Single-Photon Avalanche Diode

Quantum communication underpins secure information processing and scalable quantum networks. In particular, remote state preparation (RSP) enables efficient quantum state transfer, but accurately estimating target states under complex noise remains challenging. Here, we propose a Transformer-based Quantum State Characterizer (TQSC) model for noisy RSP experiments. Our model reconstructs experimentally prepared pure and mixed photonic polarization states from noisy measurements in complex scattering environments, while its attention patterns provide physically grounded insights into correlations among the measured observables. The method achieves a mean estimator-target fidelity exceeding 99.999% under complex scattering and dynamic Gaussian noise, while its robustness and generalization are further examined using Qiskit-simulated Bloch-ball states.Furthermore, in a practical MNIST image transmission task with held-out states, the decoded bit error rate is reduced from 50.34% to zero after TQSC post-processing. The TQSC model enables accurate tomographic characterization under dynamic noise and provides physically grounded post-hoc insights, holding promise for intelligent quantum information processing applications.

Autonomous nano-UAV navigation requires accurate ego-motion estimation under stringent size, weight, power, and computing (SWaP-C) constraints, where visual sensors and LiDARs exceed payload limits, optical flow degrades in low-texture scenes, and inertial-only state estimation is susceptible to accumulated drift. While multi-zone time-of-flight (ToF) arrays provide a lightweight metric complement, 6-DoF estimation from merely 384 ranges per frame is challenged by invalid returns, anisotropic observability, and temporal computational scaling. We propose TIO-FORMER, a camera-free, optical-flow-free, and mapless range-inertial odometry framework driven by an IMU and an ultra-lightweight (15 g) payload of six orthogonal 8 x 8 ToF arrays. Our frontend pairs consecutive range grids with a bilateral gated difference, while IMU-guided cross-attention dynamically routes directional features conditioned on platform kinematics. A Streaming Causal Transformer couples an uncompressed Local KV cache with compressed Chunk-FIFO memory, maintaining bounded inference cost and memory footprint independent of flight duration. In real-flight evaluations, TIO-FORMER reduces open-loop position error by 54.4% compared to nano-UAV optical flow and by 66.4%-89.1% over learned inertial baselines. We also evaluate performance across multiple environments and robustness under severe sensing degradation. Deployed on an edge RISC-V companion computer, TIO-FORMER achieves a P95 latency of 10.466 ms and peak resident memory of 6.324 MiB (less than 5 percent system RAM), demonstrating that sparse range sensing provides practical geometric anchoring for resource-constrained micro-aerial robots. Code is available at https://github.com/Ly041021/TIO-Former.

Photonic neural networks (PNNs) offer efficient analog inference, but parameters optimized under ideal device models can degrade after fabrication, creating a persistent simulation-to-hardware (sim-to-real) gap. When many identically designed chips are deployed, calibrating each device from scratch compounds this cost. We propose Latent Chip Adaptation from Probes (LCAP), a population-informed framework that decomposes hardware adaptation into a transferable population correction and probe-inferred latent personalization. LCAP first learns a shared correction from 80 historical chips, then extracts a low-dimensional correction space from device-specific refinements. At deployment, 32 fixed unlabeled output probes infer an unseen chip's latent correction coordinates, enabling feed-forward personalization without target-device optimization. On a three-layer 64-mode MZI simulator with phase variation, beam-splitter errors, quantization, and crosstalk, accuracy improves from 80.4147% under direct deployment to 92.6860% after shared calibration and 93.3617% with LCAP. LCAP improves 27/30 unseen chips and raises worst-device accuracy from 89.18% to 90.54%.

Low-dose computed tomography (LDCT) measurements contain mixed Poisson-Gaussian noise. However, most self-supervised methods rely on generic image statistics and do not explicitly model this noise, which may limit their ability to effectively suppress realistic LDCT noise. To address this issue, we propose a physics-driven framework with cross-domain iteration for self-supervised LDCT denoising. The proposed framework proceeds in three main steps. First, a learned sinogram prior and the LDCT noise model guide posterior inference of photon counts, enabling separation of the Poisson and Gaussian components. Second, the separated Poisson and Gaussian components are respectively processed by binomial thinning and Gaussian data thinning to construct two branches, and residual scaling matches each branch's noise level to that of the observation, yielding a training pair with approximately independent noise realizations from one low-dose measurement. Finally, the pair is used to train an image-domain network whose forward-projected outputs update the prior. Through cross-domain iteration, the prior and the training pair are progressively refined while maintaining consistency with CT acquisition physics. Experiments on simulated data from AAPM, LIDC-IDRI, and LoDoPaB-CT and on real LDCT data show consistent gains over the evaluated self-supervised baselines across dose levels, with performance comparable to the evaluated supervised baseline.

Engineering inverse design is often limited by the high computational cost of iterative solvers for optimization problems constrained by partial differential equations (PDEs) and by their sensitivity to initialization. Deep generative models can produce candidate designs without rerunning the simulator at inference time. Generative adversarial networks (GANs) sample in one forward pass, whereas diffusion models require iterative reverse-time integration. In this work, we add conditional flow matching (CFM) to EngiOpt and compare it with a conditional diffusion model and a conditional generative adversarial network (cGAN) on structural (beams2d) and thermal (heatconduction2d) benchmarks from EngiBench using the same downstream optimization protocol. We use cumulative optimality gap (COG) and final optimality gap (FOG) as the primary metrics for evaluating the generated designs as warm starts for gradient-based refinement. On the evaluated EngiOpt implementations and two EngiBench tasks, CFM achieves the lowest measured COG, FOG, maximum mean discrepancy (MMD), and volume-fraction deviation on both tasks. CFM has mean volume-fraction deviations of 0.4% and 1.0% on beams2d and heatconduction2d, respectively, compared with 3.8% and 11.2% for diffusion. At Euler s = 16, CFM achieves 53.2 samples/s on beams2d, about 66 times the measured throughput of the evaluated diffusion baseline using 1000 network evaluations under the same timing protocol, with COG 1.182 +/- 3.126, compared with 1.173 +/- 3.100 for Euler s = 32. Across the two tasks, CFM produces warm starts with lower measured COG than both baselines and uses fewer network evaluations than diffusion.

Foundation models are increasingly being pursued in particle and nuclear physics, but existing approaches remain strongly tied to individual experiments through detector-specific architectures or pre-training objectives, limiting their reuse across sensing modalities. We show that a point cloud self-distillation framework yields a substantially more general sensor-level pre-training recipe. We show that the same refined architecture and objective can be independently pre-trained with minimal changes on three qualitatively different detector modalities: liquid argon time projection chamber (LArTPC), collider TPC, and water Cherenkov. Using 1,000 labeled images for downstream task adaptation, Panda V2 matches or exceeds specialized foundation-model baselines trained with orders of magnitude more supervision, matching state-of-the-art particle-clustering performance with 70x fewer labeled events on sPHENIX while substantially improving particle identification, and on LArTPC data matching Panda (arXiv:2512.01324) particle reconstruction with up to 1,000x fewer labels. Beyond reconstruction, simple linear probes reveal physically meaningful latent structure associated with particle causality and track curvature.

Language models have recently been applied to nanophotonic design, but it remains unclear whether they can reliably translate optical objectives into simulation-ready designs, execute electromagnetic analysis, and revise decisions from numerical feedback. We introduce HALO, a physics-aware framework that couples language-model planners with typed design specifications, electromagnetic simulation, diagnostic evaluation, and optional reuse of prior failure trajectories in an iterative design loop. We further introduce HALO-Bench, a 52-task benchmark spanning lab-derived, paper-derived, and open-ended nanophotonic design tasks under a shared evaluation protocol. We compare three planner configurations: a Fixed Structured Workflow, an Autonomous Structured Agent using the same simulation interface, and an Autonomous Coding Agent that directly writes and executes simulation code. The Fixed Structured Workflow is the most token-efficient and exhibits no observed code- or path-level failures, while autonomous coding can achieve higher task success with stronger models at the cost of additional operational failures. We also study reuse of prior failed trajectories. On targeted multi-round tasks, retrieved failure feedback reduces both iterations to first success and total token use. These results clarify the tradeoffs between explicit interfaces, autonomous execution, and reusable design experience in scientific agents.

