Manipulation

Imitation learning has enabled highly-dexterous robotic manipulation from RGB observations. Policies trained with these methods, however, typically condition robot actions on only a short history of observations. These policies cannot solve tasks that require memory and can get stuck repeatedly executing the same failing motions. In this work, we first benchmark policy performance as context length is incrementally increased from short to long, across a spectrum of tasks with varying local stability and memory requirements, and in multiple data regimes. To our knowledge, this is the first study to investigate context length for Diffusion Policies at this level of detail. Our results challenge prior claims: naively scaling context length is not as brittle as advertised in literature. With an appropriate conditioning method and denoising backbone (UNet+Cross-Attention), single-task policies achieve high success rates on many tasks in the usual data regime even with naive scaling. Next, we propose a training algorithm to jointly train policies at multiple context lengths, further reducing the sample complexity of long-context learning. Finally, we apply our findings to re-evaluate some previously proposed solutions to long-context imitation learning.

Achieving autonomous robotic dexterous manipulation requires precise, human-like action sequences at scale. As a scalable supplement to costly teleoperation data, extracting trajectories with both visual fidelity and physical plausibility from monocular videos represents a promising frontier in embodied AI. To this end, we introduce V2P-Manip, an efficient framework designed to learn dexterous manipulation policies directly from human demonstration videos. We establish an efficient, integrated pipeline encompassing 3D asset acquisition, trajectory estimation, and dexterous policy learning. To bridge the gap between visual perception and physical constraints, we introduce a two-stage refinement process to enforce spatial alignment and physical consistency. Evaluations on the TACO and OakInk benchmarks demonstrate that our approach significantly outperforms previous methods in pose accuracy, adaptability to unstructured environments, and training efficiency. Ultimately, experimental results confirm an average success rate of over 75% across multiple synthetic manipulation tasks and validate the adaptability of the extracted manipulation priors across diverse dexterous hand embodiments.

The integration of augmented reality (AR) and EEG-based brain-computer interfaces (BCIs) offers a promising path for enabling intuitive control of robots for assistive purposes. However, existing AR brain-robot interface (BRI) systems are often constrained to task-specific structures, limiting their utility in real-world environments. We present an AR BRI designed for generalist robot arm manipulation that combines gaze-based object selection with motor imagery action control. Our system uses eye-tracking for intuitive object targeting and context-aware visual overlays ("Place" and "Use") to guide the user through tasks within a shared autonomy framework. We evaluated the interface through a feasibility study with 18 healthy participants performing three multi-step activities of daily living: drinking, using a drawer, and operating an oven. Our results demonstrate that this interaction paradigm enables effective sequential task execution and high user engagement, achieving a "Good" usability rating (SUS > 70). These findings support the feasibility of the proposed interaction paradigm for complex BCI-driven robotic assistance, and motivate future evaluation with the intended target population. Project website: https://ar-bri-manip.github.io/.

Human hand-object demonstrations provide dense reference motions for training dexterous manipulation reinforcement learning (RL) policies through reference tracking. However, to use such demonstrations for RL policy learning, retargeting must preserve hand pose and task-relevant hand-object contact structure. Otherwise, contact and feasibility artifacts can degrade downstream RL policy performance. We introduce TopoRetarget, an interaction-preserving retargeting framework that uses a single set of parameters across diverse retargeting conditions while maintaining task-relevant hand-object interaction and adapting human demonstrations to dexterous robot hands. The method constructs a sparse interaction graph over hand and object keypoints and optimizes distance-weighted Laplacian deformation with directional consistency, kinematic constraints, and penetration handling. Evaluations show that the generated references improve both interaction fidelity and policy learning: TopoRetarget achieves the best contact precision and alignment over all baselines on the ContactPose Dataset, improves Pen-Spin training success by 40.6 percentage points over the existing baseline methods, and enables zero-shot transfer to Wuji Hand hardware on cube reorientation and pen spinning.

Embodied Continual Learning (ECL) aims to enable robots to continually acquire new manipulation tasks while retaining previously learned behaviors under closed-loop control. Compared with conventional continual learning, ECL suffers from more severe catastrophic forgetting. Feature drift accumulated under closed-loop control progressively propagates through sequential decision-making, leading to degradation of previously learned behaviors. A key challenge in ECL lies in structured skill reuse across continually evolving tasks, since existing methods primarily focus on skill learning without explicitly organizing them for coherent task execution. To address this issue, we propose SCE, a Skill-Compositional Experts framework for ECL. SCE builds a skill base via Compositional Skill Grounding (CSG), which decomposes task demonstrations into reusable skills. Based on this, Dual Execution-and-Transition Experts (DETE) enable new task learning through skill composition, where one branch ensures skill execution and the other supports transitions between skills for coherent behavior. Experiments on LIBERO benchmarks and real-world manipulation tasks demonstrate that SCE consistently improves retention and overall task performance. Further feature drift analyses and ablation studies verify the effectiveness of our method. Project website: https://eqcy.github.io/sce/.

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

Inference-time steering adapts pre-trained generative robot policies during deployment by verifying candidate actions before execution. While prior methods typically perform this verification only with visual observations, vision alone is often insufficient for contact-rich manipulation, where success depends on both global task progress and subtle local interactions such as contact force. We introduce ViTaL, a visuo-tactile inference-time steering framework that formulates multimodal guidance as a bi-level optimization problem. At the high level, visual sampling-and-verification performs long-horizon mode selection, deciding what behavior the robot should execute. At the low level, tactile-guided diffusion editing refines the selected action sequence over a shorter horizon to satisfy local contact requirements. To support outcome-based steering, ViTaL learns a visuo-tactile latent world model and employs semantically aligned visual and tactile verifiers, including a novel text-conditioned tactile reward that scores predicted tactile futures directly in latent space. Across three real-world contact-rich manipulation tasks, ViTaL improves overall success by 51% over the base policy, outperforms unimodal steering by at least 33%, and exceeds naive multimodal fusion by at least 20%. Website: https://yilin-wu98.github.io/vital_website.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

Recent visual imitation learning systems have widely adopted multi-camera setups with wrist-mounted cameras as the de facto standard. However, manipulation from a single global view remains challenging, as the policy should capture fine-grained interaction details and identify task-relevant regions without local wrist views. To address this challenge, we present Spatially Conditioned Diffusion Policy (SCDP), a diffusion-based visuomotor policy that achieves precise and robust manipulation in a single-camera setting. Our key idea is that end-effector trajectories can serve as visual attention anchors that reflect task-relevant regions. Building on this idea, SCDP consists of two key components: (i) a visual encoder that produces multi-scale feature maps to capture both broader context and fine-grained visual features, and (ii) a spatial conditioning module that samples point-wise features along intermediate end-effector trajectories in the diffusion loop. Extensive simulation experiments show that SCDP consistently outperforms strong single-view baselines and achieves performance comparable to multi-camera baselines. Real-world experiments further demonstrate precise manipulation and robustness to visual distractors, highlighting the potential of single-camera imitation learning.

