Search research

Reinforcement learning (RL) for legged robots is advancing locomotion, demonstrating its ability to adapt to new and challenging terrain. Traditionally, these RL locomotion frameworks are position-based, making the policy less adaptable to terrain types and requiring state estimation techniques in the observation space, i.e., linear velocity. Moreover, these RL frameworks often use small, lightweight quadrupeds that are limited in their viability for high-complexity tasks due to hardware constraints. This work explores an RL torque control framework for heavyweight high-torque quadrupeds. The RL framework in this paper can traverse rough terrain and effectively track a desired linear velocity without requiring knowledge of the agent's current velocity. Using Nvidia's Isaac Sim and Isaac Lab, simulation results of the RL torque control policy are shown on the Unitree B1 quadruped, achieving speeds of 3.5 m/s and 1.5 rad/s. In addition, the quadruped can walk up and down stairs without the aid of an exteroceptive sensor.

Learning-based approaches to locomotion have risen in popularity in recent years, showing the capability for complex legged locomotion and whole-body control. Reinforcement learning (RL), the primary learning-based approach for locomotion, often utilizes a high-performance simulation tool, providing a controlled and efficient training and development environment. However, policies that perform well in simulation frequently encounter unexpected challenges when deployed on a physical system, known as the sim-to-real gap. This work presents a robust RL locomotion framework capable of whole-body control. The proposed RL framework utilizes Nvidia's new set of simulation tools, Isaac Sim, and its companion RL framework, Isaac Lab, for training, achieving a zero-shot sim-to-real policy. The performance of our policy is validated on physical hardware using the Unitree Go1, with experimental results showing similar velocity tracking performance to the quadruped's integrated controller, with a greater ability to recover from large disturbances, and achieve linear velocities of 2.0 m/s and angular velocities of 1.8 rad/s.

The Duke Robotics Club presents Oogway and Crush, our AUVs for RoboSub 2026. This year's strategy expands on our previously narrowed scope, targeting all four of RoboSub's design goals for the first time: movement, vision, manipulation, and acoustic tracking. This expansion is based on sustained reliability investment across all three subsystems. Mechanically, Crush gained two additional thrusters and a CFD-optimized case, providing pitch stability. Electrically, we addressed accumulated failure points by repairing unreliable connections and upgraded thruster control hardware. We also redesigned our acoustics system, adding a new custom PCB with higher-order filters, significantly improving pinger detection reliability. On the software side, improvements to state estimation, sonar-based object detection, vision-driven task planning, and IVC enable more capable and coordinated autonomous runs. Paired with investments in our testing infrastructure to maximize our limited pool time, we can now attempt a broader set of tasks while maintaining the reliability our competition strategy demands.

Fast planning of novel behaviors in unseen scenarios remains a fundamental challenge in robotics. The high-dimensional, hybrid, and underactuated nature of humanoid loco-manipulation continues to hinder the realization of this goal. In this paper, we address this challenge by proposing a nested kino-dynamic framework for rapid feasibility checking and dynamically consistent trajectory generation given a candidate contact sequence. By integrating this module with a feasibility-guided tree search and a Large Language Model (LLM)-based contact plan sampling strategy, we demonstrate that the proposed framework can substantially improve the search process. Furthermore, we show that the generated trajectories can be tracked using a reinforcement learning (RL)-based controller and show that the resulting trajectories are of sufficiently high quality for execution in real-world loco-manipulation scenarios. A supplementary video is available at: https://youtu.be/R6qCHoCormQ.

Identity-preserving text-to-video generation aims to synthesize a video that accurately follows a textual description while maintaining the recognizability of a user-specified subject throughout. The IPVG26 challenge extends this framework from a single holistic prompt to a temporally structured specification. The model additionally receives a sequence of timestamped action captions and must render the subject performing these actions in the specified order. This temporal structure presents a challenge not encountered in previous identity-preserving generation tasks, as the subject must continuously perform a scripted sequence of distinct actions while maintaining a consistent identity. However, end-to-end video generators are prone to appearance drift as motion accumulates and the depicted actions change. We address this challenge with a training-free, three-stage pipeline framework. An action-aware prompt polishment stage first rewrites the inputs into image-generation prompts that specify the terminal state of each action. An identity-preserving generation stage then produces the keyframe sequence by conditioning each frame jointly on the reference identity and its predecessor, thereby decoupling time-invariant appearance from time-varying pose. Finally, an identity-aware inference enhancement stage synthesizes the intermediate segments using multi-reference guidance and identity-driven noise searching, both of which reinforce identity fidelity during sampling. Our method ranked third on the official Track 2 leaderboard, demonstrating competitive performance and strong generality.

