Local Camera Pose

Real-world perception systems must adapt to changing environments, but manual image annotation cannot scale to field data volumes. We present BirdsEye, which shifts expert annotation from images to the field: an operator records target locations in world coordinates using RTK positioning and calibrated projective geometry propagates each observation to all frames where the target is visible. To quantify how well physical annotations align with image observations, we derive a first-order mapping from camera-pose uncertainty to pixel uncertainty and validate it against Monte Carlo simulation. This mapping is linear in the six per-axis pose variances, so it inverts into a sensor design tool: we give a sufficient condition converting an annotation tolerance into a convex set of admissible pose-noise budgets, a closed-form largest admissible scaling of a deployed sensor suite, and a unique per-axis pose specification under an equal-budget-share allocation. We also analyze the planar-surface approximation underlying the projection, which holds up to 10 degrees of terrain slope. By direct measurement, we show that system projection accuracy is sub-decimeter (sub-30 pixel) at AGL altitudes of 10-20m under conditions excluding sustained yawing. During an in-field case study across three agricultural sites, two field workers produced 12,524 annotated frames carrying 55,600 labels in roughly 12 hours (25.5x per-worker rate increase over manual labeling). Detectors trained on imagery collected by this workflow recovered 56-89% of in-view surveyed targets at a geographically distinct farm, at pre-registered operating points; human review of the leading configuration estimates detection precision at 83-87%, spanning three tie-break conventions for clusters carrying contradictory human verdicts.

Active perception is essential for robotic manipulation when fixed viewpoints leave task-relevant information occluded or unobserved. However, enabling vision-language-action (VLA) models to reason across changing viewpoints and actively acquire informative observations remains challenging. We present ActiveScale, a framework that advances active perception through coordinated model, data, and hardware designs. Our model augments a VLA with historical video observations and explicit camera-pose supervision, using per-frame pose tokens and a lightweight prediction head to associate observations across viewpoints and support a coherent understanding of the scene. To learn from the camera motion naturally present in human activity, we introduce a scalable human--robot mid-training recipe using 1000 hours of egocentric and robotic data, adapting the model to temporal inputs and pose supervision. We further introduce Active-perception Mobile-manipulation Platform (AMP), a robotic platform that supports active perception and mobile manipulation through single-operator teleoperation, enabling scalable collection of demonstrations that coordinate viewpoint changes and manipulation. Experiments demonstrate improved success rates on active-perception tasks, while ablation studies validate the contributions of camera-pose-aware modeling and egocentric mid-training. Together, these components provide an integrated foundation for studying and developing active perception in robotic manipulation.

Camera pose estimation is a key step in 3D reconstruction and view-synthesis pipelines. We present a deep, global Structure-from-Motion framework based on learned view-graph aggregation. Our method employs a permutation-equivariant, edge-conditioned graph neural network that takes noisy pairwise relative poses as input and outputs globally consistent camera extrinsics. The network is trained without ground-truth supervision, relying solely on a relative-pose consistency objective. This is followed by 3D point triangulation and robust bundle adjustment. Our approach is efficient, scalable to more than a thousand images, and robust to graph density. We evaluate our method on MegaDepth, 1DSfM, Strecha, and BlendedMVS. These experiments demonstrate that our method achieves superior rotation and translation accuracy compared to deep track-centric methods while registering more images across many scenes, and competitive results compared to state-of-the-art classical pipelines, while being much faster.

3D Gaussian Splatting (3DGS) enables photorealistic real-time novel view synthesis, yet placing a virtual camera to capture a desired frame remains largely manual. Existing language-guided approaches in 3D scenes mainly focus on object-centric grounding, determining what to observe but rarely controlling how it should appear in a single frame, such as subject orientation or frame layout. To address this limitation, we introduce a new task, Text-Instructed Viewpoint Grounding (TIVG), which aims to identify a 6-DoF camera pose in a 3D Gaussian scene whose rendered frame aligns with a text instruction. To solve this task, we propose CapFrame, a partially differentiable framework that converts language into geometric pseudo labels for camera pose optimization. CapFrame follows a Retrieve-Translate-Refine pipeline: it retrieves relevant views and ranks them through a Question-Evaluation process with MLLMs, translates the instruction into orientation and layout pseudo labels, and refines the camera pose via differentiable optimization with layout and orientation losses in 3DGS. Experiments on 38 real-world scenes with 135 instructions indicate that CapFrame produces viewpoints better aligned with texts than heuristic viewpoint search and adapted trajectory generation baselines, validated by VLM metrics, MLLM judges, and user studies. Code is available at: https://github.com/jirongli/CapFrame

