Semantic-Geometric Representations

In particle collider experiments, event reconstruction is the task of inferring the kinematics of short-lived particles produced in the hard scatter from the stable final states recorded by detectors. We decompose event reconstruction into two primary tasks: assigning measured jets and charged leptons to parent particles, and predicting unmeasured neutrino kinematics. We present VyPER, a novel geometric learning framework that represents collider events as hypergraphs with a physics-inspired topology. VyPER combines the supervised classification of hyperedges for particle assignment with a diffusion model for predicting neutrino kinematics, leveraging a joint loss function to optimize both reconstruction tasks within a unified framework. We showcase VyPER across several proton-proton collision processes, comparing its performance to existing analytical and machine-learning-based reconstruction techniques. In doing so, we demonstrate that accurate event reconstruction is achievable across a diverse range of Standard Model physics processes, opening new avenues for precision measurements in the Higgs boson, electroweak, and top-quark sectors.

High-capacity associative memories based on Kernel Logistic Regression (KLR) exhibit exceptional storage capabilities and robustness. Previous empirical studies identified a hyperparameter regime, the "Ridge of Optimization," where attractor stability is maximized. However, the geometric nature of this regime and the optimization dynamics required to reach it have remained unclear. In this paper, we investigate the static geometry of the parameter space and the learning trajectory of Gradient Descent (GD) in KLR-trained Hopfield networks. Using the eigenvalue spectrum of the Hessian, we reveal that the Ridge corresponds to a phase boundary located adjacent to a rank-1 spectral collapse, acting as a geometric singularity where the principal curvature is massively amplified. Furthermore, we demonstrate that the learning dynamics exhibit a transient self-stabilizing behavior driven by the Edge of Stability (EoS) phenomenon. Rather than seeking flat regions, the network parameters are driven toward a state where the local curvature dynamically equilibrates near the stability limit dictated by the learning rate, allowing the optimization to survive the initial instability. We provide analytical derivations for both the rank-1 asymptotic collapse and the dynamic feedback loop governing this equilibration. These findings suggest that optimal, high-capacity memory representations are not formed in flat minima, but are dynamically sculpted at the highly curved boundaries of geometric singularities.

High-capacity associative memories based on Kernel Logistic Regression (KLR) exhibit a "Ridge of Optimization" characterized by extreme stability and a highly skewed weight spectrum. However, the dynamical process by which learning converges to this critical regime has remained unclear. This paper provides a geometric analysis of the learning trajectories on the statistical manifold of a KLR-trained Hopfield network. By comparing the paths of Gradient Descent (GD) and Natural Gradient Descent (NGD), we elucidate the mechanisms governing the optimization process. Our analysis reveals that learning on the Ridge proceeds in two distinct phases. We show that the extreme curvature of the Ridge causes standard GD to follow a highly oscillatory, non-geodesic path. In stark contrast, NGD explicitly corrects for this geometry, following the ideal geodesic path and completely overcoming the instabilities faced by GD. We demonstrate experimentally that NGD not only converges significantly faster but also achieves a solution with superior generalization performance. These results establish that the highly structured geometry of the Ridge is optimally suited for information-geometric optimization, providing a new perspective on the interplay between learning dynamics and emergent representation geometry.

Open-world object detection (OWOD) extends closed-set detection by requiring models to identify unknown objects and incrementally learn them once annotations become available. In remote sensing imagery, object categories often exhibit latent hierarchical relationships that may be inadequately represented in the Euclidean spaces commonly adopted by existing methods, limiting unknown-object recall and incremental-learning performance. To address this issue, we investigate hyperbolic geometry for OWOD in remote sensing imagery and propose HyRS-OWOD. To improve unknown object recall, we design a two-step unknown-object discovery mechanism: a Decoupled Objectness Learning (DOL) module that disentangles foreground perception from semantic information to separate foreground proposals from background regions, followed by a Hyperbolic Uncertainty Learning (HUL) component that leverages the radius of hyperbolic embeddings as an uncertainty-aware cue for known-unknown discrimination. For incremental learning, we develop a Hyperbolic Metric Learning (HML) strategy that enhances inter-class separability, facilitating the incorporation of novel categories while mitigating catastrophic forgetting. Experiments on three remote sensing benchmarks demonstrate consistent improvements in unknown recall and incremental learning over state-of-the-art OWOD methods.

Much of the literature on structured image recognition has disproportionately focused on the comparison of classification algorithms. Rather than investigating which classifier performs best, this paper instead asks: what should a classifier know before it ever makes a prediction? In structured vision problems such as gesture recognition, facial expression categorization, and medical image analysis, discriminative information lies less in individual pixels and more in spatial relationships between semantic parts. Raw pixel spaces are high-dimensional, sensitive to nuisance variation, and often obfuscate the geometric structures that make visual tasks interpretable. Landmark extraction provides one form of dimension reduction, but it does not by itself determine the information preserved. This paper studies the post-landmark feature map as the central object of analysis and proposes a systematic framework for constructing and interpreting landmark-derived representations as an, informed, feature-based "dimension reduction" step. Using static hand gesture recognition as a case study, we evaluate coordinate, distance, angle, and hybrid representations through perturbation and ablation experiments. The results show that visually variable data exposes substantial gaps between raw coordinate features and their geometrically invariant counterparts, while hybrid representations achieve the strongest overall performance by combining complementary geometric components. These findings frame feature construction as a fundamental modeling decision and ultimately suggests that the question of what representation should a classifier learn from is one worth asking. The code used for feature construction and evaluation is available at https://github.com/ShivMaureeCWRU/Feature_based_dimension_reduction

Protein structure modeling rests on a single computational primitive: the interaction between what a residue is (sequence content) and where it sits (three-dimensional geometry). What is the expressive limit of this layer class? We show that the complete bilinear operator over content-geometry outer products--the sufficient statistic of all second-order interactions--is the expressive ceiling, while the additive message passing of mainstream geometric GNNs is provably blind to content-geometry binding. We then introduce Hyper-Fold, a rank-K separable convolutional backbone approaching this ceiling at message-passing cost: each radius neighborhood is organized into a sequence hyperedge and a contact hyperedge, modulated by an edge-conditioned matrix-valued operator factorized into K learned basis operators with geometry-generated coefficients. Across enzyme function prediction, fold classification, and ligand binding site detection, Hyper-Fold and its hierarchical variant Hyper-Fold-Deep achieve the best results among protein-specific structure encoders; Hyper-Fold-Pocket, an anchored set-prediction head, surpasses UniSite-3D on UniSite-DS and two zero-shot benchmarks with no sequence language model features, 68x fewer parameters, and 4.8x lower latency--suggesting that a sufficiently expressive 3D backbone recovers information that fusion architectures previously borrowed from evolution-scale pretraining.

