Robust Perception

Scalable machine learning in challenging underwater environments is strongly limited by the lack of labeled real-world training data. This data is often expensive and laborious to gather, making large-scale real-world data challenging to gather and curate. However, simulated data can help close the gap, enabling many learning-based tasks for underwater perception. In this work, we extend OceanSim, an IsaacSim-based underwater perception simulator, with a Synthetic Data Generation (SDG) pipeline for training models to be used in underwater scenarios. The proposed pipeline enables users to generate large, automatically labeled, photorealistic datasets with configurable scene appearance, structure, and sensor settings. We evaluate the pipeline on a real-world sea urchin detection task and study how different forms of synthetic scene variation affect sim-to-real performance. Based on these experiments, we discuss findings on our results, main limitations of the current pipeline and identify future directions for improving underwater rendering fidelity, scene diversity, and the evaluation of sim-to-real generalization. The open-source code can be found at https://github.com/umfieldrobotics/OceanSim.

Virtual sensing, the estimation of hard-to-measure quantities from available sensor measurements, is a critical enabler for control and monitoring in cyber-physical systems. However, when sensors fail, learning-based predictors can produce physically implausible estimates that propagate to system-level failures. We argue that real-world deployment demands robustness and introduce MuViS-C, the first multi-domain benchmark of robustness against common sensor failures in learning-based virtual sensing. Building on an existing nominal-performance benchmark and established corruption taxonomies, it covers ten sensor failure modes, from subtle drifts to catastrophic signal dropouts, at multiple severities. These are paired with complementary robustness measures capturing average error under corruption, relative degradation, and worst-case fragility. Across nine datasets from six domains, we benchmark six architectures spanning gradient-boosted trees and the major inductive biases for sequence modeling: convolution, recurrence, attention, and MLP-mixing. On the attention-based architecture, we further probe three robustification strategies. We find that (i) every model degrades substantially under corruption, becoming worse than a naïve predictor on at least one corruption setting, (ii) gradient-boosted tree ensembles achieve strong robustness, and (iii) dedicated robustification closes the gap between the attention-based architecture and the most robust models, though each strategy hurts nominal performance. The benchmark's multi-domain design proves essential, as model rankings shift across datasets, and no single domain captures the full robustness picture. MuViS-C is open-source and extensible to new datasets, failure modes, measures, and models.

Multi-Task semantic communication (SemCom) prioritizes simultaneous execution of multiple tasks over bit-accurate reconstruction in future intelligent networks. In our prior work [1], we introduced the cooperative multi-task SemCom (CMT-SemCom) framework, in which the semantic encoder is divided into a common unit (CU) and multiple specific units (SUs) to facilitate cooperative multi-task processing. However, CMT-SemCom has been evaluated on homogeneous classification tasks on simplistic datasets, limiting its applicability to real-world perception systems. In this paper, we extend our CMT-SemCom to jointly handle heterogeneous classification and regression tasks on the complex Cityscapes dataset. We adopt the information maximization (InfoMax) principle so that it accommodates mixed discrete and continuous semantic variables. In particular, we benchmark the proposed framework against independent single-task training, a conventional task-agnostic digital transmission, and single-encoder multi-decoder SemCom. Additionally, we investigate the impact of CU capacity on joint task performance, providing design insights. Extensive evaluations demonstrate that CMT-SemCom significantly outperforms the benchmarks.

Deformable linear objects such as wires and cables are difficult to segment because they are thin, highly deformable, and frequently self-occluded, while large-scale instance-level annotations are expensive to obtain in real scenes. Existing resources either focus on cable tracing or semantic segmentation under constrained settings, or generate visually plausible images without physically grounded wire deformation. We present WireSeg-32k, a synthetic dataset for wire instance segmentation with 32,000 RGB images, instance masks, depth maps, and a complementary real-world test set with annotations. To generate this dataset, we develop DeformX, a co-simulation pipeline that couples Cosserat-rod dynamics with photorealistic Isaac Sim rendering, enabling physically plausible, contact-consistent wire shapes, CAD-based wire assets, and diverse visually grounded scenes. As a simple baseline, LoRA fine-tuning SAM3 on WireSeg-32k alone improves real-world mAP@75 by 10.2% over the off-the-shelf model, showing that physically grounded synthetic data can transfer to real wire perception.

A fundamental challenge in artificial intelligence is the transformation of observations into explicit symbolic representations suitable for abstraction, interpretation, and reasoning. While modern AI systems achieve remarkable perceptual capabilities through large-scale statistical learning, the resulting knowledge is typically encoded within latent parameters that are difficult to inspect or manipulate analytically. Inspired by Neuro-Symbolic AI and theories of human abstraction, this paper investigates the formation of symbolic mathematical representations from geometric observations. We propose NeuSOGA (Neuro-Symbolic Geometric Abstraction), a framework that progressively transforms observations into topological abstractions, geometric abstractions, and ultimately symbolic mathematical representations. The architecture combines topology-guided structural discovery using Euclidean Distance Transforms, foundation-model perception using Segment Anything, adaptive multi-scale geometric abstraction, and symbolic synthesis through Implicit Area Splines. The resulting representation is an analytical implicit model supporting arbitrary-order smoothness, additive composition, and closed-form evaluation. Unlike neural latent encodings, the generated representation remains interpretable, editable, and mathematically explicit. Experiments on ModelNet40 point clouds, arbitrary-view projections, and segmented optical observations demonstrate that NeuSOGA transforms diverse observations into compact symbolic representations while preserving essential geometric and topological structure across sensing modalities and viewing directions. NeuSOGA provides an interpretable and explainable pathway from observation to symbol and establishes

