Robotics

Follow this topic Ask about this topic

Momentum

82 papers in the last four weeks, up 413% on the four weeks before. 0.8% of all new papers.

Jul 13Week of Sep 28

Latest papers 488

Jun 8, 2026cs.RO

Deterministic Execution of ROS 2 Applications via Lingua Franca

The Robot Operating System 2 (ROS 2) is a widely used middleware for robotic systems, characterized by a publish-subscribe (pub-sub) communication mechanism in which computation is structured as callbacks dispatched by ROS 2 executors. Despite its popularity, the pub-sub pattern in ROS 2 is inherently nondeterministic: the order in which these callbacks run is nondeterministic even within a single executor, and distributed deployments add further nondeterminism from the interleaving of messages across nodes and from network latency. Such nondeterminism often leads to concurrency issues and makes it virtually impossible to analyze for safeness and provide guarantees. We present a framework that is able to convert an unmodified ROS 2 application and run it under Lingua Franca (LF), a coordination language for deterministic execution using logical time, so that the same input always produces the same deterministic execution order. We first describe which ROS 2 features can be executed deterministically under logical time. Such features enable the possibility to establish an automatic conversion framework to extract information from a ROS 2 application and directly convert it into an LF program. The rich features of LF, such as logical-time delays, federated execution across processes, and fault handling, can then be applied to make the ROS 2 application be executed in a deterministic and timing-predictable manner without changing the ROS 2 code. We evaluate the framework on a synthetic example and on the Autoware reference system. We show that the order in which callbacks are executed differs in default ROS 2, while also having end-to-end latencies that vary across executions. In contrast, our LF-controlled ROS 2 system produces a deterministic execution order and consistent end-to-end latencies.

Harun Teper, Shaokai Lin, Shulu Li +2

TU Dortmund University · Dortmund, Germany · University of California, Berkeley +3

Jun 8, 2026cs.RO

Autonomous Obstacle Removal for Excavators through Policy Learning with Particle Simulation

Autonomous obstacle removal from the ground is an important earthwork task, but this is difficult to automate because an excavator must adapt its excavation trajectories over repeated cycles as soil-obstacle conditions change. Learning such state-dependent behavior requires a training environment that reproduces accumulated soil-obstacle interactions, including contact states, terrain deformation, and obstacle visibility. Accordingly, particle-based simulation is suitable for the relevant policy learning. However, particle simulation is computationally expensive, and repeated excavation cycles further increase the learning cost. We observe that the burial condition of an obstacle governs both task difficulty and simulation cost: deeper burial makes obstacle removal harder while also requiring more particles for accurate simulation. This observation motivates a burial-conditioned curriculum learning strategy. We propose a time-efficient sim-to-real policy learning framework in which the policy observes terrain and obstacle information from RGB-D measurements and then outputs a parameterized excavation trajectory; in this process, the simulator reproduces in a real-world excavator the same observation-action interface it uses under controllable burial conditions. The curriculum begins with shallow burial conditions and progressively increases burial depth while adjusting particle count, thus simultaneously controlling task difficulty and simulation cost. Experiments show that the proposed framework successfully learns an effective obstacle-removal policy, whereas baseline methods fail even after a full week of training. The proposed curriculum achieves effective performance within three days and achieves successful transfer to a real 12-ton excavator operating on open ground with various steel obstacles, thus demonstrating robust obstacle removal.

Yuki Kadokawa, Sandro M. Alcantara Tacora, Taro Abe +4

Nara Institute of Science and Technology · Public Works Research Institute, Ibaraki 300-2621, Japan

Robot Policy Learning Sim-to-Real Transfer Robotics Curriculum Learning

Jun 7, 2026cs.RO

Tessellated Biomes: Distributed Robotic Assemblies for Architectural Resilience

This paper presents Tessellated Biomes, a cyber-physical framework for the adaptive robotic construction and reconfiguration of modular multi-material assemblies. It challenges the linear lifecycle of standard construction by fusing (1) local microfactory fabrication, (2) discrete multi-material optimization, and (3) distributed robotic assembly into a unified circular process of spatial adaptation. The research details methods for the digital fabrication of self-aligning modular primitives in multiple materials (PLA, timber, and concrete) produced in local microfactories; the aggregation and optimization of these primitives into compression-based discrete structures; and the deployment of custom quadrupedal robots that collaboratively relocate material into realized physical aggregations. The framework is validated through the fabrication, optimization, and robotic assembly of discrete structures. Together, these results position Tessellated Biomes as a model for resilient, reconfigurable architecture.

Sergio Mutis, Eric Hughes, Gert Duvenhage

MIT · UCL

Cyber-Physical Systems Robotic Construction Modular Robotics Robotics Robotic Assembly

Jun 6, 2026cs.RO

Cybernetic Android Avatar "Yui": System Integration, Field Deployment, and Evaluation

Remote communication technologies have become widely used; however, supporting a sense of shared physical space and conveying rich non-verbal cues remain challenging in many social interaction scenarios. This study presents "Yui," a full-body cybernetic android avatar designed to integrate operator-side immersive teleoperation with interlocutor-side human-like social signaling. Yui combines a 55-degrees of freedom full-body mechanism with a previously developed android head, facial expression and gaze control, upper-body and arm motion, hand actuation, and a mobile platform. It can be operated through either the immersive mode using a head mounted display-based interface or desktop mode using a webcam-based interface. We evaluated the system through three real-world deployments: a long-term public exhibition at Expo 2025 in Osaka, Kansai, Japan; a remote educational exchange between elementary school students; and a public interaction study with general participants. During the Expo deployment, two units accumulated approximately 1131 h of operation, demonstrating both operational feasibility and maintenance challenges. In the public study, both operators and interlocutors reported positive impressions of co-presence and willingness to use the system. Interlocutors also rated the avatar positively in terms of human likeness and the transmission of emotions and intentions. The results indicate usability for general operators while suggesting room for improvement in precise controllability. These findings provide field-derived evidence and design implications for socially deployable full-body android avatars.

