Generative Models

Drifting provides a direct route to one-step generative models, but applying it directly to stochastic transition modeling requires multiple samples of the next state conditioned on the same current state. Standard trajectory data, however, typically provide only one realized next state for each observed current state and therefore do not provide an empirical approximation of the corresponding conditional distribution over possible next states. We introduce block-triangular joint drifting, which instead applies a projected drift field to the empirically accessible joint distribution of consecutive states. Importantly, the block-triangular architecture preserves the current-state marginal while making its second component a direct sampler of the conditional distribution of possible next states. The resulting surrogate generates stochastic trajectories with one model evaluation per time step, without auxiliary generative steps between time steps. Numerical experiments demonstrate accurate marginal and trajectory-dependent statistics and favorable accuracy-cost tradeoffs compared with deterministic, diffusion-, flow-, and distillation-based generative surrogate models.

Modern conditional generative models face significant challenges when learning complex covariate dependencies. While sufficient dimension reduction (SDR) provides a principled approach to compress these dependencies, traditional SDR frameworks were not formulated for conditional generation. To bridge this gap, we propose Belted Engression, a unified and architecturally parameter-efficient framework for generative distributional regression. Our approach establishes an end-to-end compress-then-generate paradigm driven by sufficient representation learning, embedding a structural bottleneck into the generative architecture. Theoretically, we prove that the standard SDR condition is equivalent to a law-preserving generative factorization, which is achieved at the global optimum of the population Belted Engression objective. Furthermore, by uncovering a localized Bernstein-type control for the energy-score loss, we establish finite-sample convergence rates that are sharper than those of existing results. We also prove that this belted architecture is strictly smaller, operating with an asymptotically vanishing parameter count relative to the unstructured baseline. Extensive simulations and real-world applications demonstrate that Belted Engression achieves superior distributional prediction and SDR recovery with fewer trainable parameters.

Generative models are increasingly central to many de novo discovery pipelines, in which designs are generated at scale and filtered through virtual screens to determine a set of candidates to experimentally validate. While Bayesian optimization (BO) is a natural fit for this setting, as it uses past evaluations to guide future proposals, the computational overhead required for its sequential decision-making becomes a bottleneck when virtual screens are relatively cheap. We make BO practical in this regime by exploiting the unique combination of a linear model constrained to a spherical domain where high-dimensional latents concentrate. We build off recent work justifying the use of linear surrogates, while deriving nearly closed-form solutions to the surrogate modelling and acquisition problems that exploit spherical symmetry. The result is at least a 100x speedup over state-of-the art baselines, with matching or improved performance across molecular and image generation benchmarks. Altogether, our method makes BO a practical drop-in for de novo pipelines where it was previously too slow to consider.

Generating signals on graphs requires permutation-equivariant models that exhibit stability with respect to relative structural perturbations. While recent graph-aware Schrödinger bridge models incorporate topology information directly into their reference dynamics, it is unclear how perturbations of the graph propagate through these dynamics and affect the resulting generated distributions. In this paper, we analyze the structural stability of graph-aware continuous-time generative models whose drift combines a graph filter with a learned graph neural network. We derive explicit Wasserstein stability bounds that quantify the effect of relative graph perturbations on the generated distributions. Motivated by these bounds, we introduce a principled framework for designing stable graph filters that preserve the smoothing behavior of graph heat diffusion, while boosting structural stability. Experiments on synthetic and fMRI signals show our stable filters enhance structural robustness while matching or exceeding the generative quality of the heat equation baseline.

Self-motion manifold (SMM) characterizes the geometric structure of the infinite inverse kinematic solutions set of a redundant manipulator at a fixed end-effector pose, and its efficient recovery underpins feasible and global optimal motion planning. Existing methods such as null-space continuation and learning-based methods are formulated around the assumption that an SMM is a curve, and do not extend to higher redundancy orders. We instead adopt a probabilistic view: SMMs are the support of the conditional posterior over configurations given a target pose, so that recovering it reduces to sampling from a learned distribution and separating its disjoint components by clustering. The formulation is independent of the manifold dimension and requires no architectural change as the redundancy order grows. In this work, we demonstrate that our method can approximate 1-D SMMs with performance comparable to the latest null-space continuation and learning-based approach, and that it is the first method capable of approximating highly redundant 4-D SMMs in a 7R manipulator for position tasks. Project website: \href{https://github.com/accuracy-maker/high-dimenstional-self-motion-manifold-approximation}{https://github.com/accuracy-maker/high-dimenstional-self-motion-manifold-approximation}

Open-source video generative models ship almost exclusively as PyTorch/CUDA reference implementations. This leaves Cloud TPU pods without a production-ready inference path, despite offering large, cost-effective accelerator memory pools ideal for long-sequence spatiotemporal attention. We present vidax, an open-source JAX/Flax inference engine and zero-copy PyTorch-to-JAX weight translator for modern video generation architectures. vidax covers a diverse set of spatiotemporal models --- including Diffusion Transformers, omnimodal Mixture-of-Transformers, 3D VAEs, text encoders, and native samplers --- with zero PyTorch dependency in the execution path. The framework unifies 1D tensor parallelism with DeepSpeed-Ulysses sequence parallelism on a single JAX sharding mesh, integrates TPU flash-attention kernels, and implements per-layer weight offloading to support reference resolutions that exceed single-device memory. We benchmark compile times, latency, and peak memory utilization on TPU v4-8 hardware, and document real-world numerical bugs surfaced during checkpoint translation. vidax is released open-source as a baseline for JAX and TPU video generation research.

Generative modeling of time-dependent data is typically formulated on a discrete temporal grid, restricting supervision to the observed timestamps in the training data. We instead frame generation as continuous-time evolution on a learned data manifold. To this end, we leverage pretrained score-based models as geometric priors and learn a vector field that evolves data along score-induced interpolation paths. Because these dynamics follow transitions that respect the geometry learned by the score model, they support generation at arbitrary timestamps and temporal super-resolution beyond the discretization of the training data. Moreover, this geometric formulation allows us to train the vector field simulation-free through a regression objective. To improve long-horizon rollout robustness, we introduce an objective that promotes path-relative transverse exponential stability. While motivated by stability theory, it admits a practical interpretation as denoising score matching transverse to the interpolation path. Further, we extend the framework to a probabilistic setting that models a distribution over plausible future trajectories. We demonstrate the method on natural video and scientific dynamical data, including temporal super-resolution, PDE-based spatiotemporal fields, and molecular dynamics. Our results show that score-based priors provide a strong foundation for learning stochastic continuous-time generative dynamics.

Traversability prediction is a critical component of autonomous navigation in unstructured environments, where complex and uncertain robot-terrain interactions pose significant challenges such as traction loss and dynamic instability. Despite recent progress in learning-based traversability prediction, these methods often fail to adapt to novel terrains. Even when adaptation is achieved, retaining experience from previously trained environments remains a challenge, a problem known as catastrophic forgetting. To address this challenge, we propose a continual learning framework for traversability prediction that incrementally adapts to new terrains using a generative experience recall model. A key virtue of the proposed framework is two folds: i) retain prior experience without storing past data; and ii) incorporate the uncertainty of the generated samples from the recall model, enabling uncertainty-aware adaptation. Real-world experiments with a skid-steering robot validate the effectiveness of the proposed framework, demonstrating its ability to adapt across a series of diverse environments while mitigating catastrophic forgetting.

