Robot Teleoperation

Markerless, single-RGB-D-camera motion capture provides a low-cost and non-invasive alternative to conventional marker-based systems for robot teleoperation; however, depth estimation often degrades in the presence of self-occlusion, particularly during upper-limb motion. This paper presents an Arm Kinematic Correction (AKC) method that improves depth estimation by enforcing geometric constraints based on constant arm lengths. The proposed approach reconstructs occluded joint depths by leveraging wrist positions and predefined arm lengths via a deterministic formulation based on the Pythagorean theorem, thereby avoiding the need for complex probabilistic modeling or parameter tuning. Experimental validation against a Vicon reference system demonstrates reliable performance for both static and dynamic joint motions, evaluated using root-mean-square error (RMSE) and Pearson correlation. Furthermore, motion-mapping teleoperation is successfully demonstrated in both simulated and physical robot environments. The results show that AKC enhances robustness and preserves anatomical consistency under long-duration, severe self-occlusion, even when paired with less reliable temporal filters, highlighting its practicality for real-time applications such as robot teleoperation and human-robot interaction.

Many real-world manipulation scenarios, such as handling complex collaborative tasks and dealing with large workspaces, require coordination of more than two robotic arms. Consequently, an effective multi-arm teleoperation system is required to collect demonstrations for training coordinated multi-arm manipulation policies. However, existing teleoperation frameworks mainly focus on single-operator or multi-operator setups, facing a practical trade-off between the cognitive load placed on a single operator and the coordination cost incurred by multiple operators. To address this problem, we introduce HATS, a human-agent teleoperation system that enables a single human operator, assisted by an MLLM-based agent, to collect data for multi-arm manipulation tasks. Our system decouples the control space: two primary arms are directly teleoperated by the human, while two assistive arms are controlled by a training-free agent that handles sub-tasks. In addition, the human operator can use voice commands to prevent collisions and correct assistive arm behaviors during execution. Extensive evaluations demonstrate that HATS achieves data collection efficiency and success rates comparable to expert dual-human teams. Moreover, downstream policy evaluations demonstrate the efficacy and quality of the data collected through HATS.

Vision-Language-Action (VLA) models perform well in generalist robot manipulation but remain brittle to out-of-distribution perturbations, while full human teleoperation is cognitively demanding. To bridge this gap, we introduce Shared Autonomy for Policy Steering (SAPS), a lightweight framework that blends real-time human teleoperation commands with pretrained VLA actions. SAPS operates purely at the action level, requiring no policy retraining, auxiliary dynamics models, or architectural modifications. We evaluate three arbitration strategies across simulated (LIBERO, CALVIN) and real-world evaluations. In a 14-person user study, SAPS achieved up to 77.4% hardware success, compared with 8.3% for full autonomy and 34.5% for teleoperation. Furthermore, active human intervention was required only 45% of the time, reducing NASA-TLX workload by 20.8% in simulation and 28.2% on hardware. A case study with an expert user with quadriplegia similarly demonstrated matched or improved success while reducing completion time. These results highlight SAPS as a highly effective, model-agnostic approach for reliable real-world deployment and assistive teleoperation. A website with additional details is located at shared-autonomy-policy.github.io.

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

For robots to work safely in household environments, they need to be compliant and react to torque and force feedback during contact. However, the majority of existing data collection pipelines still lack the ability to capture force and torque data for learning active compliant policies. In this paper, we present Universal Manipulation Exoskeleton (UME), an upper-limb exoskeleton that provides real-time haptic torque feedback while recording whole-arm configurations and joint torque signals for teleoperation. With transparent torque feedback, human operators can even unsheathe kinematically constrained objects while blindfolded. UME is low-cost, lightweight, and portable. Equipped with an embedded IMU, it enables teleoperation for mobile manipulation. With our proposed universal retargeting algorithm, UME can teleoperate a range of robots, including the 7DoF OpenArm, 7DoF Franka, and 6DoF X-ARM. We demonstrate that this combination of capabilities enables learning bimanual, whole-body, and active compliant policies that operate effectively in highly constrained spaces. The learned robust autonomous policies achieve high success rates across a variety of tasks, including long-horizon mobile manipulation, force-mediated box flipping, visually occluded box pushing, and space-constrained tabletop manipulation. Videos, code, and additional information can be found at https://ume-exo.github.io.

