Impedance Control

Vision-language-action models tell a robot where to move, but not how hard to push. Contact-rich tasks depend on that second quantity, compliance, yet no widely used demonstration interface records it. The obstacle is identifiability as realized pose and measured force cannot separate the operator's intended equilibrium from their stiffness, so VR controllers, SpaceMouse and handheld grippers cannot supply compliance supervision even in principle. Prior compliance-output policies work around this with hand-specified task structure, privileged simulation contact state, or dedicated force and tactile hardware. Four-channel bilateral teleoperation removes the ambiguity directly by using the leader arm as a separate measurement of the intended equilibrium, making per-axis stiffness identifiable by regression using only the joint-torque sensing already on the manipulator. This yields per-timestep, direction-dependent compliance labels at zero annotation cost, which we use to fine-tune a VLA to emit stiffness alongside pose. On a Franka Research 3 wiping task, ours is the only policy of five whose contact force changes when the instruction asks for a firm wipe rather than a normal one (6.4N (normal) to 9.1N (firm) RMS, Cohen's d = 0.89, p = 0.023

CMDIR extends Manifold-Decomposed Impedance Retargeting (MDIR) to transform fixed-impedance demonstrations into continuous variable-impedance controllers, which can also serve as structured supervision for imitation learning. Continuous Task-Manifold Impedance Representation (TMIR) pairs an evolving task frame with controller instructions. Demo-relative Compromise dynamics retain moving-basis transport and control/physical metric mismatch, yielding displacement, reaction-impulse, and perturbation-sensitivity criteria. Quality-to-Fast automatically compiles a solver structure from development paths within a predefined finite space, re-instantiates that structure for each demonstration, and certifies the resulting candidate by multi-resolution evaluation. Across 225 retargeted-controller trials in three real contact tasks, full CMDIR improves mean task-proxy retention and reduces mean pose deviation, force fluctuation, and peak force relative to discrete MDIR. FastMPO achieves a $5.8$--$9.4\times$ speedup over C-MPO with comparable closed-loop outcomes. Downstream experiments demonstrate learnability of the complete TMIR supervision interface; lower force fluctuation and peak force are observed among successful executions, while completion reliability remains uneven across tasks and environments.

Passive mechanical interfaces offer a lightweight alternative to actuated manipulators for quadruped payload carrying, but their impedance directly couples the payload dynamics with the locomotion pattern. This paper analyzes how passive-arm stiffness-damping selection affects payload-carrying locomotion under different gait and payload conditions. We compare damped and underdamped passive-arm impedance configurations in simulation during flat-ground locomotion. For crawl gaits, where the support polygon remains well defined, the results show that underdamped impedance increases passive-joint oscillations and can reduce the ZMP margin with respect to the support polygon. Trot is retained as a dynamic excitation case for the passive arm, but it is not used for direct ZMP-margin stability comparison. The results are summarized in gait-payload-stiffness-damping maps, where ZMP-margin reduction is evaluated for crawl gaits and trot is retained only as a passive-arm excitation case.

Contact-rich manipulation requires precise tracking and mechanical compliance, where variable impedance control can improve robustness in task success, whereas static compliance cannot adapt to varying contact constraints. Variable impedance skills can be learned from demonstrations, avoiding complex modeling, but compliance is a hidden variable in force-agnostic kinematic data. While existing methods infer compliance from trajectory variations, these variations may reflect geometric adaptation and not intentional compliance when subject to changing spatial layouts. Therefore, this letter introduces Variable Impedance Diffusion Policy (VIDP), an imitation learning-based variable impedance control framework leveraging a Task-Parameterized Directionality-Aware Mixture Model (TP-DAMM) to extract physically consistent trajectory distributions from diverse demonstrations. By mapping distributions to stiffness profiles, VIDP jointly predicts pose actions and task compliance without force sensors. Real-world experiments show that VIDP significantly outperforms fixed-impedance baselines in task success rate while reducing interaction forces with respect to high stiffness controllers and tracking errors with respect to low stiffness baselines.

