Vibration

This work proposes a physics-enhanced machine learning approach for the system identification of Linear Time-Varying (LTV) systems under time-varying operating conditions in terms of fast-varying natural frequencies and damping ratios by combining a long short-term memory network with an Extended Kalman Filter (EKF). The proposed approach uses vibration data (displacement and velocity measurements), domain knowledge of modal damping ratios, and a physics-based model that can yield an approximate natural frequencies time-dependency model. The approach is validated using synthetic data generated from a finite element model of a 2-blade offshore wind turbine under realistic environmental and operating conditions. This system displays fast time-varying frequencies due to operating conditions, whose identification is particularly challenging because of the wind and wave loading. The robustness of the proposed approach is assessed under assumed incorrect system information (e.g. damping ratio). The proposed approach is evaluated across different environmental and operating conditions to show its applicability to different operating regimes. The results show the approach can accurately identify the selected fast-varying natural frequency, 1st Fore-Aft (FA-1) mode, with a maximum root mean square error of 0.0012 Hz. The results demonstrate that the model trained on EKF estimates depends on accurate damping values, whereas the model trained on physics-based data exhibits robustness to incorrect damping assumptions. The approach is extended to damping ratio identification for the selected mode by estimating the root mean square error between models trained on EKF estimates and physics-based data. The results show that the approach can yield a good approximation of the FA-1 mode damping ratio using grid search, offering an improvement over covariance-driven stochastic subspace identification.

This article introduces PeriodicCALM, an effective real-time anomaly detection framework designed for cyclostationary data streams. While classical cyclostationary processes feature periodically time-varying statistical properties, real-world signals often contain recurring impulsive components that conceal abnormal behavior. Existing real-time methods for struggle with these dynamics, frequently misinterpreting phase-dependent variability as non-cyclic anomalies and causing excessive false alarms. To address this, PeriodicCALM incorporates cycle-dependent variability to systematically ignore regular cyclic impulses while accurately isolating genuine anomalies. Operating in real time with continuous retraining capabilities, the method adapts dynamically to evolving signal characteristics. Comparative evaluations against the baseline CALM framework using simulated data demonstrate significant improvements in detection accuracy and training efficiency, alongside a reduction in prediction latency. Furthermore, the practical utility of PeriodicCALM is validated on real-world vibration signals collected from a compressor monitoring system.

Robotic neural-thread placement requires regulating the insertion-tool tip relative to tissue that moves with cardiac and respiratory pulsation. This paper develops a preview-based relative-motion controller that estimates latency-delayed periodic surface motion, predicts it over a short horizon, and uses offset-free model predictive control to regulate relative placement while limiting actuator effort and lateral relative velocity. In MuJoCo, the 1-DOF controller achieves 12.0\um\ free-space and 1.9\um\ contact RMS relative-placement error, versus 18.3/176.8\um\ for delayed-feedback impedance and 286.1/275.5\um\ for lab-frame PD, at the cost of higher peak contact force (3.43 versus 2.00mN) since offset-free tracking drives the tip fully to the commanded depth rather than yielding against the tissue. In 3 DOF, coupled preview reduces contact lateral shear from 1.34 to 0.50mm/s with 2.1\um\ lateral RMS error. A feasibility-restored octagonal shear formulation keeps the QP solvable under degraded sensing by adding a bounded shared slack: at 10\um\ RMS per-axis sensing noise, where a matched cost-only controller violates the 0.80mm/s budget in all 10 seeds (mean/maximum 0.988/1.175mm/s), the soft-octagon controller completes all 10 seeds with no fallback and no measured violation (0.653/0.712~mm/s), with its operating envelope characterized up to 15\um\ RMS. A two-vertex Lyapunov certificate for the controller's actual finite-horizon error-feedback gain holds over $-40\%/{+}50\%$ reflected-mass mismatch. The modeled tip is a rigid contact point, and the study is simulation-only: flexible-thread and carrier-needle mechanics, a validated transient-force constraint, biological damage thresholds, and hardware-realistic sensing and timing remain required before deployment.