Humans rely on directional fingertip forces to probe and regulate contact during manipulation, yet most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous. Without directional cues, users must infer contact force from vision alone, often leading to over-pressing, inconsistent control, and reduced precision in robotic teleoperation. We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback. Through benchtop validations and a user study involving haptic teleoperation of a robotic arm and hand, we demonstrate that compared to visual-only and single-axis haptic baselines, planar fingertip feedback significantly reduces contact force error during precise manipulation, improves trial-to-trial consistency, and enhances overall user experience in axial probing tasks. These findings establish the N2D Haptic Glove and directional finger-based haptics devices as a promising modality for contact-rich teleoperation, immersive virtual reality simulations, and robot learning from demonstrations. N2D Haptic Glove's hardware and software system will be fully open-sourced at this https URL.

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

We introduce Yielding Universal Bidigital Interface (YUBI), a finger-aligned gripper designed to enable intuitive, ergonomic, and scalable data collection for bimanual dexterous manipulation. While handheld data collection systems such as Universal Manipulation Interface (UMI) enable affordable data collection, their bulky pistol-grip designs can pose ergonomic and usability challenges for fine-grained, dexterous manipulation tasks. To address this, YUBI presents a distinct design principle: yielding, finger-driven actuation that directly maps human finger movements to gripper jaw motion. Using the YUBI devices, we set up a data collection system with integrated VR-based 6 DoF tracking of the gripper, ensuring high-fidelity trajectory data acquisition. We curate a UMI-based dataset of unprecedented scale: 8,434 hours across 1.20M episodes and 119 tasks. Experiments show that YUBI offers advantages over the UMI gripper in versatility for complex bimanual tasks, dexterity, and operational efficiency. A single policy trained on the YUBI dataset transfers across multiple bimanual robots (UR, Franka, and ELEY) simply by mounting the gripper on each platform, confirming that the collected data are directly executable as policy supervision. We release the gripper hardware, data-collection software, and dataset as one integrated stack, offering the open community a reproducible path to large-scale data acquisition for advancing robotic foundation models.

In teleoperation, the human operator typically controls only the end-effector pose, which often leads to self-collisions of the manipulator and collisions with environmental obstacles, since joints and links are not controlled individually. A common strategy to mitigate this issue is to enhance the operator's input using optimal-control-based trajectory planning. As derivative-based solvers require differentiable constraints, existing approaches either approximate robots and obstacles with spheres, reducing geometric accuracy, or approximate derivatives, degrading convergence and increasing computation times. We address these limitations by adapting a recent formulation of differentiable collision-avoidance constraints, based on duality in convex optimization, to the teleoperation setting. The robot is approximated with capsules and the environment with polytopes. We compare the resulting trajectory planning method against state-of-the-art techniques in simulation with varying numbers of obstacles and evaluate it on a UR5e manipulator in a real-world teleoperation test. Results show that our approach achieves lower computation times while enabling more accurate obstacle modeling, leading to smoother and collision-free end-effector teleoperation.

