Co-Design

Robots are moving out of the structured factory floor and into unstructured environments such as disaster sites, planetary surfaces, and agricultural fields, for which the right robot often does not yet exist. We present GLAMDRING, a framework that synthesizes the optimal robot for a locomotion task and, jointly, learns the controller that drives it. For the given specifications of forward-velocity bounds, a per-actuator power budget, an actuator library, and a payload requirement, GLAMDRING returns a matched quadruped morphology (link geometry and per-joint actuators) and a Hopf-oscillator Central Pattern Generator (CPG) gait policy. We rank feasible designs against a target design objective, viz., maximum speed, minimum Cost of Transport (CoT), or max Payload Margin. Because body and locomotion are coupled, the optimal morphology dictates how a robot is driven, while optimal gait depends on the physical body. We train a small number of CPG policies by reinforcement learning across the space of candidate morphologies, co-learning the gait with the underlying robot hardware. Link lengths and actuators are then resolved post-hoc from the policy's logged operating envelope, reducing synthesis cost to a small, fixed number of reinforcement-learning runs instead of one per candidate. Our experiments show three key findings: co-designing body and gait is necessary to satisfy locomotion constraints; actuator-envelope feasibility, rather than locomotion success alone, determines realizable payload capacity; and canonical animal gaits emerge naturally in most designs from morphology and constraints alone. A real-world demonstration further highlights the efficacy of our work.

Passive counterweights are simple gravity compensators, but a counterweight selected from a single pose is not generally optimal for the configurations and tasks a manipulator actually executes. This paper develops a task-distribution-aware synthesis framework in which the operating distribution $ρ(q)$ enters the design explicitly. For a counterweight moment $p=m_c r_c$ with gravity torque $-gpφ(q)$, the weighted mean-square residual gravity torque has the closed-form minimizer $p^*=E_ρ[τ_gφ]/(gE_ρ[φ^2])$. If payload gravity torque is affine in payload mass, the optimum is also affine: $p^*(m_p,ρ)=p_0^*(ρ)+m_pK_p(ρ)$. For fixed static moment, added counterweight inertia is $I_c=pr_c$ while mass is $m_c=p/r_c$, so mass-radius selection is underdetermined unless physical constraints are specified. A recovered three-link manipulator is used as a case study. At $r_c=0.20$ m, zero-payload equivalent optima are 0.672 kg for uniform joint-space operation, 0.683 kg for approximately uniform task-space operation, 0.713 kg for a representative pick-and-place family, and 0.952 kg for a high-gravity-biased distribution, a change of more than 40% caused solely by the operating distribution. Nondominated fronts show that preferred mass-radius pairs depend on declared engineering bounds. A rated-torque-referenced all-joint screen increases zero-payload feasible task-space coverage from 78.1% without compensation to 93.7% for the uniform-distribution design. A lumped point-mass trajectory study gives a provisional crossover from no counterweight at very aggressive motion to stronger compensation as motion slows. These actuator and dynamic results are engineering consequence studies rather than physical validation.

Personal health interfaces present wellbeing data through standardized dashboards that rarely fit how people interpret or act on it. Personalizing them to what people would like to see for themselves often requires design and technical expertise, a barrier that generative AI may potentially lower. Therefore, we ask what designs emerge and how it enables and constrains the design process. We conducted a co-design study where 14 participants redesigned Google and Apple Health interfaces using Figma Make. Participants reimagined interfaces that supported personal context, future planning, and interactive experiences, yet conversational AI designs converged around chat-window conventions. AI helped materialize loosely articulated ideas, but model defaults and generation latency shaped iteration. The process more readily operationalized interpretability and accountability than privacy, trust, and emotional safety. Generative co-design let participants create interfaces directly, blurring the boundary between intentions and model defaults. We discuss implications for preserving agency and flexible user-directed interfaces.

Developing humanoid robots capable of leveraging human behavioral data is essential for general-purpose embodiment, yet conventional development remains bottlenecked by a decoupled paradigm that isolates hardware design from whole-body control. This approach leads to suboptimal systems that compromise human-like fluidity and agility. To bridge this gap, we introduce a data-driven morphology-control co-design framework that optimizes humanoid morphology for human-like movement. To quantify morphological fidelity, we also introduce a novel metric that jointly considers kinematic retargeting fidelity to human motion and dynamic tracking performance. Our framework achieves state-of-the-art (SOTA) performance across all metrics compared to baseline humanoids (Bumi, K1, and Toddlerbot). Finally, we realize this design in Bridge, an open-source, 88cm-tall humanoid platform released alongside its control policy. We demonstrate that Bridge captures human motion data with superior fidelity, exhibiting exceptional performance across foundational locomotion, robust balance, and highly dynamic maneuvers. Videos and open-source materials: https://sites.google.com/view/bridgerobot.

GPU kernel agents and GPU programming languages have advanced separately, leaving expert kernels difficult to reproduce. Agents usually treat the compiler as a fixed black box and receive only errors, correctness outcomes, and timing, while existing DSLs either hide critical scheduling decisions or expose them through difficult layout abstractions. We present CAKE, a compiler-agent co-design in which agents author CAKE IR, a typed, hardware-explicit schedule representation. CAKE exposes warp roles, memory movement, synchronization, and pipelines while supporting verification, cost modeling, and localized diagnostics. The harness itself evolves: recurring failures become verifier rules, IR primitives, model calibrations, and reusable optimization tactics. In matched implementation-hidden Flash-KMeans clean starts on B200, the best CAKE IR candidate at an 80-million-token budget runs at 1.144x the tuned FlashML baseline, compared with 0.928x for direct CUDA/PTX. Beyond this benchmark, agent-generated Kimi Delta Attention achieves a 2.05x geometric-mean speedup over official FlashKDA and passes end-to-end serving validation. Dispatcher-backed KNN and KMeans improve performance by 1.42x to 2.12x across more than 400 shapes, and four kernel changes are available as upstream PRs. CAKE targets NVIDIA GPUs from Ampere through Blackwell and separates single-shape evolution from library generalization and dispatch.

