Manipulation

Non-prehensile object manipulation skills are important for real-world robot interactions, enabling highly dynamic tasks such as balancing a glass on a tray or the controlled sliding of items on a table. Among such tasks, those characterised by high-speed manipulation requirements and general sensitivity of the resulting hybrid dynamics are particularly hard to accomplish. Within these, juggling can be seen as a highly challenging maneuver to be solved. The key to robotic juggling is achieving dynamic stabilisation of an underactuated object. Since the object does not possess the ability of self-correction, its stability is entirely dependent on the forces applied to it. This creates a system that is sensitive to control inputs, where timing is critical to continuously counteract deviations and maintain the desired behavior. We develop a systematic method to control a 7-degree-of-freedom manipulator performing non-prehensile ball juggling with a tool. Our primary contribution is a model-based framework for generating juggling trajectories and stabilizing a periodic juggling motion for this hybrid system. The framework incorporates a two-stage optimal control approach to compute the underlying feasible motion patterns required for stable juggling. Offline-computed trajectories are then organised to enable real-time error correction without solving optimal control problems online. We demonstrate the effectiveness of the resulting controller by first evaluating its performance in a simulation environment and performing an experiment using a Franka Emika Panda robot.

Human video datasets used for cotraining robot manipulation policies largely consist of curated demonstrations where motions are orchestrated to resemble robot behavior and 3D hand poses are captured with specialized hardware. A more plentiful source of data is everyday Internet video, but it is an open question what factors enable transfer from such videos to robots. We investigate this using a new dataset of 532 human videos with 28 hours of high-quality triangulated hand labels and natural motions. We find that hand pose quality affects transfer, but even with accurate hands, the inherent motion gap hinders transfer unless the vision and policy networks specialize to each embodiment. Our cotraining recipe yields consistent improvements, with an absolute success rate gain of $29.7\%$ in the low-robot-data regime across six manipulation tasks.

Robot manipulation of physical puzzles is important for automatic assembly and disassembly tasks. However, to enable robots to solve physical puzzles, manipulation skills need to be learned, which requires large training datasets, the generation of which is often time consuming and tedious. To overcome this problem, we propose the Physical Robot Manipulation Puzzle Generation framework (PhyRoGen), which leverages procedural content generation (PCG) for automated generation of synthetic datasets of manipulation puzzles. PhyRoGen is a general-purpose puzzle generator, which can generate physical puzzles with interlocking object dependencies, where one articulated object must be manipulated before another can be moved. Based upon PhyRoGen, we define six concrete generators which we use to generate 24 physical puzzles. By using a benchmarking framework, we are able to solve all puzzles in 1 to 300 seconds using sampling-based planning algorithms. Finally, we demonstrate that every generated puzzle is manipulatable by using a KUKA LBR iiwa robot in a physical simulation. This shows that our framework is able to procedurally generate unique, solvable robot manipulation puzzles, which is a crucial ingredient to benchmark manipulation algorithms and to develop robust foundation models.

GUI agents - vision-based models that control desktops, web browsers, and mobile devices through graphical user interfaces - promise to automate a wide range of digital tasks. While million-scale datasets have enabled substantial progress on click-grounding, drag grounding (e.g. drag-and-drop, swipe, highlight) data remains an order of magnitude smaller and current models fall short on complex drag-based interactions. We introduce DragOn, a drag grounding benchmark and training dataset covering four domains: text highlighting, cell selection, element resizing and slider manipulation. The dataset comprises 286K training screenshots and 3.5M training tasks, plus a 2000-example held-out evaluation suite. We evaluate proprietary (GPT, Claude) and open-weight (Qwen, Kimi, Holo) models, as well as a Qwen VLM fine-tuned on our training data. Results suggest that our dataset could improve performance of state-of-the-art models on downstream computer-use tasks.

Factual sycophancy occurs when a language model abandons a correct, verifiable answer under social pressure. Because a flip occurs only when pressure toward a false answer exceeds the model's neutral preference for the truth, flip rates conflate two mechanisms: the strength of that baseline preference (truth margin), and how far pressure shifts it (manipulation sensitivity). We decompose factual sycophancy into these channels and use them to separate the effects of size and instruction tuning across 56 open-weight models spanning 0.3B-32B parameters and 13 manipulation types. We find that vulnerability is governed mainly by size, but instruction tuning changes how size acts: small instruction-tuned models can become less robust, whereas large instruction-tuned models usually become more robust. Instruction tuning primarily increases truth margin, but its behavioral effect depends on manipulation type. Scaling also changes the two channels differently: base models gain margin but become mildly more manipulation-sensitive, whereas instruction-tuned models gain margin faster and become less sensitive. Factual sycophancy is therefore not a single scalar property. Evaluations should report channel-specific, manipulation-specific, and size-conditioned robustness rather than flip rates alone.

Robotic manipulation of textiles remains challenging because continuous deformation and self-occlusions hinder the robust visual perception required to estimate the cloth's state. To address the lack of annotated real-world data, we developed a Blender-based synthetic pipeline exporting auto-annotated keypoints, and combined manually labeled renders with real-world data to train a wrinkle detector. We present a perception framework integrating a CNN for permutation-invariant keypoint detection and a YOLOv8-OpenCV pipeline to extract grasping points from structural wrinkles. A proposed bimanual algorithm uses this system to stretch fully folded garments via wrinkles, transitioning to keypoint-based ironing once corners emerge. The keypoint model achieves a Mean Position Error (MPE) of 1.7615 pixels. The perception system transfers to physical fabrics without fine-tuning, outperforming baselines that fail in high-occlusion states or yield false positives on severe folds.

Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose a novel architecture using modality-specific convolutional stems and transformer-based fusion that effectively fuses information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multi-sensor representation then conditions a flow-matching policy for solving downstream tasks. Experimental results across five contact-rich manipulation tasks demonstrate the effectiveness of multi-resolution tactile features in imitation learning. MiTaS achieves an average success rate of 80 %, while vision-only (31 %) and visual-tactile (54 %) baselines cannot solve the task reliably. Co-training a visuo-tactile model with multi-tactile data boosts performance by over 10 % in certain tasks, without having access to the Evetac sensor during policy evaluation. A detailed sensor-reading and attention analysis reveals the importance of different sensors throughout task execution, validating our multi-resolution tactile sensing approach. Project Page: http://mitas-touch.github.io.

A policy tuned for one robot often behaves differently on another, whether due to the sim-to-real gap, unknown payloads, or the differing dynamics of two instances of the same robot. In contact-rich, dynamic manipulation, even small motion discrepancies can result in failure to track reference motion, since they disrupt the timing and modes of contact. Common remedies, such as domain randomization or system identification, either produce overly conservative task policies or require data that must be recollected for each robot or payload. We introduce the Torque Adaptation Module (TAM), a learned module that adapts the torque commands sent to the robot to match the behavior of an ideal robot. TAM operates between the low-level controller that tracks the policy's actions and the robot's torque interface. It includes a history encoder that embeds proprioceptive history into a latent state and a torque adaptor that computes residual torque corrections. Because TAM depends only on proprioceptive history and not on policy observations, or the action space, the same TAM weights can be reused to adapt policies with different action spaces (joint targets, end-effector targets, or direct torques). The policies themselves do not need to be trained with domain randomization of robot parameters. Instead, we offload the need for domain randomization to TAM by training it entirely in randomized simulation, using multi-robot pretraining followed by a robot-specific fine-tuning step that still requires no real-robot data. We evaluate TAM zero-shot on a real Franka Panda robot across dynamic manipulation tasks that include a vision-based box pushing policy (from RL), a flip policy (from BC), and an MPC ball-on-plate balancing. Our experiments show that TAM improves zero-shot real-robot execution compared to online system identification and RMA baselines and enables robust dynamic manipulation performance.