This letter presents a unified formulation and a controlled numerical comparison of generative-model approaches to the nonlinear filtering problem. Under this formulation the analysis step is realized by a transport of the forecast distribution to the posterior, the approaches differing only in how that transport is selected and learned. We derive three new filters, based on stochastic interpolants, their deterministic flow-matching limit, and Schrödinger bridges realized through forward--backward SDEs. We develop a two-stage tuning procedure that separates the training of the generative model from its online refinement. The resulting methods are compared against the optimal transport filter (OTF), the Knothe--Rosenblatt filter (KRF), the sequential importance resampling (SIR) particle filter and the ensemble Kalman filter (EnKF), in terms of accuracy, computational time, and sensitivity to ensemble size and state dimension. The results indicate that every generative filter resolves multimodal posteriors that the EnKF and SIR do not, that no single generative framework dominates, the preferred method being set by the available online budget and ensemble size, and that the filters differ in the regularity of the particle trajectories they produce.

What did an ancestral bird species sound like? Existing ancestral state reconstruction methods can infer low-dimensional traits such as morphological characters at internal nodes of a phylogenetic tree, but no one has tried to produce rich perceptual signals such as audio. Some of the challenges include inferred representations that are either too low-dimensional to decode or lie in non-generative feature spaces, so no method to date can produce ancestral audio. We introduce the first framework that generates plausible ancestral vocalizations. Our pipeline encodes bird recordings into a VAE latent space, learns a low-dimensional trait projection aligned with phylogenetic distances, performs ancestral inference in this trait space, and recovers decodable latents through an anchored inverse lift before emitting novel waveforms for each ancestral node. Because the entire pipeline stays within a decodable latent space, every internal node receives a genuinely new audio output representing plausible intermediate ancestral sounds unavailable to retrieval-based alternatives. Experiments on two phylogenetically distant bird clades, 21-species Tyrannidae and 19-species Paridae, show that our method is the only approach that simultaneously achieves genuine generation, phylogenetic consistency, and naturalistic audio quality across both datasets.

Drifting models offer a promising route to faster generative AI: they perform gradual transport during training, while generating new samples in a single step. This paper asks whether the underlying drifting process can converge rapidly to a target distribution under ideal conditions, before finite-data or optimization effects are introduced. We show that its convergence rate depends critically on how it handles spatial scale. With a single fixed resolution, fine-scale features of the target can become nearly invisible, leading to extremely slow convergence. We introduce a multihead approach that combines scale-normalized information across a continuum of resolutions. We prove that this multihead approach restores exponential convergence near standard reference distributions. These results identify fixed resolution as a key bottleneck and provide a simple route to faster one-step generative models.

Meeting continuation requires tracking the agenda, speaker roles, participant intentions, and disagreement across long multi-party discussions. We introduce the Meeting Dynamic Forecasting Benchmark (MDFB), constructed from 2,207 real-world meetings and 24,794 future-facing queries. Given a transcript prefix and an active question, a model generates a plausible multi-turn continuation in one call. We evaluate utility---progress toward the question---and human-likeness---plausible conversational flow and role consistency---without requiring exact reproduction of the observed future. We further present GLARE, an adaptation of adversarial imitation learning to conditional language generation. A discriminator ranks the observed continuation above samples from the current actor, and its score supplies a KL-regularized policy reward; retraining on current-policy negatives allows the reward landscape to evolve with the actor. GLARE attains average human-evaluated win rates of 0.66 on utility and 0.70 on human-likeness, outperforming SFT and SPIN while remaining below the observed human continuation. We also demonstrate MDFB as a social reasoning arena for comparing general-purpose models, including closed-source systems, through reference-assisted judgments. Together, these studies illustrate the benchmark's use for both task-specific learning and output-based evaluation of meeting behavior.

Beam-induced background (BIB) from muon decay products will be an overwhelming and unavoidable background at a future Muon Collider. In order to develop robust event reconstruction algorithms, we need large amounts of accurate BIB simulation to test on. BIB simulation is currently compute-limited: the simulated sample presently used for BIB overlay, which statistically represents approximately $10\%$ of a single unique event's worth of simulated BIB, requires on the order of $10^6$ HS23$\cdot$hours to generate and occupies approximately $100$ GB on disk. In this work, we develop the first machine learning models for fast BIB generation in tracking detectors. We consider two classes of architectures: a slower but higher-fidelity tabular diffusion model, and a faster but lower fidelity circular spline flow model. We find that both classes of architectures produce BIB hits and tracks that closely resemble those of available full simulation hits and tracks, and that the machine learning models can produce BIB in over an order of magnitude less time than what is needed to produce full simulation BIB. We release the model weights with the paper so that the Muon Collider community can use these fast BIB hits for future R&D.

We provide methods for calculating the robustness of the predictions of two types of generative classifiers whose underlying distribution is a Probabilistic Graphical Model (PGM): naive Bayes classifiers and generative forests (a probabilistic extension of random forests). Following the paradigm of robustness quantification, we define the robustness of a prediction as the extent to which the distribution of the classifier can be perturbed without changing this prediction. We consider perturbations obtained by varying the local models of the PGMs within general neighborhoods and focus in particular on epsilon-contamination, total variation distance and chi-squared divergence balls. We test our methods on benchmark datasets, demonstrate that the robustness value of a prediction serves as an indicator for its trustworthiness and compare our approach with other such indicators.

Accurate modelling of illumination is central to realistic image synthesis and scene understanding. Yet, there is little exploration into whether image generative models are good at this task or whether physical plausibility remains a key challenge for them. Clearly, significant progress has been made in realistic image synthesis, but do models truly understand lighting in a physically accurate manner? To answer this question, this work proposes a benchmark to assess the lighting understanding and harmonisation capabilities of generative models. Our key insight is that evaluating lighting understanding for such models only requires testing how well they insert novel objects into real photographs whilst maintaining consistent illumination. To do so, we use a multi-illumination dataset with images containing simple objects serving as ``light probes'', and prompt models to inpaint the same object onto the original image, then compare the generated results against the ground-truth light probes. We then estimate the lighting direction, colour and radiance distribution from the inpainted probes, providing a quantitative measure of illumination accuracy and photometric realism. Our work establishes a scalable evaluation protocol to systematically assess how well generative models capture and reproduce real-world lighting, offering a foundation for benchmarking the photometric accuracy of any future models. All code and data are available at https://lvsn.github.io/SheddingLight/ .

Generative Marginalization Models (MaMs) have been recently introduced as efficient neural sampling models for any-order autoregressive modelling of discrete distributions. By learning both the marginal and conditional probabilities of a persistent-block Gibbs sampler, MaMs enable fast posterior evaluation with a single neural network forward pass. While prior work has considered MaMs to be distinct from Generative Flow Networks (GFlowNets), a well-established paradigm for inference in discrete stochastic models, we show that they are equivalent. Then, we also extend MaMs' sampling strategy to non-autoregressive generative processes. In particular, we describe an automatic criterion for full-state rejuvenation of the Gibbs sampler, derived from the Gelman-Rubin statistic, which plays a key role in speeding up learning convergence. Our experiments show that our method, called Particle GFlowNets, markedly accelerates training in large combinatorial spaces.

