Robotic Datasets

Multi-robot collaboration could enable more efficient and scalable solutions to complex robotic tasks, but collaboration under partial observability remains challenging. Natural-language communication offers a promising approach to coordinating robots under partial observability. However, in decentralized manipulation, jointly learning explicit inter-robot communication and skill-level action selection from multimodal demonstrations remains underexplored for small vision-language models (VLMs) intended for on-device deployment. To address this gap, we introduce RoboTalk, a synthetic data-generation pipeline and dataset of 7,950 multimodal trajectories spanning 53 mobile-manipulation kitchen tasks for training small VLMs to communicate and coordinate. The dataset includes a leader-follower planning protocol, tool calls (perception, manipulation, navigation, and communication), rationale traces, and diversified natural-language communication. Fine-tuning open-source models on our dataset can reach 77% success on novel held-out tasks, a significant improvement over the untuned open source models, which had a success rate of around ~2%.

Robot foundation models learn manipulation from large demonstration corpora, but surgery is missing from those corpora: across the 780-hour Open-H surgical collection, one dataset carries synchronized force and none covers an aesthetic procedure. Liposuction is the hard case, because the instrument works under the skin and the surgeon operates by feel and by judgment. Humynex Robotics builds curated expert datasets for this kind of procedure. HumynexSurg-1 is the first release: a master liposuction surgeon performing on porcine abdominal tissue while narrating every decision, recorded with synchronized suction pressure, six-axis hand force/torque, top-down RGB-D video, side video and a lavalier microphone -- 14 episodes, 42,738 frames, 35.6 minutes, 356 utterances of which 95% compile into a liposuction-specific label schema. The capture follows a patent-pending sensing plan organized around the quantities a policy needs, so a channel captured today by a model can be upgraded to a sensor tomorrow without changing the data format. This release captures the instrument motion as a tool-hand track in the side video and provides the force channel as state; the funded capture adds a measured 6-DoF handle pose, a validated force channel, ultrasound imaging of the fat layer, and palpation sensing. As a proof of concept, NVIDIA Isaac GR00T N1.7 fine-tunes on the dataset with no custom code in under an hour per run and learns the recorded sessions; scaling probes on the same episodes show where further gains come from: every new session lowers the error on an unseen session. The dataset, its label schema, its quality-assurance reports and its evaluation protocol are the product; the next capture, many short sessions across fat regions with the sensors named here, is what the probes point to.

Language-guided manipulation can depend on physical properties that visible appearance does not reveal. Temperature is one such property, but object datasets for robot learning rarely associate measured temperatures with object appearance and geometry. We present HEARTH, an object-centric RGB-thermal-3D dataset of 90 physical objects from 18 everyday categories, comprising 145 captured object states. Our pipeline maps apparent surface temperatures onto reconstructed meshes through camera calibration and pose transfer. The dataset includes raw temperature measurements, camera parameters, RGB-textured meshes, and thermal textures for simulation. We use these assets to construct three LIBERO-derived tasks and collect 1,200 demonstrations for fine-tuning a pretrained vision-language-action (VLA) model, $π_{0.5}$. In an ablation study, adding thermal observations to the VLA increases success on temperature-dependent object-selection tasks from 35.0% for the RGB-only baseline to 75.0%. These results demonstrate the utility of HEARTH for training robot policies to follow temperature-related instructions.

World models endow perceptual systems with the ability to predict how scenes evolve under interaction. They are most beneficial when trained on diverse volumes of data, to instill a rich prior into downstream applications. Existing methods typically require robot action labels to learn action-conditioned 3D dynamics, which excludes web video data from the training pool. We study 3D point track completion as a pre-training objective for learning transferable 3D dynamics without robot data. Given a single RGB-D observation and sparse partial 3D trajectories (tracks), we predict future 3D tracks of all observed points. We show this objective produces a rich 3D dynamics prior, without requiring robot action labels. We contribute a diverse dataset of 2.9 million synthetic frames spanning deformable, articulated, and rigid objects, and use it to train PointZero. We show that a flexible and expressive transformer, PointZero, outperforms prior methods on the same data. We demonstrate the utility of our pre-training objective by post-training PointZero for two downstream applications: (1) action-conditioned 3D dynamics prediction and (2) imitation learning. When fine-tuned to condition on end-effector pose, PointZero outperforms the baselines on the recent PGND 3D dynamics benchmark. When fine-tuned to predict robot actions and 3D tracks, PointZero outperforms or matches the baselines on 6/7 simulated and real-world robot manipulation tasks. We furthermore evaluate training PointZero from scratch to isolate the benefits of our proposed architecture from those of our proposed pre-training objective and dataset. We release the dataset, checkpoints, and full training recipe.

Due to the highly deformable nature of garments, training a generalizable policy for robotic T-shirt folding and unfolding remains a significant challenge. In this work, we present a large-scale synthetic dataset for robotic T-shirt folding and unfolding, covering 6 robotic embodiments, 1K T-shirts, 1K environmental assets, and 120K episodes with rich annotations, which can be used to train a wide range of manipulation policies. We first follow the FoldNet pipeline to generate a large-scale dataset of physically simulatable T-shirts with diverse appearances and annotated semantic keypoints. Based on these semantic keypoints, we then generate manipulation demonstrations for different robotic embodiments through a unified rule-based framework. We use these demonstrations to train visuomotor policies, and experimental results demonstrate that models trained solely on our synthetic data can achieve over 90% end-to-end task success rates when directly deployed to unseen real-world environments and previously unseen T-shirts from arbitrary initial configurations. Project URL: https://pku-epic.github.io/FoldNetXX/.

Collecting high-quality robot data remains a fundamental challenge for training robot foundation models. Task and motion planning (TAMP) offers a scalable way to generate demonstrations, but our experiments show that raw TAMP trajectories provide surprisingly little benefit when used to fine-tune pretrained vision-language-action (VLA) models, despite successfully solving the target tasks. We hypothesize that this failure arises from a behavioral distribution mismatch between planner-generated trajectories and the data used to pretrain the VLA. To address this mismatch, we introduce DATAFARM: Distribution-Aligned Task And motion planning for Fine-tuning A Robot foundation Model, an approach that incorporates the pretraining distribution directly into TAMP trajectory generation. DATAFARM aligns generated trajectories with the pretraining data in robot joint configurations, motion style, and temporal execution profiles. We evaluate DATAFARM on three tabletop manipulation tasks that TAMP can perform and a cloth-folding task beyond the capability of TAMP. DATAFARM achieves an average success rate of 56.7%, substantially outperforming raw TAMP (8.3%) while approaching human teleoperation (61.7%). On Deformable Object Manipulation, which is outside the fine-tuning distribution, the fine-tuned model retains 85% success, compared with 90% for the pretrained model. These results show that aligning planner-generated demonstrations with the pretraining distribution can make TAMP an effective source of data for VLA fine-tuning. Website and code: https://prpl-group.com/datafarm/

Applying an imitation learning policy to a new manipulation task usually requires collecting new demonstrations and retraining the model, which makes sample efficiency a practical concern. Pretraining on large-scale robot datasets is effective in this respect, but such datasets are costly to collect and train on, while data augmentation techniques typically require a new round of data generation and retraining for each task. A complementary question is what useful prior can be provided to a policy at negligible cost before any task-specific data are collected. In this study, we construct a geometric visual pretraining dataset in which each scene contains only a plane, an object, and a hand, and trajectories are generated automatically. The scenes contain neither textures nor backgrounds; pretraining primarily exposes the policy to the geometric relationship between the hand and the object. Furthermore, representing the hand as a cube avoids tailoring the dataset to a specific robot morphology. We evaluate this geometric prior using ACT on three simulated robots across five manipulation tasks each, as well as on three real-world robot tasks. Across many of these robot--task combinations, fine-tuning from the geometric prior achieves higher success rates in the early stages of training than training from scratch while using only a small number of task demonstrations. These results suggest that even highly simplified geometric scenes can provide a useful initialization that transfers across robots and to real-world tasks when task data are limited.

Human video datasets offer an abundant and diverse source of interaction data that can complement expensive real-robot data. To bridge the human-to-robot embodiment gap, existing approaches either robotize videos in task-matched settings or address observation and action alignment separately. In this work, we systematically examine whether robotized human videos can serve as an effective and scalable source of robot-aligned supervision. To this end, we develop a robotization pipeline that converts heterogeneous human videos into robot-aligned observations and action trajectories while inferring missing intermediate signals across annotation levels. Using this pipeline, we construct the HuRo dataset, comprising about 630K robotized episodes and 142M processed frames from five human-video sources. Across four real-world manipulation tasks, pretraining a VLA policy on increasing amounts of robotized human-video data improves overall completion from 51.5% to 80.3% and OOD completion under spatial and visual shifts from 34.9% to 72.2%. Ablations further show that visual robotization improves OOD robustness and that end-to-end pretraining with retargeted actions outperforms visual-only transfer. Project website: https://3587jjh.github.io/HuRo.