Kaoruko Shinkawa, Mizuki Nakajima, Taisei Mogi +1

Department of Mechanical and Intelligent Systems Engineering, Graduate School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, 182-8585, Tokyo, Japan. · Department of Mechanical Engineering, Graduate School of Engineering, Tokyo Denki University, 5 Senjuasahicho, Adachi-ku, 120-8551, Tokyo, Japan.

Robot Teleoperation Robotics Human-Robot Interaction Social Robotics Humanoid Robotics

Jun 5, 2026cs.RO

Rapid co-design of Buoyancy-assisted robots for Challenging Locomotion using Gaussian Evolutionary Specialists

Designing high-performance legged robots requires jointly optimizing morphology and control. Model-free Reinforcement Learning (RL) offers an alternative to model-predictive control for developing robust controllers without explicitly specifying robot dynamics. Thus, we have seen theuse of RL to train controllers and evaluate designs for robot morphology optimization. While RL has shown success inlocomotion, using it in the co-design inner loop is expensive due to repeated policy training. Universal policies conditioned on morphology offer a promising alternative, but suffer from behavioral diversity collapse, converging to a single strategy that performs sub-optimally across designs. On the other hand, end-to-end Mixture-of-Experts (MoE) architectures fail due to a collapse in its representation. We propose Gaussian Evolutionary Specialists (GES), a framework that decouples design-space partitioning from policy learning to capture diverse behaviors explicitly. GES assigns specialist policies to evolving Gaussian regions and iteratively refines them via training, probing, and territory expansion. The resulting specialists are integrated into a design sampling loop, replacing costly re-training with direct evaluation. When tested on the Buoyancy-Assisted Light Legged Unit (BALLU), GES discovers designs with 5 - 25% higher performance than naive universal policies. On hardware, a GES optimized design overcomes a 24 cm tall obstacle - 3x improvement over the baseline BALLU design. Moreover, GES curtails design optimization time by 37%.

Ankit Sinha, Nitish Sontakke, Dennis Hong +2

School of Interactive Computing, Georgia Institute of Technology, TSRB 85 5th St NW, Atlanta, GA - 30332, USA · Dept. of Mechanical and Aerospace Engineering, University of California, Los Angeles, 420 Westwood Plaza, CA 90095, USA · Robotic Systems Lab, ETH Zurich, Leonhardstrasse 21, 8092 Zurich, Switzerland

Legged Robotics Robot Morphology-Control Co-Design Evolutionary Optimization Robotics RL for Legged Locomotion

Jun 5, 2026cs.RO

An Abstract Architecture for Explainable Autonomy in Hazardous Environments

Autonomous robotic systems are being proposed for use in hazardous environments, often to reduce the risks to human workers. In the immediate future, it is likely that human workers will continue to use and direct these autonomous robots, much like other computerised tools but with more sophisticated decision-making. Therefore, one important area on which to focus engineering effort is ensuring that these users trust the system. Recent literature suggests that explainability is closely related to how trustworthy a system is. Like safety and security properties, explainability should be designed into a system, instead of being added afterwards. This paper presents an abstract architecture that supports an autonomous system explaining its behaviour (explainable autonomy), providing a design template for implementing explainable autonomous systems. We present a worked example of how our architecture could be applied in the civil nuclear industry, where both workers and regulators need to trust the system's decision-making capabilities.

Matt Luckcuck, Hazel M Taylor, Marie Farrell

Department of Computer Science, & Hamilton Institute„ Maynooth University„ Ireland · Department of Computer Science„ University of Manchester„ United Kingdom

Explainable Artificial Intelligence Robotics Human-Robot Interaction

Jun 5, 2026cs.RO

Learning All-Terrain Locomotion for a Planetary Rover with Actively Articulated Suspension

This paper presents ERNEST, a four-wheeled planetary rover concept equipped with a two-degree-of-freedom Active Gimbal Suspension that combines yaw and roll actuation to enable wheel reconfiguration, steering, and active load redistribution. A single neural network controller, trained to track a desired path across challenging terrain, fully unlocks the capabilities of this actuated suspension system for autonomous obstacle negotiation. A reinforcement learning framework is developed using the high-fidelity DARTS simulation engine, which combines rigid-contact dynamics and Bekker-Wong terramechanics, enabling the emergence of locomotion strategies adapted to loose-soil conditions. To obtain a single unified controller across heterogeneous terrains, a policy consolidation strategy merges the experience of terrain-specialized agents into one neural network, eliminating the need for explicit terrain classification and controller switching. The resulting controller operates on a combination of proprioceptive and exteroceptive feedback, including sparse stereo-derived terrain elevation, chassis attitude, joint states, and force-torque measurements. Zero-shot transfer to the physical rover is achieved through domain randomization, sensor noise injection, and model-to-real system identification. Experimental results demonstrate autonomous traversal of rock fields, a Bickler trap (bump obstacle), a wheel-high step, sand ripples, and sandy slopes. On a 20° sandy slope, the learned controller reduces the cost of transport by 37% on dry sand despite the additional actuation, and achieves superior performance on wet sand where the passive suspension becomes completely immobilized. A video accompanying this paper is available at https://youtu.be/d684P5a3xMc