Molecule generation has emerged as a powerful computational tool for de novo drug design, enabling the exploration of chemical space beyond the limits of conventional virtual screening. The field has progressed rapidly, driven by advances in molecular representations, generative architectures, and target-aware modeling strategies. However, existing reviews typically address specific model families or application scenarios in isolation, rather than offering an integrated perspective on how these components collectively form a coherent generation workflow. In this review, we present a comprehensive evaluation of molecule generation models for de novo drug design, covering 82 methods across five deep generative frameworks, including recurrent neural network (RNN)- and Transformer-based models, variational autoencoders (VAEs), generative adversarial networks (GANs), flow-based models, and diffusion models. We first summarize widely used benchmarks and molecular representations, and then examine the methodological principles underlying both general and pocket-conditioned generation. A central contribution of this work is a systematic synthesis and comparative analysis of reported performance across commonly used benchmarks and evaluation metrics. We also summarize representative experimentally validated case studies. Looking ahead, we discuss future directions in standardized 3D data, interaction-aware generation, receptor flexibility, and multi-objective molecular design, with the aim of improving the reliability and experimental relevance of molecule generation. All collected benchmark resources, evaluation metrics, and model references are provided in a publicly accessible repository at https://github.com/JacklinGroup/molecule-generation-review.

Recent advances in Intrinsic Image Decomposition (IID) have increasingly relied on generative models. However, progress remains limited by three key challenges: (a) insufficient physical consistency, (b) high computational cost at inference time, and (c) limited generalization capabilities. In this work, we show that latent bridge matching (LBM) effectively addresses these limitations for albedo estimation. We introduce a novel LBM-based architecture that enforces physical consistency through a pixel reconstruction loss, benefits from the inherent efficiency of LBM low-cost inference, and improves generalization across diverse datasets by incorporating a shading conditioning. In this extended version, we additionally show that conditioning the shading estimator itself on the predicted albedo further improves reconstruction fidelity, and we benchmark our best model against stateof-the-art IID methods across five real and synthetic datasets.

Crystal structure prediction (CSP) is fundamental to computational materials discovery. Generative models including CDVAE, DiffCSP, FlowMM, and CrystalFlow learn stable-crystal distributions directly, but diffusion and flow-matching inference requires tens to thousands of sequential network evaluations per candidate. We introduce uFlowCSP, a MeanFlow-based CSP model that learns the average, rather than instantaneous, probability-flow velocity. It generates a complete structure in one to five evaluations, delivering 5x-58x faster inference with equal or better performance. A chemistry- and symmetry-aware Transformer uses canonical atom ordering, global composition, and per-token chemistry embeddings. A coarse crystal-system token is used only during training; it provides additive gains, particularly improving space-group agreement despite being absent at inference, which remains formula-only. On MP-20 with 20 candidates per target, one step matches CrystalFlow (78.38% vs. 78.34%) with 100x fewer evaluations and about 10x lower wall-clock time. Five steps reach 83.64%, exceeding CrystalFlow (78.34% at 2,000 evaluations) and DiffCSP (77.93% at about 20,000), while using 20x fewer evaluations. uFlowCSP generates 10,000 structures in 0.39-1.31 minutes, versus 6.5 for CrystalFlow and 76.1 for DiffCSP. Under CSPBench's energy-ranked top-five structure-and-space-group criterion, five-step uFlowCSP reaches 72%/72%/65% structure, space-group, and consensus match rates. CrystalFlow reaches 78%/73%/68% at 100 steps but falls to 49%/32%/31% at five. Thus, uFlowCSP improves accuracy per network evaluation, not merely peak accuracy.

The digitization of healthcare has generated vast, longitudinal, and multimodal patient records over a lifetime, yet fully exploiting these data to represent and predict patient state trajectories remains a critical challenge. Current AI models often struggle to capture the complex, irregular temporal dynamics and inherent stochasticity of real-world multimodal patient data. Existing AI approaches for modeling longitudinal patient records are predominantly discriminative, limited to a few modalities, constrained by closed categorical vocabularies, treating time as a monotonic inductive bias, or they are limited in forecasting future patient states. We introduce NOAH, a time-aware, task-agnostic, generative transformer model representing and forecasting the full multimodal patient journey. NOAH features a novel bidirectional time integration and a variational latent space to capture the continuous evolution of patient states and the stochasticity of clinical trajectories. Built from over 559 million clinical events from 431,000 hospital visits of 299,000 patients across the MIMIC dataset family, NOAH natively processes medical images, time-series and numeric signals, categorical events, as well as structured and unstructured clinical records. NOAH is the first truly holistic generative model in its field, enabling autoregressive forecasting with optional time control, zero-shot classification, and counterfactual intervention simulation. It generates highly informative and predictive patient state representations that demonstrate strong performance in probing for clinical outcomes, 15 ICD chapters, and 29 comorbidities, as well as in time-to-event prediction. Seamlessly handling diverse modalities and complex temporal dynamics, NOAH provides a versatile, task-agnostic, scalable foundation for intelligent predictive systems in personalized clinical care and digital medicine.

Travel survey data are essential for transportation planning and travel behavior analysis, yet collecting large-scale representative samples is costly and time-consuming. A practical alternative is to generate synthetic survey records from a few-shot sample. However, such samples provide incomplete coverage of heterogeneous traveler groups and insufficient evidence for recovering the complex dependencies between demographic characteristics and travel behavior. Existing approaches have complementary limitations. Probabilistic generative models such as Bayesian networks (BNs) offer explicit distributional control, but structures learned from few-shot samples may omit meaningful dependencies or retain spurious ones. Large language models (LLMs) can help address these difficulties in BN structure learning by providing behavioral knowledge that complements the limited statistical evidence. We therefore propose LEBGen, an LLM-enhanced BN framework that uses this knowledge to refine network structure for few-shot travel survey data generation. Specifically, the LLM first identifies traveler personas from demographic attribute and travel behavior statistics, then recovers dependencies missed by the persona-augmented BN structure and prune spurious ones. The refined BN is parameterized exclusively from the observed data to generate synthetic records. Under a 2% few-shot setting on the 2022 Hong Kong Travel Characteristics Survey, LEBGen reduces the mean marginal Jensen-Shannon divergence from 0.0671 to 0.0091 and the mean absolute Cramer's V error by 14.3% over the best-performing baseline, substantially improving both distributional and dependency fidelity.

Diffusion models have shown remarkable performance on diverse generation tasks. Recent work finds that imposing representation alignment on the hidden states of diffusion networks can both facilitate training convergence and enhance sampling quality, yet the mechanism driving this synergy remains insufficiently understood. In this paper, we investigate the connection between self-supervised spectral representation learning and diffusion generative models through a shared perspective on perturbation kernels. On the diffusion side, samples (e.g., images, videos) are produced by reversing a stochastic noise-injection process specified by Gaussian kernels; on the spectral representation side, spectral embeddings emerge from contrasting positive and negative relations induced by random perturbation kernels. Motivated by this, we propose a self-supervised spectral representation alignment method to facilitate diffusion model training. In addition, we clarify how joint spectral learning can benefit diffusion training from a geometric perspective. Furthermore, we find that the optimization of the spectral alignment objective is in an equivalent form of diffusion score distillation in the representation space. Building on these findings, we integrate a spectral regularizer into diffusion training objectives to improve the performance of diffusion models on multiple datasets. Experiments across images and 3D point clouds show consistent gains in generation quality. Code is released at https://github.com/yuehaowang/spectral-reg-diffusion.

We introduce DF26, a novel benchmark for detecting AI-generated videos containing fully synthetic clips produced by recent text-to-video and image-to-video models. The videos capture single-person public-speaking scenarios, spanning direct-to-camera recordings, official statements, and studio interviews - 271 real and 2,420 synthetic videos generated by seven modern video models. The study on DF26 shows that human performance in detecting AI-generated videos, as well as state-of-the-art deepfake detectors, is close to random chance. Our results highlight the limitations of current evaluation protocols and motivate the need for benchmarks that explicitly measure robustness to modern generative model distribution shifts.

