Robust Control

Recent advances in learning-based model predictive control (MPC) have leveraged neural networks for online model learning, achieving strong performance when nonstationary system dynamics deviate from nominal models. However, existing approaches primarily address specific or relatively structured forms of dynamical variation, leaving more general, unknown, and unpredictable time-varying dynamics insufficiently handled. To tackle this challenge, we propose T2S-MPC, a framework that adaptively learns a residual dynamics model online and integrates it with the nominal model within the MPC framework to enable fast-evolving online planning. To make the model time-aware, we explicitly encode temporal information through a structured time embedding and employ a two-timescale update scheme, allowing the controller to capture nonstationary dynamics while balancing rapid adaptation with stable learning. We evaluate the proposed method on a 2D quadrotor across stabilization and trajectory tracking tasks under diverse time-varying disturbances, including linear drifting and periodic perturbations. Experimental results show that T2S-MPC consistently outperforms classical MPC, neural MPC, and ablated variants in control performance, while also demonstrating strong robustness across a wide range of disturbance conditions without additional tuning. The source code is publicly available at https://github.com/Zeyuu0920/T2S_MPC

This paper presents a low-complexity, model-free, output-feedback controller for a class of unknown time-varying nonlinear systems with unknown input constraints. The controller achieves the preset control accuracy when the actuator is not saturated and maintains flexible control accuracy after actuator saturation. This result extends existing constraint control methods for linear manifolds to a more general form, including the construction of nonlinear manifolds and various types of constraints, thereby achieving preset control accuracy within finite or fixed time. Additionally, flexible control under unknown saturation is achieved through the construction of an error-driven flexible constraint. Finally, second-order and higher-order control examples and simulations are provided.

Isoperimetric robotic trusses can adapt to different tasks and environments due to their high strength-to-weight ratio and the ability to reconfigure dramatically into new shapes. However, motor failures in operational environments can severely limit capability if not properly addressed. This paper presents a fault-tolerant control framework for an inflatable robotic truss that maintains functionality despite motor failures, demonstrated through three key contributions. First, we extend the kinematic optimization to handle arbitrary combinations of motor failures by imposing equality constraints to ensure failed actuators are not used. Second, we introduce discrete-time control barrier function (DTCBF) constraints that, under the assumed kinematic model, mathematically guarantee structural rigidity while maximizing workspace utilization. Third, we implement closed-loop position control using onboard encoder feedback and a forward-kinematics-based state estimator, improving positional accuracy in the presence of disturbances. We validate our approach through simulation and hardware experiments on a 2D isoperimetric truss testbed. For a 2D configuration with 6 actuators, we demonstrate >62% workspace preservation under single-motor failures, a >22% reduction in tracking RMSE using failure-aware closed-loop control relative to the fully functional open-loop baseline, and a 39% closed-loop RMSE reduction over failure-unaware open-loop control under unmodeled partial actuator degradation. These results establish a foundation for more robust and resilient isoperimetric truss robots operating under degraded actuation.

Reliable robotic manipulation requires control policies that can accurately represent and adapt to uncertainty arising from contact-rich interactions. Modern data-driven methods mitigate uncertainty through large-scale training and computation, and degrade significantly in performance with limited number of training samples. By contrast, classical model-based controllers are computationally efficient and reliable, but their limited ability to represent task-relevant uncertainty can hinder performance in contact-rich interactions. In this work, we propose to expand the capabilities of model-based manipulation control through more flexible uncertainty modeling that retains performance while exactly adapting to uncertainty. Our approach casts the manipulation problem as a distributionally robust control optimization and proposes a novel deterministic formulation based on Stein variational inference that preserves performance while explicitly modeling task-sensitive parameter uncertainty. As a result, the derived controllers are more aware of task sensitivities to uncertainty, yielding high reliability without compromising performance. Experimental results demonstrate up to 3$\times$ improved robustness across a range of contact-rich manipulation tasks under broad parametric uncertainty, outperforming existing model-based control methods.

Robotic systems are vulnerable to False Data Injection Attacks (FDIAs), where adversaries corrupt sensor signals to gain malicious control. Feedback linearization exposes robotic systems to integrator vulnerability, making them susceptible to stealthy attacks that can cause significant deviations in end-effector behavior without raising alarms. This paper addresses the resilience of manipulators against finite-horizon FDIAs by formalizing two defense methods, namely anomaly-aware virtual damping and manipulability reduction, with probabilistic guarantees on nominal task execution. Simulations on a 7-DOF redundant manipulator show that the proposed defenses substantially reduce the impact of FDIA compared to using solely a threshold-based ADS like the Chi-squared, while preserving nominal task performance in the absence of attack.

