Automated Synthesis Techniques

Evaluating live streaming speech synthesis (TTS) requires assessing fine-grained, highly expressive prosody such as emotion, intonation, and energy which traditional MOS predictors fail to capture. While proprietary Large Language Models (LLMs) like Gemini can evaluate these aspects, they are too costly for massive inference and reinforcement learning feedback. To address this, we first introduce Live-ProsodyJudge (LPJ), a cost-effective pairwise evaluator distilled from Gemini into Qwen3-Omni. However, we identify a critical flaw in standard multi-dimensional evaluation: verdict coupling. The judge tends to lazily align all individual dimension scores with its overall preference, collapsing a rich multi-dimensional rubric into a single preference bit. To resolve this, we further propose Decoupled-Live-ProsodyJudge (D-LPJ). D-LPJ eliminates the overall verdict target to prevent blind following, masks uncertain pair-dimensions during Supervised Fine-Tuning(SFT), and introduces a novel span-local GRPO strategy that applies normalized advantages strictly to their corresponding rationale spans. Evaluated on highly curated human-annotated test sets, 10 sample balanced-order LPJ achieves higher point accuracy than a single Gemini call, while D-LPJ successfully produces independent,decoupled dimension judgments. Furthermore, in a Best-of-8 TTS candidate selection tournament, the LPJ-selected utterance falls within the human top-3 in 85.29% of high-confidence cases, demonstrating its efficacy for fine-grained TTS preference optimization.

Self-driving laboratories can explore synthesis conditions autonomously, but their decision-making layer is typically a black-box optimizer, and the output is a set of optimized samples, with the measurements reduced to predefined scalar objectives and the reasons behind success left unarticulated. Here we present SynAgent, a framework in which large language model agents operate an automated experimental system and maintain an explicit, revisable understanding of the synthesis process as the campaign's primary output. Starting with no predefined analysis pipeline, SynAgent adaptively generates analysis skills for newly acquired data and evolves this understanding through multimodal reasoning over experimental data such as X-ray diffraction patterns and electron micrographs. The evolution is guided by a verify-falsify scheme, in which the agent deliberately challenges its own hypotheses by testing conditions predicted to fail as well as those predicted to succeed. In a single campaign of 18 autonomous experiments using LiCoO2 (001) thin-film deposition as a testbed, SynAgent synthesized highly crystalline films and evolved an understanding of how the substrate temperature governs crystallization, discovering an abrupt threshold and a narrow optimal growth window at 650-690 °C. These results extend autonomous experimentation beyond optimized samples to testable, human-readable understanding.

Grasp synthesis aims to generate stable and physically plausible hand--object interactions, and has become a fundamental problem in both human hand modeling and robotic manipulation. However, a unified representation across human and robotic hands is still lacking, mainly due to differences in hand morphology and surface modeling. Prior methods typically rely on either contact maps or dense implicit descriptors to represent interaction, but these representations are often incomplete or computationally expensive and redundant. We propose InterMASH, a unified geometric representation that establishes cross-embodiment correspondence using sphere-fixed anchors. At each anchor, low-degree spherical harmonics compactly encode local hand geometry, object geometry, and contact, forming an explicit and interpretable token sequence. Building on this natively tokenized structure, we introduce a conditional Diffusion Transformer that operates directly in the proposed InterMASH representation space and jointly generates hand geometry and contact, improving consistency and physical plausibility. Our method achieves competitive performance with state-of-the-art methods on key physical feasibility metrics in a large-scale ShadowHand benchmark, supports joint training across multiple hands, and shows that cross-embodiment fine-tuning with human grasp data can improve robotic grasp success and diversity. Project page is available at https://inter-mash.github.io/.

Dexterous grasping is usually conducted for specific tasks, leading to heterogeneous constraints such as specific approach directions, desired contact regions, specified wrist trajectories, and functional hand poses. Our previous work, GraspXL, achieves scalable grasping motion synthesis for diverse objects and hand morphologies, while lacking controllability for synthesis under such various task-driven constraints. In this paper, we propose ConGraspXL, which extends GraspXL with controllable constraint-conditioned grasp motion synthesis that accommodates diverse task-driven constraints and their combinations. We introduce a hierarchical constraint formulation, enable flexible constraint composition with a masked residual interface, and improve control precision with dynamic hand centers and feed-forward wrist guidance. Without losing the strong generalization capabilities of GraspXL, ConGraspXL enables precise and flexible controllability for various individual constraints and their combinations, providing a plug-and-play low-level grasp controller for downstream applications such as whole-body grasp completion, functional grasping, and human-motion imitation.

This paper establishes a perfect-reconstruction (PR) interpretation of AddUNet and its full-rate realization, and introduces a Residual Full-Rate PR architecture for task-directed representation learning. The survivor--skip structure of a constrained additive U-Net is shown to be exactly equivalent to a critically sampled multirate PR filter bank. The full-rate formulation removes the complementary-subband restrictions of the critically sampled system while preserving PR. A Residual Full-Rate PR architecture is then proposed to progressively route task-irrelevant, nuisance, or redundant structure away from the task-facing survivor while retaining the routed information explicitly. Exact reconstruction is guaranteed for arbitrary shape-compatible linear or nonlinear routing operators, without requiring invertibility, a matched synthesis bank, reconstruction loss, or learned decoder. The resulting architecture decouples representation design from reconstruction design: conservation is structural, while learning is devoted to task-directed routing. The same formulation identifies an identity-shortcut ResNet with its residual output retained as a full-rate PR system. Experiments verify exact single-channel routing of linearly separable factors to machine precision. On TIMIT, the proposed front-end improves test PER from $28.60\pm2.09\%$ to $25.76\pm0.41\%$ with the recognizer and training protocol held fixed, while maintaining exact reconstruction. Speaker probing further shows that structural conservation does not itself imply task-specific invariance.

Passive counterweights are simple gravity compensators, but a counterweight selected from a single pose is not generally optimal for the configurations and tasks a manipulator actually executes. This paper develops a task-distribution-aware synthesis framework in which the operating distribution $ρ(q)$ enters the design explicitly. For a counterweight moment $p=m_c r_c$ with gravity torque $-gpφ(q)$, the weighted mean-square residual gravity torque has the closed-form minimizer $p^*=E_ρ[τ_gφ]/(gE_ρ[φ^2])$. If payload gravity torque is affine in payload mass, the optimum is also affine: $p^*(m_p,ρ)=p_0^*(ρ)+m_pK_p(ρ)$. For fixed static moment, added counterweight inertia is $I_c=pr_c$ while mass is $m_c=p/r_c$, so mass-radius selection is underdetermined unless physical constraints are specified. A recovered three-link manipulator is used as a case study. At $r_c=0.20$ m, zero-payload equivalent optima are 0.672 kg for uniform joint-space operation, 0.683 kg for approximately uniform task-space operation, 0.713 kg for a representative pick-and-place family, and 0.952 kg for a high-gravity-biased distribution, a change of more than 40% caused solely by the operating distribution. Nondominated fronts show that preferred mass-radius pairs depend on declared engineering bounds. A rated-torque-referenced all-joint screen increases zero-payload feasible task-space coverage from 78.1% without compensation to 93.7% for the uniform-distribution design. A lumped point-mass trajectory study gives a provisional crossover from no counterweight at very aggressive motion to stronger compensation as motion slows. These actuator and dynamic results are engineering consequence studies rather than physical validation.

Reactive synthesis is a powerful tool for generating correct-by-construction controllers from formal specifications. GR(1) is an assume-guarantee specification framework that enables efficient synthesis, allowing synthesised controllers to be used in a wide array of applications. The limitation of such controllers is that, should they encounter environment behaviour unspecified in the assumptions of the specification, the specified system guarantees are no longer ensured. Our work proposes an approach based on oracle-guided inductive synthesis to adapt the specification to be consistent with the observed assumption violation, while degrading system guarantees as little as possible to maintain realisability. Our methodology discovers multiple potential solutions, so we propose a preference criteria, based on the ability of the specification to enable robustness under adaptation. Although our approach is capable of degrading the entire specification, for our case studies we successfully discover degradations that preserve the entire set of original guarantees.