Multi robot teams performing cooperative transportation face a fundamental challenge: maintaining stable control while keeping communications efficient. This paper investigates how adaptive sampling time adjustment informed by measured network delay and strategic leader rotation can distribute wireless load fairly across the team. We use physics based simulation in MuJoCo with realistic wireless modeling, including time division multiple access, medium access control, jitter, queueing, and packet loss, to evaluate three control approaches: fixed sampling with static leadership, dynamic sampling with static leadership, and dynamic sampling with rotating leadership. Our results reveal an important trade off: dynamic sampling effectively reduces communications overhead without compromising control performance, while rotating the leader role meaningfully improves how fairly airtime is distributed all with negligible impact on the team carrying ability. to the best of our knowledge, being among the first to jointly examine dynamic sampling, rotating leadership, and wireless protocol interactions in physicsrealistic multi robot cooperation, this work provides practical guidance for deploying coordinated robotic teams in real world settings where communications resources are limited.

Classical neural networks frequently produce overconfident predictions on ambiguous or out-of-distribution (OOD) data, a liability that grows with each AI system deployed in safety-critical real-world scenarios. Bayesian neural networks (BNNs) provide a principled framework for uncertainty-aware prediction by replacing deterministic parameters with probability distributions, but repeated sampling increases latency, memory traffic, and energy consumption. Photonic probabilistic computing offers a promising alternative by exploiting intrinsic optical stochasticity for fast and parallel sampling. However, photonic BNNs are not ideal samplers: analog constraints on quantization, programming error, dynamic range, and representable mean and variance restrict the variational families that can be implemented in hardware. In this work, we study which hardware-imposed constraints limit scalable photonic BNN inference, how these constraints can be represented, and which ranges can be tolerated by photonic BNNs beyond small proof-of-concept networks. We formulate photonic BNN inference as constrained stochastic variational inference and perform a systematic ablation study over stochasticity location, stochasticity modality, quantization, programming error, and mean/variance bounds. From these results, we derive concrete co-design guidelines that distinguish hardware constraints that can be compensated by training from those requiring hardware or architecture intervention. We validate these guidelines under coupled, hardware-realistic constraints on Dirty-MNIST, CIFAR-10, and CINIC-10, using Fashion-MNIST and SVHN as OOD benchmarks, showing that hardware-aware training recovers predictive performance and uncertainty quality whenever the required variational family remains representable, whereas violations of representational limits require targeted hardware modifications.

Large Language Models (LLMs) increasingly rely on sparsity to reduce inference cost, but most prior work targets a single sparsity source-either weight or activation-and optimizes for batched multi-user inference. Dual-sparsity, which combines unstructured weight pruning with runtime activation sparsity, offers a compelling tradeoff among model size, accuracy, and latency for single-user decoding, but formulates as a Sparse Matrix-Sparse Vector (spMspV) workload that existing GPU kernels handle poorly. We propose Celty, a co-designed sparse format, GPU kernel, and SIMT microarchitecture for efficient spMspV in LLM inference. At the kernel level, Celty introduces a Run-Length Compressed CSC (RLC-CSC) format that enables vectorized loading of compressed weight columns and exploits both sparsity sources to skip unnecessary memory accesses, with shared memory used for scattered partial-product accumulation. At the microarchitecture level, the Celty Sparse SIMT Core integrates a pipelined RLC decoder to eliminate software-level index reconstruction and repurposes local register files for conflict-free accumulation-operating directly on the same RLC-CSC format without data layout changes. The Celty GPU kernel achieves up to 2.8x speedup over cuBLAS and 2.4x over Flash-LLM. With the Sparse SIMT Core, speedups reach up to 5.3x over cuBLAS at 70% dual-sparsity.

An open-weight LLM can write composition setpoints every five minutes. What a plant still needs is a hard check: named constraints, logged margins, and an admit/block decision before the regulatory layer moves. This paper puts that check in a rule-based forked-twin counterfactual gate (nine pinned constraints) and leaves the regulatory layer unchanged. On Skogestad's Column A the ladder is PID-only (C0), linear MPC (C1), ungated agent (C2), and gated agent (C3) under one contract: identical level closure (M_D, M_B), scenarios, and seeds; C2/C3 share the linear-MPC backend. The split is not subtle. Off-nominal target acquisition: the agent beats Pareto-tuned linear MPC in the strong band (C2/C1 IAE ratio 0.361 at the upper CI). Disturbance rejection on the same 16-point grid inverts by 16.03 at the upper CI (10.18 at the point estimate), where an ungated LLM supervisor does not belong. The gate compresses a specification-abandonment attractor into a bounded offset (d approx. -1.4; P95 cell IAE 11.5 to 0.77). A one-line prompt fix removes the attractor at source (6/10 to 0/10; sensitivity only, not a new headline). In a 250-cell statistical pass, 534 of 590 gate interventions are spec-on-bound geometry: the operating specification sits on a safety limit, so a well-behaved OP becomes inoperable while misbehaving ones are only contained; 318 blocks still correct actively harmful proposals. Headlines are single-column and model-conditional on DeepSeek-V4-Flash. A second-family sweep (NVIDIA Nemotron-3-Super) keeps the disturbance-rejection fails band and plant-side failure geography; magnitudes and protocol operability stay model-conditional, and Super target-acquisition strong cells are survivors only (not confirmation). Transfer means twin, constraint envelope, and setpoint interface, not a second plant class measured here.

Large language models are increasingly used to simulate human preferences in research and practical applications, raising concerns about validation, misrepresentation, and exclusion. Co-designing agents with the people they represent is a promising way to address these concerns, but participation may also mask the problems it appears to solve. This paper explores that tension through a primarily qualitative study in which 12 participants co-designed personal preference agents in the domain of household energy, via a background survey, co-design interview, and validation survey. Participants engaged readily and mostly came to see their agents as representing them well. Independent validation, however, revealed mixed human-agent alignment, with agent responses markedly more homogeneous, decisive, and abstract than the human sample. I argue that participation and process transparency can act as an "overtrust engine" that promotes trust while concealing systematic misalignment with potential structural consequences at scale. I develop this as a core mechanism in participatory preference agent design, treating individual alignment not as a fixed state but as an enacted process.

