Humanoid Robotics

Assembly, wear, and component replacement perturb the sensor extrinsics and joint zeros encoded by a humanoid CAD model. Existing procedures calibrate one sensor pair or require external fiducials. Using only robot-native motion and onboard sensing, we present OmniCalib, a target-free workflow that calibrates the full upper limbs---all 14 arm joint zeros and the extrinsics of both wrist and chest cameras---as well as lower limbs and the multi-camera head rig. Each module matches a robot-native task to a parameter block, checks observability, and writes only supported corrections to the CAD model. Our depth ICP method recovers all 14 arm joint zeros and calibrates all RGB-D camera extrinsics without any calibration target. Relative to CAD, the estimated extrinsic corrections are 10.56 mm and 1.74 degrees for the left wrist, 6.33 mm and 1.25 degrees for the right wrist, and 9.81 mm and 0.929 degrees for the chest RGB-D camera. ICP point-to-plane residual is 2.09 mm. On the same injected offsets, ICP and ArUco recover all 14 joint zeros below the 0.1-degree encoder-resolution reference. On an AGIBOT A3 Ultra humanoid, four static double-support stances recover all 12 lower-limb joint-zero offsets injected with an RMS error of 0.063 degrees. The head module combines multi-camera visual odometry with legged odometry and dynamic compensation through the live ROS transform tree. Using only planar walking, it attains a mean SO(3) error of 1.061 degrees across three sequences. The best sequence reaches 0.775 degrees, competitive with iKalibr at 0.902 degrees from rich 6-DOF excitation. Rig-relative angles repeat within 0.140 degrees. Injection recovery and held-out tests validate each observable block.

There is tremendous value in humanoid robots taking on physically demanding, hazardous, and repetitive work in spaces built for humans. However, a useful robot for these spaces must coordinate locomotion, whole-body motion, perception, contact, and operator supervision. We present a robot-local, runtime-editable behavior authoring and runtime system that addresses these challenges. We argue that behavior architecture can be a primary enabler of capability, speed, and reliability, and that runtime editability enables fast behavior creation, adaptation, extension, and combination. Our behavior architecture combines object-centric Affordance Templates, a tree structure that provides organization and logic, and runtime-editable perception through a behavior scene and primitive scene actions. Our operator interface remains continuously synchronized to the robot for runtime authoring, monitoring, and repair. Action primitives execute through a whole-body controller that supports concurrent body motions and walking. Demonstrations of our system cover six task variants on Unitree H1-2 and Alex. We execute a push door traversal in 34 seconds and sort six balls by color in 45 seconds under human disturbance. Timed authoring sessions show scratch creation of new loco-manipulation behaviors and adaptation of existing ones in hours. Comparison against the literature finds our approach to be competitive with recent learned systems.

People read a humanoid robot's motion in social settings not only for the action performed but for the affect conveyed. Motion carrying that affect has so far been generated for human avatars, where style is taken from a reference clip or an emotion word, neither of which can be quantitatively parameterized. We present PAMoR, which turns affect into a measured control parameter: a valence-arousal (V-A) coordinate computed natively on robot kinematics. It is obtained in closed form from postural expansion and movement energy, and these measurements serve directly as generation conditions, with no human annotation. An action prior and two affect priors, trained in a shared latent space, are composed at each denoising step: the action prior fixes what is performed, the affect priors modulate how. Whole-body motion rolls out autoregressively on a 29-DoF Unitree G1 in real time, with action and affect both editable. Generated motion tracks the commanded V-A over its full range while text-to-motion fidelity still matches text-only baselines. In a perceptual study, raters identify the commanded emotion on 0.38 of trials, above both baselines and approaching the 0.44 reported for acted human bodies.

Real-world online reinforcement learning (RL) provides a promising approach for training robotic manipulation policies directly in the physical world, avoiding the sim-to-real gap and enabling continuous policy refinement through human-in-the-loop interaction. Recent methods have demonstrated sample-efficient learning through human intervention but remain limited to small randomization ranges and encounter challenges with the non-stationarity induced by concurrently training multiple agents. To address these limitations, we introduce a unified framework that combines centralized training with decentralized execution (CTDE) and a Hybrid Reward Architecture (HRA). This enables multiple actors to share a centralized multi-head critic. The critic is decomposed into task and grasp heads, corresponding to the sparse task reward and a potential-based grasping reward, respectively. We accordingly reformulate the critic and actor objectives to exploit the decomposed Q-values while explicitly accounting for the categorical action distribution of the discrete gripper policy. Experimental results demonstrate that the proposed framework substantially improves both sample efficiency and policy performance. We validate our approach on two robotic arms and a simulated humanoid robot across tennis ball and banana pick-and-place, pot reset, and simulated block relocation tasks under dimension-wise domain randomization, approximately 5-25x larger than those considered in prior work. Compared with a state-of-the-art baseline, our method improves the success rate from 60% to 80% on tennis ball pick-and-place, from 60% to 90% on banana pick-and-place, and from 25% to 95% on simulated block relocation, while also successfully accomplishing a task where the baseline consistently fails. Videos and more details are available at our project website: https://hil-harc.github.io/.

