Robotics

This paper presents a corpus-level analysis of generated behavior diagrams derived from Sony's R-CODE sample distribution for the ERS-111 AIBO. Rather than reading each script in isolation, the study compares named states across the corpus to identify the recurring control vocabulary that structures the sample set. The resulting aggregate shows that many superficially different routines are built from a compact embodied grammar centered on initialization, sensing, iterative action, synchronization, and recovery. In addition to historical analysis, the paper argues that this form of state-based abstraction is useful as an intermediate representation for constructing new encapsulated behavior routines, especially on constrained native robotic systems where deterministic control, direct hardware access, and modular behavioral composition remain important.

Automatic speech recognition (ASR) has become a critical component of modern robotic systems because it is one of the most natural and intuitive ways for humans to interact with robots. A commonly used method is to directly use API services online. But is that all we can do? This article provides an overview of how ASR technologies are integrated into various intelligent robots and machines. We discuss the evolution of speech recognition from established approaches to state-of-the-art deep learning models, such as OpenAI's Whisper. We also list large-scale datasets and open source toolkits that have been widely used in both industry and academia. We structure the survey around ASR model families, deployment strategies in robotics (especially ROS-based, cloud-based, and hybrid solutions), and several real-world robotic platforms. Finally, we outline the challenges of deploying robust speech recognition in robots and discuss future directions, including multimodal interaction in diverse and dynamic environments. This paper can help social robotics researchers better navigate the emerging domain of language-based natural human-robot interaction.

Indoor robotics research increasingly relies on micro-UAVs whose airframe, electronics, and control software are fully open to modification. Off-the-shelf platforms rarely expose the low-level access required for such modifications, while building a custom alternative typically requires substantial engineering effort before flight testing can begin, leaving many laboratories to work within constraints that limit the scope of their research. We present MIRA (Modular Indoor Research Architecture), a low-cost, open-source micro-UAV for indoor research built around a replicable 3D-printed PLA airframe and a containerized low-level software package managing the companion-to-autopilot communication bridge via Micro XRCE-DDS. Designed as a white-box architecture, core subsystems are individually replaceable without firmware refactoring, supporting local fabrication and component substitution from existing lab inventory. We characterize MIRA through manual flight in position-control mode within an optical motion-capture volume, where the communication pipeline sustains a median companion-to-autopilot latency of 0.02 ms and power spectral density analysis confirms the structural vibration energy stays concentrated in a narrow 90 to 110 Hz band, isolated from the sub-20 Hz control bandwidth and within the autopilot safety thresholds.

Differentiable simulators have advanced policy learning and model-based control, yet actuator dynamics remain an important source of sim-to-real error. This is particularly acute on low-cost platforms, where the linear current-to-torque relation $τ= K_tI$ becomes unreliable during commanded-target tracking because of friction, hysteresis, backlash, and thermal effects. We present NeuralActuator, a neural actuator model that jointly predicts (i) a simulator-equivalent generalized-effort surrogate for trajectory propagation on low-cost servo platforms, (ii) external force with a contact-probability gate for sensorless force perception, and (iii) a motor-condition score for the supervised joint. We also introduce the Neural Actuation Dataset (NAD), collected with a twin-arm teleoperation system that records robot states and actuator telemetry together with external-force labels. The torque-surrogate head is trained through differentiable simulation from pose trajectories without direct generalized-effort labels, while the force, gate, and motor-condition heads receive direct supervision. A Transformer captures temporal dependencies while supporting real-time inference. We evaluate NeuralActuator on a 5-DoF OpenManipulator-X, a 6-DoF SO-101, and a 7-DoF Franka Emika Panda, spanning three actuator families and platforms costing approximately USD 500 to over USD 30,000. The low-cost platforms support dynamics and force evaluation, while the offline Franka experiment provides an additional payload-force-estimation benchmark. Experiments further demonstrate its application for motor condition estimation on OpenManipulator-X and improved behavior-cloning performance when NeuralActuator is used as a pretrained module.