The rapid evolution of video generation has shifted the paradigm from pure text-driven to multi-conditional controllable generation, with reference images now widely adopted as conditional inputs to achieve superior spatiotemporal consistency. While these reference images serve as powerful visual anchors that significantly enhance controllability, their impact on safety remains largely unexplored. In this work, we reveal the visual anchoring effect: by enforcing consistency, the mechanism prevents the generated content from drifting away from the original harmful intent, thereby eliminating the model's natural safety escape route from harmful to benign content. Consequently, visual anchors inherently increase the safety risk---this is the price of consistency. Building on this insight, we propose Decoupling Intent via Visual Anchors (DIVA), a training-free multimodal jailbreak framework for video generation that exploits this vulnerability. DIVA decouples harmful intent into a static visual anchor image and a dynamic motion text prompt, and employs dual-criteria selection to balance attack stealthiness with semantic preservation. Extensive experiments across various leading commercial platforms and mainstream open-source video generation models demonstrate that DIVA achieves a substantially higher Attack Success Rate than existing text-only methods. To facilitate future research, we additionally contribute TI2VSafetyBench, the first safety benchmark for multi-conditional video generation.

Synthetic medical time-series generation can alleviate data scarcity and support the development of reliable clinical prediction models. However, existing methods mainly focus on matching the overall distribution and temporal dynamics of real data, which does not necessarily ensure strong downstream utility on imbalanced medical datasets. Clinically informative patterns often occur at heterogeneous temporal scales, while rare minority-class characteristics can be obscured by dominant population patterns. To address these challenges, we propose MedFlow, a class-aware multi-scale flow matching framework for medical time-series synthesis. MedFlow employs a vector-quantized multi-scale tokenizer to represent medical sequences at complementary temporal resolutions, capturing both coarse clinical trends and fine-grained dynamics. We further introduce Token Marginal Guidance, which incorporates class-conditional token statistics directly into the flow matching process to steer generation toward class-specific regions of the learned tokens. This mechanism strengthens minority-class patterns, while preserving the global and tail distributions of real data. Experiments on four public datasets covering electronic health records, EEG, and ECG signals demonstrate that MedFlow consistently outperforms recent state-of-the-art diffusion-based baselines across downstream prediction tasks. On average, it improves AUPRC by 5.8%, reduces Context-FID by 88.6%, and achieves 3.8$\times$ higher sampling throughput.

Current conditioned generative models heavily rely on score functions for guidance during training. When the generative model is a diffusion process with a singular diffusion coefficient and the underlying (conditional) densities either do not exist or are not smooth, we use causal optimal transport to define \emph{approximate} loss functions that identify a minimum-entropy control for guidance under minimal assumptions. Our approach relies on causal optimal transport and its characterization through the predictable representation property of (conditioned) diffusion processes whose associated martingale problem is well posed, à la Üstünel.

Mirrors are common in real-world images, yet producing geometrically consistent reflections with generative models remains challenging. Unlike most objects, mirror appearance depends on scene geometry and viewpoint, making it hard to synthesize using learned appearance priors alone. We address this in the mirror inpainting setting, where the scene is fixed and only the mirror region is generated. Our key insight is that much mirror content is geometrically constrained by the visible scene and need not be hallucinated. We estimate scene geometry and project visible content into the mirror to recover reflection regions determined by geometry. A generative model then completes the mirror region via a two-mask diffusion strategy balancing geometric constraints with the model's learned priors, reducing projection artifacts and improving reflection consistency. The method is training-free and applicable to complex real-world scenes. We evaluate on MirrorBench-V2 (synthetic) and real images. Using standard and geometry-aware metrics, we show that explicitly using scene geometry improves consistency.

While deep generative models offer new opportunities for medical image synthesis and data sharing, their ability to memorize and reproduce training samples raises serious concerns about patient confidentiality. Detecting such memorization at scale remains challenging: traditional pixel-based metrics are sensitive to generation artifacts, whereas generic embedding-based metrics often lack the anatomical sensitivity required for medical data. To address this challenge, we introduce DeepSSIM++, a self-supervised similarity metric for scalable memorization auditing in medical generative models. By leveraging multi-scale feature aggregation and anatomy-preserving augmentations, DeepSSIM++ learns an embedding space where cosine similarity approximates the Structural Similarity Index (SSIM), eliminating the need for exact pixel-level registration. Compared with state-of-the-art baselines, DeepSSIM++ achieves an average Macro F1 improvement of 33 percentage points under ideal alignment and 46 percentage points under realistic spatial and intensity perturbations. Furthermore, it accelerates large-scale similarity computation by several orders of magnitude compared with analytical SSIM. By combining anatomical sensitivity and computational efficiency, DeepSSIM++ provides an open-source tool for scalable memorization auditing in medical generative AI. Code and data are publicly available at: https://github.com/brAIn-science/DeepSSIM.

Answering what-if queries about a scene with a VLM usually means injecting the assumption as text or repainting the scene with a generative model. We instead move the edit to the representation level, before the model input. The image is abstracted into a set of object-level tokens, and the original image never enters the VLM. This design rests on an open question: when do frozen VLMs actually respond to such token edits? We introduce an answer-key-free protocol: no post-edit answer is annotated. It scores edits whose answers are logically determined, and audits itself by reversing each scoreable choice. The protocol reveals three structures. The response is not free: explicit edit teaching, not ordinary VQA training, produces it in dense scenes and multiplies it in sparse ones, on all three operations. Once on, it is governed by token cleanliness and density, with deployable detector+segmenter tokens competitive with the oracle and outperforming it on VRSBench. And reading is a separable axis: the image-free token route preserves 92-96% of a matched patch-token baseline's free-text VQA, and the answers measurably depend on the tokens. The response, cleanliness, and reading structures are sign-preserved across two remote-sensing datasets (iSAID, VRSBench) and three frozen LM backbones. We release the probe generator, records, judge logs, and code.

Predicting storm surge induced by landfalling tropical cyclones is crucial for flood mitigation and coastal risk management. Traditionally, physics-based numerical models simulate storm surge by solving the Navier--Stokes equations using numerical methods, but these simulations are computationally expensive. Generative models are promising for storm surge emulation because they can generate diverse realizations rather than producing a single deterministic prediction. However, their use for storm surge emulation remains largely unexplored. In this paper, we leverage diffusion models for storm surge surrogate modeling, combining a baseline prediction stage with conditional generation to provide a more interpretable modeling framework. We develop SurgeGen, a two-stage generative framework for generating storm surge scenarios conditioned on hypothetical storms with parameters defined in a continuous space. First, a baseline model produces a coarse estimate of the storm surge height. This estimate then conditions a diffusion model, which generates refined storm surge scenarios that better capture spatial patterns and variability. We demonstrate that our approach can generate realistic and diverse storm surge scenarios under conditions both within and outside the training distribution.

Proteins are fundamental to biological processes, with their function determined by the complex interplay between the amino acid sequence and the three-dimensional structure. Developing generative models capable of understanding this intrinsically multi-modal relationship is crucial for fields like drug discovery and protein engineering. Existing models often rely on a multi-stage training process where autoencoders that tokenize data into latent representations are trained in a first stage. Secondly, a generative model is trained on the latent representation of the autoencoder(s), i.e., generative modeling in a latent space. We hypothesize that this multi-stage training is not necessary to obtain performant co-design models and thus present SimpleDesign, an effective multi-modal protein design model trained directly in the data space. SimpleDesign leverages a single-stage end-to-end objective that combines discrete cross-entropy for sequences and a regression objective for structures. In order to effectively model the difference in sequence and structure modalities, we develop a Mixture-of-Transformer architecture that allows modality-specific processing while keeping global self-attention over both modalities. We train SimpleDesign on over 2M sequence-structure pairs achieving strong performance across co-design and unconditional sequence/structure generation benchmarks.