Learning is increasingly introduced into visual-inertial odometry (VIO), ranging from learned feature front-ends to learning-dominant motion and geometry estimation. However, learning more of the pipeline does not necessarily improve robustness when deployment conditions differ from the training distribution. This work asks whether robust VIO under distribution shift truly requires deeper learned estimation, or whether learning can be confined to visual measurement generation. We propose a minimal-learning stereo VIO framework in which SEA-RAFT is used only to propose dense stereo correspondences and predict their uncertainty, while temporal tracking, geometric verification, and state estimation remain explicit. Dense flow is sampled at sparse feature locations, filtered using predicted uncertainty and stereo epipolar consistency, and incorporated into a sliding-window stereo-inertial estimator through uncertainty-weighted reprojection factors. The same uncertainty is further propagated through stereo triangulation for downstream anisotropic 3D Gaussian mapping. Experiments on EuRoC, VIODE, and 4Seasons demonstrate accurate and stable estimation under motion blur, dynamic scenes, illumination changes, and large indoor-to-outdoor distribution shifts. Ablations show that learned flow alone is insufficient: the gains arise from combining learned correspondence proposals with geometric verification and uncertainty-aware weighting. These results suggest that, for OOD-robust VIO, carefully integrated learned visual measurements can be more effective than learning a larger fraction of the estimation pipeline. Code and configs for the benchmark will be open-source upon acceptance. A supplementary video is available at https://drive.google.com/file/d/1EVRhOkhanmNXHbQS1Vr80FoEIAYOYOV2/view

Collaborative robots are increasingly sharing workspaces with human operators, making tool handover a frequent and safety-critical micro-interaction. However, traditional static handovers often lead to awkward grasps when handling asymmetric industrial tools. This paper presents a receiver-centered voice-driven adaptive handover system for mechanical tools, built on a Franka cobot. Using an LLM for intention recognition and MediaPipe for real-time 3D hand tracking, the framework dynamically adjusts the end-effector's orientation to present tools in an ergonomically optimal, handle-first pose. A within-subjects study compared this adaptive approach with an object-agnostic static baseline. The results demonstrate that the adaptive system reduces the grasp delay for asymmetric tools, improving the fluency of the interaction. Furthermore, the adaptive strategy improved specific trust-related perceptions, particularly motion predictability and perceived task simplicity.

Egocentric devices, such as wearable front-facing cameras, provide a unique perspective for capturing the continuous interaction between a human viewer and the surrounding environment. A holistic and efficient multimodal model capable of reconstructing this 4D representation is therefore highly desirable. However, existing approaches often rely on auxiliary inputs such as pre-computed camera trajectories, treat scene perception and human ego-motion modeling as separate problems despite their strong interdependency, and suffer from slow inference time. To address these limitations, we present ReViV, the first unified framework for holistic egocentric 4D reconstruction that extracts both viewer and view dynamics from a single monocular RGB video. We formulate the task as learning the full joint probability distribution over multimodal signals, including RGB video, camera trajectory, gaze direction, full-body motion, hand motion, and depth. Powered by a Masked Generative Egocentric Transformer, ReViV operates within a single feed-forward architecture to simultaneously reconstruct the temporally consistent 4D reconstruction across the viewer and the view with fast inference speed. Extensive experiments on diverse benchmarks, including HoloAssist, HOT3D, ARCTIC, Aria Digital Twin, and TACO, demonstrate that ReViV achieves state-of-the-art accuracy and efficiency across holistic ego-body, hand, and gaze reconstruction, camera tracking, while maintaining highly competitive egocentric depth estimation without relying on heavy task-specific priors. Code and models are fully open-sourced: https://reviv4d.github.io/.