Industrial humanoid robots are constrained less by locomotion or manipulation capability than by the immaturity of functional safety certification for legged platforms. The root difficulty is that the safe state of a legged robot is an actively-controlled state, which violates the fail-passive assumption underlying ISO13849-1 / EN60204-1: removing power from a walking biped causes an uncontrolled fall, so classical de-energization is itself a hazard. We term this the fail-passive gap and use a certified external safety chain (light curtain, emergency stop, fail-safe input, fail-safe PLC, and wireless PROFIsafe) as an instrument to locate it precisely: because the external chain is closed and quantifiable with established methods (PFHD, DC, CCF, PL/SILCL), the residual uncertifiable element is pinpointed to the robot-side reaction chain. Using a Siemens fail-safe S7-1500 emergency-stop reference, we show its certifiable Reaction subsystem is contactor-based power removal (Stop Category0)---exactly the element a balancing humanoid cannot have. We deliberately do not claim end-to-end certified PLe / SIL3. We validate the approach on a Unitree G1 EDU pick-and-place cell in a 3m x 1.5m semi-enclosed workspace, and contribute a humanoid-specific analysis of the active safe state (fall-as-hazard, single-support stop bounds, balancing-policy residual risk, ISO13855 separation) and a provenance-labeled timing budget. Hosting an industrial software-defined automation (SDA) controller on the robot, co-located with the balancing policy, moves robot-side PROFINET/PROFIsafe reception onto a standardized IEC~61131-3 interface; because the G1's onboard compute is not safety-rated hardware, this endpoint is not a certified safety runtime, which reinforces rather than resolves the fail-passive gap and localizes it to the SDA-to-balancing-policy interface.

Previous research has shown that a human-like robot's acceptance heavily depends on the setting in which it operates and its ability to perform relevant tasks. This paper, first, reports on how our robot processes natural language to generate a multimodal, verbal response integrating emotional expressions based on an emotion simulation backend. Then, it describes how visitors were invited to speak with our robot in their own language at three different, public locations, where the robot was running continuously for several days. The TAM2 questionnaire results reveal that on average users were motivated to use the robot and found it rather useful and easy to use regardless of the specific location. However, public spaces like the tourist information and the city library seem to be a better fit for our interactive, robotic head than an office environment such as the building authority, where the willingness to interact was lower. Overall, the robot's multi-lingual responses were very much appreciated, but every fifth user found the response time too slow impeding the dialog flow, which remains to be improved in future work.

Full-sized humanoid robot capabilities have grown exponentially in recent years, aiming towards general-purpose deployment in human environments. A popular control method used by manufacturers utilizes Virtual Reality for upper-body teleoperation and Reinforcement Learning for lower-body balance and locomotion control. As a result, a single remote operator can see, manipulate, and navigate about a real, distant physical environment. This powerful control stack is often relegated to expensive full-sized robots, many of which are inaccessible to the research community. Miniature humanoids are more prevalent, but employ less biomimicry in their design (e.g. fewer sensors, Degrees of Freedom, etc) and lack similar developments. This paper describes a compliant full-body telepresence control stack developed from the ground up for miniature humanoids. Framework experimentation on ROBOTIS OP3 hardware showcases walking at speeds up to 0.45 m/s independent of arm motions. Tele-loco-manipulation is demonstrated via a cube relocation experiment with an expert human operator. On average, the teleoperated system moved 2 different 40 g cubes within 10 mins, walking a total distance of 5 m. Overall, the developed system shows potential for miniature humanoid tele-loco-manipulation.

Understanding the computational basis of action recognition is a central challenge in social cognition as well as in human-robot interaction. Inspired by the Mirror Neuron System (MNS), we propose a two-level architecture for motor primitive discovery and online phase recognition applied to the NICO humanoid robot. At the first level, two Self-Organising Maps (SOMs) learn topographic representations of arm kinematics (A-SOM) and hand kinematics (H-SOM) from simulated trials covering seven motor actions. The maps are trained on non-redundant features identified through hierarchical correlation analysis of motion trajectories. The results show that the two SOMs encode complementary aspects of motor behaviour. At the second level, an Echo State Network (ESN) evaluates whether temporal trajectories of SOM activations, represented by consecutive best-matching units, are sufficient for online recognition of the currently executed movement phase. The results show that SOM-based trajectories preserve the dominant phase-discriminative structure of the movement, while contextual information provides only a secondary refinement. Our contribution is the integration of established SOM and ESN methods within an MNS-inspired architecture for motor primitive representation and online phase recognition. The results are compatible with the computational hypothesis that self-organised motor representations, when temporally integrated, can support accurate online recognition of ongoing movement phases.

