Beamforming

In sub-terahertz (sub-THz) communications, the coupling of ultra-wide bandwidth and severe phase noise (PN) impairments renders conventional joint channel and PN estimation highly complex and computationally prohibitive. To address this, we propose CRFCAN, a complex-valued residual FFT convolutional attention network designed for joint channel and PN estimation. Unlike existing deep learning schemes that rely on cascaded networks or hybrid frameworks combining neural networks with conventional iterative estimators, CRFCAN performs joint recovery in a truly end-to-end fashion through a physics-inspired cross-domain structure. Specifically, Fast Fourier Transform (FFT) and inverse FFT modules are embedded within residual groups to enable iterative feature interaction across the time and frequency domains, thereby capturing both frequency-selective fading and time-varying phase distortions. In addition, two dedicated residual blocks are introduced for complex feature extraction and multiplicative phase-distortion modeling, respectively. A physics-aware PN output tail with soft normalization is further employed to improve estimation stability while preserving the physical characteristics of the effective PN process. Simulation results demonstrate that CRFCAN significantly outperforms conventional algorithms and state-of-the-art deep learning models in terms of normalized mean square error (NMSE) and bit error rate (BER). Notably, CRFCAN achieves superior performance with single-shot, fixed-complexity inference and generalizes well to unseen PN models without fine-tuning, highlighting its robustness and practicality for sub-THz receivers.

Maritime Air-to-Sea links are dominated by a line-of-sight ray and a sea-surface reflected ray whose destructive combination produces deep fades. Existing mitigation strategies optimize Unmanned Aerial Vehicle position or trajectory but leave attitude unexploited. This paper treats the full three dimensional attitude as a physical-layer control variable that shapes the two-ray interference through antenna phase-center displacement. Under small-angle and far-field assumptions, the constructive-interference condition reduces to an affine constraint in the Euler angles and admits a closed-form family of minimum-norm attitude candidates. A differentiable soft-minimum rule yields a smooth reference tracked by a constrained Nonlinear Model Predictive Control controller on a fully-actuated tilting multirotor. The proposed scheme increases cumulative throughput by 11.4% over a pitch-only benchmark and 22.2% over a zero-orientation baseline, while preserving trajectory tracking and respecting actuator limits.

Replay attacks are the most accessible threat to voice-controlled systems, and the acoustic cues that expose them are strongly modulated by the environment in which the attack is mounted. A detector deployed in the field therefore has to absorb new acoustic conditions over time, ideally without revisiting past recordings, since retaining speech indefinitely is both expensive and legally constrained. We frame this as Domain-Incremental Learning (DIL) over acoustic environments and present the first continual learning benchmark for multi-channel replay speech detection, evaluating a state-of-the-art beamformer-based detector over all 24 environment orderings of the ReMASC corpus with five seeds. Sequential fine-tuning forgets severely, raising the error rate on previously learned environments by 18.8 points. Elastic weight consolidation (EWC) halves forgetting but loses plasticity, gradient projection memory (GPM) is statistically indistinguishable from naive fine-tuning, and the proposed task-specific beamformer (TSB) that keeps one spatial front-end per environment significantly improves final and incremental accuracy. We further show that the last environment of the sequence dominates final performance. Code, results, and analysis are available at https://github.com/michaelneri/replay-speech-continual.

Cylindrical watertight enclosures are widely used across various underwater systems, from unmanned underwater vehicles (UUVs), to remotely operated vehicles (ROVs), to various sensor platforms. However, electronics are typically built on rectangular PCBs arranged in horizontal stacks, which inefficiently occupy the circular cross-section volume that is critical for both payload capacity and buoyancy management. This paper presents CUB (Central Utility Board) and CougarTail, a general-purpose system designed to address this gap. CUB is a circular PCB sized for 4-inch-diameter enclosures that consolidates a Raspberry Pi Compute Module 5 (CM5) and an STM32 microcontroller, while also providing power management features and auxiliary connections. Mounted coaxially, CUB reduces the electronics stack of our CougUV from 200 mm of tube length and 709 g to 25 mm and 156 g, returning that length and mass budget to payload and buoyancy trim. CougarTail is an open-source companion sensor mast that houses a GPS antenna and two dual-band (2.4 and 5 GHz) omnidirectional PCB antennas. Both components are validated through bench testing and integration on a CougUV platform, our small open-sourced torpedo UUVs.

This paper studies unmanned aerial vehicle (UAV)-mouted reconfigurable intelligent surface (RIS)-assisted device-to-device (D2D) communication with stochastic link activation. It models UAV motion and attitude, time-varying Rician angles, and angle-dependent RIS reflection. A joint optimization of UAV trajectory, attitude, and RIS phases is formulated to maximize average sum rate under mobility, energy, and hardware constraints. The problem is addressed using deep reinforcement learning and a Decision Transformer trained on expert trajectories from multiple scenarios. Results demonstrate effective cross-scenario generalization, with zero-shot transfer outperforming direct DRL transfer and online fine-tuning achieving competitive performance with fewer interactions.

6G wireless technology is poised to adopt higher and wider frequency bands, leveraging highly directional beamforming. However, the vast bandwidths amplify the impact of beam squinting. Traditional solutions, such as adding a true-time-delay filter to each antenna, are cost-prohibitive due to the required hardware scale. This paper proposes a signal processing alternative using Graph Neural Networks (GNNs) to optimize hybrid beamforming in multicarrier wideband systems. Using a bipartite graph to represent a shared analog beamformer among multiple subcarriers, we develop three GNN structures with distinct digital beamformer representations (i) at the subcarrier nodes, (ii) at the edges, or (iii) integrating traditional singular-value decomposition solutions. By designing an efficient message-passing mechanism, these structures offer insights into the impact of different GNN designs on communication system performance and computational complexity. Extensive analysis and ablation studies show that our proposed GNN structures outperform traditional optimization methods and existing ML-based solutions. Furthermore, the proposed GNNs exhibit strong resiliency to beam squinting and better robustness against imperfect CSI than even fully digital beamforming and all existing hybrid designs. These GNNs can also be extended to multi-user scenarios and demonstrate excellent generalization capabilities, allowing trained models to adapt to diverse multicarrier and multi-user settings without retraining.

Automatic modulation classification (AMC) models are frequently trained and validated on synthetic or channel-cabled data, leaving open the question of how they behave once path loss and antenna pointing error are introduced by a genuine free-space link. We report a curriculum fine-tuning study of a hybrid CNN-Transformer AMC model. The general-purpose, all-32-class dataset underlying the model was built entirely at 915 MHz, on a controlled, clock/PPS-synchronized MIMO-expansion-cable link (not spatial-multiplexing transmission); all subsequent free-space, real-hardware experimentation - the sequential fine-tuning curriculum, matched-distance evaluation, and every reported over-the-air accuracy figure - was carried out at 4 GHz, across five directional-antenna distances (25, 35, 50, 70, 75 cm) under fixed TX/RX gain. Three distances used near-ideal antenna alignment (~99%) and two used a deliberately introduced partial misalignment (~85%), fine-tuned last in the curriculum. We report matched-distance test accuracy (91.8-93.7% across all five 4 GHz conditions) and confusion-matrix analysis grounded in RF theory, and report honestly where our sequential fine-tuning order confounds cumulative link adaptation with antenna alignment, rather than overstating what the data can support.