Activation steering turns localized representations into control directions, but localization alone does not reveal whether a direction has a selective operating regime. We introduce Predictive Memory Localization (PML), which treats the measured-grid intervention path as the predictive object of memory localization. PML separates random-calibrated target movement from semantic-neighbor and capability damage, and compares static localization and supervised geometry with a strength-disjoint low-dose causal response. Our frozen study covers 3,000 records from nine datasets and fourteen domains, yielding 30,000 distinct record-direction-layer paths and 210,000 distinct path-strength evaluations. At layer 7, the geometry-derived RFM/AGOP direction reaches 13.1% target-any and 12.3% clean-any, exceeding random by 3.6 and 3.4 percentage points under a record-paired bootstrap. Across record-, dataset-, and domain-grouped splits, responses at $|α|=0.1$ are the strongest signal for outcomes at disjoint strengths $|α|\in\{0.25,0.5\}$. On held-out records, a predictor-driven selector chooses a coefficient or abstains, improves utility and reduces semantic-neighbor damage relative to a train-tuned fixed-strength policy, and avoids most evaluations in a dense scan. Across three residual-norm-matched base models, learned directions retain selective-path gains and low-dose responses yield 0.801-0.828 record-held-out macro AUROC. PML therefore turns memory localization into a falsifiable forecast of margin-level selective outcomes and a risk-aware intervention decision.

Accurate models of underwater vehicle motion are needed for autonomous execution of marine tasks like infrastructure inspection and scientific sampling. However, such motion is challenging to characterize using traditional physics-based methods. This paper presents a novel data-driven framework for learning stochastic underwater vehicle dynamics. Using Euler-Poincaré dynamics and the geometry of Lie groups, we develop a stochastic physics-informed neural network architecture that respects the physical and geometric constraints of underwater vehicles. Our approach leverages structure-preserving stochastic integration and builds upon moment matching and finite dimensional matching to ensure geometrically-consistent training. We evaluate our approach in simulation and on an underwater vehicle navigating dock pylons in a harbor environment. The results demonstrate that our method learns accurate and robust dynamics models, enabling safe model-based control in challenging marine environments.

We introduce a continuous metric field framework trained by a single causal contrastive loss. The framework encodes a scene into coefficients of a fixed symmetric matrix basis, assembles them into a Lie algebra element, and exponentiates the result to a Riemannian or Lorentzian metric. Across dimensions, this field discovers the full spectrum of geometric structures: from obstacle-avoiding geodesics in robot navigation across planar and manipulator configuration spaces, to event horizons of black holes in Lorentzian spacetime. Extensive zero-shot generalization studies demonstrate that the field captures transferable geometric structure rather than memorizing specific configurations. In the black hole setting, the causal loss spontaneously evolves genuine black-hole-like structures with the correct Lorentzian signature. The same loss, the same architecture, and the same training protocol produce the full range of geometric phenomena across dimensions. The field knows geometry, and geometry knows physics.

With the widespread adoption of Vision Transformers in modern AI, the need to analyze their inherent representational behavior has become increasingly important. While most existing studies emphasize token geometries and training dynamics, the evolution of representational covariance structures and class-level geometric organization remains comparatively underexplored. In this work, we investigate semantic geometry and class separability as representations evolve across the layers of ViT-Small/16 through TGO-III: Semantic Geometry Observatory. It is a framework designed to analyze the emergence of semantic organization, feature evolution, and class-wise representation geometry throughout training. The framework employs multiple complementary observatories, including Linear Probe Accuracy, Fisher Ratio, Class Centroid Distances, Local Intrinsic Dimension, and Local PCA Rank, to quantify the progressive evolution of discriminative representations. Our analysis reveals that class representations become progressively more linearly separable, Fisher discriminability increases, class centroids move farther apart, and local representation manifolds exhibit structured class-dependent geometric complexity. These observations provide empirical evidence supporting the Semantic Expansion Hypothesis, suggesting that the manifold expansion observed in previous observatories is accompanied by the progressive organization of representations into increasingly discriminative semantic structures. Collectively, TGO-III extends the Transformer Geometry Observatory framework by establishing a direct connection between manifold geometry, covariance evolution, and semantic organization during Transformer training.

Learned restriction maps in sheaf graph neural networks are often treated as proof that the model has discovered useful edge geometry. That conclusion does not follow from parameter movement or from a post-hoc ablation: both can show how one checkpoint is organized while leaving open whether learned transport still helps after the rest of the model adapts. We separate these claims with two estimands. Checkpoint reliance intervenes on the maps of a fixed predictor; protocol-relative replacement retrains matched families that remove map capacity, edge variation, or persistent edge assignment. A task-null theorem shows why the claims can diverge: labels identify only the transported classifier directions, leaving $d^2-d$ invisible degrees of freedom in every full $d\times d$ map. An exact frame model then gives the boundary at which reliance becomes unreplaced task value. Label-only training realizes the predicted separation, while audits of public NSD, DNSD, and Directed Sheaf Neural Network (DSNN) implementations recover both replaceable and unreplaced transport regimes on real graphs. All five DNSD benchmarks exhibit fixed-checkpoint reliance. After retraining, assignment-breaking or shared-map controls recover Full performance on four; Roman-Empire retains a $.0675$ advantage over continually resampled assignment and a $.0391$ advantage over a parameter-matched shared map across ten official splits. Thus, a learned map can govern a fitted computation without constituting indispensable edge geometry. Claims of learned transport should pair checkpoint interventions with matched retraining.

This work proposes an adaptation of the attention mechanism for triangle meshes. The core observation is that endowing the attention mechanism with critical properties for learning over meshes -- intrinsicality and triangulation-agnosticism -- enables it to attain state-of-the-art results over several learning-based tasks in geometry-processing. The above is achieved by modifying the attention mechanism from the bottom up based on simple principles from geometry-processing. Namely, the quantities used within attention -- queries, keys and values -- are created by an intrinsic, triangulation-agnostic network, and treated as discretizations of continuous functions. From that, we devise an appropriate attention mechanism that operates over triangle meshes through standard FEM discretization of the resulting integrals of the above functions. Surprisingly, as far as we know, this straightforward approach has not been utilized for learning over meshes. Experiments show our method exceeds current state of the art, including both mesh-based architectures as well as point cloud transformers. Namely, we show significant improvements on several common benchmarks and tasks -- predicting canonical high-frequency signals; predicting deformations; computing dense correspondences, both between full shapes and partial ones; and predicting feature descriptors.

Bounding boxes are fundamental for object localization in visual detection tasks. Among them, oriented bounding boxes are widely used in visual detection tasks, which provide a more precise directional representation. Generally, IoU-based losses are widely adopted to optimize box regression. However, we observed that IoU-driven box optimization suffers from two key issues: (1) it relies solely on geometric properties while ignoring semantic cues; (2) orientation optimization suffers from unstable gradients, causing oscillations in orientation convergence. In this paper, we propose a Fractional Semantic IoU loss to achieve unified semantic-geometric learning with gradient stabilization. First, we design a semantic similarity metric to guide IoU optimization, building a Semantic IoU loss (SIoU loss) with an adaptive gradient gating mechanism. Then, we revisit the gradient instability issue in oriented box optimization and extend the SIoU loss to a fractional-order formulation to build the \textbf{Fr}actional \textbf{S}emantic \textbf{IoU} \textbf{loss} (FrSIoU loss). The FrSIoU loss accumulates historical IoU states to regularize abnormal gradients during bounding box optimization process. Extensive experiments demonstrate that our approach achieves stable performance gains across different bounding box formulations and diverse visual detection tasks. The code will be available on GitHub.