Action segmentation supports intention estimation and execution monitoring in assisted teleoperation, but robot demonstrations are costly to collect. We propose an uncertainty-aware framework that transfers temporal knowledge from human to robot demonstrations through MS-TCN++~\cite{li2020mstcnpp} pretraining and fine-tuning, reliability-aware sequence correction, and class-conditional conformal prediction. Across 22 toy-car assembly action classes, fine-tuning with 9 robot demonstrations improves test Edit score from 55.23 to 72.51 and segmental F1@50 from 10.97 to 16.86. The reliability analyzer identifies incorrect segments with 0.755 AUROC. Unrestricted correction reduces Edit to 67.86, while selective acceptance maintains 73.45, primarily safeguarding against harmful relabeling. Conformal prediction achieves 95.38% empirical coverage at a 93% target, but prediction sets average 17.41 of 22 classes. These findings support human temporal pretraining while revealing persistent challenges in reliable correction and informative uncertainty quantification with limited robot supervision.

Remote communication technologies have become widely used; however, supporting a sense of shared physical space and conveying rich non-verbal cues remain challenging in many social interaction scenarios. This study presents "Yui," a full-body cybernetic android avatar designed to integrate operator-side immersive teleoperation with interlocutor-side human-like social signaling. Yui combines a 55-degrees of freedom full-body mechanism with a previously developed android head, facial expression and gaze control, upper-body and arm motion, hand actuation, and a mobile platform. It can be operated through either the immersive mode using a head mounted display-based interface or desktop mode using a webcam-based interface. We evaluated the system through three real-world deployments: a long-term public exhibition at Expo 2025 in Osaka, Kansai, Japan; a remote educational exchange between elementary school students; and a public interaction study with general participants. During the Expo deployment, two units accumulated approximately 1131 h of operation, demonstrating both operational feasibility and maintenance challenges. In the public study, both operators and interlocutors reported positive impressions of co-presence and willingness to use the system. Interlocutors also rated the avatar positively in terms of human likeness and the transmission of emotions and intentions. The results indicate usability for general operators while suggesting room for improvement in precise controllability. These findings provide field-derived evidence and design implications for socially deployable full-body android avatars.

Whole-body teleoperation is essential for scalable robot data collection in loco-manipulation tasks, yet existing approaches relying on exoskeleton suits or multi-camera setups impose prohibitive cost, complexity, and environmental constraints. Recent methods using a single extended reality (XR) device with end-to-end reinforcement learning policies partially address these limitations but require robot-specific retraining, suffer from out-of-distribution failures, and rely on motion retargeting that neglects dynamic feasibility. We propose a hierarchical whole-body teleoperation framework driven by a single XR device that generalizes across diverse robot morphologies without retraining robot-specific policies. A Model Predictive Control (MPC)-based motion retargeter jointly optimizes alignment with the operator's intent and the robot's dynamic feasibility, generating optimal commands for existing low-level controllers. To ensure robust online execution, we introduce a state synchronization method that resets the simulator state at each MPC step to handle noisy real-world measurements and contact sensitivity, and integrate SLAM-based global pose feedback to mitigate long-term drift. Simulation results show higher success rates on whole-body control tasks for both a humanoid (over 30% lower completion time and 20% lower power consumption) and a mobile manipulator (zero collisions) compared to baselines. Real-world experiments further validate the effectiveness and flexibility of our method, demonstrating the successful deployment of the proposed retargeter on both platforms for whole-body control tasks and the ease of allowing users to adjust teleoperation behavior based on their preferences. This plug-and-play framework offers a scalable, morphology-agnostic solution for whole-body robot teleoperation, enabling real-time behavioral customization and broad applicability across platforms.

Multi-operator control of robot teams requires not only access to the same mission information, but also mechanisms for maintaining shared awareness and preventing conflicting interventions. Building on our previous HORUS interface (Holistic Operational Reality for Unified Systems) we present a mixed-reality interface that extends single-operator multi-robot supervision to collaborative multi-operator use. The system supports two complementary modes: a co-located shared workspace, in which operators observe and manipulate the same mini-map in the same physical location, and a private-workspace mode, in which operators work on the same mission through independently placed local workspaces. The architecture combines registration-driven scene construction, lightweight shared-session synchronization, and per-robot control leases to support collaborative monitoring, tasking, and teleoperation while preventing conflicting commands. We evaluated the approach in a human-subject study with 36 participants (18 pairs) controlling three Nova Carter mobile robots in two search environments. The performance of the objective task was comparable across the two modes, indicating that both modes supported effective mission execution. However, the co-located shared workspace significantly improved perceived collaboration, shared understanding, and handoff clarity, and was the preferred collaborative mode. These results indicate that physically co-locating the MR workspace improves how operators coordinate even when the underlying robot-control tools remain unchanged.