Foundation models pretrained using self-supervised learning have transformed computer vision by learning transferable representations from large-scale unlabeled data. However, existing foundation models for neuroimaging remain limited by task-specific training, slice-based learning strategies, or relatively small pretraining datasets, restricting their generalizability across diverse brain MRI applications. In this work, we present BrainNext, a general-purpose self-supervised foundation model for volumetric brain MRI analysis. BrainNext combines masked autoencoder (MAE) pretraining with a native three-dimensional Bi-Directional xLSTM-UNet architecture to learn rich anatomical representations from 60,551 unlabeled brain MRI examinations spanning multiple MRI modalities. The pretrained model is subsequently adapted to downstream tasks through lightweight task-specific fine-tuning. We evaluate BrainNext on the Foundation Models for Medical Imaging (FOMO) 2025 Method Track, encompassing classification, segmentation, and brain-age estimation, where it achieved second place overall and ranked first in the meningioma segmentation task on the official FOMO 2025 challenge leaderboard, demonstrating strong transferability across heterogeneous neuroimaging tasks. These results highlight the potential of large-scale self-supervised pretraining to learn robust and transferable volumetric representations, establishing BrainNext as a scalable foundation model for diverse brain MRI applications.

ETAS is a programming language for agent systems that treats model-backed agents, tool calls, prompts, typed memory, human approvals, policies, and execution traces as semantic program elements rather than library conventions. It separates deterministic computation from agentic nondeterminism and externally visible actions while preserving a direct programming style. We present the core design of ETAS. Its static semantics assigns ordinary types through spec conformance and tracks each computation with two behavioral indices: an escaping effect row and a persistent abstraction of the typed action trace it may request. Specs form a terminating compile-time constraint calculus: type specs provide evidence for polymorphism and resource facts, callable specs constrain function and stage shapes, and trace specs express allow, deny, and temporal constraints. Typing checks requested traces against compiled monitors and emits residual obligations when dynamic resources preclude a complete static proof. The dynamic semantics distinguish requested, handled, denied, and committed events; handlers interpret typed actions without making their requests invisible to authorization or audit. We formalize a core calculus and state preservation, progress, type/effect soundness, handler trace-transparency, and policy safety. We also implement ETAS in Rust with a command-line interface, typed HIR checks, effect and policy diagnostics, handler checks, and trace-aware execution hooks. ETAS provides a programming-language foundation for reasoning about authorization, nondeterminism, recovery, and audit evidence before and during agent execution.

Existing methods in Autonomous Valet Parking (AVP) typically rely on pre-built maps, which severely restricts their scalability to unseen environments and open-vocabulary targets. Inspired by the application of Vision-Language Models (VLMs) in Vision-Language Navigation (VLN) tasks, we propose VLN-AVP, a zero-shot navigation framework for AVP tasks. By combining the precise spatial perception of a Bird's-Eye-View (BEV) model with the general intelligence of VLMs, our framework 1) eliminates the dependency on pre-built maps, 2) interprets semantic environmental contexts in parking scenarios, and 3) enables intuitive navigation following natural language instructions. Specifically, we introduce a hybrid memory system: a short-term perception memory tracks semantic visual cues to address the limitations of VLM's single-frame reasoning in existing methods, while a long-term topological memory facilitates stable policy learning from past experiences. To bridge the gap in existing benchmarks, we also present the VLN-AVP dataset and benchmark. Featuring 10 high-fidelity parking scenes and over 1,000 navigation episodes, it has the largest number of garage scenes to date and is the first VLN benchmark for underground parking. Extensive experiments demonstrate that in simulation, our method achieves an over 25% improvement in success rate compared to VLN methods and an over 15% improvement compared to other autonomous driving methods. Furthermore, it attains a leading success rate in real-world vehicle experiments, proving its practical feasibility.

Proactive agents are expected to anticipate user needs and provide autonomous assistance by perceiving environmental context without explicit instructions. A fundamental capability of such agents is to identify and track users' upcoming events, enabling continuous and event-specific assistance. For example, by recording the time and location of a planned hike, an agent can deliver weather reminders in advance or provide navigation support before departure. However, existing works on proactive agents largely overlook event-centric assistance, and the open-ended nature of proactive assistance poses challenges for reliable evaluation. To bridge these gaps, we introduce ProEvent, the first event-centric benchmark designed to assess an agent's ability to proactively maintain a user's timetable based on ongoing instant messaging chats. ProEvent provides synthesized yet realistic chats that consider the dynamic interaction among users, concurrent chat threads, and noise in the real world, and evaluates proactive agents on response timing, single-step response correctness, and multi-step response correctness. Experiments on eight LLMs and pipelines reveal that current agents frequently overact and struggle with event cancellation. Notably, even GPT-5.1 only reacts correctly in 26.7% of scenarios. Further qualitative analysis reveals fundamental limitations of current LLMs as proactive agents, particularly in detecting implicit events and reasoning from the user's first-person perspective.