We study Gaussian-width complexity on statistical manifolds through a pair of functionals: the primal Fisher width $w_G(T) = w(G^{1/2}T)$, induced by the Fisher metric, and the inverse-Fisher width $w_{G^{-1}}(T) = w(G^{-1/2}T)$, induced by the inverse Fisher metric. The two widths play complementary statistical roles. On the learning side, the Fisher width measures the size of local parameter fluctuations in the geometry induced by the Fisher information. For Fisher-regular losses, we prove that the scale $w_G(H_r)/\sqrt n$ is attained on sufficiently small Fisher balls. On the recovery side, the inverse-Fisher width captures the effect of anisotropic Gaussian measurements whose covariance is determined by the inverse Fisher information. For sparse recovery, the resulting geometry depends not only on sparsity but also on the position of the active coordinates in the Fisher spectrum. We obtain a two-sided estimate for the corresponding statistical dimension, together with support-sensitive recovery estimates and a natural ordering of supports with different curvature profiles. Finally, we establish a sharp relation between the primal and inverse-Fisher widths. On any common compact coordinate set $T$, they satisfy $$w_G(T)w_{G^{-1}}(T)\geq w(T)^2.$$ Thus, Fisher anisotropy may transfer complexity from one geometry to the other, but cannot reduce both widths relative to the Euclidean scale.

CAD-to-image alignment aims to estimate an object's 9D pose (rotation, translation, and anisotropic scale) from a single RGB image, enabling applications in robotics and augmented reality. Recent zero-shot methods use visual foundation models to match image regions to CAD models, yet typically their correspondences are appearance-driven and degrade under occlusion or sim-to-real domain shift. To address these limitations, we introduce SUFLECA (Scaling Up Feature LEarning for CAD Alignment), a weakly-supervised framework for zero-shot CAD alignment with two key contributions. First, SUFLECA scales up geometry-grounded feature learning from pretrained visual representations through Normalized Object Coordinates (NOCs) supervision on 674K images spanning 12 real and synthetic datasets, learning compact geometry-aware features that generalize across domains. Second, we propose a geometrically consistent matching algorithm that establishes reliable one-to-one CAD-to-image correspondences. Together, these contributions enable accurate, sub-second alignment per object instance without iterative pose refinement. On ScanNet25k, SUFLECA achieves 33.4%/42.3% category/instance accuracy, outperforming, with a smaller computational footprint, the strongest zero-shot baseline by 10.3/12.2 percentage points and, for the first time on this benchmark, even surpassing fully supervised methods. Code is available at: https://github.com/snt-arg/SUFLECA

Category-level object pose estimation is a crucial yet challenging task in both academia and industry, and has achieved remarkable success by leveraging keypoint-based correspondence paradigms. However, most existing methods increasingly rely on stronger feature learning while overlooking whether the established correspondences are geometrically stable across diverse perturbations. This often results in fragile pose recovery under intra-class shape variations and occlusions. To tackle this challenge, we develop a novel Triangle-Invariant Geometric Consistency Learning for Category-Level Object Pose Estimation (TriCons-Pose) to anchor stable keypoints and aggregate pose-invariant cues, yielding reliable canonical mapping and accurate pose estimation. Specifically, a Structure-Consistent Keypoint Detector (SCKD) is designed to identify robust keypoints by enforcing cross-view structural consistency via normalized pairwise distance matching. Moreover, we propose a Pose-Invariant Geometric Aggregator (PIGA) to augment keypoint representations by injecting triangle-based pose-invariant descriptors into a local-to-global attention mechanism. The proposed framework is optimized using standard objective functions while incorporating an additional geometry consistency loss. Extensive experiments on REAL275, CAMERA25, and HouseCat6D datasets demonstrate the effectiveness of the proposed approach.

Parts manufactured with Fused Deposition Modeling (FDM) often require Design for Additive Manufacturing (DFAM) modifications to ensure printability, structural integrity, and reduced post-processing. Current slicers identify defects such as steep overhangs but are unable to modify the underlying geometry. This work presents AgentsCAD, a multi-agent system that bridges raw boundary-representation (B-Rep) geometry and Large Language Model (LLM) reasoning to automate targeted DFM. The workflow begins by parsing a STEP file. The agentic system detects overhangs above a 45°threshold, constructs a face-adjacency topology graph, and optionally injects semantic feature labels from a GraphSAGE model trained on MFCAD++ (59,665 parts), before dispatching a Claude Sonnet design-reasoning agent that recommends reorientations, fillets, chamfers, and similar modifications. A GPT-4o vision-language verifier inspects rendered views to confirm geometric integrity. Outputs include a modified STEP file and a human-readable report. A test case on a birdhouse model demonstrates that the system correctly diagnoses overhangs, selects appropriate defect mitigation strategies, and proposes physically valid corrections, partially solving the geometry-to-language translation problem central to LLM-driven CAD modification.

Exemplar-free class-incremental learning (EFCIL) requires stable decision boundaries within a shifting feature space. While maintaining class-conditional Gaussian statistics provides a principled classification strategy, these parametric summaries remain sensitive to anisotropic representation drift. Existing methods often transport these statistics across tasks using a decoupled, post-hoc paradigm: optimizing a backbone without explicit geometric constraints can distort the legacy manifold, limiting the precision of retroactive alignment. In this paper, we formulate feature transport as an endogenous training constraint rather than a separate post-task step, presenting the Geometry-Anchored Transport Framework. First, we derive an Analytic Geometric Anchor via Mahalanobis-aligned regression to mitigate macroscopic anisotropic drift. Second, we introduce a Topology-Aware Evolution objective that regularizes localized manifold degradation while calibrating a residual network against the analytic prior. By coupling manifold evolution with transport constraints during the primary training phase, our framework mitigates evaluation errors without requiring decoupled fine-tuning. Experiments across CIFAR-100, TinyImageNet, and ImageNet-100 demonstrate that the proposed framework consistently improves upon existing post-hoc alternatives under strict exemplar-free constraints.

Despite the widespread adoption of Vision Transformers (ViTs) and their success across numerous computer vision applications, the fundamental understanding of their dimensional and representational geometry remains relatively underexplored. To address this gap, we introduce Transformer Geometry Observatory (TGO), a systematic framework of experiments and analysis pipelines designed to investigate the representational geometry and dynamics of Vision Transformers. TGO-I, the first installment of the framework, focuses on the spectral geometry of ViT representations. Using a ViT-Small/16 model trained on ImageNet-100, we analyze Effective Rank, Stable Rank, Participation Ratio, Spectral Entropy, Spectral Flatness, Spectral Anisotropy, covariance structure, eigenspectra, and singular value spectra throughout training. Our results reveal a consistent increase in dimensional utilization, accompanied by decreasing anisotropy, increasing spectral entropy, increasing participation ratio, and progressively flatter eigenspectra. Contrary to the common intuition that training should concentrate information into a small number of dominant directions, we observe a progressive redistribution of variance across representational dimensions. This phenomenon is particularly pronounced in the final CLS token representation, which exhibits the highest effective dimensionality and lowest anisotropy within the network.