Learning dexterous manipulation requires demonstrations that preserve fine hand-object interactions while remaining executable at deployment. Existing pipelines either lose deployable dexterity through retargeting or embodiment conversion, or rely on robot-specific teleoperation that is costly to scale and often lacks intuitive, contact-aware control for dexterous data collection. We present RealDexUMI, a wearable universal manipulation interface built around a shared dexterous end-effector module that integrates a lightweight dexterous hand, in-hand vision, and fingertip tactile sensing. A palm-side isomorphic teleoperation glove maps human finger inputs to robot-hand joint commands, enabling real-time, retargeting-free, intuitive, and precise hand control. The shared hand and sensing modules yield zero-gap end-effector data, with matched in-hand observations, tactile signals, contacts, and hand actions between collection and deployment. Across eight real-robot tasks spanning fine-grained, contact-rich, long-horizon, and bimanual manipulation, policies trained on RealDexUMI data achieve an average success rate of 88.75%, generalize to unseen initial poses, and transfer across three embodiments. Website: https://research.beingbeyond.com/realdexumi

Despite the importance of tactile sensing for reliable manipulation, most existing Vision-Language-Action (VLA) datasets remain vision-only, and those that do incorporate tactile information typically lack the joint combination of task diversity, language conditioning, and action trajectories. Furthermore, existing teleoperation pipelines rarely provide haptic feedback to the operator, despite its established role in demonstration quality and manipulation stability. In this work, we present HapTile, a contact-grounded visuotactile manipulation dataset that advances beyond vision-only trajectory datasets by embedding physical interaction sensing at two levels: fingertip tactile feedback at the robot end-effector, and haptic-informed demonstrations at the teleoperator side. The data collection platform integrates haptic feedback directly into the teleoperation controller, enabling the operator to perceive contact interactions in real time. It is built around a standard and reproducible robotic system equipped with custom-designed fingertip tactile sensors. The dataset comprises everyday manipulation tasks spanning a broad range of contact-rich skills, including pick-and-place, folding, pressing, stacking, and other routine activities. Each task is paired with language instructions that condition the policy on the manipulation objective, together with synchronized visuotactile observations and action trajectories. In addition, we provide a benchmarking study on contact-rich policy learning using two baseline models to evaluate the effectiveness of the proposed contact-grounded dataset. The dataset and additional details are available on our website: haptile-dataset.github.io.

Haptic guidance in teleoperation enhances operator performance through force feedback. This paper presents guidelines to select the most appropriate model considering the task, the environment and the operator. We define a unified formulation expressing most common models (spring-damper, potential field, and guiding tube) as variations of a stiffness-damping system with model-specific guiding functions. We conducted a user study comparing the three classical models across six scenarios with varying environmental conditions in a vertical farming task. Results show no universally superior model: spring-damper excels in cluttered environments, potential field in free spaces (but it shows risks near obstacles), and guiding tube offers a balanced compromise. We propose novel objective metrics to evaluate the interaction, and show that guiding force magnitude correlates with comfort and trust scores. These findings provide practical model selection guidelines through environmental characteristics and real-time evaluation metrics.