Vision-Language-Action (VLA) models leverage the rich world knowledge of pretrained vision-language models (VLMs) to enable instruction-following robotic manipulation. However, the structural mismatch between VLM semantic spaces and embodied control policies often hinders the learning of precise perception--action mappings. To address this challenge, we propose \textbf{AffordanceVLA}, a unified framework that introduces structured affordance forecasting as a task-oriented intermediate representation to establish a more precise and robust perception--action mapping. Specifically, we progressively model manipulation priors through three complementary components: 1) \textbf{Which2Act} for object-centric grounding via visual latent prediction to suppress distractions; 2) \textbf{Where2Act} for 2D interaction localization via affordance map estimation; and 3) \textbf{How2Act} for 3D geometric reasoning to guide manipulation policies. These affordance cues provide spatially grounded, semantically conditioned, and action-coupled intermediate representations, thereby naturally bridging vision, language and action. We integrate these modules into a Mixture-of-Transformer (MoT) architecture with specialized experts and train the model using a three-stage training strategy with a progressive data curriculum. To overcome the scarcity of dense affordance labels in robotic datasets, we also develop a robust automated data augmentation pipeline. Extensive experiments on simulation and real-world demonstrate that AffordanceVLA achieves strong performance across diverse manipulation scenarios.

Whether Large Language Models (LLMs) exhibit covert psychological manipulation in complex human-AI interactions has garnered increasing safety concerns. However, existing AI safety benchmarks remain largely restricted to explicit rule compliance and static prompts, failing to capture the dynamic and covert nature of manipulative strategies in multi-turn dialogues. We introduce CogManip, a comprehensive benchmark that evaluates 15 manipulation strategy risks across 1,000 multi-turn interaction scenarios, validated by human experts. A systematic evaluation of 13 representative models, including frontier models like GPT-5.4 and DeepSeek-V3.2, reveals significant risk heterogeneities and illuminates the targeted direction for future defense. Further analysis of objective function perturbation reveals that DeepSeek-V3.2's manipulation tactics are highly sensitive to both negative and benign system prompts, demonstrating the critical necessity of prompt-based defense engineering and implicit goal auditing. CogManip offers a robust instrument and perspective for auditing the implicit psychological influence and dynamic strategy selection of modern LLMs.

This paper presents a distributed conversational framework for human-robot collaborative manipulation that integrates local language and vision-language models (VLMs) with a Robot Operating System 2 (ROS 2)-based execution stack. Language understanding, visual grounding, orchestration, and motion execution run as separate ROS 2 nodes, enabling flexible deployment across distributed hardware while maintaining a responsive control loop. From free-form user commands, the system generates structured action requests for pick, place, and handover. It uses a VLM to return image-space targets, which are converted into metric robot-frame goals using depth and calibration. A web dashboard exposes intermediate intent and grounding overlays (pixel, depth, and robot-frame) and requires explicit operator confirmation before any motion is executed. Experiments on a Franka FR3 platform evaluate end-to-end task reliability and latency under increasing working table scene ambiguity and compare alternative LLM/VLM configurations in the same pipeline. Code and full documentation are available at github.com/cogrob-tuni/franka-llm.

Intra-vehicular robots in spacecraft help reduce astronaut workload and improve mission efficiency. Recent research focuses on using deep learning methods to achieve the acute control required for operations in these complex environments. However, objects exhibit unpredictable, unconstrained drift without gravitational damping. These factors demand robustness against complex multimodal action distributions. Diffusion policies (DP) can model these complex actions, but their iterative sampling process consumes too much energy for the limited power budgets of spacecraft. We therefore propose a low-energy intra-vehicular robotic manipulation framework, L-SDPPO, in which the Spiking Diffusion Policy (SDP) is optimized with a reinforcement learning (RL) algorithm. Furthermore, to address the insufficient perception of dynamic spatiotemporal features in microgravity, we propose the statedependent latency injection (SDLI) mechanism, which mimics biological neural delays to dynamically regulate the timing of input information. Evaluation on five representative intra-vehicular daily tasks (e.g., hatch opening and precision container capping) shows that our method consistently achieves higher success rates and lower energy consumption, compared to the state-of-the-art robotic manipulation methods. These results demonstrate our method is a viable intra-vehicular robotic manipulation method.

In humanoid motion control, model predictive control (MPC) offers physically grounded prediction and constraint handling, while reinforcement learning (RL) enables robust whole-body skills through large-scale simulation. However, using MPC inside RL often requires time-consuming problem construction or excessive training overhead, making such frameworks difficult to justify in practice. This work studies efficient training-time MPC guidance for humanoid locomotion and manipulation, termed MPC-RL. We introduce a centroidal-dynamics MPC reward formulation that leverages guidance from MPC trajectories in training time. To make this practical in massively parallel RL, we develop $π^n$MPC, a parallel-in-horizon and construction-free batched GPU MPC solver that operates directly on time-varying dynamics to avoid high memory usage and pre-compilation. Through a variety of comparative studies and hardware validations, we have found that MPC-RL achieves superior performance in locomotion and manipulation skills. The code base is available at https://github.com/junhengl/mpc-rl.

Embodied AI systems are increasingly expected to reason and act over extended horizons in physical environments. This growing capability brings safety to the foreground, because failures in the physical world can harm people, damage objects, and disrupt workplaces. Although safe embodied AI has attracted substantial attention, the literature remains fragmented across planning, policy design, and runtime execution. Long-horizon robotic manipulation is a particularly revealing anchor domain for this problem because semantic misgrounding, subtask-level error propagation, execution drift, and contact-rich physical risk can accumulate within the same closed-loop system. This survey therefore provides a structured review of safety in long-horizon robotic manipulation from an embodied AI perspective. We organize the literature by intervention locus, covering planning-time, policy-time, and execution-time safety, and we analyze the strength of the evidence that each line of work provides, distinguishing formal guarantees, statistical support, and empirical safety heuristics. This framework clarifies the distinct roles of backbone capability papers, direct safety mechanisms, and benchmark or evaluation studies, while exposing where current safety claims are well supported and where they remain indirect. We identify persistent gaps, including limited evidence for policy-time safety, weak formal support for contact-rich long-horizon manipulation, immature uncertainty-triggered intervention, and a shortage of manipulation-specific safety benchmarks. We conclude by outlining research directions for cross-layer assurance, evaluation design, and safer deployment of long-horizon robotic agents in real-world settings.

LLM-as-judge evaluation is widely used in benchmarking pipelines, where model outputs are compared and ranked using automated evaluators. These pipelines typically assume that judgments are stable properties of fixed inputs. We show that this assumption does not hold under interaction. We study post-decision manipulability: the extent to which an evaluation outcome can be altered through subsequent conversation with the judge after an initial decision has been made. Across controlled experiments on MT-Bench and AlpacaEval, we find that LLM judges are highly stable under repeated and neutral reevaluation, yet become substantially reversible under targeted post-decision challenge. An anti-baseline challenge protocol shows that stable judgments can be overturned through motivated interaction, while a counterbalanced target-validation protocol separates this reversibility from net target-directed steering. These reversals have practical consequences: they can degrade agreement with human preferences, shift benchmark rankings, and produce harmful evaluation changes despite high self-reported confidence. Authority framing is especially destabilizing, and revised judgments are often accompanied by low-overlap justifications, suggesting post hoc rationalization rather than reliable error correction. We introduce the Evaluation Robustness Score (ERS) to quantify interactional robustness by combining reversal susceptibility with counterbalanced directional effects. Our findings identify post-decision interaction as a distinct failure mode for LLM-as-judge evaluation and motivate evaluation protocols that measure not only static agreement, but robustness under challenge.

Video generation models have made impressive strides in synthesizing visually compelling content, yet their outputs remain confined to the virtual domain. A natural question follows: how well do these models reflect the physical world when their generated videos leave the screen and enter reality? We propose robotic manipulation as a concrete, measurable window onto this question: if a model has truly internalized physical laws, the motion it depicts should translate into executable robot behavior. We introduce Dream$.$exe, an evaluation framework that operationalizes this criterion through a video-to-execution pipeline. Given a scene image and a task description, Dream$.$exe synthesizes a manipulation video, converts the generated motion into robot trajectories, and executes them in a physics simulator, yielding a grounding signal that purely visual metrics cannot offer. Using this pipeline, we evaluate 8 models spanning frontier closed-source generators, open-source generators, and robot-specific models. Our benchmark covers 101 manually curated manipulation tasks at three levels of physical complexity, measured across visual quality, trajectory fidelity, and execution success. Encouragingly, several models achieve measurable execution success, suggesting that generative priors learned from internet-scale data already encode meaningful physical knowledge. Yet visual quality proves a poor predictor of executability, exposing a dimension of model capability that standard visual evaluations do not capture. Dream$.$exe will be open-sourced at https://github.com/showlab/Dream.exe.