Robotic grasping requires accurate coordination between visual perception, object localization, inverse kinematics, and hand control. However, when movements planned in simulation are executed on a physical robot, the sim-to-real gap can cause small positioning errors that prevent successful grasping. In our previous work, we introduced a low-cost haptic calibration method that improved 2D reaching accuracy of the humanoid robot NICO. In this paper, we extend this approach from reaching to tabletop object grasping by adding YOLO-based object and hand detection, stereo vision-based localization using the robot's built-in low-resolution fisheye cameras, and task-specific corrections for grasp execution. Together, these components form a novel calibration-based grasping pipeline that does not require RGB-D cameras, motion capture, or external tracking systems. We also implemented a visual feedback model that aligns the robot hand with the detected object before grasping. Our results show that the fully nonlinear calibration model achieved the best performance inside the calibrated area, while the visual feedback model achieved the highest overall grasping success across the full tabletop workspace.

Seamless human-robot interaction (HRI) requires a number of perceptual and motor abilities from the robot, one of them being the imitation of human gestures. Humanoid robots have an advantage in HRI thanks to their anthropomorphic features. In this work, we develop a system for imitation of human arm gestures by the semi-humanoid robot NICO based on analytical geometry and a pretrained MediaPipe pose-estimation model. For each input RGB frame, 3D coordinates of relevant human body landmarks, including arm joints and hand keypoints, are obtained using the MediaPipe framework. Joint angles are then computed from these coordinates using derived geometric relations. Finally, the computed angles are properly mapped to NICO's motor configuration and executed in a predefined motion sequence. Preliminary experiments on several representative arm gestures with six participants of different height indicate that the proposed method can produce meaningful imitative motions from monocular RGB input only, while also highlighting limitations in more complex poses and wrist-related movements.

Recent advances in humanoid robotics have highlighted the importance of deployable loco-manipulation skills. Dribbling a soccer ball while evading active opponents requires simultaneous balance, precise ball control, and awareness of a dynamic adversary under onboard sensing and real-time constraints. Existing approaches typically separate perception and motion, which can be effective in controlled settings but may fail under occlusions, fast ball movements, and complex opponent interactions, since perception is not directly optimized for control. We propose an integrated approach in which a temporal depth encoder is embedded into a reinforcement learning policy through a task-specific projection layer. We apply this framework to a simulated Booster T1 humanoid robot and show that it is possible to learn vision-based, opponent-aware dribbling directly from depth observations, without explicit state estimation or privileged scene information. The learned policy achieves 100% success in nominal target-driven dribbling and 96% success with a single static obstacle, while reaching 46% success against an actively moving ball-attacker opponent. These results demonstrate that the proposed framework supports robust vision-based dribbling in nominal and moderately dynamic settings, and provides a strong foundation for handling more challenging moving-adversary scenarios.

Animatronic faces are a central component of socially interactive robots, enabling rich nonverbal communication through facial articulation. However, state-of-the-art animatronic faces are typically tailored systems: each new facial geometry requires extensive manual mechanical redesign, making large-scale personalization prohibitively slow and costly. In this work, we pursue automated and scalable mechanical face synthesis, aiming to rapidly generate a physically realizable facial mechanism for a wide range of facial geometries. We introduce a parametric, linkage-driven mechanical face template whose topology and actuator layout are explicitly parameterized to support systematic scaling and retargeting across diverse facial morphologies. Building on this template, we propose a hierarchical automatic design algorithm that takes a single 2D portrait as input, reconstructs a target 3D face, and synthesizes a collision-free, manufacturable internal mechanism. The algorithm combines anatomy-guided feasible motion volumes, Action Unit (AU)-derived trajectory-based expressiveness objectives, and a collision-driven outer-loop refinement strategy. Beyond hardware synthesis, we argue that future mechanical faces deployed at scale must engage in bidirectional, multi-turn conversation rather than functioning solely as speaking or listening heads. To this end, we develop a dual-identity conversational facial motion synthesis framework that jointly models speaking and listening behaviors from audio, producing temporally coherent 3D facial motion suitable for physical execution. We validate our system through extensive experiments, including (i) quantitative evaluation of automatic mechanism synthesis across diverse facial geometries, (ii) comparisons against manual mechanical design, (iii) benchmarks on conversational facial motion synthesis and real-time deployment, and (iv) perceptual user studies.