Data-driven inverse design enables efficient generation of nanophotonic structures with prescribed optical responses, but spectrum-to-geometry mapping remains challenging due to non-uniqueness and fine geometric features. This work presents a two-stage deformable-convolutional framework for reconstructing metal--insulator--metal resonator geometries from 80-dimensional absorption spectra. The spectrum is projected to a $150\times4\times4$ latent representation and decoded into a $64\times64$ resonator mask. Training combines supervised reconstruction with least-squares adversarial refinement initialized from the best supervised checkpoint. A three-run ablation compares deformable convolution with plain convolution, involution, Dynamic Conv, and ODConv under the same architecture. The proposed model achieves $20.79\pm0.31$dB PSNR and $0.8501\pm0.0082$ SSIM, improving over plain convolution by 2.16dB and 0.0831, respectively. It further achieves Dice $0.9623\pm0.0027$, IoU $0.9342\pm0.0038$, and boundary F-score $0.9550\pm0.0027$. Spectral consistency evaluated using a frozen forward surrogate yields RMSE $0.0805\pm0.0013$ and $R^2=0.7923\pm0.0065$. Learned offsets show stronger adaptive sampling at coarse and intermediate decoder stages. Overall, deformable sampling with supervised initialization and adversarial refinement improves spectrum-conditioned geometry reconstruction.

Pixel permutation is a fundamental tool in image processing, image encryption, and data hiding (including watermarking and steganography) that rearranges pixels without changing their values. A common assumption in the literature is that permutation alone cannot create differential sensitivity; changing one pixel merely relocates that pixel in the output, producing no avalanche effect. This paper challenges this by introducing the Triangular Content-Aware Permutation (TCA) algorithm. The method extracts edge points using Canny and applies Delaunay Triangulation to edges and corners, creating a unique partition. Since triangulation is highly sensitive to image geometry, changing a single pixel alters the edge map, resulting in a completely different triangulation and global permutation pattern. Unlike classical dimension-based permutations and advanced content-aware methods (2025-2026), which lack differential sensitivity, TCA increases NPCR from near-zero to 97.10% solely through pixel relocation. Experiments on 50 images show that TCA, with an average of 14.81 iterations, achieves NPCR = 97.10% and UACI = 20.06%, proving pure permutation can create significant differential sensitivity. Conventional methods maintain near-zero NPCR. The iteration threshold varies from 6.4 to 30.7 based on content complexity. Low PSNR (11.93 dB) and near-zero correlation (~10^-3) confirm superior statistical performance. Although slower than classical methods due to triangulation, this is a deliberate trade-off for stronger security. Given the non-analytic, content-dependent nature of the pattern, TCA is ideal for reference-based encryption, fragile watermarking, and non-blind steganography.

Direct Time-of-Flight (dToF) sensors provide highly accurate metric depth and are more robust than indirect ToF systems in challenging real-world conditions. However, their high manufacturing cost and limited photodiode array size produce depth maps that are extremely sparse, low-resolution, and noisy, making them unsuitable for VR/XR, robotics, and 3D perception tasks that require dense metric depth. Existing monocular and depth completion methods struggle to handle the unique sampling patterns and hardware artifacts of dToF devices, and their performance often deteriorates significantly under severe sparsity or noise. We present a generalizable framework for dense metric depth completion from sparse dToF measurements, capable of operating across diverse sensor types, sparsity levels, and noise conditions. Our model employs a depth-guided dual-branch Vision Transformer encoder that processes RGB images and sparse dToF measurements separately, while a masked joint attention module allows depth tokens to reliably guide image features without being overwritten by them. A lightweight decoder reconstructs dense metric depth efficiently, without diffusion-based or refinement-heavy post-processing. To address the scarcity of paired training data, we introduce a comprehensive dToF simulation pipeline that reproduces the characteristics of flash, sub-VGA flash, and rotating sensors, including hardware-induced degradation, irregular sparsity, and realistic noise distributions. Trained entirely on synthetic data, our model achieves strong zero-shot generalization across 6 datasets and 3 real dToF devices, outperforming state-of-the-art approaches in both accuracy and computational efficiency. This establishes a robust and practical solution for dense metric depth completion from sparse direct ToF sensors. Our code and models are open-sourced. See https://vclab.kaist.ac.kr/cvpr2026p3.

The rapid development of photonic integrated circuits (PICs) is shifting the design flow from traditional graphical user interface (GUI)-based methods to script-based methods for higher flexibility, portability, and maintainability. However, script-based design introduces new challenges, requiring designers to possess additional proficiency in tool application programming interfaces (APIs) and programming. It also demands greater effort and time because it is inherently less intuitive and more complex than GUI-based methods. As PICs grow in scale and complexity, the productivity gap between design needs and manual scripting capabilities continues to widen. To address this gap, we introduce PICopilot, the first large language model (LLM)-based agentic framework that assists in PIC design via automated design script generation from natural language instructions. PICopilot leverages a multi-agent architecture with a feedback mechanism and a specifically designed retrieval-augmented generation (RAG) pipeline, achieving a high success rate and reliability. Experimental results on a benchmark of diverse PIC scripting tasks demonstrate that PICopilot successfully completes all 48 tasks and outperforms other LLM-based approaches without incurring substantial extra latency or cost, even solving 21 more tasks than the advanced GPT-5 model with a general RAG pipeline.

Optical flow remains challenging in high-speed and low-light scenes, where the limited frame rate and sensitivity of conventional cameras lead to motion blur and underexposure. Single-photon avalanche diode (SPAD) cameras offer single-photon sensitivity and extremely fine temporal sampling. However, individual slices in these high FPS binary photon streams are too sparse for dense correspondence. Temporal aggregation can provide the spatial cues required by optical flow, but accumulating photons at fixed coordinates blurs moving structures. Motion-aware aggregation can reduce this blur, yet it depends on the flow being estimated. To address this dependency, we propose QuantaFlow, the first method for dense optical flow directly from SPAD streams. Instead of constructing a fixed input representation, QuantaFlow embeds SPAD representation construction into iterative flow refinement. At each iteration, the current flow coarsely aligns the slices within the source and target sub-streams. A photon-flux transformation then constructs multi-scale representations containing intensity and structural cues, while adaptive multi-scale fusion balances photon noise and residual motion blur at each pixel. The fused representations drive a feature-warping flow update, and the refined flow guides representation construction in the next iteration. We further construct a synthetic dataset for SPAD optical-flow training and evaluation. Experiments on the synthetic dataset and real-world SPAD data demonstrate the effectiveness and generalization of QuantaFlow.

Single-photon avalanche diode (SPAD) cameras are promising for low-light and high-dynamic-range intensity imaging, but their practical use is limited by complex sensor-specific noise. Unlike time-correlated single-photon counting (TCSPC) systems, SPAD cameras record whether at least one detection occurred in each gate without photon timestamps in intensity imaging mode, making explicit noise decomposition difficult. We present a practical noise modeling and calibration framework for SPAD intensity denoising. Our forward model describes binary-frame accumulation with a Binomial observation process, models signal-independent dark noise as an exposure-dependent pure dark count term plus an exposure-independent dark-frame bias term, and incorporates pixel-wise response non-uniformity. We design a dedicated calibration procedure for the proposed model and use it to build a count-domain noise-synthesis pipeline for network training. For denoising, we further design a SPAD-specific dark-shading correction (SPAD-DSC) to remove most systematic noise before network training. We construct a real-world SPAD intensity dataset for testing. Experimental results demonstrate the superiority of the proposed noise model.

Transcranial focused ultrasound (tFUS) is a non-invasive technique that delivers focused acoustic energy through the skull for neuromodulation and therapeutic applications. However, the heterogeneous structure of the skull induces complex, patient-specific phase and amplitude aberrations that distort the acoustic focus and deviate it from the intended target, compromising therapeutic efficacy and safety. Conventional time-reversal (TR) simulations can correct these aberrations but rely on computationally expensive full-wave solvers, making them impractical for real-time use and iterative treatment planning. We propose a few-shot deep surrogate framework that predicts per-element phase and amplitude corrections for a 96-element 3D phased-array transducer from patient CT images. A geometry-aware encoder extracts skull-path features shared across dedicated phase classification and amplitude regression branches, where phase periodicity is handled via circular expectation decoding. The framework is pretrained on diverse skull geometries and fine-tuned with only ten target points, enabling rapid adaptation to unseen patients without full patient-specific simulation. Evaluated via leave-one-out cross-validation across 12 skulls, it achieves a mean phase CMAE of 0.155 rad and amplitude rMAE of 9.089%, a focal centroid error of 0.467 mm, Dice score of 94.422%, and peak pressure ratio of 92.332%, with an approximately 2,535 times speedup over TR simulation. The code is available at https://github.com/Minju-Seol/fewshot-tfus-correction.