Multivariate Time Series Classification (MTSC) demands models that can effectively capture complex temporal patterns across multiple scales while remaining computationally efficient. However, existing approaches generally struggle to reconcile fine-grained representation learning, especially under class imbalance and real-world constraints. In this paper, we present FreSH, a Frequency-Segmented Hierarchical Multi-Expert Framework designed to address these challenges. FreSH introduces a new perspective for MTSC by enabling adaptive, multi-scale analysis of temporal signals, allowing different aspects of the data to be modeled in a complementary and coordinated manner. By combining localized specialization with holistic context modeling, FreSH achieves strong representational capacity without incurring excessive computational overhead. An adaptive fusion strategy further enhances flexibility, enabling the model to dynamically emphasize the most informative components of the input. In addition, we incorporate a more robust optimization objective that improves learning stability across varying sample difficulties and class distributions. Extensive evaluations on 30 UEA benchmark datasets and real-world vibration data demonstrate that FreSH consistently outperforms state-of-the-art methods in classification accuracy, while substantially reducing model size and efficiency.

Deep learning is a new way for machinery fault diagnosis but requires extensive labeled data, a scarce resource in industrial settings. We propose Spectral Aliasing Pretext (SAP), a self-supervised learning method that pretrains models on unlabeled vibration data by exploiting spectral aliasing. We deliberately undersample signals to create folded spectrum, then train a Transformer to reconstruct the original unfolded spectrum. This pretext task forces the model to learn frequency-domain invariants characteristic of mechanical faults, without potentially destructive augmentations. Experiments on the CWRU dataset show that SAP learns stable and highly discriminative representations. In a linear probing setting, SAP quickly achieves very high classification performance with only a small fraction of labeled data and low variance. In contrast, full fine-tuning, including fully supervised training, does not lead to more stable or better results. Overall, these findings suggest that SAP combined with linear probing can be more effective and reliable than fully supervised training for fault diagnosis with limited labeled data.

This paper proposes a novel physics-guided spectral deep operator network, termed SpectONet, for solving Euler-Bernoulli beam (EBB) vibration problems. The proposed framework integrates the operator-learning capability of DeepONet with physics-informed constraints and Chebyshev-Gauss-Lobatto (CGL) sensor placement. Unlike conventional DeepONet frameworks, which commonly employ uniformly distributed sensors, SpectONet uses nonuniform spectral sensor locations with a higher concentration of points near the domain boundaries. This sampling strategy improves the finite-dimensional representation of boundary-sensitive structural responses while requiring only a limited number of branch-network inputs. The governing beam equation, together with the associated initial and boundary conditions, incorporated into the training objective to promote physically consistent and generalizable predictions. Numerical experiments on three synthetic EBB vibration problems and a real-world bridge vibration dataset demonstrate the effectiveness of the proposed framework. Comparisons with strong baselines such as, Vanilla DeepONet, PI-DeepONet, PINN, and CNN-UNet show that SpectONet consistently achieves lower prediction errors across all considered evaluation metrics. In particular, SpectONet achieves at least $64\%$ improvement over the considered baseline models across the three synthetic problems and at least $37\%$ for the real-world problems. These results demonstrate that SpectONet provides an accurate, computationally efficient, and physically consistent operator-learning framework for structural vibration analysis.

A cable-driven continuum robot arm is an underactuated mechanism and may suffer residual vibration at the end of a rest-to-rest maneuver. In this work, a time-delay filter is applied as an input shaper to the system to eliminate the excitation of vibratory modes. A non-robust and a robust time-delay filter are designed based on a linear system model and demonstrate improved response compared to a velocity-driven pulse input. Experimental results using the continuum robot validate the application of the input shaper, with reduced overshoot and settling time exemplifying the reduction in oscillation at the end of the maneuver. It is also shown that utilizing the robust shaper further improves the response of the arm in comparison to applying the non-robust shaper. These results are significant towards the precise and robust implementation of continuum robots in applications involving arbitrary end-effector trajectories.

Industrial health management increasingly relies on heterogeneous information sources, including condition monitoring systems, supervisory control and data acquisition systems, maintenance records, inspection results, and prognostic models. Although large language models provide new opportunities for cross-source reasoning, industrial data and analytical outputs differ substantially in structure, temporal resolution, physical meaning, and reliability. Directly integrating such heterogeneous information into a monolithic model may reduce interpretability, traceability, and adaptability to equipment and data changes. This paper introduces Industrial Tokenization, a conceptual interface for transforming source-specific analytical outputs into structured and machine-interpretable units of industrial evidence, termed Industrial Tokens. Unlike numerical tokens used to encode raw time-series data, Industrial Tokens represent domain-grounded evidence together with source, temporal scope, operating context, analytical meaning, quality or confidence information, and provenance. Based on this concept, a federated industrial architecture is proposed, where heterogeneous analytical subsystems retain autonomy while exposing standardized Industrial Tokens to a central reasoning layer. As an initial implementation, this study presents an end-to-end DiagnosisToken pathway based on vibration-diagnostic outputs, rule-based event aggregation, structured textual token generation, and LLM-based interpretation. Other Industrial Tokens, including SCADA-based condition-monitoring tokens, maintenance tokens, and prognostic tokens, are reserved as future extensions. The proposed framework positions Industrial Tokenization as a semantic interface between domain-specific industrial intelligence and LLM- or agent-based reasoning, rather than another method for encoding raw industrial data.