High-resolution seafloor mapping necessitates stable and precise positioning for underwater robots. This paper introduces a novel mathematical model for SeaVis remotely operated towed vehicles (ROTVs) and develops a gain-scheduled linear-quadratic regulator (LQR) for robust depth and attitude control. We validate the approach in a high-fidelity simulation, benchmarking the LQR against a conventional PID controller over a challenging seabed profile. The presented results demonstrate the LQR's superior performance, with significantly enhanced robustness to disturbances, greater control efficiency, and substantially reduced flap actuation. The gain scheduling also confirms the controller's effectiveness across the full operational velocity range. The complete simulation environment and controller are open-sourced.

Positive-negative pressure regulation is critical to soft robotic actuators, enabling large motion ranges and versatile actuation modes. However, achieving high-performance regulation across both pressure polarities remains challenging due to asymmetric inflation-deflation dynamics, valve nonlinearities, and switching-induced flow disturbances. This paper presents BiPneu, a scalable and cost-efficient multi-channel bipolar-pressure pneumatic system for soft robots that enables wide-range, accurate, and responsive pressure regulation while providing seamless compatibility with high-level software ecosystems. A dual-mode sliding-mode controller (DM-SMC) with hysteresis-supervised mode selection is proposed based on a hybrid electro-pneumatic model. Extensive simulation and experiments demonstrate the superior performance of DM-SMC in tracking step and sinusoidal pressure references compared with both advanced model predictive controllers and well-tuned PID controllers. Experimental results show average absolute errors of 1.44 kPa in multi-step tests and 4.23 kPa in sinusoidal tracking, corresponding to reductions of 11.9% and 35.6% relative to PID control, along with improved control effort, valve switching rate, and transient response. Robustness of DM-SMC is further verified on a bellow actuator with pressure-dependent volume. Finally, BiPneu's capability is demonstrated via two soft robotic examples, quick ball-maneuvering with a soft parallel manipulator and real-time finite element method (FEM)-based teleoperation of a soft bellows actuator.

Fully actuated multirotor platforms decouple translational force generation from vehicle attitude, enabling independent control of position and orientation and shifting performance limitations from attitude authority to actuator dynamics and control effectiveness. This paper compares a model-based nonlinear dynamic inversion controller (geometric NDI) with a sensor-based incremental dynamic inversion controller (INDI) on a fixed-tilt fully actuated hexarotor. Both controllers share an identical outer-loop structure and are both executed at 500 Hz; therefore, performance differences can be attributed primarily to the inversion strategy. Controller performance is evaluated in five experiments covering attitude step tracking under nominal conditions and under a 50% mismatch in the rotor force coefficient, hover disturbance rejection under an external lateral load, waypoint tracking in the presence of wind gust disturbances, reduced control frequency, and injected sensor degradation. The results show that INDI offers clear advantages under parameter mismatch, gust disturbances, and sensor degradation, and maintains lower position errors across the controller-frequency sweep. However, its advantages are not universal: geometric NDI yields better attitude tracking at reduced control frequencies. To the authors' best knowledge, this work presents the first experimental validation of a full pose tracking INDI controller with decoupled translational and rotational dynamics. These findings highlight the trade-off between measurement-based and model-based inversion for robust control and rapid deployment of fully actuated UAVs.

Koopman operator theory provides a powerful framework for representing nonlinear dynamics through a linear operator acting on lifted observables, enabling the use of linear control techniques for nonlinear systems. However, Koopman models are typically learned from data and often degrade in performance under model uncertainty and distributional shifts between training and deployment. Although several works have explored online adaptation to address this issue, many rely on neural network-based updates that introduce significant computational overhead and lack formal safety guarantees, limiting their suitability for real-time and safety-critical robotic applications. In this work, we propose a unified framework for continual adaptive Koopman learning that enables safe and efficient online refinement of learned models during task execution. An autoencoder-based Koopman model is first learned offline and subsequently refined online through a contractive adaptation law, which provides theoretical convergence guarantees under distributional shifts and model uncertainty. To improve data efficiency and accelerate model refinement, the adaptation mechanism is integrated with an active learning strategy that drives the system to collect informative data while accomplishing task objectives. The resulting control problem is formulated as a nonconvex optimization problem incorporating both active learning objectives and safety constraints. We further derive theoretical bounds on model approximation error and show how these bounds can be incorporated within a robust Model Predictive Control (MPC) framework to provide formal safety guarantees. The proposed approach unifies learning, excitation, and safety within a single control framework without sacrificing real-time feasibility. Extensive simulation and experimental studies demonstrate superior performance compared to state-of-the-art baselines.