PET provides functional images relying on two-photon coincidences from positron-electron annihilation. In human tissue, about 40% of annihilations are preceded by Ps formation, of which o-Ps component partially decays into three photons, with the remainder annihilating via pick-off or spin-exchange into two photons. This three-photon channel carries additional information about the surrounding micro-environment, including the three-to-two-photon yield ratio as a potential diagnostic marker. We propose the TRIO algorithm, a novel three-photon event-by-event image reconstruction algorithm formulated as a Bayesian maximum a posteriori inference problem. TRIO unifies time-based trilateration, energy-based reconstruction and, for the first time, a physics-informed prior derived from the QED description of Ps decay within a single probabilistic framework. In contrast to positronium lifetime imaging, which requires a prompt photon and is therefore restricted to specific radionuclides, TRIO relies solely on the three photons and is fully compatible with standard radionuclides such as 18F. Monte Carlo simulation modelled after the Siemens Biograph Quadra scanner demonstrates a mean position error of 1.62~cm, improving by approximately a factor of two over the time-based trilateration (3.05 cm) and by about an order of magnitude over energy-based reconstruction alone (18 cm). More importantly, the proposed Bayesian approach is compatible with existing TOF-PET scanners that can register three-photon annihilation coincidences.

We present PixCell, a neurosymbolic system in which multimodal agents convert a visually presented photonic component into a parametric program over a small domain-specific language (DSL) of geometric primitives. A system enabling deterministic visual verification renders evaluation asymmetrically cheaper than the generation attempt. While models using multi-seed sampling and iterative revision reach a mean best-turn IoU of only 0.416, multimodal agents through PixCell's interface and verifier consistently exceed 0.9 mean IoU, with scores reaching 0.974 and 0.955 across eight component targets while also satisfying source contracts. These results demonstrate that frontier multimodal agents can reliably understand and render executable parametric representations from visual targets. Using these live parameters, cross-stack studies on an interferometer reconstruct primitive programs that satisfy an 8.0 nm free spectral range target and the original footprint constraint on modeled 220-nm SOI, 400-nm SiN, and 400-nm TFLN stacks. PixCell further carries a paper-derived splitter from visual reconstruction through SOI full-wave simulation, producing symmetric propagation and balanced outputs. Finally, the same executable verifier supplies a training reward and dataset used to train a Qwen3.6-35B-A3B model with LoRA and GRPO without supervised demonstrations. On eight training-excluded paper figures, its mean champion IoU rises from 0.422 after eight initial attempts to 0.491 after three verifier-guided revision rounds. These results therefore establish a controlled framework for measuring, retargeting, and improving visual-to-parametric photonic component design.

Photonic-crystal surface-emitting lasers (PCSELs) can combine high-power operation with narrow-divergence surface emission, but optimizing coupled parameters requires costly full-wave simulations. Deep Q-network (DQN) optimization can reuse simulated transitions to guide edits, yet which value-learning mechanisms remain reliable under tight simulation budgets is unknown. We address this gap by comparing baseline DQN and six value-based variants for a seven-variable PCSEL design under a shared objective, simulator, 83-call budget, and four matched initializations. Beyond endpoints, we analyze sample efficiency, policy behavior, and physical response to separate learning gains from favorable starts or exploratory jumps. Dueling DQN is the only variant to improve all four seeds. Relative to the first evaluated designs, its selected structures increase the mean quality factor () from to (), reduce wavelength error by 64%, and increase upward power by 47%; compared with baseline DQN, they achieve a higher mean under the same budget. Other variants yield no consistent improvement; Double DQN reproduces baseline trajectories, while Rainbow-lite shows high upside but strong seed dependence. These results identify Dueling DQN as the most reliable configuration tested for simulation-budget-limited PCSEL inverse design and provide a reproducible framework for attributing algorithmic gains in scientific optimization. The source code is publicly available at https://github.com/Longying-Wen/PCSEL-RL.

Photonic reservoir computing is a promising physical machine-learning technique for predicting time-series data. The quantization of the response signal from the reservoir is required for the implementation of photonic reservoir computing, and the number of quantization bits and sampling frequency need to be optimized to achieve high performance and low energy consumption. However, few studies have been reported to investigate the effect of bit quantization and sampling frequency. In this study, we introduce a concept of approximate reservoir computing with a semiconductor laser by quantizing the amplitude of node states in the reservoir and output weights. We evaluate the performance of a chaotic time-series prediction task and energy consumption per sample. We achieve significant reduction of energy consumption by optimizing the number of quantization bits, the sampling frequency, and the injection current of the semiconductor laser, while maintaining the prediction performance.

Quantum devices are open systems whose dynamics interleave coherent evolution with dissipation, and benchmarking, error mitigation, and error correction all rest on a faithful model of both. Existing characterization protocols either assume prior knowledge of the interaction and noise structure, or demand ancillas, entangled probes, or mid-circuit control, or capture only the Pauli-diagonal part of the noise. Here, we present a protocol that reconstructs an arbitrary sparse Markovian generator, including every Hamiltonian together with the jump operator coefficients, using only product Pauli state preparation, single uninterrupted forward evolutions, and product Pauli measurements. Given a sparsity budget $M_0$ and a strength bound $Γ$ of the Lindbladian, every coefficient is learned to precision $ε$ from $\widetilde{O}(Γ^2M_0^2/ε^4)$ experiments and $\widetilde{O}(ΓM_0^2/ε^2)$ total evolution time, with both supports identified from data without locality assumptions. The protocol runs at a logarithmic number of positive evolution times on a hardware clock lattice and is provably robust to calibrated state-preparation and measurement errors.

Near 1310 nm photonic-crystal surface-emitting lasers (PCSELs) are attractive narrow-beam sources for optical communication and sensing, but their final design refinement is costly. Small geometry changes simultaneously shift the band-edge resonance, cavity leakage, far-field divergence, and the numerical stability of a high-$Q$ decay fit, while every full-wave trial requires a time-domain simulation. We couple a commercial finite-difference time-domain solver to a reliability-aware Bayesian optimization (BO) loop over eight local design variables. Each completed simulation updates the surrogate used to choose the next geometry. Candidate ranking combines wavelength and beam-quality requirements with a reliability-adjusted metric $Q_{\mathrm{eff}}$ derived from the solver-reported relative fit-error estimate $dQ/Q$. Across three 80-evaluation runs from the same reference model, BO produced 5--15 candidates per run that passed the joint filter. Designs reconstructed from fresh model copies retained $Q_{\mathrm{eff}}=4.33\times10^6$--$7.76\times10^6$, a 60--108-fold increase over the baseline metric, at 1308.23--1310.90~nm with approximately $0.84^{\circ}$ divergence. Under equal budgets, BO gave the highest mean strict-filter yield (9.0 candidates), compared with differential evolution (7.0) and Latin-hypercube sampling (1.5), although the controls occasionally matched the peak $Q_{\mathrm{eff}}$. Field maps, resonance spectra, and local perturbations further identify an index-related wavelength handle and a hole-size-related leakage handle. The resulting FDTD budget produces a pool of wavelength-compatible, narrow-beam, and reproducible high-$Q$ PCSEL candidates without trusting a single optimistic decay fit.