Multi-link aerial robots can actively deform their articulated structures during flight, giving them strong potential for aerial manipulation. However, they still face substantial challenges in contact-rich aerial manipulation tasks such as surface sliding, which requires both disturbance robustness and compliance to uncertain surface geometry. Force-control strategies such as impedance and admittance control are commonly employed to address these requirements. Although impedance control can provide disturbance-resistant interaction and admittance control can offer compliant adaptation, their opposite force--motion causalities prevent their simultaneous implementation when applied through the same actuation source, such as the rotor thrusts used by conventional aerial robots. To overcome this limitation, we propose a hybrid impedance--admittance control strategy for a multi-link aerial robot. The articulated morphology enables a functional separation of force and motion regulation across joint and rotor actuation sources. In this framework, admittance behavior is generated through joint angle regulation to enhance adaptive interaction, while impedance behavior is achieved by modulating rotor thrust to regulate the sliding motion. This structural coordination allows the robot to leverage the complementary strengths of both control paradigms. As a result, the multi-link aerial robot achieves resilient and adaptive surface sliding. Experimental results demonstrate robust and compliant sliding performance on unknown surfaces.

Fixed Cartesian impedance makes contact-rich teleoperation demonstrations practical, but gains that secure progress and contact support also determine impact and force variability. We study single-demonstration controller-to-controller impedance retargeting. Given one fixed Cartesian impedance command sequence {K0, D0, xcmd}, Manifold-Decomposed Impedance Retargeting (MDIR) deterministically reparameterizes the recorded controller into an executable task-channel variable-impedance command. MDIR targets this local retargeting problem by preserving projected task-channel responses near the demonstrated trajectory. It represents the source response in operational work, exertion, and support channels with a passive residual complement under a control-chain metric, computes an executable Cartesian-to-Manifold Retargeting (C2M) baseline, and applies Manifold-Constrained Parameter Optimization (MPO) to select a feasible representative with lower wrist-force peaks, impulse, force variability, and nominal controller power. Across planar wiping, pick-and-place, and pushing on a Franka Panda, the full MDIR controller passes Task Check in all 15 closed-loop executions and reduces all four aggressiveness metrics relative to the fixed-impedance demonstrations.

The paper proposes a robot-agnostic compliant-control framework that extends the ROS control ecosystem with standardized joint and Cartesian command interfaces. It addresses a key limitation of existing control software: no reusable infrastructure for implementing compliant-control algorithms across different manipulators while preserving a common interface to higher-level applications. A plugin-based architecture separates controller infrastructure from control-law implementation. Generic wrappers use existing hardware abstractions to interface with different manipulators, while runtime-loaded plugins implement only the control law. Command interfaces support joint- and Cartesian-space references, stiffness and damping gains, nullspace targets, and feedforward terms, enabling variable impedance and diverse compliant-control formulations. Robot kinematics and dynamics are computed from URDF models using Pinocchio. The architecture facilitates the development of compliant-control strategies and enables the same implementation to be deployed across platforms unchanged. The complete framework, including reference controllers, high-level task interfaces, and example configurations for various manipulators, is open-sourced. The reference Cartesian impedance controller supports task-dependent compliance by rotating translational and rotational stiffness and damping, allowing the principal compliance directions to be updated online according to local task geometry rather than remaining fixed in the robot base or TCP frame. This is particularly important in contact-rich manipulation, where the desired directions of motion, constraints, and compliance directions may vary throughout task execution. Real-robot experiments demonstrate task-dependent compliance in contact-rich manipulation, while simulations show portability across manipulators with distinct kinematic and dynamic characteristics.

Ship-borne manipulators operating in maritime environments are subject to stochastic wave-induced base motions that introduce kinematic disturbances and dynamic coupling, degrading trajectory tracking accuracy and complicating safe, contact-rich manipulation. This paper proposes a torque-level optimization-based control framework that integrates high-precision trajectory tracking with task-space impedance for ship-borne manipulators. The controller is formulated using task-space inverse dynamics (TSID) and solved via quadratic programming to explicitly compensate for the dynamic coupling introduced by base motion. To enable accurate feedforward compensation, an error-state Kalman filter (ESKF) is developed to estimate the base state by fusing inertial measurements with end-effector pose feedback. The framework is validated in simulation and real-world experiments using a 7-DOF manipulator mounted on a 6-DOF Stewart platform. The proposed method reduces real-world end-effector position tracking error by over 25.7% compared with the best baseline. Furthermore, the controller enables dynamic peg-in-hole insertion with 1~mm clearance under base motion, increasing the success rate while reducing average contact forces by 45%, demonstrating precise and compliant manipulation in contact-rich environments.

