Infrared

The HSI-Road dataset provides paired RGB and 25-channel NIR (600--960~nm) images with binary masks but no surface-level labels.~This paper introduces a manually labeled six-class taxonomy: Background, Asphalt, Concrete, Dirt, Water, and Grass, and an RGB-to-NIR registration pipeline with corresponding annotations. Six semantic-segmentation models (SSMs) are evaluated under four input configurations: original-resolution RGB (RGB$_{\text{ori}}$), registered low-resolution RGB (RGB$_{\text{reg}}$), NIR, and channel-stacked RGB$_{\text{reg}}$--NIR (RGBN$_{\text{stk}}$). The comparison quantifies the effect of spatial-resolution reduction on RGB, along with evaluation of NIR and RGBN$_{\text{stk}}$, with results reported using per-class and mean IoU and F1 scores. RGB$_{\text{ori}}$ achieves the highest overall performance but contains 12$\times$ more pixels than the matched-resolution inputs. At the matched 192$\times$384 resolution, RGBN$_{\text{stk}}$ outperforms NIR for all six SSMs and RGB$_{\text{reg}}$ for five of six, with the most consistent gains for the Water class. These results highlight the importance of spatial resolution while showing that NIR provides complementary information to RGB.

RGB-Thermal (RGB-T) salient object detection leverages complementary cues from visible and thermal modalities to improve robustness in challenging environments. However, in real-world scenarios, the reliability of each modality is inherently unstable: RGB images degrade under low illumination, motion blur, and noise, while thermal imagery often suffers from contrast compression and sensor artifacts. Such degradation introduces unreliable perceptual evidence that can mislead cross-modal fusion and significantly deteriorate detection performance. To address this challenge, we propose RA-SOD, a reliability-aware RGB-T salient object detection framework that explicitly models modality reliability and integrates it into feature learning and cross-modal fusion. First, we introduce a reliability-conditioned representation that adaptively compensates degraded modality features while preserving structural cues. Second, an uncertainty-guided dual-stream refinement strategy progressively corrects cross-modal representations while suppressing unreliable evidence. Finally, we propose a pixel-wise modality competition mechanism that dynamically selects modality cues according to spatial reliability for fine-grained fusion. Extensive experiments on four benchmarks (VT821, VT1000, VT5000, and VT-IMAG) demonstrate that RA-SOD achieves state-of-the-art performance and exhibits strong robustness under severe modality degradation. Code and models are available at https://github.com/zaoxienian/RA-SOD.

Infrared small target detection (ISTD) is an important research direction in image processing. However, existing methods are limited by severe background noise propagation and target degradation in high-level semantic features. To address these limitations, this paper proposes a plug-and-play physics-informed cascaded asymmetric network, named PICANet. Specifically, we construct a hierarchical prior decoupling module to explicitly extract low-level and high-level physical information, thereby characterizing target features at different levels rather than relying solely on convolutional extraction. Furthermore, a dual-prior interactive fusion module is developed to dynamically refine target representations while suppressing complex background clutter. Unlike previous work, a multi-level cross-feature attention module with the cascaded asymmetric mechanism is introduced to achieve precise alignment between high-level semantics and low-level spatial details. Extensive experiments demonstrate that the proposed PICANet outperforms state-of-the-art ISTD methods, showing satisfactory detection accuracy even against complex backgrounds. Our code is available at https://github.com/xianchaoxiu/PICANet.

Text-guided image fusion has recently emerged as an effective paradigm for integrating multi-modal information while enabling flexible and task-oriented fusion control. However, existing text-guided fusion methods often rely on shallow semantic-visual interaction and limited attention mechanisms, which restrict their ability to robustly handle complex degradations and fully exploit textual guidance. In this paper, we propose an iterative text-guided image fusion framework that incorporates text-conditioned feature interaction across multiple fusion and refinement stages. The proposed method integrates deepest-level Cross-Attention, multi-scale Cross-Gate Fusion, and stage-specific text-conditioned modulation, allowing the global text embedding to condition hierarchical feature fusion and residual refinement. By repeatedly injecting the pooled text embedding across hierarchical decoder and refinement stages, the proposed framework provides degradation-aware global semantic conditioning while preserving complementary information from the visible and infrared modalities. Experiments on several benchmark datasets show that the proposed method improves several information-preservation and perceptual-quality metrics, while exhibiting metric-dependent trade-offs on some datasets.

Compact snapshot hyperspectral cameras provide rich instantaneous spectral measurements for ground-level machine vision, but at lower spatial resolution than standard RGB cameras. RGB-guided hyperspectral super-resolution (HSR) addresses this limitation by transferring spatial detail from a high-resolution RGB guide to a low-resolution hyperspectral image (HSI). These dual-camera systems are typically in a horizontal rig geometry, requiring cross-camera image alignment due to different fields of view. However, residual misregistration can inject spurious high-frequency details. Existing learned unaligned-fusion methods are usually trained for a fixed spectral support and spatial scale factors and can be computationally demanding, limiting their flexibility across sensors. We propose a lightweight and interpretable RGB-guided HSR framework combining cross-modal flow alignment with model-based Gram-Schmidt orthogonalization fusion. The method first warps the RGB guide onto the HSI grid, then estimates an energy-based confidence weight map by measuring local alignment reliability. This map is then used both in a weighted least-squares spectral regression and in a gated fusion between the super-resolved estimate and an HSI-preserving estimate. Unlike existing learned methods, the proposed framework has a low computational footprint and supports VIS-NIR spectral supports and scale factors without retraining. Experiments on the Real benchmark show that the proposed method improves reconstruction accuracy over learned fusion baselines while remaining substantially faster. On a 34-frame sequence acquired with our real RGB-HSI dual-camera setup, a reduced-resolution quantitative evaluation validates the method under genuine cross-sensor radiometric, noise, and geometric differences, while native-resolution qualitative results demonstrate deployment on the full 51-band VIS-NIR acquisition.

InfRared Small Target Detection (IRSTD) is a challenging task. Relying solely on pixel-level information, vision-only methods struggle to distinguish targets from clutter. Current multimodal methods typically describe both targets and backgrounds with a single textual prompt. Such an approach lacks dedicated regional guidance and ignores infrared semantic asymmetry. Consequently, it provides insufficient background suppression information and introduces severe feature optimization conflicts, overwhelming small targets with noise. To address these issues, we propose a novel Asymmetric Dual-text Guided Network (ADGNet). Specifically, accounting for the infrared semantic asymmetry, we first design the Asymmetric Dual-text Prompt (ADP), comprising an image-agnostic abstract target prompt and an image-specific detailed background prompt. To leverage these prompts, we introduce an Asymmetric Dual-Branch Interaction (ADBI) module to separately guide visual features with their respective text priors, protecting targets from noise while suppressing background clutter. Subsequently, we introduce an Adaptive Feature Aggregation (AFA) module to dynamically fuse features from the two branches. Furthermore, we construct a multimodal Asymmetric Image-Text Infrared (AITIR) dataset by providing asymmetric text annotations for three public datasets (IRSTD-1K, NUDT-SIRST, and SIRST). Extensive experiments demonstrate that ADGNet outperforms 21 state-of-the-art (SOTA) methods. Code is available at https://github.com/iLearn-Lab/MM26-ADGNet.

Infrared (IR) spectroscopy is widely used for chemical sensing, but extracting reliable chemical information from spectra remains challenging. Conventional interpretation is labor-intensive, relies on prior knowledge and reference spectra, and is difficult to scale, whereas most machine-learning methods are tailored to individual tasks or datasets, require large labeled training sets, and transfer poorly across analytical objectives and experimental datasets. Here we introduce UltraIR, a foundation model for IR spectroscopy with more than 100 million parameters that enables simulation-to-real transfer learning for chemical sensing and analysis from molecules to complex samples. UltraIR is pretrained on approximately 60 million simulated IR spectra using spectral reconstruction, molecular fingerprint similarity alignment, and functional-group prediction, then adapted to downstream objectives with task-specific labels or targets. Across functional-group prediction, molecular structure elucidation, physicochemical property prediction, mixture-component identification and quantification, bacterial classification, medicinal-herb geographic origin traceability and constituent quantification, microplastics classification, and soil property prediction, UltraIR outperforms conventional machine-learning and task-specific deep-learning baselines. It performs strongly with limited labeled experimental spectra and in zero-shot inference for the same analytical task across Fourier-transform infrared spectrometers and laboratories, providing a route to adaptable, data-efficient chemical sensing from complex real-world samples.