Physical noise in near-term quantum hardware is usually treated as a nuisance to suppress. We ask whether it can instead act as a hardware-native regularizer for photonic hybrid quantum-classical neural networks (PHQCNNs), analogous to noise-injection regularization in classical deep learning. Using Quandela's Perceval simulator and the MerLin framework, we build PHQCNNs for Iris, Digits, and MNIST and inject Perceval's seven-parameter physical noise model directly into training. A genetic algorithm searches the six continuous noise dimensions and 1 boolean parameter to find, per dataset, the configuration maximizing validation accuracy, compared against a noiseless baseline across five seeds. GA-tuned noise yields modest accuracy gains on Iris (+0.82pp) and Digits (+1.45pp), but a clear degradation on MNIST (-1.21pp). Per-parameter sweeps show that no individual noise parameter is consistently beneficial, motivating the joint search, while a second-order loss expansion shows that physical noise induces a Tikhonov-like regularization term whose effect is dataset-dependent. Physical photonic noise can thus act as a free regularizer, but not universally.

Sparse-support uncertainty is usually quantified by treating the dictionary as known, an assumption that can produce overconfident, label-dependent conclusions when the dictionary is learned from latent sparse mixtures. Near collisions of coherent atoms, a test signal may identify the active physical group even though the training data cannot distinguish the physical rays within it. We develop inference for active physical rays, unit atoms modulo sign, after latent dictionary learning. In a fixed-dimensional Gaussian train-test experiment, we retain all dictionaries compatible with a robust training-moment region, profile the test representation over them, and project surviving configurations onto a permutation-invariant support space. The resulting confidence correspondence can report cross-sheet inconclusiveness, group resolution with child ambiguity, or fine-support resolution. We characterize both its statistical cost and decision-theoretic benefit. Residual block orientation first affects the latent training density at cubic order, yielding information of order $s^6$, where $s$ is the within-block collision scale. The correspondence provides high-probability-over-training conditional test coverage, with resolution governed separately by parent detectability, test-time support separation, and learned-dictionary orientation. In the resolved fixed-shell regime, its projective Hausdorff diameter contracts at the minimax-optimal rate $s \wedge (\sqrt{N}s^2)^{-1}$, up to constants. A restricted-task theorem further determines when coefficient asymmetry allows test replication to supplement training information and when calibration uncertainty remains irreducible. The framework thus yields honest, resolution-adaptive support statements and guides the allocation of training versus test measurements.

Low-Gain Avalanche Diodes (LGADs) and AC-coupled Low-Gain Avalanche Diodes (AC-LGADs) are promising technologies for precision timing and four-dimensional tracking. In AC-LGADs, the AC pad is coupled to the resistive n$^{+}$ layer through a dielectric layer, while the gain layer remains unsegmented. This structure provides a 100% fill factor and enables good spatial resolution with a relaxed readout pitch. The same signal-sharing mechanism that makes interpolation possible complicates the readout: charge spreads across multiple pads, the useful information can approach the electronic-noise threshold, and matrix-inversion approaches can become computationally challenging and sensitive to off-diagonal noise. In this work, we study machine-learning-based reconstruction and compression for resistive silicon sensors. We use full-waveform information from correlated pads to regularise the reconstruction and extract spatial information beyond what is available from binary readouts or reduced-amplitude summaries. We first introduce recurrent neural network models based on LSTM layers, which provide a proof-of-concept implementation for full-waveform reconstruction and have been tested for FPGA deployment using \hls. We also study routes towards bandwidth reduction with waveform rasterisation and window-selection methods, and extend the approach beyond the first model to topology-agnostic transformer-based architectures that use pad coordinates as part of the input. These models are designed to support arbitrary pad counts and geometries, mitigate edge distortions, preserve approximately $10~μ\mathrm{m}$ position resolution for $500~μ\mathrm{m}\times500~μ\mathrm{m}$ pitched sensors, and guide future resistive-silicon sensor designs

We demonstrate that AI-driven program synthesis can autonomously discover fundamental strategies for decomposing unitary matrices in photonic networks. By extending DreamCoder to complex-valued linear algebra, the system generates decomposition programs achieving the minimal $N(N-1)/2$ Mach-Zehnder interferometers, distinct from both Reck and Clements architectures. Learned programs encode dimension-agnostic invariants: strategies discovered for $5 \times 5$ matrices generalize to higher dimensions such as $64 \times 64$. The discovered programs encode interpretable, dimension-agnostic construction rules. These rules generalize across matrix sizes without retraining, demonstrating that autonomous program synthesis can serve as a scalable paradigm for algorithm discovery and the automated design of universal unitary operators. Beyond universal decompositions, the system automatically exploits matrix structure to reduce the interferometer count below the universal theoretical bound. For instance, for Householder matrices, it discovers a dimension-independent rule that requires only $2N-3$ MZIs. This achieves linear, rather than quadratic, scaling and generalizes to arbitrary $N$ without retraining. For matrices obtained from the singular value decomposition of sparse matrices, reductions generally increase with sparsity, reaching up to 38% fewer MZIs than the universal theoretical bound $N(N-1)/2$ at 95% sparsity. These MZI reductions translate directly into practical hardware benefits for scalable photonic implementations. Taken together, the system functions as a single unified engine that discovers both universal decomposition rules and matrix-specific optimizations, without being provided with the structural or analytical properties of the input matrices.

The inverse design of physical systems governed by partial differential equations is computationally demanding due to the high dimensionality and non-convexity of design spaces. Generative models for inverse design often lack robustness and transferability, whereas evolutionary strategies are robust but struggle in high-dimensional spaces. This paper introduces a Neural Operator-enabled Topology-informed Evolutionary Strategy (NOTES) that integrates dimensionality reduction, representation learning, and evolutionary optimization for efficient and transferable inverse design. NOTES couples a DeepONet-based neural operator with the Covariance Matrix Adaptation Evolution Strategy (CMA-ES) to perform global optimization in a compact latent space that encodes topology-aware priors while discovering high-performance designs for unseen operating conditions. Applied to nanophotonic beam-deflector inverse design governed by Maxwell's equations, NOTES reduces the design dimensionality from 256 to 25 and consistently achieves over 95 percent efficiency, outperforming CMA-ES, topology optimization, and other baselines. Applied to structural optimization, NOTES discovers designs that achieve compliance down to 246. By decoupling topology learning of a DeepONet from the governing physics in a PDE solver, NOTES provides a flexible and transferable framework for the inverse design of physical systems.

This paper presents a machine learning framework for data-driven inverse design of V-beam thermal sensors. The goal is to determine the optimal sensor geometry: beam inclination angle, beam length and beam width that achieves a target displacement under a given temperature. The design should also provide the geometry with minimum structure volume and minimum mechanical stress the sensor must support. This problem is ill-posed as for a given displacement there are multiple possible geometric configurations, causing direct regression methods to fail. We document a series of five exploratory trials that progressively revealed the nature of the problem culminating in a two-phase solution: a neural network forward model trained to map geometry and material constants to sensor responses, a gradient-descent inverse optimization over the frozen forward model, minimizing stress and volume simultaneously. The proposed pipeline utilizes a 3000-sample dataset and achieves a MAPE of 4.76% for predicting the displacement, more than 70% of predictions having MAPE of under 5%.

Single-Photon Avalanche Diode (SPAD)-based Light Detection and Ranging (LiDAR) is emerging for autonomous vehicles due to its high sensitivity and precise depth sensing capabilities. However, flare caused by excessive photon returns or pile-up effects can lead to incorrect depth estimation and exaggerated boundaries in point clouds, resulting in severe distortions of geometric measurements, making flare suppression essential for safety-critical applications. Existing flare mitigation methods primarily operate at the hardware or signal-processing levels. While effective under specific configurations, they are largely rule-based and configuration-dependent, lacking learnable representations that generalize across diverse sensing scenarios. In this work, we reformulate flare suppression as a semantic segmentation problem, enabling data-driven learning of geometric and photometric cues directly from SPAD measurements. We first benchmark representative segmentation models on the newly introduced SPAD flare dataset and observe that they struggle to exploit the intrinsic multi-echo characteristics of SPAD signals. Motivated by this observation, we propose Physically-Informed segmentation for LiDAR Flare (PILF), a learning-based approach that treats the first and second echoes, together with ambient illumination, as distinct modalities, aggregating cross-echo information while jointly encoding geometric and photometric features. Experiments across multiple real-world scenes demonstrate that PILF significantly outperforms compared segmentation models, achieving up to 79.32% mIoU, and providing an effective solution for SPAD-based LiDAR flare suppression.