Animatronic faces are a central component of socially interactive robots, enabling rich nonverbal communication through facial articulation. However, state-of-the-art animatronic faces are typically tailored systems: each new facial geometry requires extensive manual mechanical redesign, making large-scale personalization prohibitively slow and costly. In this work, we pursue automated and scalable mechanical face synthesis, aiming to rapidly generate a physically realizable facial mechanism for a wide range of facial geometries. We introduce a parametric, linkage-driven mechanical face template whose topology and actuator layout are explicitly parameterized to support systematic scaling and retargeting across diverse facial morphologies. Building on this template, we propose a hierarchical automatic design algorithm that takes a single 2D portrait as input, reconstructs a target 3D face, and synthesizes a collision-free, manufacturable internal mechanism. The algorithm combines anatomy-guided feasible motion volumes, Action Unit (AU)-derived trajectory-based expressiveness objectives, and a collision-driven outer-loop refinement strategy. Beyond hardware synthesis, we argue that future mechanical faces deployed at scale must engage in bidirectional, multi-turn conversation rather than functioning solely as speaking or listening heads. To this end, we develop a dual-identity conversational facial motion synthesis framework that jointly models speaking and listening behaviors from audio, producing temporally coherent 3D facial motion suitable for physical execution. We validate our system through extensive experiments, including (i) quantitative evaluation of automatic mechanism synthesis across diverse facial geometries, (ii) comparisons against manual mechanical design, (iii) benchmarks on conversational facial motion synthesis and real-time deployment, and (iv) perceptual user studies.

Existing robotic perception is constrained by sensors that are either robot-mounted or permanently fixed in the environment, locking perception to a limited set of viewpoints. Yet as robots perform increasingly diverse tasks, the most informative viewpoint shifts from one task to the next-often somewhere onboard sensor and static infrastructure can not readily satisfy. To address this gap, we propose SensorPerch, a novel realization of active perception that decouples sensing from both the robot embodiment and the environment by treating sensors as independent physical entities that the robot can autonomously detach and re-attach within the environment. SensorPerch presents one realization of this paradigm: a lightweight, wireless, reconfigurable sensor platform that can perch on diverse surfaces, paired with a viewpoint-selection framework that determines task-optimal sensor placements. Together, these enable robots to construct task-relevant viewpoints on demand, independent of the robot's current position and available fixed infrastructure. We demonstrate the paradigm on two task classes: (i) object-coupled perception, where SensorPerch enables persistent object-state detection beyond the robot's current position, achieving successful event detection even when the robot is not nearby; and (ii) policy-coupled perception, where SensorPerch allows robots to construct diverse, policy-specific viewpoints for various policies, achieving success rates comparable to those obtained using oracle viewpoints.

Recent VLM and VLA systems have improved robotic perception and action prediction, yet long-horizon embodied agents still require a general runtime layer for reasoning, memory, tool use, verification, and cross-embodiment execution. We present ABot-AgentOS, a general robotic Agent Operating System that sits above low-level controllers and provides a deliberative agent layer for scene-conditioned planning, context-isolated skill execution, multi-stage verification, multi-modal memory, and edge-cloud collaboration. To evaluate such systems, we introduce EmbodiedWorldBench, an executable benchmark with 16 indoor, outdoor, and hybrid scenes, four difficulty levels, and over 200 tasks involving navigation, object search, NPC dialogue, dynamic events, and trace-grounded scoring. ABot-AgentOS further introduces Universal Multi-modal Graph Memory, a persistent source-grounded substrate that converts dialogue, visual observations, spatial context, temporal relations, and task traces into typed nodes and edges. A failure-driven self-evolution loop converts diagnosed memory failures into gated runtime evo-assets that are promoted only to later evaluation splits, preventing current-split ground-truth leakage while enabling continual improvement. On an initial EmbodiedWorldBench subset, ABot-AgentOS improves over a single-controller baseline in both task success and goal completion. Across memory benchmarks, ABot-AgentOS Static achieves 87.5 on LoCoMo, 59.9 on OpenEQA EM-EQA, 88.6 on Mem-Gallery, and 76.5 Acc@All on NExT-QA; self-evolution further improves LoCoMo to 88.7, OpenEQA to 60.4, and Mem-Gallery to 89.0. These results suggest that a general Agent OS layer can improve long-horizon embodied execution while providing persistent, auditable memory for continual interaction.