Joint use of RGB and infrared (IR) imagery can improve UAV-view object detection, but most existing methods fuse multimodal features with static or fixed weights and therefore overlook spatially varying modality reliability. We propose EGM-Det, an entropy-guided multimodal adaptive fusion framework for RGB-IR object detection. EGM-Det employs a dual-stream architecture to preserve modality-specific representations and introduces an Entropy Offset Gate Fusion module for adaptive multi-scale fusion. The module derives shallow entropy priors from input intensity, local entropy, and cross-modal discrepancy, and uses them to guide local offset alignment and spatial-channel gated fusion. It therefore selectively aggregates reliable RGB and infrared cues instead of uniformly combining heterogeneous features. We further introduce cross-modal distillation to regularize the learned fusion gates and reduce fusion degradation. Each student branch extracts complementary knowledge from the cross-modality teacher branch matched to the main branch, while entropy-adaptive supervision emphasizes uncertain modality decisions. Experiments on DroneVehicle, LLVIP, and VEDAI demonstrate state-of-the-art performance across all three benchmarks; in particular, EGM-Det outperforms prior approaches by more than 10 percentage points on VEDAI.

Unmanned aerial vehicle (UAV) infrared image super-resolution aims to recover weak thermal structures for deployment on resource-constrained platforms; lightweight models are therefore preferred, but multi-loss training can be unstable. A common strategy combines pixel-domain and frequency-domain objectives; however, low contrast, limited high-frequency content, and sensor-specific noise often make their gradients weakly aligned or conflicting. To address this optimization ambiguity, we propose Orthogonal Gradient Gaming and Frequency Rectification (OGG-FR), a plug-and-play optimization framework that decomposes the frequency gradient into a redundant parallel component and an orthogonal innovation component relative to the pixel gradient. In the conflict regime, OGG-FR computes a safe base gradient using the Multiple Gradient Descent Algorithm (MGDA) and adds a variance-rectified orthogonal innovation; in the compatible regime, it discards redundant parallel information and injects the orthogonal innovation according to a confidence score estimated from the high-frequency residual. Experimental results on the UAV thermal benchmark show broad gains under BI and BD degradations at $\times 4$ and $\times 8$ scales, while gradient analyses support the effectiveness of the proposed conflict-aware update rule.

General-purpose multimodal large language models (MLLMs) are increasingly applied to infrared images, where they are commonly scored by answer accuracy alone. However, a correct answer does not ensure that the model's explanation is grounded in infrared thermal evidence. We introduce an explanation-aware evaluation framework that separates answer correctness, output-level explanation groundedness, and thermal grounding for infrared visual questions. Using a Dual-LLM Consensus Judge with a preliminary human-anchor calibration check, we find that correct answers can still rely on weak or visible-light evidence; withholding the original infrared image and showing only a visible-like rendering erodes thermal grounding with little accuracy change; and this erosion is observed most strongly for more capable models but disappears when infrared remains available. We further propose Thermal-Grounded Feedback (TGF), a training-free feedback loop that diagnoses explanation-side failures and revises the explanation while preserving the selected answer. On local paired-input validation, TGF improves explanation-side grounding without changing answers. These findings suggest that future trustworthy MLLMs for infrared scene understanding should be evaluated and developed to produce thermally grounded explanations rather than merely accurate answers.

Visible-to-infrared image translation provides a practical way to expand infrared training data using abundant visible images. Diffusion models are promising for this task because of their strong generative performance. However, existing diffusion-based methods typically use semantic priors only as external conditions, without explicitly regulating token interactions within the denoising network. Consequently, they struggle to preserve object locations, shapes, and semantic layouts required for reliable annotation reuse. We propose SC-Diff, a semantically calibrated latent diffusion framework that uses semantic priors for both conditional guidance and internal self-attention calibration. A pretrained SAM3 model with predefined text prompts first extracts category-specific semantic masks from visible images. These masks are merged into a semantic map and fused with the visible image as the input condition. The same map is converted into token-level semantic labels to calibrate self-attention in the denoising network. Based on these labels, we introduce Semantic-Guided Self-Attention Calibration (SGSC), which adaptively applies positive biases to query-key pairs of the same category. The query-wise calibration strength depends on the dispersion of attention across semantic categories and the attention assigned to the query's own category. The original attention scores further modulate the bias, giving greater calibration to same-category keys with stronger responses. This soft calibration reduces cross-category interference while retaining global contextual interactions, thereby improving semantic consistency in generated infrared images. Extensive experiments show that SC-Diff improves perceptual quality and produces more effective synthetic training data for downstream infrared object detection.

Robust perception under low-visibility conditions requires fused imagery that jointly preserves infrared thermal saliency and polarization-derived structural details. However, existing infrared-polarization image fusion (IPIF) methods often overemphasize dominant infrared responses, causing weak yet informative polarization textures in dark regions to be suppressed. To address this issue, we propose IRPol-Fuse, an energy-structure coordinated IPIF framework for challenging low-visibility scenarios. The proposed framework contains three key modules: Polarization Attention Fusion for adaptive infrared-polarization allocation, Infrared Highlight Injector for highlight-guided infrared preservation, and Polarization Texture Injector for polarization texture restoration and fine-detail recovery. We further construct LI-PI, a dedicated infrared-polarization evaluation dataset for low-visibility and visually concealed scenes. Experiments on LI-PI and the public LDDRS dataset demonstrate that IRPol-Fuse achieves favorable performance in thermal target preservation, structural detail recovery, and visual naturalness. Region-aware evaluation and downstream object detection further verify that the proposed energy-structure coordination strategy effectively preserves both infrared target saliency and polarization-derived structural information. Code is available at https://github.com/1hzf/IRPolar-Fuse .

Infrared small target detection (IRSTD) has achieved substantial progress under domain-consistent evaluation, yet detector performance often degrades markedly when generalizing to unseen infrared domains. Existing methods primarily improve detection by enhancing target responses and suppressing background interference. However, when trained on only a limited set of source domains, their learned decision rules are inevitably established from a restricted range of source-domain target-background relation patterns. We formulate this cross-domain failure as target-background relation shift: unseen domains may exhibit relation patterns that are not observed during training, thereby weakening the discriminative capability learned from the source domains. To address this problem, we propose HyTBE, a Hyperbolic Target-Background Expert model that expands source-domain relation patterns and adaptively adjusts visual representations using explicit relation cues. The Target-Background Relation Intervention selectively perturbs either targets or backgrounds, broadening the observable relation patterns during training while maintaining valid supervision. Subsequently, the Hyperbolic Relation Modeling maps multi-scale visual cues into a Poincaré ball and characterizes the target-background relation of each feature token according to its relative distances to the target and background anchors. The Hyperbolic-guided MoE Adapter further uses these hyperbolic relation representations to calibrate multi-scale visual features and aggregate expert-specific feature corrections for different relation patterns. Leave-one-domain-out experiments on NUAA-SIRST, NUDT-SIRST, and IRSTD-1K demonstrate that HyTBE achieves stronger cross-domain generalization than competitive baselines.

RGB-infrared (RGB-IR) object detection benefits from complementary visible and thermal cues, but effective fusion remains challenging under illumination changes, weather variation, and cluttered scenes. Existing RGB-IR fusion methods often trade expressive patch-level interaction for lighter but more constrained adaptation mechanisms. We empirically observe that pretrained register tokens contain both modality-shared and modality-specific information on paired RGB-IR inputs, suggesting that they can serve as a compact substrate for cross-modal communication. Building on this observation, we propose RegisterBridgeMM, a register-mediated fusion framework organized as a three-stage register lifecycle. Aggregate preserves per-modality register summarization inherited from pretraining; Bridge performs bidirectional register-to-patch reading with consensus-residual regulation; and Project translates the resulting register summary into spatially adaptive calibration of patch features. This register pathway avoids dense patch-to-patch cross-modal interaction while preserving the pretrained patch representation. With both backbone streams frozen, RegisterBridgeMM achieves the highest mAP50-95 among the evaluated methods on all four benchmarks: LLVIP, M3FD, DroneVehicle, and FLIR-Aligned.

Infrared image super-resolution (IISR) is important for downstream tasks such as object detection and semantic segmentation. Existing IISR methods often produce artificial textures, over-sharpened edges, and spurious high-frequency details that distort authentic thermal structures and semantic information. To address this issue, we propose FaithIR, a faithful infrared super-resolution framework for reliable machine perception. FaithIR consists of a patch-level conditioning branch that captures global thermal and structural information and a pixel-level restoration branch that performs dense local reconstruction under structural guidance. The entire restoration process is performed directly in the pixel domain to preserve infrared-specific structures and task-relevant information. Extensive experiments on FLIR-IISR, M3FD, and FMB demonstrate strong reconstruction fidelity, cross-dataset generalization, and superior performance in object detection and semantic segmentation. These results show that demonstrate that preserving faithful infrared structure preservations is more important for reliable machine perception than merely pursuing perceptual sharpness alone.