Arthur Bouton, Tristan D. Hasseler, Michael Paton +5

Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 USA · Center for Autonomy, University of Texas at Austin, Austin, TX 78712 USA · Space Systems Laboratory, University of Maryland, MD 20742 USA

Off-Road Robot Navigation Robotic RL Robotics Terrain-Aware Robot Locomotion Vehicle Dynamics Robot Locomotion+1

Jun 4, 2026cs.RO

L-SDPPO: Policy Optimization of Spiking Diffusion Policy for Intra-vehicular Robotic Manipulation

Intra-vehicular robots in spacecraft help reduce astronaut workload and improve mission efficiency. Recent research focuses on using deep learning methods to achieve the acute control required for operations in these complex environments. However, objects exhibit unpredictable, unconstrained drift without gravitational damping. These factors demand robustness against complex multimodal action distributions. Diffusion policies (DP) can model these complex actions, but their iterative sampling process consumes too much energy for the limited power budgets of spacecraft. We therefore propose a low-energy intra-vehicular robotic manipulation framework, L-SDPPO, in which the Spiking Diffusion Policy (SDP) is optimized with a reinforcement learning (RL) algorithm. Furthermore, to address the insufficient perception of dynamic spatiotemporal features in microgravity, we propose the statedependent latency injection (SDLI) mechanism, which mimics biological neural delays to dynamically regulate the timing of input information. Evaluation on five representative intra-vehicular daily tasks (e.g., hatch opening and precision container capping) shows that our method consistently achieves higher success rates and lower energy consumption, compared to the state-of-the-art robotic manipulation methods. These results demonstrate our method is a viable intra-vehicular robotic manipulation method.

Liwen Zhang, Dong Zhou, Guanghui Sun +4

Department of Control Science and Engineering, Harbin Institute of Technology, Harbin 150001, China · Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR, China

Space Robotics Robotic RL Robotics Diffusion Policy Spiking Neural Networks Robotic Manipulation

Jun 4, 2026cs.RO

Gotta Grow Fast: Design and Benchmarking of a Tip Mount for High-Speed Vine Robots

Soft, growing vine robots extend through tip eversion, a mechanism that enables navigation through cluttered environments. However, integrating cameras and other sensors at the tip is uniquely challenging because the material forming the tip is constantly renewed as the robot grows. This continual material turnover, combined with friction between internal layers, added tip weight, and fabric constriction, complicates sensor and tool mounting. These limitations hinder the deployment of vine robots for inspection and search tasks, where rapid growth while carrying tip-mounted sensors is essential. In this work, we present a triangular roller tip mount that reduces internal resistance during growth by rolling rather than sliding against the robot body. The design was refined through iterative failure analysis, enabling, for the first time, consistent eversion on a TPU-coated ripstop nylon vine robot. To quantitatively evaluate mount performance, we introduce a custom testbed that isolates tip mounting effects by measuring tail tension during eversion. Comparative experiments across multiple mount variants, including prior designs, show that our triangular roller mount achieves the lowest tail tension and most repeatable growth performance. These results establish both a validated tip mount design and a repeatable benchmarking framework for advancing sensor and tool integration in soft growing robots. CAD for the mount and testbed is available at: https://sprout-mitll.github.io/tip_mounts/.

Antonio Alvarez Valdivia, Robert Reeve, Ankush Dhawan +4

Lincoln Laboratory, Massachusetts Institute of Technology, Lexington, Massachusetts, USA

Robotics Soft Robotics

Jun 4, 2026cs.RO

Towards a Data Flywheel for Embodied Intelligence in Logistics

Embodied intelligence is moving from laboratory demonstrations toward industrial deployment, with the logistics industry serving as a key application scenario. Learning-based policies offer a promising path beyond traditional perception-planning-control pipelines, but their scalability depends on how embodied data can be collected, organized, and reused. This research studies a data-centric framework for industrial embodied intelligence by constructing a logistics data flywheel. Our framework converts daily operations into reusable data assets, uses World Models to generate reliable supervision for long-tail parcel manipulation, and feeds deployment feedback back into policy improvement. As an initial result, \textit{WM-DAgger} introduces a World-Model-based data aggregation framework that synthesizes out-of-distribution recovery data for robust imitation learning. Building on this result, ongoing work explores how large-scale in-the-wild multimodal data, including labeled human demonstrations, unlabeled operational videos, and system-level robot logs, can be aligned for policy learning and transformed into feedback for continual system improvement.

Anlan Yu, Zaishu Chen, Zhiqing Hong +1

Peking University Beijing, China · JD Logistics Beijing, China · HKUST (Guangzhou) Guangzhou, China

Synthetic Data Generation for Robotics Robotics Robot Imitation Learning Dataset Aggregation Embodied World Models

Jun 4, 2026cs.RO

Learning of Robot Safety Policies via Adversarial Synthetic Scenarios

In this work, we propose an agentic gamification framework for hazard-informed learning of robot safety policies through synthetic scenarios. We model scenario generation as an adversarial game between two agents: a Red Team that explores the space of potential failures by constructing hazardous situations, and a Blue Team that incrementally refines safety policies to prevent them. This iterative process enables efficient discovery of high-risk edge cases that are unlikely to be captured through random simulation or manual enumeration. By combining classical risk modeling with adversarial scenario generation and modern learning paradigms, this work provides a scalable pathway for embedding safety into Physical AI systems operating in complex real-world environments. The paper describes ongoing work. The contribution is a problem formulation and a proposed solution architecture.