Automation in industries such as retail, warehousing and logistics presents opportunities for greater throughput, cost reduction and mitigation of disruptions from labour shortages. Previously, such efforts have focused on back-room operations involving packing and sorting in relatively structured environments. With advances in robotic mobile manipulation hardware and foundation models, automation can now be applied to more variable and human-centric environments such as retail store shelves. In this work, we present a task-planning approach using Large Language Models (LLMs) and Vision-Language Models (VLMs) to address the restocking problem in retail scenarios such as supermarkets. We demonstrate this system on a custom omnidirectional mobile manipulation platform, with user-driven prompts and a feedback-based iterative re-planning approach for error correction. The end-to-end system is validated in a PyBullet simulation environment for pick-and-place tasks.

iG-LIO is a tightly-coupled LiDAR-inertial odometry system fusing generalized-ICP and point-to-plane constraints in an iterated error-state Kalman filter over an incremental voxel map. We report an open-source ROS 2 Jazzy port of the original ROS 1 implementation and, more importantly, the diagnosis of environment-induced numerical failures that appear only after the port: a mechanically faithful migration -- estimation mathematics left unchanged -- compiled and ran, yet diverged with NaN internal values. Both causes trace to the modern ROS 2 toolchain, not the algorithm: a Quality-of-Service (QoS) mismatch that silently drops and reorders IMU samples, and an uninitialized parallel-reduce accumulator arising from the oneTBB + Eigen combination shipped with current distributions. We further correct Ouster point-field parsing to ensure correct point cloud undistortion with newer Ouster revisions, add Velodyne Velarray M1600 support, provide both a compile-time-gated Livox CustomMsg path and a driver-free path for Livox sensors publishing standard PointCloud2 (e.g. Mid-360), and expose the runtime via YAML. The result has been validated in an Ouster OS0 Rev7, an Ouster OS1 Rev 7, and a Livox MID-360. This report is a citable reference for the port itself, not a claim on the underlying algorithm [1]. The ROS 2 port of iG-LIO described in this document can be found at https://github.com/Forestry-Robotics-UC/ig_lio/tree/ros2-jazzy.

Aerial manipulation with multirotor platforms enables physical interaction in complex environments, but rotor-induced airflow remains a critical limitation for tasks involving airflow-sensitive targets or surroundings. This paper presents an optimization-based design framework for modular aerial manipulators that jointly considers task wrench feasibility, end-effector placement, and airflow exposure constraints. We first introduce a novel categorization of target-side airflow tolerance and formulate the corresponding exposure requirements as geometric constraints. To efficiently model rotor-induced airflow, we introduce a compact cone-sphere envelope that approximates the spreading structure of a quadrotor's airflow while preserving computational tractability for optimization. Building on this formulation, we propose a reconfiguration optimization that adapts a modular aerial manipulator to diverse task wrench requirements while enforcing both target-side airflow exposure and intra-platform airflow interference constraints. Unlike prior designs that assume a fixed end-effector location, the proposed framework optimizes the end-effector placement together with the platform configuration. Scalability experiments and ablation studies validate the effectiveness of the proposed framework.