Functional near-infrared spectroscopy (fNIRS) is a promising modality for autism spectrum disorder (ASD) classification, yet existing approaches assume temporally aligned evaluation. In practice, the optimal observation window varies across subjects due to differences in hemodynamic delay and neurovascular coupling, creating a temporal distribution shift that degrades performance. We formalize this as a \textit{cross-time-window transfer problem}, introducing a protocol that varies window length (2.5--10,s) and offset within biological motion trials. Using topographic map representations of fNIRS recordings, we benchmark three vision architectures under two zero-shot baselines and eight adaptation strategies under leave-one-subject-out cross-validation ($N{=}124$). Key findings: (1) zero-shot cross-window accuracy is near chance (54--69%); (2) ${\approx}5\%$ subject-specific fine-tuning recovers 90--96%, while a subject-specific upper bound reaches 97--100%, identifying inter-subject variability as the dominant barrier; (3) domain-adversarial and self-supervised strategies achieve 78--90% without target-subject data; and (4) discriminative information is recoverable from windows as short as 2.5,s. These findings provide a practical roadmap for deploying fNIRS-based ASD classifiers under realistic temporal variability.

Thermal imaging remains effective under adverse illumination, yet passive long-wave infrared (LWIR) measurements often lack fine texture. Existing thermal texture imaging approaches commonly rely on spectral sensing or registered auxiliary modalities, incurring substantial data throughput or vulnerability to cross-modal degradation. We introduce T$^2$exture, a sparsely perturbed thermal texture imaging framework that aims to reconstruct temporally dense thermal texture sequences from densely sampled passive frames and a few actively perturbed keyframes. We define thermal texture as the residual between a source-on observation and its corresponding source-off passive state. Under sparse LWIR illumination and rapid quasi-steady paired acquisition, this residual attenuates the passive-emission background and approximates a source-induced reflected response, exposing localized material- and geometry-dependent texture. T$^2$exture reconstructs a dense sequence of this source-conditioned response through two stages. Stage 1 estimates the unobserved source-off passive state at each active instant from neighboring passive frames to obtain reliable differential texture anchors. Stage 2 combines sparse anchors with passive structural context near each target time to reconstruct the dense sequence. On the simulated benchmark, T$^2$exture adds only 0.20M parameters to AMT-L while improving PSNR by 6.66 dB. Extensive evaluations on simulated and real acquisitions further show clearer texture recovery and stronger structural preservation than representative VFI baselines. These results establish T$^2$exture as a practical framework for thermal texture imaging under sparse active acquisition.

Robust low-light imaging remains challenging for the community. Recent studies have explored fusing Near-Infrared (NIR) with noisy RGB to achieve improved enhancement, yet most methods depend on carefully curated training data pairs, with limited robustness under different scenarios. This paper offers a new perspective for RGB-NIR low-light imaging by incorporating 3D-aware neural modeling. Without using clean RGB supervision, a powerful model can be optimized to implicitly fuse extremely noisy RGB observations with NIR cues in 3D space, effectively recovering clean RGB images. The proposed model obviates the requirement for clean RGB data collection, generalizes across different noise levels. Extensive evaluations on synthetic and real data demonstrate its superiority. Codes available: https://github.com/MyNiuuu/3DarkFusion

Inferring molecular structures from infrared (IR) spectra is a fundamental yet challenging problem. A key difficulty is that an IR spectrum provides limited structural information: different molecules may share similar functional groups and local vibrational patterns, leading to highly similar spectral responses. Thus, even when an observed spectrum has a unique underlying structure, reconstructing it from the spectrum remains ambiguous. Existing IR-to-molecule models usually generate a ranked set of candidate molecules, but this set is largely determined by the model's learned generation preference and may not fully capture the structures that best satisfy the observed spectral constraints. To address this limitation, we propose SpecCal, a training-free candidate calibration framework for IR-to-molecule prediction. SpecCal operates on the candidate outputs of existing base models and improves the prediction set by re-ranking current candidates while introducing additional structurally plausible alternatives guided by spectral consistency. The framework is plug-and-play and model-agnostic, requiring no parameter updates for integration with diverse base models. Experiments on multiple benchmarks show that SpecCal consistently improves top-k reconstruction at both SMILES and scaffold levels across different base models. Further analyses demonstrate that calibrating candidate sets under spectral ambiguity provides a practical way to improve molecular reconstruction from IR spectra. The code is available at: https://anonymous.4open.science/r/SpecCal-B18A.

Wavelength selection is one of the important preprocessing methods in near-infrared spectroscopy to improve prediction accuracy and interpretability of spectral data. We formulate wavelength-region selection for sugar content estimation as a binary black-box optimization problem and propose a method based on Bayesian optimization. The proposed method constructs a sparse quadratic surrogate model and sequentially extracts interested wavelength regions by Thompson sampling. Minimizing an acquisition function is performed as a quadratic unconstrained binary optimization problem by simulated or quantum annealing. Experiments show that the proposed method improves the prediction accuracy of partial least squares regression and yields more consistent wavelength regions than genetic-algorithm-based selection and simulated annealing. Under one-bit local perturbations, the selected wavelength regions show minimal fluctuations in root mean square errors between observed and predicted values of a validation set. This local stability suggests that our method converges to a smoother error landscape and avoids isolated overfitted solutions. These results indicate that combinatorial Bayesian optimization is a useful framework for robust feature selection in spectroscopic prediction tasks.

With the promising performance of deep neural networks on image-based tasks, different real-world applications such as autonomous driving and motion detection have become increasingly mature and relevant to human lives. In particular, Optical Flow Estimation Networks (OFENs), as upstream models, play a critical role in different domains. Its outputs are heavily assumed and adopted for different downstream tasks, and it is essential to test its robustness to prevent safety accidents. We present an approach for real-time attacks on OFENs in the physical world, leveraging infrared lights for their stealthiness. By generating a large number of Adversarial Examples in advance, our approach computes AEs in real time and dynamically displays them, which allows our method to facilitate precise and targeted attacks without modifying the victim system. Unlike previous digital-to-physical attack techniques, our method directly attacks victim models within the physical world, thereby overcoming the limitations associated with the ineffectiveness of AEs. Experimental results demonstrate the efficacy of our approach in compromising OFENs across diverse lighting conditions, varying object motion velocities, and different object placements, ultimately impairing the network's ability to accurately estimate optical flow.

Automated molecular structure elucidation from infrared (IR) spectroscopy data has seen significant advancements in recent years, but its broad applicability is limited by a reliance on pre-determined chemical formulas provided as auxiliary model inputs. This limits model predictions to isomer identification rather than full molecular structure prediction. Although transformer models have been shown to identify molecular isomers with high accuracy, their reliability for unconstrained structure elucidation is comparatively low and poorly understood. In this work, we propose and evaluate key modifications to the traditional encoder-decoder transformer. To better address the vast chemical space of the unconstrained problem, we implement a novel Mixture-of-Experts (MoE) decoder module that utilizes non-additive aggregation via linear-order statistics and the Choquet integral. We further modify the transformer to utilize these non-additive operators when aggregating spectral representations as well. Together with an auxiliary contrastive alignment loss term, these enhancements improve Top-K prediction accuracy by over 10 percentage points compared to baseline IR-only models. Through sub-structure fragment analysis of molecular predictions, we further confirm that infrared spectra encode the vast majority of relevant chemical information, implying that the higher performance of isomer-ranking models is largely due to underrepresented or overlapping absorption bands for molecules in the explored chemical space. Ultimately, by demonstrating the efficacy of automated molecular structure elucidation from measured IR spectra, this work serves to significantly broaden the utility of AI in analytical chemistry.

Convolutional neural networks (CNN) for near-infrared (NIR) chemometrics are often designed using generic architectural rules, although spectral datasets differ in sampling, smoothness, redundancy, and sample size. We tested whether these properties can provide empirical priors for CNN design. Across 25 NIR regression tasks, we computed descriptors of dataset size, spectral length and spacing, entropy, intrinsic rank, autocorrelation, and wavelet-scale structure. Two interpretable 1D-CNN scaffolds (a minimal single-convolution model and an extended shallow model with optional branching, dilation, etc) were optimized using five-fold cross-validated Bayesian hyperparameter optimization (HPO). Relationships extracted from near-optimal trials were converted into warm-start heuristics and evaluated directly and through leave-one-dataset-out (LODO) validation. The clearest relationships involved convolutional receptive fields. In the minimal CNN, the preferred kernel fraction decreased with spectral entropy and intrinsic rank, increased with the wavelet energy-support fraction, and the learning rate tended to decrease with training-set size. Direct and LODO heuristics were competitive with HPO, with median test-RMSE ratios of 0.953 and 1.017, respectively. The extended CNN showed similar but less transferable structure across branch usage, dilation, dropout, filter counts, and receptive-field choices. Ten stochastic refits showed seed sensitivity comparable to that of HPO-selected configurations. In a separate experiment, joint preprocessing and CNN HPO outperformed standardized-spectra HPO in 19 of 25 tasks, although gains were dataset-dependent. These results show that spectral descriptors can provide practical CNN design priors, guiding shallow NIR models toward plausible hyperparameter regions before target-specific tuning