Nikolai Dorofeev, Alexey Odinokov, Rostislav Yavorskiy

SafePI.ai Grenoble, France · SafePI.ai Belgrade, Serbia · SafePI.ai Madrid, Spain

Robot Policy Learning Adversarial Scenario Generation Synthetic Data Generation for Robotics Robotics Robot Safety Safe RL

Jun 3, 2026cs.RO

Efficient Computation of Distance Functions for Navigation Vector Fields in Lie Groups

Vector-field-based methods are widely used for robot control and are often applied to the path-tracking problem. Some vector field approaches require repeatedly computing the distance between the robot configuration and the curve, as well as the corresponding closest point. Recently, vector fields have been extended to Lie Groups. In this case, this computation can be expensive, especially when performed at high control frequencies on embedded platforms. This paper proposes a method for efficiently computing the distance between a point and a curve represented as what is called a G-polynomial curve, which is a curve representation that generalizes polynomial curves to matrix Lie groups. The proposed approach exploits the structure of these curves to reduce the problem to a small number of polynomial root-finding computations. Simulation results show that the method significantly reduces computation time while maintaining accuracy compared to existing optimization-based approaches. Practical formulas are also provided for the case of the group SE(3), and the method is validated experimentally on a robotic manipulator. The methodology is implemented in a computational package, available online.

Vinicius M. Gonçalves, João Baião, Felipe Bartelt +4

Robotic Control Robotics Lie Group Methods

Jun 3, 2026cs.RO

Real-World Deployment of a 5G-Connected Edge-Controlled Aerial Robot in Industrial Subterranean Mines

This article presents the first real-world autonomous flight of a 5G-connected aerial robot controlled by an edge-offloaded controller, and aims to bridge the gap between controlled and factual setups. The robot operates within an active industrial subterranean mine, while the high-level controller is deployed in a nearby Kubernetes-based edge cluster. Communication between the robot and the edge is enabled via a 5G New Radio (NR) Standalone (SA) network. The chosen controller is a Model Predictive Controller (MPC), which generates control actions to allow the robot to navigate seamlessly through the mining environment. A human operator selects waypoints for the aerial robot, and the MPC generates smooth, collision-free paths for autonomous executions. The proposed 5G edge-based closed-loop system is evaluated in a real industrial setting and demonstrates the potential of edge-controlled robotic systems toward time-critical, safe and efficient future deployments.

Achilleas Santi Seisa, Emanuele Pagliari, Gerasimos Damigos +2

Robotic Control Aerial Robotics Robot Navigation Edge Computing Robotics

Jun 3, 2026cs.RO

MineXplore: An Open-Source Reinforcement Learning Exploration Benchmark for GNSS-Denied Underground Environment

Underground mines present extreme conditions for autonomous robot navigation: GPS is denied, lighting is degraded, and tunnel topology is loop-rich and non-convex. Simulation benchmarks grounded in real production-mine geometry and compatible with GPU-accelerated learning pipelines do not yet exist in the open-source ecosystem. We present MineXplore, an open-source MuJoCo-based navigation benchmark derived from the Leung et al. 2017 Chilean underground copper mine dataset. The environment reconstructs a 104,423 sq.m tunnel network through an six-stage contour-to-MJCF pipeline incorporating octagonal wall cross-sections, LiDAR-sourced jagged wall geometry, three terrain friction zones, a global 5 degree incline, and periodic spot lighting. Geometric fidelity is validated at an Intersection over Union (IoU) of 0.9538 against the source survey map, and surface texture similarity scores 79.4% across six structural dimensions. A single-agent PPO baseline trained via RLlib across five independent random seeds achieves a best rolling coverage of 88.89% (3 of 5 seeds reaching the 90% coverage target), confirming that MineXplore supports stable and reproducible policy learning under realistic underground sensing and topology.

Abhishek S, Badrikanath Praharaj, Sreeram MV

BuildMachineLabs

RL Benchmarks Robot Navigation Robotics RL Exploration

Jun 2, 2026cs.RO

Auditing LLM-Governed Social Robots with Culture-Specific Moral Gradients

LLM-governed social robots increasingly decide who receives real-world assistance first. As prioritization norms vary across cultures by age, status, and group size, failure to calibrate pluralistically can scale into unequal access. Yet LLM moral audits remain English-centered, rarely test embodied contexts, leaving pluralistic calibration as an urgent diagnostic gap amid intensifying LLM-robot deployment. We introduce a gradient-based audit framework for multilingual evaluation of LLM moral trade-off behavior against cultural preference gradients. Grounded in nine cross-domain social robotics reviews (>8,000 papers), we derive symmetry-controlled scenarios across care, education, and services, translating the Moral Machine Experiment's "whom to spare" into "whom to assist first" dilemmas with preserved identity trade-offs (many vs. few; young vs. old; higher vs. lower status). We audit four LLMs across four country-language pairs in four prompting regimes (57,600 decisions), benchmarked against country-specific MME preference gradients. Ordinal concordance tests whether models differentiate cultural contexts; a governance typology maps vulnerabilities in gradient differentiation, directional tendency, and deliberation. We find persistent, culturally asymmetric gradient tracking failures that prompting alone cannot reliably correct: quality calibration is nearly twice as strong for Western-language decisions as for Chinese and Japanese; high determinism in majority-first trade-offs often erases cross-cultural gradients; partial sensitivity to age- and status-based norms risks sidelining minorities. Prompting effects are uneven; only contrastive exemplars yield consistent gains, while reasoning-only prompts can worsen tracking. Our results motivate multilingual, pluralistic audits as an LLM-robot pre-deployment gate and suggest model factors are a more robust lever than prompting alone.

