Inspection

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3% mAP@50 and 37.9% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

Internal voids are ubiquitous defects in manufactured structures, yet their characterization remains challenging because their geometry is hidden and can only be inferred indirectly from accessible measurements. Here we introduce \textit{GenVoid}, a physics-informed generative model-based framework for identifying internal voids in complex two- and three-dimensional solids from surface displacement measurements alone. By incorporating the governing mechanics into a generative inference framework, \textit{GenVoid} enables void identification across linear elastic, hyperelastic and plastic material behaviours and accommodates complex two- and three-dimensional structural geometries. Importantly, the framework explicitly accounts for uncertainty and noise in displacement measurements, producing probabilistic reconstructions of internal void geometry rather than a single deterministic estimate. We demonstrate the approach using high-fidelity synthetic datasets and experimentally measured displacement fields obtained from in-situ mechanical experiments, establishing its ability to infer hidden voids from realistic displacement measurements. To quantify the fundamental limits of such inference, we further introduce an observability measure that characterizes the sensitivity of boundary measurements to localized stiffness perturbations within the interior under an ensemble of applied loads. This framework provides a direct connection between defect location, sensor configuration and reconstruction fidelity, enabling systematic assessment of how the number and spatial distribution of boundary measurements govern void-identification accuracy. To this end, these results establish a physics-informed and uncertainty-aware approach for non-invasive characterization of hidden defects and provide a quantitative basis for designing measurement strategies for inverse problems in solid mechanics.

Robots inspecting an assembly must determine which parts are present and whether they are correctly installed. During egocentric assembly assistance, head motion and workpiece handling reveal evidence for these checks, while spoken state confirmations link observations to procedural outcomes. We introduce INSPECT, which learns robot view preferences from records of a smart-glasses assistant that answers part queries and provides next-step guidance. Presence-Invariant TwinSwap (PI-TwinSwap) calibrates object evidence through paired identity interventions. Claim-indexed supervision separates evidence requirements from camera-reproducible observation changes. Object-centered calibration adapts relative view preferences to robot poses, while clause-level screening checks predicted evidence. The robot selects views using only its current observation and known poses, without candidate images. Evaluation uses annotated assistant-video replay to simulate state feedback, without target-domain view labels for policy training. On images of physical gearbox assemblies, INSPECT achieves the highest view utility among the compared non-oracle policies and raises human-rated full verifiability from 34.8% to 41.7% compared with keeping the current view. On commercial angle-grinder recordings in IMPACT, the transferred relative-view selector increases the correct decision rate from 50.6% to 54.3% with a frozen perception head. The source code is available at https://github.com/Kratos-Wen/INSPECT.

Unmanned aerial vehicle facade inspection can combine red, green, and blue (RGB) imagery with thermal measurements to screen surface and subsurface anomalies. However, geometric discrepancies between the sensors and thermal image rendering can obscure spatial correspondence and weak temperature contrasts. This article presents a sensor-level pipeline comprising per-sensor correction, RGB-to-thermal registration, common-support cropping, and signed local contrast encoding of 16-bit radiometric measurements. The encoding preserves the distinction between locally hotter and colder regions and supplies the fourth input channel of a compact single-stream detector. We introduce M3T, a dataset of 674 paired RGB and radiometric thermal samples from five facade-inspection projects covering eight component and anomaly categories. The median residual registration error is 3.384 pixels, and a controlled-displacement analysis characterizes how the local contrast response changes under controlled displacement. Project-grouped four-fold evaluation yields mean average precision of 0.168 over intersection-over-union thresholds from 0.5 to 0.95, using 28.50 billion floating-point operations per image. A separate single-split ablation shows improved delamination detection over RGB-only and alternative thermal inputs, although aggregate accuracy does not improve over RGB alone. Evaluation on RGBT-Tiny shows mixed performance with rendered thermal imagery. These results characterize the category-specific benefits and limitations of aligned radiometric contrast for compact facade screening.