Deep neural networks are increasingly deployed in safety-critical domains as perception modules, where failures are often caused due to rare and under-represented scenarios. This necessitates the need to evaluate the semantic robustness of perception models; conformance of behavior to high-level requirements over real-world perceptual variability. To address this, we propose SeFaR, a framework for systematic semantic-feature-centric testing of vision models. Given a natural-language requirement and a set of satisfying inputs, SeFaR evaluates robustness with respect to diverse realistic semantic variations that preserve requirement satisfaction. The approach employs a novel hierarchical concept model enabling structured exploration of the feature space and incorporation of domain knowledge via user-defined concepts. State-of-the-art diffusion and vision-language models are leveraged to generate photorealistic semantics-preserving perturbations and identification of previously unknown features impacting behavior. A feedback-driven adaptive process is adopted to generate interpretable failure-inducing semantic concepts along with corresponding test inputs. Evaluation on case studies demonstrates that the proposed framework effectively satisfies requirement preconditions while identifying requirement-independent features that influence model decisions, enabling it to both uncover faults and relate them to such features.

Millimeter-wave human activity recognition suffers significant performance degradation when the user's orientation changes relative to the sensing system, yet collecting labeled multi-orientation data is labor-intensive and costly. To eliminate the need for exhaustive multi-orientation measured data, we develop a physics-guided simulator that synthesizes orientation-diverse wireless training data from single-orientation motion. Specifically, to suppress orientation-induced feature variations, we propose a dual-attention network that extracts activity-discriminative and orientation-robust representations from dual-link Doppler spectrograms. To bridge the simulation-to-reality gap, we introduce an adversarial unsupervised transfer learning mechanism that aligns feature distributions using only a small number of unlabeled target-domain samples. The S2M-Sense platform shows high fidelity in reproducing real-world signatures, validated against 60.48 GHz mmWave measured data with an average structural similarity index measure (SSIM) of 0.84 between simulated and measured Doppler spectrograms across all 4 activities and 4 orientations. Experimental results show that S2M-Sense achieves 88.33% recognition accuracy using only the dual-link multi-orientation simulated dataset, which improves to 95% after simulation-to-reality transfer learning with as few as 16 unlabeled measured samples. Both cases with and without transfer learning outperform state-of-the-art cross-domain sensing methods.

Deploying pre-trained perception models in novel environments degrades their accuracy under distributional shift, and assembling them alone does not recover it: combiners such as majority voting trade recall for precision and are brittle to coordinated failures. Prior metacognitive methods learn logical rules that flag a model's errors, but rely on hand-authored domain-knowledge cues (object-size priors, segmentation masks) that do not transfer to genuinely novel scenes. We show that this metacognitive layer can be learned without any domain knowledge by exploiting vector-space geometry: per-model Label Vector Pools (LVP), built from each model's own training embeddings, yield error-detection rules from the geometry of detections relative to training-determined prototypes, reaching parity with domain-knowledge rules to within $0.002$ every F1 on test set. Because the approach remains neurosymbolic, these geometric rules share a single logical framework and can still be complemented by domain knowledge when available. We frame the fusion of multiple imperfect ViT-based detectors as a consistency-based abduction problem solved at test time by an exact Integer Program (IP) and a polynomial-time heuristic. On an aerial-imagery benchmark of 15 weather-shifted test sets and six ViT detectors, our domain-knowledge-free layer matches the strongest majority-vote variant on clean data (within $0.005$ F1) and, unlike every majority-vote baseline, retains its performance under a coordinated label-flipping attack: at a $90\%$ flip rate it averages $0.42$ F1 versus $0.35$ for MV-Plurality (a $22\%$ relative gain) and attains the highest F1 on \emph{every} test set once the flip rate exceeds $0.4$

Near-duplicate image matching is crucial for trust and safety, provenance verification, copyright enforcement, and large-scale visual search. Modern platforms increasingly rely on deep perceptual hashes, which map visually similar images to nearby representations despite common image transformations. However, adversarial perturbations can cause near-duplicates to evade matching. We present DualShield, a plug-in defense that improves the robustness of existing deep perceptual hashes without retraining or modifying their underlying models. DualShield combines matching-time randomized smoothing, which aggregates decisions over perturbed reference-query pairs, with publication-time hardening, which adds an optimized imperceptible perturbation to each reference image before publication. Together, these mechanisms provide certified and empirical robustness. DualShield achieves a certified $\ell_2$ radius of approximately 0.3, guaranteeing that query perturbations within this radius cannot evade matching. We further evaluate it against adaptive white-box, black-box, and image-transformation attacks. Across eight deep perceptual hashes and three datasets, DualShield substantially reduces attack success rates while preserving low collision rates. These results show that deep perceptual hashes can be strengthened without costly retraining by improving the matching procedure and hardening reference images before publication.