Joint-Embedding Predictive Architecture (JEPA) world models learn a compact latent representation of the world that supports prediction and planning, but their capability to learn physics and generate physically realistic dynamics remains hitherto untested. In this work, we introduce SemiGroup-JEPA (SG-JEPA), which extends the LeWorldModel framework by supplying the parameter governing the physics to the temporal model via action-conditioning and jointly training an encoder and predictor through an autoregressive latent rollout. To evaluate the model's ability to generalize out of distribution, we design dynamical tasks under different gravitational fields that, despite obeying the same physical law, exhibit qualitatively different dynamics, ranging from floating motion in weak gravitational fields to rapid bouncing in strong ones. In contrast to DINO-WM, SG-JEPA reduces open-loop prediction error by up to 2 times on two-dimensional datasets, and increases control success rate up to 2.5 times for three-dimensional robotic datasets, for which we train independent diffusion policies. To explain this advantage, we develop a linear feature model that separates local law-conditioned error from its recursive amplification under rollout. Guided by this model, we find that back-propagating the multi-step rollout loss into the representation trains the encoder to keep the features that the predictor can carry forward, and that those are the features the dynamics depend on, so most of the gain comes from the encoder learning better features rather than from the predictor learning better dynamics. See project page at https://sg-jepa.github.io.

Vision--language--action (VLA) models acquire broad generalization through large-scale pretraining, yet adapting them to a new task and robot embodiment still requires post-training on newly collected data. Unlike pretraining, post-training targets task- and embodiment-specific adaptation, making it particularly sensitive to data quality. In practice, collected robot datasets often contain heterogeneous errors, including execution mistakes, sensor drift, and timestamp misalignment, which can impair post-training and policy performance. Manual inspection is costly, while existing data-cleaning methods are typically tailored to particular corruption types. To address these challenges, we introduce \textsc{RoboDrop}, a data-curation framework that audits supervision using local gradient compatibility measured along the training trajectory as a proxy for its effect on post-training performance. During a one-epoch warm-up run, RoboDrop scores each candidate sample online by comparing its gradient with those of task-semantic and visually matched validation samples. The resulting sample scores are aggregated at the episode level, and a simple automatic post-processing rule converts them into filtering decisions. We evaluate RoboDrop on controlled observation--action corruptions, naturally suboptimal demonstrations in simulation, and real-robot datasets containing non-expert collection errors. Across these settings, RoboDrop more accurately distinguishes unreliable demonstrations than prior methods, while post-training on the curated data consistently yields stronger downstream policies, with average real-robot rollout success rising from $35.0\%$ to $67.5\%$. These results establish training-trajectory-aware, context-conditioned supervision auditing as an effective approach to robust VLA post-training.

Robot foundation models are trained and evaluated predominantly in English, and robot demonstration corpora do not exist for most languages. We study the addition of Greek to an open vision-language-action stack using only machine-rephrased instructions and no architecture changes. The main challenge is measurement rather than translation. Several plausible instruments produce false conclusions: a color-histogram metric rewards noise, a single-goal benchmark scores 84.6% under correct Greek and 82.6% under deliberately wrong instructions, training loss fails to predict Greek success, and single-run comparisons are dominated by seed variation. On a discriminative ninety-task suite with three seeds per arm, a multilingual text tower without Greek demonstrations remains at its wrong-instruction floor, while Greek-only training exceeds its control by at most 2.7 points. Bilingual training yields a consistent 6.7-7.1 point margin over its control and reaches about two fifths of English performance. The policy also overfits the translator's phrasing; training on seven phrasings per task approximately halves this penalty. Warm-starting from a language-adapted world model and unfreezing the text tower both degrade performance. The results support two practical requirements for low-resource robot-policy localization: build a guaranteed null before trusting a metric, and replicate low-resource-language results across seeds.

IRWOZ has improved industrial human-robot interaction (HRI) dialogue systems through domain-specific annotations. However, its initial version contains substantial noise in dialogue states and utterances, limiting state-tracking accuracy. We introduce IRWOZ 2.0, which addresses these limitations through large language model (LLM) enhanced generation (Mistral/Claude-3.5) and quality refinements. Our improved dataset expands to 390 dialogues across 4 industrial domains (Assembly, Delivery, Position, Relocation), featuring manual corrections and automated typo removal. Benchmark experiments on dialogue state tracking demonstrate significant improvements, with GPT-2's BLEU-4 score increasing from 0.1651 to 0.5604 compared to original IRWOZ. To support industrial HRI research, we publicly released IRWOZ 2.0 dataset at https://ieee-dataport.org/documents/irwoz-20-large-language-model-driven-dialogue-dataset-industrial-robot-conversations

Labelling vision datasets, especially for segmentation tasks, is a laborious and costly process that stymies novel developments in agricultural robotics. In this paper, we present DropClick, a click-guided segmentation tool that simplifies the annotation process. Our system utilises single-click inputs on objects to generate pseudo-labels, which can replace manual annotations. DropClick stands out as it is a semi-automated approach and does not require a click for every object in the scene. It can therefore further reduce the required amount of user input drastically. We evaluate our method on two challenging agricultural robotic datasets, SB20 and BUP20 for plant and fruit segmentation, respectively. DropClick is first trained on a small subset of just 5 images from the original training data. This DropClick model can then be deployed as a one-click segmentation system and achieves comparable or higher performance than other one-click methods achieving an mIoU of 70.0 and 72.6 points, for SB20 and BUP20 respectively. DropClick then excels at maintaining high performance when clicks are not given (e.g. dropped); when 50% of the clicks are missing it still maintains an mIoU of 68.9 and 71.3 points, for SB20 and BUP20 respectively. We validate DropClick as a pseudo-labelling approach by taking its outputs to train a Mask2Former instance-based segmentation model in a semi-supervised manner. In this process, partially removing user input from DropClick yields similar high performance when compared to providing all clicks, at 70.1 vs 70.7 points AP50 for SB20 and no difference for BUP20 at 77.0 for both models; at the same time saving 46.3% of total input for SB20 and 31.9% for BUP20.

Large-scale visuomotor policies have demonstrated impressive performance across a wide range of robot manipulation tasks. However, despite this success, manipulation polices often entangle scene geometry with the corresponding viewpoint, learning where objects lie in an image rather than where it lies in the task space. This entanglement inherently limits the corresponding policy's ability to learn from viewpoint-diverse datasets (ex. DROID, BridgeV2) and generalize beyond the viewpoints captured in their training data. In this work, we present ARGUS, an observation pre-processing pipeline that uses large-scale 3D vision models to align image observations from arbitrary camera viewpoints into a canonical viewpoint before passing it to downstream visuomotor policies. Experiments across training datasets with varying levels of viewpoint diversity, from fixed multi-view camera configurations to highly varied camera placements, show that our method consistently outperforms prior approaches across both limited-view and view-diverse training regimes. In efficiency comparisons, ARGUS demonstrates an ability to learn from view-diverse data, converging to high success rates 4-6x faster than previous methods by leveraging a simplified observation space. Overall, our findings show that leveraging large-scale 3D vision models reduces the learning burden on visuomotor policies, enabling more efficient learning from large-scale, viewpoint-diverse robot datasets.