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

AI coding assistants are becoming co-authors of production software, yet their evaluation centers on functional correctness, leaving open whether their code differs from human code in the quality dimensions dominating lifecycle cost. We compare human-written and AI-generated code at scale: 787,562 function pairs across Python, Java, and C, each human function mined from open-source repositories paired with implementations generated from its docstring by three AI assistants (OpenAI GPT models, DeepSeek-Coder, Qwen2.5-Coder). We characterize structural complexity and statistical naturalness, and map static-analysis findings onto Orthogonal Defect Classification for defects and the Common Weakness Enumeration for vulnerabilities, making authors and languages directly comparable. AI-generated code is structurally compressed and stylistically templated: roughly half the size and branching of human code, clustering apart at the style level. Defect profiles differ in kind: human code concentrates issues of mature codebases, AI code repetitive boilerplate; security is language-dependent, with LLMs producing more, and more severe, findings in Python and Java but fewer high-severity memory-safety findings than humans in C. Once size is controlled for, complexity metrics carry little signal, while naturalness separates authors. Finally, we release CQBench, a benchmark of 27,346 issue-prone tasks with baselines and an evaluation pipeline for quality assurance and security testing.

Automated classification of sewer defects is essential for infrastructure condition assessment and maintenance decision-making, but existing deep learning methods struggle to balance classification accuracy and computational complexity in large-scale multi-label scenarios. This study develops Sewer-Transformer-ML, a hierarchical vision Transformer with multi-level feature fusion, together with two lightweight architectures, Sewer-MobileNet-ML and Sewer-Mobile-TransNet, for resource-constrained inspection scenarios. On the Sewer-ML test set, Sewer-Transformer-ML-Base achieved an $F2_{\text{CIW}}$ of 65.68% and an $F1_{\text{Normal}}$ of 92.68%, ranking first on the public leaderboard and exceeding the second-ranked method by 7.6 percentage points in $F2_{\text{CIW}}$. Sewer-MobileNet-ML achieved an $F2_{\text{CIW}}$ of 65.73% with only 17 M parameters, representing an approximately 95% parameter reduction relative to the base model. Under the standard Sewer-Capsule data split, Sewer-Mobile-TransNet achieved 96.43% classification accuracy. When the training set was reduced to 1,177 images, pretraining on Sewer-ML consistently improved model performance. Ablation experiments further showed that direct concatenation was more effective for Transformer features, whereas attention-based fusion better supported multiscale CNN features. These findings provide a computational basis for automated sewer inspection, lightweight model design, and adaptation across civil infrastructure inspection platforms.

Autonomous property inspection requires more than robust robot navigation: a deployable system must connect heterogeneous sensing, reusable autonomy capabilities, multimodal scene understanding, human interaction, and enterprise response within a traceable operational loop. Existing quadruped inspection systems commonly integrate these functions through task-specific interfaces, making contextual coordination, knowledge reuse, and controlled adaptation difficult. This paper presents \textit{Harness Robotic OS} (HROS), a unified embodied-agent runtime, and Argos, its realization for residential-community inspection. HROS organizes the system into robot runtime, embodied autonomy skills, cognitive agent runtime, and interaction and operations planes. A shared context connects physical state with agent reasoning; streaming ASR/TTS supports voice-based mission interaction; hierarchical working, episodic, and semantic memory preserves operational knowledge; and a safety-gated self-evolution loop converts execution traces into versioned candidate updates without permitting unconstrained online modification. The Argos prototype integrates a Vbot quadruped, Fast-LIO2 localization and mapping, Hobot-Stereo depth perception, PCT-Planner global planning, EGO-Planner local motion generation, and OpenClaw-orchestrated Qwen3-VL inspection analysis. Experiments in a residential property environment achieved 100% waypoint reachability, outdoor localization error below 10cm, local obstacle-response latency below 200ms, representative hazard-detection rates of 85--95%, and 99% success in alarm delivery and structured-report generation. These results validate the deployed navigation and inspection closed loop, while HROS provides an extensible software foundation for memory-augmented, voice-aware, and continuously improvable embodied inspection agents.