Close-proximity offshore wind turbine inspection requires strict clearance control around large cylindrical structures under wind and model mismatch. Nominal Nonlinear Model Predictive Control (NMPC) may violate safety constraints when mass, inertia, thrust effectiveness, drag, or wind conditions differ from nominal assumptions. We propose a sensitivity-based robust NMPC for a tilted multirotor that robustifies the tower-clearance constraint via online constraint tightening. First-order parametric state sensitivities provide a structured-uncertainty margin, while bounded gusts are handled by a stage-dependent additive margin. The formulation augments the nominal NMPC with sensitivity propagation and margin evaluation only, leaving the receding-horizon optimization structure unchanged. Monte-Carlo evaluation over 500 uncertainty realizations on a boundary-critical helical inspection trajectory shows that the proposed controller eliminates the clearance violations observed under nominal NMPC at the cost of a moderate increase in solve time.

This work presents a simulation-based comparative robustness analysis of Incremental Nonlinear Dynamic Inversion (INDI) and Nonlinear Dynamic Inversion augmented with a nonlinear disturbance observer (NDI+NDO) for fully actuated aerial robots. A systematic simulation campaign across representative operating scenarios is conducted, where we compare tracking performance, robustness, control effort, under parametric variations, external disturbances, and measurement noise. Results show that INDI demonstrates stronger robustness in several model-mismatch and combined-stress cases, while NDI+NDO primarily matches nominal performance but exhibits greater sensitivity under several non-ideal conditions. These findings provide practical guidance on the relative strengths and limitations of incremental and observer-based inversion strategies for aerial robotic applications.

It has recently been shown that all physical parameters of an Incremental Nonlinear Dynamic Inversion (INDI) controller can be estimated onboard a multirotor within half a second, which is fast enough to do the full identification during a throw in the air. However, a robust method to tune outer loop gains for this feedback-linearizing INDI controller depending on the model parameters is still missing. This work presents the design of a robust gain-scheduled controller for attitude control of quadrotor, using an INDI-based inner loop with online identification of its system parameters. A gain-scheduled cascaded attitude controller with a feedforward filter is synthesized for a symmetric quadrotor using signal-based $\mathcal{H}_\infty$ closed-loop shaping. The resulting controller exhibits good stability margins, with nonlinear simulations confirming effective tracking performance under uncertainty. Experimental evaluation is also conducted through flight tests with full online parameter identification. Even though the identified parameters during these tests are far outside the defined uncertainty range, acceptable flight performance comparable to simulation results is maintained for actuator time constants below 40 ms.

Koopman-based neural MPC models generate time-varying dynamics from historical data, but preserve convexity by enforcing that the system operator is independent of the current control input. This conditional independence constraint limits adaptation to changing dynamics within a single MPC horizon, particularly under time-varying conditions and under stale-plan execution. We propose Bilinear Mamba-Koopman Neural MPC, a minimal extension that introduces control-dependent coupling in the latent dynamics, allowing the effective operator to adapt to the current input. The resulting model is a strict generalization of the standard linear, conditional-independence formulation, adds less than 1% parameters through a low-rank structure, and admits exact model Jacobians that enable efficient Sequential Convex Programming (SCP) with monotone-descent and KKT convergence results under standard trust-region assumptions. Across CartPole and RSCP benchmarks in time-invariant and time-varying regimes, the proposed model matches or improves forecasting accuracy on every cell when training noise is averaged out, with strict gains where control-state coupling is structurally present. Its main closed-loop gains appear in the RSCP TV task, where iterative SCP improves adaptation within the horizon and substantially stabilizes training; in CartPole TV, the gains are modest but consistent. In delayed re-planning experiments on the time-varying variants, the bilinear model degrades more gracefully under stale-plan execution, maintaining a consistent advantage on CartPole TV and a substantially larger robustness margin on RSCP TV. These results show that control-dependent latent dynamics provide a simple and effective mechanism for robust MPC under varying conditions.