Deploying a vision-language model with full UI understanding on end devices has long been trapped between accuracy and efficiency: on one side is the accuracy bar for OCR, screen understanding, visual question answering, and element grounding; on the other is the strict compute, memory, and power budget of mobile chips. Existing work either trades one for the other, or stops at simulation without real-device validation. We present StepX-Edge, a 0.9B-parameter on-device UI vision-language model that resolves this tension through three-layer co-design of architecture, training, and deployment. Architecturally, UI-aware Layered Visual Encoding (ULVE) and a Progressive Dimensionality Projection (PDP) connector target the extreme aspect ratios and fine-grained perception of screens, while standard full attention throughout ensures native compatibility with mainstream mobile NPU operators. For training, the five-stage StepX-Curriculum framework is designed around our observation of mutual-promotion effects among UI subtasks, so that all four capabilities grow synergistically under a tight parameter budget rather than interfering. For deployment, a module-wise differentiated two-stage PTQ-to-QAT quantization scheme keeps the post-quantization accuracy loss within 1%. StepX-Edge achieves the strongest overall UI understanding among <=1B models, surpassing all 2B-2.3B baselines on ScreenQA (88.76 F1) and Chinese OCRBench v2 (57.25), and matching 1.3B-2.3B general VLMs on RefCOCO (92.0%) and OCRBench v1 (831) with far fewer parameters. After W4A16+KV8 quantization, the model runs stably on Snapdragon 8 Gen5 devices with ~0.84 s TTFT, 98 tok/s decode, and 1.4 GB peak memory. We will open-source the training data, the full training recipe, and the quantization deployment pipeline.

When sighted practitioners author accessible data visualizations, they build navigation structures (the nodes, edges, and input bindings that govern how assistive technologies traverse an interface) entirely in code, with no visual representation. Without a representation to react to, practitioners cannot develop judgment about what makes navigation good or bad, and the quality ceiling of non-visual experiences is set by the absence of a feedback loop. We address this problem through longitudinal co-design with practitioners across cartography, design systems, and open-source visualization, and make three contributions. First, we introduce an Inspector that renders navigation graphs as interactive node-link diagrams, and a Dimensions API that expresses navigation in terms of data dimensions rather than explicit graph construction. Second we present Skeleton, a direct-manipulation authoring environment in which the properties of an accessible navigation structure are translated into visual representations authors can observe and manipulate. Key techniques include a dual-view editor that simultaneously shows the system's navigation model and the end user's spatial experience, a scaffolding engine that automates spatial node placement by repurposing a visualization rendering pipeline, a live label-template editor with real-time screen-reader-output preview, and a testing mode that makes traversal sequence visually trackable. Third, we evaluate Skeleton through an in-situ study with 8 practitioners across visualization design, engineering, and research. Making navigation structure visible changed how practitioners engaged with accessible design: they reconsidered the architecture of their own visualizations, attended to a broader range of input modalities, and shifted from treating accessibility as a compliance task to treating it as a design problem. (abstract shortened for arxiv)

The rapid expansion of large-scale AI models has led to significant performance breakthroughs across diverse domains, yet it has also raised critical concerns regarding computational costs, energy consumption, and environmental sustainability. This survey provides a comprehensive overview of the green development of large models, emphasizing resource-efficient architectures and full-stack hardware-software co-design. We systematically review recent advances in efficient model construction, including attention operator optimization, linear-complexity architectures, and model sparsification and merging, as well as training and deployment strategies such as data-efficient learning, parameter-efficient fine-tuning, and computational compression. Beyond algorithmic improvements, we explore energy-efficient AI hardware, including mainstream AI chips, memory optimization, cross-platform deployment, and sustainable infrastructure. Furthermore, we examine how large models are being applied to sustainability-critical domains such as DeepSeek, remote sensing interpretation, national-scale infrastructure, and global initiatives. Finally, we discuss key challenges and future directions, highlighting the need for continual learning paradigms, memory-centric hardware, and standardized evaluation protocols. This survey aims to offer a holistic roadmap toward sustainable, scalable, and socially responsible development of large models. Paper homepage: https://cje.ejournal.org.cn/article/doi/10.23919/cje.2025.00.438

Artificial intelligence increasingly drives automated scientific discovery, yet contemporary generalist agents lack physical grounding, frequently hallucinating hardware-incompatible designs. Here, we present a physically grounded, multi-agent discovery engine that autonomously architects hardware-compliant computing systems. Anchored by an Evolutionary Knowledge Graph structuring past scientific innovations, the framework extracts an "algorithmic Chain-of-Thought" to transform blind stochastic search into directed structural evolution. Applied to the extreme testbed of foundation model deployment, the engine evolved two hardware-aware compression methodologies surpassing human-engineered heuristics: Q-Enhance mitigates long-context accuracy loss in dense models, and MoE-Salient-AQ outperforms state-of-the-art manual sparse Mixture-of-Experts designs by 3.7% at sub-3-bit regimes. Utilizing a bandwidth-efficient Sensitivity Profile, we successfully deployed a massive 235-billion-parameter model onto a constrained dual-A100 server, reducing memory requirements by 75% with a marginal 0.64% accuracy degradation. By transforming unconstrained combinatorial search into knowledge-driven autonomy, this establishes a scalable hardware-software co-design paradigm for machine-driven discovery within strict physical boundaries.

Hyperparameter Optimization (HPO) is essential for maximizing machine learning model performance, and its core challenge is sample efficiency: finding strong configurations within a limited budget. Because every HPO tool relies on a surrogate prior that imparts its own inductive bias, individual tools struggle once problems become sufficiently diverse and drift from these priors. Motivated by the reasoning and generalization capabilities of LLMs, recent work has explored using LLMs for HPO and reports improved per-iteration performance. Yet these methods share two limitations with a common origin: they use the LLM as a single-tool replacement evaluated by iteration count. (i) Deployed in place of prior tools, the LLM is itself constrained by its pretraining objective to one family of inductive-biased proposals; this single-source setup still fails to handle the full diversity of problems. (ii) Per-iteration evaluation ignores that, in real runs, LLM inference or tool execution is paid serially on top of model evaluation every round, so iteration-count gains do not translate into end-to-end wall-clock gains. We present ASAP, an agent-system co-design that addresses both limitations. On the agent side, ASAP uses the LLM to integrate a diverse pool of inductive-biased optimizers and to select among their proposals each round. On the system side, ASAP re-architects the loop to reduce end-to-end wall-clock while preserving regret quality: a prefix-stable prompt maximizes KV-cache reuse across rounds; speculation parallelism hides the remaining LLM and tool latency under model evaluation via a relative-error accept test; and a Self-Tuner adapts the speculation threshold from execution logs off the critical path. Extensive experiments on diverse modern HPO tasks show that ASAP consistently outperforms baselines, underscoring the value of tool integration and agent-system co-design.