In bearing vibration datasets, most samples receive predicted fault probabilities close to 0 or 1, while samples with intermediate (gray-zone) probabilities are rare. Such borderline samples are important because they reflect conditions in which maintenance decisions may require additional inspection or a conservative response and are useful for studying decision boundaries. To address this scarcity, this paper proposes and compares two approaches that generate vibration signals whose predicted fault probability matches a target probability of 0.25, 0.50, or 0.75. We use the average output of a heterogeneous ensemble classifier with different architectures and random initializations as a fixed, gradient-accessible probability oracle. The first, training-based approach, Probability-Regularized Generative Adversarial Network (PR-GAN), extends Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) and edits a real signal through a residual generator while pushing the classifier output toward the target probability. The second is a training-free, per-sample Wachter-style counterfactual (CF) procedure that directly optimizes each input signal to reach the target probability while remaining close to the source signal. We evaluate both methods on the Case Western Reserve University (CWRU) and Paderborn bearing datasets using mean absolute target-probability error, time-domain total variation, and frequency-domain log power spectral density (log-PSD) differences. Across all settings, CF reaches the target with a mean absolute probability error of 0.005-0.008 and a within-tolerance success rate of 1.000 on retained samples, whereas PR-GAN's mean error is 0.046-0.059 with success rates between 0.501 and 0.680. CF therefore steers the probability more reliably and requires smaller average L1 changes, whereas PR-GAN has a lower reported runtime in most settings.

LiDAR-inertial odometry (LIO) is a key component of autonomous navigation, but high-dynamic driving exposes two coupled challenges: intra-scan motion distortion and vibration-contaminated inertial measurements. Most real-time LiDAR-inertial pipelines propagate the system state by integrating raw IMU measurements and then use the propagated trajectory for point cloud de-distortion, thereby propagating inertial noise into both the corrected scan and the subsequent scan-to-map registration. This paper presents WNOJ-LIO, a LiDAR-IMU fusion framework based on a White-Noise-on-Jerk (WNOJ) Extended Kalman Filter (EKF). WNOJ-LIO employs a decoupled WNOJ prior on $\R^3 \times \SO(3)$ for state prediction and treats the IMU as a high-frequency measurement source rather than the driver of state propagation. The resulting posterior state history is then used for LiDAR scan de-distortion and subsequent point-to-plane LiDAR updates. The decoupled process model enables closed-form covariance propagation, thereby bridging the gap between batch WNOJ Gaussian process (GP) trajectory priors and recursive filtering. Simulation results demonstrate improvements in acceleration and angular-velocity denoising, scan de-distortion, and localization accuracy over a FAST-LIO-style baseline. Real-world experiments were conducted using an autonomous racing car on four driving segments with maximum speeds ranging from 53 to 208~km/h, covering a wide range of vehicle vibration levels. The experiments further validate the proposed method and provide a comprehensive evaluation of its performance in estimating acceleration, angular velocity, body-frame linear velocity, attitude, and position under highly dynamic driving. The source code of WNOJ-LIO is publicly available at https://github.com/LvJohny/wnoj-ekf-lio.git.

Indoor robotics research increasingly relies on micro-UAVs whose airframe, electronics, and control software are fully open to modification. Off-the-shelf platforms rarely expose the low-level access required for such modifications, while building a custom alternative typically requires substantial engineering effort before flight testing can begin, leaving many laboratories to work within constraints that limit the scope of their research. We present MIRA (Modular Indoor Research Architecture), a low-cost, open-source micro-UAV for indoor research built around a replicable 3D-printed PLA airframe and a containerized low-level software package managing the companion-to-autopilot communication bridge via Micro XRCE-DDS. Designed as a white-box architecture, core subsystems are individually replaceable without firmware refactoring, supporting local fabrication and component substitution from existing lab inventory. We characterize MIRA through manual flight in position-control mode within an optical motion-capture volume, where the communication pipeline sustains a median companion-to-autopilot latency of 0.02 ms and power spectral density analysis confirms the structural vibration energy stays concentrated in a narrow 90 to 110 Hz band, isolated from the sub-20 Hz control bandwidth and within the autopilot safety thresholds.