Minimum-fuel low-thrust rendezvous guidance yields bang-bang control structures highly sensitive to estimation errors, sensor anomalies, and solver regularization, making aggressive closed-loop execution brittle for uncooperative proximity operations. This paper proposes a tightly-coupled estimation and guidance architecture where navigation confidence directly modulates the homotopy parameter of a receding-horizon indirect optimal control solver. Relative motion is modeled in the Clohessy-Wiltshire frame. The translational state is estimated via a linear Kalman filter augmented by a Multiple Tuning Factors (MTF) covariance inflation mechanism that suppresses suspicious innovation directions. A composite score from the normalized innovation and MTF activity is mapped online to the homotopy parameter, allowing the controller to relax toward a smoother, conservative regime when confidence degrades, and recover fuel-efficient bang-bang control as sensing improves. Numerical results under severe measurement degradation show fixed bang-bang guidance remains brittle; both plain-KF and MTF-KF fixed-epsilon controllers yield large terminal miss distances. Conversely, the proposed MTF-adaptive homotopy controller reduces terminal miss by roughly two orders of magnitude, from hundreds of meters to sub-meter levels, requiring only a moderate increase in control effort versus the open-loop fuel-optimal benchmark. A comparison indicates adaptive homotopy is the dominant robustness mechanism, while MTF provides additional accuracy and efficiency improvements. The receding-horizon implementation exhibits consistently fast and reliable solution times, supporting the practical online viability of the proposed method.

Biological neural systems achieve remarkable robustness and adaptability in uncertain environments through sparse, event-driven spike-based information processing and adaptive regulation. Inspired by this paradigm, this paper develops a neuromorhpic disturbance observer (NDO) and control framework that replaces conventional continuous-time signal representations with spike-timing encoding. Both disturbance estimates and control inputs are constructed via integrate-and-fire (IF) neuron dynamics from discrete spike events, yielding intrinsically event-driven updates. An adaptive-threshold triggering mechanism is inspired by spike-frequency adaptation (SFA), enabling history-dependent regulation of spike generation. Simulation results demonstrate that the proposed framework achieves neurally inspired robustness and adaptability, while the adaptive-threshold spiking scheme reduces spike events to 42.6% of the fixed-threshold case under noisy conditions.

Model Predictive Path Integral (MPPI) control is a powerful sampling-based strategy for nonlinear autonomous systems. However, its performance is often bottlenecked by the fidelity of nominal dynamics. We propose ICODE-MPPI, a robust framework that leverages Input Concomitant Neural Ordinary Differential Equations (ICODEs) to learn and compensate for unmodeled residual dynamics. Unlike discrete-time learners, ICODEs maintain physical consistency and temporal continuity during the MPPI prediction horizon. High-fidelity simulations on complex trajectories demonstrate that ICODE-MPPI achieves up to a 69% reduction in cross-tracking error under persistent disturbances compared to standard MPPI control. Furthermore, our analysis confirms that ICODE-MPPI significantly suppresses control chattering, yielding smoother steering commands and superior robust performance.

Agentic systems involved in high-stake decision-making under adversarial pressure need formal guarantees not offered by existing approaches. Motivated by the operational needs of security operations centers (SOCs) that must configure endpoint detection and response (EDR) policies under adversarial pressure, we present a tool-mediated architecture: LLM agents use deterministic tools (Stackelberg best-response, Bayesian observer updates, attack-graph primitives) and select from finite action catalogs enforced at the tool-output interface. A composite Lyapunov function machine-checked in Lean 4 with zero sorry certifies controllability, observability from asymmetric sensor data, and Input-to-State Stability (ISS) robustness under intelligent adversarial disturbance, with two corollaries extending the certificate to any controller or adversary from the catalogs. On 282 real enterprise attack graphs, the claims hold with margin. On paired offensive/defensive telemetry, a tool-mediated Claude Sonnet 4 controller reduces the attacker's expected payoff (game value) by 59% relative to a deterministic greedy baseline, with zero variance across 40 runs at four temperatures. A Claude Haiku 4.5 controller converges to suboptimal game values but stays catalog-bounded over an additional 40 runs, demonstrating that architectural stability is not dependent on the controller capability. The LLM agent's non-determinism furthers creative exploration of strategies, while the tool-mediated architecture ensures system stability.