Background. Pediatric musculoskeletal trauma represents up to 18% of pediatric ED visits, yet diagnosis still depends on ionizing radiography. Cumulative low-dose radiation in early life raises lifetime leukemia and brain malignancy risk, motivating radiation-free triage alternatives. Objective. To synthesize evidence for a hybrid framework coupling broad-spectrum infrared (IR) imaging with deep-learning cross-modal translation to generate clinically interpretable synthetic-radiograph reconstructions from non-ionizing data. Approach. We review five IR spectral windows spanning 650 nm to 1 mm - NIR-I, NIR-II, SWIR, MIR/LWIR, and THz - and how dual-geometry (transmission/reflection) acquisition exploits wavelength-specific tissue depth and biochemical sensitivity. We summarize image-to-image translation networks (Pix2Pix, CycleGAN, Swin-Unet) and feature-matching algorithms (SuperPoint, SuperGlue, ALIKED, LightGlue) used to align and fuse IR data into radiograph-equivalent reconstructions. Implications. Pediatric anatomy - smaller cross-sections, thinner cortical bone - favors IR penetration, enabling compact, portable, non-ionizing triage hardware. Feasibility is grounded in fNIRS and transcranial photobiomodulation evidence: near-infrared light passes through skin, skull, and cortex with sufficient signal for hemodynamic monitoring - a longer, more attenuating path than through a pediatric forearm or distal leg. Key barriers: paired IR/X-ray dataset construction, AI-as-medical-device regulatory pathways, generalization across body habitus and skin pigmentation, and acquisition-protocol standardization. Conclusions. Integrated multi-spectral IR+AI imaging is a promising radiation-free complement to pediatric skeletal radiography. Progress requires multi-center paired datasets, externally validated models, and IR source safety qualification under IEC 60825-1.

Infrared small target detection (IRSTD) is important for low-altitude perception, unmanned-system warning, and security monitoring. However, weak targets in infrared imagery usually occupy only a few pixels and are easily submerged by cloud clutter, ground edges, and bright noise, making it difficult for lightweight segmentation-based methods to preserve local target structures while suppressing background interference. To address these challenges, we propose LCMamNet, a lightweight cross-scale Mamba network that progressively enhances local target structures, interacts cross-scale context in a latent space, and restores spatial details with background suppression. Specifically, a compact hierarchical encoder with cross-shaped directional bottleneck residual (CDBR) blocks strengthens direction-sensitive target structures under a small computation budget. A latent dense cross-scale fusion (LDCF) module then performs dense all-level interaction through bidirectional Mamba modeling and reorganizes the interacted features into stable hierarchical semantics. Finally, a progressive decoder selectively recovers shallow spatial details while suppressing irrelevant background textures. Extensive experiments on IRSTD-1k, NUAA-SIRST, and NUDT-SIRST show that the proposed network achieves mIoU scores of 71.25%, 79.60%, and 95.58%, respectively, with only 1.175M parameters and 6.91 GFLOPs. It also runs with a mean inference latency of 6.62 ms, and deployment results on an NVIDIA Jetson Orin NX 16G SUPER further demonstrate its practical potential for real-time edge inference. The code and checkpoints are publicly available at https://github.com/Haoyu096/LCMamNet.

Mobile infrared-visible imaging typically pairs a compact infrared sensor with a high-resolution visible camera for complementary perception. While cross-sensor misalignment caused by different optics, viewpoints, fields of view, and exposure timings hinders practical deployment. In this paper, we propose BeyondFusion, a unified latent diffusion framework for calibration-free visible-guided infrared super-resolution and infrared-visible fusion tasks. The proposed framework supports both task-specific training and joint training where two tasks are optimized and executed as two readouts of the same generative process. Instead of relying on explicit registration or geometric warping, BeyondFusion introduces a cross-modal self-aligning (CMSA) module into the denoising U-Net. CMSA reorganizes infrared and visible latent tokens into a shared attention space to learn content-adaptive cross-modal correspondence during the denoising process. Together with misalignment augmentation module, the model is facilitated to exploit visible structural and semantic cues while preserving thermal consistency, enabling high-frequency infrared reconstruction and informative fused-image generation under uncalibrated conditions. Extensive experiments on public benchmarks and a mobile infrared-visible imaging system show strong performance across aligned inputs, low-resolution infrared observations, synthetic misalignments, and real mobile captures with unsynchronized sensors. Ablation studies, unified training analysis, and downstream pedestrian detection further validate the effectiveness of BeyondFusion for calibration-free multimodal imaging.

Controllable infrared-visible image fusion aims to integrate complementary thermal and structural information with flexible region-aware modulation, producing fused images that adapt to diverse user requirements and downstream tasks. However, existing methods typically rely on predefined discrete control conditions, leading to a sparse space that fails to support fine-grained modulation demands. To address this, we propose ConFusion, a novel framework that learns the continuous fusion space via Gaussian-conditioned spatial-aware modulation, enabling instance-level fine-grained controllable infrared and visible image fusion. ConFusion employs a dual-branch architecture to disentangle modality-invariant and modality-specific representations under joint reconstruction and text-guided semantic alignment. Gaussian-conditioned instance modulation variables coupled with Grounded SAM-based instance masks guide instance-level fine-grained modulation through the Mask-Guided Specific Feature Modulator, while the Text-Driven Invariant Feature Enhancer improves semantic consistency and enhances fusion. During inference, the multimodal large language model parses user intents into instance-level modulation variables to guide image fusion. Extensive experiments show that ConFusion achieves state-of-the-art performance across multiple metrics in both fusion quality and downstream tasks, while supporting fine-grained controllable image fusion. Our code is available at https://github.com/HeyufeiAnto/Confusion

Deep learning-based visual-infrared fused face detection models are increasingly deployed across a wide range of applications, yet they remain susceptible to adversarial patch attacks. Most prior attacks target either the visual or the infrared image alone in the digital domain, which renders them ineffective against fused models in the physical world. Moreover, many of these methods are readily noticeable, as their patch patterns deviate substantially from those seen in the real world. In this paper, we introduce VIPatch (Visual-Infrared Patch), a novel physical adversarial patch attack that produces inconspicuous, realistic, and natural-looking patches for facial images. Specifically, VIPatch crafts a gradient-color mask together with a band-aid sticker across both the visual and infrared images, and jointly optimizes these two elements; the resulting digital patches further guide the fabrication of their physical counterparts. Experimental results show that VIPatch achieves competitive attack success rates (over 90%) in both the digital and physical domains, while keeping the patches unobtrusive to human observers.

Efficient processing is becoming increasingly important in infrared remote sensing, where satellite constellations produce large volumes of observations under constrained detector resolution, power, and downlink bandwidth. Multi-frame super-resolution (MFSR) offers a software-based route to spatial enhancement, but its evaluation in infrared sensing remains fragmented across private datasets and ad-hoc protocols. Existing benchmarks do not explicitly capture the thermal contrast, sensor noise, weak texture, and platform-induced frame-to-frame variation that characterize infrared video. We introduce IR275K, a curated benchmark containing 594 infrared video sequences and 275,196 frames. It provides sequence-level train/validation/test splits and a reproducible X4 evaluation protocol. As an initial architectural probe, we further evaluate CGMamba, a lightweight state-space model with 10.90M parameters and 112.14G FLOPs. CGMamba combines 2D rotary position encoding (2DRoPE) with center-guided cross-Mamba (CGCM) fusion for implicit multi-frame reconstruction. It achieves 33.19dB PSNR, outperforming infrared single-image super-resolution references by 0.35--0.52dB at substantially lower computational cost. Ablation results show that removing 2D~RoPE from CGCM causes a 1.53dB drop and severe grid-like artifacts. This indicates that explicit spatial anchoring is critical for stabilizing SSM-based cross-frame gating under infrared conditions. IR275K provides a reproducible foundation for accuracy--efficiency evaluation of infrared MFSR methods, while the architectural analysis offers a concrete starting point for spatially aware SSM design under resource-constrained infrared sensing. Dataset and evaluation resources are available at: https://github.com/InfraRecon7/IR275K.

Virtual reality (VR) headsets (e.g., Meta Quest, Apple Vision Pro) provide a seamless user experience due to their fast, frictionless interaction with the physical world in a simulated environment. User authentication relies on biometric cues such as iris in such headsets. However, traditional iris recognition protocols may not be adequate in cases of unconstrained acquisition, which is typical of VR-based data. In this work, we examine three crucial aspects: (1) evaluating ISO/IEC 29794-6 iris quality metrics on VRBiom dataset and analyzing their limitations, (2) addressing data-specific challenges such as off-axis gaze, non-uniform illumination, and specular reflection using generative models, and (3) performing unimodal (iris, periocular) recognition and multimodal score-level fusion (iris + periocular). We observe that some metrics (e.g., margin adequacy) fail on VR-acquired data; whereas, image adjustments primarily benefit periocular recognition, and multimodal fusion lowers EER by ~11% over unimodal iris recognition performance. We will release the evaluation scripts upon acceptance for reproducibility.