A central objective of machine learning is to identify structure and patterns in data. Advances in data acquisition have increasingly produced datasets whose observations possess rich geometric form, giving rise to shape spaces that encode variability in object geometry. Such datasets arise across a wide range of disciplines, including biology, medicine, anthropology, and computer vision, where subtle geometric differences often carry important scientific information. Traditional machine learning methods, however, are frequently ill-equipped to account for the nonlinear geometric structure underlying these data. This survey synthesizes a rapidly growing body of work on shape space analysis, which provides a mathematical and computational framework for the study of geometric data. Drawing on ideas from differential geometry, statistics, and machine learning, we organize the literature around a common analytical pipeline: shape representation and parameterization, the rigorous construction of robust geodesic metrics, statistical analysis on shape spaces, and geometry-aware learning methods. We discuss how these tools enable the characterization of shape variability, the comparison of geometric objects, and the analysis of structural trajectories across populations and time. To illustrate the breadth of the field, we highlight applications spanning multiple scales of biological organization, including studies of subcellular morphology and primate tooth evolution. Across these and many other domains, researchers face common challenges arising from complex, nonlinear, and often unaligned geometric variation. The review concludes by identifying key theoretical and computational challenges, as well as emerging opportunities driven by increasingly large and diverse geometric datasets.

Partial-to-full registration remains challenging due to varying overlap ratios, fluctuating point densities, and the presence of noise. While transformers have shown strong potential for point cloud processing, prior methods typically confine them to global context aggregation, overlooking fine-grained local geometry crucial for accurate correspondence. We propose \emph{GAPR-Net}, a learning-based point cloud registration framework with a coarse-to-fine architecture that combines convolution and transformer modules, in which local and global information is fused between the partial and full point clouds using a cross-attention mechanism. To achieve this, a transformation-invariant point-wise geometric feature representation is proposed, which can robustly capture relative geometric features for individual points with respect to their neighboring points. To evaluate the effectiveness of the proposed approach, experiments are conducted on four geometrically distinct bones, including the tibia, femur, pelvis, and thoracic cartilage. The overall registration recall reaches 94.2%, the method results in a low RMSE of 1.992 mm and $R^2$ values of 0.908 and 0.974 for rotation and translation, respectively. The results demonstrate that the proposed method effectively addresses the partial-to-full point cloud registration problem. The proposed method enables highly accurate 3D point cloud registration using partial observation, providing a critical foundation for precise surgical navigation and robotic interventions in computer-assisted surgery. The code will be accessed after the double-blind review process.

Multispectral point cloud (MPC) is composed of 3D spatial-spectral information, which holds tremendous potential for accurate land-cover classification. However, the representation power of classification models is limited by inherent high-dimensional and heterogeneous spatial-spectral information, unbalanced sample distribution, and inter-class spectral similarity of airborne MPCs. We build two MPC datasets and propose an enhanced geometric-spectral feature learning framework based on attentions for airborne MPC classification. A key component in our model is a two-stream feature fusion method with attention mechanisms, which enhances the representation capability of spatial-spectral features from high-dimensional heterogeneous MPCs. The first stream aims to extract position-encoded global spectral features with fusion self-attention, and the second stream comprises a multikernel point convolution and feature aggregation attention to extract spectral-guided geometric features. We then develop a residual attention fusion block to integrate the most informative geometric-spectral features from the two parallel streams. Another important contribution of this work is a joint loss function to improve the learning ability on unbalanced and interclass similar samples. Experimental results on two airborne MPC datasets demonstrate the effectiveness of the proposed method compared with the state-of-the-art methods. Furthermore, the codes and datasets used in this paper will be made available freely at https://github.com/HITlixian/TGRS_GSFF.

We study the generalization of ridge-regularized nonlinear least-squares models via on-average algorithmic stability, deriving error bounds for local minimizers in terms of a data-dependent effective dimension that reflects the geometry of the gradient model at the trained parameters, through the empirical Jacobian Gram matrix and a residual-curvature term. In the linear case, where the curvature term vanishes, this recovers the classical effective dimension of the Jacobian kernel covariance, but evaluated at the trained model rather than at initialization as is typical in neural tangent kernel analyses. We further bound this effective dimension via covering complexity of the gradient features, leading to guarantees that depend on learned geometry rather than parameter count. In particular, for manifold-supported data and piecewise Lipschitz Jacobians, the bounds scale with intrinsic dimension, while for one-hidden-layer ReLU networks, the mechanism can be made explicit through counts of activation-stable regions. Experiments on synthetic manifolds, clustered distributions, and benchmark datasets illustrate trained-Jacobian compression, the tightness of the residual-curvature linearization, and agreement between the stability bound and observed generalization gaps. A key feature of our bounds is the simplicity of their derivation, which follows from first principles using the Brascamp-Lieb inequality under strongly log-concave noise.

Geometric analysis fundamentally distinguishes between \textit{extrinsic} and \textit{intrinsic} perspectives. The dominant paradigm in current 3D representation learning relies on either extrinsic spatial structures or high-level semantics, struggling to capture the essence of shape identity and underlying manifold topology. To bridge this gap, we introduce a novel 3D representation learning paradigm, namely \textbf{PRISM}, for \textbf{P}re-training, which learns isometric embeddings by \textbf{R}ecovering the \textbf{I}ntrinsic \textbf{S}urface geodesic \textbf{M}etric. PRISM incorporates a topology-enforcing objective that explicitly constrains the structure of latent space, alongside a specialized two-stage training recipe mitigating sample imbalance inherent in the distribution of geodesic distances. Experiments demonstrate that our approach shows satisfactory accuracy, robustness, and high efficiency in geodesic distance prediction and achieves superior performance across diverse downstream tasks, including shape recognition, surface parameterization, and non-rigid correspondence. The code will be publicly available at https://github.com/AidenZhao/PRISM.

We introduce Convex Distance Operator Transport (CDOT), the first convex optimal transport framework that aligns distributions across heterogeneous domains by jointly preserving feature correspondence and intrinsic geometric structure. Specifically, CDOT employs an operator-based regularization that aligns aggregated distance structures by introducing distance and conditional expectation operators. Consequently, the proposed regularization improves the robustness to local geometric variations. We further prove that the resulting CDOT discrepancy is a valid pseudometric on the space of attributed compact metric-measure spaces. In addition, we characterize the relationship between CDOT and Gromov--Wasserstein (GW) through a new notion of dispersion gap, formally elucidating the geometric source of non-convexity in GW compared to the convexity of CDOT. In the finite-sample regime, we derive a non-asymptotic risk bound decomposed into optimization and statistical errors, establishing risk consistency under a globally convergent Frank--Wolfe algorithm. Experiments on synthetic point clouds, brain connectomes, and graph classification benchmarks demonstrate better performance over existing methods, with stable and reliable behavior in practice.