A research idea may be novel, coherent, and scientifically plausible, yet its proposed method may remain insufficiently specified for faithful implementation. We study the codification readiness of implementation-facing research-method specifications, defined by whether they provide sufficient methodological information for a competent implementer or coding agent to construct the intended method without unsupported assumptions. We construct evidence-grounded specifications and their supported resolutions from papers, codebases, issue threads, and reproduction artifacts. We introduce IdeaAMBIG, a benchmark of 660 evidence-grounded instances: 163 real-world gaps from reproducibility reports and GitHub issues, and 497 controlled synthetic gaps injected into codification-ready references. IdeaAMBIG evaluates three capabilities: codification-readiness assessment, defect localization, and clarification action generation. Defect localization receives only the specification, whereas clarification additionally receives the annotated defect. Across 13 LLMs, the best model achieves 9.6% Macro Defect Recovery Rate on real-world instances but 80.6% Macro Clarification Action Success Rate when given the defect. In an oracle study, supplying the gold resolution raises the downstream codification-ready rate from 14% to 98%. Across all evaluated models, defect localization is the main bottleneck, with stronger clarification given the defect.

Product families in large product catalogs suffer from inconsistencies such as duplicates and unit mismatches that degrade customer experience. Detecting these requires reasoning over multiple error types across lengthy product listings, where LLM classification quality degrades due to long-context limitations. We address this by decomposing detection into focused sub-tasks that reduce context and isolate error types, improving F1 from 52% to 87%. For scalable deployment, we introduce Positional Task Conditioning (PTC), which distills this capability into a single smaller model by reinforcing task identity at structural prompt boundaries. PTC outperforms rationale-based distillation across five models and two architecture families, achieving within 1.79% F1 of the frontier at upto 98% lower cost. Our system is deployed across multiple countries processing 10+ million product families.

AI-assisted programming raises distinct questions about who produces code, who feels ownership of it, and who is responsible when it fails. This research note examines these distinctions through a hypothetical enrollment failure and a selective reading of the literature. Identifying the producer of a defective expression does not, by itself, determine the duties of reviewers, release decision-makers, or service operators. Collective ownership likewise leaves those duties to be specified. The discussion then considers how quality engineering can evaluate both generated implementations and the processes that produce them. Acceptance criteria should be justified by the required service outcome, with component checks contributing evidence toward that outcome. This perspective also permits comparison with systems that perform a task without generating a separate program for it. Such substitution would change the object of authorship while leaving the service obligation intact. The note reports no new empirical results; it proposes distinctions and evaluation questions for AI-assisted software production.

Deep learning is an efficient technique to monitor the real time welding process, reducing post-welding repairs and production delays. This paper leverages the monitoring capability by proposing a multi modal temporal attention based deep learning defect detection model for internal defects that are challenging to detect, including porosity, lack of penetration and fusion, undercut, and cold lap during Gas Metal Arc Welding in fillet joints. The model is trained on collected welding images and sound data from an industrial collaborative welding robot. The results show that the attention module can improve the F1 Score to 0.99. We use explainable Artificial Intelligence to interpret the proposed models behavior and dataset distribution, determining potential important areas in image and sound spectrograms and preferred modality to detect each defect. This improves trust and reliability in Artificial Intelligence driven welding inspection.

Industrial inspection pipelines often restore a measured image before a detector acts on it, yet restoration can suppress detector-supported defect structure or create clean-region activations. We formulate restoration as a selective action problem over the measured display, five restored candidates, and review. SafeRestore ranks candidates with action-specific fitted scores, chooses a gate on threshold-tuning data, and evaluates the fixed gate on a disjoint certification sample with two one-sided exact binomial bounds: one for the positive-conditional evidence-loss incident rate and one for the all-accepted excess-activation incident rate. The guarantee is marginal for one policy fixed before its certification outcomes are observed, under an image-level i.i.d. working model. In a retrospective split-sample study of 4,591 public Carinthia-S images, the protocol yields auditable risk-coverage behavior. The primary all-action policy passes in one of five training repetitions (12.0% +/- 26.9% pass-gated test coverage when failures count as zero), whereas fixed bicubic and reduced-complexity variants pass more often. On reserved morphologies, evidence-loss incidence rises to 81.1-90.3%, and KolektorSDD lacks both detector competence and enough positive certification images for the stated target. The contribution is therefore an auditable, detector-relative framework for deciding when a transformed image may be returned automatically and when review remains necessary -- not a claim that adaptive routing outperforms simpler policies on the present evidence.