Dexterous manipulation depends on contact events that are fast, local, and often visually occluded. Piezoelectric microphones offer a compact and high-bandwidth way to sense these interactions, but the resulting vibro-acoustic signals are difficult to simulate faithfully enough for end-to-end sim-to-real policy learning on dexterous robot hands. We propose VibeAct, a framework that bridges real vibrotactile sensing and simulation-based reinforcement learning through a shared physical representation of contact and slip. In the real world, we embed piezoelectric microphones into a dexterous robot hand and collect vibro-acoustic data through teleoperation, then replay the recordings in a calibrated digital clone to automatically label per-finger contact and slip. A tactile estimator learns to predict contact and slip from real microphone waveforms, while manipulation policies are trained in simulation on the same representation computed directly from simulated contacts. This decoupling lets policies exploit rapid tactile feedback without simulating raw audio. Across five contact-rich tasks spanning regrasping, in-hand reorientation, and insertion, VibeAct consistently outperforms a proprioception-and-point-cloud baseline in simulation, with the largest gains on tasks requiring sustained reactive control, where the continuous slip-magnitude channel proves the most informative observation. The learned policies transfer to a physical dexterous hand-arm platform, improving success rates on deployed tasks. Project videos and additional details are at https://vibeact.github.io/.

Singing style is a crucial aspect of a natural and expressive singing voice. Singers utilize singing styles to convey the feeling or emotion of the songs. Several works have been proposed to control singing style for making the more expressive singing voice. Recently, VibE-SVC successfully controls vibrato by predicting high-frequency F0 contour. In this paper, we introduce a singing voice conversion framework, called VibE-SVC2, to improve singing style conversion performance and controllability. The model offers control over two types of singing styles: a pitch style and a timbre style. For the pitch style, to resolve the pitch-energy entanglement issue that is unresolved in our previous work, we introduce a novel Energy Style Converter to address remaining style information in the energy contour. In addition, we propose a Zero-shot Pitch Style Converter, which mimics the pitch style of reference audio. To expand the controllability of the model, we propose vibrato rate scaling that is an independent control of vibrato extent, which is unavailable in VibE-SVC. For the timbre style, we extend the model to handle a variety of phonation styles. However, addressing specific styles such as vocal fry poses a challenge, as conventional F0 extraction often fails due to their inherent subharmonic characteristics, which degrades the conversion quality. To address this, we propose a novel Subharmonic Correction algorithm to refine the F0 contour for more natural timbre conversion. Through comprehensive objective and subjective evaluations, we demonstrate that VibE-SVC2 provides fine-grained, independent control over two types of singing styles, outperforming existing methods.

A mobile phone vibrating on a hard surface often sounds qualitatively unlike ordinary audiovisual recordings when reproduced through laptop loudspeakers. We propose that part of this perceptual distinctiveness can be described as a nested periodicity: a first-order cepstral structure reflecting the vibration period and its multiples, and a second-order cepstral structure reflecting repeated spacing within the first-order cepstrum. Treating the perceptual effect as real and using a deliberately transparent synthetic signal chain, we model six stages: mechanical generation, surface and air propagation, microphone capture, encoding and decoding, laptop-speaker playback, and re-recording or post-processing. The synthetic analysis shows that the first-order cepstral periodicity is preserved across the chain, whereas a cleaner bimodal or quasi-bimodal second-order cepstral signature is most evident at the mechanical source and at laptop-speaker playback. The result supports, but does not prove, the hypothesis that laptop reproduction can re-emphasize a latent contact-vibration periodicity that is less cleanly expressed in intermediate recorded and encoded forms. We frame second-order cepstral bimodality as an exploratory descriptor of contact-vibration playback rather than as a completed perceptual metric. Required validation includes recordings of real devices, controlled playback transfer functions, perceptual judgments, and comparisons against ordinary speech, music, and environmental recordings.