Carmen Ng, Gjergji Kasneci

Technical University of Munich, Munich, Germany

Multilingual Language Model Evaluation Moral Reasoning in Language Models LLM Auditing Robotics Cultural Bias in Language Models Social Robotics

Jun 2, 2026cs.RO

OpenEAI-Platform: An Open-source Embodied Artificial Intelligence Hardware-Software Unified Platform

Embodied AI in the real world requires both accurate hardware and robust vision-language-action (VLA) policies. We present OpenEAI-Platform, a fully open-source platform that integrates a low-cost 6+1 degree-of-freedom (dof) robotic arm (OpenEAI-Arm) and a reproducible VLA model (OpenEAI-VLA). OpenEAI-Arm provides open-source mechanical designs for low manufacturing cost and compliant control methods for higher accuracy. OpenEAI-VLA builds on Qwen3-VL-4B and uses a Diffusion Transformer action head, and is trained in two stages with only open-source robot and multimodal datasets. Across four real-world manipulation tasks, OpenEAI-Arm outperforms two commercial 6+1-dof arms under the same policy, and OpenEAI-VLA achieves success rates comparable to the large-scale pretrained pi0 baseline with only limited pretraining data. We will release the full hardware designs, drivers, models, and training/data pipelines to support reproducible research and scalable data collection. Our codes, layouts, and models will be released after the paper is accepted.

Jinyuan Zhang, Luoyi Fan, Leiyu Wang +4

1Shanghai Innovation Institute · 2Huazhong University of Science and Technology · 3Shanghai Jiao Tong University +1

Robotic Control Robotics AI Control Robotic Manipulation Vision-Language-Action Models Embodied AI

Jun 2, 2026cs.RO

Autonomous Navigation System for Library Service Robot Based on Unitree Go2 Edu

Libraries require autonomous robots to move quietly through narrow aisles while remaining safe around readers, chairs, bags, and carts. This paper presents a ROS 2 navigation system for a Unitree Go2 Edu quadruped equipped with a 4D LiDAR, a front depth camera, and an IMU. Rather than assuming the library is rough terrain, we target the practical mobility discontinuities of real deployments, including floor transitions, temporary clutter, and partially blocked passages where low-clearance wheeled platforms are less tolerant. RTAB-Map is used for visual-LiDAR SLAM, AMCL and EKF-based sensor fusion provide localization, and a Nav2 stack with A* and DWA supports planning and local avoidance. In a real library, the system achieves 100%, 96%, and 88% success rates in static, low-density dynamic, and high-density dynamic scenes, while map validation against surveyed control distances yields a mean metric error of 3.7 cm.

Aoduo Li, Haoran Lv, Bingquan Ou +3

Guangdong University of Technology · Shenzhen Polytechnic University

Robot Navigation Robotics

Jun 2, 2026cs.RO

How Visible Are Silent Manipulation Failures? An Observability Study of False-Success Detection in Simulated Robot Episodes

Imitation-learning policies for robot manipulation inherit the quality of the success labels attached to their training episodes, and those labels are usually produced by the robot's own success check. A particularly damaging error is the false success: an episode the robot logs as a success when the task outcome was actually wrong. We ask a narrow but practical question about these episodes. Once an episode has already been flagged as a success, how much of the information needed to overturn that label is present in proprioception, and how much requires vision? We build a simulated testbed on two bimanual ALOHA tasks, induce failures through environment perturbations rather than label edits, label every episode by privileged simulator state that the detector never sees, and keep only episodes the robot flagged as successful. We then compare detectors restricted to proprioception against a vision-based detector. We find that recoverability spans a wide range: in cube transfer the false successes are almost fully recoverable from joint data alone, while in peg insertion proprioception recovers only part of them and a vision detector closes most of the gap. We also show that the proprioceptive separability we measure rests on velocity differences far below any realistic sensor noise floor, so it is best read as an optimistic upper bound that a noiseless simulator inflates. We release the generation and evaluation pipeline.

Aarav Bedi

University of California, Berkeley · Department of Mechanical Engineering University of California, Berkeley Berkeley, California, USA

Robot Failure Detection Bimanual Robotic Manipulation Robotics Robotic Perception

Jun 2, 2026cs.RO

ModuLoop : Low-Level Code Generation using Modular Synthesizer and Closed-Loop Debugger for Robotic Control

Large Language Models (LLMs) have demonstrated impressive performance across various domains, including code generation and problem solving. However, their application in robotic control, particularly in low-level tasks that require precise manipulation, real-time feedback, and environment-dependent execution, remains limited. To address this challenge, we propose the Closed-Loop Modular Code Synthesizer framework. This framework leverages a pre-trained LLM without any task-specific fine-tuning to perform modular code planning and generation, and iteratively executes the generated code while inserting debugging probes to observe its behavior. This closed-loop structure facilitates systematic debugging and refinement, ultimately producing executable control programs. We apply the proposed framework to the calibration of an RGB-D camera and a robotic arm, validating its effectiveness in real-world settings. Furthermore, through a subsequent pick-and-place task, we demonstrate not only the accuracy of the calibration but also the potential extensibility of the framework. Across both tasks, the framework achieved high execution accuracy and autonomy, illustrating the practicality and scalability of LLM-based robotic control using our framework.