A robotics benchmark score measures success under one fixed evaluation setup, yet is routinely treated as evidence of general manipulation capability. We identify four failure modes, each of which weakens or invalidates a benchmark's role as a valid proxy for that capability: shortcut solvability, lack of statistical significance, creeping overfitting, and data-source dependence. We propose one diagnostic per failure mode. We audit LIBERO, CALVIN, SimplerEnv, RoboCasa, and RoboTwin 2.0 under these diagnostics. LIBERO and CALVIN fail multiple diagnostics. RoboCasa and RoboTwin 2.0 fail fewer, despite appearing far less often in recent progress claims. On LIBERO, a 0.09B probe with no language encoder scores at or near reported SOTA, and most reported gains are not provably statistically significant. On CALVIN, randomizing block poses within the training range drops performance for every tested policy. We release the four diagnostics with reference implementations for authors and reviewers to apply before treating a benchmark score as evidence of progress. Code and artifacts are available at https://ripl.github.io/manipulation_benchmark_audit/.

Task-conditioned manipulation requires grounding instructions to task-relevant functional parts rather than object categories. This setting is scene-dependent and often one-to-many in cluttered scenes: the same object may afford different interactions across tasks, while a single task may correspond to either one functional region or multiple valid functional regions, depending on the scene layout. Existing affordance datasets and benchmarks remain misaligned with this setting, as they typically focus on grasping or object-level affordances, rely on synthetic scenes, or assume a single instruction-region correspondence. We present Affordance2Action (A2A), a benchmark-centered learning framework for scene-level, task-conditioned part affordance grounding. At its core is A2A-Bench, a manipulation-oriented benchmark that covers both single-region and multi-region instruction correspondences in everyday scenes, with the latter highlighting the ambiguity and diversity of affordance grounding in realistic multi-object environments. To construct it at scale, we build A2A-AffordGen, an agent-assisted annotation pipeline that combines language-model filtering, interactive part segmentation, instance-level mask-out refinement, task-reasoning instruction generation, and human verification. A2A-Bench's supervision further supports diverse downstream applications, with real-time affordance grounding and affordance-conditioned manipulation policies as two representative examples. Experiments show that A2A exposes substantial gaps in generic segmentation, VLM-based grounding, and affordance distillation baselines, while improving task-level localization and providing useful spatial priors for downstream manipulation. All datasets and code will be publicly released to promote open research.

Video-Action Models (VAMs) leverage the broad visual dynamics captured by pre-trained video diffusion models, offering a promising path toward generalizable robot manipulation. However, RGB-only video rollouts are not directly actionable: they leave metric 3D motion, contact geometry, and fine-grained spatial constraints under-specified, making action grounding ambiguous. Meanwhile, scaling action supervision across diverse tasks and embodiments remains costly. We present PointAction, a framework that bridges video predictions to robot actions through explicit point-based 4D modeling. PointAction fine-tunes a foundation video generation model to jointly predict future RGB frames and dynamic 3D pointmaps, producing temporally consistent 3D motion of task-relevant scene geometry. These point dynamics serve as a structured, embodiment-agnostic action interface, which a diffusion-based action decoder maps to executable robot actions. By using metric 3D point dynamics as the interface between video prediction and control, PointAction reduces the ambiguity of RGB-only action grounding and supports transfer across tasks and embodiments with limited action supervision. Experiments show that PointAction achieves state-of-the-art 4D generation quality on robot scenes, outperforms existing baselines in simulation, and generalizes to two real robot arms unseen during pretraining.

Action chunking has become a common inference strategy for flow-based robot policies, improving action coherence by modeling multi-step temporal dependencies in demonstrations. However, the execution horizon is still typically set as an empirical fixed value, overlooking that predictable free-space motions and precision-critical interaction phases often require different replanning frequencies. In this work, we first show that the denoising process of flow-based policies contains an intrinsic signal of task phases: clean-action estimates remain stable during predictable motion phases, but fluctuate more strongly around contact-rich or precision-sensitive operations. Motivated by this observation, we propose DVAC (Denoising-Variance Adaptive Chunking), a test-time method that adaptively determines how many actions to execute from each predicted chunk. DVAC measures the variance of clean-action estimates over the final denoising steps, executes the stable low-variance prefix, and replans before high-variance future actions are committed. To transfer across tasks and rollouts, DVAC further calibrates the threshold with a rolling estimate of the local variance scale. Experiments on LIBERO, RoboTwin, CALVIN, and real-world manipulation show that DVAC improves task success while reducing replanning frequency. With a $π_{0.5}$-based policy, DVAC improves LIBERO success from 94.75% to 98.00% and reduces replanning by 43.0%, while also yielding aggregate gains on RoboTwin and CALVIN and improving real-world execution efficiency.

Embodied chain-of-thought (CoT) aims to bridge linguistic reasoning and robotic control, but its effective form and integration strategy remain underexplored. In this paper, we revisit embodied CoT for vision-language-action (VLA) models at large scale. We construct the largest embodied CoT corpus to date, comprising 978,743 trajectories, 226.3M samples, and 2592.5 hours of robot data. Through extensive experiments, we find that effective embodied CoT should ground high-level semantic understanding into concrete action guidance, such as end-effector movement descriptions and image-space trajectories, while high-level reasoning alone brings only marginal gains. We further show that explicit CoT does not scale reliably when used as an autoregressive action prefix, as it suffers from compounding inference errors and unstable reasoning-action coupling. To address these limitations, we propose ERVLA, a VLA model that uses embodied CoT as representation-shaping supervision rather than mandatory test-time reasoning. ERVLA is trained with a reasoning-dropout strategy, enabling the model to absorb rich reasoning traces during training while predicting actions directly without CoT decoding during inference. This design improves scalability with increasing pre-training data and avoids autoregressive instability. ERVLA achieves state-of-the-art performance on LIBERO-Plus with an 86.9% success rate and reaches 53.2% success rate on VLABench, demonstrating strong out-of-distribution generalization. In real-robot experiments, ERVLA further outperforms competitive state-of-the-art baselines, especially on tasks requiring semantic disambiguation and long-horizon execution.

In robotic manipulation, the tight coupling between grasping and motion planning often obscures the true source of failure, leading to inefficient trial-and-error. To enable efficient long-horizon manipulation, we propose GTP-FA (Grasp-Then-Plan with Failure Attribution), a task-oriented two-stage grasp-then-plan framework that generates grasp candidates and performs downstream motion planning conditioned on the selected grasp. Given a failed manipulation trajectory, we learn a failure attribution model that generalizes to unseen grasps and produces a stable distribution over failure modes for diagnosis-guided optimization. Based on these attribution results, we then optimize both modules in a diagnosis-driven manner: on the grasping side, we inject task-level priors and risk penalties into grasp candidate scoring and optimization to suppress unstable or task-incompatible grasps; on the planning side, we target high-risk initial states through data collection and fine-tuning to address genuine planning bottlenecks. We evaluate the proposed framework in both simulation and real-robot experiments, and show that GTP-FA improves the corresponding base learners across RL, IL, diffusion-policy, and VLA-based settings, achieving substantially higher overall task success rates.

Large Language Models (LLMs) are increasingly integrated into various domains, making knowledge editing techniques crucial yet potentially hazardous. Current editing methods primarily target atomic facts, overlooking the significant risks associated with manipulating factual opinions, e.g., documented stances of public figures on societal issues. Such manipulation could reshape public images, influence elections, and alter societal views. To systematically assess this threat, we introduce the Factual Opinion Editing with Evidence (FOE) benchmark, which encompasses 261 public figures, 19 issue categories, and 2,178 complete opinion records. Our evaluations demonstrate that current editing techniques struggle significantly with factual opinions, often achieving only superficial changes while failing to preserve consistency between the edited opinion and the supporting evidence generated by the model. To address this limitation, we further propose a simple yet effective Self-Generated Evidence-Aligned method that achieves opinion-evidence alignment without relying on explicit instructions. Together, our benchmark and method provide a foundation for understanding the emerging security implications of factual opinion editing in LLMs.