In this paper, we use asymmetric vibrations to demonstrate two degree-of-freedom (DoF) in-hand manipulation of grasped parts. The asymmetric vibrations are achieved through closed-loop position control of a moving surface, which applies a periodic stick-slip waveform to the part to be manipulated. We show analytically how two vibratory waveform parameters, the sticking acceleration and the slipping acceleration, affect average part velocity when moving against gravity. The theoretical trends are then validated using an experimental setup where the squeeze force is controlled and part motion is recorded by a high-resolution encoder. We also develop a 2-DoF vibratory surface capable of translation in one direction and rotation about the surface normal. Using two of these 2-DoF surfaces in a parallel jaw gripper configuration, we bidirectionally translate and rotate a variety of grasped parts, as well as demonstrate that the same waveform trends for translation also persist for in-plane rotation.

Flexible robotic manipulators (FRMs) offer advantages in lightweight design and large workspace, but their structural flexibility induces vibrations, accelerates fatigue, degrades tracking performance, and limits operational speed. These challenges are further amplified in multi-link serial manipulators, where increased overall length leads to greater structural flexibility. This article presents a backstepping output-feedback framework for fast vibration suppression and tip tracking of an n-degree-of-freedom serial flexible manipulator robot (nDSFMR), with a DeepONet-based approximation for practical deployment. Each link-joint is modeled as a Timoshenko beam coupled with an ODE and transformed into a canonical hyperbolic PDE with boundary dynamics. A backstepping-based boundary controller at the joint is developed to equivalently inject distributed damping along the beam, enabling rapid vibration suppression and trajectory tracking, only using available boundary measurements. To enable real-time implementation and scalability, a DeepONet neural operator is introduced to approximate the backstepping kernels, significantly reducing computational cost and facilitating fast controller updates under varying operating conditions. Experiments on a two-link flexible manipulator demonstrate faster vibration suppression and convergence of the end-effector to the desired trajectory, compared with a linear quadratic regulator (LQR) with feedforward control.

Text-to-vibration generation converts natural language into haptic feedback, enabling vibration-effect designers to get scenarios-fitted vibrations more efficiently, which shows great potentials in application fields such as metaverse, games, and film to enrich the user experience in interactive scenarios. The core challenge in this field is how to generate accurate, consistent, and complete vibrations according to textual semantics. Very recent autoregressive (AR) approaches (e.g., HapticGen) exhibit limited capacity in fully capturing global dependencies, owing to the inherent sequential nature of their modeling and prevailing data constraints. In this paper, we proposed HapticLDM, the first text-to-vibration generative model built upon Latent Diffusion Models (LDMs). Firstly, with respect to the data, we introduced a text-processing strategy that emphasizes dynamic characteristics to curate high-quality data pairs for fine-grained dynamic modeling. Secondly, HapticLDM incorporates a global denoising mechanism that regulates coherent and stable variations in the temporal envelope. Furthermore, we conduct extensive evaluations, including A/B testing against the state-of-the-art baseline and a user study involving 30 participants. The results demonstrate that our model enhances realism and semantic alignment. Qualitative feedback further indicates that HapticLDM simplifies the haptic design workflow while generating diverse, subtle, and physically precise vibrations.

Optical vibration sensing enables recovering the scene sound directly from the surface vibration of nearby objects, turning everyday objects into ``visual microphones''. However, most prior methods had focused on capturing the vibrations of specific objects with highly favorable vibration responses. These include objects where the surface vibrations are generated by the object itself (e.g., speaker membrane or guitar body) or objects consisting of a thin membrane which is highly reactive to sound (e.g., a chip bag or the leaf of a plant). In this paper, we tackle sound recovery for a more challenging class of solid objects whose vibration responses are poor or highly resonant. We simultaneously capture vibrations for multiple surface points on the object using a speckle-based vibrometry imaging system. Then, we derive a novel physics-guided vibration formation model that relates the scene sound source to the captured multi-point multi-axis vibrations via the object's vibrational modes. The model is then used to reverse the resonant transfer function of the vibrating object, fusing multiple vibration signals to estimate the original sound source in the scene. We evaluate our approach by recovering sound from a variety of everyday objects, demonstrating that it significantly outperforms traditional single-point speckle vibrometry in challenging scenarios and other signal-processing-based methods for multi-signal fusing.