We introduce TriSearch, a reinforcement learning framework for optimizing objectives over triangulations of a polytope via bistellar flips. The key idea is a circuit-supported subtriangulation action representation: feasible flips are encoded by their supporting circuit and realized local subtriangulation, enabling a learned policy to rank them using local geometric and combinatorial features. This yields a dimension-agnostic interface and enables efficient traversal of the flip graph without explicit enumeration of the full triangulation space. Instantiated in 3D and 4D, TriSearch generalizes zero-shot from small training instances to larger polytopes with exponentially larger search spaces. It achieves top performance on metric objectives in 3D and, in 4D, discovers more distinct Fine, Regular, Star triangulations of reflexive polytopes, corresponding to Calabi-Yau threefolds, than existing samplers under a fixed budget.

Monocular 3D shape recovery is fundamental to geometric understanding, yet achieving robust generalization across arbitrary viewpoints and unseen object categories remains a significant challenge. In this paper, we present a generalizable deformation learning framework that reconstructs 3D objects by explicitly deforming a category-level shape template to match the target observation. To address complex shape variations between the template and the target, we introduce a geometry-guided feature modeling mechanism. This process first enriches foundation features with template topology to yield a geometry-aware representation, which is then explicitly correlated with the target observation to guide precise deformation. Furthermore, to bridge the disparity between the fixed template and arbitrary target views, we propose a view-adaptive feature aggregation module. This module leverages multi-view template features and their corresponding camera poses to enrich the canonical template representation, ensuring robust feature alignment regardless of the target's perspective. Extensive experiments demonstrate that our approach significantly outperforms state-of-the-art methods in handling large shape variations and diverse viewpoints, exhibiting strong generalization to novel categories and effectively supporting downstream real-world dexterous robotic manipulation tasks. Project homepage: https://GODeform.github.io/

Robustness, domain adaptation, photometric/occlusion invariance, sensor drift, and alignment style are treated as separate literatures with separate method families. Under label-preserving deployment shift they share one geometric object: the covariance Sigma_task = Cov_{Q_n}(n) of ways inputs can change without changing the label. CORAL, adversarial training, augmentation, metric learning, Jacobian penalties, and alignment constraints are not independent tricks--they are estimators of Sigma_task. Fix that object and the Jacobian penalty is pinned by a matrix Sigma' whose range must cover range(Sigma_task)--the matching principle. We prove optimality in a linear-Gaussian model (Thm. A), necessity of range coverage for any quadratic penalty that zeros deployment drift (Thm. G), and the same dichotomy at global minima (Thm. A_global). Wrong-direction/signal-aligned controls (Lemma C; Cor. E/E) and seven estimators (Lemmas D1--D7), plus label-free TDI, yield a falsifiable recipe when Sigma_task must be learned. Thirteen blocks (ML through Qwen2.5-7B) test matched vs isotropic vs wrong-direction penalties on geometry and deployment drift. Twelve match theory where identifiability holds; Office-31 is a named eigengap failure. Partial passes: geometry can improve without every headline task metric moving. A pilot 7B DPO run (one epoch, 240 pairs): matched style-PMH preserves Style TDI where standard DPO degrades it. We do not claim standard training reaches global minima (assumption (O) is open), that estimated Sigma_task is always identifiable, or dominance on every leaderboard. We claim a falsifiable design recipe: estimate Sigma_task, match Sigma', run the controls, report task and geometry separately.

Dictionary learning is a powerful tool for creating interpretable representations. When applied to functional magnetic resonance imaging (fMRI) data, the resulting patterns of brain activity can be used for various downstream tasks, such as brain state classification or population-level analysis. However, a major challenge is the variability in brain geometry across individuals. This is usually addressed by projecting each individual brain geometry onto a common template, which removes subject-specific information. In this work, we introduce a novel approach to dictionary learning on fMRI data that explicitly accounts for this variability. We use the optimal transport-based Fused Gromov-Wasserstein (FGW) distance to compare graphs with different geometries and features. To address the challenge of computing multiple FGW distances for large graphs such as those arising from fMRI data, we rely on amortized optimization to learn a neural network that predicts an approximation of the optimal transport plans, which substantially reduces the computational cost. Additionally, we learn dictionary atoms that depend on the FGW trade-off parameter, which controls the balance between feature alignment and structural consistency. Numerical experiments on the HCP dataset demonstrate that the proposed approach captures different levels of geometric variability in the data and provides representations that preserve essential information.

Learning dynamical systems through operator-theoretic representations provides a powerful framework for analyzing complex dynamics, as spectral quantities such as eigenvalues and invariant structures encode characteristic time scales and long-term behavior. However, dynamical operators are typically estimated independently for each system, preventing the discovery of shared structure across related dynamics. To address this limitation, we posit that related dynamical systems lie near a low-dimensional manifold in spectral operator space. Based on this hypothesis, we introduce DOODL (Dynamical OperatOr Dictionary Learning), a framework that learns a dictionary of characteristic spectral dynamics whose combinations approximate this manifold and yield compact, interpretable embeddings of individual systems. Beyond representation learning, DOODL enables fast and interpretable operator estimation from short and partially observed trajectories by constraining the estimation to the learned operator manifold. Experiments on metastable Langevin dynamics and turbulent plasma simulations demonstrate that DOODL scales to highly complex multiscale regimes while capturing characteristic spectral structure governing the dynamics rather than merely fitting trajectories, achieving errors one to two orders of magnitude lower than independent operator estimation methods in challenging low-data regimes.

Learning dense correspondences across deformable 3D shapes remains a long-standing challenge due to structural variability, non-isometric deformation, and inconsistent topology. Existing methods typically trade off generalization, geometric fidelity, and efficiency. We address this by proposing SGSoft, a unified intrinsic pipeline that (i) constructs a geodesic correspondence field on a canonical template, (ii) learns multimodal dense descriptors guided by pretrained semantic priors with this geodesic correspondence field supervision, (iii) retrieves dense correspondences in a single feed-forward pass via nearest-neighbor search in descriptor space. This formulation enables stable and topology-invariant supervision under large pose variation, structural differences, and remeshing. SGSoft achieves state-of-the-art inter-category generalization while offering the best accuracy-efficiency trade-off among prior methods. It also achieves near real-time inference without pre-alignment, pairwise optimization, or post-refinement. Learned descriptors can be transferred effectively to downstream tasks such as semantic segmentation and deformation transfer, establishing a scalable and deployment-ready paradigm for dense 3D correspondence.