Autonomous network management requires systems that can evaluate Network Service Intents (NSIs) under varying conditions without manual implementation of analysis logic, as envisioned in TM Forum Level~4 (L4) autonomy. Behavioral Network Digital Twins (NDTs) enable such evaluation, but existing NDTs rely on pre-defined analytical logic, limiting adaptability for evolving closed-loop control. This paper introduces the NDT factory, a multi-agent software system that synthesizes executable behavioral NDTs on demand from semantic models using Large Language Model (LLM). We validate the system using a Call Admission Control (CAC) case study, where deterministic what-if analysis serves as the admission decision process. The NDT factory generates a complete CAC NDT through parallel synthesis and orchestration, achieving 100% compilation and test pass rates across multiple runs. Simulation over 300 NSIs shows 99.3% decision agreement with a reference implementation, 90% admission rate, and correct attribution of all rejections, demonstrating reliable synthesis with deterministic, verifiable execution.

Vision-based crack inspection depends on segmentation networks whose reliability depends on the quantity, diversity and label quality of their training data. Pixel-level annotations are costly, and crack images of specific structures are scarce. Generative augmentation can supply additional data, but existing methods address isolated steps. They reuse annotated masks, offer limited control over crack geometry, and adopt the conditioning mask as the label without checking it. This paper presents an end-to-end pipeline that produces labelled crack data without manual annotation and assesses the reliability of these data and of the detectors trained on them. Procedurally sampled Bézier skeletons with guaranteed geometric properties are converted into crack masks by a generative adversarial network (GAN). A dual-ControlNet Stable Diffusion model renders the masks as crack images, either on text-described surfaces or on user-provided backgrounds. An ensemble of segmentation networks trained on real images combines its agreement with the inherited label and its internal disagreement into a pixel-wise label confidence. This confidence weights the training loss instead of removing samples with a threshold. The trained detectors are evaluated with image-space probability of detection (POD) and calibration analyses. On CRACK500 and CrackTree200, the pipeline improves five segmentation networks over conventional, diffusion-based and flow-matching-based augmentation, and on CRACK500 confidence weighting yields a higher accuracy than threshold filtering at every tested threshold. On CRACK500, the crack width that U-Net detects with 90% probability at 95% confidence decreases from 8.0 to 4.3 pixels, and the expected calibration error decreases from 14.2% to 9.6%.

Quadratic difference tones (QDTs) are a species of auditory distortion product in which a "phantom" pure tone, absent from the acoustic signal, is clearly audible to listeners. Exploiting this phenomenon, one can synthesize harmonically rich tones for musical purposes, a technique called Quadratic Difference Tone Spectrum (QDTS) synthesis. Previous works have introduced numerical methods to synthesize QDTS based on the distortion function, which links a target QDTS and an overtone-structured carrier signal. While accurate, these methods were stochastic and discontinuous, making them difficult to control for musical purposes and effectively limiting them to stationary signals. This paper proposes a neural network-based approach that learns an approximate inverse of the distortion mapping in an autoencoder-like configuration, producing a continuous approximation that addresses prior limitations. Experimental results show that, although slightly less numerically precise, the method is sufficient for perceptual and musical applications. We also implement a real-time version in Max and evaluate its performance. Various sound examples demonstrate its expressive and musical potential. The source code, audio examples, tutorials, and software accompanying this work are available at https://cordutie.github.io/projects/qdts.html

Synthetic relational data is normally produced by a model trained on a real dataset, and its quality is measured as the distance to that dataset. This paper describes a generator that has no real dataset at either end. Given an industry, a company size, a business model, a set of business applications, and a random seed, it produces a complete fictional enterprise: a workforce, a customer base, sales deals, support tickets, recorded calls, chat messages, and documents, all consistent with one another. One entity graph is projected into the native formats of 66 business products, so the same customer appears in the CRM, the support desk, and the call system under one identity. Because no real counterpart exists, realism is built in from cited reference statistics and verified by reference-free measurement: a five-axis scorecard of 28 statistical checks, an adversarial detector that hunts for the marks of synthetic generation, and a set of soundness checks that include a classifier test against an independently shuffled copy of the data. Because these instruments existed before the generator was tuned, progress is measured under a fixed yardstick: over 23 generated companies, mean realism climbed from 60.3 to 99.1, the weakest company from 41.1 to 94.9, and the detector, which initially flagged 55.2% of all records, now flags none. The scores hold on a seed never used during development. A second generator builds relational databases from a list of business questions. It forces qualifying rows for each answerable question, adds controlled near misses, and computes exact labels from the finished tables. The generator runs as a hosted service at https://console.era.eon.io. A company built there to a specification is served through its simulators over MCP and REST, and the simulators are also published as container images for offline use

Bone-selective digitally reconstructed radiograph (DRR) synthesis depends on high-resolution encoder detail, yet static skips cannot condition reuse on the evolving decoder representation. We ask whether decoder state adds useful information beyond encoder-only self-recalibration for high-resolution skip reuse. RFS-UNet uses pooled encoder and aligned decoder statistics for bounded residual channel recalibration at the 512^2 and 256^2 skips, leaving the backbone unchanged. In the matched seed-2026 comparison isolating decoder conditioning, RFS raises validation PSNR by 0.254 dB over Self-RFS. Across three seeds, locked-test PSNR rises from 33.225+/-0.048 to 33.537+/-0.128 dB; RFS lowers MAE in 179/200 held-out CT cases and reduces mean MAE by 3.91%. It adds 0.117% parameters and 1.169% counted Conv2d operations. These results support decoder state as a useful conditioning signal for high-resolution feature reuse in controlled paired projection synthesis.

Synthetic medical time-series generation can alleviate data scarcity and support the development of reliable clinical prediction models. However, existing methods mainly focus on matching the overall distribution and temporal dynamics of real data, which does not necessarily ensure strong downstream utility on imbalanced medical datasets. Clinically informative patterns often occur at heterogeneous temporal scales, while rare minority-class characteristics can be obscured by dominant population patterns. To address these challenges, we propose MedFlow, a class-aware multi-scale flow matching framework for medical time-series synthesis. MedFlow employs a vector-quantized multi-scale tokenizer to represent medical sequences at complementary temporal resolutions, capturing both coarse clinical trends and fine-grained dynamics. We further introduce Token Marginal Guidance, which incorporates class-conditional token statistics directly into the flow matching process to steer generation toward class-specific regions of the learned tokens. This mechanism strengthens minority-class patterns, while preserving the global and tail distributions of real data. Experiments on four public datasets covering electronic health records, EEG, and ECG signals demonstrate that MedFlow consistently outperforms recent state-of-the-art diffusion-based baselines across downstream prediction tasks. On average, it improves AUPRC by 5.8%, reduces Context-FID by 88.6%, and achieves 3.8$\times$ higher sampling throughput.

Predicting storm surge induced by landfalling tropical cyclones is crucial for flood mitigation and coastal risk management. Traditionally, physics-based numerical models simulate storm surge by solving the Navier--Stokes equations using numerical methods, but these simulations are computationally expensive. Generative models are promising for storm surge emulation because they can generate diverse realizations rather than producing a single deterministic prediction. However, their use for storm surge emulation remains largely unexplored. In this paper, we leverage diffusion models for storm surge surrogate modeling, combining a baseline prediction stage with conditional generation to provide a more interpretable modeling framework. We develop SurgeGen, a two-stage generative framework for generating storm surge scenarios conditioned on hypothetical storms with parameters defined in a continuous space. First, a baseline model produces a coarse estimate of the storm surge height. This estimate then conditions a diffusion model, which generates refined storm surge scenarios that better capture spatial patterns and variability. We demonstrate that our approach can generate realistic and diverse storm surge scenarios under conditions both within and outside the training distribution.

Speech systems increasingly infer how an utterance should be delivered from context, but a plausible delivery plan may not be supported by the input. VoxReason is a small public benchmark and verifier for testing this failure before waveform synthesis. Each of its 100 cases fixes the utterance, provides derived records that name the source emotion and intensity, and changes one licensed cue. A system must cite the record for its delivery decision and update only the plan fields associated with the edit. We use deterministic verifier references, not a model leaderboard. This holdout excludes every emotion and intensity combination observed in training. A prior-only predictor achieves 0.958 accuracy across plan fields but never changes its plan consistently after a cue edit. This contrast shows that plan agreement does not demonstrate source grounding. The released suite provides an auditable measurement layer for screening structured speech plans before synthesis. It is limited to derived records, not audio inputs.