Large Language Models (LLMs) have demonstrated impressive performance across various domains, including code generation and problem solving. However, their application in robotic control, particularly in low-level tasks that require precise manipulation, real-time feedback, and environment-dependent execution, remains limited. To address this challenge, we propose the Closed-Loop Modular Code Synthesizer framework. This framework leverages a pre-trained LLM without any task-specific fine-tuning to perform modular code planning and generation, and iteratively executes the generated code while inserting debugging probes to observe its behavior. This closed-loop structure facilitates systematic debugging and refinement, ultimately producing executable control programs. We apply the proposed framework to the calibration of an RGB-D camera and a robotic arm, validating its effectiveness in real-world settings. Furthermore, through a subsequent pick-and-place task, we demonstrate not only the accuracy of the calibration but also the potential extensibility of the framework. Across both tasks, the framework achieved high execution accuracy and autonomy, illustrating the practicality and scalability of LLM-based robotic control using our framework.

The rapid advancement of AI-driven video generation has transformed content creation, while simultaneously increasing the risk of misinformation through localized manipulations in long-form videos. Existing video forensic methods predominantly operate on short, independent clips, and thus fail to capture realistic scenarios where AI-generated content is sparsely embedded within otherwise authentic footage. To bridge this gap, we formulate the task of Temporal AI-Generated Segment Localization and Explanation, which targets authenticity detection, temporal localization, and interpretable analysis of manipulated segments in untrimmed long videos. We further introduce TASLE, a large-scale benchmark comprising 12,472 untrimmed videos with diverse manipulation patterns and rich annotation signals, including temporal boundaries, authenticity labels, and segment-level rationales. In addition, we propose MSLoc, a coarse-to-fine forensic baseline that combines a boundary-sensitive proposal generation module for efficient long-video scanning with an MLLM-based refinement module for precise boundary localization and interpretable reasoning. Experiments validate the effectiveness of the proposed baseline, highlighting the importance of segment-level explainable forensics for long-form AI-generated video analysis. Our dataset and code are publicly available at https://debby-0527.github.io/TASLE.

End-to-end manipulation policies, combined with web-scale pretrained Vision-Language Models (VLMs), show the promise for generalizable and dexterous robotic manipulation. However, they inherit two key limitations from 2D foundation models: 1) the reliance on 2D RGB inputs that ignores the intrinsically 3D nature of manipulation; and 2) the lack of spatial 3D alignment between input-output spaces as well as across diverse robot embodiments, camera setups, and trajectory datasets. In this paper, we present a series of contributions to address these issues. First, we introduce aligned vertex map and vertex spectrum -- a pixel-wise 3D representation that elevates 2D visual inputs to 3D, using camera calibration and optional depth. This novel input representation marries 3D awareness with the generalization of 2D large VLMs. Then, we propose to align the inputs and outputs of manipulation policies by expressing per-pixel 3D information of each camera view and robot actions to a shared coordinate. Based on this, we designate a canonical Bird's-Eye-View (BEV) alignment frame and innovatively propose to construct BEV images, producing a view-invariant representation robust to camera pose variations. To enable training and evaluation at scale, we develop a comprehensive data processing pipeline to perform such alignments; we also introduce a novel temporal alignment scheme for trajectories across diverse robots, human operators, and datasets. These contributions collectively mitigate input and output spatial-temporal misalignments, improving the consistency and generalization for real-world manipulation. Pretrained checkpoint, source code and data processing pipeline are available in https://hnuzhy.github.io/projects/Dex-BEV.

Transparent objects remain challenging for robotic perception due to unreliable depth sensing caused by refraction and reflection. While prior approaches rely on multi-view reconstruction or depth completion, they are often difficult to scale or deploy in real-world robotic systems. In this paper, we present a practical framework for transparent object perception and manipulation based on single-view RGB input. Our approach predicts voxel-space occupancy directly from a single image, providing a geometry-aware representation that supports downstream robotic grasping. To enable large-scale training, we construct a simulation pipeline that generates paired RGB images and voxel occupancy annotations under diverse materials and lighting conditions. We demonstrate that the predicted occupancy representation is robust to domain shifts and transfers effectively from simulation to real-world robotic setups without fine-tuning. A simple rule-based grasping strategy built on top of the occupancy further achieves reliable grasp performance on transparent objects. Extensive experiments in both simulation and real-world environments show that our framework provides accurate 3D understanding and enables practical manipulation of transparent objects. These results suggest that single-view occupancy prediction offers a scalable and effective solution for transparent object perception in robotics.

Robotic manipulation requires the effective integration of heterogeneous inputs, including visual observations, language instructions, and trajectory representations, to generate accurate actions. Existing transformer-based policies typically process these heterogeneous modalities within a shared parameter space, which often leads to modality interference and inefficient representation learning, especially in data-scarce scenarios. While Mixture-of-Experts (MoE) offers a scalable solution through expert specialization, conventional routing mechanisms are often sensitive to such cross-modal representation discrepancies, resulting in unstable expert assignment and expert collapse. In this work, we propose MATE (Multi-ModAl TrajEctory Policies), a novel trajectory prediction framework built upon MoE. Specifically, we introduce a Multi-Modal MoE architecture to achieve fine-grained sub-token feature decoupling, and design a cross-modal cosine router for stable and scale-invariant expert assignment across heterogeneous modalities. We further employ temperature-controlled routing and stochastic noise injection to improve expert balance and prevent premature routing collapse under scarce demonstrations. Experiments on the LIBERO benchmark show that our MATE consistently outperforms prior work under data scarcity. It achieves a 4.75% improvement in average success rate over the trajectory-guided counterpart. Real-world experiments on robotic ping-pong also suggest that the predicted trajectories can provide useful guidance for downstream robotic execution, further indicating the practical feasibility of our algorithm.

Strategic classification (SC) investigates scenarios where agents manipulate their features to obtain favorable decisions from predictive models. Existing fairness-aware SC approaches primarily focus on group fairness and typically assume that agents respond independently. However, when individual fairness is required, ensuring similar individuals receive similar outcomes, agents' manipulation becomes interdependent: an agent's preferred manipulation depends on the neighborhoods' outcomes. This induces a mismatch between classical SC formulations and fairness-aware decision settings, where independent models no longer accurately characterize strategic manipulations. To address this issue, we introduce individual fairness-aware strategic classification (IFSC), a framework that models peer-driven manipulation arising from individual fairness, where agents imitate nearby positively decided peers to obtain favorable outcomes. IFSC characterizes strategic manipulation as similarity-based imitation toward visible accepted peers and learns classifiers under the resulting post-manipulation distributions. To account for uncertainty in peer observability, IFSC employs a robust learning process that introduces stochastic perturbations during manipulation simulation. Experiments on synthetic and real-world datasets demonstrate that IFSC improves individual-fairness consistency and mitigates imitation-induced distortions.

We propose to turn generalist multi-embodiment value functions into reusable models for robot design. Instead of running a new reinforcement learning co-design loop for each robot, we first train an embodiment-aware policy and value function across many robot designs. After training, the frozen value function is used as a differentiable surrogate to optimize candidate embodiments through value gradients. We evaluate our approach across different robot design settings, from perturbed single robots to held-out robots across morphology classes, with single models trained on up to 50 robots and design spaces of over 1100 continuous embodiment parameters. Beyond optimizing complete embodiments, we show that value gradients can identify performance-limiting design and control parameters, enabling both the optimization and the analysis of new robot designs.