Learning generalizable robot manipulation policies requires large-scale and diverse demonstration data. Egocentric human manipulation videos offer rich scene and task diversity, and prior work has shown that retargeting and rendering such videos into robot-format data can yield effective per-task policies at small scale. However, whether this approach can provide pretraining benefits for vision-language-action models at scale remains unexplored. We present \textbf{Ego2Robot}, a scalable pipeline that converts egocentric human manipulation videos into robot training data through action retargeting, robot-arm visual synthesis, and multi-level quality curation. Ego2Robot supports both curated datasets and in-the-wild videos, producing 18,561 hours of robot training data spanning 15 robot morphologies, making it the largest ego-to-robot dataset to date. To evaluate generalization, we extend RoboTwin2.0 with disentangled perturbation axes covering visual appearance, scene layout, embodiment morphology, and task semantics. Experiments show that joint pretraining on Ego2Robot-synthesized and robot data consistently improves out-of-distribution generalization across multiple perturbation types, with benefits validated on real-robot deployment. Project page: https://www-ye.github.io/ego2robot_blog/

Autonomous endoscopic navigation can reduce clinicians' operational burden, yet robust control remains challenging due to tissue deformation, transient occlusions, and rapidly changing viewpoints. Existing learning-based policies typically predict actions from current observations without explicitly modeling future dynamics, limiting their robustness and reliability in safety-critical settings. World Action Models (WAMs) offer a promising alternative by coupling predictive visual dynamics with action generation, but extending them to robotic endoscopy remains challenging due to limited training data, restricted viewpoint diversity, deformable anatomy, and high inference latency. We present EndoWAM, which is, to our knowledge, the first WAM for generalizable robotic endoscopic navigation. EndoWAM introduces future grounding, which predicts task-relevant target regions in future observations from intermediate denoising features of a video world model. Specifically, EndoWAM couples a lightweight diffusion transformer for future target-region prediction with a discrete action expert through a shared predictive representation. This design injects target-aware supervision into predictive dynamics modeling, improving robustness to visual degradation and viewpoint changes while enabling real-time control in a single denoising pass. We further introduce EndoMotion, a robotic endoscopic motion dataset spanning three anatomically distinct procedures: ureteroscopy, esophagoscopy, and endoscopic retrograde cholangiopancreatography (ERCP). EndoWAM consistently outperforms all baselines and alternative grounding strategies, while demonstrating strong zero-shot generalization to unseen viewpoints, environments, and targets. These results establish EndoWAM as a predictive, target-grounded framework for accurate, generalizable, and long-horizon navigation in visually constrained endoscopic environments.

Vision-language-action (VLA) models remain constrained by scarce action-labeled robot data, whereas action-free videos offer abundant observations of physical change. Latent action models can extract such priors, but reconstruction-trained codes may predict future observations without the structure required for joint generation with robot actions. Existing structured methods add temporal constraints but retain deterministic transition points, so residual errors in locally inferred transitions may propagate and compound under recursive composition. We introduce DLAM, a distributional latent-action model that represents each transition as a diagonal Gaussian. Reconstruction conditioned on the reference frame grounds the mean in observed visual change, while normalized composition and reversal over equal-gap triplets constrain both the mean and dimension-wise variance. Variance composition uses a lightweight shared-correlation coefficient to account for dependence between adjacent transitions that share an intermediate frame, whereas reversal negates the mean and preserves the variance. For downstream policy learning, we freeze the encoder and train a flow-matching policy to jointly generate mean transition sequences and robot actions. On held-out transitions, DLAM learns more temporally consistent latent dynamics than existing latent-action baselines and achieves stronger direct and cumulative reconstruction on held-out videos. Under the same controlled $π_0$ transfer protocol, it also improves policy performance on MetaWorld MT50, LIBERO, and real-world manipulation tasks. Controlled ablations show that normalized mean constraints account for most of the reconstruction gain, while learned variance and correlation-aware composition provide complementary improvements in downstream control.

World models must learn the joint dynamics of states, actions, events, and observations, yet existing video, robotics, and simulation datasets usually capture only part of this structure. We introduce CG-World, a large-scale world-state dataset and protocol derived from industrial computer graphics production pipelines. CG-World explicitly records intermediate states, including multimodal semantics, spatial structure, skeletal and controller states, motion curves, camera and lighting parameters, physics caches, contact events, and multi-pass renderings. CG-World v1 contains approximately 850,000 temporally aligned segments of 1-5 seconds. It separates latent states, observations, relations, events, and branch metadata, and organizes them into unified spatiotemporal samples. To support intervention learning and counterfactual reasoning, CG-World defines a branch lineage covering factual trajectories, observation interventions, action interventions, mechanism interventions, and strict counterfactual branches, with intervention targets, invariants, and alternative outcomes explicitly recorded. We evaluate the dataset on geometry-conditioned video generation, action prediction, and closed-loop vision-language-action policy transfer. Results show that CG-World provides reusable structured supervision for controlled generation, action modeling, and embodied policy transfer. We plan to expand CG-World through continued data collection and community collaboration toward a shared data infrastructure for world models, Physical AI, and embodied intelligence.

Understanding how robots and humans move in shared spaces is essential for designing effective social robot navigation policies and predicting human behavior. However, existing datasets often lack the diversity needed to capture differences in culture, geography, and human-robot interaction-factors that strongly shape appropriate social behavior. To address this gap, we introduce ACME: A Cross-cultural, Multi-Embodiment dataset for social navigation. A large-scale data collection effort across 8 sites in 5 countries, using 7 robot embodiments, ACME is a large and diverse multi-modal dataset aimed at advancing social navigation research, providing 29.35 hours of onboard robot data and 43.5 hours of overhead pedestrian tracking data. Unlike prior datasets, it focuses on capturing goal-driven social navigation behavior in complex social scenarios with explicit robot-crowd interaction through robot speech. To facilitate learning navigation policies and predicting pedestrian trajectories, ACME provides 3D and 2D scene features, odometry, interaction information, and human-annotated pedestrian trajectory labels. We make ACME easy to use by providing both human-readable data for each sensor modality as well as raw binary data. Our qualitative and quantitative analyses show that our dataset captures more challenging scenarios and a broader distribution of pedestrian behavior than previous datasets.

Autonomous biomedical laboratories increasingly rely on visual perception to recognize, localize, and manipulate transparent plasticware, yet high-quality real-world datasets for this setting remain limited. The scarcity of domain-relevant data is particularly restrictive in cluttered multi-object scenes, where mutual occlusion and view-dependent appearance changes remain challenging even for contemporary visual foundation models. Existing transparent-object datasets have advanced segmentation, depth, and pose estimation, but they usually do not evaluate the combined setting of multi-object clutter, occlusion, and calibrated multi-view capture that characterizes real laboratory manipulation scenes. To address this gap, we present TrainsBiolab, a real-world RGB-D dataset of cluttered transparent biomedical objects captured as calibrated multi-view sequences. TrainsBiolab contains 161,315 frames from 98 scenes and 1.03M instance annotations over 15 laboratory object types, including 6D poses, full and visible masks, depth, and per-frame camera calibration. The dataset is organized along three axes that reflect operational difficulty: object category, the total number of objects in a frame, and camera viewpoint. We further define dataset-centric benchmarks for segmentation, depth estimation and completion, and 6D pose estimation, and report a system-level robot manipulation evaluation enabled by the released annotations and calibrations. By focusing on repeated transparent instances, clutter, and multi-view laboratory capture, TrainsBiolab provides a resource for segmentation, depth estimation, 6D pose estimation, and multi-view reasoning in autonomous laboratory manipulation. Project page: https://dualtransparency.github.io/TransBiolab/.

Existing robot datasets remain expensive to curate, embodiment-specific, and insufficiently annotated with the fine-grained structure required for generalizable reasoning, execution, or long-horizon environment dynamics simulation. Building on our prior work, RoboInter1.0, we present RoboInter1.5, an extended and holistic suite of intermediate representations for both robotic manipulation and embodied world modeling. RoboInter1.5 provides a unified resource of data, benchmarks, and models centered on dense manipulation-oriented intermediate representations. Specifically, RoboInter-Data contains over 230k manipulation episodes across 571 scenes with dense per-frame annotations covering more than ten types of intermediate representations, including subtasks, primitive skills, object and gripper grounding, segmentation, affordance, grasp poses, contact points, motion traces, etc. Built upon these annotations, RoboInter-VQA introduces spatial and temporal embodied VQA tasks to benchmark and improve the intermediate-representation reasoning capabilities of our RoboInter-VLM. RoboInter-VLA further studies how such representations benefit action execution through implicit, explicit, and modular plan-then-execute paradigms. To better model the physical world, we further introduce RoboInter-World, which leverages intermediate representations as structured conditioning signals for controllable prediction of future world states. Extensive evaluations demonstrate that RoboInter1.5 provides a unified spatiotemporal scaffolding for intermediate representations. Rather than treating intermediate representations merely as interpretable signals, RoboInter1.5 conceptualizes them as a bidirectional interface that both regularizes low-level action spaces and constrains the latent rollouts of open-world physical simulators.

In this manuscript we release two datasets for visual sensing of tomato plants grown in commercial-like settings and acquired using a robot. The first is BUTom21 which consists of still images and manual annotations. The second is BUTom-ST21 which consists of video-based data and semi-automated annotations through AI-based methods, referred to as pseudo-labels. In both cases, we provide pixel-level labels for the ripeness of the fruit. The aim is to provide the research community a challenging set of real-world imagery to explore methods to sense and estimate the state of tomato plants and their fruit, which is an important horticultural crop. Importantly, the spatial-temporal dataset provides individual fruit count and ripeness information enabling researchers to push the boundaries of field-based phenotyping.