Recent advances in actuation, control and learning have rapidly pushed humanoid robots from a distant vision towards near-term real-world deployment. Healthcare is a particularly pressing domain, in which staffing shortages and increasing care demand are widening the gap between clinical workload and available skilled labour. Although current automation has largely focused on digital and logistical tasks, much hospital work remains embodied, requiring mobility, manipulation and safe interaction in human-designed environments. Humanoid form factors offer unique potential, particularly for assisting with surgical tasks. Traditionally, robotic systems for surgery are purpose-built platforms such as Intuitive Surgical's da Vinci Surgical System, and it remains unclear how close current humanoid systems are to meeting the precision, control and safety requirements of minimally invasive surgery. Here we present a systematic evaluation of contemporary humanoid technology for laparoscopic surgical tasks. We develop a humanoid-based laparoscopic teleoperation framework using general-purpose instruments and assess its abilities through benchtop characterization, dry-laboratory user studies spanning diverse surgical experience levels and in vivo porcine studies. Across these evaluations, we quantify technical feasibility, task performance and clinical readiness relative to established surgical platforms. Together, our study provides an evidence-based assessment of current humanoid abilities and limitations for surgical applications, highlighting both their promise and key technical challenges that must be addressed before clinical deployment.

The uncanny valley is a long-standing empirical rule in humanoid robot design: making robots more human-like can reduce, rather than increase, affinity. Yet existing guidelines, such as adopting robot-like appearances, avoiding excessive realism, and reducing cross-modal mismatches, remain difficult to use for algorithmic design because they are not expressed as manipulable variables. Here, we propose a hierarchical Bayesian generative model that operationalizes these guidelines as mathematical design variables. The model represents affinity toward humanoid robots as posterior-weighted negative category-conditional surprise and explains category ambiguity and perceptual mismatch as increases in surprise. It maps uncanny-valley mechanisms onto four variables: deviation from the predicted robot-category mean, inconsistency in human likeness across modalities, prediction uncertainty, and observational uncertainty. Simulations showed that category ambiguity and appearance--motion mismatch can produce affinity reductions, and that uncertainty reshapes the valley. In a human-subject experiment with robot--human morphing images, we manipulated prediction uncertainty using blurred prior robot stimuli and observational uncertainty using blurred evaluation stimuli. Increased observational uncertainty attenuated the decrease in familiarity ratings at intermediate human likeness, whereas low prediction uncertainty increased ratings for robot-like appearances. This framework turns empirical uncanny-valley heuristics into a computational basis for algorithmically evaluating and optimizing humanoid robot appearance and behavior.

As humanoid robots become increasingly dynamic, coupling them with reinforcement learning offers a promising approach to solving the complex, underactuated mechanics of passive inline skating. Equipping a humanoid robot with passive inline skating wheels presents an opportunity to combine the versatile agility of humanoids with the high-speed, energy-efficient locomotion strategies utilized by human skaters. In this paper, we train and deploy a reinforcement learning control policy that enables novel locomotion strategies for a humanoid robot modified to equip consumer inline skates instead of conventional feet. Unlike previous work limited to quadrupedal robots or actively driven wheels, our system allows for precise 6-DoF control of the skates to execute dynamic, edge-driven propulsion strategies. Our skating strategies emerge entirely from our reward structure, without reliance on human motion data, imitation learning, or kinematic priors. We overcome the inherent instability of passive wheels and simulation contact artifacts by utilizing different geometric wheel models (spherical and ellipsoidal) during training and validation, along with a custom success-based command curriculum and a specialized rolling reward. Consequently, our policy demonstrates up to a 50% reduction in Cost of Transport (CoT) compared to standard walking gaits. The resulting policy successfully transfers zero-shot to the physical Booster T1 hardware. Real-world deployments demonstrate dynamic balance, the ability to reject active physical perturbations, and agile locomotion strategies capable of turning at speed. A video of our results can be found at https://www.youtube.com/watch?v=-_APcOS7uFo.

Robots operating in real-world environments must in general be able to recognize previously unseen objects. As robotic systems move toward open-world autonomy, there is a growing, yet largely unmet, need for open vocabulary object detectors that are prompt-free and efficient enough for continuous deployment. We present AnomNOVIC, a two-stage known-workspace framework that combines a masked autoencoder (MAE) trained for anomaly detection, with NOVIC, a powerful real-time prompt-free open vocabulary image classifier. The MAE produces generic object-agnostic bounding boxes, allowing NOVIC to classify salient image regions without requiring a predefined candidate class list. We evaluate AnomNOVIC against strong open vocabulary baselines in a tabletop robot-object environment featuring the NICOL humanoid robot, reaching 47.1% AP / 57.5% AP50 for prompt-free recognition, and 59.0% AP / 72.5% AP50 if class candidates are provided. Across additional datasets, including an in-the-wild test set with 48 unique objects, AnomNOVIC reaches up to 82.6% prompt-free detection and classification accuracy. These results significantly surpass all tested open vocabulary baselines, including YOLO-World-v2, OWLv2, and YOLOE.