Emerging edge AI workloads increasingly require arithmetic units that can trade computational accuracy for efficiency on demand. However, existing approximate arithmetic circuits are typically fixed-accuracy or rely on predefined structures for runtime configurability. This work introduces CircuitsDNA, an evolutionary framework that automatically evolves accuracy-configurable arithmetic circuits supporting multiple accuracy modes within a single circuit. It integrates three key features: 1) multi-threshold verifiability miter to enforce mode-specific accuracy requirements, 2) resource-limited verifiability-driven search to reduce verification overhead without sacrificing correctness, enabling efficient exploration of large circuit design, and 3) feedback-driven adaptive mutation to prioritize effective structural modifications and accelerate search convergence. Experimental results show that the 8-bit multiplier variants synthesized in 28-nm CMOS reduce the area-power product by up to 56% on INT8 DNN workload and 93% under exhaustive activity, compared with an exact 8-bit multiplier. Across CNNs and DeiTs, the accuracy loss relative to FP32 remains below 2% after fine-tuning under worst-case error (WCE) budgets of at most 1%. CircuitsDNA eliminates all search stalls observed in conventional methods across 8/12/16-bit multipliers, while adaptive mutation provides up to 1.33 times faster convergence than its non-adaptive counterpart.

Automated mining of formal specifications is vital for verifying real-time systems. However, existing passive learning approaches remain restricted to deterministic specifications or limited fragments of Timed Regular Expressions (TRE). To our knowledge, this paper presents the first framework to tackle \emph{precise} passive learning for an expressive timed logic, \emph{Metric Interval Temporal Logic} (MITL) without relying on predefined templates or restricted logic fragments. Our approach formally reduces the timed learning problem into a scalable untimed one. By identifying quantitative timing differences between positive and negative traces, we synthesise precise timed constraints and inject them as new Boolean atomic propositions. This embeds timing into the alphabet, delegating the complex formula evaluation to highly optimised, off-the-shelf untimed LTL tools. Crucially, our framework is complete, guaranteeing a separating specification can always be found. We evaluate our implementation across several benchmarks, demonstrating the effectiveness of our approach.

Differentially private (DP) synthesis has been extensively studied for tabular and image data separately, yet many real-world datasets contain images paired with multivariate tabular records. Synthesizing such data is particularly challenging under DP, as the two modalities favor different private learning mechanisms while their dependence must also be preserved. To address this challenge, we propose DP-TabImage, a modality-specialized framework for private paired synthesis. DP-TabImage instantiates the factorization $p(x,y)=p_T(y)p_I(x\;|\;y)$ using a private Probabilistic Graphical Model for the multivariate table distribution and a table-conditioned diffusion model trained with DP-SGD for the conditional image distribution. To facilitate conditional learning under clipped and noisy gradients, we further pretrain the model on private table-image prototypes, pairing privately constructed attribute-conditioned images with tabular vectors derived from the already private tabular model at no additional privacy cost. Experiments on three real-world datasets show that DP-TabImage achieves a strong balance among tabular fidelity, image fidelity, and cross-modal alignment. Our analysis further reveals that visual warm-up primarily improves marginal image fidelity, whereas aligned table-image warm-up is critical for improving cross-modal correspondence. Our source code is available in the GitHub repository, https://github.com/KaiChen9909/TabImage_Syn.

Multimodal Sewing pattern generation aims to infer executable sewing patterns from design cues such as sketches and textual descriptions. As an interpretable and simulation-compatible representation, sewing patterns are particularly valuable for digital garment creation. However, existing methods often model garment specifications as flat long sequences, which entangles garment structure with detailed parameters and leads to redundant components, inaccurate local details, and poor simulation compatibility. In this paper, we present GarmentWeaver, a schema-aware framework for multimodal Sewing pattern generation. GarmentWeaver constructs compact hierarchical targets by activating garment-relevant structural branches and predicts executable Sewing patterns in a structured manner. Specifically, we introduce a schema-aware target construction strategy, build the generator on top of a pretrained vision-language model for multimodal garment understanding, and impose feasibility-aware regularization to encourage structurally valid and simulation-compatible outputs. Extensive experiments show that GarmentWeaver produces more accurate and more executable sewing patterns than strong baselines, while also yielding better simulation results. These findings demonstrate the effectiveness of schema-aware structured generation for reliable multimodal Sewing pattern prediction.

Scientific reasoning remains challenging for open-source models, largely due to the lack of high-quality scientific reasoning data. Existing datasets are often dominated by factual recall or formulaic problem solving, with limited emphasis on mechanism understanding, evidence-grounded reasoning, and hypothesis evaluation. To address this, we introduce SPARK (Scientific Paper Abstracted Reasoning sKeleton), a paper-oriented synthesis framework built on Sci-Base, a large-scale corpus of research papers spanning 10 scientific disciplines. Instead of directly converting papers into question-answer pairs, SPARK treats the claim-evidence-derivation structure of a paper as the fundamental unit of reasoning synthesis. Specifically, SPARK (1) distills each paper into a compact reasoning skeleton capturing its central claims and supporting evidence, enabling self-contained question generation, and (2) synthesizes reasoning tasks from four scientific perspectives: mechanistic reasoning, hypothesis falsification, quantitative derivation, and boundary calibration. A final consistency verification stage further removes unsupported or contradictory outputs. Using this framework, we construct Spark-234K, a scientific reasoning dataset with substantially higher difficulty and diversity than existing resources. Experiments show that Spark-234K consistently outperforms existing scientific reasoning datasets while achieving stronger performance with significantly fewer training samples.

Sharing tabular data in high-stakes domains is constrained by privacy regulations. Synthetic data offer a promising alternative, but deep generative models are costly to train and difficult to audit, while LLM-based methods often serialize records as text, obscuring tabular structure and exposing sensitive data. We introduce Tabular Synthesis Strategy Designer (TabSSD), which uses an LLM to design synthesis procedures rather than directly generate records. TabSSD provides the LLM with tree-derived summaries of variable dependence rather than raw records, which produces Python programs for local execution and evaluation. Across twelve datasets, TabSSD strikes a favourable balance among statistical fidelity, predictive utility, and empirical privacy risk, achieving the best average rank across six metrics among ten methods. Moreover, it substantially reduces local computation and token consumption relative to the compared methods. By enabling human-guided refinement and eliminating user-side model tuning, TabSSD lowers the expertise and infrastructure barriers to transparent tabular data synthesis.

Graph RAG connects facts no single passage states, but implementations pay three times: in infrastructure, keeping vector store, graph database and document store in sync; in quality, because a pipeline that never refuses extractor output stores edges that assert nothing; and over time, because a graph that only accumulates treats superseded and current facts alike. post-graph-rag is an open-source engine addressing all three. Chunks with embeddings, a canonical entity graph and community summaries live in one PostgreSQL database, with pgvector for search and edge tables for traversal. Extraction output is validated before writing: vague predicates, pronominal names and bare quantities are rejected, predicates normalise onto an optional vocabulary, entities resolve to one vertex per canonical name, and denials keep the positive predicate under a negation flag. A bi-temporal layer records when a relation held and when the system believed it, superseding incompatible earlier assertions from document order. Against LightRAG on three corpora with extraction and embedding models fixed, it builds a denser graph everywhere, up to $2.4\times$ the relations per entity, and a more queryable one: 0.46-0.58 distinct edge labels per relation against 0.77-1.33. It supersedes 13 and 8 relationships where the baseline, having no temporal model, supersedes none. On LongMemEval, 500 questions of long-horizon chat memory, it scores 85.8 percent with gemini-3.6-flash against 71.2 for Zep's gpt-4o and 60.2 for a full-context baseline, leading on all six question types. The largest single contribution is temporal grounding in the prompt: carrying each relation's validity period through to synthesis moves temporal reasoning from 0.496 to 0.881, ablated paired on one graph per instance. Code: post-graph-rag https://github.com/crajah/post-graph-rag; post-graph https://github.com/crajah/post-graph

Logic synthesis transforms RTL designs into gate-level netlists, where PPA results are highly sensitive to the choice of optimization commands, making synthesis tuning both high-dimensional and expensive. Previous approaches fall into two categories: automated methods, which perform black-box search over fixed action spaces with limited decision-level interpretability, and LLM-based methods, which typically generate static scripts upfront and cannot adapt to evolving circuit states. We present SynAct, an adaptive closed-loop LLM reasoning--acting agent that iteratively diagnoses live synthesis reports and reasons over the current circuit state, retrieved tool knowledge, and historical optimization experience to issue targeted commands. SynAct focuses on improving timing, particularly worst negative slack (WNS), while maintaining balanced area and power trade-offs. Experiments on a commercial synthesis tool across 14 designs show that SynAct reduces average WNS to 27% of that from bootstrap synthesis.