Dynamic obstacle avoidance in unstructured outdoor environments remains a critical challenge for autonomous mobile robots, particularly when large-scale robot-specific training data and simulation-based policies are impractical. We present a data-efficient, interpretable method for vision-based dynamic obstacle avoidance that operates entirely on real-world data, avoiding the sim-to-real transfer problem inherent in simulation-trained policies. Our approach leverages UniDepth, a large pretrained monocular depth estimation model, to produce dense depth maps from RGB video without requiring stereo cameras or LiDAR at inference time. Dynamic obstacle avoidance is achieved by extending the SuperPoint and SuperGlue feature correspondence pipeline to track keypoints across long frame sequences, projecting their 2D pixel-space positions into 3D using camera intrinsics and predicted depth, running bundle adjustment initialized from these 3D keypoints, and computing per-keypoint time-to-collision (TTC). A 2D motion primitive in the ground plane is then selected to move the robot away from the closest point of approach of the minimum-TTC keypoint. Evaluated on real-world data from the M3ED dataset, our pipeline achieves a precision of 0.49 and a recall of 0.38 in identifying frames with a ground truth TTC below 1 second, and correctly generates the evasive motion direction in 84% of true positive detections. Crucially, it detects at least one frame with TTC less than 1 second for 20 out of 22 unique physical obstacles present in our test sequences. Unlike end-to-end learned methods that demand thousands of hours of robot-specific training data, our approach eliminates model training entirely, requiring only 74 seconds of data for hyperparameter tuning. This demonstrates exceptional data efficiency while preserving interpretable and generalizable behavior across diverse obstacle types.

Vision-Language-Action (VLA) models are typically trained by imitation learning on large-scale robot demonstration datasets, but more data does not necessarily yield better policies due to redundancy, noise, and uneven coverage. Existing data selection methods often assess demonstrations at either the trajectory or state-action level, missing the reusable structures that compose long-horizon behaviors. In this paper, we propose SIEVE, a structure-aware data selection method for VLA imitation learning. SIEVE views demonstrations as compositions of reusable primitives and transition interfaces. It first discovers visuo-motor primitives from segmented trajectories, then allocates selection budgets to composition patterns by maximizing reuse-aware structural exposure under diminishing returns. Finally, it selects medoid trajectories within each composition-pattern bucket to retain central, stable, and imitation-friendly demonstrations. Experiments across multiple datasets, benchmarks, and VLA models show that SIEVE consistently outperforms competitive data selection baselines. Notably, SIEVE can surpass full-data training while using only 50% of demonstrations and 50% of training steps, suggesting that reusable structure, captured through primitives and transitions, is an important signal for efficient VLA imitation learning.

Despite recent progress of VLA foundation models, the disparity between laboratory conditions and real-world applications continues to impede their practical implementation. To bridge this gap, we present LingBot-VLA 2.0, which advances LingBot-VLA through improvements in three functional domains. (1) Generalization across tasks and embodiments. Compared to the previous version, we revamp the data processing pipeline and curate around 60,000 hours of data for pretraining, including 50,000 hours of robot trajectories spanning 20 robot configurations and 10,000 hours of egocentric human videos. (2) Expanded action space in addition to dual-arm hardware platforms. In particular, our system accommodates degrees of freedom for the heads, waists, mobile bases, and dexterous hands, thereby empowering the robots to tackle more complex tasks in practical scenarios. (3) Predictive dynamics modeling for improved temporal reasoning. Specifically, we formulate future prediction as a proxy task, facilitated by a video representation model for semantic priors and a depth estimation model for geometric cues. Evaluations on the GM-100 benchmark, conducted in a generalist setting, validate the beneficial impact of these proposed modifications. Furthermore, benefiting from the expanded pretraining data that covers whole-body degrees of freedom, LingBot-VLA-2.0 demonstrates strong cross-embodiment long-horizon mobile manipulation capability across the two robotic platforms.

Predicting object dynamics (i.e., world modeling) is a fundamental challenge for robotic manipulation, and modeling deformable objects presents a particularly difficult case due to their high-dimensional state spaces and complex material properties. While current world models approach this through two distinct paradigms: learning the dynamics over the 2D pixel space or more explicit 3D geometric space. A systematic understanding of their relative strengths and limitations remains elusive due to the lack of diverse, large-scale real-world data. To address this, we present Deform360, a large-scale visuotactile dataset featuring 198 daily-life objects, 1,980 interaction sequences, and over 215 hours of observations from 41 surround-view cameras and bimanual tactile grippers to capture both global motion and contact-induced local deformations. Leveraging a novel markerless visuotactile 3D tracking pipeline to extract dense geometry and motion, we systematically evaluate current state-of-the-art world models, comparing 2D video models against 3D particle models. Finally, we provide a preliminary demonstration indicating the real-world applicability of our dataset by performing robot planning tasks on deformable objects. Our analysis reveals key insights into the trade-offs between structural priors and scalability, providing a solid benchmark for future research in generalizable deformable object-centric world modeling. Project website: https://deform360.lhy.xyz

In non-stationary streaming environments, simultaneously adapting to complex, non-linear domain shifts via continual learning while mitigating the catastrophic effects of severe, uncalibrated label noise poses a fundamental mathematical challenge. In this paper, we propose \FlatManifold{}, a novel, streamlined robust continual learning framework that utilizes a Nyström manifold flattening map based on the kernel trick and projection onto an orthogonalized Reproducing Kernel Hilbert Space (RKHS). Unlike traditional methods that rely on complex, error-prone sample-filtering pipelines, the proposed approach exploits the intrinsic mathematical robustness of the flattened space itself. By mapping feature distributions onto a fixed orthogonal target topology with a ridge regularizer, the framework naturally smoothes and counteracts the influence of extreme label noise during the optimization process. Concurrently, catastrophic forgetting is prevented via a continual topology brake term that leverages the covariance matrix of past experiences. Extensive evaluation on real-world multi-session robotics datasets demonstrates that even under severe conditions featuring 40% symmetric label noise, \FlatManifold{} successfully mitigates gradient corruption. Under extreme cross-session domain shifts spanning various seasons and lighting conditions, the proposed framework establishes high generalization capabilities, significantly outperforming standard sequential optimization baselines and proving that structural linearization itself serves as a powerful mathematical barrier against distributed label corruption.

Recent advances in large-scale pretrained vision-language-action models have improved robot policy learning, but directly deploying such policies in user-specific environments remains challenging due to limited generalization, which inevitably requires collecting a dataset tailored to the target environment. Teleoperation yields well-aligned data but is costly and difficult to scale, whereas simulation scales easily but struggles to resemble the target environment and generate task-specific trajectories. To meet both simultaneously, we propose PRISM, an end-to-end pipeline that generates personalized robotic datasets from a single image and a natural-language instruction. PRISM constructs digital cousin scenes that are semantically and geometrically aligned with the user environment yet diverse at the instance level, and synthesizes executable demonstrations without human teleoperation. Extensive experiments show that policies trained on PRISM-generated datasets outperform those trained on baseline-generated datasets on LIBERO and LIBERO-Plus, achieve up to 100% success rate on three real-world manipulation tasks, and maintain stronger performance when evaluated in environments that differ from those seen during training.

Diverse applications for robotics, such as industry and agriculture, require robots to operate across various embodiments, changing visual conditions, and complex planning. Vision-Language Models (VLMs) offer a promising foundation for general-purpose and interpretable robotic reasoning. Aligning VLMs with diverse robot applications requires a modular understanding of the individual decision components that underlie robotic behavior. Capturing such structure is challenging for conventional robot benchmarks that are primarily based on teleoperated, end-to-end datasets. We propose Robot Question Answering (RQA), a modular evaluation framework and RoboVista, a benchmark curated from real robotic systems, research papers, and expert annotations. RoboVista contains 474 Visual Question Answering (VQA) instances with human annotated reasoning and covers 39 unique task types in agricultural, industrial, domestic, surgical robotics, autonomous driving, and open robot datasets. Experiments on RoboVista show that state-of-the-art VLMs exhibit substantial gaps. Physical robot experiments suggest strong correlation between RoboVista performance and real-world task execution.