Visual foundation models are a cornerstone of image and video understanding but typically require large amounts of data and computation. The current scale required for pretraining visual foundation models may be unsustainable or unnecessary, and significant benefits arise when effective models can be obtained with fewer resources. To better understand how self-supervised learning (SSL) objectives behave under resource constraints, we conduct a controlled study of image and video SSL objectives under matched data, architecture, and compute budgets. We compare contrastive, reconstruction, feature-prediction, and diffusion objectives and evaluate both standalone and jointly trained image-video SSL formulations across a diverse set of image and video understanding tasks. Our results show that DINOv2-style pretraining consistently provides the strongest overall performance under limited resources. Furthermore, combining DINOv2 with video SSL objectives such as VideoMAE substantially improves image classification and segmentation performance, but degrades video tracking and camera-pose estimation performance, revealing an important tradeoff between semantic and geometric representation learning. These findings suggest that combining image and video SSL objectives can be beneficial in resource-limited settings, while highlighting the need for improved methods that better balance semantic, temporal, and geometric supervision.

Despite substantial progress in visual localization, from scene coordinate regression to direct camera pose regression, achieving both robust generalization and high accuracy remain challenging. This study introduces GS-CPE (Gaussian Splatting based Camera Pose Estimation), a coarse-to-fine framework for 6-DoF camera pose estimation that unifies geometry-based coarse pose estimation with robust 3D Gaussian Splatting (3DGS) warping based pose refinement. GS-CPE first estimates a coarse pose via retrieval-guided geometric pose estimation on a 3DGS scene representation, then refines it by minimizing a visibility aware masked RGB warping objective in a multi-scale optimization framework, with adaptive re-rendering. Extensive experiments on indoor and outdoor benchmarks including 7Scenes, Cambridge Landmarks, FAST-LIVO2 datasets, and a custom dataset demonstrate state-of-the-art performance, consistently outperforming in both accuracy and generalization.

Camera localization in bronchoscopy remains a challenging problem due to stringent accuracy requirements, real-time constraints, and limited training data. Compared to natural scenes, the confined anatomical structures demand millimeter-level precision, while intraoperative guidance necessitates low-latency inference. However, existing methods often fail to effectively exploit preoperative geometric priors, limiting their robustness and accuracy. To address these limitations, we propose a unified geometry-aware bronchoscope localization framework (GABL) that effectively fuses preoperative structural priors with paired intraoperative video to estimate 6-DoF camera poses. Specifically, to address visual ambiguity in complex airways, we propose a graph-guided coarse-to-fine localization scheme that effectively leverages structural priors for precise pose estimation. Furthermore, to mitigate pose jitter and bridge the visual-structural gap, we integrate a Transformer-based tracking model with a novel RGB-depth matching objective, jointly enforcing spatio-temporal and geometric consistency. Extensive experiments demonstrate that our method yields remarkable reductions of 8.37% and 31.76% in translation and rotation errors over the prior state-of-the-art, alongside 4 times inference speedup (33.6 FPS) for robust real-time bronchoscope localization. Project website: https://paulili08.github.io/GABL/.

Visual imitation learning enables robots to acquire visuomotor skills directly from images, yet RGB observations lack explicit geometric cues, making learned policies brittle to camera perturbations. To address this, we propose \textbf{Ray-conditioned Vision Transformer Encoder (RayViT)}, a lightweight architecture that injects camera geometry into pretrained ViT backbones. RayViT represents camera geometry as a Plücker ray map, patchifies it into ray features, and uses gated cross-attention to produce a ray-conditioned class token. These ray features are added as dense positional embeddings, while the ray class token replaces the original ViT class token to provide a geometry-aware summary representation. We combine this approach with an auxiliary cosine similarity loss to consistently improve the performance and robustness for geometry-aware tokens. Experiments on sim- and real-robot tasks demonstrate that RayViT improves robustness by approximately 13 percentage points under camera perturbations in multi-task RoboCasa benchmark and by 1.78 average completed stages in real-world multi-task success rate compared to baselines.