Video deraining aims to recover clean visual content from rainy videos for reliable perception under adverse weather. Existing methods mainly rely on RGB sequences and temporal redundancy, but RGB-only restoration remains ambiguous in dynamic rainy scenes, where rain streaks, textures, boundaries, motion, and occlusions may share similar visual patterns. Event cameras provide complementary motion-sensitive cues with high temporal resolution, but event streams also contain sensor noise and background-triggered responses, so direct RGB-Event fusion may introduce cross-modal interference. To address this issue, we propose RainDancer, a progressive RGB-Event video deraining framework based on a decompose-before-interact paradigm. The core idea is to separate rain and background components within each modality before cross-modal interaction. In the RGB branch, frame features are progressively decomposed into rain and background representations. In the event branch, a rain-oriented spiking neural network module captures sparse and bursty event dynamics associated with rain motion. Component-level fusion is then performed between semantically aligned representations for structure preservation and rain suppression. We further introduce event-domain supervision to regularize sparse event reconstruction, structural consistency, and gradient orientation. Experiments on synthetic and real RGB-Event video deraining datasets demonstrate superior quantitative performance, visual quality, and downstream perception robustness. Code is available at https://github.com/AE86-plus/RainDancer.

Fusing standard RGB frames with asynchronous event streams has emerged as a definitive paradigm for robust perception in degraded environments. Although unified backbones have recently gained traction in multi-modal vision, adapting them to the RGB-Event domain remains fundamentally challenging. Existing architectures either resort to decoupled dual encoders that double computational overhead, or adopt generic unified designs that fail to resolve implicit geometric parallax and cross-spectral aliasing under the extreme representational divide between dense intensity grids and sparse kinematic spikes. To transcend these bottlenecks, we present Evita, the first unified backbone specifically engineered for dedicated dense RGB-Event parsing. To achieve profound modal synergy, Evita explicitly embeds a suite of intrinsic co-learning modules directly into every encoder layer. Specifically, it features Geometric Parallax Rectification for adaptive spatial alignment, Harmonic Spectral Resonance for texture transfer exclusively in the complex frequency domain, and Transient Global Routing for event-driven asymmetric attention. To guarantee robust feature extraction against spatial misalignments and decouple representations from specific event encodings, we construct N-ImageNetV2 alongside a stochastic event representation mixing pretraining protocol, empowering the network to seamlessly accommodate arbitrary event formats in downstream tasks. Extensive evaluations across the DELIVER, DDD17, and DSEC benchmarks confirm that Evita establishes new state-of-the-art metrics while delivering a superior accuracy-latency trade-off for real-time multimodal perception.The code are publicly available at: https://github.com/chaineypung/Evita.

Wheelchair users call for assistive mobility systems that provide active support, adapt to dynamic environments, and are intuitive and user-friendly. However, powered wheelchairs typically still provide limited autonomy and lack effective integration with advanced perception and navigation capabilities, particularly in complex real-world environments. This paper presents a preliminary study toward autonomous powered wheelchairs for real-world assistive mobility. We introduce a proof-of-concept prototype that integrates autonomous perception, gesture-based interaction, and navigation on a commercially available self-balancing powered wheelchair. The proposed system builds upon Genny Zero, a commercial self-balancing wheelchair that enables hands-free and intuitive operation through body-weight shifting. To extend its capabilities toward autonomous operation, we integrate an RGB-D camera for human-aware perception and interaction, together with a LiDAR sensor for localization and navigation. We demonstrate the integrated system in two assistive applications: (i) hailing, allowing users to call the wheelchair from a distance; and (ii) people-following, where the wheelchair follows a person using leader-follower strategies, including a constrained indoor navigation example. The results highlight the potential of combining autonomous robotics with assistive mobility platforms, while also showing the feasibility of the proposed integration and identifying the main technical challenges that must be addressed before moving toward user-ready, accessible, and intelligent mobility solutions. A video demonstrating the experimental setup and results is available at: https://youtu.be/LVAix_Qx7bM.

Multi-perturbation adversarial training (MAT) aims to achieve robustness against multiple $\ell_p$ perturbations but suffers from robustness trade-offs between different threats. To address this, we employ a mixture of experts (MoE) to route different threats through distinct model pathways. However, naive application of MoE encounters two critical challenges: experts tend to overlook threat-specific features and redundantly capture features shared across threats, and gating networks suffer from threat-agnostic routing where they learn nearly identical routing patterns across threats, thus preventing the construction of threat-specific model pathways. To this end, we propose Robust Mixture of Low-Rank Experts (RoME), where each expert is a low-rank additive update to the shared backbone, allowing it to capture threat-common features while experts focus on threat-specific information. To address threat-agnostic routing, RoME introduces (i) dual-scale gating that exploits threat-discriminative signals from local and global level features, and (ii) threat-guided gating diversification that enforces diverse expert utilization across threats. Extensive experiments demonstrate that RoME outperforms existing state-of-the-art MAT in union robustness and natural accuracy and improves robustness against unseen threats. Codes are available at https://github.com/wkim97/RoME.