Power-outage planning requires scenarios before an event occurs. These scenarios must represent uncertainty in magnitude, timing, and duration while preserving temporal dependence. However, severe events are rare, and data from any single region contain few examples of extreme outage and restoration patterns. To address this challenge, we introduce OutageDiT, a foundation model for generating seven-day outage trajectories at quarter-hour resolution, trained on outage and weather records across the United States. Specifically, a condition encoder processes the historical context and known future covariates once per forecast, and a shallow flow decoder reuses the resulting horizon-aligned states to generate complete trajectories. The resulting samples support point forecasting, uncertainty quantification, and conditional event simulation within one deep generative model. Across outage forecasting benchmarks, OutageDiT improves forecast accuracy and scenario quality over strong baselines and supports zero-shot transfer to held-out regions. Together, these results position conditional outage simulation as a bridge from outage forecasting to operational planning under uncertainty.

Flow Matching has emerged as a leading framework for generative modeling, powering state-of-the-art systems such as FLUX and Stable Diffusion 3.5. However, the iterative nature of its ODE-based sampling process creates a fundamental efficiency bottleneck: the quality of generated samples is highly sensitive to the choice of step-sizes, and current models typically require 20 to 30 steps for good quality. In this work, we propose two lightweight, training-free algorithms, CAT-OV and CAT-OT that adapt step-sizes at inference time based on a novel connection between Flow Matching sampling and gradient flow. Our algorithms are computed efficiently by not requiring additional neural function evaluations. Specifically, CAT-OT estimates curvature over time via a finite-difference approximation of the time-derivative of the vector field, while CAT-OV approximates curvature over the state space via a gradient of the vector field. Under suitable conditions, both methods have truncation error bounds of constant order. Empirically, CAT-OV and CAT-OT outperform existing step-size heuristics in image quality metrics across four text- to-image Flow Matching models, reducing the number of generation steps required to reach comparable quality by up to 40%.

The ability of AI systems to improve their behavior during deployment is becoming increasingly important. As inference moves beyond the static execution of a fixed trained model, a growing body of work studies how models can refine their behavior on the fly by exploiting test-time information and additional computation. These developments have largely evolved along two directions: methods that modify the model's state using test-time signals, and methods that improve predictions through extra inference-time resources such as more sampling and tool use. However, these directions are often studied in separate communities with different terminology, making their connections harder to see. In this survey, we present feedback-driven Test-Time Intelligence (TTI) as a unified perspective for understanding such deployment-time improvement. We use this view to relate test-time adaptation, test-time learning, and test-time scaling, highlighting both their distinctions and their growing overlap in hybrid systems. This unified framework helps connect previously fragmented ideas and provides a clearer conceptual foundation for studying inference-time self-improvement. We review major methodological paradigms, representative applications, and open challenges across vision, language, multimodal learning, generative models, robotics, and healthcare. Our goal is to provide a coherent foundation and research roadmap for the study of self-improving AI systems at test time.

Traditional network models from network science, such as the Erdos-Renyi and configuration models, generate random networks that reproduce few selected topological properties observed in real-world networks. Deep graph generative models emerge as a data-driven approach, leveraging deep neural network architectures to learn complex structural distributions directly from real-world networks to generate more realistic synthetic networks. Because real social contact networks cannot be shared due to privacy risks, synthetic networks serve as an alternative for developing and evaluating epidemic mitigation strategies. In this work, we evaluate deep graph generative models as well as the configuration from a network science perspective by assessing both the topological similarity between generated and real-world networks and their utility in identifying effective node immunization strategies to sup- press epidemic/misinformation spreading. It is found that two deep graph generative models produce synthetic networks that closely resemble the structural properties of real-world networks, enabling them to identify effective immunization strategies.

Sampling from distributions conditioned on desired semantic properties is an emerging challenge in modern generative modeling. Metropolis-Hastings (MH) provides a principled route to conditional sampling, but requires access to exact pointwise target-density evaluations, which are not available in generative settings. Meanwhile, pairwise comparisons by humans or model "judge" are highly accessible and have proved valuable across diverse applications. We introduce Pref-MH, a general exact MH sampler for judge-induced conditional distributions using only stochastic binary pairwise comparisons. Our key observation is that the MH unnormalized density ratio matches the preference odds of the Bradley-Terry (BT) choice model. The central challenge is that while MH requires precise ratio computation, BT judges provide only sampled binary feedback. To this end, we develop a valid accept/reject rule whose resulting Markov chain provably converges to the target distribution. We further show that, for a fixed proposal kernel and budget, Pref-MH is optimal in the Peskun-Tierney sense among this class of exact reversible acceptance rules. Experiments on text generation and molecular design with LLM judges, as well as image generation with VLM judges, demonstrate that Pref-MH provides a practical and flexible approach to conditional sampling when comparative feedback is relatively easy to obtain.

Generative models for implied volatility surfaces must produce outputs that satisfy static no-arbitrage constraints. We study these constraints in latent space. For a fixed generator, we assign each latent code a scalar margin determined by the no-arbitrage conditions of the generated surface. The codes with nonnegative margin form the admissible latent set. We establish conditions under which strictly admissible codes remain admissible under small perturbations and the boundary of the admissible set is characterized by zero margin. For regular boundary components, we formulate a level-set equation whose local dynamics are directed toward the zero-margin set. The analysis treats the generator as a map from latent variables to surfaces and is therefore not restricted to a particular architecture. It applies to variational autoencoders, generative adversarial networks, and other generative models with a deterministic realization map. Numerical tests recover known boundaries in analytic examples. Experiments with a variational autoencoder trained on Heston surfaces show that similar reconstruction errors can correspond to different admissible regions and that the latent prior may be concentrated inside such a region. The computed boundary can also be used to modify latent codes that generate violating surfaces.

Modern explicit-time generative models, such as Flow Matching [Lipman et al., 2023] and Rectified Flow [Liu et al., 2023], are typically derived top-down via Optimal Transport and the continuity equation. This standard Eulerian approach focuses on the macroscopic transport of probability mass. In this paper, we present an alternative, bottom-up mechanical derivation grounded in a Lagrangian (particle-centric) perspective. By analyzing the local Taylor expansion of a continuous denoiser, we motivate a strict invariance condition required for optimal, singlestep generation: the conservation of target identity. Enforcing this condition yields a governing quasi-linear advection Partial Differential Equation (PDE). We demonstrate that solving this PDE via the Method of Characteristics analytically yields the straight-line trajectories of Flow Matching. This geometric perspective isolates the Jacobian of the denoiser as the primary source of trajectory curvature, providing a direct mathematical explanation for why straight-line flows enable massive step sizes, and why empirical models require distillation to flatten intersecting characteristics.

Generative models have become central across science and industry, from image and text synthesis to the design of molecules and materials. Quantum generative models are considered one of the most promising applications for quantum computers, since a quantum circuit naturally produces samples from the distribution it encodes, and for suitable circuits that distribution is believed to be hard for any classical computer to reproduce. A leading strategy trains these models on a classical computer and reserves the quantum device for generating samples at deployment. This is possible when the training loss can be evaluated on a classical computer. A prime example is the maximum mean discrepancy (MMD$^2$), a moment-matching loss that compares the model and the data through their Pauli-$Z$ correlations. Research so far has asked whether such models can be trained and whether their sampling is hard; whether minimizing such an objective yields a model that generalizes, rather than one that merely reproduces the training statistics, remains poorly understood. We benchmark a broad set of quantum and classical generative models by direct sampling and show that models trained with a moment-matching loss generally show worse generalization than the likelihood-trained models. We show this on two application-inspired datasets: first a cardinality-constrained dataset at up to $30$ qubits and second a dataset of genomic single-nucleotide variants, whose valid set is the observed data. These results indicate that a converged moment-matching loss is not a reliable measure of generalization, and that train-classical, deploy-quantum workflows will need approaches that target generalization directly, leaving open whether better training objectives suffice or whether the model architectures themselves must change.