Steering Cable-Driven Parallel Robots (CDPRs) beyond their Wrench-Feasible Workspace (WFW) augments their capabilities in challenging scenarios such as during aggressive maneuvers or following a cable failure. In this context, although the determination of cable tensions is a well-studied topic, only a few approaches address these scenarios. Therefore, this paper introduces an extended version of the Analytic Center method as a criterion for selecting cable tensions outside the WFW while maintaining differentiability and including non-linear constraints. Notably, the proposed method maintains continuous and differentiable tension profiles, ensures fast real-time convergence to a unique solution, and, in contrast to other slack-based formulations, relegates wrench errors to a negligible area of the WFW. Its superiority in terms of smoothness and wrench error is confirmed via Pareto dominance with respect to the leading state-of-the-art method. Lastly, the effectiveness of the method is demonstrated through numerical experiments.

The elephant trunk is a dexterous and versatile manipulator whose performance is still unmatched in robotics. In previous works, modularity was prioritized and relatively small-scale continuum robots were built. We take the natural proboscis of the Loxodonta africana species as a model and propose a different design approach which favors structural continuity and dynamic properties that plausibly emulate those of the natural trunk, while conferring high adaptability to the environment and humans. Instead of targeting prescribed behaviors, we show that a biomimetic design based on the macroscopic properties of the natural system enables elephant-like movements and grasping. We build by 3D printing an 85 cm long, compliant, tapered, volumetrically tessellated continuum arm, which is combined with tendon-driven actuation mimicking the longitudinal and oblique muscles of the natural model. We demonstrate whole-body grasping of objects having different shapes and dimensions and discuss a comparison to the biological trunk highlighting aspects of both biology and robotics.

Vision Language Models (VLMs) and Vision Language Action (VLA) models have shown promise in robotic control. Yet, they face significant challenges regarding explainability, generalization, and compute requirements. This paper presents a Multi-Agent System (MAS) architecture that addresses these limitations by deploying specialized agents on onboard hardware - eliminating dependence on external compute. The system controls a multi-purpose autonomous mobile manipulator in a simulated industrial warehouse, fulfilling five task categories: safety inspection, warehouse maintenance, warehouse search, package quality verification, and responding to human requests. Compact VLMs (3-20B parameters) are used throughout, with fine-tuning applied to improve package inspection accuracy. A novel "Megamind" orchestration agent mitigates context retention issues inherent to long-horizon planning with smaller models. The system was validated in a hardware-in-the-loop simulation using an AMD Ryzen(TM) AI mini PC. Results demonstrate that a fully onboard MAS architecture is a viable, cost-efficient alternative to cloud-dependent deployments, with strong potential for real-world transfer. The simulation environment has been released as open source under the Apache 2.0 licence.

Nonverbal communication through head and neck movement is fundamental to human social signalling, yet how robotic neck morphology translates motion into communicative information remains poorly understood. We present an information-theoretic framework characterising robot neck movement as a communication channel, quantifying information transmitted and energy expended across varied configurations. Using a robotic neck platform, we recorded 84 video stimuli spanning three rotational degrees of freedom (DoF), varying amplitude, acceleration, and frequency, measuring Shannon entropy of pixel-change signals alongside energy consumption. A perceptual study validated communicative interpretations of each motion. While humans typically engage one axis per gesture, robots are unconstrained by biological architecture, motivating tests up to 3 DoF. Yet communicative information peaks at two DoF and decreases at three despite rising energy cost, a phenomenon we term the morphological information bottleneck. Motion parameter effects were parameter-dependent, some additive, others non-linear. We introduce the Motor Information Space, a framework mapping entropy against energy to expose communicative efficiency across morphologies, in which the optimal configuration achieves 5.26 bits at competitive energy cost. Perception data further confirm multi-axis movements reduce clarity. These findings challenge the assumption that anatomical completeness improves robotic expressiveness, establishing a quantitative basis for morphological design in robots, especially humanoids.