Autonomous flight in confined and cluttered environments is fundamentally limited by the restricted field of view (FoV) of onboard sensors. Passive self-rotation expands sensing coverage without additional sensors but introduces a tradeoff between swept-FoV refresh rate and flight performance. This letter presents a configuration-induced passively self-rotating tricopter for perception-enhanced autonomous flight. Firstly, the rear-arm configuration parameter is exploited to regulate the passive self-rotation operating point, providing an airframe-level mechanism for balancing swept-FoV refresh rate and flight performance. Secondly, a hierarchical autonomy framework integrating planning and control is developed to enable agile and robust autonomous flight under continuous passive self-rotation. For waypoint-based inspection, guide-point replanning is further used to improve task-level coverage. Extensive real-world experiments, including high-speed trajectory tracking, disturbance-rejection tests, and autonomous navigation in representative cluttered environments, demonstrate the effectiveness of the proposed approach for perception-enhanced autonomous flight.

Limited training data constrains deep learning models for Auditory Attention Decoding (AAD) in hearing aids (HAs). AAD uses electroencephalogram (EEG) data to decode listener's attention, enabling real-time tracking of specific sound sources. However, achieving high AAD performance with short time windows typical in HAs (<=1s) is challenging due to the scarcity of real-world speech-evoked EEG data. To address this issue, we investigate diffusion probabilistic models (DPMs) for generating synthetic speech-evoked EEG data. DPMs learn the underlying complex data structure through a denoising process and can generate realistic samples suitable for data augmentation. We evaluate the use of synthetic EEG data for augmenting datasets in locus-of-attention (LoA) classification tasks. Our experiments demonstrate that DPMs can generate realistic EEG signals and that incorporating synthetic data significantly improves AAD performance compared to models trained solely on measured EEG data (p<0.05). These results highlight the potential of diffusion-based data augmentation to mitigate training data limitations and improve the robustness of short-window AAD models in HA applications.

Accurately steering a robot to a target configuration is fundamental in engineering, yet remains challenging for nonholonomic mobile robots. Vector fields (VFs) provide a natural framework by specifying desired motion directions throughout the workspace and enabling direct integration with feedback control. However, most existing VF-based methods cannot explicitly generate trajectories satisfying curvature constraints. Actuator limits are therefore often enforced by input saturation, which may invalidate stability guarantees and degrade closed-loop performance when not considered in controller design. In addition, these methods usually ensure only asymptotic convergence without an explicit settling-time bound. To address these issues, we propose a generalized motion planning and control framework consisting of a finite-time curvature-constrained vector field (FT-C2VF) and a saturation-free control law. Depending on the motion objective, the framework drives the robot to the target configuration in finite time or through it periodically. First, the FT-C2VF is constructed using complementary gains to achieve finite-time convergence while ensuring that the curvature of its integral curves is continuous, bounded, and monotonically decreasing with the radial ratio. Second, an almost globally C1-smooth, saturation-free controller is developed to track the FT-C2VF without Jacobian information, while keeping all control inputs within prescribed actuator limits. Third, dynamical-systems analysis establishes almost-global finite-time stability of the target equilibrium. Numerical simulations show improved performance over representative VF-based methods, and outdoor experiments on an Ackermann-steered vehicle confirm the effectiveness and robustness of the proposed approach.

Autonomous flight of aerial robots in narrow space remains challenging due to strong aerodynamic disturbances and limited flying space. Existing approaches mainly address aerodynamic disturbances at the control level, while motion planning typically relies on geometric constraints and fixed speed limits, leading to conservative or unsafe behaviors in confined environments. This paper presents a disturbance-aware planning and control framework (DAPCF) that integrates online disturbance estimation into the planning-control loop for quadrotor flight in narrow space. First, the dual-loop observers estimate 6-degree-of-freedom disturbance forces and torques in real time based on odometry and motor speed measurements. Then, a disturbance risk function is introduced that adaptively modulates the reference speed of the planner based on disturbance estimation, reducing velocity when disturbances exceed a threshold and restoring it under low-disturbance conditions. Finally, a motor-dynamics-based nonlinear model predictive controller (MDNMPC) with disturbance compensation is designed to ensure robust trajectory tracking under perturbed conditions. Experiments demonstrate that a quadrotor with a diagonal length of 0.39m can traverse straight, sloped, and curved tunnels as narrow as 0.6m, outperforming human pilots in both success rate and flight efficiency.