Video reasoning language models implicitly assume that every input frame is equally reliable. This leads to what we term the Blind Trust Problem: under realistic perturbations such as motion blur, glare, or occlusion, frontier video reasoning models can suffer 15-30%p accuracy drops on real-world embodied benchmarks, while remaining unaware that their visual evidence has been degraded. To address this challenge, we propose Robust-TO, an agentic video understanding framework that explicitly integrates per-frame trustworthiness into every stage of reasoning. Robust-TO organizes heterogeneous visual perception tools under a unified evidence interface. Each tool receives a sub-query derived from the original question and a set of trustworthy frames selected by the reliability-relevance score. It returns evidence in a shared format: a concrete prediction (e.g., a bounding box, motion trajectory, recognized text, or action label), temporal grounding, and a calibrated reliability score. During reasoning, these calibrated scores guide evidence weighting in a three-tier synthesis process (high/medium/low) and define a confidence-cost GRPO reward that jointly optimizes correctness, evidence reliability, and efficiency. On two video reasoning benchmarks spanning eight tasks, Robust-TO achieves 56.4% average accuracy on clean inputs, surpassing the strongest open-source baseline by 10.6%p and outperforming Gemini-2.5-Pro (46.2%). Under five realistic corruption types, Robust-TO maintains 54.3% average accuracy, 5.8%p above the strongest open-source baseline, while exhibiting the smallest clean-to-corrupted accuracy drop among all compared methods.

RGB-Event tracking improves localization robustness by fusing RGB appearance textures and dense temporal motion cues from event sensors. While this multi-modal scheme broadens tracking applicability, real-world scenes suffer diverse structured signal degradations that hinder traditional multi-modal fusion. In harsh environments, either modality can lose reliability drastically, and targets frequently appear incomplete due to occlusion, edge truncation and foreground clutter.To tackle the above challenges, we present a hierarchical perturbation and retrieval framework tailored for RGB-Event tracking with robustness against partial target missing and modal degradation, termed APRTrack. To mimic real-world signal corruption, APRTrack constructs structured degradation via two adversarial perturbation branches at the modality and spatial levels, which separately simulate full-modal failure and localized target region absence. A hierarchical routing mechanism is designed to disentangle the training pipelines of the two perturbation types, effectively eliminating feature collapse induced by superimposed degradation constraints. Furthermore, we devise Footprint-guided Channel-calibrated Hopfield Retrieval (FCHR) for reliable historical information compensation. This module evaluates retrieval confidence based on association footprints between queries and memory banks, and calibrates the retrieval metric space prior to Hopfield matching, realizing controllable historical feature compensation bounded to target regions. Extensive experiments on FE108, COESOT, VisEvent, and FELT datasets demonstrate the effectiveness of our proposed strategies for the RGB-Event visual object tracking. The source code and pre-trained models will be released on https://github.com/Event-AHU/OpenEvTracking

Robust perception underpins autonomous driving, and most recent progress comes from scaling the model-larger backbones, foundation models, and cooperative multi-agent fusion. We pursue a complementary, upstream question: what should the camera itself measure? Using a differentiable RAW-to-task pipeline, we decompose which sensor degrees of freedom benefit dense prediction. Learning the spectral colour-filter-array (CFA) weights is the dominant lever, improving mIoU by +0.017 (KITTI-360) and +0.023 (ACDC) over a fixed camera. In contrast, point-spread-function (optics) co-design is net-negative (-0.020 mIoU on KITTI-360) - a consequence of the data-processing inequality, which also bounds the task information that any downstream model, however large or cooperative, can recover. Noise co-optimisation is marginal, and counter to intuition enlarging the CFA tile beyond 2x2 consistently hurts, as the filters are confined to the rank three sRGB input. Because the intervention is at the sensor, the gains are model-agnostic; we validate robustness on ACDC's fog, night, rain, and snow, and conclude with a simple recipe: learn the 2x2 CFA weights and keep an identity PSF.

Occlusion-robust scene recovery remains a major challenge in computational imaging, particularly in natural environments where dense foreground vegetation severely limits visibility. We propose a vision-reasoning-guided light field occlusion removal framework that combines the visibility recovery capability of light field integration (LFI) with the semantic reasoning capacity of vision-language models (VLMs). Multi-view observations are first integrated via LFI to suppress foreground occlusions and produce an initial visibility-enhanced representation. A VLM is then incorporated as a conditional semantic prior to restore degraded structures and recover fine details, guided by the observed measurements. To improve recovery consistency and reduce hallucination artifacts, we introduce a multi-sample fusion strategy that aggregates multiple generated hypotheses into a unified estimate. Experimental results on synthetic and real-world datasets demonstrate state-of-the-art performance, achieving the highest average SSIM across four synthetic light field benchmark scenes (4-Syn) and strong generalization across structured and unstructured acquisition settings. These results highlight the effectiveness of combining physical imaging constraints with vision-language reasoning for robust perception under severe occlusion, with applicability to search-and-rescue and exploratory robotic navigation.