Humanoid robots could take on physically demanding, hazardous, and repetitive work in spaces built for humans. However, a useful robot for these spaces must coordinate locomotion, whole body motion, perception, contact, and operator supervision. This thesis presents a robot-local, runtime-editable behavior authoring and runtime system. Our system strives to be maximally observable, predictable, and directable following Coactive Design principles developed during the DARPA Robotics Challenge. Our operator interface remains continuously synchronized to the robot for runtime authoring, monitoring, and repair. Our behavior architecture uniquely combines object-centric Affordance Templates, organization and logic inspired by Behavior Trees, and runtime-editable perception through a behavior scene and primitive scene actions. Action primitives build on a whole-body controller that supports moving the arms while walking, and use a concurrent action layering algorithm for speed. The behavior library developed during this work covers more than twenty real-robot task variants, including push and pull doors with knob, push-bar, and lever-handle mechanisms, multi-step exploration sequences, obstacle clearing, and reactive table-to-table manipulation tasks. This behavior system has been deployed on many humanoid robots, such as Boston Dynamics' DRC Atlas, NASA's Valkyrie, IHMC and Boardwalk Robotics' Nadia, Unitree's H1-2, and IHMC's Alex. We evaluate our system across capability, speed, reliability, and speed of behavior creation, adaptation, extension, and combination. Our experiments demonstrate that we can adapt, extend, and combine existing behaviors to create novel loco-manipulation behaviors in minutes or hours. Videos: https://www.youtube.com/playlist?list=PLJK5CTyotYqsfgfnXb-09YNFeBose6uEY.

Tactile sensing is essential for humanoid robots to achieve safe physical interaction, dexterous manipulation, and truly human-like responsiveness. However, the design of such systems remains challenging. Conventional approaches often suffer from complex multilayer structures, intricate wiring, high cost, and poor scalability, making it difficult to realize full-body tactile sensing with real-time, low-latency detection while maintaining minimal computational load on the robot's main processor. In this work, we present a simple, scalable and hardware friendly tactile sensing system for a companion humanoid robot based on the self-capacitance principle. The proposed sensor system employs a single conductive fabric layer with a conductive fabric wire architecture and does not require intricate electrode patterning. Scalability was demonstrated by fabricating a 100-point sensor array on a flexible printed circuit (FPC). Evaluation across sampling frequencies showed that 10 Hz is insufficient and misses transient events, whereas 100 Hz and 1000 Hz reliably capture and clearly distinguish all interaction types: gentle touch, slow tapping, fast tapping, and hitting. A decision-tree classifier was implemented directly on the FPGA, offloading real-time inference from the Raspberry Pi 4 with minimal latency and negligible power overhead. This design fully meets the tactile sensing requirements of the HIRO-chan robot and is well-suited for full-body tactile sensing in HIRO-chan and other companion robots.

The scalability of humanoid robots will depend not only on models and hardware, but also on whether physical experience can accumulate across robots, tasks, organizations, and time. Drawing on the authors' work in developing ISO/WD 26264-1, Humanoid robot datasets -- Part 1: General requirements, within ISO/TC 299/WG 16, this article argues that data standards are becoming foundational infrastructure for Physical AI. We develop three insights. First, humanoid robot data is embodied interaction data, not a collection of isolated digital samples; a useful dataset must preserve the relationship among robot body, action, task, scene, execution trace, and outcome. Second, its value depends on physical coherence: multimodal streams are reusable only when timing, coordinate frames, calibration, kinematics, units, and synchronization assumptions remain inspectable. Third, the main bottleneck is not only data scarcity, but non-cumulative data caused by high collection costs, data silos, and inconsistent evaluation. We argue that humanoid robot data standards address these bottlenecks by making embodied experience interpretable, shareable, traceable, and reusable. A general standard should provide horizontal infrastructure for lifecycle management, metadata, provenance, quality, versioning, and traceability, while capability-specific parts should define domain grammar for manipulation, locomotion, human-robot interaction, cognition, and future humanoid capabilities. As AI moves from screens into bodies, data standards must evolve from organizing digital information to structuring physical interaction.