Monocular depth estimation is a fundamental prerequisite for 3D reconstruction and autonomous navigation in Unmanned Aerial Vehicles (UAVs). In practical deployments, UAVs operate under highly dynamic camera poses characterized by continuous variations in height, pitch, roll, and field of view (FOV). Existing monocular depth estimation methods frequently fail to generalize across such diverse perspectives and the expansive scale of depth distributions inherent in aerial scenes. To address these challenges, we establish a quantitative representation of UAV viewing angles through rigorous theoretical analysis, deriving the geometric correspondence between viewing angles and view distances using the ground plane as a reference for observation. Building upon this, we propose Depth Estimation for Any Perspectives Model (DAPM), representing the first monocular framework specifically designed for UAV aerial imagery to jointly estimate camera pose and depth under continuously varying viewpoints. Specifically, we introduce an Ideal Ground Depth (IGD) module that leverages the derived geometric relationships between UAV perspectives and view distances to implement dense camera-pose supervision and enhance depth features. And we further develop a coarse-to-fine Progressive Quantization Bins (PQB) module. By incorporating progressive supervision and hierarchical quantization bins, the PQB module enables robust estimation in complex UAV aerial imagery. To evaluate the proposed framework, we present the UAV Any Perspectives Depth (UAPD) dataset, featuring comprehensive and continuous distributions of pose parameters. Experimental results on UAPD demonstrate that DAPM achieves state-of-the-art performance across both depth and camera-pose estimation metrics. The source code and datasets are available at: https://github.com/ThisIsLT/DAPM.

Localizing nearby humans and estimating their facing direction are key capabilities for safe navigation and socially aware human-robot interaction. Many pose-estimation pipelines target cameras and 3D LiDAR or assume GPU-class compute, whereas service robots are often equipped only with omnidirectional planar LiDARs and modest onboard processors. We address omnidirectional human detection and relative 2D pose estimation from planar LiDAR sequences with a lightweight network based on Space-Time Blocks, which explicitly separate spatial processing along scan rays from temporal aggregation across scans. Our network processes 360° LiDAR sequences to output per-ray human presence, distance, and relative orientation. We train it via cross-modal self-supervision from a narrow RGB-D body tracker in the sensors' overlap region, removing the need for manual LiDAR labels. Quantitative experiments show that our approach consistently outperforms a parameter-matched baseline model, reducing errors in distance (-38%), position (-28%), and orientation (-15%). We further benchmark on the public FROG dataset, report real-time CPU inference on a service robot, and validate with in-field demonstrations, supporting its suitability for spatial perception on computationally constrained service robots.

Novel View Synthesis (NVS) enables the generation of unseen views of a scene from a single or multiple images, allowing users to freely explore an object from any viewpoint. Despite the recent impressive qualitative improvements of generative models for this task, existing methods struggle to provide global and intuitive control of target viewpoints because they either use input-relative camera poses or are limited to generating sparse global views. This lack of global pose control severely limits the number of downstream tasks potentially enabled by NVS. To address this limitation, we propose a novel approach for precise camera control in a customizable Normalized Object Coordinate Space (NOCS), requiring single or few unposed images. Our method operates solely on the absolute camera pose of the target view in NOCS, eliminating the need for a relative world frame or camera poses of the input images. Unlike previous methods that treat NVS as a standalone generation task, we formulate it as an image editing problem and build upon state-of-the-art editing models to leverage their superior generalization capability. Camera information is injected as dedicated camera tokens via an in-context multi-modal conditioning strategy. To alleviate the inherent ambiguity of NOCS, we incorporate text descriptions that explicitly define the object's canonical coordinate frame, which also enhances generalization to unseen object categories. Furthermore, we curate a high-quality dataset with consistently aligned orientations and corresponding NOCS text definitions. Extensive experiments demonstrate that our method robustly generates novel views with accurate and consistent orientations from arbitrary unposed images across diverse categories, achieving state-of-the-art image quality and fidelity.