Super-resolution can make inspection images appear sharper without preserving the evidence needed to detect a defect. We study this failure mode with a benchmark that separates reconstruction from detection and evaluates both at a predeclared low false-positive rate. Ten end-to-end repetitions combine independently generated line/space and contact-hole images with model training, calibration, clean controls, weak defects, and a held-out defect morphology. Every reconstruction is scored by the same local residual detector, while direct and jointly trained detectors form a separate comparison track. Reconstruction fidelity and inspection utility diverge: the two learned reconstruction models attain the highest structural similarity yet detect fewer defect pixels than bicubic interpolation in every paired repetition. A direct DeepLabV3 detector reaches $0.1984\pm0.0385$ recall at $0.000174\pm0.000084$ false-positive rate and satisfies the held-out feasibility criterion in all ten repetitions. An illustrative joint model, DPU-WaferSR, passes independent clean calibration but exceeds the held-out limit in all ten repetitions, demonstrating that calibration success does not guarantee transfer. Weak-defect recall remains near zero for every feasible method. Applying the unchanged policies to 4,591 public Carinthia-S masks further reveals large method-dependent shifts on real SEM texture. These results support a simple conclusion: super-resolution for inspection should be judged by preserved task evidence and operating-point transfer, not reconstruction quality alone.

This paper provides an experimentally verified formal law for calculating the uplift that diversity of thought provides in Large Language Model (LLM) ensembles. From first principles, we derive an exact decomposition of LLM ensemble lift into rescue and damage masses, which yields a compact heuristic for calculating uplift. From this we extract the metrics which predict ensemble performance: an accuracy-adjusted correctness correlation, $φ_{\mathrm{adj}}$, together with the accuracy gap and collective accuracy of the pair. We test the law on 767,520 inferences from ten open-weight models over two graduate-level science benchmarks, together with a novel agentic cybersecurity benchmark in which each model conducts digital-forensics investigations by multi-turn tool use in a network-isolated sandbox (23,520 graded trials including abstentions); all votes are released openly. Calibrated once on SuperGPQA at a 40:60 vote split, the heuristic predicts lift on the calibration set with Spearman's $ρ=0.84$ and, with its coefficients frozen, transfers to two datasets never used in calibration ($ρ=0.51$ on GPQA Diamond and $0.84$ on the forensic tasks), whilst the measured swap mass tracks realised lift with $R^2\ge 0.96$ throughout. Raw $φ$ has almost no predictive power ($R^2\le 0.09$ throughout); the accuracy-adjusted $φ_{\mathrm{adj}}$ is markedly superior ($R^2=0.67$ on SuperGPQA), and the heuristic combining these metrics is the most stable pre-pooling predictor across the three datasets.

Teleoperating a robotic manipulator in industrial environments demands precision that camera-based interfaces alone struggle to deliver. The operator must align the end-effector with a target in clutter, under limited depth perception, and without colliding with the surrounding structures. This paper presents a shared-autonomy framework that assists the operator throughout this process. A single RGB-D camera captures the operator's arm motion and hand gestures without wearables, fiducials, or a calibration stage. The intended target is specified by a free-form text prompt, grounded by a vision-language model in the robot's gripper camera, and tracked across its onboard cameras by a promptable video-segmentation model, resulting in a grasp frame continuously separated from the obstacle map. Every commanded motion is executed by a GPU-accelerated model-predictive controller that enforces self- and environment-collision avoidance against an online volumetric reconstruction, while a potential field corrects the operator's reference toward the grounded target during the final approach. An autonomous mode can be gesture-triggered to complete the grasp on the same target without a separate perception pipeline. The framework is validated on a quadruped mobile manipulator. The interface achieves a positional RMSE of 59 mm relative to motion-capture ground truth, and the controller keeps the arm at least 18 cm from obstacles while the operator deliberately commands the arm into them by 6 cm. In an industrial valve manipulation and a pick-and-place task, the full framework succeeded in all trials, while ablating either the collision or the assistance module produced failures through complementary mechanisms, and autonomous execution succeeded in four of five trials per task.