Reliable mobile manipulation in dynamic indoor environments requires a scene representation that remains geometrically consistent, semantically queryable, and computationally bounded as the environment changes. Existing systems often rely on pre-built maps, static-scene assumptions, or highly accurate camera poses, which can lead to stale or misaligned scene information when target objects are relocated or pose estimates are corrected. This paper presents DREAM, a real-robot mobile manipulation framework that integrates perception, memory, localization, navigation, and manipulation in previously unseen indoor environments without a pre-built map. DREAM constructs an online spatio-semantic voxel memory from RGB-D observations registered by a LiDAR-inertial-visual SLAM backend. It further introduces pose-graph-aware Redundancy-Aware Memory Pruning (RMP) to update historical observations after pose corrections while keeping long-horizon observation history bounded. For target localization and reacquisition, DREAM combines language-conditioned 3D retrieval, open-vocabulary image detection, and multimodal large language model based semantic verification. Real-robot experiments in four dynamic indoor laboratory scenes show that DREAM improves long-horizon task success rates from 40%-60% with DynaMem to 55%-70%, while maintaining a memory footprint of 0.37-0.63 GB and an online memory-update time of 0.43-0.53 s across scenes.

The persistent challenge in scaling authentic manipulator education within university laboratories is a structural dichotomy: commercial digital twins are often cost-prohibitive and rigidly scripted, whereas open-source robotics middleware (ROS) imposes steep technical and syntax barriers for novices. To resolve this logistical and educational friction, this paper proposes a scalable four-tier communication architecture tailored for sustainable robotic curricula. Rather than focusing on software application design, our study examines the underlying data exchange mechanisms required to bridge visual conceptual environments with physical robotic endpoints, utilizing the Graphical Open-Source Platform (GOSP) as a reference implementation. Our work details the framework's technical integration of 3D visual armature modeling with a robust ROS middleware backend, emphasizing the serialization, routing, and encapsulation of intricate communication routines. Preliminary sim-to-real validation using multi-axis spatial trajectories confirms that encapsulating these communication pipelines provides sufficient fidelity and a hardware-agnostic pathway. By bridging virtual design and physical execution, our architectural blueprint offers a viable infrastructure for engineering education.

Orientation-aware manipulation is essential in post-harvest agricultural processing, where produce must be grasped and placed in consistent configurations. This paper presents ROG-Grasp, a geometry-based robotic grasping and placement framework that estimates the produce orientation from root surface geometry using RGB-D perception. A YOLO-based root detector and point cloud plane fitting are used to infer the root normal, enabling stable grasp pose generation and orientation-constrained Cartesian motion planning. Experiments on tomatoes and onions demonstrate high success rates and stable execution time in both isolated and cluttered scenarios. Compared with vision-language-action (VLA) policies, the proposed method achieves more reliable and accurate grasp completion with faster execution. These results highlight the effectiveness of geometry-driven perception for practical orientation-controlled manipulation tasks. A video of our paper is available online https://youtu.be/Ir2UtGODdMo.

While Model Predictive Control (MPC) provides strong stability and robustness, it imposes a significant computational burden on real-time systems. This paper investigates the application of Behavior Cloning to approximate MPC policies for the real-time control of a 3-degree-of-freedom robotic manipulator. We present a baseline controller combining Inverse Kinematics with MPC and evaluate neural network architectures, ranging from classical regression algorithms to deep learning models including Deep MLPs and RNNs, to derive computationally efficient surrogate policies. We analyze generalization capabilities, stability considerations, and the trade-offs inherent in different architectural choices. Our empirical study employs both online and offline evaluations to assess performance regarding accuracy, computational efficiency, and fidelity to the original MPC policy. Our results demonstrate that Behavior Cloning can effectively reduce the computational burden of MPC policies for 3-DOF robotic manipulators, achieving a 3x reduction in inference latency with a 84.98% success rate under relaxed tolerances. Notably, we find that static architectures outperform temporal variants, confirming the sufficiency of instantaneous state observations for this task. However, we observe a precision gap under strict tolerances, which suggest that while Behavior Cloning captures the global optimal trajectory, further research is needed to minimize terminal steady-state error.

This paper addresses the challenge of simultaneously compensating for state-dependent uncertainties and enforcing time-varying state constraints in Euler-Lagrange systems, a common requirement in robotics that remains underserved by existing control designs. A novel adaptive control framework is developed that combines an artificial time-delay-based uncertainty estimation strategy, also known as time-delay estimation, with a barrier Lyapunov function to enforce constraint-aware control design. Specifically, a state-dependent upper bound on the time-delay estimation approximation error is analytically formulated, and an adaptive law is constructed to estimate its parameters online, enabling real-time state-dependent uncertainty compensation without relying on prior model knowledge. To ensure constraint compliance, the barrier Lyapunov function-based controller enforces time-varying bounds on both position and velocity. The resulting architecture is provably stable via Lyapunov analysis. Experimental results on a five-degree-of-freedom robotic manipulator validate the framework's capability, compared with the state of the art, in maintaining strict adherence to safety-critical constraints under dynamic uncertainties.

Diffusion-based imitation learning methods have driven rapid progress in robot dexterous manipulation tasks. However, they have limitations when applied to tasks that involve complex free-form surface constraints because of their lack of explicit surface geometry constraint modeling and the dynamic feasibility issue, resulting in stochastic action generation that fails to achieve reliable surface alignment and maintain stable contact. To address these limitations, we propose a novel surface constraint policy (SCP) for generating robot actions that satisfy free-form surface constraints on the basis of human demonstrations and real-time visual observations. First, the surface geometry constraint is encoded using a two-dimensional weighted Gaussian kernel function that is derived from demonstrations. Building on the encoded surface geometry constraints, the diffusion-based policy is used to infer task-level action intentions from multimodal sensory inputs, including visual observations and robot state feedback. These intentions are further transformed into surface-constrained dynamic movement primitives (DMPs) through a similarity-based action mapping method, thereby enabling smooth and compliant motion execution. The SCP achieves generation of structured surface geometric intent and dynamically admissible actions. The proposed method is validated on multiple surface manipulation tasks and compared with existing techniques. The experimental results demonstrate superior task success rates and contact stability under surface constraints.

Non-prehensile robot manipulation is challenging due to discontinuous, long-horizon interactions between the robot and the objects it manipulates. Sampling-based model predictive control methods are effective with discontinuous contact but face challenges with finding promising trajectories in long-horizon planning. We propose a closed-loop object-informed (CLOI) method that splits the problem into object-level planning to find long-horizon object poses that lead the object to its goal, and robot-level planning to select robot actions that follow those poses. We use model predictive path integral (MPPI) control to solve the subproblems and couple their solutions through consensus on the object poses using the alternating direction method of multipliers (ADMM). The object plan is revised toward robot-realizable object trajectories, while the robot plan is aligned with the object poses the task requires. In planar pushing tasks with obstacles using an xArm6 manipulator, CLOI increases the success rate by 35% in simulation and 43% on hardware, compared to standard MPPI given the same computational budget.

Articulated object manipulation is a unique challenge for service robots. Existing methods employ end-to-end policy learning, visionmotion planning, and large-language/visual-language model (LLM/VLM), but often overlook the diversity of articulated objects and the complexity of interactions between end-effector and handle, leading to limited generalization and destructive collisions. To address this, we propose GSAM, a generalizable and safe robotic framework for articulated object manipulation. Specifically, a vision-based perceiver generates the kinematic parameters. Considering that pre-trained markers in perceiver yield raw estimations that may deviate from commonsense, we present a f ine-tuned VLM-based refiner, using chain-of-thought (COT) commonsense reasoning to refine perception. To prevent destructive collisions, we design an interaction constraint function generator, integrating articulated object, interaction pose, and obstacle avoidance knowledge into a base. LLM then functionalize these constraints and apply them to trajectory and posture planning. A kinematic-aware manipulation planner verifies reachability for trajectory and posture. Experiments on 50 hinge tasks across 5 object categories and 50 randomly initialized end-effectorhandle configurations show that GSAM reduces standard deviation by 3.1% and improves manipulation success rate by 36.0% compared to the best baseline, respectively demonstrating the superior object generalization and interaction safety of GSAM in practical scenarios.