Thermal infrared (TIR) imaging has been a popular choice for field robotics due to its robust perception capability under low light visual degradation, but it suffers from severe stochastic and fixed-pattern noise that breaks downstream estimation. This noise is intensified indoors due to low thermal contrast and uniform temperature distributions, contributing to the relative lack of indoor TIR deployments. Existing TIR denoising methods exhibit a poor accuracy-efficiency tradeoff, either too slow for online deployment required in robotics or insufficiently robust to severe degradation, while typically being trained on synthetic noise. Addressing these problems, we propose TIDY, a lightweight wavelet-domain denoiser trained on real clean-noisy TIR data. By reformulating TIR denoising in the wavelet domain, TIDY explicitly disentangles noise from structural content, enabling targeted suppression with reduced spatial complexity, significantly improving inference speed over prior methods (~34Hz). TIDY introduces two new metrics, Wavelet Entropy and Wavelet Directional Stripe Index, as complementary loss terms to explicitly suppress stochastic noise and stripe artifacts. Across severe indoor corruption and zero-shot settings, TIDY improves robustness and yields consistent gains in downstream robotics tasks including thermal inertial odometry and monocular depth estimation. Code and dataset is available at: https://github.com/williamrheeth/TIDY

Cloud-hosted large multimodal models (LMMs) can provide strong open-vocabulary perception for Vehicle-to-Everything systems, but naively transmitting full-resolution frames from edge to cloud causes severe communication overhead and high cloud-side prefill latency. We present CABLE, a cloud-assisted bandwidth-efficient LMM-based encoding framework for edge-cloud perception. CABLE propagates the previous cloud segmentation mask on the edge using ego-motion compensation, refines it with residual-motion cues, and consolidates disconnected regions via a corridor envelope to form a robust region of interest (ROI). Only ROI-masked images are uploaded, while the cloud segmentation output is fed back as the prior for the next frame, forming a mask-to-ROI-to-LMM feedback loop. Experiments on five datasets (nuScenes, WOD-ZB, Waymo, KITTI, and CADC) show consistent communication savings while largely preserving perception, achieving $73$--$87\%$ ROI pixel-coverage reduction with $5$--$8\times$ estimated LMM prefill speedup at a modest detection-quality trade-off relative to full-frame inference.

While Website Fingerprinting (WF) attacks achieve high accuracy in controlled laboratory settings, they often degrade substantially in real-world environments due to spatio-temporal drift, browser heterogeneity, proxy obfuscation and etc. This limitation stems from their sole reliance on low-level traffic features that are noisy and highly sensitive to environmental perturbations. To address this problem, we propose \textbf{ResAware}, a cross-environment resource-aware distillation framework under a \textit{training-rich/inference-poor} asymmetric setting. Specifically, ResAware trains a teacher model on resource-level features, and then distills the resulting privileged knowledge into a student model through heterogeneous knowledge distillation. At deployment time, the student model performs inference using only encrypted traffic, incurring zero additional cost. We evaluate ResAware on a large-scale dataset collected over five months from six globally distributed vantage points, comprising more than $160{,}000$ paired samples. The results show that ResAware significantly enhances the cross-environment robustness of diverse WF baselines. Under a 150-day temporal drift, for example, ResAware improves the F1-score of Var-CNN from $72.77\%$ to $81.49\%$ and the open-world $TPR@1\%FPR$ from $22.40\%$ to $27.20\%$. Our results demonstrate that resource-level supervision improves WF robustness without expanding online observation capabilities.

Visual place recognition in natural forest environments remains challenging due to repetitive vegetation, weak structural cues, and significant appearance variation across traversals. To address this limitation, this paper proposes a lightweight depth-aware distillation framework that injects geometric cues into a DINOv2-based place recognition model, while maintaining its pre-trained descriptor space. Evaluated on the recent WildCross benchmark, the proposed approach yields gains over an appearance-only counterpart, providing robustness to appearance variations. These results demonstrate the importance of depth as a strong complementary modality for place recognition in natural environments and identify depth-aware distillation as a promising direction for more robust forest perception.

Deep learning models are increasingly central to autonomous vehicle (AV) pipelines, yet their integration has traditionally followed a monolithic design where perception, planning, and control execute on a single onboard computer. This design overlooks the emerging paradigm of cooperative autonomy, where vehicles interact with roadside units (RSUs), edge servers, and cloud-hosted intelligence through vehicle-to-everything (V2X) connectivity. Cooperative perception and control improve safety and efficiency, but also introduce systems-level challenges: network latency, compute heterogeneity, and multi-tenant contention, all critically affect real-time decision-making. These challenges are further amplified by the increasing reliance on large foundation models, whose scale necessitates cloud deployment. We present CADET (Cooperative Autonomy through Distributed Experimentation Toolkit), a modular platform for systematic and reproducible evaluation of distributed cooperative autonomy systems under realistic deployment conditions. CADET decouples the AV stack into composable modules that can be flexibly deployed across vehicles, infrastructure, and edge/cloud tiers. The framework integrates state-of-the-art models, incorporates trace-driven network and workload emulation, and provides synchronized model-, system-, and task-level instrumentation. Through V2V and V2I experiments, we show that distributed deployment choices fundamentally shape safety, with V2V intent packets outperforming cloud-based perception and RSU-assisted perception sustaining safety until overloaded by concurrent requests. Although designed for AV pipelines, CADET also supports dataset-driven experimentation, enabling systems and ML researchers to benchmark distributed inference workloads independently of full vehicle simulation. CADET is open source, with code and demo available at https://nesl.github.io/cadet-web.