Deep neural networks trained on natural images are shown to produce outputs consistent with human observers for brightness illusions. While this phenomenon has been documented across architectures, all evidence, to date, is measured at the output level: restored pixels, decoded trajectories, or classification decisions. Whether these models actually represent illusions internally, and if so where and how, remains unknown. We show that denoising models develop illusion-sensitive representations at specific internal layers, across varied architectures. Specifically, we identify the layers and channels that discriminate illusory from physically matched control regions. We show that the denoising objective is a more important driver of the effect than the architecture. On domain-appropriate stimuli, these activations track a validated psychophysical model of human brightness perception (FLODOG; Spearman $ρ\geq 0.70$) and scale monotonically with parametric illusion strength. Leveraging these findings, we provide causal evidence via channel ablation showing that illusion-sensitive channels specifically and substantially affect the internal signal. Yet injecting these representations into the generation pipeline produces no measurable pixel shift across all tested architectures; we term such representations perceptual phantoms: active in internal processing yet invisible to any output-based evaluation. While related internal-output dissociations have been characterized in language models, this is the first such characterization for perceptual representations in denoising vision models.

Digital twins enable robots to anticipate and adapt to physical interactions, but existing models struggle with elastoplastic articulated objects (EAOs) that exhibit nonlinear elasticity, plastic yielding, and damage accumulation. We present BoxTwin, an interactive digital twin framework that learns the full dynamics of EAOs from videos. Our pipeline reconstructs the scene, identifies a physics aware constitutive model for each EAO. Experiments on manual folding and dual arm manipulation of EAOs show that BoxTwin accurately tracks joint trajectories and reproduces post contact plastic behavior over long horizons. By integrating video driven reconstruction with elastoplastic damage modeling, BoxTwin advances digital twins toward predictive, adaptive control of deformable articulated objects in unstructured environments.

Large language model agents solve tasks by generating trajectories that interleave planning, tool calls, and intermediate results. Current evaluation metrics reduce such a trajectory to a binary success flag, compare it against a reference by exact matching, or delegate judgment to another language model. A success flag cannot distinguish a sound solution from one that succeeds by luck, and says nothing about why a failed run went wrong. Exact matching penalizes plans that are valid but reordered or decomposed differently from the reference. We reframe trajectory evaluation as a distance between the agent's execution graph and a set of valid solution graphs, and instantiate it via an unbalanced fused Gromov-Wasserstein transport problem over attributed dependency graphs. The resulting score, termed OTAP (Optimal Transport for Agentic Planning), is a pseudo-metric that is provably invariant to dependency-preserving reorderings and has bounded sensitivity to redundant steps. Its unbalanced marginals handle missing or hallucinated steps without forcing a match, and its soft coupling accommodates variation in plan granularity. On controlled perturbations and three public benchmarks, OTAP separates valid from invalid trajectories in a regime where semantics-only metrics score below chance. Its advantage tracks the fidelity of the dependency graph: largest where edges follow from operator semantics, smallest where they are inferred from free text. Where a formal verifier exists, strict surface metrics predict validity better than OTAP does, which places OTAP in open-ended domains where no verifier is available.

This paper presents a safety-critical distributed nonlinear model predictive control (DNMPC) framework for cooperative payload transportation by teams of quadrupedal robots. The proposed approach models the robotic team and the shared payload as a dynamically coupled networked system with rigid holonomic coupling constraints arising from cooperative transportation. To enable distributed real-time optimization, the centralized finite-horizon optimal control problem is decomposed into parallel local NMPC subproblems coordinated through the alternating direction method of multipliers (ADMM). The resulting distributed framework enforces consensus over both payload-state and interaction-wrench trajectories while explicitly incorporating acceleration-level holonomic coupling constraints within the distributed predictive control formulation. Safety-critical obstacle avoidance constraints for both the robotic agents and payload are enforced using higher-order control barrier functions (HOCBFs). The framework is validated through numerical simulations with teams of two, three, and four quadrupedal robots transporting shared payloads in cluttered environments. Real-time experiments on two- and three-robot teams demonstrate safe and robust transportation under payload uncertainty and external disturbances. Compared with centralized NMPC, the proposed framework achieves up to 23% reduction in average NLP solve time while maintaining comparable closed-loop performance. Ablation studies further demonstrate robustness to communication delays and show that explicit payload-state consensus and holonomic constraints substantially improve payload tracking and distributed coordination over existing wrench-only consensus formulations.