Learning-based manipulation policies usually predict robot actions from sensory observations and leave their execution to a separate low-level controller. In rigid contact, this separation can be problematic: the same motion to a virtual target or compliant motion command can lead to unstable contact, tracking error, excessive loading, or tool damage, depending on the low-level controller. In this paper, we propose a \textit{Unified Robot Control-Policy Framework} (URF), which connects compliant action prediction with unified impedance-admittance control. Given multimodal observations, URF predicts a virtual target, a stiffness matrix, and an impedance-admittance switch ratio. The switch ratio determines when the controller should behave more like admittance control for accurate motion tracking and when it should move toward impedance control for safer rigid contact. Because demonstration data do not provide ground-truth environment stiffness, we construct switch-ratio labels from measured contact forces and use them to supervise controller-mode prediction. Across box-flipping and line-pressing tasks, URF achieves higher task success rates while reducing failure modes observed with admittance-only execution, including rapid force buildup, large force oscillations, tool breakage, and robot safety stops. These results suggest that contact-aware policies benefit from predicting not only compliant actions but also the controller behavior used to execute them. Project page: https://jiyou384.github.io/urf_project_page/

This paper presents a method for user-driven robot Learning from Demonstration (LfD) that reduces user effort while ensuring compliant and precise reproduction. The method eliminates repeated teaching for the same task and enables real-time learning from a single demonstration. Demonstrated motions are reproduced with high precision, while impedance variations are learned in real time to provide both compliance and robustness against perturbations. This mitigates potential safety issues in Human-Robot Interaction (HRI) that arise from conventional time-indexed trajectories lacking compliance. The proposed approach integrates a three-dimensional (3D) Fast Diffeomorphic Matching (FDM) algorithm with a Dynamical System (DS)-based motion generator to achieve real-time single-shot demonstration learning and reproduction. An Extended Kalman Filter (EKF) framework compensates for reproduction errors and recovers from external interactions. Furthermore, an impedance parameterization function is incorporated to learn impedance variations from demonstrations and maintain surface contact for specific applications. The proposed approach is validated through comprehensive experiments on a 7 Degree-of-Freedom (DOF) KUKA LWR IV+ robot.

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com

Load transportation with quadruped robots is strongly affected by the dynamics of the physical interface between the robot and the load. Passive spring-based arms reduce weight and complexity compared to active manipulators, but their spring-damper dynamics can introduce oscillatory forces that degrade locomotion stability. This paper derives an extended Zero Moment Point (ZMP) formulation that includes passive payload-interface dynamics, relating stiffness, damping, and payload mass to the stability margin. The analysis shows that underdamped configurations can resonate with locomotion harmonics. Based on this insight, we augment a Single Rigid Body Dynamics model with passive subsystem dynamics and integrate it into a Model Predictive Control framework. In simulation, the proposed controller reduces stability violations by up to $10\times$, from $7.0\%$ to $0.7\%$, and increase locomotion efficiency by lowering horizontal ground reaction force effort by up to $15\%$ compared to a nominal baseline. Hardware experiments with a $2\,\mathrm{kg}$ payload show stable locomotion under pull-release disturbances where the nominal controller fails. The same model also enables end-effector tracking through passive arm dynamics without direct arm actuation.

The output combiner of a Doherty power amplifier (PA) integrates load modulation, impedance matching, and phase compensation within a single network, making its design and synthesis highly challenging. In this paper, we propose a three-port Doherty combiner design methodology that combines deep convolutional neural networks (CNNs), pixelated layout representations, and genetic algorithms (GA) with dual-state impedance synthesis to address both peak and back-off power conditions. As a proof of concept, two GaN HEMT Doherty PA prototypes incorporating three-port pixelated combiners are designed and fabricated. Both prototypes achieve a measured saturated output power exceeding 44.2 dBm with peak drain efficiency above 71.2% within 2.6-2.8 GHz. Furthermore, a drain efficiency as high as 64% is measured at the 6-dB back-off level. After applying digital predistortion, each prototype achieves an adjacent channel leakage ratio (ACLR) better than -51.3 dBc.