Recent years have witnessed growing interest in continual anomaly detection for industrial visual inspection. However, real-world manufacturing environments exhibit unpredictable shifts in data distributions, rendering task-dependent continual learning assumptions impractical. To address this limitation, we formulate industrial anomaly detection as a task-free continual learning problem and propose NC-TFAD, a neural-collapse-inspired, geometry-driven framework for learning from non-stationary data streams without task boundaries. NC-TFAD freezes a pretrained backbone and aligns streaming features to a simplex Equiangular Tight Frame (ETF) prototype space to stabilize representation geometry under non-stationary streams. To satisfy the NC-inspired geometric construction in the absence of real anomalies, we generate synthetic anomaly samples as auxiliary anchors during training. Building on this geometry, we further introduce inter- and intra-class regularization together with a Focal Neural Collapse Contrastive (FNCC) loss to suppress representation drift and improve normal-anomaly separability. Finally, a normal-patch-prototype-guided localization branch constructs calibrated patch-wise deviation maps from normal training samples and fuses them with a weak self-attention prior, producing anomaly heatmaps without pixel-level annotations. Extensive experiments on MVTec AD and VisA show that NC-TFAD consistently outperforms representative task-free continual learning methods adapted from general vision, as well as unified anomaly detection baselines, in both image-level detection and pixel-level localization under the task-free continual learning protocol. These results highlight that geometry-driven modeling offers an effective and robust solution for task-free continual anomaly detection in real-world industrial applications.

As LLM coding agents increasingly perform end-to-end engineering work, we lack empirical characterization of how they behave on systems-level requirements: schema design, async orchestration, configuration correctness, and retrieval-filtering trade-offs. We present a case study of one such agent implementing a multi-component data system against a detailed pre-existing specification. Storage technologies, schema, entity-resolution algorithm, and retrieval-filtering strategy were fixed in advance; the agent autonomy was in the implementation, in diagnosing and fixing defects it introduced, and in interaction-design choices left open. Over a single session, we catalog five such defects, categorized by constraint violated and detection method. We further evaluate, on the public HotpotQA benchmark, the one retrieval trade-off specified in that architecture: restricting candidates to a graph-identified entity set before ranking versus unfiltered search. We substitute the benchmark gold evidence labels for entity identification, since we lacked LLM access to run that stage, and report standard recall rather than the benchmark own accuracy metrics. Across retrieval budgets from 1 to 10 and 100 questions against a pooled corpus of 2994 paragraphs, filtered recall reaches its ceiling by a budget of 3, expected once candidates are restricted to the gold paragraphs themselves, while unfiltered search recovers all required evidence only 69 percent of the time even at a budget of 10, a gap that holds at every budget tested, with sign test p less than 0.0001. We close with a discussion of where the agent autonomy succeeded versus required correction, including one instance where a claimed performance fix was never re-measured on the regression that motivated it.

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

Word Sense Disambiguation has advanced rapidly for English and a handful of well-resourced modern languages, but it continues to assume the existence of a sense inventory and a word-to-sense mapping in the source language (Navigli, 2026). These assumptions break down for most historical and low-resource languages, whose dedicated WordNets are either incomplete or still under construction. We present Inspicio, an open-vocabulary retrieval pipeline that links tokens in context to synsets of the Open English WordNet (McCrae et al., 2020) without requiring any source-language inventory or mapping. For each occurrence, an instruction-tuned LLM produces two English translations of the surrounding sentence, a small set of candidate dictionary-style definitions, and a few candidate English lemmas. These outputs drive a hybrid retrieval step that combines dense definition-synset similarity, sparse lemma matching, and Maximal Marginal Relevance re-ranking. We evaluate the pipeline across a 6x6 grid of LLMs and sentence-embedding models on a new bilingual set of manually annotated Latin and Ancient Greek perception verbs, on a subset of PREMOVE dataset (Farina, 2025), and on a diachronic sample of Italian. The best configuration reaches 96% Recall@50 on the perception-verb test set, with each component contributing measurable gains, and remains competitive in the out-of-domain and cross-lingual settings.