The development on robust perception systems for Maritime Autonomous Surface Ships (MASS) is heavily constrained by the scarcity of diverse training data, particularly for adverse weather and low-light conditions. Because collecting paired images in dynamic maritime environments is physically impossible, synthetic data generation via unpaired image-to-image translation offers a critical solution. However, existing generative models suffer from failing to preserve the fine structural details of small navigational objects due to latent compression bottlenecks. In this paper, we introduce a framework for generating synthetic maritime data using CycleGAN-turbo, a one-step unpaired translation architecture. By incorporating zero-convolution skip connections to bypass the Variational Autoencoder (VAE) bottleneck, our approach explicitly preserves small object details (e.g., distant vessels and sea marks) during translation. We compiled a dataset of 7,000 maritime images to train and evaluate models for Day-to-Foggy, Day-to-Sunset, and Day-to-Night domain translations. Qualitative evaluations and variable-strength inference studies demonstrate that our method effectively synthesizes realistic atmospheric conditions while maintaining the underlying semantic structure of the scene. The Day-to-Foggy and Day-to-Sunset models exhibit great structural retention, whereas the Day-to-Night model highlights the challenge of semantic hallucination, such as generating artificial coastal lights, induced by unbalanced training distributions. Ultimately, this work establishes an efficient, structure-aware data synthesis pipeline that directly addresses the data scarcity bottleneck in autonomous maritime navigation.

Camouflaged object detection (COD) aims to localize targets that exhibit minimal perceptual differences from backgrounds through physical attributes. Existing methods, constrained by the static train-then-freeze paradigm, suffer from domain rigidity and annotation dependency, limiting their adaptability to scene variations and unseen camouflage patterns. To overcome these, we propose the hierarchical consistency learning (HCL) framework, which integrates test-time adaptation for dynamic representation recalibration. Specifically, we design the hierarchical representation reconstruction (HRR) to alleviate feature entanglement by synergizing spatial reconstruction with dual-stream frequency-domain decomposition, enhancing robustness against appearance homogenization. The pixel and spectrum inference provide structural and contextual priors. We further introduce task affinity guidance (TAG) to propagate knowledge across branches via channel-wise affinity, aligning local discriminative cues and mitigating semantic drift. To ensure semantic invariance, we formulate the prototype consistency calibration (PCC), which aggregates region features into compact prototypes and establishes prototype-feature similarity. This imposes implicit and hierarchical constraints that bridge task and representation gaps. Extensive experiments across four camouflaged and four underwater object benchmarks, under three degradation settings, demonstrate that our method consistently outperforms state-of-the-art approaches, highlighting its robustness and generalization under distribution shifts.

Gait recognition enables non-intrusive, privacy-preserving identification but suffers in uncontrolled environments due to illumination and motion sensitivity of conventional cameras. In this work, we explore gait recognition using event cameras, which offer microsecond temporal resolution and high dynamic range, naturally capturing robust dynamic cues and suppressing static noise. Existing event-based approaches typically aggregate event streams into event images over long time windows, thereby discarding fine-grained motion dynamics critical for gait recognition. Therefore, we propose \textbf{EventGait}, an end-to-end dual-stream framework that separately models motion and shape while preserving the advantages of events. Our dynamic stream leverages a Mixture of Spiking Experts (MoSE) with diverse neuron constants for robust dynamic perception across complex motion and illumination scenes, while the static stream learns dense shape representations via Cross-modal Structure Alignment (CroSA) with large vision foundation models. To address the absence of large-scale event-based gait datasets, we introduce a synthesis pipeline and release two new benchmarks: SUSTech1K-E and CCGR-Mini-E. Extensive experiments have shown that event-based gait recognition not only achieves results comparable to camera-based gait recognition under normal conditions but also significantly outperforms it in low-light scenarios. Our approach sets a new state of the art on both synthesized and real-world event-based gait benchmarks, highlighting the robustness and potential of event-driven gait analysis. The code and datasets are released at https://github.com/QUEAHREN/EventGait.