Silicon photonics enables integration of optical components using standard semiconductor processes, greatly improving data communication bandwidth and energy efficiency. However, photonics integrated circuits (PICs) face unique security challenges, such as counterfeit or tampering threats, that conventional electronic security methods do not address. We propose a novel hardware fingerprinting technique that embeds two dimensional photonic crystal patterns into the density control filler regions of a PIC. Each PhC pattern is designed to resonate a specific visible to near infrared wavelengths, producing a distinctive optical signature (based on wavelength, polarization, and incident angle) for each device. Finite difference time domain (FDTD) simulation using ANSYS Lumerical is employed to optimize nanostructure dimensions and spacing so that each device's reflection/absorption spectrum contains unique narrowband peaks. No extra fabrication steps or materials are required beyond standard lithography, keeping costs low. The embedded nanostructures have sub-50nm precision, making forgery extremely difficult. Our method yields a high resolution, scalable fingerprint for silicon photonic chips, enabling cost-effective device authentication and improved supply chain security.

Direct time of flight (dToF) measurements are susceptible to errors because of system-level and circuit-level timing jitters. In addition, device-level uncertainty stemming from the dark noise of single-photon avalanche diode (SPAD) contributes to the aggregated error. We demonstrate that perimeter gating can help reduce the device-level detection inaccuracy for SPAD devices by reducing the dark noise probability. Specifically, in this work, we developed a general framework to accurately estimate the dToF jitters stemming from different source levels and analyzed a counter-based time to digital converter (TDC) circuit that are commonly used in such systems. We have also measured dToFs using a perimeter-gated SPAD (pg-SPAD) detector fabricated in a 0.35 $μ$m standard CMOS process. Experimental results show that pg-SPADs can improve measurement accuracy in both free-running and time-gated operations.

We present a design agent which is a Large Language Model (LLM) that orchestrates, but does not perform, the numerical simulations to design a silicon-on-insulator (SOI) $2\times2$ directional coupler. We choose a symmetric phase-matched coupler where a lot of analytical results are available that help the design strategy. The LLM proposes candidate gap values (a geometrical dimension size) and judges convergence, while all physics is owned by deterministic solvers: a frequency-domain eigenmode solver estimates the coupling coefficient~$κ$ for the current design, and an independent Finite-Difference Time-Domain (FDTD) stage validates it. Both solvers operate on a common slab-projected two-dimensional (2D) effective-index reduction of the silicon film, so the design~$κ$ and the FDTD response are consistent by problem design; the residual between them is shown to be a single constant phase offset~$φ$, attributable to a fixed excess coupling length $L_{\mathrm{extra}}=\SI{2.837(11)}{\micro\meter}$ that we find invariant across a factor-of-two range in~$κ$. Folding this offset into a closed-loop length correction, the agent delivers a $50/50$ splitter whose FDTD-measured cross fraction is $0.498$ (target $0.500$), a residual of $0.0017$. Results are made self-consistent within the 2D effective-index model; and the LLM succeeds in delivering a suitable design over a number of attempts.

Photonic quantum machine learning offers a route to trainable physical representations built from phase, interference and measurement. However, its role in scientific machine learning remains largely unexplored. Physics-informed neural fields provide a natural setting, because differential equations require trial spaces that preserve phase, frequency and derivative structure. Here we introduce a photonic quantum neural field in which coordinates become trainable optical phases, are mixed by multi-photon Fock-space interference and are decoded from photon-number measurements. The photonic circuit is optimized as the neural-field representation itself, not as a fixed feature map or hardware accelerator. Photonic measurement is therefore a trainable representation on which the physics-informed residual is minimized. Across seven elliptic, wave, nonlinear dispersive and inverse PDE benchmarks, we observe a phase-complexity transition: classical coordinate and Fourier-feature networks suffice in smooth regimes, whereas the photonic field is most accurate when residual derivatives amplify phase mismatch. In the hardest regimes it gives the lowest errors, with margins reaching an order of magnitude and about one quarter of the trainable parameters of classical baselines. Frozen and shuffled controls, together with noise stress tests, attribute this gain to learned interference and stable Fock-probability readout under compound perturbations. These results identify photonic quantum measurement as a representation-learning principle for scientific machine learning.

Single-photon LiDAR (SPL) based on single-photon avalanche diode (SPAD) sensing enables time-resolved photon measurements with extreme sensitivity, offering unique potential for active 3D perception in photon-starved scenarios.However, real-world single photon perception remains fundamentally challenging due to unique measurement noise and complex multi-return transient phenomena, which jointly complicate geometric reconstruction and semantic scene understanding. Despite growing interest in SPAD-based sensing, existing studies are largely limited to simulated data or small-scale controlled captures. As a result, systematic evaluation of real-world single photon perception across depth estimation, multi-view reconstruction, and 3D semantic understanding remains underexplored. To bridge this gap, we introduce SP-TransientBench (STB), a real-captured multi-task benchmark for single photon perception. SP-TransientBenc comprises 10 diverse scenes and 10,297 views captured using a solid-state single-photon LiDAR at $256\times192$ resolution. Each view provides full time-of-flight histograms with multi-return behavior,standardized metadata, and calibrated camera poses for multi-view evaluation. We further provide 13-class 3D semantic annotations for selected scenes. By providing dedicated data splits and evaluation protocols for each task, STB enables consistent and reproducible benchmarking of real-world single photon perception across multiple 3D vision problems. The dataset and code will be released upon acceptance.

We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.

Time-of-flight cameras are popular in robotics because they provide direct depth information and are compact, inexpensive, and less dependent on ambient visible light. However, their low spatial resolution and depth noise raise questions about their suitability for stabilizing fast, unstable dynamics. In this paper, we show that an inexpensive, low-resolution time-of-flight camera can provide angle feedback for reliable and precise balancing of an inverted pendulum on a cart, a canonical control benchmark. These results open the door to using compact, inexpensive, low-resolution time-of-flight cameras for precise feedback control of fast, unstable systems.

During warhead detonation, high-density, high-speed, and mutually occluded fragments are generated. Their mechanical parameters (position, velocity, kinetic energy) directly determine the lethality of the warhead fragment field. However, high-intensity flash and smoke in detonation scenarios severely hinder the accurate acquisition of these mechanical parameters. To address this challenge, this paper integrates experimental mechanics approaches and presents an event-driven method for reconstructing the dynamic trajectories of fragments and measuring their mechanical parameters. As a novel brain-inspired visual sensor, event cameras offer microsecond-level temporal resolution and high dynamic range lighting change perception, overcoming the difficulty of accurately measuring high-speed targets under strong flash interference. The method constructs a multi-event-camera vision system, adopting three geometric constraints: time-correlated epipolar constraint to find potential matching event point pairs, and trifocal tensor line constraint plus local homography constraint to eliminate mismatches. A comprehensive probability model is established, with entropy weight method determining the weight of each constraint's probability to quantitatively filter mismatches. 3D trajectory reconstruction is achieved via spatial line-line intersection and nonlinear optimization. Finally, the velocity and kinetic energy of the fragments are calculated based on the reconstructed trajectory. This method provides reliable technical support for the mechanical damage evaluation of warhead fragment fields and the tactical protection design.

Neural field surrogates can accelerate photonic design loops, but a surrogate that looks accurate in global field error can still mis-rank candidate devices when the final decision depends on localized output-port readouts. This risk is acute in propagation-dominated MMI splitters and couplers, where port power, splitting, phase, and coupling are determined by accumulated modal interference and output-window aggregation rather than by average field similarity alone. We study this field-to-design mismatch through a Field/Mediator/Readout view that separates dense complex-field error from propagation-profile and output-window errors before port aggregation. To align the surrogate with this chain, we propose PaNO, a propagation-aligned neural operator that keeps the full-field prediction interface while organizing latent states around local boundary structure, transverse modal content, axial propagation, and cross-mode interaction. We also evaluate PaNO-R2, an output-aware feedback variant for residual field components near the port region. On a 15-wavelength tunable $3{\times}3$ MMI benchmark with 4608 held-out fields, PaNO lowers NeurOLight's port-power error from 0.2018 to 0.0739 despite slightly higher cMAE, showing that global field accuracy alone is not sufficient for design-relevant readout fidelity. PaNO-R2 attains the best cMAE, propagation-profile error, output-profile error, and port-power error, reducing NeurOLight's port-power and output-profile errors by 72.7% and 72.5%.