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

Beamforming methods in millimeter-wave (mmWave) cell-free massive multiple-input multiple-output (CFmMIMO) systems require accurate channel state information (CSI), whose acquisition entails significant training overhead. This paper shows that fully digital cell-free mmWave beamforming can be effectively learned from sub-6 GHz CSI using a graph neural network (GNN). Specifically, we represent a CFmMIMO system as a wireless graph, and the GNN is trained to approximate beamformers that maximize the downlink sum-rate based on the available sub-6 GHz CSI. A message-passing mechanism is proposed to capture inter-user interference and inter-base-station cooperation across different network topologies. Simulation results demonstrate that the proposed sub-6 GHz-assisted GNN-based beamformer achieves competitive and often superior sum-rate performance compared to classical baselines that rely on full mmWave CSI.

Future wireless systems are expected to transform the surrounding space from a passive propagation medium into a smart electromagnetic environment, where engineered surfaces control wave propagation, support wireless sensing, and create programmable electromagnetic fingerprints. A key challenge in realizing this vision is the inverse design of metasurfaces for tailored electromagnetic propagation. While forward analysis evaluates the response of a known geometry, the inverse task starts from a prescribed scattering signature and seeks a physically realizable structure that produces it. This inverse task is inherently nonlinear and often high-dimensional, while candidate solutions may be non-unique and provide no direct indication of practical realizability. Here, we introduce a conditional diffusion framework for inverse design of dielectric resonator metasurfaces from target angular scattering patterns. Trained on T-matrix simulated geometry-response pairs, the model learns a conditional distribution of geometries instead of a deterministic mapping, enabling multiple candidate designs for the ill-posed inverse problem. The best generated metasurface achieves a mean percentage error of 1.39%, outperforming CMA-ES optimization (4.1% after 10 h) while requiring only about one minute for after-training inference. The model also produces lower error distributions than deterministic neural baselines for out-of-distribution spectra, highlighting the potential of diffusion models for efficient metasurface design.

The study presents a systematic machine learning (ML) study of 6G-IoT beamforming optimization (6GBO) using supervised and unsupervised approaches. We compared the predictive power of network, environmental, device, and vision feature groups for 6GBO. Additionally, it addressed other unsupervised perspectives that can enhance 6GBO, including clustering network scenarios using methods such as K-means, DBSCAN, and hierarchical clustering. Several imbalance-aware experiments revealed that network features possess better prediction power than device, environmental, and vision feature groups, as evidenced by their recall, F1-score and ROC-AUC values. For unsupervised ML exploration (assessed using Elbow, Silhouette score, and Davies-Bouldin Index methods), the results indicate that the deployment environment and type of device primarily influence clustering, rather than mobility-based attributes. Furthermore, the explainability analysis showed that bandwidth, IoT sensors, and mobility possess higher global feature importance across the feature groups. In the future, we would apply deep and reinforcement learning techniques to predict throughput/latency or to optimize rewards determined by performance indicators like SNR enhancement

Accurate physical-layer modeling is increasingly essential for reliable ultra-wideband operation and capacity optimization, especially under the intensified inter-channel stimulated Raman scattering (ISRS) effect. This paper proposes the link-adaptive digital twin (LA-DT) for hybrid-amplified ultra-wideband links to overcome the generalization and speed limitations of existing methods, achieving accurate modeling and robust generalized signal-to-noise ratio (GSNR) estimation across diverse links. First, to address EDFA heterogeneity, the GSNR modeling task is decomposed into three key power predictions: ASE, NLI, and signal powers before EDFA entry. Second, to enhance cross-scenario generalization, three dedicated DT models are developed using a novel neural architecture with linear modulation layers (LMLs). Third, for rapid adaptation to unseen scenarios with limited data, three domain discriminators guide few-shot fine-tuning of the LMLs. Fourth, the LA-DT explicitly accounts for Raman amplifier (RA) insertion loss, improving practical deployment reliability. Results across 35 scenarios show that LA-DT reduces RMSE for NLI, ASE, and signal power predictions to 0.151, 0.111, and 0.113 dBm with improvements of 56.0%, 58.4%, and 52.7% over the baseline,and achieves an average GSNR estimation RMSE of 0.114 dBm (55.8% improvement). For 12 unseen scenarios, the LA-DT maintains high accuracy through few-shot fine-tuning with only 20 samples per scenario, achieving an average GSNR RMSE of 0.159 dB and demonstrating strong adaptability and robustness.

Robotic localization under changing sensing conditions can suffer from biased errors and miscalibrated covariances. We present WRAP, an adapter-agnostic Wasserstein-robust plug-in for nonlinear extended Kalman filter (EKF) and error-state Kalman filter (ESKF) stacks. A causal module supplies time-varying effective process and measurement statistics; a mean-preserving Wasserstein local update then computes least-favorable covariances and a robust gain without changing the propagation model, residual, or retraction. This separates mean adaptation from covariance robustification and uses distinct radii for propagation and sensing. On 18 UWB--IMU sequences held out from adapter training, adapter-only and WRAP reduce mean 3-D position RMSE by $19.8\%$ and $27.4\%$ relative to the nominal ESKF; an isotropic ablation reaches $19.5\%$, linking the incremental gain to directional process-covariance redistribution. An in-sample GNSS--INS study shows that mean adaptation provides most of the accuracy gain, while DR improves consistency and mitigates over-tightened classical covariance estimates. The robust solve takes 0.05 ms for UWB and 2.92 ms for GNSS on a Jetson Orin Nano.

Accurate user equipment (UE) localization is critical for beam management in reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) based sixth-generation (6G) networks, especially if the direct base-station-UE links are unavailable. This paper proposes a beam-domain fingerprint framework that maps the received signal-to-noise ratio (SNR) across a small set of predefined RIS reflection states to the UE azimuth angle and range, without requiring channel state information (CSI). Crucially, we extend the framework to a realistic interference-impaired scenario in which a nearby cross-link interferer (CLI) corrupts the clean SNR fingerprint, yielding a signal-to-interference-plus-noise ratio (SINR) fingerprint; an interference-to-noise ratio (INR)-constrained calibration strategy keeps the interference level physically interpretable. Four machine-learning (ML) regressors are evaluated under both conditions. Simulation results at 28 GHz with a 20x20 RIS show that k-nearest neighbors (KNN) achieves the lowest angle MAE of 0.37 degrees and range MAE of 4 cm under clean conditions, rising to 1.4 degrees and 7.6 cm under interference. A key finding is that interference degrades angle estimation substantially more than range estimation across all models, a consequence of the asymmetric encoding of location information in the beam-domain fingerprint.

Low-latency, low-compute speech enhancement is essential for wearable devices with real-time communication requirements, but strict computational constraints significantly limit on-device performance. Knowledge Boosting has been proposed as an effective approach to improve edge model performance by leveraging a more capable server-side model, but performance gains for speech enhancement have been limited. We propose a collaborative framework incorporating three techniques: (1) delayed server output as additional input, (2) layerwise feature boosting that transfers intermediate server representations to guide edge inference, and (3) collaborative multichannel Wiener filtering, which fuses weighted covariance matrices estimated from both server and edge models for improved beamforming. Experimental results demonstrate that the proposed collaborative framework significantly outperforms the edge-only baseline with minimal additional computational overhead.