Object placement is a fundamental component of aerial manipulation tasks, yet existing systems typically require the desired placement position to be specified explicitly in metric coordinates. Such interfaces are not intuitive and require users to reason about coordinate frames and scene geometry, making them difficult to use in practical deployments. In contrast, humans often communicate spatial goals through a combination of language and pointing gestures. Inspired by this observation, we present AERMANI-PLACE, a framework for language-guided object placement with aerial manipulators. Given a scene image and a natural language instruction, an image editing model generates a modified version of the scene containing a visual marker that indicates where the object should be placed. This marker is then grounded into the physical environment using depth observations to recover a metric place point, after which a placement trajectory is generated and executed by the aerial manipulator. We evaluate the proposed approach on a test set of 100 language-guided placement tasks and demonstrate successful execution on a real aerial manipulation platform. Experimental results show that the proposed method reliably infers placement locations from language instructions with an average success rate of 87% on the test-set and transfers effectively to real-world aerial manipulation with an average success rate of 72%. Video: https://youtu.be/SgwwgLBsv0g

This paper investigates the fragility of post-hoc explanation methods in audio deepfake detection. While previous work on explanation manipulation focused on images using standard $L_p$ metrics, we introduce a psychoacoustic framework that optimizes inaudible perturbations to decouple model attributions from final classifications. We evaluate this vulnerability across state-of-the-art architectures under strict prediction-preserving constraints. By evaluating the manipulation cost through domain-specific perceptual audio quality metrics alongside explanation alignment criteria, our framework demonstrates that an adversary can systematically distort automated explanation heatmaps while preserving the predicted deepfake label. Full code available at: https://github.com/cncPomper/Audio-XAI

Vision-language-action (VLA) models are powerful action generators for robot manipulation, but they are typically executed with fixed inference and replanning schedules. This rigidity ignores the uneven difficulty of robot control: contact-rich or uncertain states may need more computation and fresher feedback, while easier states can often be handled with fewer inference steps and longer open-loop execution. We propose Elastic Queries Reinforcement Learning (EQRL), a framework that makes each VLA policy query elastic. A lightweight latent-schedule adaptor jointly selects the latent input, denoising budget, and action chunk length, without fine-tuning the underlying VLA model. To make scheduling difficulty-aware, EQRL trains a critic over the joint latent-schedule action and derives a state difficulty signal from critic ensemble disagreement. This signal guides compute toward difficult states, while a learned residual allows task-driven correction. We formulate variable chunk execution as query-level macro-action RL with chunk-dependent discounting and an amortized number-of-function-evaluations (NFE) budget. Across simulation and real-robot manipulation, EQRL reduces amortized inference cost while preserving or improving task success.

Diffusion-based Vision-Language-Action (VLA) policies have demonstrated strong capability in modeling expressive and multimodal action distributions. However, their reliance on iterative sampling introduces substantial inference latency, which limits their applicability to reactive closed-loop robot manipulation. To address this limitation, we propose \texttt{ReactVLA}, a lightweight and low-latency VLA framework for real-time robotic manipulation. \texttt{ReactVLA} combines two complementary designs: (1) an improved Mean Flow (iMF) action generator that reduces expensive multi-step diffusion sampling to one-to-few-step action generation, and (2) Attention Residuals (AttnRes), a dynamic depth-wise feature routing mechanism that replaces uniform residual accumulation to better preserve task-relevant multimodal representations. We evaluate \texttt{ReactVLA} on large-scale simulation benchmarks, including LIBERO and RoboIMI, as well as real-world robotic manipulation tasks. Experimental results show that \texttt{ReactVLA} consistently outperforms similarly sized VLA baselines, including SmolVLA and $π_0$. On challenging precision manipulation tasks, \texttt{ReactVLA} achieves up to a 1.65$\times$ improvement in task performance while providing more than a 4$\times$ increase in inference speed compared with leading VLA models. Finally, it reduces real-world policy latency to below 38.6 ms, enabling fast reactive control on physical robot platforms. Please check out our project website at: https://game-loader.github.io/ReactVLA/.

For robots to work safely in household environments, they need to be compliant and react to torque and force feedback during contact. However, the majority of existing data collection pipelines still lack the ability to capture force and torque data for learning active compliant policies. In this paper, we present Universal Manipulation Exoskeleton (UME), an upper-limb exoskeleton that provides real-time haptic torque feedback while recording whole-arm configurations and joint torque signals for teleoperation. With transparent torque feedback, human operators can even unsheathe kinematically constrained objects while blindfolded. UME is low-cost, lightweight, and portable. Equipped with an embedded IMU, it enables teleoperation for mobile manipulation. With our proposed universal retargeting algorithm, UME can teleoperate a range of robots, including the 7DoF OpenArm, 7DoF Franka, and 6DoF X-ARM. We demonstrate that this combination of capabilities enables learning bimanual, whole-body, and active compliant policies that operate effectively in highly constrained spaces. The learned robust autonomous policies achieve high success rates across a variety of tasks, including long-horizon mobile manipulation, force-mediated box flipping, visually occluded box pushing, and space-constrained tabletop manipulation. Videos, code, and additional information can be found at https://ume-exo.github.io.

We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

World action models (WAMs) have recently shown promise in jointly modeling future observations and executable robot actions. However, most existing WAMs still operate in 2D video or latent spaces, where visually plausible rollouts miss the 3D spatial constraints and occluded contact geometry required for precise manipulation. While geometric foundation models offer strong priors for recovering dense 3D structure and motion from visual observations, forcing WAMs to predict the dense 4D representation introduces costly geometric decoding and slows down causal action generation. To address the trade-off, we present WAM4D, a fast 4D world action model that uses lightweight spatial register tokens as training-time future-depth readouts to transfer pretrained geometric priors into a causal video-action transformer, then removes the register branch for lightweight action inference. To prevent non-causal shortcuts, we further design causal mixture attention for the Mixture-of-Transformers (MoT) WAM backbone, defining modality-specific visibility among video, action, and geometry tokens. Comprehensive experiments on RoboTwin 2.0 and challenging real-world manipulation tasks show that WAM4D improves spatial consistency and achieves competitive action prediction while maintaining efficient inference.

Articulated tool manipulation remains a major challenge in dexterous robotics due to the need to coordinate internal degrees of freedom and contact-rich interactions. While prior work has largely focused on rigid objects, articulated tool use remains underexplored because of its physical complexity and the difficulty of learning functional grasping and manipulation policies. We present Mana (Manipulation Animator), a general sim-to-real framework that reinterprets dexterous manipulation as an animation problem. Inspired by computer animation, Mana employs a coarse-to-fine pipeline that transforms procedurally-generated grasp keyframes into manipulation trajectories through motion planning and reinforcement learning. The data generation process is largely automatic, requiring only a few mouse clicks to specify functional affordances (<1 minute per tool). Across four articulated tools spanning different scales and joint types, Mana achieves zero-shot sim-to-real transfer for both grasping and in-hand manipulation, demonstrating a scalable approach to dexterous articulated tool use.

The potential impacts of world models (WMs, i.e., learned simulators) on robotics are far-reaching -- policy evaluation, policy improvement, and test-time planning -- all with limited real-world interaction. To unlock these downstream capabilities, a WM needs to jointly satisfy three desiderata: $\textit{(i)}$ fidelity (i.e., producing simulated trajectories that correlate with reality), $\textit{(ii)}$ consistency (i.e., producing simulated trajectories that are coherent over long horizons), and $\textit{(iii)}$ efficiency (i.e., producing simulated trajectories quickly). We propose WEAVER (World Estimation Across Views for Embodied Reasoning): a WM architecture that simultaneously achieves all three desiderata, providing state-of-the-art results on robotic manipulation tasks. WEAVER is a multi-view WM trained to predict future latents and reward values via a flow-matching loss. We distill the key design decisions across model architecture, memory, and prediction objectives required to unlock the kinds of long-horizon dynamic manipulation tasks that have confounded prior world modeling approaches. We apply WEAVER in robotic hardware, demonstrating its effectiveness at policy evaluation ($ρ$=0.870 correlation with real-world success rate), policy improvement (real-world success rate improvement of $38\%$ on top of the $π_{0.5}$ robot foundation model), and test-time planning (real-world success rate improvement of $14\%$ with a $5-10\times$ speedup over prior WMs). WEAVER also demonstrates better performance than prior WMs when evaluated on out-of-distribution scenarios. Code, models, and videos at: https://arnavkj1995.github.io/WEAVER/ .