Aggregate object detection metrics inherently mask catastrophic and repeatable failures in operationally critical, long-tail minority classes. This paper formally defines this pervasive vulnerability as the Hard-Category Reliability Problem (HCRP): the fundamental architectural challenge of strictly rectifying vulnerable categories without compromising the performance boundaries of stable classes under stringent protocols. To systematically dismantle this limitation, we propose Error-Decomposed Class-Conditional Fusion (ED-CCF), an elegant decision-layer inference framework. Diverging from heuristic global post-processing, ED-CCF projects predictions into a sophisticated quad-state error taxonomy, dynamically activating calibration pathways exclusively upon rigorous empirical justification. On a highly constrained 600-image validation benchmark, isolating cz as the critical vulnerability (HCEC=0.86, BSR=0.14), our framework achieves a targeted breakthrough: it elevates cz mAP50 from 0.089343 to 0.109353 (a massive +22.4% relative surge) while flawlessly preserving the Pareto optimality of global stability (raising all mAP50 from 0.581925 to 0.584864). Backed by exhaustive validation across 50 paired subset trials demonstrating an overwhelming 96% win rate and strict Bonferroni-corrected Wilcoxon significance (p<0.05), this work fundamentally redefines output-level fusion as an auditable, statistically guaranteed paradigm for safety-critical visual perception.

Deep neural networks are vulnerable to adversarial perturbations, limiting deployment in safety-critical applications such as synthetic aperture radar (SAR) automatic target recognition (ATR). Randomized smoothing improves robustness by averaging predictions over noisy inputs, but isotropic noise often fails to preserve the semantic structure of SAR imagery. We propose semantic smoothing, a defense that replaces noised-based perturbations with structured randomized transformations generated by a novel view synthesis model. For SAR, we condition on acquisition geometry to synthesize multiple plausible radar views. Predictions across generated randomized views are aggregated to form a robust classifier. Experiments show that semantic smoothing improves robustness against standard attacks, such as FGSM and PGD, and SAR-specific attacks, such as OTSA and SMGAA, while also increasing clean classification accuracy. These results demonstrate that randomized smoothing via semantically preserving geometric transformations is a promising alternative to isotropic noise for adversarial defense in structured sensing domains.

Purely RGB-based vision models often fail to provide reliable cues in challenging scenarios such as nighttime and fog, leading to degraded performance and safety risks. Infrared imaging captures heat-emitting sources and provides critical complementary information, but existing high-fidelity fusion methods suffer from prohibitive latency, rendering them impractical for real-time edge deployment. To address this, we propose FusionProxy, a real-time image fusion module designed as a fully independent, plug-and-play component with diffusion level quality. FusionProxy exploits two complementary statistics of a teacher sample ensemble: per-pixel variance in raw image space, used to weight pixel-level supervision, and per-pixel variance inside frozen foundation backbones, used to route feature-level alignment spatially. Once trained, FusionProxy can be directly integrated into any visual perception system without joint optimization. Extensive experiments demonstrate that our method achieves superior performance on static recognition tasks and significantly enhances robustness in dynamic tasks, including closed-loop autonomous driving. Crucially, FusionProxy achieves real-time inference speeds on diverse platforms, from high-end GPUs to commodity hardware, providing a flexible and generalizable solution for all-day perception.

Vision-language models (VLMs) achieve strong multimodal performance but remain prone to relation hallucination, which requires accurate reasoning over inter-object interactions. We study the impact of visual perturbations, specifically rotation and noise, and show that even mild distortions significantly degrade relational reasoning across models and datasets. We further evaluate prompt-based augmentation and preprocessing strategies (orientation correction and denoising), finding that while they offer partial improvements, they do not fully resolve hallucinations. Our results reveal a gap between perceptual robustness and relational understanding, highlighting the need for more robust, geometry-aware VLMs.

We propose UAPAR, an Uncertainty-Aware Pedestrian Attribute Recognition framework. To the best of our knowledge, this is the first EDL-based uncertainty-aware framework for pedestrian attribute recognition (PAR). Unlike conventional deterministic methods, which fail to assess prediction reliability on low-quality samples, UAPAR effectively identifies unreliable predictions and thus enhances system robustness in complex real-world scenarios. To achieve this, UAPAR incorporates Evidential Deep Learning (EDL) into a CLIP-based architecture. Specifically, a Region-Aware Evidence Reasoning module employs cross-attention and spatial prior masks to capture fine-grained local features, which are further processed by an evidence head to estimate attribute-wise epistemic uncertainty. To further enhance training robustness, we develop an uncertainty-guided dual-stage curriculum learning strategy to alleviate the adverse effects of severe label noise during training. Extensive experiments on the PA100K, PETA, RAPv1, and RAPv2 datasets demonstrate that UAPAR achieves competitive or superior performance. Furthermore, qualitative results confirm that the proposed framework generates uncertainty estimates that are predictive of challenging or erroneous samples.