Photonic crystal fiber (PCF) inverse design remains challenging because candidate geometries must satisfy coupled optical targets under expensive electromagnetic simulation. Existing pipelines improve surrogate prediction or one-shot parameter recommendation, but they do not accumulate reusable design knowledge across iterative trials. We formulate PCF inverse design as a memory-policy learning problem and propose SkillPCF, a closed-loop agent framework that combines a physics-guided memory skill bank, reinforcement-learned skill selection, and simulator-grounded skill evolution. We further construct a real-world dataset with 479 expert interaction traces (2,507 spans) and 553 memory-dependent evaluation queries covering dispersion engineering, loss optimization, and multi-objective design. Experiments across multiple LLM backbones and classical baselines show that SkillPCF achieves stronger design-quality and efficiency trade-offs under practical simulation budgets, demonstrating the effectiveness of our proposed memory-skill learning paradigm for physics-aware PCF inverse design.

AI tools to support real world decision making must be able to build simulation models that inform their recommendations and render them interpretable. Tools that can automate aspects of modeling practice must complement human expertise, not replace it. The BEAMS Initiative aims to guide the development of AI tools for modeling and simulation toward forms that are responsible and ethical by establishing benchmarks for human centered modeling and simulation practices. The initiative uses open digital and organizational infrastructure to collaboratively evaluate AI tools for modeling and simulation. The open source sd ai project hosted by the initiative establishes transparency and enables contributions to be shared broadly. A steering group focuses on prioritizing potential benchmarks, while a technical group focuses on implementing the benchmarks in the form of automated tests. Tests for several distinct categories of evaluation have been implemented and applied to AI tools that support qualitative model building, quantitative model building, and model discussion. These include tests for causal translation, model iteration, causal reasoning, conformance, model behavior explanation, suggested model building steps, and suggested model fixes. When engines from the sd ai project are coupled with different LLMs, their performance on these evaluations reveals variability across different AI tools. The evaluations implemented by the initiative demonstrate that AI enabled modeling tools perform better at discussion and basic qualitative tasks than with causal reasoning and quantitative error fixing. No single LLM dominates across engine types, highlighting the importance of specific tasks and tradeoffs between speed and accuracy. Ongoing efforts of the initiative aim to incorporate benchmarks that address concerns about bias by considering alternative perspectives and human centered use cases.

In modern nuclear physics experiments, identifying events of interest is challenging for nuclear reaction studies with the active target Time Projection Chamber (TPC). In this work, machine learning techniques are employed to analyze the complex data of the 12C + 12C fusion reaction from a TPC named MATE (multi-purpose active-target time projection chamber for nuclear experiments). Specifically, we successfully applied Residual Neural Network (ResNet-50, ResNet-34 and ResNet-18) and Visual Geometry Group (VGG-19) to classify elastic scattering and fusion reaction events from the 12C + 12C reaction. The classification results of the four models are nearly identical, with accuracies of approximately 97% for the simulated data and 90% for the experimental data. Moreover, these approaches successfully identify some events that are misclassified by traditional methods. These models are also applied to classify events from different fusion reaction channels, with classification accuracies of approximately 95% on simulated data. In addition, a Convolutional Neural Network (CNN) model is developed to reconstruct the reaction vertex, providing an alternative strategy for vertex reconstruction. These results indicate that machine learning techniques can effectively classify reaction events from different channels and reconstruct the reaction vertex, thereby paving the way for future analyses of complex nuclear reaction data.

The goal of this work is to reduce the effect of photon noise in dental cone-beam CT reconstruction. We consider an inverse problem formulation and develop a databased prior. To this end, we simulate fan-beam acquisitions and add photon noise to the projection data. The prior is obtained by training a gradient-step denoiser using reconstructed simulated acquisitions. The trained model is integrated into a plug-and-play gradient-step algorithm to reconstruct images from simulated projections. Experiments on synthetic data demonstrate the denoising capabilities of the trained model, while qualitative evaluations on real images showcase the algorithm's performance and generalization ability.

Scintillation detectors with excellent timing resolution enable more precise localization of radiation sources in positron emission tomography, leading to substantial improvements in diagnostic capability for diseases such as cancer and dementia. At the extreme timing precision required for such applications at the picosecond scale, detector performance is governed by the microscopic dynamics of scintillation photons generated within the detector and their subsequent detection processes. However, detector signals have conventionally been treated only as collective responses of many photons due to structural constraints inherent to photodetectors. In this study, we overcome this fundamental limitation using deep learning, enabling direct access to the timing information of individual photons. The proposed method estimates photon-by-photon arrival times directly from detector waveforms without requiring any modification to the detector structure; the method operates on an event-by-event basis without ground-truth labels by integrating an unsupervised learning framework with a physically informed detector-response model. Through comprehensive validation combining Monte Carlo simulation and experimental measurements across various detector configurations, we experimentally demonstrate improved timing resolution, visualized depth-of-interaction-dependent photon transport, and classified Cherenkov and scintillation photons based on the estimated photon-level timing information using a unified deep learning-based framework. These results provide experimental access to photon dynamics, bridging the gap between theoretical modeling and experimental observation, and they open a new data-driven pathway for discovery in detector physics and optimization.

Spatial photonic Ising machines (SPIMs) based on spatial light modulators (SLMs) have emerged as highly effective solvers for many tasks, including combinatorial optimization problems and spin-glass simulations. However, traditional SPIMs relying solely on the simulated annealing algorithm require a large number of measurement-feedback iterations to find a relatively optimal solution in complex energy landscapes, suffering from slow convergence and high time cost. Here, we propose an optical genetic-simulated annealing hybrid algorithm to accelerate the ground-state search of SPIMs. GA conducts a global coarse-grained search in the early iteration stage, while SA performs fine-grained local refinement in the late stage. Numerical simulations show that our method enables a higher solution quality of full-rank Max-Cut problems than pure GA or SA at different scales. We also experimentally demonstrate its superiority over conventional algorithms on a gauge-transformation time-division multiplexing SPIM for high-rank optimization problems under the same iteration budget. Our approach can be further developed with other advanced metaheuristic algorithms toward intelligent optical Ising computing systems.

Photonic quantum computing is a promising platform for scalable quantum machine learning, but designing effective hybrid architectures remains challenging under hardware and optimization constraints. Existing approaches rely on manually tuned architectures that fail to account for the collaboration between classical preprocessing, phase encoding, and photonic circuit structure, limiting both accuracy and hardware compatibility. In this paper, we propose a neural architecture search framework for hybrid photonic quantum-classical models that combines genetic algorithm-based search with learnable quantum phase encoding to systematically explore the joint design space of classical and quantum components. Our framework encodes 19 hyperparameters across six gene groups and evolves a population of hybrid architectures using group-based crossover, per-gene mutation, and elitism, evaluating each candidate on a short training budget before full retraining of the best found design. We evaluate our framework on two image classification benchmarks, Digits and MNIST, achieving final validation accuracies of 99.44% and 98.78%, respectively, with first-principles execution time estimates on the Quandela Ascella photonic QPU projecting single-image inference at 67 ms (Digits) and 149 ms (MNIST). Our quantum contribution analysis further shows that the photonic layer extracts non-redundant features orthogonal to the classical pathway, providing a measurable accuracy advantage over classical-only baselines. Our results demonstrate that automated architecture search is both practical and impactful for hybrid photonic systems, opening the way for systematic design space exploration of quantum AI on photonic devices.

As a rapidly emerging interdisciplinary field that intrinsically integrates microwave and photonics, microwave photonics (MWP) provides disruptive solutions to overcome the fundamental bandwidth of conventional electronic systems. By exploiting the inherently ultra-wide bandwidth and low-loss characteristics of photonic technologies, MWP enables the generation, transmission, processing, and detection of microwave, millimeter-wave, and terahertz signals. Representative breakthroughs include fully photonic microwave radar systems, photonic analog-to-digital converters with bandwidth up to 320 GHz, and photonic wireless communication systems achieving data rate as high as 616 Gbit/s. Meanwhile, the rapid growth of artificial intelligence (AI) is reshaping scientific research, engineering, and daily life in unprecedented ways, such as AI for science/engineering and AI co-scientist/assistant. Correspondingly, AI is profoundly reshaping MWP in all aspects, ranging from signal generation, transmission to signal processing and detection. AI has revolutionized the design, simulation, fabrication, testing, deployment, and maintenance of MWP systems, delivering autonomous operation and exceptional efficiency beyond traditional systems. Motivated by these developments, this Review Paper provides the first comprehensive overview of AI-enabled MWP, systematically summarizing the state-of-the-art advances and presenting insights for both the academic community and the broader public.