This paper presents a novel model predictive control (MPC) approach for autonomous pick-and-place between moving platforms with a hook-equipped aerial manipulator. First, for accurate and rapid modeling of the complex dynamics, a digital twin model of the quadcopter equipped with a hook-based gripper, implemented in MuJoCo, is constructed and used as the predictive model for the MPC. To handle uncertainties of the predictive model (e.g. due to aerodynamics and uncertain payloads), a robust adaptive MPC approach is proposed. By systematic integration of zero-order robust optimization (zoRO) based uncertainty propagation and an extended Kalman filter (EKF) for parameter estimation, the MPC algorithm ensures robust constraint satisfaction, high performance, and computational efficiency. The effectiveness of the proposed method is evaluated in complex simulated scenarios and in real-world flight experiments.

This paper presents a sensitivity-based tube Nonlinear Model Predictive Control (NMPC) framework for cooperative aerial chains under bounded parametric uncertainty. We consider a planar two-vehicle chain connected by rigid links, modeled with input-rate actuation to enforce slew-rate and magnitude limits on thrust and torque. Robustness to uncertainty in link mass, length, and inertia is achieved by propagating first-order parametric state sensitivities along the horizon and using them to compute online constraint-tightening margins. We robustify an inter-link separation constraint, implemented via a smooth cosine embedding, and thrust-magnitude bounds. The method is implemented in MATLAB and evaluated with boundary-hugging maneuvers and Monte-Carlo uncertainty sampling. Results show improved constraint margins under uncertainty with tracking performance comparable to nominal NMPC.

Tendon-Driven Continuum Robots (TDCRs) pose significant modeling and control challenges due to complex nonlinearities, such as frictional hysteresis and transmission compliance. This paper proposes a differentiable learning framework that integrates high-fidelity dynamics modeling with robust neural control. We develop a GRU-based dynamics model featuring bidirectional multi-channel connectivity and residual prediction to effectively suppress compounding errors during long-horizon auto-regressive prediction. By treating this model as a gradient bridge, an end-to-end neural control policy is optimized through backpropagation, allowing it to implicitly internalize compensation for intricate nonlinearities. Experimental validation on a physical three-section TDCR demonstrates that our framework achieves accurate tracking and superior robustness against unseen payloads, outperforming Jacobian-based methods by eliminating self-excited oscillations. For implementation details and source code, please refer to https://github.com/ZiqingZou/ContinuumControl.

We propose VISION-SLS, a method for nonlinear output-feedback control from high-resolution RGB images which provides robust constraint satisfaction guarantees under calibrated uncertainty bounds despite partial observability, sensor noise, and nonlinear dynamics. To enable scalability while retaining guarantees, we propose: (i) a learned low-dimensional observation map from pretrained visual features with state-dependent error bounds, and (ii) a causal affine time-varying output-feedback policy optimized via System Level Synthesis (SLS). We develop a scalable, novel solver for the resulting nonconvex program that leverages sequential convex programming coupled with efficient Riccati recursions. On two simulated visuomotor tasks (a 4D car and a 10D quadrotor) with >= 512 x 512 pixels and a 59D humanoid task with partial observability, our method enables safe, information-gathering behavior that reduces uncertainty while guaranteeing constraint satisfaction with empirically-calibrated error bounds. We also validate our method on hardware, safely controlling a ground vehicle from onboard images, outperforming baselines in safety rate and solve times. Together, these results show that learned visual abstractions coupled with an efficient solver make SLS-based safe visuomotor output-feedback practical at scale. The code implementation of our method is available at https://github.com/trustworthyrobotics/VISION-SLS.