The second-order harmonic (2f) component generated by twin-rotary compressor is a dominant low-frequency noise source of variable refrigerant flow (VRF) outdoor units, yet its amplitude fluctuates strongly with environmental thermal load and valve opening, making it difficult to assess accurately using conventional mechanism-based models. This paper proposes an unsupervised transfer learning method based on Domain-invariant Partial Least Squares (Di-PLS) to accurately predict 2f noise levels under new conditions using different signals. Prediction models utilizing thermodynamic signals and acceleration signals are constructed respectively, and the generalization performance of the proposed Di-PLS is systematically compared with traditional Partial Least Squares (PLS). Results demonstrate that Di-PLS significantly outperforms PLS by extracting cross-condition common features and minimizing the distribution discrepancy between the source and target domains. Specifically, the acceleration-based Di-PLS model achieves the best performance, maintaining prediction errors within 3 dB for all test cases. This superiority over thermodynamic-based models highlights a physical insight: while thermodynamic states drive dynamic changes, structural vibration possesses a stronger and more direct causal link to acoustic radiation.

This study proposes an anomaly-detection framework for monitoring exposure-length variations in submarine free-span cables using Distributed Acoustic Sensing (DAS), which is one of the distributed fiber-optic sensing technologies. To address environmental variability and limited training data in offshore environments, a regression-based feature extraction method was introduced to derive low-dimensional latent representations that retain exposure length-dependent vibration characteristics while suppressing environmental influences. The extracted features were used for one-class Support Vector Machine (SVM)-based anomaly detection. The proposed framework was evaluated through wave-tank experiments with exposure lengths ranging from 2 to 10 m. Experimental results showed that anomaly scores decreased approximately monotonically with increasing exposure-length change, exhibiting a strong correlation ($r = -0.83$). The binary classification achieved an F1 score of 0.82 despite training with only small-sample datasets. These findings demonstrate that exposure-length variations can be reliably detected under severe data limitations, supporting the potential of DAS-based cable condition monitoring.

Individual differences in vibrotactile perception underscore the growing importance of personalization as haptic feedback becomes more prevalent in interactive systems. We propose Vibrotactile Preference Learning (VPL), a system that captures user-specific preference spaces over vibrotactile parameters via Gaussian-process-based uncertainty-aware preference learning. VPL uses an expected information gain-based acquisition strategy to guide query selection over 40 rounds of pairwise comparisons of overall user preference, augmented with user-reported uncertainty, enabling efficient exploration of the parameter space. We evaluate VPL in a user study (N = 13) using the vibrotactile feedback from a Microsoft Xbox controller, showing that it efficiently learns individualized preferences while maintaining comfortable, low-workload user interactions. These results highlight the potential of VPL for scalable personalization of vibrotactile experiences.

Damage identification is a core task in structural health monitoring. In practice, however, its reliability is often compromised by confounding non-damage effects, such as variations in excitation and environmental conditions, which can induce changes comparable to or larger than those caused by structural damage. To address this challenge, this study proposes a self-supervised label-free disentangled representation learning framework for robust vibration-based structural damage identification. The proposed framework employs an autoencoder with two latent representations to learn directly from raw vibration acceleration signals. A self-supervised invariance regularization, implemented via Variance-Invariance-Covariance Regularization (VICReg), is imposed on one latent representation using baseline data where structural damage is assumed constant but operational and environmental conditions vary. In addition, a frequency-domain constraint is introduced to enforce agreement between the power spectral density reconstructed from the latent representation and that computed from the corresponding input time series. Together, these mechanisms promote disentanglement, enabling the learned representation to be sensitive to damage-related characteristics while remaining invariant to nuisance variability. The framework is trained in a fully end-to-end and label-free manner, requiring no prior information on damage, excitation, or environmental conditions, making it well-suited for real-world applications. Its effectiveness is validated on two distinct real-world vibration datasets, including a bridge and a gearbox. The results demonstrate robustness to operational variability, strong generalization capability, and good performance in both damage detection and quantification.

The digital transformation of industrial manufacturing increasingly relies on the ability of autonomous robots to interact with legacy infrastructure, particularly analog gauges. While Vision-Language Models (VLMs) have demonstrated potential in zero-shot instrument recognition, their deployment in measurement systems remains constrained by an inherent inability to accurately analyze high-frequency temporal events and needle vibrations. This paper evaluates state-of-the-art models, including GPT-5 and Gemini 3, against the strict requirements of metrology and uncertainty quantification. To facilitate this evaluation, we introduce a novel dataset comprising video sequences of various gauge types: circular, linear, and Vernier, under diverse motion speed profiles. Our findings indicate that current VLMs exhibit limited ability in interpreting needle trajectories and scale semantics, failing to provide the traceability and reliability needed for safety-critical monitoring. The results demonstrate that these models have not yet achieved the performance necessary to be classified as trustworthy synthetic instruments under existing IEEE and ISO standards.