Videos captured through glass often contain reflections that degrade visual quality and interfere with downstream vision tasks. Although single-image reflection removal has been extensively studied, video reflection removal remains largely underexplored due to the lack of paired video data, temporally coherent removal models, and dedicated evaluation benchmarks. We present a closed-loop framework that unifies physics-grounded reflection simulation, diffusion-based video dereflection, and benchmark evaluation. Our S2R-Synthesis pipeline generates paired reflected and reflection-free videos by performing physics-grounded augmentation in the structure space and rendering realistic reflected videos with a trained video diffusion renderer; the augmentation models key glass-related effects including roughness-induced blur, thickness-induced ghosting, and reflectance variation. Based on the synthesized data, we introduce S2R-Removal, the first diffusion-based video reflection removal model, which adapts a pretrained video diffusion prior through reflection-aware latent adaptation and one-step pixel-geometric refinement, recovering the clean transmission in a single denoising step. We further build S2R-Bench, the first benchmark for video reflection removal, supporting both full-reference evaluation and real-world human perceptual assessment. Experiments on S2R-Bench and multiple public image benchmarks demonstrate state-of-the-art performance and faster inference than even non-diffusion baselines, and validate the effectiveness of S2R-Synthesis. Project page: https://codingwzp.github.io/VideoDereflection_S2R.

Deep learning models that synthesize PET from CT or MRI can reduce patient dose and scanner demand, but are typically optimized with global losses such as L1 or mean squared error (MSE) that treat all voxels similarly. In whole-body PSMA-PET, tumor voxels occupy only a small fraction of the volume, yet carry the clinically relevant activity signal; as a result, models can achieve high structural similarity index measure (SSIM) and peak signal-to-noise ratio (PSNR) while still underestimating lesion activity or failing to preserve tumor-specific structure. Radiomics provides biologically meaningful descriptors of tumor intensity and texture, but direct radiomics conditioning is time-consuming because it requires feature extraction from delineated lesion regions. We propose LAFNO, a Lesion-Aware Adaptive Fourier Neural Operator for CT-to-PSMA-PET synthesis that replaces high-dimensional radiomics conditioning with two efficient CT-derived proxy channels. Motivated by radiomics analysis of PSMA-avid tumor core and peritumoral regions, LAFNO uses a contrast proxy for local density variation and a disorder proxy for local texture heterogeneity, both injected into the model bottleneck. LAFNO combines whole-volume reconstruction with lesion-level total lesion activity (TLA), tumor-core contrast, and peritumoral supervision. We evaluated LAFNO against four baseline architectures on the TCIA PSMA-PET-CT-Lesions dataset. LAFNO remained competitive on whole-volume image quality, achieving SSIM of 0.960 and 0.938 for 18F- and 68Ga-PSMA, respectively, while reducing per-patient TLA error to 48.3% and 64.0% for 18F- and 68Ga-PSMA, respectively, and achieving the highest tumor-core radiomics reproducibility across all feature classes for both tracers. Peritumoral reproducibility remained tracer-dependent, indicating that biological fidelity in synthetic PSMA-PET remains challenging.

As an important subfield of cross-modal generation, synthesizing static visual content in the form of images from audio, namely audio-to-image (A2I) generation, has attracted increasing research attention in recent years. Nevertheless, despite the remarkable visual quality of modern text-to-image (T2I) models, the performance of A2I remains fundamentally limited by traditional datasets, which often lack both high-fidelity images and precise cross-modal alignment. As a result, existing methods still struggle to achieve high-quality audio-to-image generation through finetuning strong T2I models, thereby constraining practical applications in this area. Motivated by this gap, we introduce A2I-Set, a unified, high-quality tri-modal dataset consisting of 323K paired audio, images, and detailed text captions, specifically designed for audio-visual research, including audio-conditioned image generation. Besides, we developed a new mixed-source test set for the A2I task through human supervision. We further propose an A2I model, AudioCanvas, fine-tuned on our A2I-Set. Experiments show that AudioCanvas achieves more visually expressive as well as cross-modal alignment results that generally outperforming existing approaches. Our dataset and source code are available at https://github.com/gdx012/A2I-Generation.

Zero-shot text-to-speech (TTS) now supports interactive assistants, personalized media, and accessibility tools. All TTS systems require faithful linguistic rendering, consistent speaker identity, and low-latency response. Yet compact streaming systems must preserve sufficient acoustic detail in a predictable low-rate latent sequence, while iterative diffusion sampling and classifier-free guidance multiply inference cost at every autoregressive step. To strike a balance between high-fidelity synthesis and low-latency inference, we present CuteTTS, a compact continuous-autoregressive TTS system. It combines semantically aligned causal VAE latents with patch-level autoregression, explicit speaker conditioning, and a bidirectional flow-matching head. We further introduce guidance-step distillation, which absorbs classifier-free guidance and multiple solver steps into a single interval-conditioned student. Evaluations on LibriSpeech and Seed-TTS-Eval demonstrate competitive intelligibility and speaker similarity in zero-shot voice cloning, while distillation lowers first-audio latency by 23.3% and real-time factor by 40.8% relative to the base model with comparable objective and subjective quality. These results provide a practical path toward continuous-autoregressive TTS that reconciles high-fidelity generation with the latency demands of real-time interaction.

Recent Text-To-Speech (TTS) systems have achieved strong naturalness and zero-shot voice cloning performance, but fine-grained control of expressive speech at the word or phoneme level remains challenging. We propose CtrlSpeech, a controllable, expressive TTS framework with coarse-to-fine control. Built on the DiTAR architecture, CtrlSpeech combines global speaker conditioning with phone-aligned pitch, loudness, and duration signals, enabling localized prosodic control while preserving the target speaker's timbre. This design allows users to adjust expressive attributes at a fine temporal granularity, making speech refinement more flexible and controllable. Experimental results show that CtrlSpeech achieves competitive zero-shot TTS performance and improves controllability over expressive attributes, demonstrating its effectiveness for flexible and practical expressive speech synthesis.

Motion deblurring has achieved remarkable progress with deep learning, yet pre-trained deblurring models often suffer from performance degradation in real-world scenarios due to the domain shift between training and testing distributions. To remedy this, we propose EvBS, an event-guided blur synthesis framework that generates diverse training pairs for calibrating pre-trained models to the target domain. While existing methods are constrained by the inherent entanglement between motion and visual content, our method leverages the high temporal resolution of event cameras to effectively decouple them. This enables us to utilize not only the intrinsic motion that is inherent to the given content but also extrinsic motion transferred from different sources within the target domain, thereby facilitating effective adaptation via fine-tuning. Specifically, EvBS comprises two complementary strategies: Intrinsic-Blur Synthesis, which blurs sharp contents with their own motion patterns, and Extrinsic-Blur Synthesis, which transfers motion from blurry patches to distinct sharp content. This approach generates a diverse set of training pairs that break the inherent constraints of naturally coupled motion and content, resulting in enhanced domain-adaptive deblurring performance. Extensive experiments on multiple benchmarks demonstrate that EvBS effectively enhances the robustness of existing deblurring models on unseen testing datasets.

Neural synthesis for musical instruments has the potential to revolutionize current practices that use concatenative synthesis and a sample library. However, most research focused on piano synthesis and expressive performance generation; little work has been done on continuously articulated instruments like the violin, let alone rendering them with playing techniques and dynamics. We present VIOLET, a latent-diffusion framework for controllable violin synthesis, which uses a Diffusion Transformer (DiT) with rectified flow to synthesize high-fidelity audio from MIDI notes, playing techniques, and continuous dynamics. To train VIOLET, in addition to using a few existing datasets, we curate a new dataset named CSV-TD, which contains 39 h of 48 kHz synthetic audio and time-aligned annotations of MIDI notes, note-level techniques, and continuous dynamics curves. Objective and subjective evaluations show that VIOLET synthesizes violin performances with high technique adherence, accurate pitch and timing alignment, and good dynamics control. It outperforms the current state-of-the-art neural violin synthesis system and approaches a top commercial virtual instrument in terms of technique clarity, naturalness, and dynamics following.

The total synthesis of a complex molecule is among the most demanding intellectual and experimental feats in chemistry: a chemist must plan many steps ahead for how to assemble simple building blocks into an intricate target, devise backup strategies, and anticipate procedural challenges. It is also a profoundly creative activity. For half a century, efforts to automate the retrosynthetic design of natural products and other complex molecules have drawn on catalogued reactions, and the resulting tools now report near-complete success on benchmarks built from that same source. But these tools were shaped to fit benchmarked chemistry, and they falter on many natural products, the frontier of the field, whose densely functionalized, polycyclic architectures demand precisely the inventive chemistry the record contains least. Whether a machine could reasonably design such syntheses like an expert chemist does has remained unclear. Here, we show that SynthEx, an agentic framework built on large language models, plans routes to complex natural products that lie beyond the reach of conventional design algorithms. SynthEx proposes competing strategies, assembles a sequence of routine and key steps into a cohesive route, and critiques and improves its own design; the chemistry it favours is more convergent than existing tools produce, and spans a region of reaction space that catalogue-based tools cannot match. Most notably, in blinded assessments, expert chemists judged its key steps comparable to those of published human syntheses and engaged with them as genuine synthesis plans, a response algorithmic route prediction has not previously accomplished. We release routes to more than a thousand natural products as SynthAtlas, an open, interactive database, and anticipate it will become a shared resource for a collection of complex target molecules that lack existing literature routes.