Visible-infrared (VIS-IR) alignment is a key pre-training task for robust multi-sensor perception. Most existing methods use uniform patch-wise contrastive learning, but this can be unreliable in VIS-IR data because imaging-physics differences make some spatially paired regions inherently less comparable, and aligning them with equal strength hinders representation learning and downstream transfer. In this paper, we revisit VIS-IR pre-training from a sampling perspective and propose Importance-Aware Sampling (IAS), which adjusts training emphasis based on patch reliability. Specifically, IAS (i) derives patch weights from infrared structural cues and uses them to reweight the contrastive objective; (ii) learns a soft importance mask with a lightweight sampler, optionally warm-started from the hand-crafted prior; and (iii) employs a patch curriculum learning strategy that gradually expands from high-reliability regions to harder patches. It is worth noting that IAS is plug-and-play and works with both patch-/correlation-level alignment (e.g., UNIV-style) and image-level contrastive baselines (e.g., ImageBind-style). Extensive experiments on multiple VIS-IR benchmarks demonstrate consistent improvements over strong baselines, including for IR semantic segmentation, IR object detection and VIS semantic segmentation and cross-modal retrieval task. Code will be released on https://github.com/KlayMa527/IAS.

Infrared and visible image fusion (IVIF) integrates the complementary information of two modalities into a single image with richer scene content. While existing methods are largely built on artificial neural networks (ANNs), which densely compute over all activations, spiking neural networks (SNNs) communicate through sparse binary spikes and compute only where and when a spike occurs, offering a route to more energy-efficient fusion. However, directly applying SNNs to IVIF creates a fundamental tension: cross-modal fusion relies on fine-grained responses from both modalities, whereas binary spikes can discard complementary cues that remain below the firing threshold. The membrane potential retains these subthreshold responses before firing, letting both modalities jointly shape the output when integrated at this stage. Building on this, we propose CIS-Fuse, a spiking network that performs cross-modal fusion directly at the membrane-potential level. At its core is the current injection spiking (CIS) operator, which injects one modality as a gated auxiliary current into the driving neuron of the other, so the two integrate before spike firing, with a per-channel learnable injection strength that adaptively regulates the modulation magnitude. Building on CIS, we construct a bidirectional cross-modal fusion (BCMF) module and deploy it on a dual-branch architecture with asymmetric stacking depths, where the two branches develop a clear functional specialization. Extensive experiments on four IVIF benchmarks and on downstream detection and segmentation show that CIS-Fuse achieves fusion quality on par with state-of-the-art ANN-based methods while inheriting the energy efficiency of spike-based computation, with roughly an order of magnitude lower inference energy than the similarly-sized ANN-based DCEvo. Code will be released upon publication.

Pain is a complex and pervasive phenomenon affecting a large percentage of the population, and accurate assessment is essential for effective clinical management and intervention. Computational pain recognition systems enable continuous monitoring, support clinical decision-making, and help mitigate pain-related distress and functional decline. This study introduces a unified tokenization framework for heterogeneous 3D modalities in pain recognition that provides a single processing pipeline across behavioral and brain-activity 3D data, without requiring separate architectures for each modality or handcrafted inductive biases. The framework preserves spatial, temporal, and time--frequency structure while mapping diverse inputs into a shared token space. Extensive experiments show that the proposed approach effectively processes facial videos and fNIRS data in both raw-signal and spectrogram-based representations. On the AI4Pain benchmark dataset, the proposed framework achieves state-of-the-art performance while maintaining high computational efficiency and enabling real-time assessment on both GPU and CPU hardware.

Human-in-the-loop Reinforcement Learning has become a popular approach to training, finetuning, and aligning robot behavior with user preferences. Our paper explores the feasibility of using brain signals via functional near-infrared spectroscopy (fNIRS) to modulate robot learning in simulation. We compare agents trained on passive (observational) versus active (demonstrative) interaction tasks, and test multiple methods for enhancing the RL algorithm with the neural signal, focusing on parameter augmentation rather than replacement. We further examine how model granularity and noise affect agent learning. Our results show that this framework is effective: the neural signal improves learning when augmenting trajectory priorities and state-action q-values. Additionally, the framework learns successfully from offline data, offering a practical alternative for settings where real-time BCI setups are impractical or only limited data is available.

Point tracking in surgery is crucial to enable applications in downstream tasks such as segmentation, 3D reconstruction, virtual tissue landmarking, autonomous probe-based scanning, and subtask autonomy. This paper introduces the 2025 iteration of a point tracking challenge to address this, wherein participants submit their algorithms for quantification. Their algorithms are evaluated using a dataset named surgical tattoos in infrared (STIR), with the challenge named the STIR Challenge 2025 (STIRC2025). The STIR Challenge 2025 comprises two quantitative components: accuracy and efficiency. The accuracy component tests the accuracy of algorithms on in vivo and ex vivo sequences. The efficiency component tests algorithm inference latency. The challenge was conducted as a part of MICCAI EndoVis 2025, and seven teams participated in this challenge. In this paper we summarize the challenge results and participant methods. The challenge dataset is available at: https://zenodo.org/records/20191078, and the code for baseline models and metrics calculation is available here: https://github.com/athaddius/STIRMetrics

Distributed swarms typically rely on either active wireless communication or passive vision, and they are frequently hindered by bandwidth constraints or environmental sensitivity. This paper proposes Infra-Swarm, a robust vision-based swarm. Each robot is equipped with a near-infrared light source and four ordinary gray-scale cameras. The Infra-Swarm system directly measures the centimeter-level 3D position of neighbors based on the position (bearing) and intensity (strength) of optical flares in the captured images. By utilizing 940 nm narrow-band filters to physically reject 99.2% of ambient light interference, the perception front-end achieves hardware-level robustness against illumination variations. Furthermore, its minimal computational overhead provides a resilient foundation for the massive scalability of robotic collectives on resource-constrained hardware.

While visual navigation has been extensively studied in agricultural robotics, most existing systems assume daytime conditions. In fact, deploying autonomous robots at night offers significant advantages, including 24-hour crop and soil monitoring, fruit harvesting, and nocturnal pest detection. Modern vision-based systems, however, rely heavily on large-scale well-annotated image datasets, which remains challenging to obtain for nighttime operation scenarios. To address this, we propose an unsupervised image translation framework that converts daytime plant-row RGB images into near-infrared (NIR) nighttime counterparts without requiring pixel-to-pixel supervision. This enables the direct reuse of daytime semantic labels for training nighttime perception models. In particular, by incorporating a pre-trained Contrastive Language-Image Pre-training (CLIP) model, the proposed framework is designed to preserve semantic consistency during day-to-night translation. Additionally, a visibility mask is introduced to account for the limited effective range of NIR illumination in nighttime scenes. We conduct comparative evaluations with state-of-the-art image translation baselines and demonstrate higher image qualities, as supported by improved performance in downstream semantic segmentation for nighttime visual navigation. For evaluation, we utilize AgriNight--a novel dataset comprising 428 daytime and 549 nighttime images collected using night-vision-equipped mobile robots in agricultural fields and manually annotated with pixel-wise semantic labels--and introduce it as the first benchmark for nighttime agricultural visual navigation. We also perform real-time autonomous navigation experiments with a physical robot operating at night. The data and code are available at: https://github.com/mamorobel/AgriNight.

Large language models exhibit remarkable emergent behaviors, yet the physical mechanism governing their collective dynamics remains poorly understood. Cognitive Field Theory predicts that learning reorganizes the time-scale density of states (TDOS) through the infrared accumulation of slow relaxation modes, thereby enhancing the memory self-energy, reducing the cognitive forgetting gap, and strengthening the collective susceptibility. Using publicly available Pythia language models, we extract relaxation spectra directly from Transformer layer Jacobians throughout training, network depth, and model scale, allowing the TDOS, memory self-energy, forgetting gap, memory kernel, and infrared critical exponent to be measured quantitatively. The measurements reveal progressive infrared accumulation of slow relaxation modes, producing an approximately flat infrared TDOS with $ρ(λ)\simλ^{-0.1}$ and scale-free memory kernels $K(t)\sim t^{-1}.$ The memory self-energy exhibits a pronounced transient maximum during early optimization before relaxing toward a metastable near-critical regime, corresponding to the smallest cognitive forgetting gap and the largest collective susceptibility predicted by Cognitive Field Theory. These observations provide quantitative experimental evidence that Transformer dynamics are governed by infrared collective organization. The reproducibility of the same dynamical behavior across training, network depth, and model scales suggests that infrared slow-mode organization represents a universal collective principle of Transformer dynamics.