When do text embeddings work as inputs to empirical analysis? Their use rests on an assumption: that we can trade text for its low-dimensional embedding, and lose little in doing so. I make that assumption precise under a generative model in which documents are mixtures of latent topics. I study two uses---clustering units in embedding space and controlling for high-dimensional text. A cluster of embeddings is a set of documents with similar topic mixtures; controlling for the embedding is equivalent to controlling for the topic mixture, so validity reduces to whether that mixture captures the confounding. In an application to 363 U.S. metropolitan areas, embedding-based clusters of LLM-generated economic descriptions recover interpretable economic archetypes and separate local employment dynamics more sharply than clustering on model residuals, or on a curated set of industry and demographic covariates.

Cross-lingual aspect-based sentiment analysis (ABSA) transfers knowledge from a source language with annotated data to a target language, enabling fine-grained sentiment analysis without annotated target-language data. While monolingual ABSA has seen significant progress, cross-lingual ABSA remains underexplored, especially for complex tasks involving multiple sentiment elements like target-aspect-sentiment detection (TASD). In this paper, we propose a novel SeqLab framework that enhances cross-lingual ABSA using a sequence-to-sequence model with an auxiliary sequence-labelling task performed by the encoder, enhancing aspect term recognition and sentiment predictions. Additionally, we incorporate aspect-code switching (ACS), a translation-based technique that swaps aspect terms between source and translated sentences, generating additional training data to enhance the model's cross-lingual understanding. We evaluate our approach across eleven languages, three domains, and two backbone models, surpassing previous state-of-the-art results for the commonly studied E2E-ABSA task. Unlike most prior work that relies solely on English as the source language, we systematically assess different source-target language pairs and extend our evaluation to the more challenging, yet underexplored TASD task in cross-lingual settings. Finally, we provide a detailed error analysis highlighting key challenges and limitations.

Understanding which training samples influence a generated image is an important problem in generative modeling. In flow matching, training samples influence the generated image through the velocity field along the generation trajectory. Removing samples to examine their counterfactual influence changes the velocity field, and the resulting effect on the final image depends on how the change propagates through the trajectory. Consequently, local changes in the velocity field do not necessarily predict the final counterfactual effect. This work investigates attribution in flow-matching models through a hybrid analytical--learned approach, and uses it to derive trajectory-based attribution scores at the cluster level. We evaluate these attribution scores using independently retrained leave-one-cluster-out (LOCO) models, and compare with several attribution baselines using two different flow-matching latent spaces. Our experiments show that semantic similarity constitutes a strong baseline, while the closed-form trajectory-based attribution is competitive in some metrics without requiring counterfactual retraining or model gradients. Our results show that attribution in flow matching depends not only on semantic similarity to training samples, but also on the latent representation, trajectory dynamics, and how influence is propagated to the final output.

To mitigate the time complexity of generative models, one-step generative models have recently emerged through direct mapping from noise to data in a single forward pass. However, the reward-guided fine-tuning method of one-step generative models remains largely unexplored. To address this, we consider one-step generators from an optimal transport view, investigating Wasserstein Gradient Flow (WGF) for modeling smooth and controlled distributional evolution in probability space. We then propose a novel reward-guided fine-tuning of a one-step generative model via WGF. We derive a practical training method that requires no reward gradients, thereby handling both non-differentiable and differentiable rewards. Moreover, our method provides smooth and stable reward-guided distributional updates while mitigating reward hacking and mode collapse. Experiments on 2D synthetic data, CIFAR-10, and ImageNet 256$\times$256 with diverse rewards, including JPEG (in)compressibility, class probability, Black-and-White and CLIP alignment, show that our method achieves better reward alignment compared to baselines.

Sign language production (SLP) aims to generate continuous signing motion from spoken language, often through gloss-to-pose generation. Prior work mainly follows two paradigms. Generative models synthesize motion from a learned prior or from noise, without reference to an observed signing instance, making rare hand configurations and signer-specific articulation difficult to preserve. Retrieval-based methods reuse real, well-articulated motion segments, but concatenating segments from different signers and co-articulation contexts can introduce rhythm and style inconsistencies across the full sequence, not only at segment boundaries. These limitations suggest a complementary solution: use retrieval to provide realistic articulation, and use learned refinement to impose the global coherence that retrieval alone lacks. We therefore propose retrieve-and-refine, a paradigm that starts from real retrieved motion and refines it into a globally coherent signing sequence rather than generating motion from scratch. Our framework, SignRR, initializes motion from a dictionary of real sign segments and refines the full sequence with a part-aware Residual VQ-VAE, where residual quantization preserves fine hand articulation and temporal length differences are handled in the latent space. Experiments on PHOENIX14T and CSL-Daily show that SignRR achieves state-of-the-art back-translation performance while maintaining competitive pose quality.

Recent video generation models are increasingly framed as world models. Many physical processes can unfold in more than one valid way. Therefore, a world model should reproduce not only a plausible trajectory, but also the distribution of possible behaviors under the same initial observation and action. We call this distribution-level requirement probabilistic alignment. However, existing evaluations largely assess individual-video plausibility and do not test whether repeated generations recover the correct distribution. This raises a central question: how far are current video generators from probabilistically aligned world modeling? To answer it, we formalize probabilistic alignment as a distributional criterion for world models and introduce PAWBench, a benchmark for evaluating video generators as stochastic samplers of world dynamics. We further introduce PAWEval, an outcome-level protocol that converts repeated video rollouts into empirical distributions over possible physical behaviors. Across 50 scenarios and eleven current systems, no model consistently matches the reference probabilities while recovering the range of valid behaviors. Having established this gap, we test whether language prompts, initial noise sampling, or model training can reshape the model's predictive distribution. We believe our work can serve as a foundation for future efforts to move towards probabilistically aligned world modeling.

Masked discrete diffusion models perform strongly on text, code, and biological sequences, but their training objective rewards only naturalness, and retraining the generator for every new reward is expensive. Inference-time steering of a frozen model either guides the sampler by the reward gradient or searches over several trajectories, and recent samplers combine the two. Such combinations are assembled as pipelines that leave three choices at their defaults: a guidance estimate resting on one Gumbel draw per sample, a reward tilting placed without reference to the distribution the combination then targets, and a selection temperature held fixed although the spread of per-step rewards drifts. We identify that distribution and settle the three choices against it. We therefore propose Variance-reduced Guidance and Adaptive Selection (VGAS), a simple yet effective inference-time framework that reduces the variance of the guidance estimate for both reward types, applies the reward tilting in the clean-token logits, where the pretrained schedule is preserved, and sets the selection temperature per step. Across regulatory DNA, protein and small-molecule benchmarks, VGAS attains the best training-free reward and matches or surpasses a reward-fine-tuned generator.