Robotic manipulation dexterity is often pursued by building increasingly complex high-DoF multifingered hands. While many robotic hands are designed to replicate human morphology, the functional role of human hands suggests a different perspective: much of their complexity may exist to enable tool use and tool making. This observation motivates Any-ttach, a tool-centric manipulation framework that treats quick end-effector swapping as a mechanism for dexterity with simplicity. Any-ttach combines a low-cost automatic swapping mechanism for an open-close robot interface, a handheld device for collecting human demonstrations, and a task planning framework that composes learned, parameterized, and planned tool-use skills. The system supports diverse tools and end-effector modules, including daily tools, articulated tools such as scissors, Fin Ray fingers, and a low-cost anthropomorphic hand, through the same shared interface. Our experiments show that Any-ttach improves tool-swapping reliability, increases demonstration efficiency, reduces tool-pose variability, and supports diverse tool-use skills. In two long-horizon tasks, making a sandwich and preparing a cucumber, Any-ttach executes six tool-use subskills through end-effector switching and execution monitoring. These results suggest that robots can expand manipulation capability not only through more complex end-effectors, but also through rapidly exchangeable tools and end-effector modules. More details and videos are available at https://any-ttach.github.io/.

Manipulating thin objects requires precise contact geometry and reliable force perception, yet many anthropomorphic robotic hands lack the mechanical and sensing capabilities needed for such interactions. We present the ARISTO Hand, a tendon-driven robotic hand that integrates active distal hyperextension with a hybrid fingertip-sensing architecture that combines a rigid, nail-mounted force-torque sensor and a soft capacitive tactile array. Active hyperextension enables controlled fingertip engagement beyond the kinematic limits of standard flexion, increasing pull-out force by 2.76x for object thicknesses of 1-20 mm while preserving the nominal grasp capability. The rigid nail-mounted sensor provides reliable force measurements during edge contacts, where the sensitivity of proprioceptive force estimation degrades as the contact geometry approaches kinematic singularities. We validate the proposed architecture through quantitative force characterization and a multi-stage SD card extraction and insertion task. Video and supplementary materials are available at: https://aristohand.github.io

Vision-Language-Action (VLA) models have shown promise for robotic manipulation, yet most existing policies operate reactively by directly regressing actions from current observations, without explicitly modeling future dynamics. This limits their ability to generalize under out-of-distribution perturbations. To address this issue, we propose ELAN4D, an embodiment-centric, 4D-aware training framework that enhances VLA policies with future robot keypoint tracks as predictive spatio-temporal supervision. Using only forward kinematics from proprioceptive states, we derive 3D displacement tracks of robot keypoints, such as joints and the end-effector, with negligible preprocess cost. These tracks provide metric and compact supervision without requiring external trackers or reconstruction. A plug-and-play auxiliary branch with a lightweight track decoder injects this 4D signal into the action expert while preserving the pretrained vision-language backbone through gradient isolation. The track decoder is discarded during inference, leaving the base policy interface unchanged. Extensive experiments on LIBERO, LIBERO-Plus, RoboTwin2.0 and real-world manipulation tasks demonstrate that ELAN4D consistently improves over strong VLA baselines, achieving the best overall performance and substantial gains under out-of-distribution perturbations, including camera, background, and layout shifts. These results highlight the effectiveness of embodiment-centric 4D supervision for building more robust and generalizable manipulation policies.

Vision-Language-Action (VLA) models have recently shown strong potential for robot learning by following language instructions. However, in practice, language alone is often insufficient to precisely convey human intent. It is difficult to describe which exact object to interact with among similar candidates, where to act on the object, or how the target may change during execution. To address this limitation, we propose Gaze2Act, a novel VLA framework that leverages human gaze as a dynamic and intuitive intent signal for complex interactive manipulation. Gaze2Act first bridges the ego-exo view gap by mapping first-person gaze into the robot's perspective through cross-view semantic matching, producing both an object mask and a gaze point for coarse-to-fine target specification. These cues are then integrated into the policy through perception-level prompting and action-level conditioning, allowing the robot to attend to relevant regions and execute precise interactions under dynamic intent. In a systematic evaluation across seven task categories and 16 real-robot tasks on a Unitree G1 humanoid, Gaze2Act achieves state-of-the-art performance in both intent accuracy and task success rate. It notably outperforms baselines in object disambiguation, fine-grained interaction, and dynamic intent steering. These results demonstrate that human gaze provides a natural, low-burden, and highly expressive modality for human-in-the-loop VLA control.

Multi-step robot manipulation requires acting under uncertainty about how the scene will evolve, making exploration and policy adaptation challenging. We study whether short-horizon, task-consistent future videos can provide useful structured priors for control and reinforcement-learning fine-tuning. We formalize this idea through Future-Experience Conditioning (FEC), a simple interface that conditions closed-loop policies on a latent representation of a short future video. In our simulation setup, future clips are generated in three stages, an LLM reasoner operating over a task ontology initialized from the current scene state, a robot-free digital-twin rollout of the intended object motion, and a mask-free video diffusion model that synthesizes a robot-consistent future clip without requiring segmentation at inference. We instantiate this future-conditioning interface primarily with BC and BC+RL, and compare against a future-conditioned Streaming Flow Policy (SFP) baseline on RoboCasa and CALVIN under NoFuture, GTFuture, GenFuture, and WrongFuture. Generated futures improve performance over no-future conditioning, while mismatched futures degrade it, and our BC+RL instantiation achieves the strongest overall results. An average BC+RL learning-curve analysis across 8 CALVIN tasks further shows that GTFuture improves fastest, GenFuture improves earlier and to a higher level than NoFuture, and WrongFuture remains at zero throughout training. These results suggest that short-horizon future videos can serve as useful structured priors for exploration and policy adaptation under imperfect future predictions. https://enact2026.github.io/

When using reinforcement learning (RL) for contact-rich robotic manipulation, vision can provide task-relevant information that accelerates learning beyond what proprioception alone can achieve. However, vision-enabled policies tend to overfit to the visual conditions seen during training, limiting their robustness and transferability. We present a human-in-the-loop RL framework that employs teacher-student distillation to achieve robust performance across multiple task variants, trained entirely in the real world without requiring domain randomization or data augmentation. A vision-enabled teacher distills its knowledge into a vision-free student that relies solely on pose, twist, and wrench sensing, combining fast training with strong task generalization. On the real-world NIST assembly benchmark board, our approach achieves 95% overall success after approximately 50 minutes of training on 3 representative tasks, including robust generalization to 8 unseen task variants. Fine-tuning with distillation achieves full success on the most challenging task. We demonstrate that the resulting policies outperform baselines in both robustness and adaptability.

Vision-Language-Action~(VLA) models have shown strong potential for general-purpose robotic manipulation, yet they still struggle to generalize to unseen tasks that necessitate transferring relevant experience across objects, scenes, and action patterns. This paper proposes VLA-Pro, a plug-and-play framework designed to enhance cross-task generalization by storing task-relevant procedural memories at training time and transferring these memories during inference. Specifically, VLA-Pro stores task-specific LoRA adapters as parameterized procedural memories during training. At inference time, VLA-Pro retrieves relevant procedural memories based on the current multi-modal context and dynamically fuses these memories for generating the current action chunk. Experiments on RoboTwin, RLBench, and real-world manipulation tasks show that VLA-Pro consistently improves cross-task generalization across multiple backbones, achieving up to a 207% relative improvement in simulation and increasing real-world success rate from 5.8% to 65.0%. These results suggest that procedural memory retrieval and adaptation provide an effective mechanism for transferring manipulation experience to novel tasks while preserving modularity and execution stability.

Vision-Language-Action models have achieved remarkable progress in robotic manipulation, yet they suffer from a critical limitation: a lack of 3D scene understanding. This deficiency manifests as three intertwined challenges: weak extraction of 3D spatial positions without enforcing multi-view consistency, inadequate 3D instance understanding, and fragile reasoning under occlusion. Although mature 3D perception methods exist, their direct integration into VLA pipelines is hindered by architectural incompatibility and by heavy reliance on costly instance-level annotations. To address the above challenges, we propose 3DVLA, a plug-and-play framework that injects robust 3D reasoning into pretrained VLAs without requiring extra manual labels or discarding VLM priors. Specifically, 3DVLA tackles the three challenges through: (1) pervasive 3D feature encoding with explicit multi-view consistency constraints across all modalities and a Spatially-Conditioned Geometry Aggregation method, (2) an instance estimation module with high-level instance tokens for 3D instance awareness, and (3) a masked self-supervised 3D encoding branch that retains its predictor for visual token completion to handle occlusions. We integrate 3DVLA with multiple VLA baselines and evaluate on LIBERO-Plus and RoboTwin 2.0. Results show consistent and significant gains in manipulation performance, validating both the effectiveness and plug-and-play compatibility of our approach.