Real-world visual systems face time-varying perturbations, including weather, sensor noise, compression artifacts, and background distractions. Existing image restoration methods are typically designed for fixed corruption types and optimized for pixel-level fidelity, leaving open two questions: how restoration behaves under non-stationary corruption switching, and whether pixel-level fidelity preserves the task-relevant information needed by downstream models. To study this setting, we introduce the Visual Degraded Control Suite (VDCS), a benchmark that injects Markov-switching physical degradations into rendered scenes. We further identify a fundamental failure mode of reconstruction-based representations: faithfully reconstructing corrupted observations forces the latent state to encode corruption-specific nuisance information, thereby contaminating downstream models. From an information-bottleneck perspective, anchoring the representation to the clean foreground eliminates this contamination. Motivated by this analysis, we propose \emph{Agent-Centric Observations with Mixture-of-Experts} (ACO-MoE), a frozen, plug-and-play observation adapter that combines a routed bank of restoration experts with a foreground-mask branch. ACO-MoE is pretrained entirely offline on synthetic rendered data with automatically generated degradation pairs and simulation-derived foreground masks, requiring no manual annotation. At inference time, it takes only corrupted RGB as input without corruption labels, clean reference frames, or foreground masks. Across VDCS, DMC-GB, and RoboSuite, ACO-MoE consistently improves downstream control with both model-free and model-based backbones, recovering 95.3% of clean-input performance under challenging Markov-switching corruptions. It also generalizes zero-shot to unseen visual perturbations excluded from adapter pretraining.

Device-free fall detection utilizing WiFi Channel State Information (CSI) has emerged as a promising, privacy-preserving solution for elderly health monitoring in the Internet of Things (IoT) era. However, existing deep learning approaches suffer from severe performance degradation when deployed in unseen environments due to static background overfitting and Non-Line-of-Sight (NLoS) signal attenuation. To address these critical bottlenecks, we propose a robust, domain-generalizable framework featuring a novel Attention-Enhanced CNN-Transformer hybrid architecture. First, we design a physics-driven \textbf{Dynamic Variance Gate (DVG)} to dynamically calculate local temporal variance, acting as a soft-attention mask that eliminates static environmental DC components while amplifying dynamic human motion. Second, we introduce a Physics-Aware Data Augmentation strategy to force the network to learn invariant morphological signatures rather than environment-specific noise. Furthermore, a Convolutional Block Attention Module (CBAM) is integrated to refine spatiotemporal features prior to Transformer-based sequence modeling. Extensive cross-domain evaluations across four distinct indoor environments demonstrate that our method achieves 97.6% accuracy in NLoS scenarios and 98.8% in completely unseen environments without target-domain fine-tuning. Finally, we deploy the proposed framework on an edge computing system equipped with commercial WiFi NICs. Real-world live inference field tests confirm the system's robustness against unseen environmental layouts and its capability for continuous, low-latency whole-home safety monitoring.

Perception robustness under adverse weather remains a critical challenge for autonomous driving, with the core bottleneck being the scarcity of real-world video data in adverse weather. Existing weather generation approaches struggle to balance visual quality and annotation reusability. We present AutoAWG, a controllable Adverse Weather video Generation framework for Autonomous driving. Our method employs a semantics-guided adaptive fusion of multiple controls to balance strong weather stylization with high-fidelity preservation of safety-critical targets; leverages a vanishing point-anchored temporal synthesis strategy to construct training sequences from static images, thereby reducing reliance on synthetic data; and adopts masked training to enhance long-horizon generation stability. On the nuScenes validation set, AutoAWG significantly outperforms prior state-of-the-art methods: without first-frame conditioning, FID and FVD are relatively reduced by 50.0% and 16.1%; with first-frame conditioning, they are further reduced by 8.7% and 7.2%, respectively. Extensive qualitative and quantitative results demonstrate advantages in style fidelity, temporal consistency, and semantic--structural integrity, underscoring the practical value of AutoAWG for improving downstream perception in autonomous driving. Our code is available at: https://github.com/higherhu/AutoAWG

Image transmission and processing systems in resource-critical applications face significant challenges from adversarial perturbations that compromise mission-specific object classification. Current robustness testing methods require excessive computational resources through exhaustive frame-by-frame processing and full-image perturbations, proving impractical for large-scale deployments where massive image streams demand immediate processing. This paper presents DDSA (Dual-Domain Strategic Attack), a resource-efficient adversarial robustness testing framework that optimizes testing through temporal selectivity and spatial precision. We introduce a scenario-aware trigger function that identifies critical frames requiring robustness evaluation based on class priority and model uncertainty, and employ explainable AI techniques to locate influential pixel regions for targeted perturbation. Our dual-domain approach achieves substantial temporal-spatial resource conservation while maintaining attack effectiveness. The framework enables practical deployment of comprehensive adversarial robustness testing in resource-constrained real-time applications where computational efficiency directly impacts mission success.

Humans effortlessly perceive the present while remembering the past, yet streaming VLMs often trade off real-time perception against long-term memory. Prior work shows that shortening the context can sharpen current-scene perception at the expense of long-range recall. To reconcile these abilities, we introduce StreamTTT, which writes long-range history into online-updated fast weights outside the attention context. This leaves a short sliding key-value cache dedicated to recent evidence, mitigating attention dilution. We train StreamTTT jointly on offline long-video QA and a newly constructed real-time QA corpus. On OVO-Bench, under each model's reported input protocol, StreamTTT-4B outperforms the same-scale SimpleStream-4B by 0.6 points in real-time perception and 5.3 points in backward tracing. It also surpasses the larger SimpleStream-8B by 0.73 points on StreamingBench's Real-Time Visual Understanding (RTVU) subset. Our code is publicly available at https://github.com/zeyun-zhong/StreamTTT.