This paper presents an invariant extended Kalman filtering (InEKF) approach for real-time state estimation of humanoid robots operating on non-inertial ground using only onboard proprioceptive sensing. The proposed approach estimates the robot's base position and velocity relative to the moving ground frame without requiring direct measurements of ground motion or externally mounted sensors. By exploiting kinematic constraints at the stance foot through foot-mounted IMUs, the filter accounts for ground-induced nonlinearities in the process and measurement models while remaining fully proprioceptive. The estimator is formulated to admit a right-invariant measurement model, enabling favorable error dynamics under large initial uncertainties. Observability analysis establishes conditions under which the robot's relative base position and velocity are observable with respect to the non-inertial ground frame. Experiments with the Digit humanoid robot standing and squatting atop a swaying and pitching ground showcase a 96% speedup in convergence rate and an 80% reduction in position estimate errors over existing InEKFs. Walking experiments on a uni-axially rotating ground achieve an average estimation error of less than 9 cm for an initial error of up to 1 m.

Expressive gestures are essential for natural and effective communication, complementing speech when verbal cues alone are insufficient (e.g., pointing). For social robots such as the humanoid Pepper, producing natural and expressive movements is critical for improving human-robot interaction (HRI) and long-term acceptance. However, generating gestures remains challenging due to reliance on expert-authored animations, resulting in rigid behaviors that are impractical for dynamic and diverse environments. Alternatively, machine learning approaches often struggle to capture perceived naturalness, becoming increasingly challenging with more degrees of freedom. Consequently, producing expressive robot gestures requires a system that can adapt to the environment while adhering to social norms and physical constraints. Recent advances in large language models (LLMs) enable dynamic code generation, offering new opportunities for runtime gesture synthesis from natural language. In this paper, we integrate ChatGPT into the humanoid robot Pepper to generate co-speech gestures aligned with conversational output. While this baseline enables flexible gesture generation, the resulting motions are often perceived as stiff and unnatural. To address this limitation, we introduce an iterative reinforcement learning with human feedback (RLHF) system that finetunes gesture generation based on user evaluations, leveraging an iterative user study to compare Pepper's generated gestures. Our results show that RLHF improved the LLM's co-speech generative capabilities, producing more expressive, relevant and fluid movements.

Expressive co-speech gestures are crucial for natural human--robot interaction, yet generating them on physical humanoid robots remains challenging because, unlike virtual avatars, robots must synchronize gestures with speech under strict kinematic and actuator constraints. We present \textbf{WaveSync}, a hybrid framework in which a Large Language Model decomposes dialogue responses into structured semantic schemas and assigns per-word importance weights, forming a continuous Semantic Importance Wave. Gesture trajectories are shaped through Dynamic Movement Primitives to ensure kinematic feasibility while enhancing expressiveness. A Wavefront Optimization stage aligns gesture stroke peaks with speech emphasis peaks and resolves residual temporal conflicts through gesture-duration compression and forward propagation. Experimental evaluation across five dialogue scenarios demonstrates effective gesture--speech alignment and favorable performance in both objective and subjective evaluations. The results further show that the key components of WaveSync contribute to producing gestures that are expressive, semantically grounded, and kinematically feasible. The code, resources, and videos are available at \href{https://github.com/pairs-lab/WaveSync}{WaveSync}.

Humanoid foundation models are advancing faster than we can evaluate them. While real-world testing is expensive and difficult to reproduce, existing simulation benchmarks focus primarily on table-top or wheeled robots. A scalable and reproducible benchmark for whole-body humanoid loco-manipulation remains an open problem. To this end, we present SIMPLE, a unified simulation testbed for humanoid policy learning and evaluation. SIMPLE couples the accurate contact-rich dynamics of MuJoCo with the photorealistic rendering of IsaacSim. It provides a large-scale environment comprising 60 diverse whole-body tasks, 50 indoor scenes, and over 1,000 object assets. To facilitate scalable data collection, the framework integrates two data generation pipelines: automated trajectory generation via motion planning and a low-latency VR teleoperation interface. We further integrate and benchmark mainstream humanoid policies at scale in SIMPLE, including lightweight imitation networks, large vision-language-action (VLA) models, and recent world action models (WAMs). Our experiments reveal a strong correlation between policy performance in simulation and the real world. Furthermore, we demonstrate that policies trained on data collected in SIMPLE can be transferred zero-shot to physical humanoid robots under similar settings, providing a robust and reproducible foundation for humanoid robotics research.

Learning a good action embedding space is fundamental to scalable robot policy learning, yet existing methods treat action latents as task-specific intermediates rather than first-class representations. The resulting latents are unstructured, embodiment-specific, and weakly tied to motion semantics, limiting interpretability, controllability, and transferability across robots. We position the action embedding space itself as a first-class design target, with downstream policy quality emerging from representation quality. Exploiting motion's intrinsic periodicity, we factorize it into a phase manifold that captures cyclic structure via FFT-parametric coefficients, together with a pose branch that conditions the manifold on non-periodic configuration detail. Combined with motion-semantic distillation, this factorized structure yields a cross-embodiment motion manifold that is interpretable and embodiment-agnostic by design. Anchoring multiple humanoid robots to a shared human-pretrained manifold then produces a unified action embedding space across diverse platforms, achieving strong cross-embodiment retrieval and consistent gains on downstream robot tasks.