Reliable midair docking between small unmanned aerial vehicles (UAVs) is essential for modular aerial cooperation and manipulation, but it requires precise relative-pose control and repeatable platform under tight thrust and payload constraints. We present a dual-drone docking platform where two quadrotors operate in a leader-follower formation and dock using a lightweight modular frame with passive magnetic latching. A progress-aware mission supervisor manages phase transitions: approach, alignment, capture, and settle. This platform integrates a complete hardware-software stack (ROS 2 with Crazyflie/PX4 interfaces) and synchronized logging for benchmark evaluation. We evaluate the platform in simulation and real-world experiments using quantitative metrics such as formation error, baseline and yaw consistency, docking success rate, time-to-dock, and failure-mode statistics. The platform enables statistically grounded comparison of docking supervision and synchronization strategies and provides a practical testbed for modular aerial cooperation and repeatable midair aerial manipulation.

This paper presents a phase-conditioned, force-aware framework for robust deformable object manipulation. Standard imitation learning policies such as Action Chunking with Transformers (ACT) rely on a Markovian assumption at inference, causing state aliasing when visually similar observations require contradictory actions and preventing autonomous recovery from execution failures. We address this with a closed-loop hierarchical architecture. A FiLM-conditioned ACT encoder modulates feature extraction based on the current task phase, enabling a single unified policy to produce phase-specific behaviors while sharing action dynamics across phases. A multi-modal phase predictor fusing visual, force, and pose feedback estimates the phase in real time, detecting contact failures that are invisible to vision alone and autonomously triggering recovery trajectories. The system is completed by a hybrid impedance controller for compliant execution and a haptic teleoperation interface for force-aware data collection. Ablation studies show that FiLM-based modulation significantly outperforms both unconditioned and token-level conditioned baselines, and t-SNE analysis confirms that FiLM induces well-separated, phase-specific feature representations. Validated on hanging and removing a T-shirt with dual arms, the closed-loop system improves the hanging success rate from 56% to 87% through autonomous error recovery. Code and videos: https://leledeyuan00.github.io/phaser/

Natural language interfaces can simplify interaction with multi-robot systems, especially when non-expert users need to issue high-level commands. Acoustic manipulation using ultrasonic phased arrays also enables contactless object handling for applications such as healthcare, laboratory automation, and precision transport. However, combining large language models (LLMs) with distributed acoustic mobile robots remains underexplored. This paper presents a decentralized framework for natural language-driven coordination of acoustic robots for contactless object manipulation. The system converts spoken instructions into executable multi-robot task plans using Whisper-based speech recognition, LLM-based semantic parsing, structured JSON task representation, and distributed scheduling. The JSON schema encodes robot assignments, temporal dependencies, spatial constraints, and synchronization requirements for sequential, parallel, and synchronized execution. The system is implemented on two TurtleBot3-based acoustic robots, each equipped with an ultrasonic phased array for contactless object transport. Experiments were conducted in three scenarios: sequential execution, parallel multi-robot transport, and synchronized cooperative manipulation. The system achieved task success rates of 96 percent for sequential tasks, 86 percent for parallel execution, and 70 percent for synchronized collaborative transport. These results show that natural language commands can be transformed into distributed robot actions for contactless manipulation, highlighting the potential of LLM-driven automation for human-robot interaction in distributed robotic systems.

Bimanual coordination is essential for many real-world manipulation tasks, yet learning bimanual robot policies is limited by the scarcity of bimanual robots and datasets. Single-arm robots, however, are widely available in research labs. Can we leverage them to train bimanual robot policies? We present MonoDuo, a framework for learning bimanual manipulation policies using single-arm robot demonstrations paired with human collaboration. MonoDuo collects data by teleoperating a single-arm robot to perform one side of a bimanual task while a human performs the other, then swapping roles to cover both sides. RGB-D observations from a wrist-mounted and fixed camera are augmented into synthetic demonstrations for target bimanual robots using state-of-the-art hand pose estimation, image and point cloud segmentation, and inpainting. These synthetic demonstrations, grounded in real robot kinematics, are used to train bimanual policies. We evaluate MonoDuo on five tasks: box lifting, backpack packing, cloth folding, jacket zipping, and plate handover. Compared to approaches relying solely on human bimanual videos, MonoDuo enables zero-shot deployment on unseen bimanual robot configurations, achieving success rates up to 70%. With only 25 target robot demonstrations, few-shot finetuning further boosts success rates by 65-70% over training from scratch, demonstrating MonoDuo's effectiveness in efficiently transferring knowledge from single-arm robot data to bimanual robot policies.

Magnetically actuated microrobots have been used as wireless, non-contact manipulation tools at microscales, making them promising for minimally invasive applications. However, their control remains challenging due to indirect actuation, limited sensing, and nonlinear magnetic interactions. In this work, we propose Mag-VLA, a vision-language-action (VLA) model for dexterous magnetic microrobot manipulation using two robotic arms with mounted magnets for dynamic magnetic-field construction. Bimanual coordination enables capabilities such as microrobot reorientation that are difficult or infeasible with a single arm, but it also introduces coupled control challenges, as the policy must generate coordinated trajectories for both actuators within a shared workspace. Our framework adapts a Qwen2.5-VL-7B backbone using Low-Rank Adaptation (LoRA) to process visual observations and language instructions for action prediction. To capture task progression, we introduce a motion-aware phase classifier and a phase-conditioned Action Chunking Transformer (ACT) decoder for temporally coherent multi-step control. We further construct a teleoperated magnetic microrobot manipulation dataset covering three task configurations. Ablation studies show that the ACT-based decoder substantially outperforms alternative generative action heads. In real-robot experiments, Mag-VLA achieves a 90% approach success rate across all tasks and transport success rates of 80%, 70%, and 50% as task difficulty increases. These results demonstrate that hierarchical VLA modeling provides a promising framework for magnetic microrobot manipulation.

Multimodal manipulation detection aims to simultaneously identify forged image--text pairs and localize tampered regions, yet existing methods typically rely on memorizing isolated artifacts and struggle with imperceptible manipulation traces or domain shifts. Inspired by human comparative reasoning, we reformulate this task as a reference-grounded verification problem, where authenticity is assessed by comparing a query against retrieved authentic evidence. We propose REVEAL Reference-Enabled Verification for Evidence Analysis and Localization), a framework explicitly designed for this comparative paradigm. To support this paradigm, we construct a large-scale reference library comprising 170K authentic news image--text pairs featuring over 40K public figures. Technically, REVEAL employs a difference-aware fusion mechanism to capture fine-grained discrepancies between the query and retrieved evidence. Furthermore, we introduce a task-decoupled Mixture-of-Experts (MoE) architecture to jointly execute instance-level detection and fine-grained grounding, effectively mitigating optimization conflicts between these heterogeneous objectives. Extensive experiments demonstrate that REVEAL significantly outperforms state-of-the-art methods, and notably enables \emph{training-free domain adaptation} by simply updating the reference library, offering a robust and practical solution for detecting evolving misinformation. Code is available at https://anonymous.4open.science/r/REVEAL-Reference-A006.

We present ProgVLA, a compact vision-language-action (VLA) model designed for reliable robot manipulation under tight compute and memory budgets. The model specifically focuses on efficiently processing long multi-modal sequences by maintaining an explicit representation of task progress over extended horizons. To this end, ProgVLA integrates two key components. First, a multi-modal encoder with a two-stage Perceiver resampling scheme compresses variable-length visual, language, and proprioceptive streams into a fixed set of control-ready context tokens, substantially reducing sequence length while preserving cross-modal grounding. Second, an auxiliary set of progress heads is trained with offline reinforcement learning (RL) objectives to jointly learn critics over normalized remaining-horizon targets. This provides the policy with an internal estimate of task progress and enables advantage- and success-weighted flow-matching imitation learning. On two well-established multi-task robot manipulation benchmarks, a 0.1B-parameter ProgVLA model reaches success rates that are competitive with, and on long-horizon and harder task tiers exceed, substantially larger pretrained baselines. Ablations indicate that the learned context resampler and task-adaptive visual fine-tuning are the largest single contributors, while progress-aware training provides a consistent additional gain that is concentrated on long-horizon and multi-object tasks. We further validate the approach in real-world toy-kitchen environments.