Teleoperating remotely operated vehicles (ROVs) in flooded, cluttered infrastructure is fundamentally limited by narrow 2D egocentric views and subsea communication latency. We present a multimodal teleoperation architecture built on a ROS-Unity framework that decouples proactive spatial planning from reactive boundary avoidance. The system replaces static camera feeds with a Dynamic Adaptive Viewpoint System (DAVS), which uses continuous optimization and real-time 3D Gaussian Splatting (3DGS) to synthesize an occlusion-free exocentric viewpoint from onboard state estimation. To further reduce sensory workload, a torso-mounted vibrotactile suit maps local obstacle clearance to intuitive haptic proximity cues. The architecture was evaluated in a controlled human-subject study (N = 30) using a BlueROV2 navigating a complex simulated underwater facility. A 3 x 4 repeated-measures design compared three interaction modalities (Egocentric, Haptic, Exocentric) under four communication delays (0.0-1.0 s). Performance was quantified using behavioral measures and functional near-infrared spectroscopy (fNIRS) to assess task-evoked prefrontal activation. Results show that reactive haptic feedback improves path adherence under minimal delay, whereas the 3DGS-driven exocentric visualization provides superior resilience under severe latency (0.5-1.0 s), significantly outperforming the other modalities. fNIRS further revealed a cognitive disengagement effect: increasing latency during conventional egocentric teleoperation overloaded working memory and reduced prefrontal activation, whereas the proactive spatial context provided by DAVS sustained executive control. These findings demonstrate that spatially grounded, multimodal assistance can substantially improve operator performance and cognitive endurance during latency-degraded underwater teleoperation.

Infrared remote-sensing imagery captures intensity structure, object-background contrast, and illumination-invariant cues often invisible in RGB imagery. Yet, most remote-sensing vision-language resources and models focus on visible-band semantics, leaving infrared vision-language understanding underexplored. We introduce MonoIR-RS, a large-scale infrared remote-sensing vision-language dataset and benchmark that couples IR-aware data construction with CLIP-style contrastive adaptation and VLM instruction tuning. Built from the same source pool and split as FusionRS, MonoIR-RS retains the infrared image as the model-facing modality, yielding 600,000 synthesized infrared images and 59,032 retained IR-aware caption records. The model experiments use this retained language-supervision subset, whose captions rewrite supervision around grayscale structure and infrared-style contrast instead of RGB appearance. We show that the synthesized infrared imagery is markedly closer to real thermal imagery than a grayscale conversion on the AVIID benchmark. We fine-tune five CLIP backbones and six VLM backbones, and calibrate them against zero-shot behavior: IR-aware adaptation lifts CLIP mean recall by up to 12.8 points and drives VLM captioning IR-cue coverage to 100% while reducing residual RGB-color leakage to near zero. By isolating the infrared modality from RGB-IR dual-modal learning, MonoIR-RS offers a controlled, reproducible testbed for aligning infrared remote-sensing evidence with language.

Vision-language models (VLMs) are increasingly deployed on infrared (IR) remote sensing imagery in security-critical settings, yet their adversarial robustness remains unexamined. We present AirflowAttack, to our knowledge the first adversarial attack for IR remote-sensing VLMs and the first to weaponize thermal-airflow turbulence as the perturbation prior. A lightweight generator synthesizes a single input-agnostic perturbation regularized toward physically plausible airflow patterns. Optimized on one surrogate CLIP model, it attains a mean zero-shot scene-classification attack success rate (ASR, the fraction of samples whose top-1 class changes) of 48.5% across five diverse CLIP backbones, far exceeding four IR-specific physical baselines (27.7--37.0%). Applied to six state-of-the-art VLMs, it cuts scene-classification accuracy by up to 38.2% relative, yet paradoxically makes some models more confident in their IR analysis, confabulating the perturbation as genuine thermal evidence such as temperature gradients and convection. Ablations show the airflow prior raises physical plausibility at no measurable cost to attack success. Together with a benchmark spanning eleven models and four tasks, these findings expose critical vulnerabilities in the rapidly expanding IR VLM ecosystem.

Infrared small target detection (IRSTD) aims to identify long distance small targets from complex infrared backgrounds, and is a fundamental task in remote sensing. Deep learning methods have improved IRSTD by learning discriminative image-to-mask mappings, but such feed-forward designs often underuse physical decomposition structure between targets and backgrounds. Deep unfolding methods partially address this issue by embedding model-driven iterations into neural networks, yet existing designs still operate mainly in image domain and use updates and memory mechanisms that are not fully coupled with underlying optimization process. To address these limitations, we propose Latent Consistent Proximal unfolding network (LCPNet). First, we verify that low-rank prior remains valid in latent representations and perform unfolding in this space, preserving physical constraint while avoiding repeated compression of intermediate states. Second, we derive a Latent Consistent Proximal (LCP) solver that evolves each latent variable from its previous state rather than reconstructing through an indirect residual, and stabilizes small target updates through task-adaptive normalization and gain control. Third, we introduce Shared Optimization Memory (SOM), a common historical state shared by all decomposition variables to provide coordinated guidance across unfolding stages. Extensive experiments on four public benchmarks demonstrate that LCPNet outperforms state-of-the-art methods while achieving accurate and robust detection with low false alarms and competitive efficiency. Model and code are available at https://github.com/Tianfang-Zhang/LCPNet.

Robust object detection under adverse visual conditions remains a long-standing challenge for multi-modal perception systems. Existing fusion-based methods typically require both RGB and infrared (IR) inputs, and treat them equally during both training and inference, which compromises their robustness when the RGB modality becomes unreliable or unavailable. In this case, we propose \textbf{InfraNet}, an IR-centric quality-aware framework that regulates RGB guidance during training and supports flexible RGB--IR or IR-only deployment. InfraNet employs an asymmetric architecture where the primary IR pathway extracts multi-scale infrared features for predictions, while the auxiliary RGB pathway provides reliability-controlled supervisory signals. The core of InfraNet is \textbf{QualGate}, a quality-aware fusion module that learns a task-oriented control signal to suppress unreliable RGB guidance and compensate IR features during cross-modal training. Built upon InfraNet, we design two architectural variants: a lightweight IR-only architecture InfraNet-IR and an RGB--IR architecture InfraNet-RGB-IR. Our method is evaluated through extensive experiments on four benchmark datasets (LLVIP, FLIR-Aligned, M$^3$FD, and DroneVehicle), showing strong or competitive accuracy in challenging low-light and adverse weather conditions. Notably, InfraNet maintains high efficiency in IR-only inference, making it both accurate and computationally efficient.

Infrared small target detection (IRSTD) remains challenging due to tiny target size, low signal-to-noise ratio, severe foreground-background imbalance, and blurred boundaries in complex scenes. Existing methods usually rely on post-activation probability-domain supervision for discrimination, where weak targets and strong clutter may produce saturated and close probabilities, limiting weak-target discrimination. Meanwhile, blurred boundaries and halo-like predictions mainly stem from thermal diffusion, tiny target scale, boundary uncertainty, and insufficient explicit contour constraints. To address these issues, we propose Adaptive-Contrastive SLSIoU (AC-SLSIoU), a plug-and-play discriminative and shape-aware loss for IRSTD. Specifically, a Logit-Domain Margin Constraint (LDMC) is introduced to enlarge the response gap between targets and informative hard negatives in the logit space, thereby enhancing weak-target discrimination. Adaptive Boundary Suppression (ABS) applies scale-aware annular penalties to refine target contours and suppress halo-like overflow responses. In addition, False-Alarm Focal Loss assigns larger weights to high-probability negative samples, further penalizing persistent high-confidence false alarms. Without introducing extra inference overhead, the proposed method can be seamlessly integrated into existing detectors and consistently improves both detection accuracy and shape quality. Extensive experiments and cross-backbone evaluations demonstrate the effectiveness, robustness, and generalization ability of the proposed method for infrared small target detection.

Near-Infrared (NIR) spectroscopy has emerged as a promising alternative to traditional soil analysis methods, offering advantages such as speed, low cost, and non-destructive testing. This work proposes a machine learning (ML) approach to calibrate predictive models for carbon (C) and nitrogen (N) content in Oxisols and Inceptisols, utilizing NIR spectral data acquired with a portable MyNIR device. Various preprocessing methods were evaluated, with the most effective being the Savitzky-Golay (SG) filter and a robust outlier removal method based on the Nonlinear Iterative Partial Least Squares (NIPALS) algorithm coupled with a Huber loss function. Multiple validation strategies were compared, including 10-fold cross-validation, leave-one-out, and holdout via the Kennard-Stone method, followed by standardization. Stacking ensemble learning models were employed, using Partial Least Squares (PLS), Support Vector Regression (SVR), and Ridge as base models, with linear regression as the meta-model. The models were evaluated using R2, Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), and Ratio of Performance Deviation (RPD) metrics. The performance gap between soil types suggests the influence of pedological characteristics. Furthermore, the models achieved an RPD > 2.0 with low overfitting, validating the potential of this approach for rapid C and N quantification. This study contributes to the optimization of sustainable agricultural practices, aligning with the demand for efficient and environmentally friendly analytical methods. The developed technique enables faster decision-making for producers and consultants based on organic matter content, fertility indicators, and nutrient availability.