Beamforming plays a key role in multiple-input-multiple-output (MIMO) communication systems. However, conventional beamforming design normally requires accurate instantaneous channel state information (CSI) and iterative optimization, which incur substantial pilot overhead and computational complexity. Recognizing that radio propagation is intrinsically governed by the physical geometry, we develop a 3D Gaussian splatting for environment-aware beamforming (GSBF) pipeline based on multi-modal data, which characterizes the environment through a persistent 3D Gaussian representation. Specifically, GSBF models the environmental scattering response with reciprocity-preserving bidirectional spherical Gaussian (Bi-SG) kernels and performs two-sided electromagnetic rasterization to render an angular propagator map. The rendered map is then aggregated through an over-complete array-manifold dictionary and projected to the constant-modulus beamformers, thereby synthesizing beams directly from the access point (AP) pose and user position without online instantaneous CSI. Simulations demonstrate that GSBF consistently outperforms baselines such as exhaustive beam alignment (EBA) with lower latency.

Microwave ablation (MWA) is a promising minimally invasive treatment for liver tumors, but its therapeutic outcome strongly depends on patient-specific planning of antenna insertion trajectory, power, and treatment duration. Accurate numerical simulation can provide physically reliable ablation predictions; however, its high computational cost limits its use in optimization-based planning, where repeated forward evaluations are required. To address this issue, we propose a digital twin-based automatic planning framework that combines a neural ablation prediction model with a genetic algorithm. The model was trained on multiphysics simulation data generated from patient-specific tumor and vessel structures, antenna configurations, and treatment conditions, and was used as a fast forward model during planning. The prediction model achieved a Dice score of 95.1%, enabling accurate deep learning-based optimization. In 13 unseen planning cases, the proposed method improved ablation efficiency by 54.3% and reduced organ damage by 55.0% compared with clinician-defined planning, while slightly shortening the insertion path length by 3.3%. Most generated plans were also judged clinically applicable by MWA specialists. Furthermore, the framework enabled approximately 420-fold faster planning than numerical-simulation-based planning, demonstrating its potential as a fast digital twin for quantitative and personalized MWA treatment planning. The code is available at: https://github.com/SeonAengCho/MWA-Planning.git

In this paper, we study an unmanned aerial vehicle (UAV)-assisted integrated sensing and communication (ISAC) system, where a UAV enhances the sensing capability of a base station (BS) towards a target while ensuring reliable communication towards a downlink user. This architecture is practically attractive for future wireless networks due to the UAV's controllable mobility and adaptive sensing coverage in wireless environments. The sensing performance is characterized by the average Cramér-Rao bound (CRB), which quantifies the minimum variance of the unbiased angle-of-arrival estimation. To enhance the sensing performance, the UAV trajectory and beamforming parameters are jointly optimized under power and mobility constraints, while satisfying communication requirements to the downlink user. To address the resulting non-convex problem, we employ null-space projection for beamforming design and adopt deep reinforcement learning for the trajectory optimization over a discrete-time scale. In each time slot, beamforming is optimized based on the channel state information to improve CRB performance while mitigating interference between the BS and the communication user. Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.

This paper introduces a method for real-time processing and transmission of autonomous underwater vehicle (AUV) imagery over low-bandwidth communication links. It leverages artificial intelligence (AI) techniques to identify a set of images that best represent an entire dataset, or automatically finds the most similar images to a given query image for transmission to operators. Combined with metadata of a larger set of images, compressed versions of the selected images can be transmitted over satellite communication links or underwater modems, and provide operators on shore with information about the type of imagery the AUV is collecting while it is still deployed. Data from three deployments off the coast of the UK and in Gran Canaria using different AUVs and imaging systems demonstrate the method in the field. It achieved an almost 400,000-fold reduction in data volume compared to the raw data size, enabling transmission of data summaries of a 2-hour 47-minute-long mapping mission in just over 34 minutes over low-bandwidth satellite communication.

This paper proposes an indoor navigation system for the visually impaired, leveraging Ultra-Wideband (UWB) positioning technology and the DLite path planning algorithm. The system utilizes UWB sensors to provide precision localization in GPS-denied environments. The D Lite algorithm is integrated to optimize travel trajectories and ensure rapid route re-planning in the presence of dynamic obstacles. Experimental results demonstrate that the system operates reliably with low latency, providing safety and flexibility for users in complex indoor spaces.

Ultra-Wideband (UWB) ranging has become a viable option for industrial Autonomous Mobile Robot (AMR) localization due to improved accuracy and low cost. However, real-world deployments remain limited by two recurring challenges: calibrating static anchors can be time-consuming and error-prone, and integrating UWB with existing onboard sensors requires careful design to ensure robust and consistent pose estimation. Addressing these challenges, this paper presents an end-to-end pipeline that combines automatic anchor calibration with a generic multi-sensor estimator tailored to surface-bound vehicle motion. It targets existing AMR stacks in scenarios where robot pose priors are available for initialization. The calibration stage estimates anchor positions and range biases, while the localization stage fuses UWB with proprioceptive sensing in a bias-aware Extended Kalman Filter to improve consistency without extensive parameter tuning. Experiments on a commercial logistics AMR in a warehouse setting demonstrate accurate positioning indoors and across outdoor transitions, with improved consistency compared to an earlier estimator formulation. Evaluation on an independent forklift dataset further indicates transferability to other platforms. The method remains effective in test cases with limited line-of-sight and sparse anchor coverage. These results show that UWB localization can be deployed with substantially reduced manual effort while preserving the accuracy required for industrial AMRs. The collected warehouse dataset is made publicly available.

Active beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) enables hybrid transmitting and reflecting mode to achieve effective signal amplification and full-space coverage, thus providing a promising solution for blockage-aware uplink offloading in heterogeneous mobile edge computing (MEC) systems. However, practical hybrid mode active BD-RIS are realized by reciprocal devices, which inherently generate cross-sector energy leakage that will reshape the system-level energy-latency tradeoff. This paper studies energy-aware offloading and resource allocation for reciprocal active BD-RIS-assisted heterogeneous MEC, where offloading decisions, CPU/GPU computation allocation, transmit powers, receive processing, and active BD-RIS are tightly coupled. The resulting problem is a high-dimensional mixed integer nonconvex problem and is difficult to solve efficiently by conventional per-instance optimization. To address this challenge, we develop an end-to-end joint optimization framework based on a refined version of the distributional soft actor--critic algorithm, named as DSAC-T. By modeling return distributions rather than only expected values, DSAC-T improves policy stability under reward heterogeneity and feasibility-boundary sensitivity. Compared with other baseline algorithms, DSAC-T achieves the best energy-latency reward, the highest feasibility ratio of 81.67%, and a fast online decision time of 0.0267 s per scenario.

With the growing demand for satellite sensing and communication, the limited wireless resources are difficult to support multiple satellite systems. Therefore, it is desired to investigate integrated sensing and communication (ISAC) in low Earth orbit (LEO) satellite systems to enable multi-functionality within a single satellite, thereby saving both spectrum and orbital resources. In this paper, a framework for ISAC in LEO satellite systems is established, where a satellite can simultaneously sense multiple targets and serve multiple communication users (CUs) over the same spectrum. Considering the limited onboard energy of satellite, a novel robust beamforming design algorithm is developed with the goal of minimizing total transmit power while satisfying the mean squared error (MSE) requirements for sensing and signal-to-interference-plus-noise ratio (SINR) requirements for communication in presence of channel phase uncertainty which exacerbates the cross-functional interference. According to theoretical analysis, the proposed algorithm for ISAC in LEO satellite systems is effective. Moreover, extensive simulations confirm the superiority of the proposed algorithm over baselines.