Modular miniature robots could provide scalable function in constrained environments, but coordinating many imperfect modules remains difficult when computation, communication and reliability are limited. A central robotics challenge is to coordinate many actuator-sensor modules without assigning a privileged leader, prescribing a fixed gait template, or relying on dense communication. Here we introduce a programmable synchronization-graph framework for modular miniature robots in which each actuator-sensor pair is represented as a network node and locomotor coordination is encoded through graph coupling. Fixed intra-subgraph links synchronize heterogeneous actuator groups, whereas a small number of signed inter-subgraph links program phase relationships between groups. In physical robot collectives with up to nine modules, graph coupling drives the emergence of synchronization, signed links tune the phase difference from in-phase to out-of-phase motion, and floor experiments produce gallop-like and trot-like contact patterns in a five-module robot assembly. Replacing dense all-to-all coupling with sparse d-regular topologies preserves synchronization while reducing the coupling burden. The same graph representation also captures fault tolerance: increasing graph degree increases the number of module deactivations tolerated before desynchronization. Finally, an upper-confidence-bound edge-selection algorithm learns inter-subgraph links that drive the system toward target phase states. In a separate deactivation benchmark, the graph-based controller avoids the leader-specific failure mode observed in centralized leader-follower control and reduces worst-case phase error by about threefold. These results establish programmable network topology as a compact control layer for gait phase programming, online adaptation and robustness to unit loss in modular miniature robots.

Robust dynamic object detection and tracking are essential for enabling robots to operate safely and effectively alongside humans in complex environments such as construction sites. While LiDAR-based SLAM and occupancy grid methods offer viable solutions for detecting and tracking motion, many state-of-the-art 3D vision approaches rely heavily on pre-trained neural networks and require additional post-processing to identify moving objects. Sensor fusion techniques, combining the precision of LiDAR with the semantic richness of RGB imagery, offer a promising alternative. In this work, we present a novel framework that enhances a quadruped robot equipped with a LiDAR sensor and an upward-facing fisheye camera for real-time dynamic object detection and tracking. After identifying moving objects within a registered point cloud, our method assigns semantic labels by projecting 3D coordinates onto a 2D cylindrical panorama, aligning with real-time image-based detections for observation update of the Kalman filter. The proposed system demonstrates high precision, simplicity, and robustness, particularly in handling objects transitioning between dynamic and static states, thus it is well-suited for deployment in real-world construction environments.

Physics-informed learning promises data-efficient and stable dynamics prediction, yet its strongest geometric guarantees have largely remained confined to closed conservative systems. This excludes robotic systems of interest, where actuation, dissipation, and constraints exchange energy and momentum with the environment. We introduce CaLiSym, a lightweight framework that extends symplectic learning to such systems by changing where the geometric prior is imposed. Rather than enforcing symplecticity on the measured state, CaLiSym embeds the state and its ports into a lifted phase space, where the dynamics evolve through a symplectic map. The lift is explicit and algebraic, requiring neither recurrent latent states, transformer decoders, implicit optimization, nor inference-time numerical integration. We instantiate the framework with SympNet predictors and introduce GRB-SympNet, a B-spline variant combining approximation with exact symplectic structure. Experiments on a controlled dissipative double pendulum, a real-world quadrotor, and a contact-constrained real-world quadruped demonstrate the lowest out-of-distribution autoregressive rollout error across systems, improving by up to 69.5% while using fewer parameters and up to 85x fewer floating-point operations per step than sequence-model baselines. The lifted dynamics preserve the symplectic form to numerical precision, extending symplectic learning beyond conservative mechanics toward real-world robotics.

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual Simultaneous Localization and Mapping (SLAM) and floor plan-referenced localization systems are required. In this paper we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across seven floors over an eight-month period of the construction project. Ground truth trajectories were collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor-plan-referenced localization, reflecting the broader maturity of SLAM methods. The higher errors in localization further highlight the difficulty of this task in construction and point to the need for continued research, which this dataset is intended to support. The dataset and the benchmark are publicly available at: https://hilti-trimble-challenge.com/dataset-2026.