Robot teleoperation enables safe, non-contact task execution in hazardous environments where direct human access is difficult, and its application has expanded with recent VR technologies. Many VR teleoperation studies, however, have primarily served as data-collection tools for robot imitation learning, so they often do not explicitly address dynamic obstacles, workspace changes, or collision risks during operation. For real deployment aimed at operator safety, teleoperation must react to dynamic situations with low latency and remain robust to mistakes made by inexperienced operators. This paper presents a VR teleoperation framework that supports real-time manipulation while handling collisions with both static and moving obstacles. The framework integrates GPU-accelerated inverse kinematics and trajectory optimization within a VR interface to generate feasible joint commands at each control cycle under robot constraints. Experiments with a 7-DoF manipulator demonstrate stable online behavior and collision-aware motion generation across three scenarios: obstacle-free, static-obstacle, and moving-obstacle environments. The results indicate that the proposed approach generates motion consistent with the operator's command while producing safe detours when obstacles interfere with the commanded path.

Optical tweezers (OT) provide piconewton-scale manipulation for delicate biomedical tasks, where visuo-haptic feedback can improve operator awareness by conveying interaction-force cues and trap-stability information. However, visuo-haptic teleoperation frameworks for complex-shaped optical microrobots remain underdeveloped, particularly in multi-trap manipulation scenarios. This paper presents a digital twin framework for virtual visuo-haptic teleoperation of complex-shaped OT-driven microrobots. The framework integrates a digital twin environment, image-based pose and depth estimation, microrobot motion simulation, and model-based haptic rendering within a Robot Operating System (ROS)-connected bimanual teleoperation system. For force modeling, we combine a Multi-Sphere Distributed Manipulation (MSDM) model with optical-force estimation from the Optical Tweezers Toolbox, enabling simulator-driven visuo-haptic feedback. The framework reproduces representative microrobot motion trends and provides haptic force rendering that is numerically consistent with the fitted optical-force model. In simulated cell-delivery tasks, haptic feedback reduced the standard deviations of the contact-force metric and the microrobot-to-trap-center distance metric by 53.2% and 55.2%, respectively, and improved task success from 30% to 80%. These results demonstrate the framework's effectiveness for evaluating visuo-haptic teleoperation strategies for complex-shaped optical microrobots.

Instructing robots from demonstrations can be done through different teaching modalities, each with different usability and performance trade-offs. This paper compares kinesthetic guidance, joystick teleoperation, and hand gestures in a user study with eight participants. We evaluate replay success, modified NASA-TLX workload, and common teaching errors across three manipulation tasks. Kinesthetic guidance produced the shortest demonstrations, lowest workload, and highest success on the more orientation-sensitive and contact-rich tasks. Joystick teleoperation performed best on simple peg picking. Hand-gesture teaching, although less reliable overall, performed better than expected and in some cases achieved results comparable to kinesthetic guidance.

Learning from demonstrations is effective for robotic manipulation, but collecting sufficient task-specific data remains a major bottleneck. Under distribution shift, small errors compound, performance degrades, and expert time is often spent on redundant, low-value corrections instead of the few critical failure cases. We present VR-DAgger, a human-in-the-loop framework centered on an immersive VR application for dexterous teleoperation, demonstration collection, and selective policy correction. The VR client provides intuitive hand control with synchronized scene visualization, while a backend workstation runs simulation and learning, enabling autonomous rollouts without continuous operator oversight. We use Monte Carlo (MC) dropout to score uncertainty during Isaac Lab rollouts of a diffusion policy and select informative failure segments for correction. These segments are replayed in VR as clips, where the operator selectively labels and corrects the policy's behavior, concentrating supervision where uncertainty is highest without full-rollout monitoring or a separate intervention classifier. We evaluate on three dexterous manipulation tasks (Pan pick-and-place, Drawer opening, Valve turning) with a 10-DoF XHand under standard and challenging initial configurations. Active labeling consistently improves over behavioral cloning across all tasks, with gains of up to 23 percentage points. Compared to unguided human-in-the-loop inspection, VR-DAgger reduces per-sample collection time by approximately 40% by focusing review on selected segments rather than full rollouts.