The remarkable scalability of Transformers has expanded their application to 3D computer vision, where camera-aware positional encoding is crucial for providing spatial cues in multi-view geometry. Recent advancements have established the practice of using camera parameters -- such as extrinsics or projection matrices -- as relative positional encoding into the query, key, and value vectors of the attention mechanism. However, when scaling up the training recipe of novel view synthesis (NVS) models with the camera-based positional encoding, we observe a significant issue: model performance stagnates in the late stages of training. In this paper, we investigate the cause of the performance bottleneck when scaling up and demonstrate that storing rotation and translation given by the positional encoding in the same dimensions of the value vector causes indeterminacy in their independent identification, hindering training scalability. To address this, we propose Decoupled Pose Positional Encoding (DPPE), a novel camera-based positional encoding that explicitly decouples rotation and translation. Extensive evaluations on NVS tasks demonstrate that DPPE enables stable long-term training even in scaled-up training setup. Furthermore, it exhibits superior generalization performance in extrapolation settings, such as handling an increased number of viewpoints and zoom-in scenarios.

Scaling monocular 3D Gaussian Splatting (3DGS) SLAM to kilometer-level outdoor environments poses two tightly coupled challenges: fragile long-term pose tracking and excessive memory overhead during large-scale mapping. In this paper, we propose KiloGS-SLAM, a highly efficient and robust monocular 3DGS-SLAM system that jointly addresses both bottlenecks. Since high-fidelity scene reconstruction fundamentally relies on drift-free camera poses, we first introduce a motion-adaptive hybrid tracking module. This module features a condition-triggered three-tier solving pipeline. It dynamically switches between Essential matrix and PnP models to handle geometric degeneracies. An on-demand foundation model can also be activated to rescue the trajectory from catastrophic drift. To ensure the system can sustain these long trajectories without memory exhaustion, we subsequently design a lifecycle-managed Gaussian mapping strategy. By integrating probabilistic initialization with chunk-based multi-view densification and pruning, this full-pipeline optimization effectively reduces primitive redundancy while preserving high-frequency details. Together, the robust tracking guarantees the geometric foundation required for accurate mapping, while the memory-efficient lifecycle-managed mapping enables large-scale operation. Extensive experiments across three challenging outdoor datasets demonstrate that our approach achieves state-of-the-art tracking accuracy and rendering quality, successfully scaling to sequences of over 10,000 frames on a single GPU.

Metric feed-forward 3D reconstruction for panoramic data remains under-explored due to the lack of large-scale panoramic RGB-D training data. We present Realsee3D, a hybrid dataset of 10K indoor scenes (1K real, 9K synthetic) with 299K panoramic viewpoints and precise metric annotations, and Argus, a feed-forward network trained on it for metric panoramic 3D reconstruction. In the sparse unordered capture setting of Realsee3D, a poorly chosen coordinate anchor can cause global pose drift. Argus addresses this with a learned covisibility module that selects the geometrically optimal reference view to anchor the metric world frame. To further improve multi-task learning, we decompose the bidirectional pixel-to-world mapping into interpretable sub-steps with per-step supervision and cross-coordinate joint constraints, reinforcing geometric consistency across prediction branches. On the Realsee3D benchmark, Argus achieves state-of-the-art metric performance in camera pose estimation, depth estimation, and point cloud reconstruction. Project page: https://argus-paper.realsee.ai.

Training embodied agents in the real world requires skilled operators and expensive hardware. Simulation environments offer a compelling alternative by enabling large-scale, cost-effective data augmentation. Consequently, rapidly constructing high-fidelity simulation scenes with a minimal sim-to-real gap has become a critical objective in robot learning. While reconstruction-based methods provide superior visual quality, current workflows are hindered by inefficient data acquisition and subpar foreground object extraction. We thus propose GASE, a highly automated system for simulation scene construction. GASE leverages multi-view video streams from panoramic camera arrays to enable rapid environment scanning. To ensure high-quality asset generation, our pipeline introduces a camera-pose-based strategy that robustly extracts objects across frames in the 2D domain, followed by high-fidelity scene inpainting. Foreground objects and the static background are then reconstructed independently and seamlessly imported into physics simulators for policy training. Extensive experiments demonstrate that GASE outperforms existing 3D Gaussian-based methods in segmentation accuracy by over 10% while achieving state-of-the-art inpainting quality. Furthermore, real-robot deployments across manipulation and navigation tasks maintains a performance gap of less than 10% compared to policies trained purely on real-world data. These results confirm that GASE provides an efficient and highly effective solution for bridging the sim-to-real gap. Code will be released.