Chinese query correction (CQC) is important for search and query recommendation on content platforms, but supervised methods rely on large annotated correction pairs that are costly to maintain as query vocabularies evolve. Unsupervised correction with language models is attractive, yet in the short-query setting, unconstrained generation often over-corrects ambiguous inputs toward high-frequency phrases, causing intent drift. We propose \textsc{GUIDE}, a generative unsupervised framework for CQC based on a confuse-then-clarify paradigm. \textsc{GUIDE} encodes phonetically or visually confusable characters with shared-IDs and reconstructs the original query with an encoder--decoder architecture, which constrains correction to plausible confusion neighborhoods while learning from unlabeled query streams. A time-decayed, query-frequency-weighted objective further supports adaptation to rapidly changing query vocabularies. Experiments on \textit{QSpell 250K} and a large-scale real-world dataset (\textit{KwaiSearch}) show that \textsc{GUIDE} consistently outperforms strong baselines, while online A/B testing further confirms gains in correction quality and downstream engagement.

Scientific discovery often involves optimising expensive-to-evaluate objectives over vast, structured, and open-ended hypothesis spaces, such as molecules, protein sequences, and computer programs. Generative models such as large language models (LLMs) provide expressive priors over such spaces, but their likelihoods and self-assessments are unreliable proxies for the objectives and calibrated epistemic uncertainty, especially for novel candidates outside the observed data distribution. We introduce the Large Discovery Model (LDM), an empirically grounded recurrent architecture that couples a generative model with a Bayesian non-parametric reward surrogate model. The generative model proposes and refines candidate designs, while the surrogate predicts their performance and quantifies uncertainty, yielding an uncertainty-aware value that guides candidate generation, refinement, and selection. The discovery memory and the surrogate model are continually updated as each new experimental observation arrives. We evaluate LDM on three scenarios spanning different design modalities and objectives, including neural-network training, antibody design, and molecular optimisation. Compared to LLM-only reflection or traditional statistical search across these domains, LDM achieves a $2.4\times$ greater reduction in validation BPB, an $18.2\%$ relative decrease in binding energy, and more than $60\%$ relative gains in molecular multi-objective performance. These results suggests that LDM could serve as a general-purpose discovery engine for effective search over open-ended hypothesis spaces.

Latent video generation relies on autoencoders to define a compact space in which generative models operate. Although video autoencoder architectures have evolved substantially, their latent spaces are still optimized primarily for pixel-level reconstruction and provide limited high-level semantic organization. A reconstruction-optimal latent space, however, need not be well suited to generative modeling. We propose V-RAE, a video representation autoencoder that builds compact generative latents on top of frozen vision foundation model representations. A lightweight temporal pooling module removes temporal redundancy while preserving semantic structure, and a video decoder reconstructs continuous motion from the compressed features. We evaluate V-RAE with four representative frozen encoders on video reconstruction, semantic probing, and class-conditional generation. V-RAE achieves 2.13 rFVD on K600, outperforming all evaluated large-scale pretrained video VAEs. Its latents retain substantially more semantic information than conventional video tokenizer latents. Under matched generation settings, our best variant achieves gFVD scores of 117.86 and 19.16 on UCF101 and K600, respectively, while converging up to 6x faster}. We further show that reconstruction quality alone is insufficient to characterize generative utility and introduce tFVD, a temporal-coherence diagnostic that correlates more reliably with downstream generation quality. Beyond video generation, V-RAE also improves future video prediction on Cityscapes over the Wan 2.2 VAE latent space under matched prediction settings. Taken together, the experiments show that frozen semantic representations can support video reconstruction, generation, and predictive modeling. The project page: https://v-rae.github.io/.

Clinical intelligence requires estimating a patient's underlying condition from incomplete observations rather than learning isolated mappings from scans to answers. Volumetric medical images provide dense observations of anatomy, attenuation, and lesions, whereas clinical language provides sparse but complementary semantic observations. We formulate CT-centered intelligence as inference over a shared latent patient state, under which readout, reconstruction, and simulation all become state-dependent prediction problems. To operationalize this view, we introduce HounsBench, a computed tomography (CT) centric patient-state benchmark that unifies these three task families with patient-disjoint splits and per-family metrics, and HounsWorld, a 3B multimodal world model that treats volumetric scans and language as observations of the shared state through Joint Understanding-Generation Learning. A shared transformer forms an implicit patient-state estimate and supports three outputs: query-conditioned answers that read out the state, reports and captions that reconstruct it in language, and condition-specific CT volumes for low-dose denoising, virtual contrast enhancement, and anatomy-constrained text-and-mask-to-volume generation. Zero-initialized CT adapters preserve pretrained multimodal mappings, while condition-explicit Hounsfield-unit window sampling exposes clinically meaningful density observations. HounsWorld shows strong performance across all three task families while consistently improving CT understanding through clinically structured completion. Our project is available at https://github.com/byhwhite/HounsWorld.git

Probabilistic Circuits (PCs) are generative models that support exact inference and, unlike deep neural networks, admit an exact and tractable measure of loss-surface curvature: the trace of the Hessian of the log-likelihood. Recent work regularizes this trace globally to bias learning toward flatter, better generalizing optima. We show that treating sharpness as a global regularizer can be misspecified for PCs, whose curvature is inherently compositional. We prove that each sum node's contribution to the Hessian trace factorizes exactly into its circuit flow, which measures how heavily the node is used, and a local sharpness term determined by its output distribution. This decomposition provides insights into why global sharpness regularization is depth biased and can lead to underfitting. Building on it, we introduce an adaptive sharpness aware regularizer that penalizes nodes based on intrinsic local curvature and preserves closed form EM updates. We also show that empirically, this targeted regularization recovers the generalization that global regularization sacrifices while retaining the robustness and benefits of sharpness aware learning.

This article presents with DYSANOS the first generative market model for smooth SANOS option surfaces for all strikes and expiries which are free of static arbitrage. Our model is designed to generate entire paths of daily spot and option prices for years in the future. We present a robust and useful if somewhat simplistic baseline hidden state generative model in the form of an AR(1) model. We discuss model setup, data pipeline, and training and investigate numerical resence of dynamic arbitrage. We illustrate model performance on Option Metrics' IvyDB S&P Index data from 2020 to~2025 and compare it to a pure implied-vol PCA model.

High-fidelity image generation faces a trade-off between speed and quality. Diffusion models produce strong visuals but require costly iterative sampling. Existing efficient methods mainly distill pretrained models into few-step samplers, a challenging process that depends heavily on teacher-model quality. In this paper, we introduce XYZFlow, a framework that rethinks efficient generation through multidimensional scaling of flow matching. Unlike single-step mappings, XYZFlow enhances expressivity by making probability paths more identifiable and learnable through structured multidimensional conditioning. We view autoregressive modeling as implicit flow straightening, where richer context reduces trajectory ambiguity. XYZFlow realizes this idea through two orthogonal dimensions: temporal scaling, which uses non-Markovian conditioning on the full denoising history; and spatial scaling, enabled by Next Shortcut Prediction, which sequentially generates patches using preceding patches' denoising trajectories as priors. Experiments show that XYZFlow achieves state-of-the-art performance, with 7.2-8.5X teacher speedups and competitive FID, while Next Shortcut Prediction delivers superior quality-latency trade-offs over model scaling or step reduction.

Generative models like Diffusion Models and Flow Matching have demonstrated remarkable capabilities in synthesizing high-fidelity driving videos, but are severely constrained by high inference latency due to the requirement of extensive sampling steps. We argue that this inefficiency stems from the prevailing reliance on a standard Gaussian source distribution, where consecutive frames are initialized as independent Gaussian noise. This paradigm disregards the rich spatiotemporal correlations inherent in driving videos, compelling the model to regenerate deterministic scene structures existing in previous frames from noise, which is both computationally redundant and prone to geometric inconsistency. To address this problem, we propose GeoFlow, a novel framework designed to achieve efficient driving video generation by harnessing explicit geometric priors. Instead of sampling from standard Gaussian noise, we leverage multi-view geometry and spatially-adaptive noise injection to construct a Geometry-Aligned Prior (GAP) distribution as starting point. This initialization bridges the gap between source distribution and data distribution, yielding a significantly straighter and shorter sampling trajectory. Extensive experiments demonstrate that GeoFlow can achieve remarkable efficiency of both training and inference: merely several hours of fine-tuning on baseline models can significantly boost few-step generation quality, while fully converged training drastically reduces number of inference steps required for state-of-the-art video generation.