Long range-frequency hopping spread spectrum (LR-FHSS) is a promising uplink physical layer for massive low Earth orbit satellite Internet of Things, where low power terminals report short packets from wide area regions with limited terrestrial infrastructure. However, satellite IoT links are exposed to external interference, and the coexistence of multiple interference components can severely degrade receiver reliability and complicate interference mitigation. Existing recognition methods either focus on single interference scenarios or treat each compound interference combination as an independent class, leading to limited generalization or poor scalability. To address this problem, this paper formulates LR-FHSS uplink compound interference recognition as a multi-instance multi-label learning problem and proposes a multi-domain instance fusion method. The proposed method fuses local instances from the time-frequency and frequency domains and aggregates their predictions for bag-level multi-label recognition. A dataset construction pipeline is developed based on the US915 LR-FHSS configuration and incorporates shadowed-Rician fading and time-varying Doppler to emulate practical satellite communication conditions. Considering the difficulty of obtaining labeled compound interference samples in practice, single-to-compound generalization and few-shot compound interference adaptation are investigated as two practical receiver deployment scenarios. Experimental results show that the proposed method improves the overall exact accuracy over the strongest baseline by 14.71 percentage points in single-to-compound generalization and by 14.81 percentage points in few-shot compound interference adaptation for $r=1$.

We develop an enhanced in-context learning (ICL) framework to improve the performance of pilot-based beamforming in multi-user multiple-input single-output (MU-MISO) systems. The proposed scheme integrates the ICL-Transformer backbone with the pilot encoder-decoder network (EDN) and the beamformer EDN. A crucial feature of our ICL network is that it can handle multiple channel models without retraining, enabled by the construction of model-specific context datasets. To improve convergence and robustness, we introduce three key innovations: (a) a curriculum learning (CL) strategy that smoothly transitions from supervised LMMSE-labeled imitation to unsupervised sum-rate maximization, (b) a self-evolving mechanism that dynamically expands and refines the context datasets for all channel models during CL-based training, and (c) a mismatch-aware extension that incorporates several mismatches into the general ICL framework and bypasses explicit channel calibrations. Ablation studies validate the effectiveness of the in-context architecture and enhanced training strategies. Simulation results over diverse communication environments show that the proposed scheme is able to rapidly adapt to both seen and unseen channel models without gradient-based parameter updates, and can mitigate the mismatch issues via intelligent context constructions. Furthermore, our scheme consistently outperforms the existing beamforming schemes under pilot-based settings, including the WMMSE benchmark and the recent Transformer-based methods.

Coordinated beamforming in distributed 5G networks relies on the timely exchange of inter-cell scheduling information, but backhaul latency makes this information stale. Even a single transmission time interval (TTI) of delay can reduce CBF-SLNR performance below the uncoordinated baseline, because the precoder suppresses interference toward users that are no longer active. Coordination on stale information is therefore worse than no coordination at all. To address this, we propose a two-stage predictive framework in which a Spectral Temporal Graph Neural Network (StemGNN) predicts future user equipment (UE) scheduling states from delayed historical observations, and the predictions replace stale inputs to the CBF-SLNR precoder. Evaluated on a three-cell massive MIMO downlink with 60 UEs and 64 antennas per base station under Quadriga Urban Micro (UMi) channels and a proportional fair scheduler, StemGNN achieves a mean scheduling prediction accuracy of 87.57%, outperforming LSTM, GRU, Simple RNN, and Markov chain baselines at all evaluated horizons, with gains of up to 7.71% over LSTM at longer horizons where inter-UE structural dependencies dominate over temporal autocorrelation. When integrated into coordinated beamforming, the predictions recover 57-73% of the sum rate loss caused by one TTI of backhaul delay, improving sum rate by 9.58-14.35% over the no-prediction baseline and recovering up to 83% of the Lag-1 fairness loss for cell-edge users, with fairness gains persisting at higher lag values where throughput gains diminish. These results show that treating backhaul latency as a spatio-temporal forecasting problem is an effective approach for robust inter-cell coordination in delay-constrained networks.

This paper investigates over-the-air federated learning (AirFL) in wireless systems where the access point is equipped with a multi-waveguide pinching antenna system (PASS). We adopt the widely studied learning-oriented AirFL formulation, which seeks to maximize the number of selected devices while keeping the aggregation distortion below a prescribed threshold. The resulting joint optimization of device selection, receive beamforming, and pinching-antenna placement is highly nonconvex due to the intricate coupling among these system variables. To address this challenge, we develop AirPASS, an alternating optimization framework with two main components: a homotopy-Riemannian margin-consolidation method for device selection and receive beamforming under fixed PASS configuration, and a homotopy-assisted geometry optimization method for updating the pinching-antenna positions under fixed selected devices and beamformer. Experiments show that AirPASS consistently outperforms conventional co-located MIMO baselines, remains close to ideal FedAvg, and achieves an attractive performance-complexity tradeoff relative to SDR-DC and matching-pursuit scheduling alternatives.

In next-generation networks, communication systems will no longer be limited to data transmission and will be expected to acquire awareness of the surrounding environment. This leads to the concept of integrated sensing and communication (ISAC), where the same wireless infrastructure is used for both communication and environmental sensing. Thus, ISAC enables the system to transmit information efficiently and observe and interpret channel variations and user behavior. Motivated by this capability, this work focuses on detecting an active attacker in an urban environment scenario, where the attacker intentionally manipulates beamforming directions to increase interference and mislead the transmitter into allocating the main lobe of beam toward itself instead of legitimate users. We apply game-theoretic approaches to model the interaction between legitimate users and the attacker, and integrate the resulting utility-based formulation into a reinforcement learning (RL) framework. Simulation results demonstrate that the proposed method effectively addresses security challenges in dynamic 6G ISAC systems.

Radio frequency fingerprint identification (RFFI) exploits transmitter-specific hardware imperfections as physicallayer identity cues for Internet of Things (IoT) devices, but deep models often degrade across acquisition environments. In multi-antenna reception, antenna topology and frequencyoffset dynamics structure receiver observations, while capturedependent variation distorts target embeddings and misaligns source-trained decision boundaries. This article proposes physicsinformed structure anchoring with capture-aware prototype calibration (PISA-CAPC) to address both representation and decision mismatches. The two stages separate source representation construction from target decision correction. During source training, PISA organizes antenna tokens through a topology-guided graph, conditions propagation on CFO-derived acquisition dynamics, and applies bounded contextual residual suppression to preserve identity evidence. At deployment, unlabeled capture-aware prototype calibration (U-CAPC) estimates capture-local prototypes and recalibrates target decision scores while keeping the representation and source classifier fixed. Thus, calibration uses neither target labels nor target-domain backbone updates. On a measured WiFi benchmark with four receive antennas and ten transmitters, PISA-CAPC achieves a mean target-domain Macro-F1 of 0.9257 under a balanced transductive setting. Component ablations support complementary roles for topology-guided anchoring, CFO-conditioned modulation, reliability-aware token aggregation, contextual suppression, and capture-aware calibration. These results indicate that physically motivated representation learning can be combined with labelfree decision calibration to improve cross-environment RFFI under the evaluated protocol without changing the deployed backbone.

Linear spatial filters (beamformers) enable robust, generalizable and interpretable speech enhancement with performance guarantees under ideal parameterization. Modern beamformers are often parameterized by deep neural networks, whose performance degrades in dynamic scenarios with multiple moving speakers of unknown directions. We propose a data-driven beamforming pipeline, which only requires an estimate of the target's initial direction. Building on a higher-order ambisonics representation, we show that neural temporal-spectral processing can be decoupled from linear spatial processing, and thereby achieve generalizable and array-agnostic enhancement. By incorporating autoregression into a frame-wise causal framework, we maintain consistent performance throughout fast speaker motion and long recordings. Evaluation on synthetic data demonstrates robust enhancement under challenging conditions with closely spaced and crossing speakers. Real-world recordings in a dynamic office meeting scenario complement these findings and show generalizability across varying ambisonics orders.