Recent text-to-video (T2V) generation models enable fake news videos to be synthesized from scratch, shifting the threat beyond cheap fakes assembled from existing footage. Such news videos can closely match fabricated narratives, creating a modality alignment trap for existing detectors. Existing datasets lack pure synthesis fake news videos. Although directly prompting T2V models with descriptions of fake news videos can yield perfectly aligned samples, it reduces the fake news video detection (FNVD) to unimodal shortcuts and causes semantic-visual degeneration. To counter this, we formulate T2V-FNVD as a novel ternary classification task with three labels (real, cheap fake, and pure synthesis fake) and construct the first pure synthesis fake news video dataset (PS-FNVD). PS-FNVD includes fabricated events with aligned deception (Type 1) and true events with false visual provenance (Type 2), preventing models from exploiting unimodal shortcuts. Furthermore, we propose the Reasoning-guided T2V-FNVD (R-T2V) framework. Trained through conditioned rationale generation and supervised fine-tuning, R-T2V integrates high-level semantic logic with low-level physical generative traces to predict the ternary veracity label. Extensive experiments across 10 prevailing baselines show that R-T2V achieves the state-of-the-art performance, outperforming the second-best baseline by 12.20 percentage points in accuracy and 8.46 percentage points in macro $F_1$.

High-quality long-horizon training data for terminal agents is expensive to produce, often costing hundreds to thousands of dollars per task, because each task must keep the instruction, environment, reference solution, and verifier mutually consistent. Human authoring does not scale, and direct generation with large language models (LLMs) often breaks these dependencies. We present Recursive Synthetic Terminal Tasks (RST), a recursive verified synthesis framework for constructing long-horizon terminal-agent tasks at scale. Starting from verified seed tasks, RST extends the reference solution, realigns the verifier and instruction to the new workflow, validates the result in a fresh sandbox, and reuses accepted tasks as seeds for subsequent rounds. Across fifteen recursive rounds, RST produces 37,484 synthesized terminal-agent tasks at roughly $0.05 per task. Task difficulty increases substantially over rounds: the median reference solution grows from 67 to 374 lines, the median number of executed commands grows from 40 to 244, and DeepSeek-V4-Pro pass@4 drops from 90% at R1 to 2.5% at R15. To demonstrate training utility, we collect rejection-sampled Qwen3.5 trajectories on the synthesized tasks and use them for supervised fine-tuning. Fine-tuning on these trajectories improves Qwen3.5-27B and Qwen3.5-122B-A10B by up to 10 points on Terminal-Bench 2, Terminal-Bench Hard, and Long-Horizon Terminal Bench, while agentic PPO lifts Qwen3.5-27B to 49.44%, 32.00%, and 22.07% on the three benchmarks, corresponding to relative gains of 20.0%, 41.2%, and 21.9% over the base model. Moreover, after 15 rounds, the recursion shows no ceiling: synthesis yield and validation rates remain stable as difficulty keeps climbing, indicating that the process can continue well beyond the scale reported here.

Real-world multimodal instructions often bundle multiple requirements with unequal importance, yet most multimodal training data still reduce instruction following to answering one self-contained question. We study this gap through rubric comprehension, which casts the model not as a generator measured against rubrics but as an executor that follows them: given an image and a typed, prioritized rubric, the model must verify each rule before producing an overall judgment. To support this setting, we propose PRISM, a four-stage data synthesis framework that produces persona--task pairs, prefix-guided rule sets, quality-filtered rubrics, and structured verification traces. We further introduce PRISM-Eval, whose Loose and Strict metrics use deterministic matching against fixed labels and therefore require no inference-time judge model. With only 10K synthesized samples, PRISM lifts Qwen3-VL-4B from 9.5% to 30.1% Strict accuracy on PRISM-Eval while preserving average performance on general benchmarks, and the gains transfer to four additional open-source MLLMs across dense and MoE architectures, suggesting that structured rubric supervision is a scalable path toward multi-rule, priority-aware multimodal instruction following.

AI co-scientists can generate fluent materials-science hypotheses, but fluency does not show that an answer preserves a scientifically meaningful mechanism. We present a graph-to-answer mechanism-tracing case study for Graph-PRefLexOR-8B, a Qwen3-8B model adapted to expose distinct stages for brainstorming, graph construction, pattern extraction, and synthesis. We organize semantic backtracking, graph corruption, activation-based recovery measurements, and layer-by-token-region grids into a visual diagnostic workflow for inspecting this pathway. Across 100 open-ended materials-science questions, final answers remain closest to the model's own structured stages, especially synthesis. Under graph corruption, a full sweep over 37 residual-stream checkpoints, the embedding output and 36 transformer blocks, shows little mechanism recovery in the earlier transition region at layers 7--10, recovery instead concentrates in late synthesis and answer-start regions around layers 30 and 36. The workflow is intended to help scientists and model developers identify where a generated hypothesis loses or regains mechanism support before it is passed to downstream experimental planning.

Decomposition-based Programming-by-example (PBE) scales performance by splitting tasks into subtasks that a learned synthesizer solves: a decomposer predicts intermediate subgoals, and a synthesizer generates programs conditioned on them. Current approaches train the decomposer to imitate ground-truth ( GT) subgoals, implicitly treating decomposition quality as intrinsic to the task. We challenge this assumption: for bounded solvers with fixed inductive biases, GT decompositions reflect the annotator's factorization choices - not the solver's search dynamics. A decomposer trained to match GT decompositions may therefore propose subgoals that are logically valid yet intractable for the solver. We propose Solver-Aware Decomposition (SAD), a training framework that retains supervised training on GT subgoals as a structural scaffold, while additionally optimizing the decomposer via direct feedback from a frozen synthesizer. Subgoals are rewarded based on the synthesizer's loss on the target program - a signal of subtask difficulty that encourages decompositions the solver can act on. Our experiments reveal an accuracy paradox: higher agreement with GT decompositions does not improve synthesis success - even though the synthesizer was trained on the very same GT data the decomposer is optimized to mimic. SAD instead learns decompositions that trade GT alignment for solver tractability, yielding consistent gains in synthesis and end-to-end task accuracy across two PBE domains. Moreover, SAD solves tasks that a GT decomposition oracle fails - empirical evidence that GT decompositions are not universally optimal for bounded solvers, and that decomposition quality is solver-relative, not intrinsic.

Linear Temporal Logic (LTL) is one of the most widely adopted languages for specifying temporal extended objectives in AI, with applications ranging from reactive synthesis to stochastic planning in Markov decision processes and reinforcement learning. Traditionally, solving any of these problems requires translating the LTL specification to a nondeterministic automata on infinite words and then determinizing it, a step that is notoriously difficult in theory and in practice. Recent work has introduced LTLf+, which lifts the finite-trace logic LTLf to infinite traces. LTLf+ has the same expressive power as LTL, yet it retains most of the crucial advantages of its base logic LTLf. Most reasoning in LTLf+ rests on finite automata on finite words, for which we have not only a canonical minimal representation but also an efficient determinization procedure. In this work we present the first translation from LTL to LTLf+. We first normalize an LTL formula into the syntactic reactivity fragment of the Manna-Pnueli hierarchy, to create the general fragment-based shape of LTLf+. We then present linear translations for each individual component of that fragment. As a consequence of this translation, the expanding body of techniques developed for LTLf+ now becomes available to many AI problems currently formulated in LTL. We further show that this comes at no asymptotic cost, as the pipeline from LTL to automaton via LTLf+ remains doubly exponential.

