT1DM. LLaMA 3.1 produces smaller but significant long-horizon gains, suggesting that the contextualization pipeline is not limited to GPT-4. Clinical error-grid analyses further show that approximately 85 percent of predictions fall within the clinically acceptable Clarke Error Grid Zones A and B. These results suggest that CGM-derived linguistic context and case-based retrieval can improve long-horizon glucose forecasting without requiring additional sensing modalities.

Traffic forecasting systems rely on fixed sensor networks that frequently exhibit contiguous blackouts. Such outages are usually treated as ignorable missingness, although dropout can depend on unobserved traffic conditions. We study this possibility with an MNAR-aware latent state-space model that combines linear traffic dynamics with a Bernoulli missingness channel whose probability depends on the latent state. Inference uses an Extended Kalman Filter (EKF) followed by Rauch-Tung-Striebel (RTS) smoothing, and parameters are learned by approximate EM. We evaluate Seattle using a leakage-free, month-balanced set of 300 unique all-horizon-aligned blackout windows. On this benchmark, MAR-LDS attains 4.264 mph pooled imputation RMSE and MNAR-LDS improves it to 4.177 (difference -0.086); the detector-cluster bootstrap 95% interval is [-0.182,-0.002]. A causal one-step predicted latent representation raises missingness ROC-AUC from 0.685 using observed-only features to 0.784. We further test whether this compact probabilistic model remains competitive with substantially larger neural time-series architectures under the identical masked-imputation protocol. MNAR-LDS ranks second in pooled RMSE and outperforms 8 of 9 evaluated neural architectures; it is within 1.22% of the best neural result, with no statistically resolved difference under detector-cluster bootstrap, while achieving lower P95 error, lower long-blackout RMSE, and orders of magnitude fewer stored scalar entries. MNAR roughly doubles end-to-end training time relative to MAR and increases EKF+RTS inference time by 41%, making the accuracy-complexity-cost tradeoff explicit. Controlled state-dependent blackouts further show larger gains when dropout is genuinely informative, including a 6.34% reduction in 30-minute forecast RMSE relative to MAR.

This study presents a controlled comparison of baseline Kolmogorov-Arnold Networks (KAN), implemented via PyKAN, and Long Short-Term Memory (LSTM) networks for the forecasting of stochastic, non-stationary financial time series. The two architectures are assessed in terms of predictive accuracy, computational efficiency, and interpretability, with accuracy measured by the Root Mean Square Error (RMSE) in normalised feature space. Under a direct multi-output forecasting protocol, LSTM attains clearly superior accuracy across all tested prediction horizons, consistent with its well-established effectiveness for sequential data modelling. Baseline KAN, although offering theoretical interpretability through the Kolmogorov-Arnold representation theorem, exhibits substantially higher error rates and limited practical applicability for time series forecasting in its standard form. Several specialised temporal variants -- including Temporal KAN and Time-Frequency KAN -- have since been proposed to address these sequential modelling limitations, but they lie outside the scope of the present study. KAN is observed to converge faster during training under the configurations tested, although direct runtime comparisons are constrained by methodological factors. These findings support the adoption of LSTM for accuracy-critical financial forecasting and establish an empirical baseline for standard KAN on stochastic sequential data, motivating further investigation of temporally-aware KAN architectures. The study benchmarks baseline KAN against baseline LSTM only; the results do not extend to specialised KAN variants designed for sequential data, nor to the broader family of temporal models.

Wi-Fi sensing is a leading technology for Human Activity Recognition (HAR), offering a non-intrusive and cost-effective solution for healthcare and smart environments. Despite its potential, existing methods struggle with domain shift issues, often failing to generalize to unseen environments due to overfitting. This paper proposes IBIS, a robust ensemble framework combining Inception-Bidirectional Long Short-Term Memory (BiLSTM) for feature extraction and Support Vector Machine (SVM) for classification of Doppler signatures. The proposed architecture specifically targets generalization capabilities. Experimental results on multiple datasets show that IBIS achieves 95.40% accuracy, delivering a 7.58% performance gain compared to standard architectures in cross-scenario evaluations on external datasets. The analysis confirms that IBIS effectively mitigates environmental dependency in Wi-Fi-based HAR.

Data augmentation is becoming increasingly important across various areas of time series analysis, including forecasting, classification, and anomaly detection. We introduce the Latent Generative Temporal Augmentation (L-GTA) model, a generative approach based on a Variational Autoencoder with a Bi-LSTM backbone and temporal self-attention. The model learns a latent representation for each timestep and applies controlled perturbations such as jittering, magnitude warping, or drift. We define an equivariance objective to further encourage consistency between latent space and data space transformations. As a result, the augmented samples show predictable and interpretable transformation signatures. We evaluate L-GTA on several real-world datasets against SOTA generative methods, including TimeGAN, TimeVAE, and Diffusion-TS, as well as direct transformation approaches. Across experiments on downstream forecasting, distribution fidelity, and controllability of transformation intensity, L-GTA consistently outperforms competing approaches. In downstream forecasting, it reduces prediction error by up to 26% compared to the strongest generative method and 27% relative to using the original data without augmentation.

Transfer Learning (TL) is an emerging field in modeling building thermal dynamics. This method reduces the data required for a data-driven model of a target building by leveraging knowledge from a source building. Consequently, it enables the creation of data-efficient models that can be used for advanced control and fault detection & diagnosis. A major limitation of the TL approach is its inconsistent performance across different sources. Although accurate source-building selection for a target is crucial, it remains a persistent challenge. We present GenTL, a general transfer learning model for single-family houses in Central Europe. GenTL can be efficiently fine-tuned to a large variety of target buildings. It is pretrained on a Long Short-Term Memory (LSTM) network with data from 450 different buildings. The general transfer learning model eliminates the need for source-building selection by serving as a universal source for fine-tuning. Comparative analysis with conventional single-source to single-target TL demonstrates the efficacy and reliability of the general pretraining approach. Testing GenTL on 144 target buildings for fine-tuning reveals an average prediction error (RMSE) reduction of 42.1 % compared to fine-tuning single-source models.

Skeleton-based action recognition (SAR) in videos is an important but challenging task in computer vision. The recent state-of-the-art (SOTA) models for SAR are primarily based on graph convolutional neural networks (GCNs), which are powerful in extracting the spatial information from skeleton data. However, their ability to capture temporal dynamics remains limited. To address this, we propose the G-Dev layer, which leverages path development-a principled and parsimonious representation for sequential data based on Lie group structures-to enhance temporal modeling. By integrating the G-Dev layer, the proposed DevLSTM module summarizes local temporal dynamics, reducing the time dimension while retaining high-frequency information. It can be conveniently applied to any temporal graph data, complementing existing advanced GCN-based models. Our empirical studies on the NTU-60, NTU-120 and Chalearn2013 datasets demonstrate that our proposed GCN-DevLSTM network consistently improves the strong GCN baseline models and achieves competitive performance. The code repository is publicly available at https://github.com/DeepIntoStreams/GCN-DevLSTM.