Dexterous robotic hands are usually formulated as high dimensional active control systems governed by degrees of freedom, actuation, and algorithms. Human hand dexterity, however, is partly encoded in the physical architecture of bones, ligaments, tendons, aponeuroses, and intrinsic muscles. This work describes that contribution as two linked forms of structural intelligence: structural prior generation, in which wrist to finger tenodesis, FDS/FDP routing, and the dorsal extensor hood transform low dimensional posture inputs into default grasp configurations and PIP to DIP coordination; and muscle mediated modulation, in which extrinsic muscles, lumbricals, and interossei regulate MCP posture, distal stability, fingertip force paths, and contact states around that default state. Based on this framework, MCR-Bionic Hand is developed as a 1:1 musculoskeletal biomimetic hand integrating a two row eight bone wrist, cross wrist tendons, anatomical flexor routing, volar plate and collateral ligament constraints, the dorsal extensor hood, and intrinsic muscle pathways within one body. Functional demonstrations and geometric mechanical models show that wrist posture induces multi joint pre shaping, the extensor hood maps PIP posture to a coupled DIP response, and intrinsic plus pathways modulate distal stability and fingertip action direction after grasp formation. Contact rich tasks, including coin rotation, pen transfer, dorsal coin flipping, and cube manipulation, show that MCR-Bionic links low dimensional state generation with fine post contact modulation. These results suggest that anatomical biomimetics is valuable not for visual similarity, but for identifying human hand structures that perform part of control.

Human communication is inherently multimodal, where language is often accompanied by non-verbal cues such as gestures to convey intentions. However, current Vision-Language-Action (VLA) models treat robotic manipulation as a pure text-driven task, overlooking the important role of gestures in Human-Robot Interaction (HRI). This often leads to inaccurate intent grounding and unreliable manipulation when language instructions are ambiguous or underspecified. To address this challenge, we propose GIVE (Gesture Intent via Visual-Semantic Enhancement), an effective approach that enhances pre-trained VLA models with human gesture understanding without architectural modifications. Specifically, GIVE incorporates gesture information through two complementary pathways: a visual pathway that overlays hand skeletons and fingertip rays onto robot observations for explicit object grounding, and a semantic pathway that generates high-level descriptions of human gestures and task instructions for robust intent grounding. By jointly leveraging visual and semantic guidance, GIVE enables VLA policies to better associate gestures with manipulation behaviors and adapt to dynamic interaction intents. In real-world HRI experiments, GIVE substantially outperforms the baseline, improving target object recognition accuracy by 40% and overall task success rate by 80%, while demonstrating strong robustness and generalization to unseen spatial layouts and diverse participants.

Despite the success of vision-based generalist robotic policies, existing tactile-based policies remain tied to fixed embodiments and sensor setups. This is because tactile signals are highly heterogeneous across hardware, making cross-sensor generalization difficult. We present FTP-1,the first generalist foundation tactile policy pretrained to acquire transferable tactile manipulation abilities across diverse sensors and embodiments. FTP-1 supports varied tactile inputs, including image-, array-, and state-based signals, by using heterogeneous encoders to project them into unified morphology-aware latent tokens that are jointly modeled by a shared tactile Transformer expert. Pretrained on around 3,000 hours of tactile manipulation data aggregated from 26 data sources, spanning human and robot demonstrations across 21 sensors, FTP-1 learns tactile skills that transfer beyond the sensors seen during pretraining. Across downstream finetuning experiments spanning 5 hardware configurations, FTP-1 improves contact-rich manipulation on seen sensor setups by +17.2% and, surprisingly, transfers to two previously unseen tactile-sensor setups, achieving a +31% gain in success rate. FTP-1 establishes the first unified foundation baseline for tactile manipulation, providing future tactile policies with a shared model-level starting point. Pretrained models, datasets, training code and more visualization at https://ftp1-policy.github.io.

Vision-language models (VLMs) are increasingly explored as visual critics, reward generators, and failure detectors in robotic manipulation. These roles implicitly require models to judge not only final task success, but also how a manipulation execution is physically and temporally progressing. However, existing evaluations fail to test whether VLMs possess fine-grained process understanding. To address this gap, we present RoboProcessBench, a benchmark for process-aware understanding in vision-language robotic manipulation. RoboProcessBench decomposes such capability into two complementary dimensions, \emph{static monitoring} and \emph{dynamic reasoning}, instantiated as 12 diagnostic question families covering phase, contact, motion, coordination, primitive-local progress, temporal order, outcome, and primitive-level transitions. Built from physically grounded execution traces, the curated benchmark corpus ProcessData contains \textasciitilde 58k question-answer pairs across 260 manipulation tasks, which is further split into ProcessData-SFT and ProcessData-Eval for post-training and evaluation purposes. Extensive evaluation of various VLMs on ProcessData-Eval reveals broad limitations across 12 diagnostic task families, suggesting current models still lack robust process-aware understanding of manipulation executions. But with ProcessData-SFT, the post-trained \textit{Qwen2.5-VL-7B} and \textit{InternVL-3-8B} exhibit consistent gains on local state, motion, progress, and primitive-aware cues. These results demonstrate that RoboProcessBench serves as both an evaluation benchmark and a learnable supervision source for developing VLMs capable of monitoring and evaluating robotic manipulation processes. Project webpage: \href{https://processbench-2026.github.io/RoboProcessBench-Web/}{https://processbench-2026.github.io}.

Wet-lab robots can improve the reproducibility, throughput, and safety of biomedical experiments, but scaling their learning requires customizable simulators for safe and reproducible task generation, open editable laboratory assets, and efficient pipelines that turn limited demonstrations into usable training data. We present Pipette, an embodied simulation platform, benchmark, and data-efficient augmentation framework for wet-lab robot learning. Pipette provides over 100 open-source and re-editable wet-lab assets through an extensible asset-building pipeline with built-in Tencent Hunyuan support for text- and image-conditioned 3D asset generation, and supports three robotic-arm embodiments through a unified simulation interface for task construction, data collection, augmentation, and evaluation. A key component of Pipette is its simulation-based data augmentation pipeline, which replays human demonstrations in simulation, applies lighting, camera, speed, and action perturbations, and filters generated episodes with automatic task success checks, rapidly expanding usable training data from limited manual demonstrations. We further introduce a 12-task wet-lab embodied benchmark covering sample handling, culture-ware manipulation, device operation, and precision placement. With only 30 demonstrations per task, ACT achieves 60.3% average success rate, while simulation augmentation improves SmolVLA from 40.4% to 71.8% and pi0 from 37.3% to 44.1%, validating the effectiveness of Pipette for data-efficient VLA training and evaluation. Pipette also supports natural-language-driven scene construction and task registration, lowering the barrier for non-expert users to define new wet-lab robotic tasks

For robotics to be effectively integrated into household or industrial environments, machines must adapt to natural-language prompts in real time. Although Vision-Language Models (VLMs) have enabled zero-shot generalization in robot task and motion planning (TAMP), current state-of-the-art approaches often remain computationally "heavyweight" or require extensive training on thousands of demonstrations. We present GRASP (Grounded Reasoning and Symbolic Planning), a framework designed as a step toward open-vocabulary tabletop manipulation. Our approach leverages a pretrained VLM to translate natural-language queries into neuro-symbolic goal states, grounded in the physical world via a bounding-box detection pipeline. Unlike methods that rely on fixed color lists or hard-coded coordinates, GRASP enables robots to interpret abstract spatial concepts such as "top shelf" and execute tasks without additional fine-tuning. We achieve 73.3% overall success across 90 real-robot trials at three difficulty levels, requiring no task-specific training.