3D object reconstruction, and camera pose estimation in industrial applications are challenging tasks, as errors are costly while the computation time is often limited. The complexity of typical industrial objects further complicates these tasks. Most of the existing datasets in this context do not depict realistic industrial scenarios. Therefore, we introduce the Machine Vision Metrology Industrial Object Dataset (MVM-IOD). Images of typical industrial objects are captured systematically, by moving a camera, mounted at the end effector of an industrial robot arm, on a hemisphere around the objects. MVM-IOD contains reference camera poses and reference 3D point clouds, the acquired RGB images of 9 objects and 2 background choices resulting in 18 scenes, which allows evaluation of all image based methods that compute a 3D reconstruction, camera poses, or novel views of a scene. Based on MVM-IOD, we extensively evaluate current SOTA 3D reconstruction and camera pose estimation methods, such as Structure from Motion, Multi-View Stereo, recent feed forward methods (Visual Geometry Grounded Transformer, π3), and 2D Gaussian Splatting and report our findings as a baseline for future research. The experiments show that capture setups like ours generate out-of distribution images for feed forward methods, leading to suboptimal point clouds and camera poses. However, these out-of-distribution images can be shifted closer to the training distribution by applying simple preprocessing steps. Consequently, in certain industrial applications, feed forward methods should be used with caution.

Precise camera pose control is critical for video diffusion, yet maintaining geometric consistency remains a challenge. Existing methods that directly inject numerical camera parameters into the diffusion backbone often fail to bridge the gap between abstract coordinates and visual content, leading to structural distortions. To address this issue, we propose CameraNoise, a flow-to-noise warping method that encodes camera motion into a temporally coherent stochastic representation. Unlike conventional conditioning, CameraNoise embeds camera poses directly into the noise space. This decouples motion from scene appearance while faithfully preserving trajectory dynamics. Specifically, we introduce a novel Geometry-guided Reprojection Flow and a noise warping algorithm, which jointly preserve the Gaussian prior of diffusion and ensure consistent noise propagation under camera transformations. By integrating CameraNoise into the diffusion process, our framework delivers stable, high-fidelity videos. Extensive experiments demonstrate that our approach significantly outperforms prior methods in both visual quality and trajectory faithfulness. The project page and code are available at: https://gulucaptain.github.io/CameraNoise/.

Camera pose matters. The position and orientation of each viewpoint define a shared spatial coordinate frame that relates observations across video frames. Yet this signal is largely absent from multimodal LLMs (MLLMs) for video understanding, which process frames as isolated 2D snapshots, instead of the persistent scene humans perceive. We revisit pose as a lightweight supervisory signal and introduce Cambrian-P, a video MLLM augmented with per-frame learnable camera tokens and a pose regression head. With a carefully designed sampling scheme, the model achieves substantial gains of 4.5-6.5% on spatial reasoning benchmarks such as VSI-Bench, generalizes across eight additional spatial and general video QA benchmarks, and, as a byproduct, achieves state of the art streaming pose estimation on ScanNet. Surprisingly, training on pseudo-annotated poses from in-the-wild video further improves general video QA benchmarks, showing pose helps beyond spatial reasoning. Together, these results position camera pose as a fundamental signal for video models that reason about the physical world.

Recent feed-forward 3D gaussian splatting methods have made dramatic progress on individual aspects of 3D scene reconstruction, but no existing method jointly addresses dynamic content, multi-view input, and unknown camera poses in a single feed-forward pass. Methods that handle dynamics either require accurate camera poses or accept only monocular input; pose-free multi-view methods address only static scenes; and per-scene optimization methods bridge some of these gaps but at minutes-to-hours cost per scene. We introduce NoPo4D, the first feed-forward system that addresses this empty quadrant. Building on a pretrained geometry backbone and recent 4D Gaussian frameworks, NoPo4D introduces a velocity decomposition that splits Gaussian motion into per-pixel image-plane shifts and depth changes, allowing direct supervision from pseudo ground-truth optical flow on the 2D component. This sidesteps both the differentiable rendering that couples prior posed methods to pose accuracy and the 3D motion ground truth that prior pose-free methods require. The system is rounded out by a bidirectional motion encoder for cross-view and cross-frame feature aggregation, and view-dependent opacity that mitigates cross-view and cross-timestep Gaussian misalignments. On four multi-view dynamic benchmarks, NoPo4D consistently outperforms prior feed-forward baselines, and with an optional post-optimization stage surpasses per-scene optimization methods, while running orders of magnitude faster.