Physical computing systems provide a promising route toward hardware-native machine learning, but their computational capabilities remain difficult to characterize in a principled, task-independent, and data-efficient way. We extend the Information Processing Capacity (IPC) framework to stationary physical computing systems and establish several fundamental results: individual capacities are bounded between zero and one, their sum over a complete basis is bounded by the number of readouts, and noise strictly reduces this bound. We address the finite-sample estimation of IPC and derive the asymptotic form of the systematic positive bias affecting naive estimators. Building on these results, we introduce data-efficient estimation methods based on Richardson extrapolation and Sobol quasi-random sampling. We validate the framework experimentally using a photonic computing system based on picosecond laser pulses propagating through a nonlinear optical fibre. By varying the laser power and fibre length, we observe systematic shifts of the IPC distribution toward higher-order nonlinear capacities induced by the Kerr effect. Finally, we demonstrate that the total IPC strongly correlates with performance on benchmark machine-learning tasks and provides a reliable estimate of the effective dimensionality of the system. These results establish IPC as a practical bridge between the intrinsic dynamics of physical computing systems and their machine-learning performance.

A fast simulation of the detector response is a vital task in high-energy physics (HEP). Traditional Monte-Carlo methods form the backbone of modern particle physics simulation software but are computationally expensive. We present a machine-learning-based approach to fast simulation of the Focusing Aerogel Ring Imaging Cherenkov (FARICH) detector response. Given a particle track and momentum, the goal is to generate realistic samples of photon hits on the detector matrix. We propose a conditional Generative Adversarial Network (cGAN) with a lightweight convolutional architecture that reproduces the projected detector response conditioned on particle parameters. We compare the cGAN against a linear statistical baseline using metrics applied to probability maps and to the reconstructed velocity distributions. The cGAN produces realistic samples and provides a significant speed-up over Monte-Carlo simulation.

Gesture recognition is a cornerstone of Human-Computer Interaction (HCI) for smart eyewear, enabling natural and device-free control in augmented reality environments. Traditional vision-based approaches face significant challenges regarding power consumption, computational latency, and user privacy. This paper proposes a lightweight, privacy-preserving gesture recognition system based on the fusion of low-resolution Time-of-Flight (ToF) and Infrared (IR) thermal sensors. We used an 8 times 8 multizone ToF sensor (VL53L8CH) and an 8 times 8 IR array (AMG8833) to capture complementary depth and thermal cues. A compact Convolutional Neural Network (CNN) with a specialized grouped-convolution architecture is designed to fuse these modalities efficiently on a microcontroller (MCU). Experimental results on a custom dataset of 7 static gestures, validated via k-fold cross-validation, demonstrate that the proposed fusion strategy significantly outperforms single-sensor baselines with an accuracy of 92.3% and a macro F1-score of 0.93. Finally, on-device benchmarks on STM32F4 and STM32H7 MCUs confirm the system's suitability for resource-constrained wearables, requiring only 6,343 parameters and achieving millisecond-level inference latency with a total system power of 50 mW.

Ghost imaging reconstructs spatial information from a single-pixel bucket detector by correlating structured illumination patterns with scalar intensity measurements. While deep learning approaches have achieved promising results on static scenes, two critical limitations remain unaddressed: existing architectures fail to exploit temporal coherence across frames, leaving dynamic ghost imaging largely unsolved, and they assume additive Gaussian noise models that do not reflect the true Poissonian statistics of real single-photon hardware. We present DynGhost (Dynamic Ghost Imaging Transformer), a transformer architecture that addresses both limitations through alternating spatial and temporal attention blocks. Our quantum-aware training framework, based on physically accurate detector simulations (SNSPDs, SPADs, SiPMs) and Anscombe variance-stabilizing normalization, resolves the distribution shift that causes classical models to fail under realistic hardware constraints. Experiments across multiple benchmarks demonstrate that DynGhost outperforms both traditional reconstruction methods and existing deep learning architectures, with particular gains in dynamic and photon-starved settings.

Optical readout in low-light imaging is fundamentally limited by measurement noise, including photon shot noise, detector noise, and quantization error. In this regime, downstream inference depends not only on the optical front end, but also on how noisy high-dimensional sensor measurements are represented before classification or decision-making. Here we show that eigentasks provide a measurement-adapted representation for optical sensor outputs by ordering readout features according to their resolvability under noise. Using experimental data from a lens-based optical imaging system and a reanalysis of published data from a single-photon-detection neural network, we find that eigentask representations frequently outperform standard baselines including principal component analysis and filtering-based compression. The advantage is most pronounced in photon-limited, few-shot, and higher-difficulty classification regimes. In few-shot MPEG-7 classification, for example, the advantage over other methods reaches about 10 percentage points as the number of classes increases. In these settings, eigentasks yield more informative low-dimensional features and improve sample-efficient downstream learning. These results identify measurement-adapted representation as a promising strategy for optical inference when photon budget, acquisition time, and task complexity are constrained.

Designing photonic integrated circuits requires accurate electromagnetic field simulations, which remain computationally expensive even for simple device geometries. We present PIC-Flow, a generative neural surrogate that predicts electromagnetic field distributions for photonic devices given their geometry and operating wavelength as an alternative to costly finite-difference time-domain (FDTD) simulations. Our approach combines three key ideas: (i) conditional flow matching as the generative framework, learning a velocity field that transports Gaussian noise to physically valid field solutions; (ii) a real-valued U-Net operating on split real and imaginary field channels; and (iii) physics-constrained training through a Helmholtz residual loss enforcing $\nabla^2 E_z + k_0^2 \varepsilon E_z = 0$. We introduce an interface-aware masking scheme for the Helmholtz residual that excludes dielectric boundary pixels where finite-difference stencil errors dominate, yielding a physically meaningful compliance metric. The data set consists of 22,500 ground-truth FDTD simulations split evenly between multimode interferometers, Y-branches, and directional couplers at $λ=1.55\,μ$m in an 80/10/10 split between training, validation, and test sets. We evaluate ablations on the network against the held out test devices and also show that the model generalizes to held out device classes such as S-bends, tapers, and cascaded Y-branches. Rather than a drop-in replacement for FDTD, this work establishes a foundation that, with broader data coverage, more compute, and further training optimization, could scale toward broadband, device-agnostic field prediction with dramatically improved runtime for rapid design-space exploration of complex photonic devices and circuits.

Read-only memory (ROM) provides deterministic access to predefined data mappings. Extending ROM concepts to the optical domain enables high-bandwidth, low-latency, and parallel memory access, but realizing compact and reconfigurable optical ROM remains challenging due to loss, wavelength control, and integration constraints. This work presents a high-speed, reconfigurable photonic ROM architecture implemented using integrated microring resonators (MRRs). The ROM encodes predefined input-output mappings directly in the spectral response of the photonic devices, enabling deterministic lookup-based operation without dynamic computation during readout. To improve scalability and reduce cumulative insertion loss, the architecture employs compact banked sub-arrays that are selectively addressed through an optical decoding mechanism. Reconfigurability is achieved using transistor-based optical selectors, allowing different ROM banks to be activated without physical light rerouting or interferometric structures. The proposed photonic ROM is designed and evaluated using device-level simulations based on the GlobalFoundries 45SPCLO silicon photonics platform. Simulation results demonstrate reliable operation at data rates up to 12.5 GHz, with stable light-to-current transfer characteristics obtained through integrated photodiode readout. The optical ROM can be used to implement nonlinear activation functions utilised in photonic accelerator architectures, including sigmoid, tanh, ReLU, and exponential mappings.