The proliferation of IoT devices has fueled distributed edge systems to collect vast amounts of sensitive data, creating fertile ground for on-device machine learning applications. While federated learning (FL) mitigates privacy concerns by exchanging model parameters instead of raw data, we identify a critical blind spot in current research. We examine the most commonly used personalized federated learning (PFL) methods, which allow clients to maintain private, personalized models to address data heterogeneity across clients. Through systematic analysis, we reveal that PFL methods exhibit heightened vulnerability to transfer-based adversarial attacks compared to centralized learning paradigms. Wherein, malicious clients can exploit local model knowledge to craft adversarial examples that can compromise peer clients' personalized models. We establish this vulnerability through both theoretical analysis and empirical evaluation across multiple benchmark datasets, demonstrating significant accuracy drops across various PFL methods. To address this challenge, we propose a defense framework combining stochastic input noise, input-scaled trace regularization, and parameter sensitivity maximization to improve FL's robustness. Our findings establish the first systematic study of adversarial threats in PFL systems, providing both diagnostic tools and practical countermeasures.

Co-design of legged robots with elastic elements is challenging due to the non-differentiability of contact dynamics and mechanism engagement. This paper presents SurGE, a framework that computes surrogate gradients of the design objective through a differentiable pipeline consisting of a kinodynamic single-rigid-body (Kino-SRB) model and a design-aware control policy, and injects them into CMA-ES via mean shift with cosine-annealed step decay. On a 4-DOF design space of a hopping robot with unidirectional parallel spring, SurGE achieves 6 times lower cross-seed standard deviation and 18% tighter population concentration compared to vanilla CMA-ES, while matching or improving the best objective. Hardware experiments on a 2D design subspace show that, starting from a hand-tuned initial design, SurGE reduces the design objective by 37.65% on hardware, with the improvement trend identified in simulation transferring consistently to the physical system. SurGE provides the potential to accelerate non-differentiable co-design problems in legged robots via surrogate model gradients.

We present a holistic methodology for artificial intelligence algorithm and accelerator co-design, co-search, and co-generation (A3C3), which jointly optimizes neural network architectures and their hardware implementations to address the inefficiencies of traditional top-down AI system design flows. Conventional AI deployment often treats model design and hardware mapping as separate stages: an algorithm is first developed for accuracy, and only afterward adapted to meet latency, throughput, energy, or resource constraints. This separation can lead to suboptimal systems, particularly as modern AI workloads become increasingly heterogeneous, memory-intensive, and platform-dependent. A3C3 instead parameterizes both algorithmic and accelerator design spaces and searches them jointly, enabling the automatic generation of model-accelerator pairs that better balance accuracy, latency, throughput, energy efficiency, and hardware utilization. This article is a book chapter of the Handbook of Embedded Machine Learning, edited by Sudeep Pasricha and Muhammad Shafique, Springer Nature.

Graph-based retrieval at billion-node scale requires jointly solving three tightly coupled problems -- graph construction, representation learning, and real-time serving -- yet existing work addresses each in isolation. We present RankGraph-2, a framework deployed at Meta that co-designs all three lifecycle stages for similarity-based retrieval (U2U2I and U2I2I), where each stage's requirements shape the others. Serving requires a co-learned cluster index to avoid expensive online KNN -- this pushes index co-training into the training objective. Training benefits from the observation that similarity-based retrieval tolerates pre-computed neighborhoods, eliminating online graph infrastructure -- this requires construction to produce self-contained data. Construction must also support hour-level refresh for item coverage. Acting on these cascading requirements, RankGraph-2 reduces hundreds of trillions of edges to hundreds of billions via subsampling with popularity bias correction, pre-computes multi-hop neighborhoods via personalized PageRank, and co-learns a residual-quantization cluster index that reduces serving computational cost by 83%. This lifecycle co-design enables a simple architecture to achieve 3.8 x higher recall than a GAT + Deep Graph Infomax model on a bipartite graph and 2.1 x higher than PyTorch-BigGraph on item retrieval. RankGraph-2 delivers up to +0.96% CTR and +2.75% CVR, and has powered 20+ retrieval launches across major surfaces.

Traditional design of analog circuits heavily relies on manual interventions across topology, sizing, and layout, with prior automation addressing stages in isolation. In this work, we propose PANDA, an LLM-enhanced framework that bridges high-level design intent to final layout by actively managing cross-stage dependencies through guided topology synthesis, substructure-aware sizing, and constraint-driven layout generation. This shifts automation from algorithm-centric execution to intent-centric co-design, reducing turnaround time from days or weeks to hours while improving design performance.

Artificial Intelligence (AI) systems must typically satisfy service-level objectives including accuracy, latency, and cost. The prevailing model-centric approaches select a monolithic model at design time and apply identical computation regardless of input difficulty, cannot decompose tasks across specialized components, and have knowledge that is fixed at training time. During runtime, this can lead to performance degradation and increasing costs. Because the model is the main design variable, it determines the majority of system behavior, coupling operational objectives to a single design-time choice. Addressing these limitations requires shifting from model-centric to system-centric design. Compound AI systems realize this shift by orchestrating multiple models, algorithms, and tools as distributed AI systems through explicit control logic. The performance of such systems depends on their workflow topology, the models assigned to each task, and the parameters governing runtime behavior. We present a design methodology that organizes this space along two dimensions, workflow topology and configuration selection, and identifies eight design patterns, each consolidating techniques to address a specific limitation of monolithic deployment. We validate our methodology through three case studies. Across our case studies, Compound AI configurations approach accuracy of monolithic models within 2.5 to 4 percentage points while reducing latency by up to 60% and cost by up to 71%. We show that model selection and parameter configuration jointly determine system performance, but the resulting design space grows combinatorially, as workflows compose more patterns and components. Thus, we identify five open challenges that define a roadmap from manually configured prototypes towards systems that automatically discover and maintain SLO-compliance in Compound and Distributed AI systems.