The SCARED dataset is a widely used benchmark for endoscopic depth estimation, offering ground-truth 3D reconstructions captured with a structured light sensor. However, the depth maps for non-keyframe images rely on robot kinematics that introduce substantial pose errors, limiting the reliably labeled portion of the dataset to 35 keyframes. We present SCARED-C, a corrected version of the SCARED dataset that expands the number of reliable RGB-D pairs from 35 to 17,135. Our pipeline applies COLMAP, a Structure-from-Motion system, to re-estimate camera poses for all frames, followed by a scale recovery step that aligns the resulting reconstructions to metric space using the ground-truth keyframe depth maps. We validate the corrected poses through (1) stereo disparity evaluation and (2) monocular depth estimation experiments. The corrected dataset and code are publicly released to the community.

Pairwise translation directions are a key input to camera location estimation in global structure-from-motion. Existing estimators usually process each image pair independently, producing directions that may be locally plausible but inconsistent with the other relative directions in the viewing graph. To jointly estimate the direction, we propose TriDE, which exploits camera-triangle consistency as an efficient higher-order verification signal. Instead of solving a costly global nonlinear optimization problem that is sensitive to initialization, TriDE refines unreliable pairwise directions through message passing between directions and their incident weighted triangles. This information propagation strategy enables us to establish a strong phase-transition bound for exact recovery under a realistic random corruption model. Experiments on real image graphs show that TriDE improves direction accuracy by a large margin and yields better downstream camera locations, providing a practical link between local pairwise estimation and global camera pose geometry.

Recent advances have shown that large-scale video diffusion models can be repurposed as neural renderers by first decomposing videos into intrinsic scene representations and then performing forward rendering under novel illumination. While promising, this paradigm fundamentally relies on accurate intrinsic decomposition, which remains highly unreliable for real-world videos and often leads to distorted appearances, broken materials, and accumulated temporal artifacts during relighting. In this work, we present Relit-LiVE, a novel video relighting framework that produces physically consistent, temporally stable results without requiring prior knowledge of camera pose. Our key insight is to explicitly introduce raw reference images into the rendering process, enabling the model to recover critical scene cues that are inevitably lost or corrupted in intrinsic representations. Furthermore, we propose a novel environment video prediction formulation that simultaneously generates relit videos and per-frame environment maps aligned with each camera viewpoint in a single diffusion process. This joint prediction enforces strong geometric-illumination alignment and naturally supports dynamic lighting and camera motion, significantly improving physical consistency in video relighting while easing the requirement of known per-frame camera pose. Extensive experiments demonstrate that Relit-LiVE consistently outperforms state-of-the-art video relighting and neural rendering methods across synthetic and real-world benchmarks. Beyond relighting, our framework naturally supports a wide range of downstream applications, including scene-level rendering, material editing, object insertion, and streaming video relighting. The Project is available at https://github.com/zhuxing0/Relit-LiVE.

Egocentric pose estimation for Augmented Reality (AR) and assistive devices requires not just accurate predictions but guaranteed uncertainty regions. Conformal prediction (CP) provides such guarantees without retraining, but we show that standard CP with a single fixed threshold achieves nominal 90% overall coverage while covering only ~60% of the hardest 25% of frames (Q4) -- a ~30 percentage-point conditional coverage gap consistent across 12 participants, 3 predictors, and 3 horizons (108 evaluations) on EPIC-Fields. We further show that a geodesic SE(3) nonconformity score identifies physically harder frames than Euclidean scoring, with only 15-26% Q4 overlap and 2-3x higher ground-truth camera displacement for geodesic Q4 frames. To close the coverage gap, we propose DINOv2-Bridge adaptive CP: a two-stage difficulty estimator trained on a single source participant that transfers cross-participant without any images at test time, improving Q4 coverage from ~0.75 to ~0.93 while maintaining overall coverage at the 90% target.

Multi-camera systems offer rich observation capabilities for visual navigation and 3D scene reconstruction; however, the resulting feature redundancy often compromises computational efficiency. This challenge is particularly pronounced during bundle adjustment, where the non-linear optimization of both system poses and scene points incurs substantial computational overhead. To address this challenge, this paper introduces a pose-only geometric constraint for multi-camera systems and proposes a corresponding pose adjustment algorithm. Specifically, we use generalized camera model to establish a unified representation of the multi-camera system. Building upon this model, we formulate the multi-camera pose-only constraint, which implicitly represents a 3D scene point using two base observations and their associated poses, thereby achieving a pose-only representation of the projection geometry. Subsequently, we introduce a multi-camera pose adjustment algorithm that eliminates 3D points from the parameter space, thereby achieving efficient and focused pose optimization. Experimental results on both synthetic and real-world datasets demonstrate that the proposed algorithm outperforms baseline bundle adjustment methods in computational efficiency, while maintaining or even improving pose estimation accuracy.