Single-image feed-forward 3D Gaussian Splatting (3DGS) aims to directly generate a renderable 3D scene representation from one input image, avoiding the cost of multi-view capture and per-scene optimization. However, existing methods are often constrained by a pixel-aligned representation, where Gaussians are predicted from fixed image-grid locations. Such pixel-aligned primitives can produce promising nearby-view renderings, but they remain weakly coupled to underlying scene surfaces and struggle to preserve coherent structures under large viewpoint shifts. We present InfiniSplat, a feed-forward single-image 3DGS framework that moves from a pixel-aligned representation toward a surface-aligned representation. InfiniSplat constructs this representation by first using geometry-guided sampling to place 2D supports according to depth-induced local surface structure, and then applying a query-conditioned implicit decoder to predict Gaussian attributes from the image features queried at these supports. By grounding support locations in geometry while decoupling Gaussian prediction from fixed pixel centers, InfiniSplat produces Gaussian layouts that better follow scene surfaces and reduce scattered primitives caused by grid discretization. Across multiple cross-dataset NVS evaluations, InfiniSplat achieves state-of-the-art performance compared with single-image feed-forward baselines, and demonstrates zero-shot generalization from Hypersim indoor synthetic training to complex open-world scenes. Project page: https://zju3dv.github.io/InfiniSplat.

In this paper, we consider the parameter synthesis and optimization problem for parametric Markov decision processes (pMDPs), the extension of classical MDPs where exact probability values are replaced by parametric expressions. Computing the rational function $f_{\lsf}$ that maps parameter valuations to the satisfaction value of a PRCTL property $\lsf$ is a computationally expensive task, particularly for pMDPs where the optimal policy may vary across the parameter space. We adopt the \emph{scenario approach} to efficiently synthesize a probably approximately correct (PAC) approximation $\ApproxFunOfProperty{f}$ of $f_{\lsf}$: by sampling parameter configurations and solving a linear program, we obtain a polynomial approximation whose error margin $\margin$ is guaranteed, with prescribed confidence, for all but an $\errorRate$-fraction of the parameter domain under the sampling distribution. We further show how this PAC framework can be combined with statistical model checking (SMC), enabling the analysis of black-box parametric models. Building on the PAC approximation, we integrate the DIRECT (DIviding RECTangles) algorithm for derivative-free global optimization over the parameter space. We establish conditional optimality-gap guarantees: under explicit Lipschitz and PAC-good-set assumptions, the difference between the true optimum $f_{\lsf}(\parameters^{*})$ and the value found by DIRECT is bounded by a partition-diameter term and, in the PAC case, an additional approximation-error term. An empirical evaluation on 2997 benchmarks focuses on the new DIRECT-based optimization component. The results show that DIRECT variants solve fewer instances than the scenario optimizer, but on their common successful instances they often return slightly better objective values and usually run faster, while remaining close to the scenario values within the PAC margin.

Existing rainfall simulation methods for autonomous driving remain limited in physical controllability and multi-view consistency. This paper presents GSRAIN, a high-/low-frequency rainfall synthesis method for 3D Gaussian Splatting (3DGS) driving scenes. GSRAIN constructs a high-frequency raindrop model from measured rainfall data and generates low-frequency rainy appearance using a geometry-aware single-step diffusion model. The two effects are then fused in a unified 3DGS scene, enabling rainfall-intensity control over the range of 0--13~mm/h. The proposed method achieves a Fréchet Inception Distance (FID) of 149.09, outperforming CycleGAN-Turbo (155.71) and WeatherEdit (157.94). Object-detection and closed-loop driving experiments further show that the generated scenes expose scene-dependent performance changes of the evaluated algorithms under controllable rainfall. These results indicate that GSRAIN provides an effective approach for constructing physically controllable, repeatable, and closed-loop-compatible rainy-weather test scenes for autonomous driving.

Large Language Models have enabled increasingly capable autonomous agents, yet personalization remains critical for making such agents practically useful. Recent benchmarks have begun evaluating personalization in agents, but they largely rely on static preference snapshots, fixed interaction logs, or question answering over predefined user profiles. Such designs fail to capture the complexity of evolving user preferences and neglect preference-conditioned task execution-a discrepancy we term as the knowledge-to-action gap. To address this challenge, we introduce IBA-Bench, a benchmark for implicit behavioral alignment constructed from longitudinal interaction histories that contain noise, implicit cues, and temporal inconsistencies. Unlike prior work, IBA-Bench evaluates whether an agent can execute tasks while satisfying implicit user constraints inferred from historical interactions. We further propose IBA-Agent, an agent framework that reconciles conflicting priorities through broad retrieval and trajectory-level alignment. Experiment results on IBA-Bench show that effective personalization remains a significant challenge for state-of-the-art LLM agents, and the proposed IBA-Agent substantially improves behavioral alignment in complex scenarios across nine application domains.

Model checkpoints are growing in both number and size, which makes archival, transfer, and deployment increasingly costly. General-purpose compressors can reduce storage requirements but ignore tensor structure, whereas existing tensor-specific compressors rely on fixed and format-specific pipelines. We present Brevis, which formulates lossless tensor compression as program synthesis. We design a typed domain-specific language (DSL) that captures recurring tensor structures, such as repeated regions and floating-point fields, through a set of reversible operators. Given a tensor, Brevis synthesizes a self-contained DSL program that reconstructs it bit-exactly. A checkpoint-specific production prior, learned from a small representative sample of tensors, guides a bounded A* search to synthesize compact programs, which can later be executed directly for bit-exact decompression. On 10 public checkpoints spanning language, audio, and image generation models, Brevis reduces 2.13 TB of checkpoint data to 1.41 TB, a 33.93% storage reduction. It produces archives up to 30.87% smaller than those of four general-purpose compressors, including zstd and gzip, and smaller archives than the tensor-specific compressors ZipNN and DFloat11. Under a practical concurrency configuration, Brevis achieves 3.60 GB/s compression and 6.61 GB/s decompression while preserving every source byte.

Existing indoor layout generators produce globally plausible layouts yet may retain local violations such as collisions, out-of-bounds placements, obstructed openings, and blocked circulation. Most prior work focuses on full-scene synthesis or scene-level optimization, with limited support for identifying responsible objects and locally repairing affected regions. We present Roomer, a reflective repair framework that casts these violations as sparse, object-grounded repair problems. Roomer encodes layouts as RoState'' and uses RoReview'' to bind measured violations to implicated objects. A geometry-conditioned vision-language model planner proposes a structured local edit, while a deterministic solver validates it and generates a finite set of candidate edits when needed. Each candidate is committed only if full-scene verification confirms that it resolves the target violation without new hard violations or broken protected constraints. We train the planner on Roomer-CC, a controlled-corruption dataset that pairs faulty layouts with object-grounded violation evidence and known-feasible inverse StatePatches. Since existing benchmarks rarely assess whether physically valid layouts are usable, we introduce Roomer-Eval to assess distributional quality, physical validity, and practical usability. Experiments show that Roomer repairs residual violations while preserving valid regions, improves physical validity and usability, and transfers across external generators.

Recent image generators can synthesize convincing human-centric images, yet producing a useful collection remains different from producing a single successful image. A human-centric dataset must cover varied people and contexts, avoid implausible attribute combinations, preserve an everyday photographic character, and expose quality-control decisions at scale. We present Poplar, a reproducible Specify--Render--Inspect pipeline for human-centric image dataset synthesis. Specify samples structured attributes under commonsense constraints and verbalizes them as photography-oriented prompts. Render uses a realism-adapted image generator across composition-aware aspect ratios and retries obvious technical failures. Inspect applies a single structured vision--language review to each candidate, preserving the original prompt while rejecting intrinsic image defects or material prompt mismatches. Using Poplar, we construct Poplar-9K: 9,401 curated human-centric image--text pairs retained from 11,765 reviewed candidates (79.9% acceptance). We release the dataset together with the pipeline, configurations, immutable generation prompts, and auditable inspection records as a compact resource for building customizable human-centric collections.

Polymers synthesized via ring-opening polymerization (ROP) of cyclic monomers represent an important class of materials due to their chemical recyclability and possible insertion in several critical applications. We present a dataset of 1 million synthetically realizable ROP polymer structures generated through a combination of Virtual Forward Synthesis (VFS) and polymer expert language models and qualified by stringent chemical heuristics. VFS is used to generate ROP polymers by applying known reactions to existing monomers. The polymer foundation models polyBART and POLYT5 further enable the generation of ROP candidates, with polyBART exploring its learned latent space and POLYT5 producing candidates via sequence-to-sequence generation. The resulting ROP polymers are subjected to robust filtering criteria to ensure novelty, validity and overall data quality through a combination of automated validation pipelines and a comprehensive set of chemist-informed heuristic rules introduced in this work for the first time. We hope that this dataset will serve as a valuable resource for downstream sustainable applications.