Industrial automation is at a pivotal moment, as Physical AI is driving a transition from rigid, hand-engineered automation systems toward more flexible and adaptive systems. This shift has created a growing demand for large-scale, real-world robot demonstration data, making teleoperation an increasingly important mechanism for data collection. However, high-quality teleoperated demonstrations remain difficult to obtain in practice, as novice operators often produce episodes that are task-successful but suboptimal for downstream use due to inefficient motion, repeated corrections, or operation near robot joint limits. We present a Data Quality Assessment and Feedback (DQAF) framework that closes the loop in teleoperation by providing immediate post-episode feedback grounded in semantic task progress and robot telemetry. The framework extracts quality relevant signals such as sub-task progress, motion smoothness, stalls, kinematic limits and converts them into structured quality assessments and actionable natural-language feedback. Unlike binary success or failure feedback, the proposed system explains why an episode is suboptimal and highlights specific behaviors to correct in the next trial. We evaluate the framework through a diagnostic validation study and a pilot user study. In the validation study, the system is compared with a human reviewer during dataset curation, producing rejection reasons and actionable feedback for improvement. In the pilot study with three novice operators across two manipulation tasks, the operator who received the systems immediate, automated post-episode feedback improved faster than those who did not, producing higher-quality demonstrations sooner.

Embodied agents, which couple intelligent decision-making with physical actuation in the real world, impose far more stringent and heterogeneous communication requirements than purely software-based agents. While 6G promises sub-millisecond latency, ultra-high reliability, native intelligence, and integrated sensing, systematic studies on how to exploit these capabilities for embodied agent communication remain limited. This article investigates 6G-enabled communication systems for embodied agents from both conceptual and engineering perspectives. First, we review the concept, embodiment value of embodied agents, and clarify their distinctions from disembodied agents. Then, we analyse the symbiotic relationship between embodied agents and 6G networks. We highlight how key 6G enablers can support the stringent requirements of human-robot interaction. Furthermore, we demonstrate the proactive role of embodied agents in bolstering communication networks through coverage extension, environmental sensing, and physical world understanding. Building on these insights, we propose a hierarchical communication architecture for human-robot remote interaction, comprising a human-intent perception layer, an open radio access network (O-RAN)-based transport layer, an intelligent intermediary layer, and an embodiment layer. To validate its feasibility, we implement an end-to-end prototype that integrates a haptic device, an industrial robotic arm, an intermediary platform, and a 5G O-RAN testbed. Experimental results demonstrate millisecond-level latency and stable closed-loop operation, confirming the practicality of the proposed architecture and providing a reference for future 6G-embodied agent research and industrial deployments.

Remote robotic-assisted endovascular intervention offers a promising approach to reduce clinician radiation exposure and physical strain, while extending specialized vascular care to geographically distant regions. Despite advancements, teleoperated endovascular intervention remains underexplored, especially for time-sensitive interventions like mechanical thrombectomy for acute stroke. The aim of the current review was to determine the evidence regarding teleoperated endovascular robotic systems, covering technical feasibility, communication infrastructure, and clinical outcomes. The review further identified research gaps and future directions. Following PRISMA guidelines, 16 studies were included that met the inclusion criteria out of 2501 initial search results. We found that teleoperated catheters and guidewires, driven by mechanical or electromagnetic systems, can be navigated across distances up to 7000 km. With robust communication infrastructure, network latency remained within clinically acceptable limits (30-163 ms). Although initial outcomes highlighted 100% procedural success in small-scale human trials, most evidence stemmed from animal or phantom models. Overall, the findings suggest that teleoperated endovascular intervention can reduce occupational hazards, expand patient access to urgent procedures, and optimize resource allocation. Future research should be conducted in low and middle income countries to demonstrate broader geographical access. Ultimately, multi-center clinical trials are required to validate the safety, efficacy, and generalization in diverse clinical settings.