Recent healthcare foundation models have achieved strong predictive performance through large scale self supervised learning, yet their latent representations frequently entangle physiologic severity, intervention intensity, observational structure, and institutional workflow into shared embedding directions. While effective for downstream prediction, such representations remain semantically opaque and unstable under contextual shift. We introduce AURORA, Adaptive Uncertainty aware Representations through Orthogonalized Relational Alignment, a new framework for healthcare representation learning based on contextual latent geometry. Rather than optimizing a single unified embedding manifold, AURORA decomposes representations into orthogonal semantic subspaces corresponding to distinct contextual factors and learns relational consistency objectives within each subspace. This induces latent spaces that are both semantically disentangled and geometrically interpretable. Across multiple clinical prediction and retrieval tasks, AURORA consistently outperforms reconstruction, contrastive, and self distillation baselines while substantially improving contextual disentanglement, neighborhood purity, and robustness under institutional distribution shift. Our results suggest that latent geometry itself constitutes an important axis of healthcare foundation model design and that explicitly structuring representation space according to contextual semantics provides a complementary direction beyond conventional predictive compression objectives.

Sharpness-aware minimization (SAM) encourages flat minima by perturbing parameters along directions of high loss curvature, but treats all parameter directions uniformly, ignoring the underlying loss geometry. We introduce LLQR+SAM, which combines SAM with a learned preconditioner obtained from the recently proposed LLQR framework, a second-order method that recasts steepest descent as a layerwise linear-quadratic regulator problem. The preconditioner is updated sparsely and maintained as a slow exponential moving average, so it captures a smoothed, low-resolution picture of the loss landscape geometry. The SAM perturbation then operates on top of this learned geometry, probing curvature at a faster timescale. We show that this two-timescale structure is not merely a computational convenience: theoretically, the preconditioner amplifies the SAM escape signal in directions that are flat under the average geometry but locally sharp (potholes). Wide, flat basins, by contrast, remain stable. Empirically, LLQR+SAM gives consistent gains over both SAM and LLQR alone across standard vision and sequence modeling benchmarks, supporting the view that slow learned geometry and fast sharpness correction are genuinely complementary.

Point cloud learning often rests on the premise that observed samples are noisy traces of an underlying geometric object, such as a manifold embedded in a high-dimensional feature space. Yet much of this geometry is not captured directly by coordinates, pairwise distances, or learned graph neighborhoods alone. In the smooth setting, differential forms are devices to encode higher order tangency information. In this work, we introduce a new family of principled learnable geometric features for point clouds called neural point-forms (NPFs). In the absence of a natural tangency structure, we instead use Laplacian-based techniques from Diffusion Geometry to build a discrete model for comparing differential forms on point clouds via inner products. In the continuum, submanifolds of a shared ambient feature space are represented as comparison matrices, whose entries describe how pairs of feature forms interact with extrinsic tangency information. We make this intuition precise by proving the long-run consistency of comparison matrices under standard sampling, bandwidth, density, and manifold-hypothesis assumptions. This yields a compact, efficient and permutation-invariant neural layer whose output is a learned form-comparison matrix. Across synthetic and biologically relevant experiments, we show that NPFs provide a competitive, and interpretable representation, with the strongest benefits appearing when labels depend on sampling density, manifold-like structure, or response-relevant population geometry.

In this paper, we study solution operators of physical field equations on geometric meshes from a function-space perspective. We reveal that Hodge orthogonality fundamentally resolves spectral interference by isolating unlearnable topological degrees of freedom from learnable geometric dynamics, enabling an additive approximation confined to structure-preserving subspaces. Building on Hodge theory and operator splitting, we derive a principled operator-level decomposition. The result is a Hybrid Eulerian-Lagrangian architecture with an algebraic-level inductive bias we call Hodge Spectral Duality (HSD). In our framework, we use discrete differential forms to capture topology-dominated components and an orthogonal auxiliary ambient space to represent complex local dynamics. Our method achieves superior accuracy and efficiency on geometric graphs with enhanced fidelity to physical invariants. Our code is available at https://github.com/ContinuumCoder/Hodge-Spectral-Duality

We propose min Generalized Sliced Gromov--Wasserstein (min-GSGW), a sliced formulation for the Gromov--Wasserstein (GW) problem using expressive generalized slicers. The key idea is to learn coupled nonlinear slicers that assign compatible push-forward values to both input measures, so that monotone coupling in the projected domain lifts to a transport plan evaluated against the GW objective in the original spaces. The resulting plan induces a GW objective value, and min-GSGW minimizes this cost directly in the original spaces. We further show that min-GSGW is rigid-motion invariant, a crucial property for geometric matching and shape analysis tasks. Our contributions are threefold: 1) we introduce generalized slicers into the sliced GW framework, 2) we construct a slicing-based efficient GW transport plan; and 3) we develop an amortized variant that replaces per-instance optimization with a learned slicer for unseen input pairs. We perform experiments on animal mesh matching, horse mesh interpolation, and ShapeNet part transfer. Results show that min-GSGW produces meaningful geometric correspondences and GW objective values at substantially lower computational cost than existing GW solvers.

VLN has achieved remarkable progress by scaling data and model capacity. However, the assumption of a static environment breaks down in real-world indoor scenarios, where robots inevitably encounter dynamic pedestrians. Existing human-aware approaches typically treat humans merely as moving obstacles based on implicit visual cues, lacking the explicit reasoning required to interpret human intentions or maintain social norms. To address this, we propose HCSG, the first human-centric framework for VLN. This framework provides a robust foundation for safe, socially intelligent navigation in dynamic human-robot environments that shifts the paradigm from passive collision avoidance to active human behavior understanding. Specifically, HCSG introduces a unified Human Understanding Module that synergizes two key capabilities: (i) geometric forecasting, which predicts human pose and trajectory to anticipate future motion dynamics; and (ii) semantic interpretation, which leverages a Vision-Language Model (VLM) to generate natural language descriptions of human actions and intentions. These semantic-geometric representations are fused into the agent's topological map for instruction-conditioned planning. Furthermore, a social distance loss is introduced to enforce socially compliant interaction distances. Extensive experiments on the HA-VLNCE benchmark demonstrate that HCSG significantly outperforms state-of-the-art methods, achieving a 14% improvement in Success Rate and a 34% reduction in Collision Rate. Our project can be seen at https://haoxuanxu1024.github.io/HCSG/.

Point clouds are a fundamental representation for robotic perception tasks such as localization, mapping, and object pose estimation. However, LiDAR-acquired point clouds are inherently sparse and non-uniform, providing incomplete observations of the underlying scene geometry. This makes reliable geometric reasoning challenging and degrades downstream perception performance. Existing approaches attempt to compensate for these limitations by estimating local geometry, but often rely on hand-crafted statistics or end-to-end supervised learning, which can suffer from limited scalability or require large amounts of accurately labeled data. To address these challenges, we explicitly model point cloud geometry under a principled mathematical formulation. We represent local geometry as a statistical manifold induced by a family of Gaussian distributions, where each point is associated with a Gaussian capturing its local geometric structure. Based on this formulation, we introduce Point-to-Ellipsoid (POLI), a deep neural estimator that predicts per-point Gaussian geometry. POLI learns a mapping from point cloud observations to their underlying geometry in a self-supervised manner, removing the need for labeled data while preserving strong geometric inductive biases. The resulting representation integrates seamlessly into existing robotic perception pipelines without architectural modifications. Extensive experiments show that POLI enables accurate and robust geometry estimation and consistently improves performance across diverse robotic perception tasks.