Current Generative AI (GenAI) interfaces remain largely constrained to chatbox interaction, which can impose high cognitive demands on users and create substantial barriers for people with intellectual disabilities (ID), including prompt formulation difficulties, response overload, and limited mechanisms to assess information reliability. To explore alternative interaction models for cognitive accessibility, we conducted a cross-disciplinary co-design challenge in which two student cohorts (Computer Science and Industrial Design) developed interface concepts from the same set of functional requirements (e.g., prompt scaffolding, structured output, GUI-based refinement, transparency, and personalization). Comparing the resulting proposals reveals both convergence on foundational requirements (notably initial calibration, proactive prompting, and direct manipulation of response fragments) and complementary contributions that outline a multi-layered support system. Computer Science teams primarily produced structural scaffolding, emphasizing predictability, navigability, and trust through mechanisms such as reliability indicators, explicit sources, and context management for long conversations. Industrial Design teams emphasized experiential scaffolding, focusing on pacing, attention guidance, multimodality, and proactive agency, including step-by-step response flows, focus modes, and assistant-like integrations. We synthesize these findings into a dual-layer scaffolding framework that expands the design space for cognitively accessible GenAI interaction beyond chat-centric models and motivates future work on expert refinement, technical feasibility, and empirical validation with users with ID.

Deploying neural networks on unconventional hardware demands architectures that co-optimize task accuracy and platform-specific constraints such as energy cost, physical non-idealities, and numerical precision. Existing neural architecture search (NAS) methods are typically tailored to a single hardware family, limiting cross-platform comparison and generalization. We introduce Unconventional Hardware Neural Architecture Search (UH-NAS), a hardware-agnostic, LLM-guided NAS framework that integrates language models as evolutionary operators to co-optimize accuracy and inference energy. By exposing hardware as a swappable backend with per-platform energy models, physical constraints, and non-ideality simulators, UH-NAS enables fair system-level comparisons across various backends without modifying the search algorithm. Tested on optical MZI hardware, UH-NAS discovers more diverse, robust architectures than conventional baselines while outperforming existing LLM-to-NAS approaches. Additional ablations on architecture robustness under non-idealities and the role of system prompts highlight the importance of architecture-hardware co-design for emerging computing platforms.

Designing high-performance legged robots requires jointly optimizing morphology and control. Model-free Reinforcement Learning (RL) offers an alternative to model-predictive control for developing robust controllers without explicitly specifying robot dynamics. Thus, we have seen theuse of RL to train controllers and evaluate designs for robot morphology optimization. While RL has shown success inlocomotion, using it in the co-design inner loop is expensive due to repeated policy training. Universal policies conditioned on morphology offer a promising alternative, but suffer from behavioral diversity collapse, converging to a single strategy that performs sub-optimally across designs. On the other hand, end-to-end Mixture-of-Experts (MoE) architectures fail due to a collapse in its representation. We propose Gaussian Evolutionary Specialists (GES), a framework that decouples design-space partitioning from policy learning to capture diverse behaviors explicitly. GES assigns specialist policies to evolving Gaussian regions and iteratively refines them via training, probing, and territory expansion. The resulting specialists are integrated into a design sampling loop, replacing costly re-training with direct evaluation. When tested on the Buoyancy-Assisted Light Legged Unit (BALLU), GES discovers designs with 5 - 25% higher performance than naive universal policies. On hardware, a GES optimized design overcomes a 24 cm tall obstacle - 3x improvement over the baseline BALLU design. Moreover, GES curtails design optimization time by 37%.

Designing a neural network processor is an end-to-end co-design problem: network architecture and training budget determine the inference workload; hardware mapping decisions determine chip area, latency, and energy; and these characteristics govern fabrication yield and manufacturing cost. In practice, these decisions are made in separate stages, and existing co-design methodologies are tightly coupled to specific algorithms, making it difficult to improve one component without reworking the entire pipeline. This paper presents a unified framework, grounded in monotone co-design theory, that composes four interoperable design blocks spanning network training, chip mapping, wafer-level fabrication, and compute resource allocation. Each block exposes only a functionality-resource interface to the rest of the system, so any block can be refined without structural changes elsewhere. A central contribution is the treatment of uncertainty: rather than collapsing stochastic outcomes into point estimates, the framework introduces Confidence, the inverse of success probability, as an explicit and optimizable resource alongside cost, time, and power. Three case studies validate the approach. The first recovers Pareto-optimal implementations across heterogeneous application scenarios. The second confirms that Confidence functions as a continuously tunable design knob rather than a post-hoc diagnostic. The third demonstrates that improving a single block's implementation set automatically propagates to the global Pareto front, without modifying the co-design diagram.

Transformer-based networks have emerged as prominent AI models with state-of-the-art performance, which potentially pave the way toward artificial general intelligence (AGI). However, their large sizes still hinder their efficient implementation, thus highlighting the need for alternate solutions to enable their energy-efficient acceleration. Recently, state-of-the-art works propose photonic transformer accelerators (PTAs) with significant speedup and energy efficiency improvements over the conventional electronic accelerators. However, their PTA architectures are developed without considering the application constraints (e.g., area, power, energy, and latency). Moreover, their manual design approach also requires huge design time to determine a suitable architecture for the targeted application, hence making this approach not scalable. To address these limitations, we propose DxPTA, a novel design space exploration methodology for enabling efficient hardware/software co-design of the appropriate PTA architecture that meets all constraints. It is achieved by (1) identifying the PTA architecture parameters based on the coherent optical dataflow; (2) analyzing the impact/significance of the parameters; and (3) leveraging this analysis for devising a constraint-aware architecture search algorithm. Experimental results show that, our DxPTA can find the appropriate PTA architectures for different transformer-based models (i.e., DeiT-T/S/B and BERT-B/L). It achieves up to 26mm^2 area, 4.8W power, 39mJ energy, and 6ms latency, for constraints of 50mm^2 area, 5W power, 50mJ energy, and 10ms latency; with 15.2x faster searching time than the exhaustive approach. These results demonstrate the potential of DxPTA methodology for enabling efficient PTA designs for diverse AGI-based applications.