While autonomous multi-robots can achieve safe and coordinated navigation, they often struggle to adapt to unforeseen conditions and to capture operator-driven objectives in unstructured environments. We present a Virtual Reality (VR)-based shared control framework for teams of drones operating in constrained and unknown environments, enabling real-time, user-guided exploration. At the core of our approach is a novel, user-guided motion-primitive-based planner that computes continuous, collision-free trajectories while continuously integrating operator input. This planner is coupled with an admittance controller, allowing the operator to flexibly influence team behavior and guide drones toward regions of interest that autonomous planners may overlook. The system supports mixed-reality operations with both physical and simulated drones, and implements a bilateral VR-based interface, allowing the operator to guide the robot team via migration points while receiving immediate visual feedback of the team state. Experimental results show that shared control improves obstacle avoidance, maintains inter-agent spacing, and reduces operator effort, demonstrating the feasibility and advantages of immersive, human-in-the-loop multi-robot navigation.

Autonomous manipulation systems have achieved remarkable capabilities, yet the integration of human expertise with diffusion-based policies in shared control remains relatively unexplored. In this paper, we propose Human-In-The-Loop Diffusion (HITL-D), a shared control framework that enhances user performance in multi-step, insertion, and fine manipulation tasks. HITL-D leverages a novel combination of diffusion-based policies and human control to provide autonomous end effector orientation updates conditioned on a scene point cloud and the Cartesian position of the end effector. This approach reduces the number of joystick control axes required, thereby lowering mental workload. In a multi-task user study with 12 participants, HITL-D reduced average task completion times by 40%, decreased perceived workload by 37%, and improved Likert-scale ratings for independence, intuitiveness, and confidence compared to traditional teleoperation methods. These results demonstrate that HITL-D effectively integrates human expertise with autonomous assistance, improving both objective and subjective aspects of teleoperation.

Missing significant amounts of school during K-12 education is known to put students' cognitive and social development at risk. Alternatives such as home instruction and online learning are common, but lack sufficient interaction with peers and teachers in the classroom. Mobile remote presence systems, or telepresence robots, are promising for homebound students because they provide embodiment and mobility in addition to the real-time participation offered by video conferencing technologies. Research is needed, however, for telepresence robots to meet the complex needs of homebound students participating remotely in the K-12 classroom context. We present findings from four multi-week deployments with homebound K-12 students attending classes via telepresence robots. The homebound students' experiences were documented in a total of 15 interviews and analyzed qualitatively as case studies. The homebound student participants and their deployment contexts differed from one another along multiple dimensions, and while some benefits of mobile remote attendance were enjoyed by all participants, each participant also experienced unique benefits. Some challenges with hearing, seeing, and moving the robot around the classroom warranted improvements to the design of the telepresence system. Other challenges suggested priorities for managing a classroom deployment, such as ensuring that the remote student is included in classroom activities, accountable to the teacher, and treated with respect by classmates. Based on insights from the study, we make recommendations for real-world deployment procedures in similar contexts.

Wireless extended reality (XR) teleoperation provides embodied interaction capability for collecting humanoid robot demonstrations, but the large-scale adoption is restricted by the overhead of high-frequency motion transmission. This paper develops a system framework that integrates sampling, transmission, interpolation, and reconstruction and formulates a communication-rate optimization that aims to minimize the communication energy while maintaining the reconstruction accuracy of robot motion trajectories through dimension-wise sampling-rate control. Since acquiring real-time feedback from physical robots is limited by hardware costs, it is necessary to solve the problem through simulator interaction with offline real-domain data correction. To guide sim-to-real adaptation, we provide a PAC-Bayes generalization characterization that reveals the effects of latent density-ratio estimation, finite-sample deviation, and encoder bias. Building on this analysis, we propose a proximal policy optimization (PPO) method with density-ratio weighting and trust-region regularization. Experiments on public humanoid teleoperation dataset show that the proposed method improves the tradeoff between reconstruction error and communication energy consumption under sim-to-real distribution shift. We further analyze the effectiveness of the proposed algorithm across various wireless channels and dynamic motion trajectories.