The growing demand for privacy-preserving, data-intensive applications such as IoT, augmented reality, and autonomous systems positions Federated Learning (FL) as a key enabler in 6G networks. Over-the-Air FL (OTA-FL) leverages the superposition property of the wireless multiple access channel for efficient aggregation via simultaneous transmissions. Existing methods rely on fixed aggregation schedules and do not jointly address noise, fading, and client heterogeneity. We propose CHARGE-FL (CHannel-Adaptive Robust agGrEgation), a framework that adaptively schedules aggregation based on channel dynamics and application readiness. By combining a tailored optimization strategy with a dual-purpose precoding mechanism, CHARGE-FL mitigates channel distortion and bias from partial updates, achieving superior accuracy, stability, and convergence under realistic wireless conditions. Empirical results under realistic wireless conditions show that CHARGE-FL significantly improves accuracy, stability, and convergence over state-of-the-art OTA-FL methods, particularly in straggler-prone and noisy scenarios.

Accurate work-zone geometry perception is critical for intelligent transportation systems, and ultra-wideband sensing offers a low-cost approach for infrastructure-aided reconstruction. However, outdoor UWB ranging is often degraded by non-line-of-sight propagation, burst noise, and long-tail errors, which can distort downstream spatial reconstruction. We present GAIA, a geometry-aware, infrastructure-anchored learning framework that couples temporal range modeling with latent anchor-layout estimation and deterministic distance projection. GAIA preserves range denoising as the supervised task while orienting the learned distances toward boundary-consistent reconstruction. We evaluate GAIA on a real-world outdoor UWB dataset with synchronized UWB, GNSS, and IMU measurements, and further test robustness using a real-data-calibrated stress-test simulator. GAIA achieves the lowest overall range MSE and highest polygon IoU among evaluated filtering-based and learning-based baselines, reducing MSE by 18.4% and improving polygon IoU by 15.5% over PoseMLP. These results show that geometry-aware range denoising provides an effective path toward spatially coherent work-zone reconstruction.

Pulsar timing arrays (PTAs) provide a unique window into nanohertz gravitational waves (GWs), but extracting astrophysical parameters from noisy, long-baseline timing residuals remains computationally challenging with traditional Bayesian techniques due to the high dimensionality of the parameter space, complex and correlated noise models, and the cost of repeated likelihood evaluations. We introduce a Transformer with a physics-informed positional-encoding framework for the efficient inference of eccentric binary black holes in relativistic orbits from PTA data. Our approach embeds analytical GW phase evolution directly into the model through structured positional encodings, enabling the network to learn physically meaningful representations from raw PTA timing residuals. We then use generative models, including discrete and continuous conditional normalizing flows, to infer posterior distributions within a simulation-based inference framework. Across a range of signal-to-noise ratios, the proposed method achieves improved accuracy, sharper posteriors, and faster inference compared to physics-agnostic baselines. While presented for deterministic white-noise signals, the modular framework readily generalizes to realistic PTA analyses incorporating red noise and additional components. This work highlights the potential of physics-aware deep learning models as scalable alternatives to conventional inference pipelines for next-generation PTA datasets.

Static radio maps provide location-dependent propagation priors, but they cannot capture short-term blockage caused by moving objects. Direct sensing-assisted beam prediction is also limited because a beam index discards SINR margins, MCS thresholds, BS alternatives, and communication-equivalent neighboring beams. This paper proposes QuaMoE-DRF, a quality-aware multimodal dynamic radio map forecasting framework for proactive beam and rate adaptation in ISAC networks. Its core representation is a future beam-SINR field. We show that the full multi-BS beam-SINR field is sufficient for finite-codebook threshold-rate BS, beam, MCS, goodput, and outage decisions. For tractability, the implemented model learns a compact reference-BS local field, complemented by BS-level supervision, joint BS--beam supervision, and latent network context; we also clarify that this compact projection alone is not sufficient for BS association. QuaMoE-DRF fuses static geometry, event-like motion observations, structured sensing states, and wireless history through a quality-aware mixture-of-experts module motivated by inverse-variance fusion under heteroscedastic modality errors. It jointly predicts communication-oriented map channels and proactive BS, beam, and MCS decisions. On a dynamic multi-BS and multi-UE urban benchmark, QuaMoE-DRF achieves 402.5 Mbps effective rate, 0.0417 outage probability, and 0.1836 map RMSE, improving the effective rate by 5.67% and reducing outage by 8.35% over the strongest completed effective-rate baseline. The current validation uses labels from a compact blockage/path-loss simulator, with ray tracing used only for calibration and sanity checking.

Millimeter-wave (mmWave) beam alignment plays a critical role in next-generation wireless systems, yet its efficient implementation remains challenging. Meta-learning and transfer learning have been explored to enable deep learning-based beam prediction models to rapidly adapt to unseen environments; however, existing meta-learning approaches adapt the entire network and are trained from random initialization, leading to a large number of updated parameters and a high meta-training cost, while transfer learning approaches restrict adaptation to part of the network but do not exploit episodic meta-learning, which explicitly trains the model over multiple tasks, to optimize the adaptation process itself. To overcome these limitations, we propose MTL-BA, a meta-transfer learning framework for beam alignment in millimeter-wave multiple-input single-output (MISO) systems that freezes a pre-trained convolutional backbone and meta-learns only lightweight Scale-and-Shift (SS) adapters together with a classifier head. Warm-starting from the pre-trained model and restricting adaptation to the SS adapters and classifier head reduce both the adaptation cost and the meta-training budget without sacrificing prediction performance. Simulation results on the DeepMIMO ray-tracing dataset show that MTL-BA matches the accuracy and spectral efficiency of full fine-tuning across various SNR levels despite updating approximately $17\times$ fewer parameters than both full fine-tuning and Model-Agnostic Meta-Learning (MAML), outperforms last-layer fine-tuning while updating a comparable number of parameters, and approaches MAML's performance while requiring $60\%$ fewer meta-training epochs.

This paper studies energy efficient tracking of power-limited mobile users with the assistance of a Reconfigurable Intelligent Surface (RIS). Since localization pilot transmissions dominate the energy budget of power-constrained devices, we introduce a low-overhead feedback link from the Base Station (BS) to the user to enable dynamic uplink power control. To navigate the discrete and decentralized nature of this active sensing problem, we propose a novel Dual-Agent (DA) deep learning framework that jointly optimizes the discrete RIS phase profiles and the UE's transmit power in real time. Specifically, our approach employs a hybrid training methodology integrating the neuroevolution paradigm with supervised learning, effectively overcoming the non-differentiability of discrete phase responses from the RIS unit elements and the strict information bottleneck of single-bit feedback messages for pilot power control. The proposed DA active sensing framework can be applied with both single- and multi-antenna BSs, the latter with only minor modifications in the structure of one NN: an additional output branch with appropriate structure is included for the latter case to select a valid digital combiner from a finite set. Extensive numerical simulations demonstrate that the proposed scheme achieves highly accurate and robust tracking across diverse target motion models, outperforming extended Kalman and particle filters, as well as, machine learning-based trackers. Furthermore, in static localization, it is shown to significantly outperform traditional fingerprinting schemes, deep reinforcement learning baselines, and standard backpropagation-based estimators.