Proteins perform their biological functions through three-dimensional structures encoded by amino acid sequences, and ligand-binding protein co-design requires models that generate sequence-structure compatible proteins under explicit ligand constraints. Although continuous diffusion and flow-based models support ligand-aware design in coordinate or latent spaces, existing discrete diffusion protein language models mainly operate over sequence or structure tokens without direct small-molecule conditioning. We introduce \textbf{ProtLiD$^2$}, a \textbf{Prot}ein \textbf{L}igand-conditioned \textbf{D}iscrete \textbf{D}iffusion model for protein sequence-structure co-design. ProtLiD$^2$ jointly generates amino-acid sequence and discrete structure tokens while incorporating ligand chemical and geometric information through geometry-aware cross-attention. Trained on over one million ligand-protein complexes, ProtLiD$^2$ extends masked discrete diffusion to ligand-aware functional protein design. We further propose maximum confidence-margin guided ReMask decoding, an inference-time self-correction strategy that retains confident predictions and remasks uncertain tokens. ProtLiD$^2$ improves global fold confidence over Complexa in whole-protein design, increasing TM-score from 0.672 to 0.802 and pLDDT from 64.55 to 73.00. In pocket co-design, ProtLiD$^2$ reduces active-site BB-RMSD from 3.46/3.40Å for FAIR/PocketGen to 1.97Å, and improves ligand-aware pass rates over PocketGen from 14.86% to 59.73% and from 6.08% to 23.49% under stricter docking thresholds. These results support ligand-conditioned discrete diffusion as an effective token-space framework for functional protein co-design. Code will be available at https://github.com/auroua/ProtLiD.

Replicating and surpassing the autonomy of natural organisms remains a long-standing goal in robotics. Yet most robotic systems have their structure, materials, and control designed separately, in sharp contrast to the co-evolution in nature. This separation often leads to suboptimal designs, and we still have a limited understanding of the individual and collective contributions of these design entities. In this work, we propose a gradient-based co-design framework that simultaneously optimizes the topology, material distribution, and control policy of a truss-lattice robot. The framework embeds mixed-type topological and material variables into a continuous design space and integrates a neural network controller within a differentiable simulator, capturing their interactions and enabling efficient gradient calculation via automatic differentiation. Furthermore, we develop a constrained optimization to navigate the highly non-convex design landscape and jointly optimize all design entities. Case studies demonstrate that the proposed framework consistently discovers diverse locomotion strategies that outperform baselines obtained through separated design. The framework is also flexible to accommodate different functional requirements and boundary conditions. Using this framework, we further extract design insights that reveal the individual and collective effects of different entities on robotic performance. The proposed framework provides a computational foundation for the autonomous co-design of robotic systems, capable of reconfiguration, locomotion, and other complex autonomous behaviors.

The fast pace of artificial intelligence~(AI) innovation demands an agile methodology for observation, reproduction and optimization of distributed machine learning~(ML) workload behavior in production AI systems and enables efficient software-hardware~(SW-HW) co-design for future systems. We present Chakra, an open and portable ecosystem for performance benchmarking and co-design. The core component of Chakra is an open and interoperable graph-based representation of distributed AI/ML workloads, called Chakra execution trace~(ET). These ETs represent key operations, such as compute, memory, and communication, data and control dependencies, timing, and resource constraints. Additionally, Chakra includes a complementary set of tools and capabilities to enable the collection, analysis, generation, and adoption of Chakra ETs by a broad range of simulators, emulators, and replay tools. We present analysis of Chakra ETs collected on production AI clusters and demonstrate value via real-world case studies. Chakra has been adopted by MLCommons and has active contributions and engagement across the industry, including but not limited to NVIDIA, AMD, Meta, Keysight, HPE, and Scala, to name a few.

The integration of Artificial Intelligence (AI) with Distributed Ledger Technology (DLT) has become a growing research area, yet contributions tend to cluster around specific application domains or examine only one direction of the integration, leaving the broader architectural interplay between the two technologies poorly understood. This work addresses that gap through a structured, bidirectional review of peer-reviewed studies published between 2020 and 2025. We classify contributions along two directions: AI-enhanced DLT, and DLT-enhanced AI. In the first case, we examine how AI techniques improve DLT systems across five layers: data, network, consensus, execution, and application layers. In the second case, we analyse how DLT supports AI systems across five layers: infrastructure, data, model, inference, and application layers, with particular attention to federated learning, model evaluation, and multi-agent coordination. The analysis reveals that most works concentrate on a small subset of layers: execution and consensus for AI-enhanced DLT, data and model for DLT-enhanced AI. Other layers remain comparatively neglected. Despite reported improvements in controlled settings, no study demonstrates deployment at production scale, and the field has not yet offered satisfying answers to fundamental questions around scalability, interoperability, and verifiable execution. We argue that progress will require cross-layer co-design and empirical validation in real-world settings.

Reliable inference requires that artificial intelligence (AI) models provide trustworthy uncertainty estimates, not merely accurate predictions. Recent advances in Bayesian learning have made significant progress toward this goal, and growing concerns about computational overhead have jointly shifted the design criterion from reliability alone to the co-design of reliability and efficiency, i.e., reducing computational overhead while preserving trustworthy uncertainty quantification. This thesis develops a unified framework from two perspectives to address the central question: can we efficiently perform reliable inference?

Real-world control systems must achieve long-horizon objectives (liveness) while respecting continuous-time safety constraints, a combination that motivates hierarchical layered control architectures (LCAs). Existing LCA research, however, lacks (i) a uniform specification language across discrete planning and continuous execution, (ii) formal guarantees that specifications are preserved when interconnecting subsystems at heterogeneous time scales, and (iii) compositional separation between layers, owing to reliance on naive input-filtering laws. This paper addresses all three gaps by importing the safety--liveness decomposition into a heterogeneous assume--guarantee framework: \emph{safety is enforced by invariance} at the continuous-time layer, while \emph{liveness is achieved through refinement} at the discrete-time layer, with inter-layer coordination formalized via vertical refinement and timing-compatibility conditions. We instantiate this contract with a novel LCA combining an MPC planner, an input-to-state stabilizing (ISS) low-level controller, and a reference-governor bridge, and validate it on a Hybrid Energy Storage System (HESS) comprising a battery and a supercapacitor.