This work establishes that trigger-word data poisoning of vision language action models is practical, while at the same time the open-source robotics ecosystem holds trust assumptions about community contributions. A few poisoned samples can silently embed a backdoor that disables a robot on command. We evaluate this threat against smolVLA on a real-world pick-and-place task, training on three poison ratios and evaluating across different prompts on the LeRobot platform. Three poisoned episodes in 320 clean episodes suffice for a complete denial of service. Success rate drops to 0.0 plus minus 0.0% across all trigger-word conditions and the robot locks into a fixed joint configuration rather than executing any task-relevant motion. Clean-prompt behaviour holds at approx. 50% success rate across all poison ratios, confirming the attack is stealthy under normal operation. A single poisoned episode already reduces success rate to 6.7 plus minus 6.7%. The robot still moves, but no longer completes the task. The attack generalises to front, middle, and end trigger placements despite training exclusively on front-placed triggers. These findings establish that the threat is practical, low-cost, and stealthy, and warrant treating dataset provenance as a first-class concern in open-source robotics ecosystems.

Vision-Language-Action (VLA) models have shown remarkable promise in generalized robotic manipulation. However, their spatial generalization remains fragile. We argue that simply increasing the number of viewpoints is insufficient. Models often fall into the trap of Shortcut Learning, latching onto spurious correlations (e.g., fixed relative poses between objects or between the camera and robot base) rather than learning true spatial relationships. In this work, we propose a data-centric solution to enhance VLA spatial generalization. We utilize a dual-arm setup where one arm performs manipulation while the other serves as a mobile environmental camera. We systematically evaluate three data distribution patterns: Fixed, Multi-Fixed, and Moving Views. Our findings reveal that a hybrid strategy, combining continuous camera motion with diverse static viewpoints, yields the best performance by substantially reducing spurious correlations while maintaining training stability. Our experiments demonstrate that this strategy mitigates spurious correlations, enabling VLAs to generalize to unseen camera poses and object configurations where simply adding more static viewpoints fails. Crucially, we reveal that the susceptibility to shortcut learning and the struggle with spatial generalization are universal characteristics shared across diverse architectures. Consequently, all evaluated models (ACT, Diffusion, and VLA models including Pi0 and Gr00t) benefit significantly from our mixed data strategy.

Vision-Language-Action models excel at robotic manipulation, driven by the scale and diversity of demonstration data. However, standard training paradigms often cause VLA models to severely overfit to specific behavioral patterns, rendering them unable to generalize to out-of-distribution scenarios even when those scenarios merely require novel combinations of identical sub-skills. While expanding datasets can mitigate this overfitting, acquiring high-quality robot data remains notoriously labor-intensive and cost-prohibitive. To resolve this impasse without expensive human teleoperation and to truly unleash more actions,i.e., enable VLA models to compose known sub-skills into a much broader set of executable behaviors beyond the original demonstrations-we propose ACT-VLA (Action Compositional Training for VLA Models), an offline data augmentation framework that leverages the model's latent task representations to synthesize novel, physically valid demonstrations directly from existing tasks for policy training. By eliminating additional manual data collection, our method automatically expands the training distribution and mitigates overfitting. We evaluate our approach on challenging manipulation tasks in simulation. Experiments demonstrate that while baseline VLA models generalize poorly due to original distribution overfitting, policies trained with our synthesized data achieve substantially higher success rates, validating that leveraging existing tasks for automated demonstration synthesis provides an effective, scalable, and data-efficient route to broadening VLA generalization.

In the field of robot learning, large-scale and diverse demonstration trajectories provide the fundamental basis for enhancing robotic manipulation ability. We introduce RoboTacDex, a large, multi-modal, and diverse dataset of dexterous manipulation behaviors performed with a humanoid robot. Built on the publicly accessible humanoid robot Unitree G1, RoboTacDex consists of 6k trajectories covering 19 tasks, 23 skills, and interactions with 22 objects. RoboTacDex provides comprehensive records including multi-view RGB and depth information, tactile feedback, and detailed semantic annotations. Furthermore, the dataset features a variety of relatively challenging tasks that can only be completed by dual arms and dexterous hands, aiming to mimic human-like operational logic and simulate real-world manipulation complexity. To ensure data collection quality, we develop an improved multi-camera synchronization system to enable millisecond data synchronization and recording of modalities. In our experiments, we evaluate three representative imitation learning models on our dataset, analyzing their performance as well as their respective strengths and limitations across different task categories. Successful trial results and a moderate level of generalization capabilities across a suite of tasks indicate the effectiveness and diversity of the collected dataset. Our dataset will be open-sourced soon.

For robots manipulating open-world objects, tactile representations must generalize to unseen materials. We introduce RCT (Robotic Contact Tactile), a robot-collected touch-vision-language dataset with 29,279 tactile frames from full robot presses on 122 industrial reference materials in 7 categories, recorded with three DIGIT sensors at multiple contact positions. RCT preserves each press as a contact sequence, enabling held-out evaluation across materials, categories, sensors, contact positions, and contact sequences. Frames from one press are strongly correlated: frame-random splits can place near-duplicate observations of the same physical interaction in both training and test. With the encoder held fixed, removing contact-sequence overlap reduces tactile-to-text Recall@1 by 17.7 percentage points. When materials are additionally held out at training time, performance drops sharply, leaving held-out-material Recall@1 at 25.1 +/- 6.1% averaged over three held-out draws. The public TVL/HCT split shows the same structure: every test contact sequence appears in training, and raw-pixel nearest neighbors recover the correct sequence in 98.3% of cases. Uniformly sampling a press improves contrastive training, and RCT-trained embeddings improve category probes on unseen materials. RCT makes contact-sequence-aware, held-out-material evaluation reproducible and exposes novel-material generalization as a central challenge for robotic tactile perception. The RCT dataset is open-sourced at https://faerber-lab.github.io/RCT/

Large-scale demonstration datasets have been central to recent progress in general-purpose robot policies. However, existing datasets are collected in human-absent settings, and policies trained on such data may perform tasks competently in isolation but fail to exhibit human-aware behaviors. To address this gap, we introduce HABIT, a large-scale robot demonstration dataset for human-present environments. We organize tasks into three roles capturing distinct modes of human-robot interaction: Collaborator, where human and robot jointly accomplish a task; Coworker, where they pursue separate tasks in a shared space; and Supervisor, where the human directs the robot. The dataset comprises over 10K episodes and over 160 hours across 60 tasks. Our experiments show that training on human-present data elicits human-aware behaviors that robot-only data fails to produce: spatiotemporal synchronization in Collaborator tasks, yielding in Coworker tasks, and gesture grounding in Supervisor tasks. Moreover, training on HABIT enables rapid adaptation to new human-robot interaction tasks. By introducing human presence as a new axis of dataset diversity, HABIT extends robot policies to environments shared with humans.

Robot manipulation often relies on sensory feedback beyond vision, particularly in contact-rich settings where force, tactile, or audio signals reveal interaction states that are not directly observable from images. However, these modalities are often hardware- and task-specific, and large-scale multisensory robot datasets remain scarce. As a result, it is impractical to pretrain policies with every sensor they may encounter. We study multisensory continual learning: adapting a pretrained robot policy to new tasks with newly introduced modalities while preserving performance under the original sensor suite. We propose MultiSensory World Model (MuSe), which incorporates limited multisensory data into pretrained vision-only policies through multi-stage fusion, multisensory future prediction, and experience replay over pretraining data. We instantiate MuSe by augmenting a pretrained vision-only policy with force-torque sensing and evaluate it on real-world manipulation tasks. Our experiments show that MuSe performs strongly on contact-rich finetuning tasks while preserving, and in some cases improving, performance on the original pretraining tasks. These results suggest that a modest multisensory dataset can improve general robot capabilities beyond the finetuning distribution. Project website: https://jadenvc.github.io/multisensory-continual-learning/

The growing availability of trajectory datasets has fueled major advances in data-driven motion prediction. Yet, models trained on one dataset often fail to generalize beyond their training domain as a result of differences in scene layouts, agent behaviors, and sensing conditions. A framework that learns latent representations of datasets and quantifies their similarity using distributional metrics is presented. This large-scale study covers 24 major datasets, including the most widely used motion-prediction benchmarks, and shows that the resulting transferability scores strongly correlate with cross-dataset model performance. The results provide practical guidance for dataset selection, pretraining, and large-scale foundation models for motion prediction, paving the way toward more generalizable and robust predictive systems.