Gina Yoon, Sumin Lee, Joo Yong Sim

Department of Mechanical Systems Engineering, Sookmyung Women’s University, Cheongpa-ro 47-gil 100, Yongsan-gu, Seoul, 04310, South Korea

Robotic Control Language Model-Based Control Code Generation Robotics

Jun 2, 2026cs.RO

Hybrid Dynamics Modeling for a Flexible 2-DoF Robotic Arm

This paper examines three approaches for modeling the dynamics of a flexible-link 2-DoF robotic arm to address unmodeled dynamics not captured by rigid-body models. Two physics informed models combine rigid-body dynamics (RBD) formulations with a Gaussian Mixture Model (GMM) to capture residual model errors and linkage flexibility. A kinematics-based regression model serves as a purely data-driven baseline. Using an open-source dataset, torque predictions are first estimated using Ridge regression on kinematic features, while the physicsbased baseline is constructed from published specifications, and ordinary least-squares regression is subsequently used to estimate the same parameter set directly from data. Results show that the physics-based parameters yield the poorest accuracy, while regularized and least-squares estimators align more closely with measured torques. Residual analysis and error metrics highlight the limitations of purely parametric models for flexible-link systems and underscore the value of regularization and data-driven identification, supporting developments of semi-parametric residual learning methods.

Maciek Popik, Daniel Yang, Mahdis Bisheban

Dept. of Mechanical and Manufacturing Eng at the Schulich School of Engineering, University of Calgary, Alberta, Canada · Intelligent Dynamics and Control Lab, University of Calgary, Alberta, Canada

Robot Dynamics Identification Nonlinear System Identification Robotics Inverse Dynamics

Jun 1, 2026cs.RO

Improved Postural Stability Using a Lightweight Semi-Active Soft Back Support Device Under Standing Perturbations

Older adults are particularly susceptible to falls following perturbations during standing, such as forward loss of balance. Back support devices that assist trunk extension may help mitigate fall risk by preventing excessive trunk flexion. Previous studies have investigated heavy back support devices; however, these systems often introduced adverse effects on stability due to their added mass, which shifted the body's natural center of mass unfavorably. In contrast, lightweight passive devices have shown limited benefits, as they can generate only modest assistive forces during the relatively small trunk flexion associated with forward balance loss. In this study, we evaluated the effects of a lightweight semi-active soft back support device on postural stability following standing perturbations. Our device combines an active element (a pneumatic artificial muscle) in parallel with a passive elastic band. The active element rapidly provides assistive force following a perturbation, overcoming the limitations of passive devices. Experiments conducted with five healthy individuals demonstrated that the semi-active device significantly reduced whole-body angular momentum and increased the margin of stability, indicating improved balance recovery performance. These results highlight the promise of semi-active soft wearable robots as an effective and lightweight strategy for fall prevention during standing perturbations.

Rohan Khatavkar, Jiefeng Sun, Hyunglae Lee

The authors are with the School for Engineering of Matter, Transport and Energy, Tempe, AZ 85287, USA.

Robotics Assistive Robotics Soft Robotics

Jun 1, 2026cs.RO

Permissive Safety Through Trusted Inference: Verifiable Belief-Space Neural Safety Filters for Assured Interactive Robotics

Autonomous robots that interact with people must make safe and efficient decisions under human-induced uncertainty, such as their preferences, goals, competency, and willingness to cooperate. Safety filters are a popular approach for ensuring safety in interactive robotics, since their modular design separates safety from performance, allowing robots to operate safely around people with minimal impact on task efficiency. While traditional safety filters typically operate only in the physical space, neglecting the robot's ability to learn and adapt online, the recently proposed belief-space safety filter (BeliefSF) reasons about robot safety in closed-loop with runtime inference that actively reduces the robot's uncertainty online, thereby reducing conservativeness in filtering. However, providing formal safety guarantees for robots deploying BeliefSF remains a significant challenge due to errors in runtime inference and neural approximation of safety filters required to handle the high dimensionality of belief spaces. In this paper, we propose an algorithmic approach to certify high-probability safety of BeliefSF using conformal prediction, while explicitly accounting for the reliability of the robot's runtime inference module. Our method leverages the structure of belief-space safety filtering by focusing verification on a region where inference is expected to be reliable. It preserves the simplicity and sample complexity of standard conformal prediction, yet can certify a substantially less conservative safety filter. Through a simulated human-vehicle interaction benchmark, we show that our approach verifies a significantly more permissive belief-space safety filter than a standard conformal prediction baseline.