Safe rehabilitation is an interaction-dynamics problem: the controller must regulate a prescribed motion while absorbing involuntary spasm, voluntary effort, actuator compliance, and model mismatch as interaction disturbances. This paper instantiates the predictive interaction-dynamics framework of the base pHRI formulation on a series-elastic-actuated knee joint. SEA feedforward reduces the gravity-compensated knee to the same constant-coefficient scalar double integrator used in the base framework, while a dynamic-residual measurement from spring deflection supplies an interaction-disturbance observation. A steady-state target converts the estimated disturbance into a cancelling input, and a finite-horizon quadratic program regulates deviations from that target under range-of-motion, torque, and velocity constraints. The evaluation is stiffness- and damping-matched so improvements cannot be attributed to higher impedance. Under a motion-opposing $15\unit{Nm}$ step, classical impedance and MPC without estimation produce about $500\unit{mrad}$ steady-state error, whereas Kalman-augmented interaction MPC reduces this to $1.17\unit{mrad}$ at 100Hz and $0.70\unit{mrad}$ at 500Hz; the 500~Hz peak is $7.27\unit{mrad}$. In 30 randomized trials, the 95th-percentile peak is $21.57\unit{mrad}$. Bounded Assist-as-Needed scheduling, a corrective-channel energy tank, inequality-constrained OSQP stress cases, direct MuJoCo execution, and a posture-clamped MyoSuite knee-slice run are implemented. The results support the SEA-knee instantiation of the interaction-dynamics framework while separating it from clinical intent recognition, full-system passivity, safety certification, hardware trials, and free-standing multi-joint validation.

Real-world robotic manipulation tasks often involve forceful interactions with the environment, such as using tools of varying weights, transporting objects with different masses, and performing contact-rich tasks like table wiping. Previous learning-based approaches typically employ imitation learning policies that output target end-effector poses tracked by low-level impedance controllers. In these systems, forceful interactions are either implicitly realized through steady-state tracking errors or explicitly commanded using wrist force/torque or tactile sensors. However, implicit approaches generalize poorly across object weights, while explicit approaches require specialized hardware and increase system complexity. In this work, we propose IMPACT, a framework that decouples these forceful tasks into task-planning and internal-model-based predictive control. Extensive simulation and real-world experiments demonstrate that the proposed framework achieves higher success rates and improved generalization to unseen object weights, as well as better safety and energy efficiency.

Physical human-robot interaction requires yielding transiently to contact yet recovering the commanded reference under sustained load. Finite-stiffness impedance control retains a static deflection there, while predictive alternatives typically optimize a nonlinear robot or impedance model online. Operational-space cancellation instead exposes a translational error double integrator with a fixed transition matrix and a configuration-scheduled input map, making interaction a predictive quantity rather than a property re-derived per configuration. We build on it a compact offset-free interaction-error MPC for torque-controlled manipulators: a force-domain random-walk state estimates persistent interaction and model error, and a 30-variable convex QP maps the correction through the current task inertia while constraining the applied joint torque. Conditional results establish impedance equivalence of the unconstrained passive feedback, offset-free regulation at feasible frozen configurations, and quadratic stabilizability of the scheduled backbone. In a 1kHz MuJoCo simulation of a 7-DOF Franka FR3, the estimator cuts steady-state error under a repeated 15N step from 2.77mm to 0.042mm when added to the otherwise identical 100Hz MPC. A stiffness-and-damping-calibrated impedance baseline attains 2.59mm but briefly saturates and needs 3.3x the peak positive joint power. Adding ideal measured-force cancellation to that baseline gives 1.39mm, so constant-load rejection is not unique to MPC; the sensorless controller still reaches 0.042mm in the moving task, a 65x reduction without force sensing and without the baseline's saturation or power cost. Demonstrated in simulation under a shared actuator budget, the contribution is an efficient operational-space realization complementing rather than replacing broader interaction-control architectures.