Graph foundation models (GFMs) seek transferable representations across graph domains but are limited by structural heterogeneity and incompatible node feature spaces. We propose Structure-Centric Graph Foundation Models (SCGFM), which treat graph topology as the primary source of transferable knowledge. Modeling graphs as metric measure spaces, SCGFM introduces learnable geometric bases that define a shared structural coordinate system. Graphs are aligned to these bases via Gromov-Wasserstein distances, yielding structure-aligned latent representations that accommodate heterogeneous graph topologies. To address feature incompatibility, SCGFM employs a structure-aware feature re-encoding mechanism that unifies node representations without assuming a fixed feature dimensionality or requiring dataset-specific preprocessing. Experiments on graph- and node-level tasks demonstrate strong in-domain and cross-domain generalization, outperforming existing GFM approaches.

Modern deep learning architectures increasingly contend with sophisticated signals that are natively infinite-dimensional, such as time series, probability distributions, or operators, and are defined over irregular domains. Yet, a unified learning theory for these settings has been lacking. To start addressing this gap, we introduce a novel convolutional learning framework for possibly infinite-dimensional signals supported on a manifold. Namely, we use the connection Laplacian associated with a Hilbert bundle as a convolutional operator, and we derive filters and neural networks, dubbed as \textit{HilbNets}. We make HilbNets and, more generally, the convolution operation, implementable via a two-stage sampling procedure. First, we show that sampling the manifold induces a Hilbert Cellular Sheaf, a generalized graph structure with Hilbert feature spaces and edge-wise coupling rules, and we prove that its sheaf Laplacian converges in probability to the underlying connection Laplacian as the sampling density increases. Notably, this result is a generalization to the infinite-dimensional bundle setting of the Belkin & Niyogi \cite{BELKIN20081289} convergence result for the graph Laplacian to the manifold Laplacian, a theoretical cornerstone of geometric learning methods. Second, we discretize the signals and prove that the discretized (implementable) HilbNets converge to the underlying continuous architectures and are transferable across different samplings of the same bundle, providing consistency for learning. Finally, we validate our framework on synthetic and real-world tasks. Overall, our results broaden the scope of geometric learning as a whole by lifting classical Laplacian-based frameworks to settings where the signal at each point lives in its own Hilbert space.

Accurate boundary detection in high-dimensional data remains a central challenge in unsupervised learning, particularly in the presence of non-linear structures and heterogeneous densities. In this work, we introduce Mean Curvature Boundary Points (MCBP), a novel geometric framework grounded in Geometric Machine Learning that departs from traditional density-based approaches by explicitly modeling the intrinsic curvature of the data manifold. The method relies on a discrete approximation of the shape operator, estimated from local k-nearest neighbor patches, to compute pointwise mean curvature without requiring explicit manifold parametrization. The key insight of MCBP is to use mean curvature as a principled descriptor of boundary structure: high-curvature regions naturally correspond to transitions between clusters, geometric irregularities, and low-density interfaces. This yields a unified geometric interpretation of boundary, outlier, and transition points. We further introduce an adaptive percentile-based thresholding scheme that enables multiscale boundary extraction without relying on ad hoc density parameters. Beyond detection, we propose a curvature-driven data decomposition that separates samples into smooth (low-curvature) and boundary (high-curvature) subsets, effectively acting as a non-linear geometric filtering mechanism. This representation enhances cluster separability and improves the robustness of downstream unsupervised algorithms. Extensive experiments on synthetic and real-world datasets demonstrate that MCBP consistently improves clustering performance, particularly in complex and high-dimensional scenarios. These results position MCBP as a concrete contribution to Geometric Machine Learning, highlighting the potential of curvature-aware analysis as a unifying paradigm bridging differential geometry and data-driven modeling.

Riemannian geometry provides the fundamental framework for optimization on nonlinear spaces such as matrix manifolds, which arise in machine learning, signal processing, and robotics. While the underlying theory is classical, existing literature often presents results at a high level of abstraction, omitting the detailed coordinate-level derivations required for implementation and algorithm development. This work provides a self-contained and rigorous treatment of the foundations of Riemannian geometry, with a focus on explicit derivations tailored to Riemannian optimization. We systematically develop the key geometric structures -- including tangent and cotangent spaces, tensor calculus, metric tensors, Levi-Civita connections, curvature, and geodesics -- emphasizing step-by-step derivations in coordinates and matrix form. Building on these foundations, we derive the Riemannian gradient, Hessian, exponential map, and retraction in a form suitable for numerical computation. We further specialize these constructions to important matrix manifolds, including the Stiefel, Grassmann, and SPD (Symmetric Positive Definite) manifolds, providing explicit formulas widely used in optimization and geometric machine learning. This monograph develops a unified and implementation-oriented treatment of Riemannian geometry for optimization on manifolds. Its main contribution is the systematic organization and detailed derivation of classical geometric constructions in forms directly usable for algorithm design and numerical implementation. By connecting coordinate-level differential geometry with matrix-manifold formulas, the monograph bridges the gap between abstract theory and practical computation, and provides a reference for researchers and practitioners working in Riemannian optimization and related fields.

Neural networks transform data through learned representations whose geometry affects separation, contraction, and generalization. Recent work studies this geometry using discrete curvature on neighborhood graphs, suggesting Ricci-flow-like behavior across layers. We develop a smooth operator-theoretic alternative for feedforward representation snapshots. Each feature cloud induces a Gaussian-kernel diffusion Markov operator, and transport, spectral, label-boundary, and local-scale observables are derived from this single object via Bakry-Emery $Γ$-calculus. In a balanced Gaussian class-conditional snapshot model with shared covariance, the population operator has closed-form class affinities, leakage, and coarse spectra, all controlled by pairwise regularized Mahalanobis separations $c_\varepsilon^{(a,b)}$. We also prove that the resulting operator observables vary smoothly under feature perturbations, while hard neighborhood-graph diagnostics can change discontinuously. Synthetic experiments validate the closed-form Gaussian bridge, while learned MNIST experiments show that the same operator observables track training, width, and perturbation stability. Together, these results give a stable operator-geometric framework for analyzing feedforward representation geometry.

While representation and similarity learning have improved the sample efficiency of Reinforcement Learning (RL), they are rarely used to shape policy updates directly in the action space. To bridge this gap, a geometry-aware RL algorithm that explicitly incorporates value-based similarity into the policy update, State-Action Value Geometry Optimization (SAVGO), is proposed. In detail, SAVGO learns a joint state-action embedding space in which pairs with similar action-value estimates exhibit high cosine similarity, while dissimilar pairs are mapped to distinct directions. This learned geometry enables the generation of a similarity kernel over candidate actions sampled at each update, allowing policy improvement to be guided directly toward higher-value regions beyond local gradient-based updates. As a result, representation learning, value estimation, and policy optimization are unified within a single geometry-consistent objective, while preserving the scalability of off-policy actor-critic training. The proposed method is evaluated on standard MuJoCo continuous-control benchmarks, demonstrating improvements over strong baselines on challenging high-dimensional tasks. Ablation studies are done to analyze the contributions of value-geometry learning and similarity-based policy updates.