Monocular visual odometry (VO) is a fundamental computer vision problem with applications in autonomous navigation, augmented reality and more. While deep learning-based methods have recently shown superior accuracy compared to traditional geometric pipelines, particularly in environments where handcrafted features struggle due to poor structure or lighting conditions, most rely on deterministic regression, which lacks the uncertainty awareness required for robust applications. We propose PoseFM, the first framework to reformulate monocular frame-to-frame VO as a generative task using Flow Matching (FM). By leveraging FM, we model camera motion as a distribution rather than a point estimate, learning to transform noise into realistic pose predictions via continuous-time ODEs. This approach provides a principled mechanism for uncertainty estimation and enables robust motion inference under challenging visual conditions. In our evaluations, PoseFM achieves strong performance on TartanAir, KITTI and TUM-RGBD benchmarks, achieving the lowest absolute trajectory error (ATE) on some of the trajectories and overall being competitive with the best frame-to-frame monocular VO methods. Code and model checkpoints will be made available at https://github.com/helsinki-sda-group/posefm.

Recent generative models can produce high-fidelity videos, yet they often exhibit 3D spatial geometric inconsistencies. Existing evaluation methods fail to accurately characterize these inconsistencies: fidelity-centric metrics like FVD are insensitive to geometric distortions, while consistency-focused benchmarks often penalize valid foreground dynamics. To address this gap, we introduce SGC, a metric for evaluating 3D \textbf{S}patial \textbf{G}eometric \textbf{C}onsistency in dynamically generated videos. We quantify geometric consistency by measuring the divergence among multiple camera poses estimated from distinct local regions. Our approach first separates static from dynamic regions, then partitions the static background into spatially coherent sub-regions. We predict depth for each pixel, estimate a local camera pose for each subregion, and compute the divergence among these poses to quantify geometric consistency. Experiments on real and generative videos demonstrate that SGC robustly quantifies geometric inconsistencies, effectively identifying critical failures missed by existing metrics.

Understanding camera motion is a fundamental problem in embodied perception and 3D scene understanding. While visual methods have advanced rapidly, they often struggle under visually degraded conditions such as motion blur or occlusions. In this work, we show that passive scene sounds provide cues complementary to vision for relative camera pose estimation for in-the-wild videos. We introduce a simple but effective audio-visual framework that integrates direction-of-arrival (DOA) spectra and binauralized embeddings into a state-of-the-art vision-only pose estimation model. Our results on two large datasets show consistent gains over strong visual baselines, plus robustness when the visual information is corrupted. To our knowledge, this represents the first work to successfully leverage audio for relative camera pose estimation in real-world videos, and it establishes incidental, everyday audio as an unexpected but promising signal for a classic spatial challenge. Project: http://vision.cs.utexas.edu/projects/av_camera_pose.

We address the challenging problem of dense dynamic scene reconstruction and camera pose estimation from multiple freely moving cameras -- a setting that arises naturally when multiple observers capture a shared event. Prior approaches either handle only single-camera input or require rigidly mounted, pre-calibrated camera rigs, limiting their practical applicability. We propose a two-stage optimization framework that decouples the task into robust camera tracking and dense depth refinement. In the first stage, we extend single-camera visual SLAM to the multi-camera setting by constructing a spatiotemporal connection graph that exploits both intra-camera temporal continuity and inter-camera spatial overlap, enabling consistent scale and robust tracking. To ensure robustness under limited overlap, we introduce a wide-baseline initialization strategy using feed-forward reconstruction models. In the second stage, we refine depth and camera poses by optimizing dense inter- and intra-camera consistency using wide-baseline optical flow. Additionally, we introduce MultiCamRobolab, a new real-world dataset with ground-truth poses from a motion capture system. Finally, we demonstrate that our method significantly outperforms state-of-the-art feed-forward models on both synthetic and real-world benchmarks, while requiring less memory.