LLM routing is increasingly important for selecting suitable models under diverse user needs and deployment constraints, but its practical effectiveness depends on continual adaptation to emerging queries and newly released models. New-LLM integration is particularly challenging, as newly released models lack the query-response-reward interactions required for router training and cannot be profiled as directly as new queries via semantic embeddings. Existing profiles are limited: LLM-generated descriptions are often coarse, while interaction-based embeddings are costly to construct. To address this problem, we propose RouteProfile, a graph-based profiling framework that constructs LLM profiles from public signals in technical reports or model cards, including model family, model description, reported benchmark scores, and benchmark domains. RouteProfile organizes these heterogeneous signals into a graph and studies profile construction along four dimensions: organizational form, representation type, aggregation depth, and learning configuration. We evaluate RouteProfile in training-free cold-start routing and new-LLM integration settings. Experiments show that: (1) structured profiles outperform flat baselines in training-free cold-start routing; (2) model family metadata is more reliable than benchmark domain information; and (3) effective new-LLM integration requires profile-router co-design. Overall, our findings highlight the importance of profile design for enabling routing systems to adapt to the evolving model ecosystem.

Despite advances in dexterous hand manipulation, robotic hand design is still largely decoupled from task-driven evaluation and control, limiting systematic optimization. Existing robotic hand co-design approaches are often limited in scope, optimizing a small subset of design parameters. We introduce a comprehensive parametric framework for robotic hand generation that unifies palm structure, finger kinematics, fingertip geometry, and fine-scale surface curvatures within a single design space. Fine geometric features are introduced through parametric surface deformation kernels that directly influence contact interactions. We validate the framework on design optimization in grasp stability tasks in simulation and real-world dynamic scenarios. Our framework produces simulation- and fabrication-ready hand models and will be released as open-source to enable rapid design iteration for dexterous hand co-design optimization frameworks and cross-embodiment policy training and control research.

AI tools are being deployed over MBSE models today, and those models were not designed for this kind of consumption. The problem is not simply that tools hallucinate: well-prompted frontier models produce competent, useful output over a conformant SysML model, but the reasoning they produce is drawn from training rather than retrieved from the model itself, and different tools over the same model produce different results with nothing in the record to adjudicate between them. The model, in other words, is functioning as a prompt rather than as a knowledge base. Attaching better tools to the same model does not resolve this. The model and the methodology that governs its construction need to be designed together for AI participation, treating the model as a machine-queryable knowledge substrate rather than a structured artefact for human navigation, and that co-design has not yet happened in any systematic way. This paper works through a concrete workflow scenario to show what that gap looks like in practice, proposes three principles that jointly characterise what model and methodology must achieve together, and closes with a call to the community to begin this work before the architectural decisions about AI integration settle without the methodological foundation they require.

Designing the architecture of modern networked systems requires navigating a large, combinatorial space of hardware, systems, and configuration choices with complex cross-layer interactions. Architects must balance competing objectives such as performance, cost, and deployability while satisfying compatibility and resource constraints, often relying on scattered rules-of-thumb drawn from benchmarks, papers, documentation, and expert experience. This raises a natural question: can large language models (LLMs) reliably perform this kind of architectural reasoning? We find that they cannot. While LLMs produce plausible configurations, they frequently miss critical constraints, encode incorrect assumptions, and exhibit stickiness'' to familiar patterns. A natural workaround--iterative validation via simulation or experimentation--is often prohibitively expensive at scale and, in many cases, infeasible, particularly when comparing hardware-dependent alternatives. Motivated by this gap, we present Kepler, a lightweight reasoning framework for architecture design that combines structured, expert-driven specifications with SMT-based optimization. Kepler encodes architecturally significant properties--requirements, incompatibilities, and qualitative trade-offs--about systems, hardware, and workloads as constraints, and synthesizes feasible designs that optimize user-defined objectives. It operates at an abstract level, capturing rules-of-thumb'' rather than detailed system behavior, enabling tractable reasoning while preserving key interactions, and provides explanations for its decisions. Through experiments and case studies, we show that Kepler uncovers interactions missed by LLMs and supports systematic, explainable design exploration.

Deploying tiny object perception on edge platforms is challenging because practical systems must satisfy both strict compute budgets and end-to-end latency constraints. A common strategy is to first select a small number of candidate patches from a high-resolution image and then apply downstream processing only to the selected regions. However, existing detector-based frontends are not well aligned with this setting: strong offline detection accuracy does not necessarily yield effective low-budget patch prioritization, nor does it guarantee usable performance once transport and inference delays are considered. In this work, we study budgeted tiny object selection on edge platforms from a joint algorithm--system perspective. We present DenseScout, a lightweight dense-response selector with only 1.01M parameters, which directly ranks candidate patch locations from a high-resolution scene via a lightweight proxy input and is better aligned with low-budget tiny-object prioritization than detector-style frontends. To bridge offline selector quality and deployable utility, we further develop a transport-aware runtime realization on heterogeneous edge devices and adopt QoS-constrained recall, which counts a target as successfully perceived only if it is covered by the selected regions and the end-to-end processing finishes before the deadline. Experiments show that DenseScout consistently outperforms detector-based baselines in offline budgeted patch-selection evaluation, especially in low-budget regimes, while cross-platform results on RK3588 and Jetson Orin NX show that deployable performance depends jointly on selector quality and runtime realization efficiency. These results suggest that edge tiny object perception should be optimized as an algorithm--system co-design problem rather than as isolated model selection.

Rapid advances in Large Language Models (LLMs) create new opportunities by enabling efficient exploration of broad, complex design spaces. This is particularly valuable in computer architecture, where performance depends on microarchitectural designs and policies drawn from vast combinatorial spaces. We introduce Agentic Architect, an agentic AI framework for computer architecture design exploration and optimization that combines LLM-driven code evolution with cycle-accurate simulation. The human architect specifies the optimization target, seed design, scoring function, simulator interface, and benchmark split, while the LLM explores implementations within these constraints. Across cache replacement, data prefetching, and branch prediction, Agentic Architect matches or exceeds state-of-the-art designs. Our best evolved cache replacement design achieves a 1.062x geomean IPC speedup over LRU, 0.6% over Mockingjay (1.056x). Our evolved branch predictor achieves a 1.100x geomean IPC speedup over Bimodal, 1.5% over its Hashed Perceptron seed (1.085x). Finally, our evolved prefetcher achieves a 1.76x geomean IPC speedup over no prefetching, 17% over its VA/AMPM Lite seed (1.59x) and 21% over SMS (1.55x). Our analysis surfaces several findings about agentic AI-driven microarchitecture design. Across evolved designs, components often correspond to known techniques; the novelty lies in how they are coordinated. The architect's role is shifting, but the human remains central. Seed quality bounds what search can achieve: evolution can refine and extend an existing mechanism, but cannot compensate for a weak foundation. Likewise, objectives, constraints, and prompt guidance affect reliability and generalization. Overall, Agentic Architect is the first end-to-end open-source framework for agentic AI architecture exploration and optimization.