Haimin Hu

Department of Computer Science, Johns Hopkins University, USA

Robotics Safety Filtering Human-Robot Interaction

Jun 1, 2026cs.RO

AFUN: Towards an Affordance Foundation Model for Functionality Understanding

Affordance understanding bridges visual perception and physical action, serving as an explainable interface for robot manipulation in open and unstructured real-world environments. Yet, building an affordance foundation model that not only understands where and how the interaction should happen, but also generalizes across diverse environments, objects, and tasks, remains a long-standing research challenge. Existing methods typically address only part of this challenge, either localizing task-relevant regions without specifying executable motion, or predicting motion but with limited scalability. In this paper, we present ourmodel, a step towards an affordance foundation model for functionality understanding. From a single RGB-D observation and a language task description, ourmodel predicts a task-conditional functional mask (where to interact) and a 3D post-contact motion curve (how to interact). To support open-world generalization, we build a large-scale standardized data pipeline that converts heterogeneous robot, human, simulation, and real-world scan data into a shared affordance schema with language, masks, and object-centric 3D motion labels. We evaluate ourmodel from three aspects: for affordance segmentation, ourmodel outperforms all baselines by a large margin across 8 test sets from 4 benchmarks, improving mean gIoU/cIoU by +23.9/+26.3; for contact-point prediction, it predicts substantially more accurate points, with a 12.7--61.3% hit-rate gain over the best baseline; and for 3D motion, it achieves the best performance on all three test sets. ourmodel can be deployed for real-world robot manipulation without finetuning for robot embodiment or using task-specific heuristics, demonstrating the ability to adapt to open-world affordance tasks. Project page: https://www.zhaoningwang.com/AFUN

Zhaoning Wang, Yi Zhong, Jiawei Fu +2

University of Michigan · University of California, San Diego · NVIDIA

Language-Conditioned Robot Manipulation Robot Foundation Models Generalization in Robotic Manipulation Robotics Robotic Manipulation

Jun 1, 2026cs.RO

Market-Based Replanning for Safety-Critical UAV Swarms in Search and Rescue Missions

Reliable autonomous UAV swarms in Search and Rescue (SAR) missions require fault-tolerant coordination capable of sustaining operations despite agent degradation. This paper introduces the Intelligent Replanning Drone Swarm (IRDS), a distributed coordination architecture designed for resource-constrained environments. The proposed framework employs a Reverse-Auction market mechanism where agents bid to service search sectors based on a distance-weighted cost function, coupled with a geometric consensus protocol for target verification. We evaluate the approach through physics-based simulations (N=8 agents, 8x8 grid) subjected to stochastic fault injection. Results indicate that the swarm autonomously reallocates tasks from failed agents with low latency relative to the total mission duration, maintaining a mission success rate of 93% under 25% workforce degradation. The proposed framework demonstrates a robust, empirically tested method for self-healing aerial robotic coordination.

Luiz Giacomossi, Andrea Haglund, Claire Namatovu +6

Mälardalen University (MDU) Västerås, Sweden

Aerial Robotics Swarm Robotics Robotics Multi-Robot Coordination Multi-Robot Task Allocation Search-and-Rescue Robotics

Jun 1, 2026cs.CV

RescueBench: Can Embodied Agents Save Lives in the Wild ?

Search-and-rescue (SAR) requires embodied agents to explore unfamiliar environments under multimodal uncertainty, perform multi-stage interactions, and retrieve spatial memory over long horizons. Existing benchmarks typically evaluate these capabilities in isolation, leaving unclear how failures compound when they must be composed in realistic workflows. We introduce RescueBench, a photo-realistic diagnostic benchmark that instantiates SAR as a four-stage pipeline: multimodal exploration, target rescue, memory-guided return, and final handoff. By combining sequential task composition with stage-level evaluation, RescueBench enables analysis of how exploration and memory failures propagate through embodied rescue workflows. It contains five progressive difficulty levels that vary in environmental complexity, clue ambiguity, and spatial hierarchy, along with an automatic episode generation and annotation pipeline for scalable evaluation and training. We evaluate seven baselines, an oracle reference, and human players, showing that no baselines complete the full task at the greatest difficulty. Stage-level diagnosis identifies autonomous exploration as the dominant failure mode and spatial memory as a second, independent bottleneck, suggesting that these limitations are not resolved by current topological visual-language navigation or map-based methods. Code is available in https://github.com/wukui-muc/RescueBench

Kui Wu, Beiyu Guo, Hao Chen +6

1Beihang University · 5ATEC2025 Challenge Committee · 4City University of Macau +2

Agent Memory Embodied Navigation Long-Horizon Agent Evaluation Robotics AI Agent Benchmarks Search-and-Rescue Robotics

May 31, 2026cs.MA

Coordinating Task Switching in a Robotics Multi-Agent System Using Behavior Trees

The application of multi-agent systems in robotics is a very challenging field. Several competitions involving such systems are proposed to foster research and development of strategies and mechanisms using games as the underlying domain. Among them are the ones from the \textit{IEEE Very Small Soccer (VSSS)} category, which is the case study described in this paper. In VSSS, two teams of three robots each compete in a very dynamic environment of a soccer game. Thus, coordination of robots' behavior during the game is crucial to win it. In this paper, we present a Behavior-Tree-based approach to support multi-robot coordination within the VSSS team of the ThundeRatz robotics team from the Universidade de S

\tilde{a}

o Paulo. Moreover, a comparison between the proposed approach and the previous one, which was based on a Finite State Machine (FSM), was conducted using the FIRASim simulator. Besides that, the performance of this new strategy was further evaluated in an academic robotics competition.