Promptable segmentation foundation models such as SAM3 accept an open-vocabulary text concept and return every instance matching it, but adapting them to a specialized domain by full fine-tuning is computationally prohibitive for the organizations that would benefit most. This study applies Low-Rank Adaptation (LoRA) to SAM3 for multi-class structural defect segmentation and examines both how such a model can be supervised from conventional annotation and whether the resulting efficiency gain transfers across datasets. Two contributions are methodological. First, we describe a supervision procedure that trains a concept-promptable model directly from COCO-style class-labeled instance segmentation by using the category name itself as the prompt, requiring no prompt templates, no synonym expansion, and no learned class embeddings. Second, we identify and mitigate a failure mode specific to this setting: because a conventional annotation file yields positive prompts exclusively, the model's presence prediction decouples from the text condition and degenerates into responding to any prompt, a collapse that is invisible to every metric computed on positive prompts alone. Exhaustive hard-negative prompting, in which every dataset category absent from an image is issued as a zero-detection query, addresses this at no annotation cost. Two adapter placements were compared under an identical protocol, updating 0.121% and 1.341% of model parameters. On a purpose-built tunnel lining dataset, pixel intersection-over-union improved from 0.017 to 0.338 and instance-level recall from 0.375 to 0.672; on the independent public Structural Defects Dataset, from 0.017 to 0.855 and from 0.574 to 1.000. Improvements were directionally consistent across ten metrics on both datasets, and the largest per-category gains occurred precisely where zero-shot competence was absent.

Reflective smartphone cover glass is challenging to inspect from a single fixed viewpoint because defect visibility varies with viewing geometry and specular reflections. This gives rise to two practical challenges: defects may be weakly observable from certain viewpoints, while the available visual evidence may remain spatially ambiguous. To address these issues, we propose a multi-view inspection framework in which each RGB observation is processed by a shared per-view expert. A vision-language model (VLM) produces class-aware semantic boxes, while a normal-reference reconstruction branch provides class-agnostic saliency. Their spatial agreement is used as supporting evidence to rank semantic proposals without modifying their coordinates or treating saliency as ground truth. The resulting evidence records are combined at product level without cross-view registration. On 282 production-line images, semantic-saliency association improves $AP_{50}$ from 52.6% to 62.6% by re-ranking fixed semantic proposals. Across 94 products, cross-view evidence recall $R_{\rm prod}@0.5$ increases from 75.5% for the best single view to 88.3% using all three views. These results support the complementary roles of semantic-saliency cross-verification and additional optical observations in reflective-surface inspection.

Railway foreign object detection (RFOD) is critical to safe railway operation, yet scarce real positive samples incompletely represent task-relevant variations in object scale, intrusion relation, railway scene, illumination, and adverse weather. Existing synthetic augmentation can improve RFOD detection, but its gains lack an explicit account of the task-relevant deficiencies complemented by the generated data. We therefore introduce RailSyn, a diagnosis-guided framework comprising a real-referenced Inspector and a requirement-aligned Generator. The Inspector constructs a variable-radius empirical cover from finite real observations to localize candidate completion regions and profile synthetic pools. The resulting audit identifies railway-context, intrusion-semantic, and visual-consistency requirements; the Generator addresses them through domain adaptation, agent-planned placement and physical contact relations, and plan-consistent conditional refinement. Using the Inspector, we further trace representation-space changes across generation variants; the complete system attains a local-shell occupation of $C_{gap}$ to 13.64%, which measures generated coverage of real-derived completion regions. Extensive experiments show AP50--95 gains of up to 4.9 points and consistent improvements across nine mainstream detectors, demonstrating broad cross-architecture utility.

In semiconductor manufacturing, defect analysis is essential, but manual inspection cannot scale. However, existing automated inspection methods remain insufficient for root-cause analysis and process optimization. To this end, we present SePArate, a weakly supervised wafer defect segmentation method. SePArate enables pixel-level separation of patterns by leveraging only image-level annotations. It consists of a three-phase training: encoder pretraining, knowledge transfer to learn spatial cues, and training on synthetic mixed-defect data for accurate segmentation. Experiments demonstrate that SePArate outperforms the baselines.