Wearable exoskeletons can augment human phys ical capabilities during complex activities. However, ensuring adaptation across diverse tasks while guaranteeing interaction safety remains a critical challenge. To address this, a simulation trained variable impedance control approach with stability guarantees is proposed. First, a simulation-based human exoskeleton motion data generation pipeline is established, utilizing Proximal Policy Optimization (PPO) to synthesize human muscle activations while the exoskeleton provides direct compensation for human biological joint torques. Subsequently, the generated dataset is used to train a dual modality policy that fuses semantic instructions with proprioceptive history, enabling the prediction of reference trajectories and variable impedance gains for nine different motion tasks. To guarantee safety, the network outputs are constrained by a stability criterion derived from Lyapunov stability theory, which bounds stiffness variations to ensure the asymptotic stability of the coupled system. Experimental results indicate that the proposed framework reduces metabolic cost in real-world scenarios com pared with standard baseline methods. These findings suggest the feasibility of the proposed framework for safe, multitask exoskeleton control.

Dominant programming paradigms inherit an execution model optimised for a bygone era of a single human mind instructing a local machine, leaving contemporary systems burdened with historical path dependencies. When forced to host multi-dimensional, connectionist intelligence, this brittle assembly model fractures under the weight of a profound probabilistic-symbolic impedance mismatch. While contemporary Software 3.x frameworks attempt to patch the mismatch by encasing large language models (LLMs) in increasingly complicated external harnesses, this spiralling architectural complexity only compounds the carrying cost of static code assembly. To address the cause rather than the effects, this paper introduces Software 4.0 -- an autopoietic heterarchy of human intelligence, neural AI, and natively reflective symbolic substrate. Under this paradigm, software is transformed from an inert corpus to be parsed into a self-regulating metabolic network that natively verifies, modifies, and evolves its own structural integrity. We present Recognitive, the programming language and platform that materialises this architecture. By offloading the burden of structural verification to a deterministic substrate, it unlocks a superior inference-time scaling regime -- one where connectionist compute translates entirely into deep semantic exploration and hypothesis traversal rather than the ruinous computational and financial cost of simulating structural constraints probabilistically. Moving beyond the legacy 'Software Factory' mindset, we outline the theoretical foundations required to ground connectionist intent and arrive fully in the intelligence age. This is a foundational vision paper; empirical evaluation and formal specification of the type system and operational semantics are the subject of future work.

Safe physical interaction is critical for deploying robotic manipulators in human-robot interaction and contact-rich tasks, where uncertainty, external forces, and actuator limitations can compromise both performance and safety. We propose an online adaptive impedance control framework that enforces joint-state safety while achieving compliant interaction under uncertain dynamics. The approach combines a quadratic-program-based safety filter with a novel composed position-velocity non-smooth control barrier function (NCBF), enabling joint position and velocity constraints to be enforced through a unified relative-degree-one barrier. Unknown dynamics are compensated online using an interval type-2 fuzzy logic system, while actuator torque limits are handled through soft constraints with exact penalty recovery of feasible solutions. A disturbance-observer-enhanced safety mechanism improves robustness against modelling errors and external interaction forces. Using composite Lyapunov analysis, we prove forward invariance of the safe set and the uniform ultimately boundedness of the impedance-tracking error. Simulations on a 7-DOF manipulator with severe parametric uncertainty and external interaction wrenches demonstrate safe constraint satisfaction and robust impedance tracking.

In this paper, we address the challenge of performing non-prehensile pushing operations with a compliant robotic manipulation system. To ensure safe operations in human-populated environments, robots must comply with external physical interactions and exhibit passive behavior. To achieve this, we extend a state-of-the-art pushing model to integrate it with impedance-controlled robots. We develop a model predictive control framework built upon this model that enables compliant pushing through optimal modulation of the robot's position/velocity set-point, jointly realizing the required pushing force and contact point adaptation to obtain desired object motion. However, external interactions may induce tracking errors, causing a consequent potentially indefinite increase of the pushing force. To prevent this, we integrate an energy tank passivity filter that further modulates the robot velocity set-point to guarantee passivity and avoid uncontrolled energy buildup. The proposed method has been rigorously tested in simulation and validated through experiments on two different robotic systems, demonstrating passive compliance during human-robot interactions and assessing trajectory tracking performance and robustness to variations in the object's physical parameters.