Explicit 3D representations are attractive for manipulation because they expose object shape, workspace geometry, and robot-object relations in metric coordinates. However, sparse 3D encoders are often learned through downstream task objectives, tying the representation to a particular data distribution, policy architecture, and action parameterization. We introduce Sparse2Act, an observation-action alignment framework for pretraining sparse point-cloud encoders. The key idea is to use task-space end-effector actions as geometric supervision: masked sparse 3D tokens are trained to organize scene features around the workspace motion paired with the observation. After pretraining, only the encoder initialization is reused by downstream policies, allowing them to retain their own architectures and action spaces, including joint-space commands. On the LIBERO-10 benchmark, our method achieves 86.9% average success after 500 fine-tuning steps. The same pretrained encoder supports LIBERO-to-Meta-World cross-domain transfer, achieving 73.4% average success on the Meta-World-5 benchmark. Ablations on the objective and decoder capacity show that the gains come from the masked action-alignment signal and remain useful across downstream action decoders. In real-world experiments, simulation pretraining followed by limited real-data fine-tuning achieves an average success rate of 72.5% across four tasks, demonstrating effective sim-to-real transfer. These results suggest that robot actions can provide compact geometric supervision for reusable sparse 3D representations.

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

Vision-Language-Action (VLA) models have demonstrated remarkable zero-shot generalization in robotic manipulation, yet the vast majority of pre-trained pipelines remain strictly confined to low-DoF parallel grippers. Adapting these rich semantic priors to high-DoF dexterous hands introduces a severe morphology gap, direct end-to-end joint fine-tuning inherently causes catastrophic forgetting of spatial reasoning and acute action manifold collapse due to data scarcity. In this paper, we present InDex, a novel, data-efficient adaptation framework rooted in cross-morphology semantic inheritance. Rather than discarding the pre-trained 1-DoF parallel grasp output, we repurpose it as a continuous, macroscopic virtual grasp intent proxy to sequentialize the control topology. We implement a two-stage decoupled learning architecture: the first stage parameter-efficiently aligns the VLA backbone to predict continuous arm trajectories and the scalar grasp intent; the second stage freezes this spatial backbone and leverages an intent-conditioned denoising diffusion head to decode fine-grained joint articulations for multi-fingered end-effectors. Extensive simulation benchmarks across a suite of multi-stage, contact-rich dexterous manipulation tasks demonstrate that InDex effectively masters intricate skills with minimal demonstration data, substantially outperforming monolithic baselines while preserving the robust spatial generalizability of the original VLA prior.

We present AEM, an Action-Effect Memory pretraining framework for robot manipulation that learns compact temporal representations from vision-action history. Unlike prior robot representation pretraining methods that mainly focus on single-frame visual encoding, AEM targets the temporal nature of manipulation, where the current observation alone is often insufficient under partial observability. AEM models manipulation as an action-driven interaction process by interleaving visual and action features and applying masked modeling to recover missing content from incomplete histories, thereby learning action-conditioned state evolution. The Mamba-encoded output of the final vision token is used as a compact history representation, serving as the global context for decoding and downstream control. This design preserves a single-vector temporal bottleneck while keeping inference efficient. We evaluate AEM with Diffusion Policy and Flow Policy. AEM consistently improves manipulation performance in both simulation and real-world settings, outperforming baselines across clean scenes, cluttered and random scenes, and non-Markovian tasks. Ablation studies further show that history-aware pretraining surpasses single-frame pretraining and direct frame stacking, while reducing inference latency and computational cost.

Vision-language-action (VLA) models predict chunks of future actions from the current observation, an assumption that fails under partial observability, where decisions depend on information no longer visible. Existing memory-augmented VLAs simultaneously introduce recurrence, retrieval, compression modules, auxiliary objectives, hierarchical memory, or task-specific architectural changes, so the contribution of recurrence itself remains entangled with surrounding machinery. We present a controlled isolation study of recurrence in a strong pretrained VLA backbone. Our formulation augments the transformer with a small set of learnable memory tokens carried across timesteps and updated through self-attention, trained end to end with truncated backpropagation through time, with no auxiliary losses and no architectural changes. We instantiate this as $μ$VLA, a family of OpenVLA-OFT variants parameterized by memory width m, TBPTT length K, and the memory update rule (cross-step gradients or a detached EMA), so that recurrence is the only varying factor. On MIKASA-Robo, $μ$VLA improves average success rate on five training tasks from 0.42 to 0.84 at the strongest setting and reaches 0.23 on held-out tasks with the same memory structure versus 0.07 for the memoryless baseline. On tasks requiring different memory structure, performance remains near baseline. On LIBERO, the strongest recurrent variant achieves 96.2% average success, indicating no regression under full observability. We interpret these results as a calibration of the capability envelope of minimal in-backbone recurrence, identifying the regime in which it is sufficient and the regime where additional memory structure is required. Demos and videos can be found in https://avanturist322.github.io/mu-vla/.

Generalizable robot manipulation requires not only task-level reasoning over unseen scenes, but also reliable grounding of visual plans into embodiment-specific execution. To bridge this gap, we propose VICX (Video generation and In-Context eXecution), a decoupled closed-loop manipulation framework. In VICX, a frozen video generation model produces vision-language-conditioned high-level visual plans, while a Video-to-Trajectory In-Context Operator Network (V2T-ICON) serves as the task-agnostic interface that grounds these plans into executable robot-state trajectories. To improve execution generalization, V2T-ICON operates on segmentation-extracted arm-only frame observations and uses retrieved image-state pairs as in-context prompts, allowing a robust and generalizable visual-to-state mapping at inference time without parameter updates. Experiments on Meta-World show that VICX supports cross-task generalization, closed-loop self-correction, and cross-embodiment transfer, demonstrating dual generalization across both task semantics and robot execution. The project webpage can be found here: https://scaling-group.github.io/vicx/.

Multi-objective reinforcement learning for humanoid robots must coordinate locomotion and manipulation within a single policy. A natural design choice is whether to use a single (unified) critic that estimates the combined value of all objectives, or separate (dual) critics with disjoint reward signals. We present a controlled comparison on the Unitree G1 humanoid (23 active DoF) in NVIDIA Isaac Lab, training loco-manipulation policies through a sequential curriculum spanning 13 levels from stationary reaching to walking with variable-orientation targets. In standardized evaluation, dual-critic policies reach targets 3.5$\times$ faster (6.5 vs. 22.6 simulation steps), achieve 2$\times$ higher throughput (14.3 vs. 7.0 validated reaches per 1,000 steps), and attain higher validated reach rates (65.2% vs. 53.8%) compared to the unified-critic policy. Notably, additional anti-gaming reward mechanisms provide no further improvement beyond the architectural change alone (60.9% vs. 65.2%). These results have direct implications for the emerging paradigm of RL fine-tuning of imitation-learned policies: when refining a pre-trained manipulation policy with RL, a unified critic risks suppressing the learned behavior through competing locomotion gradients. These findings demonstrate that critic architecture is a primary - and often overlooked - design choice in multi-objective humanoid RL, with greater impact than reward engineering on reaching efficiency.