Cross-embodiment transfer in vision-language-action (VLA) models remains challenging because low-level state and action spaces differ fundamentally across robot platforms. We observe that the high-level cognitive process underlying manipulation, including scene perception, object identification, task planning, and sub-task decomposition, is largely shared across embodiments. Based on this observation, we present ZR-0, a 2.6 billion parameter end-to-end VLA model that uses dense Embodied Chain-of-Thought (ECoT) supervision to align cross-embodiment representations within the vision-language model (VLM). ZR-0 adopts a dual-stream architecture: a pre-trained VLM (System 2) generates structured ECoT reasoning during training, while a Diffusion Transformer-based action expert (System 1) produces continuous action chunks via flow matching. The two components are coupled through cross-attention, with an attention mask that restricts the action expert to input prompt features only, enabling ECoT generation to be entirely skipped at inference without any performance loss. ZR-0 is pre-trained on ProcCorpus-60M, a large-scale dataset comprising approximately 60 million frames (approximately 1,000 hours) from over 400K trajectories, with dense ECoT annotations covering 96.8% of all frames. We evaluate ZR-0 on three simulation benchmarks spanning single-arm (LIBERO), bimanual (RoboTwin 2.0), and humanoid (RoboCasa GR-1 Tabletop) embodiments, as well as real-world experiments on the xArm platform, demonstrating strong performance across all settings. Code and model checkpoints are available at https://github.com/RUCKBReasoning/ZR-0.

This project investigates whether recent Vision-Language-Action (VLA) models can be transferred from controlled research benchmarks to a real-world robotic platform, specifically a UR5e manipulator, in a reproducible and operationally meaningful manner. The work integrates real-robot data acquisition, dataset engineering (compatible with the RLDS format), and the fine-tuning and deployment of OpenVLA and OpenVLA-OFT models, with systematic validation of action representations and control interfaces. The project resulted in several foundational assets: (i) a complete real-robot data acquisition pipeline, (ii) a dataset conversion workflow aligned with RLDS standards, (iii) an initial fine-tuning and inference infrastructure for VLA models, and (iv) a structured set of experimental observations grounded in real-robot trials. These elements collectively establish a reproducible framework for evaluating learning-based manipulation systems beyond simulation. Empirically, the experiments reveal a consistent gap between promising offline indicators and unstable closed-loop behavior on the physical system: this gap cannot be attributed solely to model limitations, it is strongly influenced by action semantics, coordinate frame conventions, temporal alignment between modalities, image preprocessing consistency, and dataset coverage and quality. These observations lead to a key interpretation: the successful deployment of VLA systems in real-world settings depends less on incremental improvements in model capacity and more on precise control of the entire data-model-control pipeline. The project reframes VLA-based robotics from a primarily model-centric challenge to a system-level problem; it highlights the difficulty of running robust task execution on the real robot and provides a clear, experimentally grounded understanding of the conditions required for reliable deployment.

Vision-Language-Action (VLA) models have recently demonstrated strong generalization in robotic manipulation, yet their applicability to whole-body, contact-rich humanoid locomotion remains severely underexplored due to data scarcity, the absence of dynamically consistent demonstrations, and the difficulty of encoding optimality and safety in learning-based pipelines. This work introduces a unified framework WOLF-VLA that integrates whole-body optimal-control (OC) motion synthesis with large-scale multi-modal dataset to train VLAs capable of generating humanoid locomotion policies directly from natural-language instructions. We construct a comprehensive dataset of dynamically feasible humanoid trajectories across six locomotion-related task families, each parameterized by environmental variations, object colors, placements, and visual distractors. We train a VLA model using the collected joint trajectories, ego-centric visual observations and natural language instruction, yielding a policy that exhibits strong reasoning and robustness to initial-condition variability, and competitive performance across several tasks and environment settings. A systematic ablation study demonstrates the impact of each modality on the model performance. The full dataset, model checkpoints, and benchmarking simulation suite will be openly released, establishing a reproducible dynamically consistent benchmark for whole-body humanoid locomotion rich VLA control and enabling future research in scalable transfer of instruction-driven locomotion policies.

Occupancy prediction at voxel-level granularity is essential for safe robotic navigation and interaction in complex environments. Existing occupancy datasets, however, are predominantly designed for autonomous driving with vehicle-centric biases -- forward-facing cameras, far-field geometry, and static road priors -- limiting their applicability to embodied humanoid perception. We present Humanoid-OmniOcc, a large-scale panoramic stereo-based occupancy dataset tailored for humanoid robots. The dataset encompasses 15 diverse simulated indoor scenes and 5 real-world environments, yielding over 155K samples with broad scene and style diversity. Importantly, the dataset is designed around a Real2Sim2Real closed-loop paradigm: real sensor specifications drive physically accurate simulation, simulation produces large-scale annotated training data, and models trained in simulation are directly evaluated on real-world captures -- enabling iterative refinement of the sim-to-real pipeline. We further propose \textbf{H}umanoid \textbf{S}urround \textbf{S}tereo-guided \textbf{Occ}upancy model (Humanoid-OmniOcc) that exploits robust depth priors for accurate 2D-to-3D lifting. Extensive experiments show that Humanoid-OmniOcc consistently outperforms monocular baselines and generalizes well to both unseen simulated test scenes and real-world environments, validating the effectiveness of the Real2Sim2Real design. Code and data will be available upon acceptance at https://d-robotics-ai-lab.github.io/humanoid-omniocc.

Recent advances in robot world models enable synthetic video generation for embodied prediction and planning. However, evaluating these videos is challenging: visually realistic outputs often violate physical laws, temporal consistency, or task logic, while conventional metrics and monolithic Vision-Language Model (VLM) judges fail to generalize or provide precise diagnostic value. We present RoboGaze, a training-free, multi-agent VLM framework that provides structured, interpretable evaluation for generated robot-manipulation videos. Given a task instruction and video, RoboGaze operates via a three-stage pipeline: task-scene grounding, dimension-specific specialist routing, and critic-based verification. It outputs temporally localized glitch reports categorized under a novel 6-dimension, 30-type robotics-specific taxonomy. To benchmark RoboGaze, we introduce a human-validated dataset of 382 clips spanning simulated and real-world multi-view manipulation. Evaluating eight open-source and proprietary VLM backbones, RoboGaze dramatically outperforms zero-shot baselines, improving description-F1 by up to +43 points and temporal alignment (F1 x IoU) by up to +37 points, closing approximately 85% of the gap to the human ceiling. Furthermore, its critic verifier mitigates the "cry-wolf" false-positive flaw of standard VLMs, lifting clean-clip accuracy from under 25% to over 80%. RoboGaze offers a scalable, highly interpretable diagnostic tool for the rigorous evaluation of robot world models.

Deploying generalist robotic agents in the real world requires transferable skills. Specifically, a policy trained to clone a behavior from object-specific demonstrations must generalize beyond that object, otherwise data collection requirements become intractable. Recently, fine-tuning of pre-trained billion-parameter Vision-Language Models (VLMs), initially on large-scale robot datasets and then on fewer scenario-specific demonstrations, has emerged as the predominant paradigm for designing Vision-Language-Action (VLA) models. While these policies achieve state-of-the-art manipulation performance in-distribution, they remain brittle to minor spatial, semantic, and task variations. In this work, we address the inability of current models to decouple the declarative (i.e., concepts and entity semantics) from the procedural knowledge (i.e., how to do something) encoded in their parameters, which is a fundamental bottleneck for zero-shot skill transfer to novel objects. To address this, we propose w$^{2}$VLA, a new VLA model with restructured information flow. Rather than feeding all multimodal tokens from the VLM encoder into a large, opaque transformer-based action expert, our approach modulates the robot state sequence with visual, spatial, and skill information in a compositional and interpretable manner. Unlike popular, state-of-the-art VLAs, we show that our modular approach successfully decouples knowledge representations, enabling robust behavior cloning and unprecedented zero-shot skill transfer capabilities across dissimilar, unseen objects.

Embodied Foundation Models (EFMs) integrate multimodal understanding, future-state reasoning, and executable robot actions. Yet their safety alignment for human-injury prevention remains underexplored, primarily because real-world data of robots harming humans or creating hazardous household situations cannot be safely or ethically collected. To address this challenge, we propose a safety-critical data construction pipeline for human-injury prevention in EFMs.Starting from real DROID observations, our construction pipeline proceeds through scene understanding, hazard-aware image editing, temporal prompt generation, and single-pass rollout synthesis. The temporal prompts specify the expected scene evolution, while Wan2.7 synthesizes realistic robotic rollouts from the edited hazardous states in a single pass. Using this pipeline, we construct ROBOSHACKLES, a 10,000-clip robotic video dataset derived from real DROID observations, spanning two direct-harm and four indirect-harm categories. To ensure dataset quality, we assess task completion and visual quality with automatic metrics, and evaluate six representative EFMs under a refusal-based safety criterion. Results show that all evaluated models produce unsafe actions in the tested safety-critical scenarios, yielding a 100% unsafe action generation rate. ROBOSHACKLES serves as a scalable benchmark and training resource for refusal learning and hazard anticipation before robot action execution.The dataset is publicly available at https://huggingface.co/datasets/YZW00/RoboShackles.