Collaboration is central to human behavior, enabling tasks beyond individual capability. This ability arises from coordinating actions through internal representations of others, a concept known as shared intelligence. Additionally, humans are characterized by physical bodies and cognitive abilities that are optimized in response to their environment, a phenomenon referred to as embodied cognition. Designing humanoid robots that collaborate safely and effectively with people requires unifying these principles. Here we propose an architecture that integrates shared intelligence and embodied cognition to enable robots to physically collaborate with humans, where robot hardware and control are optimized for human metrics, using representations of the human body and motion intelligence. The ultimate goal is to achieve a form of shared embodied intelligence. Specifically, our architecture optimizes robot hardware and physical intelligence parameters with respect to human ergonomic metrics. This is accomplished by modeling human-robot interaction as a function of hardware configurations and embedding human models into the robot's physical intelligence. As a concrete implementation, we present the humanoid robot ergoCub, whose morphology and control have been optimized for collaborative tasks with humans. Our approach provides a framework for designing humanoid robots that prioritize human ergonomics at both the hardware and physical intelligence levels, with applications in industrial and assistive robotics.

Large language models are increasingly being explored as interfaces between humans and robotic systems, yet there remains limited evidence on how such technologies can be used not only for interaction, but also as a structured means of introducing robotics to non-specialist users in real organizational settings. This paper introduces and evaluates a challenge-based method for robotics awareness, implemented through an LLM-enabled humanoid robot activity conducted with employees of AD Ports Group in the United Arab Emirates. In the event, participants engaged with a humanoid robot in a logistics-inspired task environment using voice commands interpreted through an LLM-based control framework. The activity was designed as a team-based, role-driven experience intended to expose participants to embodied AI and human-robot collaboration without requiring prior robotics expertise. To evaluate the approach, a post-event survey remained open for 16 days and collected 102 responses. Results indicate strong overall reception, with high satisfaction (8.46/10), increased interest in robotics and AI (4.47/5), and improved understanding of emerging forms of human-robot collaboration (4.45/5). Participants who interacted directly with the robot also reported natural interaction (4.37/5) and a strong sense that interaction became easier as the activity progressed (4.74/5). At the same time, lower ratings for reliability and predictability point to important technical and design challenges for future iterations. The findings suggest that challenge-based, LLM-enabled humanoid interaction can serve as a promising and replicable method for robotics awareness in industrial and operational environments.

We propose a multimodal, physically grounded approach for metric-scale amodal object reconstruction and pose estimation under severe hand occlusion. Unlike prior occlusion-aware 3D generation methods that rely only on vision, we leverage physical interaction signals: proprioception provides the posed hand geometry, and multi-contact touch constrains where the object surface must lie, reducing ambiguity in occluded regions. We represent object structure as a pose-aware, camera-aligned signed distance field (SDF) and learn a compact latent space with a Structure-VAE. In this latent space, we train a conditional flow-matching diffusion model, pretraining on vision-only images and finetuning on occluded manipulation scenes while conditioning on visible RGB evidence, occluder/visibility masks, the hand latent representation, and tactile information. Crucially, we incorporate physics-based objectives and differentiable decoder-guidance during finetuning and inference to reduce hand--object interpenetration and to align the reconstructed surface with contact observations. Because our method produces a metric, physically consistent structure estimate, it integrates naturally into existing two-stage reconstruction pipelines, where a downstream module refines geometry and predicts appearance. Experiments in simulation show that adding proprioception and touch substantially improves completion under occlusion and yields physically plausible reconstructions at correct real-world scale compared to vision-only baselines; we further validate transfer by deploying the model on a real humanoid robot with an end-effector different from those used during training.

Open-Vocabulary Object Navigation (OVON) requires an embodied agent to locate a language-specified target in unknown environments. Many zero-shot methods rely on frontier-candidate reasoning under incomplete observations, while topology-aware methods reduce candidate redundancy but may still introduce panoramic inspection overhead and repeated reconsideration. We present DRIVE-Nav, a structured framework that organizes exploration around persistent directions rather than raw frontiers. By inspecting encountered directions more completely and restricting subsequent decisions to still-relevant directions within a forward 240-degree view range, DRIVE-Nav reduces redundant revisits and improves path efficiency. The framework extracts and tracks directional candidates from weighted Fast Marching Method (FMM) paths, maintains representative views for semantic inspection, and combines vision-language-guided prompt enrichment with cross-frame verification to improve grounding reliability. Experiments on HM3D-OVON, HM3Dv1, HM3Dv2, and MP3D demonstrate strong overall performance and consistent efficiency gains. On HM3D-OVON, DRIVE-Nav achieves 50.2% SR and 32.6% SPL, improving the previous best method by 1.9% SR and 5.6% SPL. It also delivers the best SPL on HM3Dv1, HM3Dv2, and MP3D and transfers to a physical humanoid robot. Real-world deployment also demonstrates its effectiveness.