Long-wave infrared (LWIR) hyperspectral observations contain distance-dependent atmospheric absorption signatures, providing a physical basis for long-range passive ranging. However, in natural scenes, these signatures are nonlinearly coupled with target temperature, material emissivity, and path radiance, making distance inversion from observed radiance ill posed. Existing methods typically rely on full-band measurements and pixel-wise joint optimization, which is computationally expensive and does not explicitly exploit sharp atmospheric absorption structures. This paper proposes an Absorption-Guided Distance-Decoupled Estimation and Refinement (ADER) framework for LWIR hyperspectral passive ranging. ADER represents emissivity with B-spline control points under a smoothness prior, suppressing overfitting to atmospheric absorption structures and enabling distance-decoupled estimation. It further uses ozone-absorption cues to classify pixels into emission-dominant and reflection-dominant groups. For emission-dominant pixels, ADER compensates path radiance and transmittance and estimates distance by one-dimensional absorption-residual minimization. For reflection-dominant pixels, ADER refines the initial estimate using downwelling-radiance compensation based on the complete radiative model. To reduce spectral redundancy, ADER also introduces a greedy band selection strategy based on multi-scene effective Fisher information for the distance parameter. Experiments on real scenes show that ADER recovers LiDAR-consistent spatial distance structures under both full-band and 20-band settings, improves ranging accuracy in the evaluated regions, and achieves approximately two orders of magnitude speedup over a public full-band hyperspectral ranging method.

RGB-T detectors leverage the complementary strengths of visible and thermal infrared modalities, achieving robust performance under challenging conditions. Many of them resort to heavy dual backbones and exhaustive cross-modality fusion across the entire image, leading to impractically high computational costs. We observe that most image regions are smooth backgrounds (e.g., sky, ground) that can be easily handled by lightweight single-modality models. In light of this observation, we propose a sparse fusion mechanism for efficient RGB-T detection: first rapidly scanning the image to identify the proposals and then carefully examining the remaining sparse proposals via feature fusion. We propose a two-stage framework to instantiate this mechanism, which performs detection in two stages: 1) a lightweight and modality-specific detection stage that produces high-recall RoIs, and 2) a fusion-driven examination and refinement stage that filters out the false positives and refines the bounding boxes. This design enables the detector to adaptively allocate more computational resources to the potential foregrounds, improving the efficiency while ensuring detection accuracy. Extensive experiments show that our method achieves competitive performance with substantially fewer parameters and lower cost, while maintaining strong scalability to high-resolution images.

Inspection of offshore wind turbine rotor blades is critical for predictive maintenance to maximise efficiency and extend operational lifetime. However, it remains a challenging task due to remote locations, large structural dimensions, and the limitations of current UAV-compatible sensor systems. While existing approaches can detect certain types of surface anomalies, reliable classification of defect types often remains a manual and error-prone process. This paper presents the design of a UAV-mounted multimodal sensor network combining an industrial RGB camera, a passive thermal infrared camera, and an in-house developed 3D scanner. All sensors are co-calibrated into a common coordinate frame, enabling spatial superimposition of geometric, colour, and thermal data. The system is designed to operate at close range, addressing three fundamental sensing challenges: platform motion, large field of view, and millimetre-level measurement accuracy. Preliminary laboratory results demonstrate synchronised multi-sensor acquisition and initial point cloud reconstructions, forming the basis for future airborne inspection trials.

Infrared small target detection remains challenging due to severe background clutter, low contrast, and weak spatial responses where geometric overlap alone is insufficient to characterize detection quality. In this work, we propose REEM (Reweighted Explicit-visibility Enhanced Modulation), a lightweight SCR-guided difficulty-aware optimization framework that incorporates Signal-to-Clutter Ratio (SCR) as a physically meaningful visibility prior during training. Instead of modifying the network architecture or directly optimizing SCR, REEM computes a ground-truth local SCR from the input image and applies a differentiable modulation to the soft-IoU learning signal, emphasizing low-visibility targets while preserving stable optimization and identical inference behavior. REEM is integrated into a U-Net-based MSHNet without introducing additional parameters, architectural modifications, or inference-time overhead. Extensive experiments demonstrate consistent improvements over the baseline, achieving higher IoU and detection probability (Pd) together with substantially reduced false alarms (FA), particularly under challenging low-visibility conditions. These results suggest that SCR-guided difficulty-aware optimization provides an effective and physically grounded complement to conventional overlap-based objectives for infrared small target detection. The code is available at https://github. com/yall-in-one/Reemm.

Remote sensing vision-language models have advanced Earth observation understanding, but most existing work remains centered on RGB imagery, leaving the complementary information in infrared data underexplored. Infrared images provide distinctive cues, including thermal intensity structures, object boundaries, and illumination-invariant scene features, which can enrich visual-language learning beyond conventional RGB observations. However, a large-scale RGB-infrared-text dataset for remote sensing vision-language modeling is still absent. To address this gap, we introduce FusionRS, the first large-scale RGB-infrared-text dataset designed for dual-modal vision-language learning in remote sensing. FusionRS is constructed by translating diverse public RGB remote sensing images into infrared-style counterparts, forming aligned RGB-IR image pairs. Each pair is associated with conventional scene captions and IR-aware captions that explicitly describe infrared-specific visual properties while preserving semantic content. Based on FusionRS, we train dual-modal vision-language foundation models for RGB-IR joint understanding. We first train CLIP-style models for RGB-IR-text alignment, and then fine-tune generative VLMs for dual-modal RGB-IR captioning. Experiments show that FusionRS improves RGB-IR alignment, infrared-to-text retrieval, and dual-modal captioning over RGB-only and non-IR-aware training settings. Ablation studies further verify that IR-aware captions are crucial for strengthening infrared-language alignment, highlighting the importance of modality-specific textual supervision for more scalable RGB-infrared remote sensing vision-language representation learning.

Infrared small target detection in dynamic scenes remains challenging due to the highly coupled motions among targets, imaging platforms, and dynamic backgrounds. Existing multi-frame methods usually perform implicit temporal modeling, where coherent background dynamics dominate motion correspondence learning, leading to an inherent trade-off between detection and false alarms. In this work, we observe that background motions exhibit strong global coherence, whereas small targets mainly correspond to sparse local motion anomalies. Moreover, many false-alarm responses maintain high consistency with globally coherent motion patterns, indicating that they mainly originate from coherent background dynamics rather than genuine target motions. Based on these observations, we propose a decoupled motion representation learning framework for moving infrared small target detection. Specifically, an explicit motion branch is introduced to model globally coherent motion dynamics using pretrained optical flow priors, together with a structure-preserving self-supervised adaptation strategy for infrared motion correspondence learning. Meanwhile, an implicit motion branch based on deformable feature alignment is designed to capture target-sensitive local motion anomalies under coherent motion guidance. Furthermore, a coherent-motion-guided local anomaly reasoning module is proposed to identify and suppress coherent-motion-induced false responses during localized motion modeling. Extensive experiments on two challenging infrared small target detection benchmarks demonstrate that the proposed method consistently outperforms existing state-of-the-art approaches, particularly in dynamic scenes with complex motions, while maintaining favorable inference efficiency.

Infrared and visible image fusion aims to integrate complementary modalities, while existing Euclidean methods impose rigid distance metrics that distort multi-modal interactions and parent-to-child semantic hierarchies. To overcome these limitations, we introduce a text-driven fusion framework empowered by hyperbolic manifold learning. During training, BLIP-extracted text prompts serve as topological anchors within the hyperbolic space, guiding vision-attribute alignment through hyperbolic embeddings that naturally accommodate varying semantic granularities. By exploiting the exponential volume growth dictated by the Poincaré ball's negative curvature, this approach seamlessly embeds hierarchical trees to encode coarse-to-fine semantics without metric saturation, while the vast peripheral space prevents texture distortion during cross-modal fusion. At inference, the fusion process autonomously adapts to input content using the learned text-attribute priors, completely eliminating the need for textual input. Experimental results show our method outperforms state-of-the-art approaches on benchmark datasets, with code available at https://github.com/Shaoyun2023/TEDFusion.