Long-horizon household tasks require robots to compose many language-conditioned skills, yet the boundary between consecutive skills is rarely explicit. A skill may satisfy its own postcondition while leaving the robot, objects, or camera views in a state from which the next skill cannot reliably start. We study this semantic handoff problem in BEHAVIOR-1K through an agent-orchestrated vision-language-action execution harness. The harness invokes $π_{0.5}$-based skill checkpoints trained from cleaned BEHAVIOR-1K demonstrations, assigns each skill typed arguments and a step budget, and uses multi-view vision-language model verification to decide whether execution should advance, retry, or replan. To separate isolated skill competence from long-horizon compositional robustness, we evaluate the same checkpoints under two initial-state distributions: clean skill-boundary snapshots and chained terminal states produced by previous skills. Selected navigation, grasping, placement, and door-opening skills achieve 77--100% success from clean snapshots under human-reviewed verification, yet composed rollouts still frequently stall from chained states. The resulting traces attribute failures to next-skill readiness, target grounding, and control execution, turning nearzero task success into actionable diagnostics for what VLA skill libraries must learn next: robustness to the messy chained-state distribution that clean demonstrations underrepresent.

Validation of robotic systems critically depends on the operating conditions under which they are assessed. Scenario selection and variation are often manual, experience-driven, and difficult to scale, which harms reproducibility and weakens validation conclusions. We propose a scenario-based methodology that models scenarios compositionally and formalizes how these dimensions are varied, instantiated, executed, and interpreted. Building on this, we introduce RoboVAST, a framework that realizes declarative campaign specifications, plugin-based scenario generation, and scalable containerized execution with integrated result analysis. We demonstrate the approach with a navigation dataset comprising 5480 scenario configurations and over 100000 execution runs across five indoor maps with varied paths, sensor noise, software parameters, and obstacle settings, totaling more than 1800 hours of simulated operation and 1873 km traveled. Twenty repetitions per configuration allow us to distinguish systematic failures from stochastic anomalies.

Reliable seam segmentation is essential for autonomous robotic welding in construction, where harsh illumination, specular reflections, and thin weld geometries often degrade segmentation performance. This study proposes a reflection-robust seam segmentation framework that enhances a BiSeNetV2 backbone through transfer learning and a hybrid Cross-Entropy--Lovász loss. Rather than increasing architectural complexity, the proposed framework improves reflection robustness through learning-stability-oriented optimization. Experimental results show that the proposed method achieves 81.76% Joint IoU and 90.73% mIoU, improving Joint IoU by +22.36 percentage points over the OHEM-based baseline while maintaining identical FLOPs, parameter count, and inference speed. The proposed approach also recovers 96.33% of severe zero-IoU failure cases under reflective conditions. Comparative experiments across BiSeNetV2, DeepLabV3+, UNet, and SegFormer further demonstrate that the proposed optimization strategy is particularly effective for lightweight real-time segmentation architectures. Qualitative analyses additionally show improved seam continuity and reflection robustness in challenging welding environments. These findings suggest that the proposed framework provides a practical and lightweight perception solution for robotic welding applications involving reflective metallic surfaces.

This study proposes a neural network-based transfer learning framework for modeling the dynamics of soft, fin-actuated underwater robots. We focus on morphologically similar robots that differ in scale and hydrodynamic properties. A model trained on data from a larger robot (source domain) is adapted to a smaller one (target domain) with limited labeled data. To enable label-efficient transfer, we develop an autoencoder-based domain adaptation approach that learns a shared latent representation aligning the dynamics of both robots. Experiments on two real underwater robots show that the proposed method enables accurate state estimation of the body-frame velocities on a target platform without labeled data, highlighting its potential for efficient cross-robot dynamics transfer among morphologically similar platforms.