Accurate, unified models for event cameras (ECs) remain elusive, hampering calibration and algorithm design. We develop a foundational probabilistic model for EC event detection, grounded in photon statistics, that unifies the description of static scene noise events and step response curves (S-curves) within a single analytical framework. Three formulations of the probability distributions are derived, spanning all intensity regimes: exact Poisson, saddle-point, and Gaussian. The model reveals the underlying connection between these otherwise disparate EC behaviors and clarifies the interpretation of S-curves, which we show is more nuanced than selecting a fixed probability threshold. Based on this model, we propose Noise2Params, a method for determining camera-specific values of the log-contrast threshold $B$, the lux-to-photon conversion factor $α$, and the leakage term $θ$ (found to be intensity dependent), via error minimization against observed noise-event distributions. Noise2Params requires only recordings of static, uniform scenes, offering an experimentally accessible alternative to approaches that demand specialized dynamic light sources. We further support the validity the model by training convolutional neural networks (CNNs) on synthetic noise images generated from our distributions and evaluating their ability to reconstruct static scenes from experimental data. We further demonstrate the utility of our model by showing that CNNs incorporating synthetic data outperform those trained solely on experimental data. Our framework provides a quantitative foundation for EC calibration, noise-aware algorithm design, and applications in photon-limited regimes.

Using reinforcement learning, we optimize for practical hardware constraints, including limited FIR filter taps at the transmitter and receiver, mean photon number and finite DAC/ADC resolution. Under these realistic conditions, the proposed approach achieves significant performance improvements.

Iterative ptychographic reconstruction algorithms are widely used for coherent diffractive imaging but can exhibit slow convergence under realistic experimental conditions. We propose a machine learning-augmented approach that accelerates iterative ptychographic reconstruction by introducing a learned fast-forward operator applied during reconstruction. Following an initial warm-up using standard iterations, the fast-forward operator advances the reconstruction toward a more converged state, after which conventional iterative updates are resumed. This strategy preserves the physical consistency and flexibility of established ptychographic solvers while reducing the number of iterations required for convergence. The model is trained on diverse ptychographic datasets and evaluated on experimental data acquired in a different year, demonstrating robustness and temporal generalization. Compared with conventional iterative solvers, the machine learning-augmented method achieves comparable reconstruction quality while converging faster in terms of Poisson negative log-likelihood, yielding over a two-fold reduction in wall-clock time. The approach has been integrated into an existing reconstruction pipeline and deployed in production at a synchrotron beamline, demonstrating practicality for real-time experimental operation.

3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage, but prior implementations have been limited to unimodal sensing and rigid materials. To improve the practical usability of 3D-printed artificial skins, we present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration, soft compliant coverings for impact absorption and pressure sensing, and a streamlined electrical interface between printed conductive traces and external electronics. We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering by deploying six artificial skin units with 40 sensing elements over an FR3 robot arm.

Particle accelerator beamline optimization is a high-dimensional control problem traditionally requiring significant expert intervention. We present RLABC (Reinforcement Learning for Accelerator Beamline Control), an open-source Python framework that automatically transforms standard Elegant beamline configurations into reinforcement learning environments. RLABC integrates with the widely-used Elegant beam dynamics simulation code via SDDS-based interfaces, enabling researchers to apply modern RL algorithms to beamline optimization with minimal RL-specific development. The main contribution is a general methodology for formulating beamline tuning as a Markov decision process: RLABC automatically preprocesses lattice files to insert diagnostic watch points before each tunable element, constructs a 57-dimensional state representation from beam statistics, covariance information, and aperture constraints, and provides a configurable reward function for transmission optimization. The framework supports multiple RL algorithms through Stable-Baselines3 compatibility and implements stage learning strategies for improved training efficiency. Validation on a test beamline derived from the VEPP-5 injection complex (37 control parameters across 11 quadrupoles and 4 dipoles) demonstrates that the framework successfully enables RL-based optimization, with a Deep Deterministic Policy Gradient agent achieving 70.3% particle transmission -- performance matching established methods such as differential evolution. The framework's stage learning capability allows decomposition of complex optimization problems into manageable subproblems, improving training efficiency. The complete framework, including configuration files and example notebooks, is available as open-source software to facilitate adoption and further research.

We present a Mixture-of-Experts-based foundation model applied to the GlueX DIRC detector at Jefferson Lab, demonstrating its utility as a unified framework for fast simulation, particle identification, and hit-level noise filtering of Cherenkov photons. By leveraging a single shared transformer backbone across all tasks, the approach eliminates the fragmentation of task-specific pipelines while maintaining competitive-and in several cases superior-performance relative to established methods. The model operates directly on low-level detector inputs, performing hit-by-hit autoregressive generation over split spatial and temporal vocabularies with continuous kinematic conditioning, and supports class-conditional generation of pions and kaons through its Mixture-of-Experts architecture. We benchmark against the standard geometrical reconstruction and prior deep learning methods across the full kinematic phase space of the GlueX DIRC, demonstrating that the foundation model framework transfers effectively to this detector without architectural modification. This work positions the foundation model as a practical and scalable alternative to the suite of task-specific models currently proposed for GlueX DIRC analysis.

Portable CT scanners may support earlier stroke assessment, but reduced photon counts introduce noise that affects image quality and may alter automated classification. We compared direct classification of simulated low-dose slices with residual U-Net denoising followed by the same fixed classifier. Poisson noise was generated at photon-count scaling factors of 1, 5, 10, 20, and 40 using three deterministic seeds. The held-out set contained 809 slices, including 242 positive and 567 negative slices. Direct classification reached its highest mean ROC-AUC at a scaling factor of 20 (0.937 +/- 0.002). Denoising followed by classification reached 0.842 +/- 0.005 at a scaling factor of 1 and declined to 0.655 +/- 0.002 at a scaling factor of 40. Meanwhile, reconstruction quality rose steadily from 21.92 to 40.91 dB PSNR and from 0.761 to 0.987 SSIM. Both pathways had poor sensitivity at a fixed 0.5 cutoff because their classification scores were concentrated near zero. Patient-level analysis was limited by the test-set composition: all 10 patients were positive under the mask-derived patient label, preventing estimation of patient-level AUC and specificity. Overall, higher reconstruction fidelity did not translate into better discrimination by the fixed classifier except at the lowest photon-count setting.

Astronomical imaging remains noise-limited under practical observing conditions. Standard calibration pipelines remove structured artifacts but largely leave stochastic noise unresolved. Although learning-based denoising has shown strong potential, progress is constrained by scarce paired training data and the requirement for physically interpretable models in scientific workflows. We propose a physics-based noise synthesis framework tailored to CCD noise formation in the telescope. The pipeline models photon shot noise, photo-response non-uniformity, dark-current noise, readout effects, and localized outliers arising from cosmic-ray hits and hot pixels. To obtain low-noise inputs for synthesis, we stack multiple unregistered exposures to produce high-SNR bases. Realistic noisy counterparts synthesized from these bases using our noise model enable the construction of abundant paired datasets for supervised learning. Extensive experiments on our real-world multi-band dataset curated from two ground-based telescopes demonstrate the effectiveness of our framework in both photometric and scientific accuracy.

Single-photon avalanche diodes (SPADs) record light as a discrete stream of individual detections. The signal is stochastic. Its statistical structure depends on the sensor's operation mode: binary detection in fixed bins, timestamped detection in fixed bins, or free-running timestamped detection. We derive the likelihood score function for each of these three passive modes. From this single object, stem both fundamental limits of recovery (Cramer-Rao bounds) and practical recovery algorithms based on diffusion posterior sampling. The paper further generalizes fundamental limits to Bayesian Cramer-Rao lower bounds. This generalization makes use of a learned approximation of the score function of signal priors. In prior art, analyses and diffusion-based reconstruction for SPAD data have treated individual modes in isolation. Our unified treatment shows a qualitative high-flux gap between modes: binary counts saturate exponentially, while timestamped modes degrade only linearly. We further extend diffusion posterior sampling, previously restricted to binary SPAD data, to a full timestamped case using the suitable score function. We demonstrate experimentally that matching the score to the operation mode is beneficial for high-fidelity reconstruction. By tying the recovery bounds and diffusion to the score function, this work aims to establish a common foundation for both asking what is recoverable in single-photon sensing, and building methods that approach the bound.