Lucas Haug, Anarosa Alves Franco Brandão, Arthur Casals

∗LTI - Laborat´orio de T´ecnicas Inteligentes, Universidade de S˜ao Paulo, SP

Robotics Multi-Robot Coordination Behavior Trees

May 31, 2026cs.RO

AI-IoT-Robotics Integration: Survey of Frameworks, Emerging Trends, and the Path Toward Connected Robotics

The convergence of Artificial Intelligence, the Internet of Things, and Robotics is no longer a futuristic vision; it is rapidly becoming the foundation of real-time, intelligent, and context-aware systems. AI enables perception and reasoning, IoT provides scalable sensing and communication, and robotics delivers embodied actuation. Despite significant progress in pairwise combinations such as AIoT and the Internet of Robotic Things (IoRT), there remains a lack of unified design frameworks that fully integrate all three. This survey synthesizes the state-of-the-art across these domains, emphasizing the emerging role of Small Language Models (SLMs) at the edge and Large Language Models (LLMs) in the cloud for distributed cognition and autonomous decision-making. We propose a modular system architecture that aligns with these trends, analyze persistent gaps in interoperability and feedback control, and classify existing work by integration depth. Our review highlights how hybrid SLM-LLM systems, when coupled with IoT infrastructure and robotic agents, can address challenges in real-time adaptation, scalability, and reliability. This work offers a conceptual and technical roadmap for designing next-generation AI-IoT-Robotic ecosystems that are modular, interpretable, and capable of learning within dynamic environments, paving the way for the emerging paradigm of Connected Robotics and Physical AI.

Ranulfo Bezerra, Satoshi Tadokoro, Kazunori Ohno

Tohoku University, Japan

Internet of Things Robotics

May 30, 2026cs.RO

Shape Your Body: Value Gradients for Multi-Embodiment Robot Design

We propose to turn generalist multi-embodiment value functions into reusable models for robot design. Instead of running a new reinforcement learning co-design loop for each robot, we first train an embodiment-aware policy and value function across many robot designs. After training, the frozen value function is used as a differentiable surrogate to optimize candidate embodiments through value gradients. We evaluate our approach across different robot design settings, from perturbed single robots to held-out robots across morphology classes, with single models trained on up to 50 robots and design spaces of over 1100 continuous embodiment parameters. Beyond optimizing complete embodiments, we show that value gradients can identify performance-limiting design and control parameters, enabling both the optimization and the analysis of new robot designs.

Nico Bohlinger, Jan Peters

Technical University of Darmstadt, Germany · Robotics Institute Germany (RIG); German Research Center for AI (DFKI); hessian.AI

Cross-Embodiment Robot Learning Robotic RL Robotics

May 30, 2026cs.OS

Edge-Based QoS-Aware Adaptive Task Placement: A Closed-Loop Control in Multi-Robot Systems

Multi-robot systems (MRS) increasingly offload compute-intensive perception tasks to edge nodes to meet strict time-sensitive Quality-of-Service (QoS) constraints. However, static task orchestration on a shared edge node can severely degrade QoS due to network latency, jitter, and edge-resource contention. We present a pilot edge-centric MRS testbed using Raspberry Pi nodes to evaluate a camera-to-manipulator pipeline under three modes: local execution, static offloading, and a QoS-aware Adaptive Task Placement (ATP) controller. ATP scores candidate placements using a multi-metric cost (normalized latency, CPU utilization, and switching overhead) over two-second control windows. The closed-loop visual servoing testbed is instrumented with sub-millisecond clock synchronization, network emulation, and detailed monitoring of multiple metrics across nodes to capture realistic jitter. Experimental results under compute-stress and network-fault scenarios show that static edge offloading reduces on-board CPU load but amplifies tail latency and deadline misses. In contrast, the QoS-aware ATP controller, by switching task placement based on measured latency and utilization thresholds, consistently lowers deadline violations and tail latency. Overall, the results position ATP as a practical edge-side control primitive for MRS and concrete design guidelines for Cloud-Edge Robotics deployments within the broader cloud-fog automation, while motivating QoS-aware multi-objective workload orchestration for industrial cyber-physical systems.

Thien Tran, Jonathan Kua, Thuong Hoang +3

Deakin University, Australia · RMIT University, Vietnam · Zhejiang University, China +1

Multi-Agent Orchestration Multi-Robot Systems Edge Computing Robotics Multi-Robot Task Allocation

May 30, 2026cs.HC

A Four-Tier Communication Architecture and Sim-to-Real Validation of a Graphical Open-Source Platform for Robotic Engineering Education

The persistent challenge in scaling authentic manipulator education within university laboratories is a structural dichotomy: commercial digital twins are often cost-prohibitive and rigidly scripted, whereas open-source robotics middleware (ROS) imposes steep technical and syntax barriers for novices. To resolve this logistical and educational friction, this paper proposes a scalable four-tier communication architecture tailored for sustainable robotic curricula. Rather than focusing on software application design, our study examines the underlying data exchange mechanisms required to bridge visual conceptual environments with physical robotic endpoints, utilizing the Graphical Open-Source Platform (GOSP) as a reference implementation. Our work details the framework's technical integration of 3D visual armature modeling with a robust ROS middleware backend, emphasizing the serialization, routing, and encapsulation of intricate communication routines. Preliminary sim-to-real validation using multi-axis spatial trajectories confirms that encapsulating these communication pipelines provides sufficient fidelity and a hardware-agnostic pathway. By bridging virtual design and physical execution, our architectural blueprint offers a viable infrastructure for engineering education.

Thien Tran, Khang Duong, Minh Tran +3

Deakin University, Australia · RMIT University, Vietnam · Swinburne University of Technology, Australia

Robotics Simulation Robotics Robotics Education