We formulate generative modeling as a path integral in which flow-based, diffusion-based, variational, and adversarial models arise as different evaluation principles for a single master action. Its Martin-Siggia-Rose-Janssen-de~Dominicis (MSRJD) form separates free from interacting probability flows and opens them to diagrammatic perturbation theory. The expansion yields a one-loop correction to deterministic samplers at no stochastic-sampling cost, which we validate on solvable and nonlinear drifts, where it reduces a 53 % tree-level error to 1.6 %. Imperfect learned scores enter as insertions and yield a response-weighted score-matching objective, and symmetry-equivariant drift design becomes an operator expansion with EFT power counting.

Generative models can produce images nearly indistinguishable from real data, yet rigorous and interpretable evaluation remains challenging. Conventional metrics such as FID provide only scalar scores with limited diagnostic insight. Widely adopted CLIP-based metrics enable semantic evaluation beyond simple training class labels, but inherit limitations from CLIP's training paradigm that restrict attribute-wise analysis. We propose RA-CLIPScore, a novel metric that mitigates these issues and extends CLIP-based evaluation to spatial distribution alignment, measuring whether generated objects adhere to the positional priors found in the training data. RA-CLIPScore introduces dual prompts to decouple competing attributes and leverages local patch tokens to capture fine-grained regional semantics. We evaluate image generative models on their ability to match both attribute and spatial distributions of the training data. Extensive experiments show that RA-CLIPScore provides more robust and interpretable evaluations than prior methods, particularly under distribution misalignment or partially irrelevant textual attributes. We further demonstrate how it reveals spatial biases in generative models. User evaluations confirm that Regional Single Attribute Divergence based on our RA-CLIPScore aligns more closely with human perception of visual diversity than existing semantic metrics.

We propose CVaR-penalized Generative Particle Algorithm (CVaR-GPA), a robust, tail-agnostic algorithm for fine-tuning generative models to learn heavy-tailed distributions and capture extreme events, requiring no prior knowledge or estimation of the target's tail characteristics. The method is the Wasserstein gradient flow of the Lipschitz-regularized Kullback-Leibler (KL) divergence penalized by a Conditional Value-at-Risk (CVaR) discrepancy term: the Lipschitz-regularized KL divergence enables robust learning under minimal assumptions on the target distribution, while the CVaR penalty restores the velocity that otherwise vanishes prematurely in the under-sampled tails. The penalized flow admits a bounded but non-Lipschitz velocity field. This departs from the Lipschitz transport maps of standard generators, which preserve the tail behavior of a light-tailed source, and enables transport toward heavier-tailed targets. To define this flow on empirical measures, we derive the first-variation subgradients of CVaR from its Rockafellar-Uryasev representation, valid precisely where the classical density-based formula fails. The particle algorithm CVaR-GPA fine-tunes the output samples of any pre-trained model, without access to its architecture, and runs on an adaptive time horizon set by a kinetic-energy stopping criterion rather than a preset depth. On synthetic isotropic and anisotropic Student-$t$ target distributions, Neal's funnel distribution, and the real-world high-dimensional Fama-French 25 portfolio dataset, CVaR-GPA dramatically improves global and tail accuracy on heavy-tailed targets over the pre-trained baseline.

Extracting quantum information from a quantum state is a fundamental task of quantum computation, often requiring the estimation of many non-commuting observables under a finite measurement budget. For both near-term and early fault-tolerant settings, the measurement protocol must balance statistical efficiency against implementation resources such as circuit depth, connectivity, and entangling-gate count. Many existing strategies focus on two extremes: hardware-friendly product measurements with high sampling cost, and fully commuting measurements with deep circuits. Here we recast resource-constrained measurement design as a generative learning problem. We introduce FlowMeas, which uses a generative flow network to directly sample finite ensembles of shallow Clifford measurement circuits subject to a prescribed shot budget and hardware constraints. At zero entangling depth, FlowMeas learns qubit-wise commuting measurement schedules and already matches or improves leading product-measurement methods on nearly all molecular benchmarks. Allowing one or two entangling gate layers yields further reductions in energy estimation error of up to $27\%$ relative to the strongest state-independent product-measurement baseline. The learned policy can also be reused across related Hamiltonians, substantially accelerating retraining along a molecular potential-energy surface. We further obtain results for molecular Hamiltonians with up to 20 qubits and apply the framework to a compactly encoded 54-qubit interacting fermionic model, extending the demonstrated scale beyond prior molecular benchmarks. These results establish generative learning as a flexible and unified framework for quantum measurement design under practical resource constraints.

Industrial time-series signals, such as turbine temperature and rotational speed in aero-engines, are essential for monitoring the health and operational status of complex dynamical systems. However, collecting such data is often limited by harsh environments (e.g., high temperature and high pressure) and the high cost of experimental testing. To address this challenge, we introduce PhysDGM, a stepwise physics-embedded diffusion generative model for synthesizing time-series data that are consistent with the underlying physical laws of dynamical systems. PhysDGM embeds physical laws directly into each reverse diffusion step of the generative process, ensuring trajectory-level physical consistency, rather than enforcing constraints only at the final output. A large-scale AI-synthetic dataset (4.4 million samples, 20x scale-up) constructed by PhysDGM demonstrates strong fidelity across 34 datasets spanning turbofan engines, aero-engines, batteries, and chemical processes. After incorporating the synthetic data, the downstream task performance substantially surpassed that using real data alone by 48% for remaining useful life prediction, 15% for health indicator estimation, 22% for state-of-health assessment, and 20% for fault diagnosis. Moreover, it requires 10-20x less training data than existing approaches, substantially reducing the high cost of data collection in dynamical systems. We further demonstrate PhysDGM's potential in identifying early-stage faults in aero-engines by incorporating AI-synthesized data. In summary, PhysDGM provides a solid foundation for generating physically consistent industrial time-series, paving the way for expanding physics-guided AI into diverse data-scarce environments, including both industrial machinery and complex chemical reaction dynamics.

This paper studies inverse sampling for Lévy-driven generative models from the perspective of Markov generators. Unlike conventional diffusion models, Lévy-driven dynamics involve infinite jump activities, which makes their reverse process nonlocal and difficult to characterize using score information alone. We address this challenge by analyzing the forward and reversed generators. It is derived that the reversed jump component generally becomes a state-dependent Markov jump process governed by a nonlocal density ratio. This observation motivates a structured reverse sampler that decomposes the dynamics into diffusion, small jump, and large jump components. Based on this characterization, we develop a computationally tractable sampler for a class of isotropic linear Lévy SDEs with symmetric $α$-stable jump components. For the jump component, the neural network is used only to amortize the rate of large jump activities, while jump amplitudes are generated from analytically derived conditional distributions, which improves interpretability and controllability. Efficient implementation techniques are further introduced under this setting to avoid expensive high-dimensional integration and sampling. The sampler is further adapted to approximate observation-guided sampling and applied to OFDM-SISO channel estimation under mixed Gaussian and impulsive noise. Simulations show robust estimation performance with a favorable tradeoff between complexity and performance.