Accurately explaining hidden patterns in multi-aspect data has typically been done by leveraging labels and/or accompanying auxiliary metadata. However, labels and auxiliary data may be inaccurate (e.g. nonstandard, inconsistent), insufficient (e.g. static tabular metadata for time-dependent recordings), or unavailable. % We propose \fullmethod (\method), which leverages the knowledge of large language models (LLMs) to explain the hidden patterns in human narratives. \method uses task-agnostic and task-specific prompts to explain extracted co-clustered latent patterns from tensor decomposition. To evaluate these explanations, we test the LLMs on forward and backward inference tasks. % Our demo system is available at https://github.com/dawonahn/ECML_PKDD_AnTenA.

Predicting electromagnetic field (EMF) strength in urban environments is essential for cellular network planning but computationally expensive with physics-based simulators. We propose a multi-conditioned dense prediction framework that generates 500 500 EMF maps from building layout images and antenna configurations. Our architecture uses a High-Resolution Transformer (HRFormer) backbone with two complementary conditioning mechanisms: Feature-wise Linear Modulation (FiLM) injects scalar antenna parameters into all backbone stages, while cross-attention fuses 1-D radiation pattern tokens with spatial features at the deepest stage. We further introduce transmitter-relative spatial channels encoding distance, proximity, and bearing from the antenna, enabling coordinate-consistent test-time augmentation (TTA) that reduces test MAE by 6.3%. To address the prediction difficulty imbalance across EMF maps, we design a composite loss combining masked L1, multi-scale structural similarity (MS-SSIM), and a focal L1 term that upweights high-signal pixels, outperforming individual loss components in all metrics. Our best model achieves a test MAE of 0.0461, a 25.2% improvement over a plain UNet baseline and 31.8% over an HRFormer-only baseline.Do-

This paper presents a deep learning-assisted methodology for the inverse synthesis of a compact, wideband inverted Doherty power amplifier (PA). Convolutional neural networks (CNNs) and genetic algorithms (GAs) are jointly employed to generate pixelated Doherty combiner networks that integrate load modulation, impedance matching, power combining, and phase compensation into a single structure. As a proof of concept, we design and fabricate a GaN HEMT Doherty PA with a pixelated output combiner. The prototype achieves a measured peak drain efficiency of 51%-63% and a 6-dB back-off efficiency of 48%-54% over 1.9-2.5 GHz. Within the same frequency range, the measured output power is 44+/-0.3 dBm. Furthermore, with digital predistortion (DPD) applied, the prototype circuit demonstrates an adjacent channel leakage ratio (ACLR) better than -53.2 dBc.

The minimum variance distortionless response (MVDR) beamformer is widely used for multichannel speech enhancement due to strong noise suppression while preserving target signals. In practice, its performance is sensitive to microphone self-noise and array mismatches. Existing approaches typically rely on fixed, manually tuned WNG thresholds or diagonal loading, leading to suboptimal performance under unknown or time-varying acoustic conditions. This paper proposes a data-driven MVDR framework that adaptively estimates the WNG constraint using a deep neural network. The network jointly predicts a time-frequency noise mask for covariance estimation and a frequency-dependent WNG threshold, enabling dynamic robustness-directivity control. A differentiable robust MVDR layer is integrated into the framework, allowing end-to-end optimization. Experiments demonstrate consistent improvements in speech quality and intelligibility over conventional fixed-WNG MVDR methods.

Neural networks outperform classical GCC-PHAT for Time-Difference-of-Arrival (TDOA) estimation in noise and reverberation, yet their internal strategy remains unexplored. To uncover it, we turn GCC-PHAT's mathematical steps into diagnostic targets, probing hidden layers of three architectures (MLP, CNN, Transformer) and complementing with gradient attribution and causal frequency masking. We find that cross-power computation consistently emerges across all architectures and conditions, while PHAT whitening, the defining step of GCC-PHAT, fails to emerge. Instead, networks learn a magnitude-aware frequency weighting that preserves per-frequency reliability information discarded by PHAT. This makes PHAT an information bottleneck: removing it from both classical and neural GCC pipelines improves performance under additive noise. On real-world reverberant data, PHAT remains the best classical weighting, but end-to-end networks achieve lower error by learning data-adaptive weighting.

Traditional microwave filter design typically relies on iterative parameter tuning and predefined topologies, which limits design space and increases development time. This study uses a deep learning approach combining convolutional neural networks with genetic algorithms to automate pixelated microwave filter synthesis. To validate the approach experimentally, both S-parameter and spatial electric-field measurements were analyzed. The synthesized low-pass filter demonstrated excellent agreement between simulated and measured performance, achieving a 7 GHz passband with over 20 dB suppression beyond 9.5 GHz. Electro-optical measurements, for the first time, revealed electric field patterns that resemble coupled transmission-lines or stub structures, providing insight into the emergent characteristics of AI-generated designs.

Driven by their remarkable success in computer vision and inverse problem solving, score-based models are increasingly applied to wireless communications, where they show promise across a range of physical-layer tasks. However, despite this growing interest, the current literature often lacks a rigorous analysis of when score-matching offers a tangible advantage over traditional discriminative learning. This paper aims to address this gap through the use-case of channel estimation, a fundamental inverse problem in wireless systems. We present a theoretically grounded interpretation of score-based channel estimation through the lens of the perception-distortion tradeoff, identifying the conditions where score matching excels as well as its key limitations. In particular, by modeling downstream wireless tasks (e.g., capacity maximization) as functionals of the channel estimation process, we quantify the excess risk incurred by standard distortion-minimization approaches. Extensive numerical results show that under high predictive uncertainty, the large excess risk gap can be offset by score-based estimation, enabling near Bayesian-optimal precoding via the learned posterior, whereas in the low predictive uncertainty regime, discriminative distortion-minimization approaches are preferable due to lower complexity and more efficient use of model capacity.

Ubiquitous perception through RF signals is a pivotal opportunity for future technology: it enables personalized services such as smart living, remote healthcare, automated logistics or interaction through free-space gestures. The ubiquity of Wi-Fi and cellular networks presents a promising platform for the development of innovative sensing tools. Future standards will also introduce dedicated sensing features which, for example, will allow routers to work as frequency modulated continuous wave radios targeting radar applications. Most of the current chip designs support ad-hoc firmware for CSI extraction with MIMO arrangements of the transmitter (TX) and receiver (RX) antennas and OFDM subcarriers. The CSI describes the phase shift and amplitude attenuation of multiple propagation paths on each subcarrier. The latest IEEE 802.11be standard (Wi-Fi 7) offers a wider subcarrier bandwidth of 160MHz (up to 320MHz), providing at least 120 usable pilot subcarriers for CSI or CIR estimation. Additionally, Wi-Fi signals have been recently exploited to track daily human movements and behaviors, while Wi-Fi signal variations have been shown to differ between different people and can consequently be used for their re-identification.

We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.

Wireless foundation models offer a path toward reusable channel state information (CSI) intelligence for sixth-generation (6G) systems. However, existing generic-backbone adaptation and CSI pretraining methods often treat CSI as task tensors rather than propagation-conditioned channel responses, thereby failing to capture the intrinsic time-frequency-spatial geometry of wireless environments. This paper presents a channel-adaptive roadmap toward CSI-native foundation models, proposing a unified framework that aligns pretraining, positional modeling, and attention control with three channel requirements: scale-aware heterogeneous exposure, physical time-frequency-antenna coordinates, and correlation-bounded token interaction. Extensive experiments demonstrate the superiority of the proposed framework across three dimensions: zero-shot generalization, reducing NMSE by more than 4 dB across spatial-temporal-frequency tasks; scale extrapolation, yielding up to a 5.4 dB gain under 8 times unseen antenna scaling; and inference efficiency, accelerating mobility-aware processing by up to 18.8%. A system-level evaluation with Sionna SYS further shows that the proposed framework uses only 7.01% of dense-pilot overhead, reaches -18.64 dB average NMSE, and improves average net spectral efficiency by 36.6% over dense LMMSE and 15.5% over WiFo, indicating that CSI-native representation learning can support pilot-efficient radio access.