Robot systems for teleoperation commonly use a spring-like force pulling the follower robot towards the leader's position to track their movements. With this control strategy, the tracking accuracy deteriorates when the follower' stiffness is low, but high stiffness poses a danger to objects or people in the follower robot's environment. To address this trade-off between tracking accuracy and safety, we propose an alternative intention assimilation control (IAC) strategy where the robot's tracking accuracy can be ensured without high stiffness. Different from traditional approaches, which transmit the leader's current position to the follower, this new controller estimates the leader's target position and transmits it to the follower. With this strategy, the follower impedance can be changed on-the-fly to continuously reflect the user's desired impedance or modulated automatically to fulfill the task requirements. Our controller was validated on two 7 degree-of-freedom manipulators, yielding high tracking accuracy with varying impedance. Four experiments were conducted to compare {teleoperation} with IAC to tele-impedance control (TIC) during free tracking, interaction with a balloon, during peg insertion, and table polishing with force feedback. The results show that IAC increases tracking accuracy, improves task completion rate and reduces completion time. IAC enables the robot to accurately replicate the user's movement while giving them freedom to modulate the impedance according to their intention, providing an unprecedented level of control of the follower's position and its impedance during unilateral and bilateral teleoperation.

Variable impedance model predictive control (MPC) formulations often treat joint stiffness as an instantaneous decision variable. The resulting feasible set strictly contains the physically realizable set under first-order actuator dynamics. We identify this as a formulation error rather than a modeling approximation, formalize the distinction between the parameter-based feasible set F_param and the realizable set F_real, and characterize the regime of mismatch via the dimensionless parameter α = ωsT (actuator bandwidth times task timescale). For the 1D hopping monoped, we prove that below an analytical threshold α_crit derived in closed form from task physics, no admissible stiffness command realizes the parameter-based prediction. Numerical validation in 1D shows monotonic deviation growth as α decreases, with the predicted scaling holding across ten parameter combinations (log-log R2 = 0.986). Mechanism transfer to planar spring-loaded inverted pendulum dynamics confirms center-of-mass and stance-timing deviation as the primary consequence, with regime-dependent friction effects as a tertiary observable. A second threshold α_infeas < α_crit establishes a floor below which restricting the admissible stiffness range cannot repair realizability, closing the conservative-tuning objection. Augmenting the prediction state with stiffness closes the mismatch by construction.

Shared Control methods often use impedance control to track target poses in a robotic manipulator. The guidance behavior of such controllers is shaped by the used stiffness gains, which can be varying over time to achieve an adaptive guiding. When multiple target poses are tracked at the same time with varying importance, the corresponding output wrenches have to be arbitrated with weightings changing over time. In this work, we study the stabilization of both variable stiffness in impedance control as well as the arbitration of different controllers through a scaled addition of their output wrenches, reformulating both into a holistic framework. We identify passivity violations in the closed loop system and provide methods to passivate the system. The resulting approach can be used to stabilize standard impedance controllers, allowing for the development of novel and flexible shared control methods. We do not constrain the design of stiffness matrices or arbitration factors; both can be matrix-valued including off-diagonal elements and change arbitrarily over time. The proposed methods are furthermore validated in simulation as well as in real robot experiments on different systems, proving their effectiveness and showcasing different behaviors which can be utilized depending on the requirements of the shared control approach.

Modern artificial intelligence remains fundamentally divided between the continuous, probabilistic spaces of Foundation Models and the discrete, deterministic structures of Knowledge Graphs. While Retrieval-Augmented Generation (RAG) attempts to connect them by serializing graph data into text, we argue this lexical bridging is merely a superficial patch. In this paper, we formalize the underlying structural and geometric friction as the \textit{Impedance Mismatch}. By categorizing current neuro-symbolic integration strategies into a three-tiered hierarchy, we demonstrate that neither surface-level prompt injection nor continuous representation alignment can preserve the strict logical motifs required for reliable multi-hop reasoning. We define the specific mathematical limits, such as the Lexical Bottleneck and Topological Collapse, that show current architectures will eventually hallucinate or conflate semantic nodes. To achieve true semantic fusion, we propose a rigorous theoretical roadmap. We advocate for natively internalizing discrete symbolic structures through Structured Residual Streams, utilizing Vector Symbolic Architectures for latent sub-graph injection, and performing model updates via Orthogonal Subspace Editing. This actionable framework paves the way for models that seamlessly fuse the precision of symbolic logic with the expressivity of parametric memory.