Vision-language-action models (VLAs) combine vision-language backbones with expressive generative action heads trained via flow matching on large-scale robotic datasets. Despite their strong empirical performance in robotic manipulation, VLAs lack mechanisms to quantify confidence in their predictions and to detect when their actions may be unreliable. This presents a critical limitation for real-world deployment in non-stationary environments, where models inevitably encounter scenarios outside their pretraining distribution and may fail without warning. To address this, we derive an efficient method for quantifying epistemic uncertainty in flow-matching models by leveraging velocity-field disagreement (VFD) across a small ensemble. We successfully use this uncertainty estimate for failure detection during deployment and active fine-tuning of flow-based VLAs. To this end, we propose SAVE, a framework for uncertainty-guided active multitask fine-tuning that reduces the number of costly expert demonstrations required to adapt VLAs to new tasks. Through extensive experiments on the LIBERO benchmark, we demonstrate that VFD yields better-calibrated uncertainty estimates predictive of downstream performance, that VFD achieves strong performance in detecting failures, and that uncertainty-guided data acquisition with SAVE requires at least 22% fewer samples than baselines. In summary, our work shows that quantifying epistemic uncertainty in flow-based VLAs improves both failure awareness and adaptation. Project website: tum-lsy.github.io/uq_vla/.

Humans naturally leverage diverse sensing modalities to interact with the physical world, while most Vision-Language-Action (VLA) models for robotics rely solely on RGB observations. This limits their ability to perceive physical properties that are difficult or impossible to infer from RGB cameras, such as temperature, sound, or radar response. We present MuseVLA, an adaptive multimodal sensing VLA model that integrates novel sensors as on-demand tools for robotic manipulation. Given a task instruction and visual context, MuseVLA first generates a sensor token and target description that select the sensing modality to invoke and what to attend to, analogous to a tool call with arguments. It then converts the selected sensor measurement into a grounded sensor image, a unified intermediate representation that encodes heterogeneous readings for multimodal fusion and action generation. This design decouples sensor-specific processing from the VLA backbone, enabling efficient integration of diverse modalities. To reduce the need for expensive multisensory robot datasets, we further introduce a data synthesis pipeline that augments existing RGB video datasets with grounded sensor images, enabling generalization to unseen sensor-guided tasks. We evaluate MuseVLA on a real-world robot across challenging dexterous hand manipulation tasks that require multimodal sensing inputs, including temperature-guided pick-and-place, audio-driven object search, and radar-assisted hidden object retrieval. MuseVLA achieves 80.6% success rate on average, outperforming RGB-only and multisensory VLA baselines significantly, and exhibits strong zero-shot capabilities on unseen tasks.

Diffusion-based Vision-Language-Action (VLA) policies enable strong generalization in robotic manipulation, but remain sensitive to spurious visual correlations and noisy action generation, leading to brittle behavior under perturbations. We introduce Selected Diffusion Noise (SDN), a simple, training-free test-time method that improves both robustness and success rate by leveraging the diffusion noise space as a controllable degree of freedom. SDN dynamically samples noise vectors that are maximally separated from a reference set to mitigate reliance on spurious cues, while selecting candidates that yield more coherent action trajectories. This dual objective encourages stable behavior even under object-masked observations and reduces action jitter without modifying model parameters. We evaluate SDN on two simulation benchmarks (Google Robot, Widow-X) and two real-world robotic datasets across multiple VLA policies, including pi_0, Groot-N1.5, and Groot-N1.6. SDN consistently improves success rates by +8% in simulation and +10% in real-world settings, while producing smoother and more stable actions. Our results highlight that diffusion noise selection can serve as an effective and general mechanism for enhancing VLA policies at test time.

Generalist policies can learn a wide range of skills from diverse robot datasets. In order to solve or improve on challenging new tasks, we need a way to infer and invoke the appropriate actions from the policy's rich behavioral prior, especially when directly commanding the policy fails. We focus on flow matching generalists and propose Flow Reversal Steering (FRS): a method that takes suboptimal but ``reasonable'' actions, finds their latent noises by passing them through the flow policy in reverse, and maps them to nearby generalist action modes. We evaluate FRS across many simulated and real-world manipulation settings. First, FRS can turn coarse semantic guidance from humans or vision-language models (VLMs) into corresponding good robot actions, improving zero-shot control. These gains can be distilled with behavioral cloning by training an auxiliary policy to output noises that the generalist maps to good actions -- showing up to 95% absolute task success rate boosts in under a minute of training. Finally, FRS enables policy improvement by bootstrapping reinforcement learning with semantic knowledge, improving on several tasks that standard RL fails to improve on.

The recent trend in scaling models for robot learning has resulted in impressive policies that can perform various manipulation tasks and generalize to novel scenarios. However, these policies continue to struggle with following instructions, likely due to the limited linguistic and action sequence diversity in existing robotics datasets. This paper introduces Task Robustness via Re-Labelling Vision-Action Robot Data (TREAD), a scalable framework that leverages large Vision-Language Models (VLMs) to augment existing robotics datasets without additional data collection, harnessing the transferable knowledge embedded in these models. Our approach leverages a pretrained VLM through three stages: generating semantic sub-tasks from original instruction labels and initial scenes, segmenting demonstration videos conditioned on these sub-tasks, and producing diverse instructions that incorporate object properties, effectively decomposing longer demonstrations into grounded language-action pairs. We further enhance robustness by augmenting the data with linguistically diverse versions of the text goals. Evaluations on LIBERO demonstrate that policies trained on our augmented datasets exhibit improved performance on novel, unseen tasks and goals. Our results show that TREAD enhances both planning generalization through trajectory decomposition and language-conditioned policy generalization through increased linguistic diversity.

Visual-language action (VLA) models enable robots to predict actions directly from observations and language instructions, but their performance depends on large-scale, high-quality data and is limited by the scarcity of real-world robot action datasets. To facilitate VLA model learning with abundant unlabeled human videos, Latent Action Models (LAM) learn latent action representations from visual dynamics to provide additional supervision for VLA learning. However, LAM and VLA are typically trained separately, leaving LAM ungrounded during VLA training and VLA models constrained by frozen LAM representations. To address these issues, we propose Latent Action Representation Alignment (LARA), a plug-and-play framework that jointly optimizes LAM and VLA via representation alignment. This enables reciprocal benefits where LAMs learn with action trajectories to avoid spurious visual changes, while VLAs are regularized by forward dynamics learned within LAMs to reduce hallucinations of functionally ineffective trajectories. We demonstrate LARA versatility and effectiveness for pre-training, post-training enhancement of pre-trained VLA models, and LAM refinement, achieving an average of ~10%, ~5%, and ~15% improvement over 3 simulation and 1 meticulously designed real-world robotic manipulation benchmarks.

Universal Manipulation Interface (UMI) enables scalable real-world robot data collection without hardware-specific teleoperation, yet leveraging UMI data to train large-scale Vision-Language-Action (VLA) models remains fundamentally challenging. We identify two critical mismatches: wrist-mounted fisheye views, with severe radial distortion and local gripper-centric perspectives, are out-of-distribution for pretrained VLMs; and human-collected trajectories frequently violate kinematic limits, incur collisions, or exceed controller bandwidth, teaching VLA policies physically infeasible actions. To address the challenges, we present VISTA, a framework that bridges this dual gap through three synergistic components. (i)~UMI-VQA, the first large-scale VQA dataset tailored to wrist-mounted fisheye observations, aligns VLM representations to the distorted visual regime via auxiliary vision-language supervision. (ii)~A systematic physical-validation pipeline performs a data-completeness pre-check and scores each valid trajectory for trajectory continuity, self-collision risk, and execution fidelity before it enters training. (iii)~A two-stage co-training recipe jointly learns vision-language grounding on UMI-VQA and action prediction on validated trajectories. Our experiments empirically show that incorporating UMI-VQA consistently improves downstream policy performance, and that physical-validation scores are strongly predictive of deployment success. On diverse simulation and real-world manipulation tasks, VISTA significantly outperforms strong baselines including $π_{0.5}$, LingBot-VLA, and Wall-X. We release the physical-validation pipeline, UMI-VQA, validated trajectory data, and the pre-trained model for the community.