Instructing robots from demonstrations can be done through different teaching modalities, each with different usability and performance trade-offs. This paper compares kinesthetic guidance, joystick teleoperation, and hand gestures in a user study with eight participants. We evaluate replay success, modified NASA-TLX workload, and common teaching errors across three manipulation tasks. Kinesthetic guidance produced the shortest demonstrations, lowest workload, and highest success on the more orientation-sensitive and contact-rich tasks. Joystick teleoperation performed best on simple peg picking. Hand-gesture teaching, although less reliable overall, performed better than expected and in some cases achieved results comparable to kinesthetic guidance.

Robotic manipulation depends on the ability to anticipate how actions reshape objects, contacts, and scene geometry before execution. Learned world models provide this capability by predicting task-relevant future evolution under robot intervention, yet the term now spans latent dynamics models, action-conditioned video generators, three- and four-dimensional scene predictors, physics-informed simulators, and predictive modules inside vision-language-action systems. This breadth has fragmented the literature and obscured the design choices that matter for manipulation. We survey world models for robotic manipulation through three questions: what future representation is predicted, how prediction is connected to action, and when prediction is used in the robot-learning pipeline. We operationally define a world model as an action-conditioned predictive system and distinguish it from perception modules, inverse models, policies, rewards, and value functions. We then organize existing work into five representation families, develop a functional taxonomy that separates integrated prediction-action models from explicit predictive planners, and characterize infrastructure roles including synthetic experience generation, candidate filtering, search-based evaluation, learned environments, and outcome verification. We further map these roles across pretraining, post-training, and inference adaptation, review 34 manipulation datasets, and synthesize evaluation protocols for predictive fidelity, task performance, and simulator reliability. This survey shows that world models are evolving from task-specific dynamics predictors into predictive infrastructure for robot learning, while exposing open challenges in contact modeling, hallucination control, action alignment, and benchmarking under closed-loop use.

We propose an optimization-based framework for robust contact-rich manipulation. Recent contact-implicit methods enable online hybrid planning across contact modes, allowing closed-loop manipulation for a given target state and contact location sequence of the robot and object. However, most existing approaches lack the ability to autonomously reason and generate diverse contact location sequences and manipulation trajectories, i.e., active contact location selection, which limits their applicability to relatively simple tasks. Active contact location selection is challenging due to complementarity in contact dynamics and the sparse gradients, making the design of a unified framework for contact selection and planning difficult. To address these challenges, we introduce Simultaneous Contact Selection and Planning (SCSP), a cascaded optimization framework comprising Contact Selection Optimization (CSO) and Contact Planning Optimization (CPO). CSO leverages a surrogate contact model and discrete-continuous optimization to efficiently resolve the nonsmoothness and coupling in contact selection, enabling online global searching of optimal contact locations. CPO performs prior-guided contact planning by evaluating the reference contact locations produced by CSO and generating corresponding manipulation trajectories in real time for redundant manipulators. Extensive simulations and real-world experiments demonstrate that SCSP produces diverse manipulation behaviors and robust control under inaccurate dynamics and perceptual noise. We further validate the generalization of the framework on challenging manipulation tasks. Project website: \href{https://sites.google.com/view/scsp-robot}{https://sites.google.com/view/scsp-robot}.

Tactile sensing is essential for robots to achieve human-like gentle manipulation. However, existing Vision-Language-Action (VLA) models struggle to exploit tactile feedback for gentle manipulation due to scarce aligned vision-tactile-language data and the lack of effective closed-loop force feedback mechanisms. To address these challenges, we introduce Tabero, a benchmark and model suite for gentle, language-conditioned robotic manipulation that demands fine-grained contact force perception. First, the Tabero benchmark addresses the scarcity of tactile data by presenting a data-efficient pipeline that repurposes open-source robot manipulation trajectories to generate diverse vision-tactile-language tasks, and establishes a multidimensional evaluation protocol that measures task success alongside physical interaction quality. Second, we propose Tabero-VTLA, an architecture with a decoupled force-position command interface; the resulting force-position commands are executed by a fixed hybrid controller to enable real-time, force-aware manipulation. Evaluated on Tabero, our model maintains high task success while reducing average grip force by over 70% under gentle instructions, demonstrating its ability to modulate interaction forces based on multimodal experience. Our code is publicly available at https://github.com/NathanWu7/Tabero.

Semantic mapping methods are increasingly used as intermediate scene representations for downstream robotic reasoning and manipulation, yet their evaluation is still largely tied to fixed benchmark datasets with limited coverage of manipulation-relevant corner cases. In this work, we extend OSMa-Bench toward controllable benchmarking with prompt-generated synthetic indoor scenes. Our pipeline automatically generates scene descriptions, synthesizes corresponding environments with SceneSmith, and adapts the resulting assets into an OSMa-Bench-compatible simulation format. This adaptation requires a nontrivial intermediate layer, including semantic normalization, material and texture repair, shader fallback policies, floor handling, navigation setup, and controlled lighting configuration. A key advantage of the proposed setup is that the original scene-generation prompt is known in advance and can therefore serve as an auxiliary semantic specification of the intended scene. We use this property to extend the VQA component of OSMa-Bench with a prompt-grounded question category. The resulting framework supports targeted stress-testing of semantic scene representations under conditions such as clutter, small objects, partial occlusions, and lighting variation, and makes benchmarking more extensible and better aligned with downstream manipulation requirements. Our code is available at https://github.com/be2rlab/OSMa-Bench-v2.

Robotic haptic devices combined with virtual reality offer novel opportunities to train fine force generation, an essential yet overlooked component of post-stroke rehabilitation. This study proposes that manipulating the rendered dynamics of tangible virtual objects can be leveraged to train precise force control while engaging the somatosensory system. We conducted an experiment with fifty healthy participants who performed a curling-inspired task in which they had to stretch a virtual spring to generate a target release force to propel the stone to a predefined location on the ice sheet. During training, the spring's force-elongation relationship was modeled as either a linear or non-linear function, i.e., a Gaussian or antisymmetric Gaussian (AS-Gaussian) function with zero derivative at the release target force. Results indicate that the AS-Gaussian group consistently achieved higher force accuracy during training than the linear group, while the Gaussian group only outperformed the linear group toward the end of training. Analysis of personality traits revealed that higher Free Spirit scores were associated with poorer performance and reduced task exploration under Gaussian dynamics, whereas higher Transform-of-Challenge scores correlated with increased exploration. Despite these training effects, no significant differences in long-term retention were found across spring types or personality traits. Participants primarily relied on learned target elongation rather than target force, as evidenced by performance in a transfer task with a different stiffness but the same target force. While promising for somatosensory neurorehabilitation, these methods require refinement to reduce reliance on proprioceptive cues before testing with neurological patients.

Scaling data volume and diversity is critical for generalizing embodied intelligence. While synthetic data generation offers a scalable alternative to expensive physical data acquisition, transferring robotic manipulation policies from simulation to the real world (sim-to-real) remains a formidable challenge due to the domain gap. This paper presents HyperSim, a holistic framework spanning from synthetic data generation to policy training and seamless real-world deployment. To systematically bridge the sim-to-real gap, HyperSim is realized through three core pillars: high-fidelity environment synthesis, adversarial trajectory generation, and sim-and-real co-training. Collectively, these modules address domain discrepancies by enhancing visual fidelity, expanding data coverage, and enforcing domain-invariant representations. We rigorously validate HyperSim through a large-scale empirical study involving 400 real-world task executions across two representative manipulation models. Assessed across three fine-grained metrics, our complete pipeline achieves remarkable sim-to-real success rates of 80% and 95% with ACT and π_{0}, respectively. Furthermore, policies trained on our adversarial trajectories exhibit significantly enhanced robustness against dynamic uncertainties, achieving a 35% higher completion rate under physical perturbations.