The handling of flexible materials is a difficult task to fully automate due to the challenges caused by the deformability of these types of objects. Meanwhile, a fully manual process can be ergonomically challenging, tedious and inefficient. Thus, human-robot collaboration (HRC) and cooperative manipulation (co-manipulation) have received increasing interest in this field as they enable human involvement when needed while also improving productivity. To enable efficient co-manipulation and interaction between the human operator and the robot, different modalities and control methods are required. In this paper, we present and examine different control methods for co-manipulation of carbon fiber plies, evaluating the pros and cons of each method in a controlled setting. We propose that a multimodal combination of speech commands, wrist-tracking through vision, and force with compliant control would provide the best solution for complete and intuitive control of the task.

Blind grasping with a dexterous hand is a crucial manipulation capability. Nevertheless, learning such tactile-only policies for real robots remains challenging due to the tactile sim-to-real gap and the limited expressiveness of sparse tactile signals. To bridge this gap, we propose a framework for tactile-only blind grasping that is deployable on a physical multi-fingered robotic hand. Our approach combines three key components. First, we introduce a Real2Sim tactile calibration pipeline that constructs a contact-calibrated digital-twin simulator capable of reproducing real tactile signals. Second, we improve the expressiveness of sparse tactile observations using a layout-aware tactile encoder, which incorporates sensor-geometry priors through self-supervised pretraining. Third, to improve generalization to unseen objects, we train object-specific reinforcement-learning experts in the calibrated simulator and aggregate their successful grasp trajectories into a tactile-conditioned Diffusion Policy. We evaluate our method on a physical LEAP Hand equipped with distributed tactile sensing across 10 seen and 10 unseen objects. The deployed policy achieves a 27% real-world grasp success rate across all 20 objects, without real-world grasping demonstrations or visual input. Simulation ablations show that layout-aware tactile pretraining improves grasping performance, while sensing-level evaluations confirm that Real2Sim calibration increases the consistency of tactile contact events between simulation and hardware. Together, these results suggest that contact-event calibration, geometry-aware tactile representation learning, and diffusion-based policy aggregation provide an effective path toward tactile-only blind grasping on real dexterous robotic hands. Project page:Dex-Blind-Grasp.github.io.

Contrastive Reinforcement Learning (CRL) has seen recent success in a wide variety of goal-conditioned robotics tasks by learning structured representations of the dynamics. However, despite its success in locomotion and simpler control domains, CRL often struggles in interaction-rich manipulation. We argue that a key source of this difficulty is object-centric interaction, such as contact or grasping, that induces distinct changes in the underlying dynamic modes. In this work, we formulate manipulation dynamics as a piecewise-smooth Markov process and show that interaction-induced mode changes create piecewise nonlinear reachability structures that are difficult for standard CRL energy functions to represent and plan over. Based on this analysis, we introduce Interaction-weighted Resampling (IWR). IWR performs interaction-aware resampling around phases before, during, and after interactions, encouraging the learned representation to preserve the mode boundaries that determine future reachability to capture multi-modal and piecewise nonlinear reachability. Across interaction-centric environments, including 2D dynamic control, robotic manipulation, and robot air hockey, IWR improves both sample efficiency and overall performance over prior CRL methods, with 19.8% average improvement in simulation. Finally, using a sim-to-real pipeline with policies trained by IWR, we demonstrate the first real-world goal-conditioned robot air hockey agent capable of hitting goals, improving success from 25% to 60%. Project Page: IWR-arxiv.github.io.

We present a generalist position control policy capable of controlling arbitrary multirotor configurations of a certain rotor count (e.g., hexarotors or quadrotors) with a single set of network weights. The policy is conditioned on a physics-grounded embodiment descriptor: a mass and inertia-normalized control allocation matrix that captures how mass-normalized motor thrusts generate linear and angular accelerations in the body-frame. To train the policy, we sample from a broad distribution of arbitrary multirotor configurations, including non-planar and asymmetric systems, and optimize a single, compact network using Proximal Policy Optimization. Training requires only five minutes on an RTX 3090 GPU using a custom NVIDIA Warp-based dynamics simulator. Through extensive simulation experiments, we show that embodiment conditioning enables robust generalist control across arbitrary morphologies. We demonstrate zero-shot real-world transfer of this generalist policy on three diverse hexarotor systems, including a planar robot, a partially symmetric non-planar system, and a random asymmetric, non-planar configuration.

Real-world robotic manipulation tasks often involve forceful interactions with the environment, such as using tools of varying weights, transporting objects with different masses, and performing contact-rich tasks like table wiping. Previous learning-based approaches typically employ imitation learning policies that output target end-effector poses tracked by low-level impedance controllers. In these systems, forceful interactions are either implicitly realized through steady-state tracking errors or explicitly commanded using wrist force/torque or tactile sensors. However, implicit approaches generalize poorly across object weights, while explicit approaches require specialized hardware and increase system complexity. In this work, we propose IMPACT, a framework that decouples these forceful tasks into task-planning and internal-model-based predictive control. Extensive simulation and real-world experiments demonstrate that the proposed framework achieves higher success rates and improved generalization to unseen object weights, as well as better safety and energy efficiency.

Reconstructing dynamic and interactive 3D scenes from real-world observations remains a fundamental challenge in computer vision and robotics. While recent advances in 3D Gaussian Splatting have enabled high-fidelity static reconstruction, extending it to interactive environments with articulated robots and manipulable objects remains difficult due to complex contact interactions and abrupt pose changes. To address these challenges, we introduce ManiSplat, a unified framework that reconstructs controllable and decoupled Gaussian digital twins directly from monocular ego-view robotic videos. Our method introduces a Graph-Structured Disentangled Representation that separates the robot, objects, and background into independently optimizable Gaussian subfields organized within a scene graph. To ensure stability, we propose a Task-Oriented Spatio-Temporal Alignment module that leverages the inherent logic of manipulation tasks-alternating between Motion and Skill phases-to construct accurate pseudo-ground-truth trajectories. Finally, a joint photometric-geometric optimization ensures the reconstructed scenes are temporally coherent, physically consistent, and simulation-ready. Extensive experiments demonstrate that our approach reconstructs interaction-driven dynamic scenes with high fidelity and controllability, effectively supporting downstream robotic tasks and policy learning.

Robotic foundation models pre-trained on human demonstration videos have shown promise, but a significant embodiment gap remains when the resulting policies are deployed on real robots. A common remedy is to fine-tune these models on robot-specific demonstrations. However, robot data collection can be prohibitively expensive and time-consuming, which is particularly acute in dexterous manipulation, e.g., teleoperating a multi-fingered hand for even a single atomic task can take days. To address this, we introduce Dexterous Point Policy, a framework that learns dexterous manipulation policies directly from human videos and requires no robot demonstrations. Our core insight is that a unified 3D keypoint representation can bridge human and robot embodiments when used for both observations and actions. Specifically, we extract 3D keypoints of task-relevant objects and human hands from raw videos, and train an autoregressive transformer over these keypoints. We observe that at the keypoint level, specifically the wrist and fingertips, human and robot behaviors closely align, enabling direct policy transfer. On a suite of real-robot tasks spanning pick-and-place and tool use, Dexterous Point Policy attains 75.0% success, whereas a state-of-the-art VLA baseline reaches only 1.0%. Furthermore, our method generalizes strongly to unseen scenarios, including multi-object environments and novel object categories.