Existing bilateral teleoperation platforms still rely on costly rigid six-axis force/torque sensors, tightly coupled leader-follower hardware, and kilohertz control loops. We present a Cartesian bilateral framework built on the hardware-agnostic WinGs Operating Studio (WOS) middleware, in which a low-cost compliant 6-DOF pose-and-force sensing end-effector, Delta6, is mounted on both sides so that each manipulator behaves as an end-effector 6-DOF series elastic actuator (SEA). The leader runs a damping-only admittance loop with a 6-D biquad notch filter; the follower realizes a stiffness-damping impedance through a position-based outer loop with a PID wrench-to-pose mapping. Three time scales (hardware I/O, mid-rate impedance/admittance, low-rate teleoperation messages) are explicitly decoupled, enabling the same application to drive heterogeneous arms. On a Lite6/FR3 testbed at 150 Hz, the system tracks stably under delays up to $120\pm40$ ms and 1% packet loss, matches the prescribed virtual stiffness in contact, and shows a favorable cumulative energy signature in passivity-style tests.

The scarcity of large-scale, high-quality demonstration data remains a bottleneck in scaling imitation learning for robotic manipulation. We present COBALT, a teleoperation platform designed to democratize robot learning at scale both in simulation and in the real world. By leveraging vectorized environments, our scalable, load-balanced infrastructure supports concurrent teleoperation by multiple users on a single GPU, yielding a significant reduction in teleoperation cost. Operators can connect from nearly anywhere on Earth using commonly available devices, including single or dual smartphones, VR headsets, 3D mice, and keyboards. An inmemory data cache and efficient video streaming keep control and rendering synchronous, sustaining dozens of concurrent users at 20 Hz with sub-100 ms end-to-end latency for up to 8 concurrent users per GPU. We also demonstrate stable operation supporting 256 simulated clients across 8 GPUs, underscoring the system's ability to scale across hardware and within individual servers. We perform a comprehensive user study showing that phone-based teleoperation performs comparably to or better than specialized hardware, enabling faster, more ergonomic data collection. To ensure data quality, COBALT logs a suite of real-time metrics to automatically filter suboptimal demonstrations. We further demonstrate that a structured user training curriculum significantly improves data collection quality. Guided by insights from our user study, we crowdsource the collection of a large-scale, high-quality pilot dataset with 7500+ demonstrations (50+ hours) collected with smartphones across nine countries over five days. We validate the dataset's quality by training state-of-the-art imitation learning algorithms. Please visit https://cobalt-teleop.github.io/ for more details.

Teleoperation promises to extend the operational envelope of automated vehicles, yet it critically depends on network latency and video quality. We report a fixed-base driving-simulator study (N=25) with a 2x2 manipulation of added latency (100/300 ms) and bitrate (500/2000 kbit/s), plus a best-case baseline (0 ms added, 9000 kbit/s). We measured effective glass-to-glass (G2G) latency per condition (baseline approx. 413 ms; effective totals approx. 500-700 ms) and verified stable framerate and encoder settings. Multimodal measures covered performance (speed, steering reversals, crashes), oculomotor behavior (blink rate, fixation duration), physiology (RR interval, heart rate, skin conductance), and subjective workload. Latency and bitrate each increased operator load and modestly affected performance. Physiological measures (heart rate, RR interval) exhibited sub-additive interactions, whereas performance and oculomotor interactions were small or non-significant. Equivalence tests showed that 300 ms with 2000 kbit/s was velocity-equivalent to best-case (SESOI +/- 2 km/h), while 300 ms with 500 kbit/s was not. We argue that latency and video quality should be treated as largely independent design levers, and that physiology-aware adaptation can anticipate overload before safety is compromised.