In this work, we focus on the scenario of a robot-assisted emergency evacuation. We consider two capabilities relevant to such a setting. The first is opening doors ahead of the people being evacuated, so that their path toward an exit stays clear. The second is retrieving rescue equipment and delivering it to the emergency responders carrying out the evacuation. From a systems perspective, this involves several tasks at once. The robot must locate ADA-compliant door buttons and the rescue equipment it needs to retrieve. Additionally, it must remain aware of the people around it and adapt its behavior to them, so that it supports the evacuation rather than getting in the way. We address these demands with a behavior tree at the core of our framework. This structure is chosen for its ability to select high-level tasks based on environmental triggers, and to extend to new situations as they arise. We evaluate the system in 105 trials on the Toyota Human Support Robot, across five hardware and three simulation scenarios. These trials capture the decisions the robot must make in this setting: whether to press a door button, yield to a nearby person, walk through a door someone else is holding, or first retrieve rescue equipment before traversing the door. Overall, the system completes 97 of the 105 trials successfully. These results suggest our framework provides a practical basis for robotic assistance in broader emergency response tasks. Code and video demonstrations are available at https://github.com/AndrewSnowdy/hsr_mm_control.

Touch is a fundamental communication modality in human-robot interaction and may support grounding, emotional regulation, and stress reduction in therapeutic contexts. However, designing touch-based interactions for individuals with post-traumatic stress disorder (PTSD) requires careful consideration of trauma-informed care (TIC) principles, including safety, transparency, autonomy, and trigger avoidance. This paper investigates how touch actuation in social robots can be designed to align with trauma-informed care. We distinguish between direct touch, involving physical contact between a user and a robot, and indirect touch, mediated through artifacts such as wearables or smart textiles. Building on this distinction, we propose a design space comprising three dimensions: Actuation Modality, Objective of the Actuation, and Intended Effect of the Actuation. We analyze these dimensions through the lens of trauma-informed care and derive key design considerations for touch-based interventions. The resulting approach provides a conceptual foundation for developing trauma-sensitive social robots that support individuals with PTSD through touch-based interactions.

Indoor search-and-rescue (SAR) operations often require rapid situational awareness where GNSS signals are unavailable and human access is difficult or hazardous. While most autonomous aerial systems rely on LiDAR, stereo vision, or specialized depth cameras, such solutions increase both hardware complexity and deployment costs. This paper presents a complete autonomous indoor navigation framework for low-cost unmanned aerial vehicles based exclusively on monocular vision. Implemented on a DJI Tello platform, the system combines monocular depth estimation using Depth Anything V2 with classical computer vision and lightweight deep learning models for scene understanding, victim detection, and hazard recognition. The framework consists of two independent behaviors: (i) corridor exploration with automatic door detection, room entry, OCR-based room identification, and victim inspection; and (ii) autonomous stair ascent based on TRISTAR (TRI-Signal STair Ascent Recognition), a novel triple-sensor fusion method that integrates structural cues (Sobel filtering), texture analysis (multi-scale Gabor filtering), and geometric depth from monocular depth estimation. Evaluation used real indoor flights in a university building. Depth calibration reduced relative depth error from 27.4% to below 10%, while the door detection algorithm reached a precision of 0.93 and an F1-score of 0.91. A dedicated ablation study shows that multi-sensor fusion significantly improves stair-recognition robustness compared to individual sensing modalities, and a failure-case analysis delineates the limits of monocular perception under challenging lighting and reflective surfaces. The results demonstrate that reliable indoor exploration and stair traversal are achievable on resource-constrained platforms without specialized ranging hardware, a practical, cost-effective solution for rapid SAR deployment.

As urban waste volumes escalate and labor shortages intensify, automated waste sorting systems are becoming a necessity. However, current robotic solutions often struggle with the 3D perception and manipulation of transparent, deformable, or cluttered objects. This work introduces ROBOCYCLE, an autonomous dual-arm robotic recycling platform designed to meet the recycling standards of the Tokyo metropolitan area. Our approach integrates multi-view RGB-D perception, transformer-based instance segmentation using RF-DETR, and 6-DoF grasp planning via the Anygrasp SDK. By processing segmentated point clouds, the system generates robust candidate poses for irregular and deformable waste. The system achieved a 90.3% grasp success rate and 84.3% overall task success rate, effectively performing complex coordinated tasks such as unscrewing PET bottle caps. The proposed platform offers a scalable solution for autonomous waste management in real-world human environments.