Bimanual mobile manipulation requires a seamless integration between high-level semantic reasoning and safe, compliant physical interaction - a challenge that end-to-end models approach opaquely and classical controllers lack the context to address. This paper presents GenerativeMPC, a hierarchical cyber-physical framework that explicitly bridges semantic scene understanding with physical control parameters for bimanual mobile manipulators. The system utilizes a Vision-Language Model with Retrieval-Augmented Generation (VLM-RAG) to translate visual and linguistic context into grounded control constraints, specifically outputting dynamic velocity limits and safety margins for a Whole-Body Model Predictive Controller (MPC). Simultaneously, the VLM-RAG module modulates virtual stiffness and damping gains for a unified impedance-admittance controller, enabling context-aware compliance during human-robot interaction. Our framework leverages an experience-driven vector database to ensure consistent parameter grounding without retraining. Experimental results in MuJoCo, IsaacSim, and on a physical bimanual platform confirm a 60% speed reduction near humans and safe, socially-aware navigation and manipulation through semantic-to-physical parameter grounding. This work advances the field of human-centric cybernetics by grounding large-scale cognitive models into predictable, high-frequency physical control loops.

Teleoperation for contact-rich manipulation remains challenging, especially when using low-cost, motion-only interfaces that provide no haptic feedback. Virtual reality controllers enable intuitive motion control but do not allow operators to directly perceive or regulate contact forces, limiting task performance. To address this, we propose an augmented reality (AR) visualization of the impedance controller's target pose and its displacement from each robot end effector. This visualization conveys the forces generated by the controller, providing operators with intuitive, real-time feedback without expensive haptic hardware. We evaluate the design in a dual-arm manipulation study with 17 participants who repeatedly reposition a box with and without the AR visualization. Results show that AR visualization reduces completion time by 24% for force-critical lifting tasks, with no significant effect on sliding tasks where precise force control is less critical. These findings indicate that making the impedance target visible through AR is a viable approach to improve human-robot interaction for contact-rich teleoperation.

Quadruped mammals coordinate sagittal spinal bending with axial extension and compression during dynamic locomotion. Yet most robotic quadrupeds use rigid trunks, passively compliant spines with fixed properties, or actively controlled spines that track prescribed trajectories. Whether actively regulated spinal compliance can support faster dynamic locomotion remains unclear. We present SPARC, a compact 1.26-kg, 3-DoF sagittal-plane spine that combines revolute and prismatic motion with independently tunable task-space stiffness and damping. A floating-base impedance controller renders the desired task-space compliance, and benchtop tests show that the fitted axial stiffness matches commanded values within 1.5%. We integrate SPARC into an 8-DoF quadruped and evaluate it across 97 bounding trials under three spine configurations: impedance-controlled SPARC, the same SPARC module held near a fixed pose using position control, and a lightweight rigid spine. Impedance-controlled SPARC reaches 1.029 m/s, compared with 0.769 m/s for position-controlled SPARC and 0.673 m/s for the rigid spine. Impedance-controlled SPARC reaches higher speeds with larger axial motion and greater mechanical power exchange, while at matched speed it has a higher electrical cost of transport than the rigid spine, revealing an energetic trade-off. Code and hardware are available at: https://github.com/YueWang996/sparc

This paper presents a novel approach to real-time safety monitoring in human-robot collaborative manufacturing environments through a wrist-mounted Inertial Measurement Unit (IMU) system integrated with a Predictive Safety Model (PSM). The proposed system extends previous PSM implementations through the adaptation of a spring-damper-mass model specifically optimized for wrist motions, employing probabilistic safety assessment through impedance-based computations. We analyze our proposed impedance-based safety approach with frequency domain methods, establishing quantitative safety thresholds through comprehensive comparative analysis. Experimental validation across three manufacturing tasks - tool manipulation, visual inspection, and pick-and-place operations. Results show robust performance across diverse manufacturing scenarios while maintaining computational efficiency through optimized parameter selection. This work establishes a foundation for future developments in adaptive risk assessment in real-time for human-robot collaborative manufacturing environments.