Vision-language-action (VLA) models have shown strong promise for robotic manipulation, but their reliability at test time remains limited by one-shot action prediction, where even small action errors can cause grasp failure, collision, or incorrect task progression. A natural alternative is to equip VLA systems with test-time verification, allowing multiple candidate actions to be proposed and evaluated before execution. However, reliable action verification is challenging because it requires not only distinguishing subtle geometric differences between candidate actions, but also assessing whether an action makes meaningful progress toward the task goal. We present VeriSpace, a 3D-aware action verifier for test-time action selection in VLA systems. VeriSpace evaluates candidate actions through two key components: Dual-Path 3D-Injected Scene Encoding, which constructs a scene representation that jointly preserves visual semantics and explicit 3D geometry, and Spatially-Grounded Action Reasoning, which evaluates each action by reasoning over task-relevant spatial relations, geometric validity, and expected goal progress. Together, these components enable more reliable discrimination between subtle yet outcome-critical action candidates while remaining fully compatible with existing VLA policies. Experiments on public benchmarks and real-world robotic manipulation tasks show that VeriSpace consistently improves decision reliability over both underlying VLA policies and prior verification-based methods, yielding substantial gains in both in-distribution and out-of-distribution settings.

Real-robot evaluation is essential for understanding whether learned manipulation policies can operate reliably outside curated demonstrations. This need is particularly pressing for Universal Manipulation Interface (UMI)-style policies, whose performance depends on the coupling between wrist-view observations, action representation, data collection, and physical deployment. Existing real-world benchmarks have made important progress, but they are not designed around this UMI data-to-deployment setting. We present UMI-Bench 1.0, a local-first real-robot benchmark for standardized evaluation of UMI-style manipulation policies. To the best of our knowledge, this is the first benchmark dedicated to real-world evaluation of UMI-based manipulation models. UMI-Bench aligns data collection, scene reset, policy execution, result logging, and task-factor analysis within a unified protocol. By making the full evaluation process reproducible and auditable, UMI-Bench provides a practical testbed for measuring how UMI-trained policies generalize to real physical manipulation.

Hierarchical vision-language-action (Hi-VLA) systems have emerged as a promising paradigm for complex robot manipulation, by using high-level VLM planners to decompose tasks into language subgoals executed by low-level VLA controllers. Despite recent empirical progress, there is a lack of unified design principles for these systems: existing Hi-VLA systems differ in how they choose and connect planners, controllers, mechanisms to switch between the two, and how observations and memory are represented in the planner. In this paper, we present a systematic study of Hi-VLA design for robot manipulation. We unify representative Hi-VLA agents under an options-style control framework and benchmark core design choices across short-horizon, long-horizon, and reasoning-intensive tasks. Our analysis distills practical principles for building Hi-VLA systems, showing how model choices and interface mechanisms jointly shape performance. Applying these principles yields a substantially stronger system than either flat VLA control or a naively designed hierarchy, across experiments both in simulation and on a real ALOHA robot. Overall, our results provide a foundation for building more capable, robust, and principled hierarchical VLA agents. More information and video at jiahenghu.github.io/hi-vla.

World-Action Models (WAMs) have emerged as a promising paradigm for embodied control by coupling future visual prediction with action generation. However, most existing WAMs rely on photorealistic future prediction, which incurs high inference latency and makes real-time robot deployment difficult. This motivates a more efficient WAM design that preserves the control benefits of future visual prediction while reducing its inference cost. We introduce Efficient-WAM, a World-Action Model that reduces the cost of future imagination while preserving its control benefit. Efficient-WAM improves inference efficiency via a compact video expert transferred from WAN-2.2-5B, token-sparse video latents, and asymmetric video-action denoising that allocates fewer sampling steps to video than to actions. Instead of optimizing the future branch for visual fidelity, Efficient-WAM treats future video prediction as a compact guidance signal for action generation. Comprehensive experiments on RoboTwin 2.0 and real-world manipulation tasks show that Efficient-WAM maintains strong action performance despite visibly coarse future predictions. While maintaining competitive control capabilities, our 1B-parameter model can reduce per-chunk latency to around 100 ms during physical deployment, achieving a 30x speedup over existing WAMs.

We present GHOST, a framework for learning visuomotor manipulation policies that generalize beyond the training distribution. GHOST factorizes control into (i) a high-level policy that predicts the next sub-goal as a distribution over 3D end-effector poses from multi-view RGB-D observations, and (ii) a low-level goal-conditioned controller that executes embodiment-specific actions. To condition image-based policies on 3D goals, we introduce a simple spatial interface that projects predicted goals into the image plane and represents them as end-effector heatmaps. Across a suite of manipulation tasks, this hierarchical factorization consistently improves performance and robustness compared to a flat Diffusion Policy. Further, we show that this hierarchical interface also makes it easy to incorporate human demonstrations without relying on (noisy) action retargeting. As sub-goals are largely embodiment-agnostic, we train the high-level policy on human video to specify how learned skills should be applied and composed, while keeping the low-level policy trained purely on robot data. This hierarchy enables adaptation to novel objects and task variations using a small number of human demonstrations.

Embodied world models have emerged as a pivotal paradigm for visual robotic decision-making and interactive environment simulation. However, conventional embodied frameworks rely on low-dimensional structured action vectors (e.g., joint angles and end-effector poses), which suffer from limited expressive capacity, poor generalization across diverse embodiments, and unnatural dynamic modeling for complex physical interactions. To address these limitations, this paper proposesiMac (Image as Action Control), a novel unified control paradigm that treats raw visual images as native action representations for embodied world models. Departing from traditional explicit kinematic action encoding, iMac formulates continuous visual manipulation as image-based action tokens, which inherently encapsulate spatial motion intentions, interactive geometric constraints and subtle physical dynamics. We construct a dual-branch embodied architecture consisting of an image-action encoder and a dynamic world predictor: the encoder compresses target-driven visual images into compact action embeddings, while the predictor learns environment transition rules conditioned on image actions to achieve high-fidelity future state prediction and closed-loop embodied control. Extensive experiments are conducted on public embodied manipulation benchmarks and real-world robotic scenarios. The results demonstrate that iMac outperforms vector-based action control baselines in prediction accuracy, task success rate and cross-scene generalization ability. Moreover, our image-action design eliminates the reliance on manually defined action spaces, realizing flexible and universal control for heterogeneous embodied agents. This work provides an innovative visual-action perspective for embodied world models, offering a simple yet effective paradigm for scalable robotic perception and manipulation.

Human hand-object interactions encode functional intent, but direct transfer to robotic hands often fails under morphology, contact, and reachability constraints. We present SynManDex, a synthetic pipeline that uses generated human pre-grasps as affordance-aware proposals and resolves the final contacts with robot-native optimization. SynManDex samples object-conditioned digital human pre-grasps, retargets them to dexterous robotic hand poses, optimizes force-closure contacts on the target embodiment, and admits trajectories that pass checks from each step. The resulting keyframes support both grasp-and-lift demonstrations and various prehensile manipulation tasks such as tea pouring, photo taking, and flute playing, designed via VLM agents. As a result, SynManDex combines high grasp quality (86.4% grasp stability) with 4.67/5 human-likeness (93.4%). It achieves 80.7% successes in simulation and 25/30 (83.3%) real-robot successes when applied to a 36-DOF bimanual dexterous robotic platform.