The ambulance service is the main transport for diseased or injured people which suffers the same acceleration forces as regular vehicles. These accelerations, caused by the movement of the vehicle, impact the performance of tasks executed by sanitary personnel, which can affect patient survival or recovery time. In this paper, we have trained, validated, and tested a system to assess driving in ambulance services. The proposed system is composed of a sensor node which measures the vehicle vibrations using an accelerometer. It also includes a GPS sensor, a battery, a display, and a speaker. When two possible routes reach the same destination point, the system compares the two routes based on previously classified data and calculates an index and a score. Thus, the index balances the possible routes in terms of time to reach the destination and the vibrations suffered in the patient cabin to recommend the route that minimises those vibrations. Three datasets are used to train, validate, and test the system. Based on an Artificial Neural network (ANN), the classification model is trained with tagged data classified as low, medium, and high vibrations, and 97% accuracy is achieved. Then, the obtained model is validated using data from three routes of another region. Finally, the system is tested in two new scenarios with two possible routes to reach the destination. The results indicate that the route with less vibration is preferred when there are low time differences (less than 6%) between the two possible routes. Nonetheless, with the current weighting factors, the shortest route is preferred when time differences between routes are higher than 20%, regardless of the higher vibrations in the shortest route.

Preventing machine failure is inherently superior to reactive remediation, particularly for critical assets like gas turbines, where early fault detection (FD) is a cornerstone of industrial sustainability. However, modern deep learning-based FD models often face a significant trade-off between architectural complexity and real-time operational constraints, often hindered by a lack of temporal context within restricted vibration signal windows. To address these challenges, this study proposes a Temporal Cross-Modal Knowledge-Distillation Transfer-Learning (TCMKDTL) framework. The framework employs a "privileged" teacher model trained on expansive temporal windows incorporating both past and future signal context to distill latent feature-based knowledge into a compact student model. To mitigate issues of data scarcity and domain shift, the framework leverages robust pre-training on benchmark datasets (such as CWRU) followed by adaptation to target industrial data. Extensive evaluation using experimental and industrial gas turbine (MGT-40) datasets demonstrates that TCMKDTL achieves superior feature separability and diagnostic accuracy compared to conventional pre-trained architectures. Ultimately, this approach enables high-performance, unsupervised anomaly detection suitable for deployment on resource-constrained industrial hardware.

This letter presents a CWT-enhanced vibration sensing framework for bearing fault monitoring through localized time-frequency region detection on continuous wavelet transform (CWT) spectrograms. Vibration signals are transformed into CWT spectrograms to improve the observability of weak and non-stationary fault signatures, and YOLOv9, YOLOv10, and YOLOv11 are employed to detect and identify localized fault-related energy regions in the time-frequency domain. Experiments on the CWRU, PU, and IMS datasets show that the proposed framework improves the detectability and robustness of fault-related sensing patterns compared with conventional time-series models, modern vision backbones, and short-time Fourier transform (STFT)-based representations, achieving mean average precision (mAP) values up to 99.4%, 97.8%, and 99.5%, respectively. In addition, the localized region detection framework provides a more interpretable relationship between time-frequency energy distributions and characteristic bearing fault frequencies. These results demonstrate an effective and generalizable approach for interpretable vibration sensing in noisy industrial environments.

Event cameras are a bio-inspired class of sensors that asynchronously measure per-pixel intensity changes. Under fixed illumination conditions in static or low-motion scenes, rigidly mounted event cameras are unable to generate any events and become unsuitable for most computer vision tasks. To address this limitation, recent work has investigated motion-induced event stimulation, which often requires complex hardware or additional optical components. In contrast, we introduce a lightweight approach to sustain persistent event generation by employing a simple rotating unbalanced mass to induce periodic vibrational motion. This is combined with a motion-compensation pipeline that removes the injected motion and yields clean, motion-corrected events for downstream perception tasks. We develop a hardware prototype to demonstrate our approach and evaluate it on real-world datasets. Our method reliably recovers motion parameters and improves both image reconstruction and edge detection compared to event-based sensing without motion induction.