This paper presents a unified control framework for robust trajectory tracking and moving obstacle avoidance applicable to a broad class of mobile robots. By formulating a generalized kinematic transformation, we convert diverse vehicle dynamics into a strict feedback form, facilitating the design of a Sliding Mode Control (SMC) strategy for precise and robust reference tracking. To ensure operational safety in dynamic environments, the tracking controller is integrated with a Collision Cone Control Barrier Function (C3BF) based safety filter. The proposed architecture guarantees asymptotic tracking in the presence of external disturbances while strictly enforcing collision avoidance constraints. The novelty of this work lies in designing a sliding mode controller for ground robots like the Ackermann drive, which has not been done before. The efficacy and versatility of the approach are validated through numerical simulations and extensive real-world experiments on three distinct platforms: an Ackermann-steered vehicle, a differential drive robot, and a quadrotor drone. Video of the experiments are available at https://youtu.be/dWcxwum96vk

Contact-rich manipulation is central to many everyday human activities, requiring continuous adaptation to contact uncertainty and external disturbances through multi-modal perception, particularly vision and tactile feedback. While imitation learning has shown strong potential for learning complex manipulation behaviors, most existing approaches rely on action chunking, which fundamentally limits their ability to react to unforeseen observations during execution. This limitation becomes especially critical in contact-rich scenarios, where physical uncertainty and high-frequency tactile feedback demand rapid, reactive control. To address this challenge, we propose Tube Diffusion Policy (TDP), a novel reactive visual-tactile policy learning framework that bridges diffusion-based imitation learning with tube-based feedback control. By leveraging the expressive power of generative models, TDP learns an observation-conditioned feedback flow around nominal action chunks, forming an action tube that enables fast and adaptive reactions during execution. We evaluate TDP on the widely used Push-T benchmark and three additional challenging visual-tactile dexterous manipulation tasks. Across all benchmarks, TDP consistently outperforms state-of-the-art imitation learning baselines. Two real-world experiments further validate its robust reactivity under contact uncertainty and external disturbances. Moreover, the step-wise correction mechanism enabled by action tube significantly reduces the required denoising steps, making TDP well suited for real-time, high-frequency feedback control in contact-rich manipulation.

Applying the concept of controlled self-organization in agent-based Cyber-Physical Energy Systems (CPES) is a promising approach to ensure system robustness. By introducing an observer/controller architecture to the system, this concept allows for self-organization while still enabling intervention when disturbances occur. Thus, it is possible to respond to effects of cyber attacks, a major threat to current energy systems. However, when implementing an observer to monitor the system and a controller to execute actions for controlled self-organization in CPES, it is essential to take into account restrictions on information and actions resulting from the privacy of local distributed energy resources, regulatory constraints, and data exchange requirements. For this reason, this paper presents architecture variants for the observer and controller that take into account restrictions on access to information and limited actions. In addition, it evaluates possible controller actions in various architectures. The results underscore the importance of considering observer/controller architectures when designing agent-based systems to ensure their robustness for real-world applications.

Disturbance observer-based control has shown promise in robustifying robotic systems against uncertainties. However, tuning such systems remains challenging due to the strong coupling between controller gains and observer parameters. In this work, we propose MetaTune, a unified framework for joint auto-tuning of feedback controllers and disturbance observers through differentiable closed-loop meta-learning. MetaTune integrates a portable neural policy with physics-informed gradients derived from differentiable system dynamics, enabling adaptive gains across tasks and operating conditions. We develop an adjoint method that efficiently computes the meta-gradients with respect to adaptive gains backward in time to directly minimize the cost-to-go. Compared to existing forward methods, our approach reduces the computational complexity to be linear in the data horizon. On quadrotor control tasks, MetaTune achieves competitive or improved tracking performance while reducing gradient computation time by more than 50%. In PX4-Gazebo hardware-in-the-loop simulation, the learned policy transfers zero-shot and reduces tracking RMSE by about 15--20% in aggressive flight and up to 40% under strong disturbances.

Transferring heavy payloads in maritime settings relies on efficient crane operation, limited by hazardous double-pendulum payload sway. This sway motion is further exacerbated in offshore environments by external perturbations from wind and ocean waves. Manual suppression of these oscillations on an underactuated crane system by human operators is challenging. Existing control methods struggle in such settings, often relying on simplified analytical models, while deep reinforcement learning (RL) approaches tend to generalise poorly to unseen conditions. Deploying a predictive controller onto compute-constrained, highly non-linear physical systems without relying on extensive offline training or complex analytical models remains a significant challenge. Here we show a complete real-time control pipeline centered on the MuJoCo MPC framework that leverages a cross-entropy method planner to evaluate candidate action sequences directly within a physics simulator. By using simulated rollouts, this sampling-based approach successfully reconciles the conflicting objectives of dynamic target tracking and sway damping without relying on complex analytical models. We demonstrate that the controller can run effectively on a resource-constrained embedded hardware, while outperforming traditional PID and RL baselines in counteracting external base perturbations. Furthermore, our system demonstrates robustness even when subjected to unmodeled physical discrepancies like the introduction of a second payload.