Semantic segmentation is a fundamental component of visual perception in modern automotive systems, enabling pixel-level scene understanding. Near-Infrared imaging (NIR) offers stable detection under difficult illumination conditions, but the development of domain-specific semantic segmentation models remains challenging due to the lack of high-quality annotated data from real-world scenarios. Synthetic datasets offer a scalable alternative, but models trained on synthetic images often suffer performance degradation when transferred to real domains. We present the first systematic study on synthetic to real domain adaptation for semantic segmentation in NIR images in the automotive domain. We propose a generative augmentation framework that transforms synthetic images into realistic NIR-style variants via our introduced target style adaptation (TSA). TSA fine-tunes a latent diffusion model via low-rank adaptation on a small curated set of real NIR images and applies it to synthetic training data using structure-preserving multi-signal conditioning. To reduce texture bias and improve segmentation robustness, we further apply a Voronoi-based style diversification strategy (VSD) that modifies the original textures while preserving scene geometry. Experiments with multiple model architectures on NIR data from vehicle interiors and street scenes show that balancing inductive bias during training leads to noticeably more robust semantic segmentation and effectively reduces the domain gap in our real-world scenarios by up to 63.6% on exterior and 28.4% on interior data. The code is available at GitHub.

In intelligent video surveillance, cameras record image sequences during day and night. Commonly, this demands different sensors. To achieve a better performance it is not unusual to combine them. We focus on the case that a long-wave infrared camera records continuously and in addition to this, another camera records in the visible spectral range during daytime and an intelligent algorithm supervises the picked up imagery. More accurate, our task is multispectral CNN-based object detection. At first glance, images originating from the visible spectral range differ between thermal infrared ones in the presence of color and distinct texture information on the one hand and in not containing information about thermal radiation that emits from objects on the other hand. Although color can provide valuable information for classification tasks, effects such as varying illumination and specialties of different sensors still represent significant problems. Anyway, obtaining sufficient and practical thermal infrared datasets for training a deep neural network poses still a challenge. That is the reason why training with the help of data from the visible spectral range could be advantageous, particularly if the data, which has to be evaluated contains both visible and infrared data. However, there is no clear evidence of how strongly variations in thermal radiation, shape, or color information influence classification accuracy. To gain deeper insight into how Convolutional Neural Networks make decisions and what they learn from different sensor input data, we investigate the suitability and robustness of different augmentation techniques...

Visible-infrared person re-identification (VI-ReID) is challenging due to the large modality discrepancy between visible and infrared images. We contend that this discrepancy is largely related to differing lighting conditions, including differences in light wavelength and light source type. Recently, frequency-based VI-ReID approaches have achieved notable success because frequency information can better extract identity-relevant contours and details while excluding irrelevant lighting and color. However, existing methods either do not distinguish different frequency bands or focus on only one band, which is insufficient under diverse lighting conditions. To perform comprehensive frequency domain learning, we propose a Multi-Frequency Expert Network (MFEN) that enables multi-frequency modulation and adaptively combines different bands through a mixture-of-experts design. We further introduce Random Frequency Augmentation (RFA) and Frequency Auxiliary Optimization (FAO) to better train MFEN. The three modules are complementary and jointly capture critical frequency-domain details for robust representation learning. Extensive experiments on three VI-ReID datasets demonstrate the effectiveness of our approach.

Transfer learning from large-scale RGB foundation models to infrared (IR) imagery through knowledge distillation (KD) remains challenging due to fundamental differences in image formation physics. We investigate the spectral structure of the RGB--IR modality gap and observe that feature divergence is not uniform across spatial frequencies: low-frequency components (shape, layout) show greater cross-modal alignment than high-frequency components (texture, fine edges), which reflect modality-specific characteristics. Based on this analysis, we propose FreqKD, a frequency-decoupled distillation framework that applies asymmetric supervision adapted to each band's cross-modal consistency. The method employs strict mean squared error (MSE) on the low-frequency band to preserve shared structural information and a relaxed log-MSE loss (weighted at 0.1) on the high-frequency band to provide edge guidance while tolerating texture differences. Spectral divergence analysis on 500 paired samples shows that high-frequency divergence exceeds low-frequency divergence by a factor of 2.4x on average across all analysed transformer layers. On KAIST multispectral pedestrian detection, FreqKD achieves 64.1 mAP50, improving 2.4 points over the DINOv2 baseline. The learned representation transfers across datasets (FLIR ADAS, +2.1 mAP50), tasks (MFNet segmentation, +1.85 mean intersection-over-union), and architectures (ResNet-50, +1.0 mAP50). Code is available at: https://anonymous.4open.science/r/freq_decoupled_kd-5E5A

The escalating demand for mental healthcare, driven by rising societal stress, highlights the limitations of traditional psychiatric diagnostics. Conventional methods - relying primarily on clinical interviews and patient self-reports - are inherently vulnerable to subjective bias and the varying empirical judgment of practitioners. To address the need for quantitative evaluation, biological signal-based detection, including electroencephalography (EEG) and functional near-infrared spectroscopy (fNIRS), has emerged as a promising objective alternative. Such technology is particularly vital for identifying latent depressive states that may be unrecognized by the subjects themselves. Furthermore, in aging populations, the high comorbidity between depression and dementia necessitates early differentiation to prevent mutual symptom exacerbation and maintain Quality of Life (QoL). This pilot study of eleven healthy students establishes a framework for biological signal-based depression detection, serving as a foundational step toward automated, objective diagnostic tools for clinical use.

Passive long-wave infrared (LWIR) hyperspectral imaging under a standoff geometry depends on atmospheric absorption and emission, as well as reflected radiance, thus making atmospheric compensation essential to get knowledge of a target of interest. Despite its importance, this compensation has been largely overlooked due to its practical and modeling difficulty. In this paper, we present a lightweight set-based deep learning framework that takes multiple radiance measurements, collected at different standoff ranges, as input and jointly estimates transmittance, atmospheric path radiance, and a shared downwelling spectrum. We analyze the learned representation with a sparse autoencoder and observe that several latent features do activate on geographically coherent subsets of the test data despite the absence of location supervision. Experiments on a MODTRAN generated standoff LWIR dataset demonstrate low spectral distortion across all estimated products. The dataset and code is publicly available at: https://factral.co/SAE-LWIR/

Eye tracking is essential for smart glasses, as it provides insight into user attention for ambient intelligence applications. However, most existing eye-tracking systems rely on active infrared (IR) illumination, creating practical barriers to all-day outdoor use due to power consumption. In this paper, we investigate whether passive IR cameras alone, without any active IR light source, can enable reliable pupil detection in unconstrained outdoor environments, where ambient sunlight serves as the sole illumination source. To support this investigation, we introduce AmbientEye, a large-scale dataset of 2,606,225 eye images collected from 35 participants from 19 countries. It is captured outdoors under natural sunlight with two off-axis camera configurations and two sun-orientation conditions. We provide high-quality pupil annotation through SAM2 automatic segmentation, followed by refinement by human annotators. We benchmark a state-of-the-art pupil segmentation algorithm on our dataset and compare its performance with that on existing datasets under controlled IR illumination. Results reveal a substantial drop in pupil segmentation performance from 0.928 on controlled IR datasets to 0.767 on AmbientEye. This performance gap highlights the challenge of the ambient-light setting. This positions AmbientEye as a first benchmark for an unexplored and highly practical eye-tracking scenario.

In multi-modal image registration, the primary challenge lies in shared structural information extraction. Compared to Transformers, Structured State Space Duality (SSD) offers greater global structural feature extraction with higher efficiency during training and inference. Inspired by these advantages, we propose a novel algorithm for multi-modal image registration, named RegNetMamba-2. Our algorithm incorporates SSD into coarse-to-fine matching process to extract local and global structural features effectively. Firstly, SSD is applied in three different scales for multi-modal feature extraction in our network. To strengthen local representation, we pay more attention on foreground edge and structural information by feature scaling function of SSD. Secondly, for shared feature extraction of input images and multi-modal feature fusion in all scales, we propose cross-modality feature fusion model based on SSD, consisting of Cross-Modality feature Interaction (CMI) module and Multi-Scale feature Fusion (MSF) module. CMI module is designed for cross-modality feature extraction of each scale by SSD in cross form. MSF module is designed to employ a progressive upward fusion in feature-level to obtain fine features, consisting of multi-modal features in all scales. Following coarse-to-fine, the features in 1/8 scale from CMI and 1/2 scale from MSF are collected to calculate matching probability scores. Then we respectively establish matching process by correspondences of pixel-wise. Extensive experiments demonstrate that comparing with state-of-the-art deep-learning based algorithms, RegNetMamba-2 has achieved good effects in both performance and efficiency for multi-modal image registration on the following datasets: VIS-SAR (OSDataset), VIS-IR (LGHD/RoadSence) and VIS-NIR (RGB-NIR sense).