Training large language models (LLMs) to write register-transfer level (RTL) requires large corpora of paired specifications and code, and such data is scarce enough that most public corpora are now synthesized. Synthesis provides scale but not correctness, and in two widely used RTL datasets only 24.4% and 53.5% of pairs pass generated functional tests. This raises the question of how much of such a corpus to keep and which part of it. Correctness alone is a poor answer. A pair that misbehaves in one corner case still shows valid syntax and interface conventions, and complex sequential designs are both harder to generate and harder to validate, so filtering by correctness leaves a corpus of short and simple modules. Correctness is also hard to obtain, since behavior leaves little trace on the surface in RTL, and validating an entire corpus only sorts pairs into passed and failed. We present RTLCurator, which learns a behavior-aware compatibility prior by contrasting each specification with implementations that fail simulation, and calibrates it to a new corpus using a small number of validated pairs. It then constructs the retained subset by balancing alignment, representation coverage, and RTL structural richness. On CodeV and RTLCoder, keeping 80% of the corpus this way improves on training with the full corpus across all reported metrics while validating only 10% of the pool, whereas ranking by the score alone falls below random selection and filtering the whole pool by simulation does no better.

Chemistry literature synthesis often requires assembling specific findings scattered across many publications, yet existing literature-search systems primarily return ranked document lists. As a result, scientists and AI agents need to locate relevant information, verify their provenance, and assemble cross-paper answers manually. We present AskChem, a claim-centered infrastructure for cross-paper chemistry search. AskChem changes the unit of retrieval from the paper to the provenance-carrying claim: each paper is converted into atomic, typed claims, each grounded by a source DOI and a verbatim quote or an explicit evidence locator. Over this shared claim store, AskChem exposes complementary structures for search and synthesis: a stabilized faceted taxonomy for hierarchical retrieval and browsing, an evidence graph linking claims through relations, and an exploratory living taxonomy that situates indexed papers under scientific principles. AskChem currently indexes 2.4M claims from 147K papers and provides a web interface, as well as REST, SDK, and MCP access for AI agents. On AskChem-Bench, grounding a GPT-5.5 reader in AskChem yields 100% resolvable DOIs, compared with 88.3% without retrieval, and the highest citation density among five tested systems. AskChem is live at https://askchem.org.

Microservice architectures have become dominant for modernizing monolithic systems, yet identifying appropriate services remains challenging and largely manual. Existing decomposition approaches are predominantly code-centric, limiting applicability in early design stages where only textual requirements are available. Despite advances in Large Language Models (LLMs), limited empirical evidence exists on their ability to synthesize complete microservice architectures from natural-language requirements, including service definitions and inter-service interactions. This study investigates whether an LLM can bridge requirements engineering and architectural design, generating architectures solely from textual requirements and evaluating structural agreement and perceived quality of results. We conduct a mixed-method study using OpenAI o3 under zero-shot (ZS) and few-shot (FS) prompting across two systems (Bookstore, PetClinic), one execution per system/condition. Architectures are evaluated through (i) comparison with reference architectures using precision, recall, and F1-score for service identification and communication recovery, and (ii) a blinded expert assessment of correctness, completeness, modularity, and plausibility, plus open feedback synthesis. OpenAI o3 identifies services with higher agreement under FS prompting (F1 = 0.79 for ZS versus = 0.97 for FS). Communication recovery is more challenging: ZS produces dense architectures with high recall but low precision (F1 = 0.61), while FS improves agreement, reaching F1 = 0.82 and reducing unsupported dependencies. Expert evaluation corroborates these results, with FS architectures perceived as more modular, coherent, and plausible than ZS outputs. OpenAI o3 shows potential for requirements-driven synthesis when guided by exemplar prompting. Results are model- and context-specific from two small systems, not model-independent proof.

Many dexterous manipulation tasks require the object to remain securely held throughout the interaction. From the perspective of hand-object relational motion, such manipulation comprises four canonical skills: grasping, relocation, in-hand rotation, and in-hand translation. Human hands flexibly compose these skills to accomplish complex tasks. Existing approaches, however, model these skills separately with skill-specific action constraints, objectives, or even dedicated hand morphologies, which breaks the compatibility and continuity required for long-horizon composition. In this work, we present a unified framework that models all four skills in a single formulation that shares the same state and action spaces and a common objective structure. This formulation enables straightforward distillation of a single cross-skill policy that performs strongly on every skill, generalizes to unseen objects, stays robust to disturbances, and chains skills seamlessly into long-horizon manipulation. The framework also transfers effectively across different hand morphologies. Overall, our results suggest that different dexterous manipulation skills can be viewed as instantiations of a shared task formulation, revealing the intrinsic consistency across different behaviors.

High-quality, diverse data are vital for large language models (LLMs) but remain scarce and costly. Data synthesis is a viable alternative and succeeds on closed tasks, yet the humanities and social sciences (HSS) are overlooked, and their open-ended nature makes synthesis challenging. Moving beyond prior capability-centric, fragmented attempts, we adopt a subject-centric paradigm, define the first HSS domain system covering 14 mainstream fields, and introduce HSS-Synth, the first data synthesis pipeline for HSS. HSS-Synth comprises: (1) constructing seed documents from web corpora via multi-step filtering and text refinement evaluated by a judge; (2) specifying "requirements + persona" to backtranslate seed documents into diverse yet faithful instructions with a strict Q&A alignment check; and (3) breaking LLM response limits via teacher-forced Answering that feeds seed documents during response generation to anchor semantics, reduce hallucinations, and preserve tone and integrity. HSS-Synth yields 237k high-quality, diverse instruction-tuning samples that outperform 14 leading baselines on 16 benchmarks. The fine-tuned Qwen3-8B-Base sets a new SOTA and approaches the official Qwen3-8B, improving both human preference and knowledge capabilities without performance seesaws. Extensive experiments demonstrate HSS-Synth's robustness and transferability. Our code is publicly available at https://github.com/pengr/HSS-Synth.

LLM-based agents excel at software engineering tasks where an existing codebase provides context, but constructing a program from scratch remains fundamentally harder. Recent benchmarks such as ProgramBench quantify this gap: given only natural-language documentation and an execute-only binary as a behavioral oracle, even frontier models solve fewer than 1% of instances. Existing frameworks conflate documentation reading, behavioral exploration, and code synthesis into a single pass, causing agents to probe insufficiently, lose behavioral intent as context drifts, and propagate early misinterpretations into the final implementation. Inspired by classical requirements engineering, we argue that behavioral specification elicitation should be a first-class phase that precedes implementation. We present SpecFirst, a two-stage framework that forces the specification elicitation before code synthesis. A dedicated spec agent first probes the binary and combines observations with documentation into a structured specification. Next, a code synthesis agent then uses this specification to drive implementation. This decomposition resolves documentation ambiguities before coding begins and provides a stable behavioral reference throughout synthesis. We evaluate SpecFirst on all 200 ProgramBench instances across four models spanning two families and an order of magnitude of capability. SpecFirst consistently outperforms the single-loop baseline, improving test pass rates by 6.9%-21.3% and binary exploration coverage by 9.4%-18.5%, all statistically significant. Behavioral analysis on code synthesis further shows that a prior specification enables earlier and more sustained code construction. Our results demonstrate that an explicit requirements-engineering phase is an effective paradigm for from-scratch program construction.

Classical grasp quality metrics assume one deterministic friction coefficient and therefore cannot assess whether a grasp maintains force closure across plausible friction values. We present FIRMGrasp, a family of grasp quality metrics that incorporates friction uncertainty through Conditional Value-at-Risk (CVaR). At confidence level $β$, we evaluate the force-closure margin at the mean of the adverse friction tail. This evaluation defines the risk-adjusted margin $\varepsilon^{(β)}$, the inscribed-ball radius of the corresponding grasp wrench space. We prove that $\varepsilon^{(β)}$ varies monotonically with $β$, remains differentiable in the grasp parameters, and certifies that any grasp with $\varepsilon^{(β)} > 0$ achieves force closure with probability at least $β$. Across 1,599 LEAP Hand and Allegro Hand grasps, $\varepsilon^{(β)}$ identifies friction-sensitive grasps that receive high nominal Ferrari-Canny scores, and 53% of the nominally force-closed grasps lose closure in the adverse friction tail. The nominal margin ranks a successful grasp above a failed grasp with probabilities of only 0.53 in the shake test and 0.67 in the pick test, whereas $\varepsilon^{(β)}$ achieves 0.63 and 0.78. At an adverse friction coefficient of 0.2, 70% of grasps with positive $\varepsilon^{(β)}$ withstand a simulated lift and lateral pull, compared with 25% of grasps with positive nominal margin and nonpositive $\varepsilon^{(β)}$. We also synthesize grasps with positive $\varepsilon^{(β)}$ for the RealHand L6 and LEAP Hand, both of which retain the object during adverse-friction lifts. In MuJoCo trials with the RealHand L6, 95% of grasps that establish contact and have positive $\varepsilon^{(β)}$ retain the object at the same adverse friction coefficient.