CSI-based localization with spatially distributed antenna arrays exposes a basic resource trade-off. Each array can provide a rich view of the channel, but forwarding observations from all arrays to a fusion center is wasteful when only a few carry useful information, and the shared uplink supports only a limited number of simultaneous transmissions. We let each array decide locally whether its current observation is worth reporting, subject to a budget on the average number of active transmitters. We refer to this abstraction as Edge-Triggered Distributed Inference (ETDI). It captures a broader class of task-oriented communication problems where resource-constrained devices share an access channel for a common inference task. We instantiate ETDI for CSI-based localization, a common scenario in vehicular IoT networks. Spatially distributed remote antenna arrays (RAAs) encode local channel state information (CSI) from user equipment (UE) transmissions into latent features, and the fusion center estimates the UE position from the subset of reported features. We propose NARRAS, a decentralized reporting policy in which each RAA combines a recurrent summary of its recent observations with a memory of the last latent it transmitted. Training controls an explicit activity budget through differentiable activity penalties and validation-calibrated deterministic thresholds, and uses channel-chart regularization to shape the latent geometry. Experiments show that, at comparable uplink activity, NARRAS improves localization accuracy over learned and heuristic sparse-reporting strategies, while dense full-report models remain useful budget-free references. In low-activity regimes, chart regularization further reduces high-percentile localization errors, suggesting that geometry-aware latent representations are more robust under sparse reporting.

Adaptive beamforming is a cornerstone of array signal processing, yet its performance often collapses in the face of complex, rapidly changing interference. When interferers appear or move unpredictably, conventional estimators encounter a fundamental memory trade-off: short windows enable rapid tracking but suffer from high estimation variance, while long windows provide stable rejection but fail to adapt to shifts. This challenge is resolved by introducing the Universal Switching Beamformer (USB), which integrates competitive sequential prediction into the beamforming architecture. By employing a linear transition diagram, the USB implicitly maintains an exponentially large family of candidate covariance histories and dynamically re-weights them based on their cumulative output power. This mechanism allows the beamformer to automatically vary its effective memory length without explicit change detection or heuristic parameter tuning. A theoretical upper bound is proven on the regret relative to an omniscient oracle that selects the best piecewise-stationary covariance model in hindsight. Extensive simulations and experiments on the SwellEx-96 dataset demonstrate that the USB achieves the agility of short-window estimators and the precision of long-term integration, providing a principled solution for tracking highly non-stationary scenes.

Diffractive deep neural networks (D2NNs) promise miniaturized, power-efficient, light-speed optical front-ends for machine vision, yet the most mature demonstrations remain in the terahertz regime, built from readily fabricated millimeter-scale neurons. Translating D2NNs to the visible range, where nearly all vision pipelines operate, was long blamed on the difficulty of fabricating nanoscale neurons; but even after recent advances removed that barrier, visible-range D2NNs matching their terahertz counterparts remain out of reach. We identify the true obstacle as the thin-layer approximation underlying nearly all D2NN training, which treats each diffractive layer as an infinitely thin mask. It fails not because of the short wavelength, as is commonly assumed, but because the low-refractive-index materials (n approximately 1.3-1.5) used at visible wavelengths require relief structures thick enough that intra-layer diffraction and phase accumulation become significant. To overcome this, we introduce a differentiable beam-propagation ($\partial$BPM) layer that models each element as a finite-thickness volume and propagates light through it during training, keeping the fabrication-compatible height map end-to-end trainable without full-wave simulation in the loop. Across MNIST, Fashion-MNIST, and CIFAR-100 classification and imaging, $\partial$BPM training substantially reduces the design-to-device mismatch, and full-wave FDTD validation raises classification accuracy from 50% to 90% without re-optimization. The $\partial$BPM layer thus offers a scalable, physics-aware bridge between efficient optical neural-network optimization and fabrication-consistent diffractive design.

Bioacoustic datasets from tropical regions remain limited, in part due to the absence of reproducible workflows for aggregating recordings from public archives. We present \textbf{MyGardenBird}, a curated dataset of bird vocalisations representing twelve common species across Peninsular Malaysia and the Indo-Malayan region. Recordings were sourced from Xeno-canto and processed through species-level filtering, manual spectrogram segmentation, and quality control checks. The primary release comprises 7,200 manually validated audio clips (16 kHz, 16-bit PCM mono WAV), balanced at 600 three-second clips per species (6.0 hours total) derived from 1,381 distinct recordings. Metadata includes geospatial coordinates, vocalisation categories, and signal-to-noise ratio (SNR) values (range: 0.83--59.18 dB; mean: 15.80 dB). A supplementary 44.1 kHz version is also provided. To mitigate data leakage, dataset partitions are defined at the source-recording level. Baseline classification experiments using convolutional neural networks on Mel-spectrograms achieved test accuracies of 92--96%, indicating strong interspecies separability. Limitations include reliance on single-annotator curation; however, validation with BirdNET confirmed label consistency. MyGardenBird is openly available at https://doi.org/10.5281/zenodo.20306877 under a CC BY-NC-SA 4.0 licence. Complete preprocessing code accompanies the release to support reproducibility and future expansion.

Reliable polymer identification is essential for ensuring the quality and safety of recycled plastics, yet conventional sorting and spectroscopic techniques often struggle to deliver robust discrimination. Terahertz (THz) spectroscopy offers a promising alternative, providing high-resolution and non-destructive measurements. In this work, we leverage THz signals to classify 12 types of polymers, including pure polymers, multilayer films, commercial blends, and biopolymers. To handle the complexity of these spectral signals, we propose the Multi-Scale Feature Attention Network (MSFAN), a novel deep learning architecture tailored for THz data. The framework integrates feature gating for signal recalibration and multi-scale parallel convolutions to capture diverse frequency patterns. These features are further refined through cross-feature attention and attention pooling, enabling the model to intrinsically highlight the most informative THz regions. MSFAN consistently outperforms state-of-the-art models, reaching a classification accuracy of 85.2%. This study demonstrates the potential of combining THz spectroscopy with deep learning techniques for effective, scalable, and interpretable polymer classification.

Uncrewed aerial vehicles (UAVs) are increasingly considered as aerial platforms capable of providing both sensing and communication services, representing a promising paradigm for intelligent transportation systems. This paper investigates the optimal time allocation for a UAV-enabled integrated sensing and communication (ISaC) system operating in the X-band for vehicular networks. We analyze the trade-off between sensing accuracy and communication performance under practical UAV constraints and fading effects, considering both single-shadowing and double-shadowing channel models. An optimization framework is developed to allocate time between sensing and communication while guaranteeing minimum communication rates and sufficient sensing reliability. Simulation results demonstrate adaptive time allocation strategies, highlighting how UAV-to-ground channel conditions and target distances influence the balance between sensing and communication in smart mobility scenarios.