Real-time embodied social interaction places two equally demanding requirements on an agent: continuously generating fluent multimodal interaction behavior, and proactively reasoning over accumulated dialogue and visual context to decide when to take initiative. These requirements must both be satisfied under a strict latency budget, making them difficult to meet simultaneously. We present ProAct, a dual-system framework that manages these time-critical requirements by integrating a low-latency Behavioral System for streaming multimodal interaction with a slower Cognitive System that performs long-horizon social reasoning and produces high-level proactive intentions. The Cognitive System incorporates an efficient memory mechanism and a user-motivation prediction module to reason over accumulated dialogue and visual context and determine when proactive intervention is appropriate. The Behavioral System further includes an intention-conditioned streaming flow-matching motion generator with a disentangled ControlNet branch, which translates deliberative intentions into continuous non-verbal behavior without disrupting interaction fluency. We deploy ProAct on a physical humanoid robot and validate the framework through comprehensive experiments, including real-world user studies, motion-generation benchmarks, and evaluation on ProActBench, a new, targeted benchmark for evaluating proactive trigger detection and restraint in embodied interaction.

Realizing versatile and human-like performance in high-demand sports like badminton remains a formidable challenge for humanoid robotics. Unlike standard locomotion or static manipulation, this task demands a seamless integration of explosive whole-body coordination and precise, timing-critical interception. While recent advances have achieved lifelike motion mimicry, bridging the gap between kinematic imitation and functional, physics-aware striking without compromising stylistic naturalness is non-trivial. To address this, we propose Imitation-to-Interaction, a progressive reinforcement learning framework designed to evolve a robot from a "mimic" to a capable "striker." Our approach establishes a robust motor prior from human data, distills it into a compact, model-based state representation, and stabilizes dynamics via adversarial priors. Crucially, to overcome the sparsity of expert demonstrations, we introduce a manifold expansion strategy that generalizes discrete strike points into a dense interaction volume. We validate our framework through the mastery of diverse skills, including lifts and drop shots, in simulation. Furthermore, we demonstrate the first zero-shot sim-to-real transfer of anthropomorphic badminton skills to a humanoid robot, successfully replicating the kinetic elegance and functional precision of human athletes in the physical world.

The design and organization of complex robotic systems traditionally requires laborious trial-and-error processes to ensure both hardware and software components are correctly connected with the resources necessary for computation. This paper presents a novel generalization of the quadratic assignment and routing problem, introducing formalisms for selecting components and interconnections to synthesize a complete system capable of providing some user-defined functionality. By introducing mission context, functional requirements, and modularity directly into the assignment problem, we derive a solution where components are automatically selected and then organized into an optimal hardware and software interconnection structure, all while respecting restrictions on component viability and required functionality. The ability to generate complete functional systems directly from individual components reduces manual design effort by allowing for a guided exploration of the design space. Additionally, our formulation increases resiliency by quantifying resource margins and enabling adaptation of system structure in response to changing environments, hardware or software failure. The proposed formulation is cast as an integer linear program which is provably $\mathcal{NP}$-hard. Two case studies are developed and analyzed to highlight the expressiveness and complexity of problems that can be addressed by this approach: the first explores the iterative development of a ground-based search-and-rescue robot in a variety of mission contexts, while the second explores the large-scale, complex design of a humanoid disaster robot for the DARPA Robotics Challenge. Numerical simulations quantify real world performance and demonstrate tractable time complexity for the scale of problems encountered in many modern robotic systems.

Pneumatically-actuated anthropomorphic robots with high degrees of freedom (DOF) offer significant potential for physical human-robot interaction. However, precise control of pneumatic actuators is challenging due to their inherent nonlinearities. This paper presents the development of a compact 13-DOF upper-body humanoid robot. To assess the feasibility of an effective controller, we first investigate its key dynamic properties, such as actuation time delays, and confirm that its behavior is reproducible across repeated trials. Leveraging this reproducibility, we implement a preliminary data-driven controller for a 4-DOF arm subsystem based on a multilayer perceptron with explicit time delay compensation. The network was trained on random movement data to generate pressure commands for tracking arbitrary trajectories. In comparative evaluations on this subsystem, the data-driven controller achieved lower tracking errors than a traditional PID controller. This result suggests that data-driven approaches are a promising option for controlling complex, high-DOF pneumatic robots.