Social navigation requires the robot to reason and respond in complex real-world environments. While recent works attempt to incorporate human-level intelligence into robot planning using large Vision-Language Models (VLMs), end-to-end frameworks often create an unpredictable black-box, and existing instruction-following methods are not designed for full autonomy. To bridge this gap, we present G2-Nav, a novel framework that grounds abstract social reasoning and guards safe real-world deployment. Instead of asking the VLM for direct planning decisions, G2-Nav translates its semantic reasoning into a vision-language costmap with reliability and interpretability. The VLM evaluates traversable regions and social agents from open-set perception, mapping social context into the costmap. To improve real-world robustness, the VLM performs semantic verification on upstream tracking, and we introduce a high-frequency safety check to guard against system latency prior to trajectory generation. We demonstrate through real-world experiments that G2-Nav delivers safe, efficient, and socially compliant autonomous navigation in unstructured environments. Code will be made publicly available.

Training agents that generalize to unseen, stateful environments requires a massive dataset of state-changing trajectories covering a vast and diverse set of APIs. However, scaling this broad supervision is severely bottlenecked by the immense effort required to implement and populate fully-executable environments across a broad spectrum of domains. To bypass this barrier, we introduce a data generation pipeline that decouples data synthesis from environment construction by leveraging LLMs as digital world models. Starting from only a list of broad domain names, our automated pipeline synthesizes diverse APIs and tasks. To produce trajectories, a teacher agent iteratively solves these tasks while an LLM simulator dynamically tracks state and provides coherent API responses on-the-fly. Finally, an automated judge filters the trajectories for quality. Fine-tuning on our broad synthetic dataset yields significant performance gains on AppWorld and OfficeBench, two challenging stateful benchmarks featuring environments completely unseen during training. These results establish our LLM world model-based synthesis approach as a highly scalable path for training generalizable, stateful API-calling agents.

Task arithmetic, sequential fine-tuning, activation steering, and first-order random search all operate through relatively small perturbations around an already trained checkpoint, and they rely on different local approximations: individual perturbations should be first-order predictable, task updates should compose with controlled interference, useful tangent structure should be stable and possible to estimate, and weight edits should have counterparts in representation space. We measure 8 such properties with the same harness around a multitask LoRA operating point, on 9 transformers (82M-7B), with a prospectively registered property list, thresholds, and test split. We find a shared one-direction validity window up to the tested scale $10^{-2}$, but no universal radius for pairwise composition or update ordering. Along individual directions, changes of the probe loss remain first-order predictable throughout the grid: a perturbation's effect on the loss is essentially its projection onto the gradient, which is also what makes local random search work. Pairwise structure, however, proves to be far more fragile: on over a third of the measured (model, task pair) combinations, two-update order sensitivity sets in strictly inside that window; task-gradient subspaces rotate within tens of steps; additivity under our fixed activation probe fails at full task-vector scale on several models, including both held-out 7B models; and no model median passes the registered global mean-vector weight-to-steering correspondence bar. For two sequential task-gradient steps, the leading order-dependent term is the Lie bracket $H_B\textbf{g}_A-H_A\textbf{g}_B$; its normalized prediction $c(η)=ηκ+O(η^2)$ tracks the measured defect at median ratio 1.002, while the onset scale $η^\dagger\approx0.10/κ$ spans three orders of magnitude across models and task pairs.

Autonomous rendezvous and proximity operations (RPO) in adversarial orbital environments require guidance architectures balancing target pursuit, safety preservation, and real-time adaptability under dynamically evolving interaction conditions. Although learning-based approaches show promise, their application to safety-critical orbital robotics remains limited by concerns regarding interpretability, robustness, and constraint awareness. This work presents an adaptive Model Predictive Control (MPC) framework for autonomous spacecraft RPO in multi-agent adversarial scenarios. The proposed architecture combines a constrained receding-horizon MPC formulation with a data-driven supervisory tuning layer that adjusts controller parameters from offline closed-loop evaluation and online interaction geometry. Relative motion follows Clohessy-Wiltshire (CW) dynamics, enabling computationally efficient finite-horizon prediction and real-time quadratic optimization. The MPC formulation incorporates actuator limits, predictive keep-out-zone constraints, slack-variable feasibility handling, and optional Control Barrier Function (CBF) safety filtering. Rather than generating thrust commands directly, the adaptive layer modifies interpretable MPC parameters, including tracking weights, safety penalties, minimum-separation objectives, and keep-out-zone objectives. The framework was evaluated in the official Kerbal Space Program Differential Game (KSPDG) Capture-the-Satellite environment through Monte Carlo simulations. Results demonstrate improved closed-loop robustness, adaptive maneuvering behavior, and rendezvous performance compared with fixed-parameter MPC while preserving safety-aware operation and real-time feasibility, providing a modular, interpretable foundation for adaptive spacecraft RPO.