We introduce MicroZoom, a generative framework for gigapixel image synthesis at the microscopic scale. Given a standard photograph and a sparse set of consumer-grade microscope close-ups, MicroZoom synthesizes a seamless, gigapixel-resolution image grounded in the material character of the real references, enabling exploratory visualization of microscopic texture across the full spatial extent of an object. Our goal is plausible synthesis, not exact reconstruction. We focus on full-image, reference-based, extreme-scale super-resolution at magnification levels of up to 350x, a setting that introduces two major challenges: (1) recovering texture-specific detail from highly lossy inputs near ambiguous material boundaries, and (2) preserving correct large-scale pattern structure, such as the repeating geometry of a fabric weave, across millions of local predictions. We address these with a two-stage cascaded design, where the first stage recovers global pattern coherence and the second refines local texture detail, supplemented by a segmentation mask to guide synthesis at ambiguous boundaries. We verify our approach on a collection of self-captured everyday objects and demonstrate globally coherent, materially grounded gigapixel imagery.

This paper addresses the modeling and synthesis of constrained robotic system behaviors using Petri nets (PNs). It investigates how to construct models in which all observable system states satisfy given logical constraints while remaining consistent with executable transition semantics. To answer this, we introduce the Hyper Petri Net (HyPN) approach, which synthesizes Petri nets from Boolean specifications while explicitly distinguishing between observable markings and underlying Petri net execution. The proposed method introduces an explicit execution semantics over observable states, induced by admissible (atomic) firing sequences, ensuring by construction that all observable markings satisfy the constraints and revealing a fundamental mismatch between logical feasibility and executable behavior. This is demonstrated in two scenarios inspired by a lunar rover system. These results are particularly relevant for the design of robotic and autonomous systems, as they provide a structured way to ensure correct system configurations while explicitly accounting for execution constraints. The proposed framework further suggests new research directions in execution abstraction, admissible transition systems, and policy selection for navigating between constraint-satisfying states.

While automated research systems promise to accelerate empirical analysis, they are prone to silent failures: instances in which analysis code executes successfully yet relies on invalid causal assumptions. We present the Artificial Intelligence (AI)-based Epidemiology Research Assistant (ARA), a framework that makes these failures visible by explicitly encoding causal design principles, study-specific assumptions, and methodological constraints. ARA integrates protocol construction, synthetic data generation, and adversarial validation into a unified pipeline. The framework translates natural language research questions into structured causal protocols and executable analysis code by first constructing a protocol and then generating synthetic datasets using Structural Causal Models (SCMs) with known ground-truth effects. This synthetic-data step can also support pipeline development when access to confidential data, such as medical data, is restricted. The generated analysis is then evaluated under controlled violations of identification assumptions. We evaluate ARA on the Automated Causal Reasoning Benchmark, assessing recovery of identification strategies, causal quantities, treatment and outcome variables, and consistency between generated code and approved protocol. Protocol construction and adversarial validation did not consistently improve numerical agreement with benchmark estimates compared with standard LLM-based generation. However, they changed the failure mode: instead of silently returning causal estimates, ARA often surfaced protocol concerns, diagnostic failures, incomplete inference, or downgraded non-causal interpretations. These findings suggest that validity-first automated science systems should be evaluated not only by answer accuracy, but also by whether they indicate when causal claims are unwarranted.

Autoregressive text-to-speech models achieve strong naturalness but suffer from slow inference due to sequential token generation, limiting their deployment in production applications that require low latency. IndexTTS-2 is a state-of-the-art autoregressive TTS model consisting of a GPT, a flow-matching Diffusion Transformer, and a vocoder. Despite its high synthesis quality, its inference speed barely reaches real-time without streaming or batching support. We present Faster IndexTTS-2, which accelerates all neural network components of IndexTTS-2 for production deployment on GPUs using NVIDIA TensorRT and TensorRT-LLM. Faster IndexTTS-2 also enables streaming synthesis for latency-sensitive interactive applications, and batched inference across all components to maximize GPU utilization. Experiments on the Seed-TTS benchmark for both English and Chinese demonstrate up to 5.0$\times$ speedup on the autoregressive GPT and 3.6$\times$ end-to-end, with minimal degradation in word error rate, speaker similarity, and naturalness. Our methodology provides a practical reference for efficiently accelerating similar autoregressive speech models on GPUs.

Behavior Trees (BTs) are widely adopted for complex task execution in robotics, providing modular, reactive control but lacking formal guarantees. However, existing correct-by-construction synthesis from Linear Temporal Logic (LTL) cannot express quantitative timing constraints. This letter synthesizes correct-by-construction BTs from Signal Temporal Logic (STL) specifications. The workspace is modeled as a timed transition system and abstracted into a zone graph, and an augmented state space tracking both logical progress and timing constraints is introduced. A hierarchical fixed-point algorithm computes winning sets for an STL fragment encompassing safety, reachability, response, recurrence, and persistence, yielding BT subtrees with a runtime constraint function. Correctness guarantees are proven and complexity bounds are derived. Simulations demonstrate specification satisfaction with strictly positive robustness, and a physical quadrotor experiment with six STL specifications validates practical deployability.

We propose a chaos-inspired new architecture for EMG-to-Speech (ETS) synthesis called CS-ETS, which combines a Samba-based encoder with two novel chaos-inspired loss functions -- Lyapunov Exponent Regularization (LER) and Multi-Scale Detrended Fluctuation Analysis (MSDFA). LER is designed based on Lyapunov exponents to capture nonlinear fluctuations and sensitivity to initial conditions. MSDFA exploits detrended fluctuation analysis to quantify fractal-like, long-range temporal chaotic correlation. CS-ETS surpasses prior work with a 40.79% lower parameter count (32M vs 54.1M) and introduces a new Post-Vocoder Alignment approach that improves LSD by 2.1x, STOI by 4.7x, and SI-SDR by 1.25x. CS-ETS reduces computation by 13.33% while maintaining improved performance. To the best of our knowledge, for the first time, we show how ETS can be supervised by the subtle non-linear chaotic physics with Samba attention to achieve a significantly smaller model with superior performance.

Graphical User Interface (GUI) agents powered by vision-language models hold promise for automating real-world mobile tasks. However, progress is limited by the lack of high-coverage, long-horizon interaction trajectories collected from element-rich and rapidly evolving apps. Existing pipelines often rely on costly human demonstrations or on-policy framework, which tends to over-sample common flows while missing rare transitions and complex multi-step procedures. To address this problem, we propose SEE, a two-stage data synthesis framework consisting of (i) an efficient exploration stage that builds an explicit UI transition graph over screens and elements, and (ii) a graph-based synthesis stage that composes diverse multi-step trajectories via planning and controlled sampling. This design yields reproducible and explainable data generation, while explicitly preventing spurious cycles and enabling long-horizon composition. Across multiple real-world apps, SEE produces trajectories with an average length of 14.8 steps while avoiding spurious loops, and agents fine-tuned on SEE achieve improved task success and generalization to unseen screens. We will publicly release our synthesis code and dataset.

Expressive speech synthesis for voice assistants requires flexible style control that adapts to explicit requests and broader interaction context. We propose Harness TTS, a lightweight control layer that wraps around a TTS engine to externalize and govern its expressive behavior. It reformulates style control as closed-set prompt-tool routing: offline, a compact registry of stylistic prompt tools is constructed with structured metadata; online, an LLM planner selects the appropriate tool based on a priority-aware observation schema, and the TTS executor synthesizes speech using the corresponding prompt audio. We evaluate Harness TTS on both routing and synthesis tasks. In routing, Qwen3-4B achieves Top-1 accuracies of 74.3%, 43.0%, and 64.6% on explicit, implicit, and conflict subsets. For synthesis, experiments on CosyVoice3 and VoxCPM2 show that Harness TTS outperforms instruction-only control, achieving higher instruction-following win rates (margins of 23.1-35.6 points on CosyVoice3 and 13.8-20.0 points on VoxCPM2) and improving UTMOSv2 scores by 0.11-0.38. Moreover, the 4B planner delivers its first tool recommendation in under 50 ms in standard mode, introducing negligible latency for real-time interaction. These results demonstrate that equipping TTS engines with a dedicated Harness layer offers a practical, auditable, and context-aware solution for voice assistant expression control.