Graph neural networks face two fundamental challenges rooted in the linear structure of Euclidean vector spaces: (1) Current architectures represent geometry through vectors (directions, gradients), yet many tasks require matrix-valued representations that capture relationships between directions-such as how atomic orientations covary in a molecule. These second-order representations are naturally captured by points on the symmetric positive definite matrices (SPD) manifold; (2) Standard message passing applies shared transformations across edges. Sheaf neural networks address this via edge-specific transformations, but existing formulations remain confined to vector spaces and therefore cannot propagate matrix-valued features. We address both challenges by developing the first sheaf neural network operates natively on the SPD manifold. Our key insight is that the SPD manifold admits a Lie group structure, enabling well-posed analogs of sheaf operators without projecting to Euclidean space. Theoretically, we prove that SPD-valued sheaves are strictly more expressive than Euclidean sheaves: they admit consistent configurations (global sections) that vector-valued sheaves cannot represent, directly translating to richer learned representations. Empirically, our sheaf convolution transforms effectively rank-1 directional inputs into full-rank matrices encoding local geometric structure. Our dual-stream architecture achieves SOTA on 6/7 MoleculeNet benchmarks, with the sheaf framework providing consistent depth robustness.

This paper investigates the intrinsic geometrical features of highly similar objects and introduces a general self-supervised framework called the Geometric Attribute Exploration Network (GAEor), which is designed to address the ultra-fine-grained visual categorization (Ultra-FGVC) task in data-limited scenarios. Unlike prior work that often captures subtle yet critical distinctions, GAEor generates geometric attributes as novel alternative recognition cues. These attributes are determined by various details within the object, aligned with its geometric patterns, such as the intricate vein structures in soybean leaves. Crucially, each category exhibits distinct geometric descriptors that serve as powerful cues, even among objects with minimal visual variation -- a factor largely overlooked in recent research. GAEor discovers these geometric attributes by first amplifying geometry-relevant details via visual feedback from a backbone network, then embedding the relative polar coordinates of these details into the final representation. Extensive experiments demonstrate that GAEor significantly sets new state-of-the-art records in five widely-used Ultra-FGVC benchmarks.

Standard supervised learning optimizes for predictive accuracy but remains agnostic to the internal geometry of learned features, often yielding representations that are entangled and brittle. We propose Class-Conditional Activation Regularization (CCAR) to explicitly engineer the feature space, imposing a block-diagonal structure via a soft inductive bias. By shaping the latent representation to confine class energy to orthogonal subspaces, we create an intrinsic geometric scaffold that naturally filters noise and adversarial perturbations. We provide theoretical analysis linking this structural constraint to the maximization of the Fisher Discriminant Ratio, establishing a formal connection between geometric disentanglement and algorithmic stability. Empirically, this approach demonstrates that robustness is an emergent property of a well-engineered feature space, significantly outperforming baselines on label noise and input corruption benchmarks.

Visuomotor policy learning enables robots to perform a wide range of tasks, but small policy models often remain sensitive to changes in object and background appearance. In this work, we investigate the coordination of pretrained vision foundation models with small policy models to improve appearance generalization. We propose a framework in which a small policy model operates on task-relevant visual observations constructed through semantic repainting. A segmentation foundation model identifies the robot and target object, which are rendered with fixed role colors on a constant background. An alternative representation replaces the target's role color with normalized monocular depth predicted by a depth foundation model, providing additional geometric cues. The perception models are adapted using in-distribution data where needed and held fixed during policy training. This design combines the perceptual capabilities of foundation models with a small policy model trained on the resulting observations for action prediction. Evaluations with flow matching policies on simulation benchmarks, together with experiments on two real-world robotic tasks, demonstrate substantial improvements in task success under the evaluated appearance shifts.

We introduce the Geometric Observability Index (GOI), a per-feature sensitivity measure for pose estimation on SE(3). For a Gauss-Newton curvature matrix $H=E[J^\top WJ]$ and a Riemannian metric $G$ on the Lie algebra, the index is the $G$-norm of the influence a single measurement exerts on the estimated pose: $\mathrm{GOI}(z)=\|\mathcal{A}_{OO}^{-1}P_O\,\varphi(z)\|_G$, where $ψ(z)=J^\top Wr(z)$ is the score, $\varphi=G^{-1}ψ$ its gradient representative, $\mathcal{A}=G^{-1}H$ the curvature operator (self-adjoint in the $G$-inner product), $O=\mathrm{range}(\mathcal{A})$ the observable subspace, and $\mathcal{A}_{OO}$ its restriction. This single object (i) equals the norm of the M-estimator influence function, (ii) is governed by the Fisher information, which coincides with the curvature, (iii) exposes weak observability through the smallest eigenvalue $λ_{\min}$, which (iv) also governs finite-sample stability. Operationally the theory cuts both ways. The index is the exact per-measurement attribution: it predicts the true leave-one-out pose shift with log-correlation $r=1.00$. But we also prove that the influence standardized by its inlier null covariance collapses exactly to the classical chi-square residual statistic: residual gating is the leverage-corrected influence test, explaining its robustness from first principles, while raw-influence gating conflates a measurement's information with its harm and over-rejects high-leverage inliers in weakly observable geometry. Experiments on synthetic problems, five TUM RGB-D dynamic sequences, and two KITTI odometry sequences confirm the picture: the two criteria coincide under well-conditioned geometry, and raw-influence gating degrades significantly at $\mathrm{cond}(H)\approx 10^4$, as the leverage analysis predicts for noise-dominated weak directions. All quantitative claims are validated; code is released.

Representational similarity analysis and related methods compare the internal geometries of neural networks, but they measure only alignment between spaces, leaving a blind spot -- whether a representation's structure is reliably recoverable, not merely similar. We introduce geometric stability, a distinct axis, and \textit{Shesha}, a metric that quantifies it from a single representation by correlating dissimilarity matrices built from complementary random halves of the feature dimensions. Unlike CKA and Procrustes distance, Shesha is provably non-invariant to orthogonal rotations of the feature basis. This is by design: the basis is privileged for learned models, since probes, patching, and steering act on coordinates, and a rotation-invariant metric cannot see whether the targeted structure survives them. A double dissociation isolates the mechanism -- removing the top principal component collapses CKA while Shesha holds, whereas rotating a representation into its eigenbasis, which preserves the spectrum and CKA exactly, collapses Shesha. Across 2,463 encoder configurations in seven domains, the metrics are redundant under geometry-preserving transforms and anti-correlate under compression ($ρ=-0.47$). Across 170 vision models spanning 6 clean and 38 corruption-shifted datasets, DINOv2 ranks first or second in transferability on three of six clean datasets yet bottom-quartile in stability on five, an isolated dissociation rather than a trade-off.