With the rapid development of virtual reality (VR) and augmented reality (AR), spatial audio recording and reproduction have gained increasing research interest. Higher Order Ambisonics (HOA) stands out for its adaptability to various playback devices and its ability to integrate head orientation. However, current HOA recordings often rely on bulky spherical microphone arrays (SMA), and portable devices like smartphones are limited by array configuration and number of microphones. We propose SHB-AE, a spherical harmonic beamforming based method for Ambisonics encoding using a smartphone microphone array (SPMA). By designing beamformers for each order of spherical harmonic functions based on the array manifold, the method enables Ambisonics encoding and up-scaling. Validation on a real SPMA and its simulated free-field counterpart in noisy and reverberant conditions showed that the method successfully encodes and up-scales Ambisonics up to the fourth order with just four irregularly arranged microphones.

Human Activity Recognition (HAR) using WiFi signals has emerged as a transformative technology for smart homes, healthcare monitoring, security systems, and ambient assisted living. Unlike traditional camera-based systems that raise significant privacy concerns and fail in low-light conditions, or wearable sensors that require user compliance, WiFi-based HAR is non-intrusive, privacy-preserving, cost-effective, and works seamlessly in any lighting condition. This paper presents a comprehensive approach to recognize three distinct human activities: "No Presence" (empty room), "Walking", and "Walking + Arm-waving" using the Wallhack1.8k WiFi spectrogram dataset. We propose three key improvements to address the main challenges in WiFi-based HAR. First, to address high performance variance, we implement ensemble learning with five different CNN architectures (Deep CNN, Wide CNN, MobileNetV2, ResNet50V2, and EfficientNetB0). Second, to address the small dataset size limitation, we apply aggressive data augmentation techniques including time-warping, frequency masking, and noise addition. Third, to evaluate real-world generalization capability, we perform cross-scenario evaluation (training on Line-of-Sight and testing on Non-Line-of-Sight) and cross-antenna evaluation (training on Biquad antenna and testing on PIFA antenna). Our ensemble model achieved a test accuracy of 94.87% on the LOS scenario with Biquad antenna, outperforming the best individual model by 0.66%. Data augmentation improved Random Forest performance from 60% to 95%. Cross-scenario evaluation showed minimal accuracy drops of only 1.37% and 2.07%, demonstrating strong generalization capabilities. The results indicate that the proposed approach is robust, reliable, and suitable for real-world deployment in diverse environments with different hardware configurations.

This paper investigates a multi-user indoor integrated sensing and communication (ISAC) system operating in the terahertz (THz) band, designed for adaptive communication based on gesture recognition. Leveraging gesture tracking through an extended Kalman filter (EKF), the access point (AP) dynamically adjusts resource allocation in response to detected gesture variations, thereby improving sensing accuracy. Based on the gesture recognition results, the AP further updates the communication quality requirements of different users, enabling efficient resource allocation. To this end, an adaptive joint optimization algorithm for power allocation and beamforming is developed to maximize the overall sensing signal-to-interference-plus-noise ratio (SINR) while satisfying the gesture-dependent communication quality of service (QoS) constraints. Simulation results demonstrate that the proposed method effectively responds to gesture dynamics, achieving superior sensing accuracy and communication performance compared with conventional single-variable optimization baselines.

Reliable work zone mapping is important for connected and autonomous vehicles (CAVs) to navigate safely and smoothly through work zone areas. Cone-mounted ultra-wideband (UWB) roadside units (RSU) offer a cost-effective way for work zone layout inference, as roadside anchors and vehicle tags provide direct vehicle-to-infrastructure (V2I) range constraints for work zone geometry reconstruction. However, UWB range estimation is degraded by bursty outliers, non-line-of-sight (NLOS) errors, arbitrary anchor-ordering issues, and vehicle pose uncertainties in practical field deployments. To address these challenges, this study proposes a pose-conditioned, permutation-equivariant predictive denoiser for multi-anchor UWB ranging. The model employs shared anchor-wise temporal prediction to capture range dynamics, symmetric set aggregation to handle unordered and missing anchors, and pose-conditioned residual decoding to incorporate vehicle motion as a geometric prior. A two-stage training strategy first learns prediction from observed ranges, and then fine-tunes the denoiser with NLOS-weighted supervision. The method is evaluated on rare real-world V2I UWB field data collected with a CAV, as well as on controlled large-scale simulation benchmarks for ablative insights. Results show that the proposed method substantially improves range accuracy, cone localization, and work zone geometry reconstruction in challenging NLOS-dominated regimes, remains robust to anchor re-indexing and moderate anchor dropout, and reduces measurement-weighted field MSE by 66.9% relative to the raw input.

In dynamic acoustic environments with time-varying interferers, effective beamforming requires identifying stationary regions over time. The Capon beamformer, a whitened matched filter constrained to maintain unity gain in the desired direction, theoretically relies on the instantaneous ensemble covariance matrix. Practical implementations rely on the batch Capon (or Sample Matrix Inversion), which estimates the sample covariance matrix (SCM) by averaging over a block of snapshots. This practical approach implicitly assumes that the data within the batch window is stationary and can be coherently combined. In non-stationary settings, a batch approach that averages over fixed or excessively long windows fails, as moving interferers smear the SCM and degrade the beamformer's nulling capabilities. To address this, this paper introduces a temporally segmented distortionless response beamformer. Inspired by the segmented least squares method, which fits piecewise polynomials to data while penalizing excessive segmentation to prevent overfitting, the framework extends practical Capon beamforming by incorporating data-driven temporal segmentation. This formulation minimizes output power while dynamically adapting the SCM estimation windows to local stationarity, offering a principled approach to tracking time-varying interferers.

Distributed space antennas using electromagnetic formation flight (EMFF) are a promising architecture for large-aperture, long-life space communication systems. Their feasible aperture, however, is governed by coupled constraints on antenna performance, satellite mass, power generation, coil geometry, and formation-keeping power. This paper proposes a system-level design framework for EMFF-based distributed space antennas. It links phased-array requirements with satellite-level sizing constraints and provides a static grid-based reference for designing feasible apertures under a fixed system mass. Unlike our previous bucket-brigade disturbance-compensation model, the formation-maintenance requirement is incorporated through a control index derived from distributed-control simulations. This index is integrated into an antenna-aperture maximization problem with sizing, power, coil, and sidelobe-envelope constraints. Parametric case studies examine margin magnetic moment, prescribed transmit power, and large inter-satellite spacing. Results show that increasing system mass improves footprint reduction or effective isotropic radiated power only while satellite-level design headroom remains. In direct-to-device cases with 0.15 m spacing, generated-power and coil-geometry constraints dominate the feasible aperture. In the 0.60 m large-spacing case, the required coil burden can exceed satellite-level mass, size, and power capacities, making the design infeasible despite favorable communication performance. The proposed framework enables the design and evaluation of feasible static grid-based EMFF distributed antennas under coupled antenna, satellite, and control constraints.

Robust pedestrian safety is crucial to the next-generation of intelligent transportation systems. Such systems rely on active pedestrian localization and predictive collision alerts. Pedestrian localization can be supported by Ultra-Wideband technology and Bluetooth 6.0, which offer high-precision ranging and low-latency communication, making them promising candidates for vehicular collision warning systems. This paper assesses the localization accuracy of these technologies for pedestrian alerting and benchmarks their performance against Global Navigation Satellite Systems. Experimental evaluations performed in this paper focused on key performance metrics, including localization accuracy and robustness to environmental conditions. Preliminary results suggest that Ultra-Wideband and Bluetooth 6.0 can serve as viable alternatives or complements to Global Navigation Satellite Systems in certain scenarios, improving situational awareness and enabling timely pedestrian alerts.

Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.'' To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5% average accuracy under AWGN and 87.4% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.