Dexterous manipulation presents substantial challenges for imitation learning due to its high-dimensional action space and complex contact-rich dynamics. Policies trained purely from demonstrations often suffer from compounding errors during deployment and require large amounts of expert data to achieve reliable performance. To move beyond the limitations of demonstration data, in this work, we propose DexPIE, a post-training framework for dexterous policy improvement from experience collected through real-world deployment. First, DexPIE enables effective exploration coverage through a dexterous-hand-adapted intervention system and multi-stage DAgger-style data collection across initial and intermediate task stages, providing reliable supervision for accurate policy evaluation. To reduce temporal noise between post-training rollouts and demonstration data, we introduce asynchronous inference in the relative action space, which better aligns rollout data with demonstrated behavior and allows the critic to learn a value function induced by a more consistent underlying policy. Finally, DexPIE improves the policy through conditioning on a continuous optimality indicator, allowing the policy to leverage the quality of data in a more fine-grained manner. Across three challenging real-world dexterous manipulation tasks, DexPIE achieves a 37% improvement in success rate over the demonstration-based reference policy, outperforming all baseline methods and demonstrating stronger robustness. The source code and dataset will be made publicly available.

Vision-Language-Action (VLA) models have become a powerful framework for robotic manipulation, and recent studies have introduced tactile or force feedback into VLAs to address contact-rich tasks. However, these models are typically deployed as offline policies. When contact conditions shift from the training distribution, the policy cannot perform online adaptation, leading to problems such as inappropriate contact forces and inefficient retries. Therefore, we propose TORL-VLA, a tactile-guided online reinforcement learning framework that couples tactile feedback with policy refinement for contact-rich manipulation. Our method introduces a tactile-derived wrench-aware VLA to predict reference actions and future wrench sequences, while a lightweight online RL module is used to refine the reference actions. To stabilize learning from mixed exploratory policy-generated and human-intervention data, we introduce an intervention-censored critic that prevents post-intervention success from being wrongly credited to policy-generated actions preceding intervention. Real-robot experiments on long-horizon contact-rich tasks, including latch manipulation, coffee-cup placement, and egg handling, show that TORL-VLA improves success rates at both subtask and full-task levels, as well as time-bounded execution efficiency over strong baselines. Project page: https://torl-vla.github.io/

Vision-Language-Action (VLA) models have demonstrated strong generalization in robotic manipulation, yet existing evaluations are primarily conducted in simulation or on expensive robotic platforms, leaving their robustness on affordable real-world robots largely unexplored. We present a standardized real-world benchmark for evaluating representative VLA and imitation learning policies on the low-cost SO-101 robotic platform. The benchmark comprises four representative manipulation tasks together with unified evaluation protocols, enabling systematic comparison under embodiment uncertainty. Using real-world teleoperated demonstrations, we fine-tune and evaluate $π_{0.5}$, SmolVLA, Wall-X, and ACT directly on the physical platform. Beyond conventional task success rates, the benchmark incorporates a structured failure taxonomy, semantic- and execution-level failure decomposition, and recovery-aware evaluation metrics to characterize policy robustness. Experimental results show that stronger pretrained VLA policies generally outperform the imitation learning baseline, although performance remains highly task-dependent under low-cost robotic deployment conditions. Execution instability emerges as the dominant failure source, while recovery capability varies substantially across architectures. These results highlight the importance of failure and recovery analysis beyond binary task success and establish SO-101 as a practical benchmark for evaluating embodied AI systems under realistic low-cost robotic deployment conditions.

Visual world models have shown great potential in learning complex system dynamics. Recent advancements leverage these models as transition functions within Model Predictive Control (MPC) frameworks to solve various control tasks. When applied to robotics, however, they are limited to single-stage tasks such as reaching or grasping, and struggle with multi-stage ones that demand complex sequential planning. In this work, we introduce WorldDP, a world model framework designed for multi-stage robotic manipulation. Our hierarchical approach utilizes a high-level world model as a transition function to optimize for feasible subgoals during runtime, which are subsequently reached by a low-level Diffusion Policy. To further aid in learning dynamics and planning, we incorporate object-centric representations that decouple environmental entities and enable us to plan sequentially with respect to each. Evaluated across several robotics benchmarks, WorldDP consistently outperforms existing baselines, validating that coupling the world model's physically grounded planning with diffusion policy's efficient execution yields superior multi-stage performance.

Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by $26.7$ percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9$\times$ faster training and 1.8$\times$ faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

''Thinking with Images'' has emerged as an effective paradigm for fine-grained visual reasoning: by explicitly zooming into relevant regions and reasoning over crops, models can access local evidence that is difficult to recover from a single global image. However, this benefit comes with redundant tool invocations and longer inference traces. Moreover, when such behaviors are learned mainly from outcome reward, the resulting intermediate crops or visual cues can be noisy or fail to faithfully capture task-relevant visual evidence. In this work, we ask whether the reasoning benefits of ''Thinking with Images'' can be internalized through Thinking with Imagination: an internal process that decides where to look and imagines what visual cues closer inspection would reveal without actually invoking tools. We propose Imagine-OPD, an on-policy self-distillation framework in which a teacher plays the role of a ''Thinking with Images'' reasoner during training: it receives privileged zoomed evidence views derived from annotated regions, and supervises the model's own imagination reasoning trajectories. Imagine-OPD does not require an external teacher or high-quality imagination demonstrations. Experiments on vision-centric benchmarks show that Imagine-OPD achieves the best average performance among compared models while significantly reducing inference overhead compared with ''Thinking with Images'' methods.

Diffusion-based visuomotor policies operating directly in raw action spaces conflate scene comprehension with trajectory generation within a single denoising process. The resulting velocity field must simultaneously encode scene information and generate precise trajectories, increasing learning complexity and limiting performance on tasks demanding precise temporal coordination across multiple arms. To simplify this joint learning problem, we introduce Latent Diffusion Policy (LDP), a two-stage framework performing flow matching in a deliberately shaped latent space. By absorbing scene understanding into an observation-conditioned CVAE encoder, LDP concentrates the conditional distribution of each observation. Consequently, the flow model avoids implicitly resolving scene-dependent structures; instead, it generates within a pre-concentrated distribution featuring a smoother velocity field, simplifying learning from limited demonstrations. Furthermore, to capture temporal dependencies among latent tokens, LDP trains with per-token diffusion forcing and employs staircase inference sampling to resolve the resulting distributional mismatch. We also propose reconstruction FID (rFID) as a lightweight proxy predicting downstream task success solely from latent space statistics. On coordination-intensive tasks from RoboTwin 2.0, LDP outperforms DP3 by a substantial margin and transfers effectively to real-world bimanual deployments.

Robotic manipulation robustness often founders on the physics gap between simplified simulations and the resistance-laden real world. In this work, we emphasize that physical realism in articulated interaction is an important ingredient for robust policy learning. We present Real-IKEA, a dataset and simulation framework designed with physical accuracy as a first-class goal. Real-IKEA provides 1,079 articulated asset configurations, derived from 83 authentic IKEA handles and knobs processed through a meticulous six-step physical workflow. For contact-geometry accuracy, we introduce a bidirectional surface-deviation metric to quantify collision meshes. For dynamics realism, we establish resistance-calibrated configurations that vary damping and friction. Crucially, we demonstrate through a Reinforcement Learning (RL) policy that high-fidelity assets enable the discovery of robust "hooking" and "levering" strategies that prioritize mechanical advantage over fragile friction-pulling. Together, these results position Real-IKEA as a critical benchmark for developing manipulation policies capable of human-level robustness in articulated object tasks.