Existing datasets cannot support large-scale learning in multi-agent, multi-sensor, or multi-domain autonomy, where diversity and coordination are essential. We present a modular dataset generation pipeline that creates terabyte-scale, ground-truth-labeled data for ground, aerial, and infrastructure-based systems using the AVstack framework and CARLA simulator. Supporting single- and multi-agent configurations with flexible sensor suites, the pipeline enables controllable experimentation across challenging conditions. Representative perception and fusion studies show how generated data can support application-specific training and collaborative autonomy.

Vision-language-action (VLA) models are promising for diverse robotic tasks, but their performance heavily depends on large-scale high-quality training data, whose collection on real robots is costly and time-consuming. While prior work has explored augmenting manipulation datasets with egocentric human videos, applying such approaches to mobile robot navigation remains challenging due to viewpoint changes during locomotion. In this paper, we propose a framework that converts egocentric walking videos into datasets for mobile robot imitation learning. The proposed method estimates camera motion from human videos and transforms it into action representations compatible with ground mobile robots. By jointly training a VLA model on human-derived and robot-collected datasets, the model achieves improved language understanding and more robust action generation than training with either data source alone. Experiments on a fruit-search navigation task demonstrate that human egocentric videos provide an effective and scalable data source for mobile robot learning.

Robotic systems generate large volumes of multimodal sensor data, but converting ROS bag recordings into machine learning datasets is often handled by ad hoc sequential scripts, creating engineering overhead and slow iteration cycles. We model dataset construction as an artifact-based build process over a dependency graph and implement this approach in Bagzel, an open-source Bazel extension for reproducible, incremental dataset generation (including nuScenes-format export). We compare Bagzel and Bagzel-xattr (server-side digest management) against a sequential rosbag2nuscenes baseline. Bagzel reduces runtime in all evaluated execution modes, with the largest gains in iterative workflows (up to 386.26x in warm builds and 7.21x in incremental builds on a 20.4 GB dataset). Across dataset sizes from 5.1 to 20.4 GB, Bagzel variants show markedly better scaling behavior than the baseline, especially in warm and incremental modes. Bagzel-xattr provides additional gains, with a mean runtime reduction of 5.9% compared to Bagzel in the input granularity study. Overall, modeling robotics dataset construction as an artifact-based build process substantially reduces dataset update latency while maintaining a deterministic build design that supports reproducibility. Bagzel is publicly available at https://github.com/UniBwTAS/bagzel.

Embodied Vision-Language Models (VLMs) have demonstrated impressive performance and generalization in robotics, particularly within Vision-Language-Action frameworks. However, a significant gap remains between the high-level semantic focus of standard text-guided pre-training paradigms and the low-level spatial and physical knowledge critical for execution in embodied environments. In this paper, we introduce GEM, a Generative-supervised Embodied vision-language Model designed to bridge this divide. We propose integrating a depth map generation task directly into the VLM pre-training phase. By training this generative objective jointly with the main model, we observe substantial improvements in embodied intelligence, significantly enhancing both semantic understanding and physical operation capabilities. To support this paradigm, we curate and release GEM-4M, a comprehensive large-scale dataset featuring a mixture of grounding, reasoning, and planning data paired with high-quality depth supervision. Extensive experiments demonstrate that GEM achieves state-of-the-art results across diverse embodied benchmarks. Furthermore, our deployed action model, GEM-VLA, exhibits vastly superior task execution abilities in both simulation environments and real-world evaluations. Code, models, and datasets are available at https://zhaorw02.github.io/GEM/

Vision-Language-Action (VLA) models demonstrate promising generalization in robotic manipulation, driven by advances in large-scale vision and language pre-training. This progress can be misleading. Despite the zero-shot perception and language capabilities of VLAs, their overall task performance often degrades under distribution shifts, revealing gaps in how these systems translate high-level understanding into robust behavior. To systematically study this gap, we introduce Colosseum V2, a large-scale simulation benchmark for evaluating VLA generalization in robot learning across diverse conditions. The benchmark comprises 28 tasks spanning 13 task categories and two robot morphologies, covering a wide range of manipulation primitives and long-horizon behaviors. Built on the ManiSkill simulator, Colosseum V2 enables fast, GPU-parallelized evaluation and supports both in-domain and out-of-domain testing at scale. We evaluate state-of-the-art methods, including Action Chunking Transformers (ACT) and Pi0.5, and reveal limitations in both base performance and generalization. We demonstrate strong correlations between simulation and real-world metrics that support the ecological validity of the benchmark. By standardizing tasks, metrics, and evaluation protocols within a unified benchmark, Colosseum V2 enables reproducible and fair comparisons, reduced evaluation overhead, and accelerated progress toward general-purpose robot policies.

Success in generative modeling across language, image, and video demonstrates that large, well-curated datasets are the key driver for building capable models. 3D Human motion, however, has lagged behind, constrained by an unsatisfying choice between small, high-fidelity motion capture datasets and large-scale in-the-wild collections dominated by static or low-quality sequences. We introduce RoMo, a rich, large-scale, carefully curated dataset of in-the-wild human motions that resolves these tradeoffs. To ensure quality, we introduce a taxonomy-aware filtering pipeline that aggressively removes static and artifact-prone sequences. Every sequence is annotated with detailed captions and organized by a novel three-level semantic taxonomy. This hierarchical structure enables fine-grained, per-category evaluation, that reveals model strengths and weaknesses obscured by global metrics. We demonstrate that models trained on RoMo achieve state-of-the-art fidelity and diversity while gaining a superior understanding of complex, subtle text prompts. Finally, we release the Motion Toolbox to standardize metrics, data conversion, and visualization, establishing a foundation for reproducible and interpretable motion generation research.

Embodied Question Answering (EQA) connects perception, reasoning, and interaction within embodied environments. However, existing datasets and benchmarks remain fragmented, each focusing on a limited subset of reasoning skills such as spatial understanding or procedural reasoning, without offering a unified large-scale framework for comprehensive evaluation. We present EQA-Decision, a large-scale embodied QA dataset that systematically covers four complementary dimensions of embodied reasoning: static scene construction, spatial understanding, task dynamics reasoning, and instant decision. The dataset contains over four million question-answer pairs with hierarchical annotations across diverse embodied scenarios. In addition, we develop RoboDecision, a strong baseline model aligned with the EQA-Decision Benchmark, providing a unified framework that jointly evaluates perception, reasoning, and action-level decision-making in embodied environments. Results demonstrate that EQA-Decision effectively benchmarks and enhances VLM capabilities in spatial and interaction reasoning, providing a solid foundation for advancing embodied intelligence research.

Existing embodied control research demonstrates remarkable performance improvements by scaling training data and model size. We instead explore inference-time strategy as an alternative axis. Non-deterministic generative models, such as diffusion and autoregressive models, have been widely adopted in the field of embodied control. However, the single-shot inference paradigm limits their performance. In this paper, we propose \textbf{TapSampling}, a plug-and-play framework for inference-time sampling. First, we introduce an Action-VAE that represents actions in a low-dimensional latent space by mapping policy-generated initial actions into a compressed posterior distribution, from which any number of latent samples can be drawn and decoded into candidate actions that approximate the true action distribution. Second, we formulate action verification as task-progress outcome prediction, using the intrinsic sequential structure of robotic datasets to train a semantically grounded verifier for interpretable action selection. Furthermore, TapSampling is a policy-agnostic framework. Extensive experiments in both simulated and real-world environments demonstrate that our method substantially improves multiple generalist policies without further policy finetuning. Code and models are available at the project page.

World models are central to building agents that can reason, plan, and generalize beyond their training data. However, research on world models is currently fragmented, with disparate codebases, data pipelines, and evaluation protocols hindering reproducibility and fair comparison. Current practice is further limited by three key bottlenecks: fragile one-off codebases, slow video data loading, and the lack of standardized generalization benchmarks. We present stable-worldmodel (swm), an open-source platform for standardized and reproducible world modeling research and evaluation. It delivers (1) a high-performance Lance-based data layer with native support and conversion tools for MP4, HDF5, and LeRobot datasets, (2) clean, well-tested implementations of modern world model baselines and planning solvers, and (3) a broad suite of environments and tasks extended with controllable visual, geometric, and physical factors of variation for systematic in-silico evaluation of dynamics understanding, control performance, representation quality, and out-of-distribution generalization. By unifying the full pipeline under a single, scalable framework, \texttt{swm} dramatically reduces research overhead and accelerates trustworthy progress toward reliable world models.