Function-preserving network growth techniques such as Net2Net and progressive stacking expand a model's capacity without destroying its learned function, but existing formulations either tolerate numerical perturbations or require a full rebuild of the training program. We formalize Exact Network Surgery: the in-place insertion of a residual block into a live computational graph such that (i) the network function is preserved -- bit-exactly under explicit floating-point hypotheses -- and (ii) inserted parameters remain trainable immediately after insertion. We prove an identity-morphism theorem for gated residual blocks, a structural-locality theorem showing that a reactive invalidation engine recomputes exactly the downstream cone of the insertion point, leaving every other node's value and optimizer state untouched, and an escape-from-initialization proposition showing that the Gradient Shadowing gate alpha, initialized at zero over a randomly initialized branch, receives a generically non-zero gradient at insertion time. We identify a degenerate configuration -- zero-initialized output projections combined with a zero gate -- that is an exact saddle point gradient descent cannot escape. Every claim is validated on the reference implementation in NeuroDSL, a reactive graph engine in Julia: grafting is bit-exact on every logit tested (0 mismatches out of 1600); the gate escapes zero at the first optimizer step and unlocks branch gradients at the second, exactly as predicted; the degenerate configuration exhibits gradients identically zero for the entire 600-step run; surgery cost tracks downstream cone size with r = 0.9992 while graft-plus-invalidation bookkeeping is constant (about 0.75 ms) across insertion depths; and training resumes bit-identically across a real process restart. A flagged preliminary appendix reports first single-seed observations on post-insertion gate dynamics.

Affective behavior recognition in the wild requires joint prediction of continuous valence-arousal, categorical facial expression, and multi-label action units from unconstrained face images. We present our system for the Multi-Task Learning (MTL) track of the 11th Affective Behavior Analysis in-the-wild (ABAW) competition on s-Aff-Wild2, the static selected-frame version of Aff-Wild2. The method focuses on post-encoder adaptation: frozen AffectNet-supervised backbones provide multi-resolution features, while task-specific temporal heads and cross-task fusion modules select the useful signals for each target. For action-unit recognition, we adapt MAE-Face with Low-Rank Adaptation (LoRA) and use DISFA through per-unit expert routing rather than direct sequential transfer. Ablations over backbone, temporal, fusion, and AU-adaptation choices define the final configuration. The final system obtains P = 1.7302 on the official validation split, showing that post-encoder adaptation and task-wise modeling choices provide a strong MTL pipeline without training a new large-scale face foundation model.

Remote sensing offers an unparalleled vantage point for observing the Earth's long-term surface evolution, yet it demands that a model not only perceive land cover at isolated moments, but also track changes, memorize evolution histories, and reason across time and space. However, existing studies lack a systematic evaluation that dissects these distinct competencies. To fill this gap, we introduce ChronoBench, a multidimensional benchmark that decomposes this task into four progressive cognitive levels (i.e., Land Cover Perception, Temporal Recognition, Long-Term Memory, and Spatio-Temporal Reasoning). The ChronoBench comprises 12 sub-tasks and 17,689 rigorously validated QA (Question-Answer) pairs. Extensive evaluations reveal that mainstream MLLMs fall drastically behind human experts, with Long-Term Memory emerging as the most critical bottleneck. Motivated by this finding, we further propose GeoChrono, an MLLM with enhanced capabilities for tracing, memorizing, and reasoning about long-term geographic evolution. Leveraging the physical prior that geographic parcels remain spatially fixed while their semantics evolve, we design a Temporal Trajectory Encoder~(TempEnc) that constructs per-location temporal trajectories for dedicated land cover evolution modeling, and we introduce a Coarse-to-Fine Token Compressor~(C2FComp) that adaptively preserves dynamic regions while compressing the static background. To support training, we also construct ChronoInstruct, a 104K-sample instruction-tuning dataset spanning all competency levels for training. GeoChrono achieves state-of-the-art performance on ChronoBench, surpassing the leading commercial MLLMs by over 20%, while C2FComp reduces visual tokens by over 56% while retaining GeoChrono's 94.6% performance. The code and data will be available at https://github.com/IntelliSensing/GeoChrono