Force signals provide critical interaction cues for contact-rich robotic manipulation. However, existing methods mostly use force as an additional observation modality, without fully exploiting its role in modeling future interaction dynamics or guiding execution-time feedback correction. In this paper, we propose FAWAM, a force-aware world action model that incorporates force information at three levels: perception, prediction, and closed-loop execution. FAWAM first encodes historical 6-axis force/torque signals to modulate action generation, then jointly predicts future actions and end-effector wrenches to explicitly model contact evolution. It further introduces a residual correction module that uses the predicted wrench trajectory as an execution-time reference to refine actions online based on real-time force feedback. Real-world experiments across multiple contact-rich tasks show that FAWAM improves the average success rate by 36.25% over vision-only baselines and 21.25% over existing force-aware baselines, demonstrating the effectiveness of our force-aware framework for robust contact-rich manipulation.

Unmanned aerial vehicles (UAVs) are increasingly being deployed in logistics, service robotics, and other real-world applications, creating a growing demand for autonomous payload acquisition and delivery. Existing approaches typically assume pre-attached payloads or rely on specialized grippers, leaving versatile end-to-end aerial delivery largely unresolved, where different payloads induce highly variable flight dynamics, requiring a single policy to adapt online without manual calibration or explicit system identification. To this end, we study \textbf{A}utonomous \textbf{A}erial Manipulation via \textbf{Co}ntextual \textbf{Co}ntrastive Meta Reinforcement Learning (\textbf{\textit{Aco2}}), a fully autonomous aerial delivery setting in which a quadrotor equipped with a lightweight hook continuously picks up, transports, and delivers diverse handle-equipped objects between randomized locations, all without human intervention. First, we design a contextual observation encoder that infers a compact latent context from recent interaction history, enabling the policy to adapt online to payload-dependent dynamics. To further improve the quality of this context, we introduce a contrastive objective that structures the context embedding around task-relevant variations, improving generalization across diverse payloads without requiring explicit system identification. Trained entirely in simulation with extensive domain randomization, \textit{Aco2} can be directly deployed on a physical quadrotor without real-world fine-tuning.

Vision-Language-Action (VLA) models achieve strong benchmark performance but still struggle in real-world deployment with unseen objects, background shifts, and different robot embodiments. We argue that this stems from the lack of a unified geometry-aware manipulation representation, leaving existing VLAs vulnerable to low-level trajectory supervision, misaligned 3D features, and embodiment differences. To address this, we propose GEAR-VLA, a VLA framework for learning unified geometry-aware action representations for generalizable robotic manipulation. GEAR-VLA adopts coarse-to-fine action learning, where multi-source embodied pretraining equips the VLM with embodied reasoning and discrete action understanding before latent action tokens connect action semantics to a gradient-decoupled DiT continuous action expert. It further performs semantic-aligned 3D integration by aligning a trainable 3D spatial backbone with the VLA representation while freezing the original VLM-aligned visual pathway. To share this representation across robots, GEAR-VLA uses embodiment canonicalization, where embodiment-aware states and embodiment-invariant actions confine robot differences to the low-level interface. Extensive simulation and real-world experiments demonstrate strong generalization: GEAR-VLA achieves state-of-the-art performance on LIBERO, zero-shot LIBERO-Plus, and RoboTwin 2.0, reaches 85.9% success on AgileX and 81.0% on the pretraining-unseen LDT-01 embodiment, and obtains 90.1% success on a 6,360-trial universal grasping benchmark with 212 unseen objects. Code and models will be released at https://github.com/babynabeauty/GEAR-VLA.

Enabling humanoid robots to operate in complex, dynamic environments remains a critical challenge, fundamentally limited by the ability to navigate robustly, safely, and accurately. While reinforcement learning with velocity-commanded policies has achieved remarkable robustness in humanoid locomotion, this approach lacks explicit control of the foothold placement, leading to unsafe behavior, such as stepping onto human feet, or imprecise navigation, hindering the following manipulation task. Conversely, explicit foothold-tracking policies offer a promising alternative by directly being commanded with target foot poses. However, existing approaches are often limited by unrealistic state assumptions, compromising real-world deployment, or they are part of staged pipelines, making them tied to specific downstream tasks. In this work, we introduce a novel, lightweight framework for training general-purpose 3D foothold-tracking policies. By dynamically providing footstep support through a goal sampler, this method enables the learned policy to be agnostic to specific terrains. Our new target representation effectively mitigates challenges arising in the real world, such as noisy and inaccurate pose estimation and foot contact estimation. Designed for direct real-world transfer, our policy acts as a standalone low-level controller that can be seamlessly paired with various high-level foothold generators. We demonstrate the effectiveness of our framework through extensive experiments in simulation and in the real world. By coupling our policy with different upstream planners, we achieve natural and accurate locomotion in challenging settings, paving the way for loco-manipulation tasks in complex environments.

The growing volume of retired lithium-ion battery packs from electric vehicles and portable electronics calls for automated disassembly that is safe, flexible, and selective down to the individual cell. Existing robotic systems, however, mostly assume known pack poses, external fixtures, or specialised tooling, leaving fixture-free cell-level disassembly under pose uncertainty largely unsolved. This paper presents a vision-guided dual-arm pipeline that disassembles a 21-cell 18650 pack from an arbitrary initial pose using only general-purpose parallel-jaw grippers, RGB-D sensing, and a pre-trained grasp detector. Pose uncertainty is absorbed by a learn-and-filter perception stack with discrete look-and-move wrist-camera corrections, while a mid-task support transfer between the two arms extends the effective workspace without any external clamp. The pipeline achieves an 8/10 end-to-end success rate, a cell-localisation root-mean-square error of $2.4$,mm, and a mean cycle time of 6.0,minutes per pack, providing a practical, fixture-free building block for industrial battery recycling.

Manipulation understanding requires reliable relational evidence, such as contact, support, containment, motion coupling, grasp, release, and active-hand involvement. Although these visual predicates are widely used in event-chain, graph-based, and neuro-symbolic models, their reliability under visual degradation is rarely analyzed directly. This paper introduces a predicate-level reliability framework for robust manipulation understanding under blur, occlusion, illumination change, low resolution, frame dropping, and detection noise. The framework defines a structured predicate vocabulary, confidence-aware predicate estimation, and reliability metrics for predicate preservation, degradation sensitivity, temporal consistency, confidence-weighted stability, and downstream impact. Experiments on controlled manipulation videos and public egocentric or bimanual datasets, including VISOR/EPIC-KITCHENS, H2O, and ARCTIC, show that predicate failures are structured rather than uniform. Static spatial predicates remain comparatively robust, whereas contact-sensitive, dynamic, and derived predicates such as grasp and release are more fragile. Under severe degradation, detection noise, occlusion, and frame dropping cause the strongest reliability losses. Downstream analysis shows that degraded predicates reduce manipulation-understanding accuracy from 0.89 to 0.58, while removing confidence weighting under moderate degradation reduces accuracy from 0.74 to 0.64. These results show that predicate reliability provides a diagnostic layer between visual perception and structured manipulation reasoning.