When designing robots' nonverbal behaviors, many researchers have turned to arts-based insights, such as Disney's Animation Principles. Yet, while these principles bear key insights into the design of like-life characters, their application to robot design is inherently limited, in part because animation is not constrained by real-world physics, and in part because animation principles focus on low level animation mechanics and not high-level design considerations for physically embodied, interactive characters. In contrast, little attention has been paid to art forms like puppetry, despite their long history of exploring morphological, behavior, and interaction design of physically embodied, interactive characters. As such, in this work we leverage puppetry texts and practicing puppeteers' expert knowledge knowledge to derive a set of puppetry principles with key insights for robot design. As we show, these insights go beyond -- and uniquely complement -- the prior insights provided by theater, dance, and animation.

Simulation is essential for maritime robotics, supporting operator training, mission rehearsal, and human-vehicle interaction in environments where real-world testing is costly or hazardous. Existing simulators focus primarily on autonomy systems and often lack human-in-the-loop interaction and realistic environmental physics. This paper introduces LOTUSim, an open-source, real-time maritime simulator supporting multi-user interaction across aerial, surface, and underwater robotic systems for coordinated naval-style operations. The first contribution of this work is enabling real-time interactive performance for users while ensuring scalability to large fleets operating within a shared interactive simulation environment. Validation demonstrates robust human-in-the-loop performance, maintaining strict real-time execution and high visual fidelity while scaling to large heterogeneous maritime drone swarms. The second contribution is a computationally efficient, Ekman-inspired layered, underwater current model that captures wind-driven, depth-dependent flow dynamics with sufficient physical fidelity for large-scale simulations. Validation against ocean reanalysis data demonstrates substantially improved accuracy compared to commonly used stochastic Gauss-Markov current models. These results confirm LOTUSim's suitability as a simulation platform for operatorin-the-loop maritime robotics research.

We present EVA-Client, an open-source framework for deployment, data collection, and evaluation of trained manipulation policies on real robots. Sitting between a policy server and the physical hardware, EVA-Client unifies the real-robot stages of the policy iteration loop within a single codebase. It makes three contributions. First, a component-decoupled architecture in which robot backends, inference strategies, and transport middlewares form an orthogonal grid: adding a robot or a strategy touches only its own layer. Second, inspectable execution through Debug, Collect, and Eval workflows, with modes ranging from open-loop simulation to continuous real-time control. Third, every evaluation run doubles as a data collection, recording full rollouts in training-ready format alongside exhaustive logs and a side-by-side comparison viewer, so each evaluation feeds the next round of training rather than ending as an unrecorded impression. EVA-Client further consolidates major real-time inference strategies, synchronous and asynchronous execution, ACT-style temporal ensembling, Real-Time Chunking, and a naive-async ablation baseline, behind a single configuration surface.

Robotics foundation models (RFMs) are making general-purpose robots increasingly practical for factory deployments. While RFM serving systems are central to this vision, existing systems are largely shaped by a single-robot, single-model assumption: inference is treated as an edge-computing problem handled by an on-robot or dedicated nearby GPU, and the serving objective is to minimize the latency of a single action model. In this paper, we propose ROSA, an RFM serving system for robot factories designed around three key principles. First, ROSA adopts shared GPU-pool serving, allowing a fleet of robots to access powerful server-class GPUs over the network in order to improve inference performance, battery duration, and GPU utilization. Second, ROSA provides a robotics-aware programming abstraction and system design that supports multi-model pipelines, per-task performance requirements, and failure handling. Third, ROSA uses factory-objective-driven scheduling to maximize SLO-qualified factory productivity rather than minimizing individual request latency. We implement ROSA on top of Ray Serve for distributed orchestration, with vLLM, PyTorch, and JAX as model-serving backends, and evaluate it on both real robots and synthetic large-scale workloads. The results show that ROSA improves factory productivity by up to 12.06x over conventional dedicated serving systems.