Contact-rich micromanipulation in microfluidic flow is challenging because small disturbances can break pushing contact and induce large lateral drift. We study planar cell pushing with a magnetic rolling microrobot that tracks a waypoint-sampled reference curve under time-varying Poiseuille flow in simulation. We propose a hybrid controller that augments a nominal MPC with a learned residual policy trained by SAC. The policy outputs a bounded 2D velocity correction that is contact-gated, so residual actions are applied only during robot-cell contact, preserving reliable approach behavior and stabilizing learning. All methods share the same actuation interface and speed envelope for fair comparisons. Simulation results show improved robustness and tracking accuracy over pure MPC and PID under nonstationary flow, with generalization from a clover training curve to unseen circle and square trajectories. A residual-bound sweep identifies an intermediate correction limit as the best trade-off, which we use in all benchmarks.

Uncertainties and disturbances in robotic systems, such as aerodynamic forces, are fundamentally outcomes of physical interactions with the environment, manifesting as learnable spatiotemporal sequences rather than random noise. However, achieving high-precision control for robotic systems operating in unstructured environments is often hindered by complex unmodeled dynamics and external disturbances. While learning-based methods offer powerful approximation capabilities, they typically suffer from heavy reliance on offline training and lack theoretical guarantees. Conversely, traditional robust control strategies are predominantly reactive, limited to instantaneous estimation without the foresight to anticipate future disturbance trends. To bridge this gap, this paper proposes a differentiable data-enabled Koopman control framework termed DEKC. Unlike black-box approaches, DEKC adopts a hybrid modeling strategy that retains the nominal physics model while employing a deep neural network to parameterize the lifting function of Koopman operator for unknown residual dynamics. Crucially, the framework formulates disturbances as a dynamical system, learning their temporal evolution in a global linear space. This enables the prediction of future disturbance trajectories, which are explicitly integrated into controller for preemptive compensation. Furthermore, an online backward gradient update mechanism is introduced to ensure real-time adaptation to time-varying uncertainties. Numerical simulations on a tethered space robot demonstrate the efficacy of the proposed DEKC in mitigating highly coupled uncertainties. Complementing these results, real-world experiments on a quadrotor substantiate its superiority in tracking agile trajectories under uncertainties induced by aerodynamics and suspended payload.

This paper presents an immersive bilateral teleoperation framework for beyond-human-scale manipulators, combining motion/force transparency with enhanced operator embodiment through virtual reality (VR) and distributed haptic feedback. The platform integrates a full-scale industrial hydraulic manipulator, a 7-DoF haptic exoskeleton, and head-tracked visual feedback to reinforce operator agency and self-location. A force-sensorless adaptive controller incorporates an augmented human-robot dynamic model to address master-surrogate asymmetries, input nonlinearities, model uncertainties, and communication delays. Rigorous analysis establishes semi-global uniform ultimate boundedness of the closed-loop system. Extensive full-scale experiments demonstrate precise motion and force tracking with scaling up to 1:13 and 1:1000, respectively, and fixed or time-varying delays up to 150 ms. Coordinated 6-DoF pick-and-place and multi-axis contact tasks further validate system performance. A ten-participant user study supports system usability and indicates approximately 50% higher normalized embodiment scores with VR than with monitor-based feedback. These results advance intuitive, force-reflected remote manipulation at industrial scale.

Merely pursuing performance may adversely affect safety, while a conservative policy for safe exploration will degrade the performance. How to guarantee both safety and performance in learning-based control problems is an interesting yet challenging issue. This paper aims to enhance system performance with a safety guarantee by solving reinforcement learning (RL)-based optimal control problems for nonlinear systems subject to high-relative-degree state constraints and unknown time-varying disturbance/actuator faults. A new type of control barrier functions (CBFs), termed high-order reciprocal-based control barrier function, is proposed to handle high-relative-degree constraints, which extends the design of CBFs to enforce robust safety without knowing the disturbance bound. The concept of gradient similarity is proposed to quantify the relationship between safety and performance. Finally, gradient manipulation and adaptive mechanisms are introduced in the model-based safe RL framework to enhance the performance with a safety guarantee. Two simulation examples illustrate the efficacy of the proposed algorithms.