Designing multi-agent robotic systems requires reasoning across tightly coupled decisions spanning heterogeneous domains, including robot design, fleet composition, and planning. Much effort has been devoted to isolated improvements in these domains, whereas system-level co-design considering trade-offs and task requirements remains underexplored. In this work, we present a formal and compositional framework for the task-driven co-design of heterogeneous multi-robot systems. Building on a monotone co-design theory, we introduce general abstractions of robots, fleets, planners, executors, and evaluators as interconnected design problems with well-defined interfaces that are agnostic to both implementations and tasks. This structure enables efficient joint optimization of robot design, fleet composition, and planning under task-specific performance constraints. A series of case studies demonstrates the capabilities of the framework. Various component models can be seamlessly incorporated, including new robot types, task profiles, and probabilistic sensing objectives, while non-obvious design alternatives are systematically uncovered with optimality guarantees. The results highlight the flexibility, scalability, and interpretability of the proposed approach, and illustrate how formal co-design enables principled reasoning about complex heterogeneous multi-robot systems.

Co-design is a high-dimensional search problem in the robot morphology and control design space. Efficient search requires exploiting the structure shaped by their interaction. To understand this structure, we analyze the landscapes of soft locomotion and manipulation tasks. We identify three patterns consistent across regions of their co-design spaces: 1) Within a region, quality varies along a low-dimensional manifold, with minimal variation orthogonal to it, reducing the effective search space dimensionality. 2) In higher-quality regions, the variance in quality is spread across more dimensions, necessitating search to expand dimensionality as quality improves. 3) In higher-quality regions, quality varies along joint morphology-control dimensions, requiring search along them. Using these insights, we devise an efficient co-design algorithm that yields 36% better co-designs than state-of-the-art baselines. We examine their exploration patterns and show that these baselines required an order of magnitude more function evaluations to find co-designs of comparable quality. Finally, we ablate our algorithm to verify that exploiting the identified structure was the key to efficient co-design.

The performance of legged robots depends strongly on both mechanical design and control, motivating co-design approaches that jointly optimize these parameters. However, most existing co-design studies focus on link dimensions and transmission ratios while neglecting detailed actuator design, particularly motor and gearbox parameter optimization, and are largely limited to serial open-chain mechanisms. In this work, we present a co-design framework for a planar closed-chain five-bar monoped that jointly optimizes mechanical design, motor and gearbox parameters, and control parameters for dynamic jumping. The objective is to maximize jump distance while minimizing mechanical energy consumption. The framework employs a two-stage optimization approach, where actuator optimization generates a mapping from gear ratio to actuator mass, efficiency, and peak torque, which is then incorporated into CMA-ES-based co-design optimization of the robot design and control parameters. Simulation results demonstrate an improvement of approximately 30.4% in jump distance and an 11.5% reduction in mechanical energy consumption compared to a nominal design, highlighting the effectiveness of the proposed framework for high-performance and energy-efficient planar jumping.

The rapid advancement of robotics is reshaping what it means for humans and robots to coexist -- through expanded capabilities, more intuitive interactions, and deeper integration into real-world workflows. Beyond sharing physical space, this coexistence is increasingly characterized by organizational embeddedness, temporal evolution, social situatedness, and open-ended uncertainty. Because such coexistence extends beyond a single encounter, understanding healthcare robots requires looking beyond initial acceptance to how stakeholders' perceptions evolve through continued engagement. Yet, prior work has largely relied on single-point snapshots of attitudes and acceptance, offering limited insight into coexistence as a long-term, dynamic process. We address these gaps through in-depth follow-up interviews with nine participants from a 14-week co-design study on healthcare robots. We identify the human perception space, which includes four interpretive dimensions (i.e., degree of decomposition, source of evidence, scope of reasoning, and temporal orientation). We enrich the conceptual framework of human-robot coexistence by conceptualizing the mutual relationship between the human perception space and the robot design space as a co-evolving loop, in which human needs, design decisions, situated interpretations, and social mediation continuously reshape one another over time. Building on this, we propose considerate human-robot coexistence, arguing that humans act not only as design contributors but also as interpreters and mediators who actively shape how robots are understood and integrated across deployment stages. Our related prior work and supplementary materials, including the interview protocol, are available at https://byc-sophie.github.io/considerate-human-robot-coexistence/

Fine-tuning Large Language Models (LLMs) has become essential for domain adaptation, but its memory-intensive property exceeds the capabilities of most GPUs. To address this challenge and democratize LLM fine-tuning, we present SlideFormer, a novel system designed for single-GPU environments. Our innovations are: (1) A lightweight asynchronous engine that treats the GPU as a sliding window and overlaps GPU computation with CPU updates and multi-tier I/O. (2) A highly efficient heterogeneous memory management scheme significantly reduces peak memory usage. (3) Optimized Triton kernels to solve key bottlenecks and integrated advanced I/O. This collaborative design enables fine-tuning of the latest 123B+ models on a single RTX 4090, supporting up to 8x larger batch sizes and 6x larger models. In evaluations, SlideFormer achieves 1.40x to 6.27x higher throughput while roughly halving CPU/GPU memory usage compared to baselines, sustaining >95% peak performance on both NVIDIA and AMD GPUs.The code is available at https://github.com/RegiaYoung/SlideFormer.

Dexterous manipulation is limited by both control and design, without consensus as to what makes manipulators best for performing dexterous tasks. This raises a fundamental challenge: how should we design and control robot manipulators that are optimized for dexterity? We present a co-design framework that learns task-specific hand morphology and complementary dexterous control policies. The framework supports 1) an expansive morphology search space including joint, finger, and palm generation, 2) scalable evaluation across the wide design space via morphology-conditioned cross-embodied control, and 3) real-world fabrication with accessible components. We evaluate the approach across multiple dexterous tasks, including in-hand rotation with simulation and real deployment. Our framework enables an end-to-end pipeline that can design, train, fabricate, and deploy a new robotic hand in under 24 hours. The full framework and generated robot hands are open-sourced and available on our website.