This paper addresses the challenge of multi-label defect classification in electroluminescence (EL) images of photovoltaic (PV) cells. Training models on images where multiple defects co-occur creates learning ambiguity, making it difficult to disentangle visual features for specific defect types, a problem compounded by the scarcity of examples for individual classes. To tackle this, we introduce Generative Defect Isolation (GDI), utilizing the LaMa inpainting model with Fast Fourier Convolutions to remove selected defects and generate realistic, single-defect training samples. Extensive experiments on Vision Transformer (ViT-S, ViT-L) and EfficientNetV2-L architectures demonstrate that GDI significantly outperforms baselines. The performance gains are most pronounced in low-data scenarios; class-wise analysis shows substantial improvements, boosting the F1-Score for rare defect classes by up to 63.6%. Furthermore, GDI effectively resolves learning ambiguity from co-occurring defects, yielding a 26% reduction in such co-occurring classification errors. Our work establishes GDI as an effective method for maximizing the value of existing segmentation datasets and sets a new performance benchmark for multi-label classification in this domain.

Borehole archives commonly contain core tray photographs and corresponding digital log reports, but no native pixel-level crack annotations. We investigate two complementary approaches for extracting defect-spacing information from these archives. First, structured spacing categories recovered from the report text layer provide weak interval-level labels for classification. A DINO encoder trained on unlabeled core crops supplies domain-specific representations, and a manually verified subset is used to identify label inconsistencies. Second, we manually annotate 5,087 extracted core-row images and evaluate fully supervised crack-segmentation models. Our gated U-Net combines PiDiNet edge maps with Mask R-CNN masks through a learned spatial gating mechanism. This configuration achieves an F1 score of 0.860 and a crack-class IoU of 0.754, the highest result among the evaluated segmentation configurations. Deterministic post-processing converts predicted crack locations into defect-spacing categories. Separate rule-based branches estimate core-relative bedding angles and lithological color descriptors; their predictions agree with log-report references on 75.4% and 84.7% of 1,200 evaluated images, respectively. Because these references are extracted from existing reports, the reported values measure agreement with recorded geological observations rather than independent physical accuracy. The resulting framework combines report-derived weak supervision for spacing classification with fully supervised segmentation for image-based crack localization.

Non-destructive X-ray imaging can reveal internal hazelnut defects that are difficult to detect by external inspection alone; however, automated interpretation remains challenging because of subtle radiographic differences among classes, marked class imbalance, and limited annotated data. Here, we present a benchmark for binary hazelnut quality classification (healthy versus defective) based on 799 segmented single-kernel X-ray images (224 x 224 pixels, grayscale), grouped into 101 acquisition units. Seven single-model configurations and ten probability-aggregation ensembles were evaluated using a group-wise split-rotation protocol across five data splits generated using different random seeds. Decision thresholds were selected on the validation set, and performance was assessed deterministically on validation and test sets. Under the expert-reassessed annotation condition, the average-probability ensemble of the binary cross-entropy-trained convolutional neural network and frozen Swin Transformer achieved the highest mean balanced accuracy (86.3% +/- 1.8%, five seeds), with several other ensembles providing comparable performance. Across methods, substantial split-to-split variability was observed, indicating that multi-split evaluation is essential for reliable model comparison at this dataset scale. Expert reassessment of ambiguous samples improved the performance of all 17 evaluated methods by 2.8-8.1 percentage points, while having only a limited effect on cross-split variance. The results highlight both the potential of deep learning for automated X-ray-based hazelnut quality assessment and the importance of rigorous evaluation and label curation in small, imbalanced agricultural imaging datasets.

Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such a high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel "smart" end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment. In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.

Contact-based industrial inspection requires aerial platforms to maintain stable interaction while rejecting disturbances. Underactuated aerial manipulators present control challenges due to the dynamic coupling between vehicle attitude and force generation. This paper proposes a robust control framework for an underactuated hexarotor equipped with a 1-DoF manipulator to perform sustained contact inspection. The architecture integrates integral-augmented Sliding Mode Control (SMC) for trajectory tracking with an admittance control law for force regulation. The contact force is mapped to a feedforward attitude term, while the 1-DoF arm actively compensates for the tilt to maintain surface alignment. Software-in-the-loop simulations demonstrate that the SMC-based approach achieves superior tracking and coupling rejection compared to traditional PID. Furthermore, the interaction strategy achieved precise force regulation with an RMSE of 0.12N and was able to stably exert up to 20N force, confirming the system's efficacy for stable, reliable contact-based inspection.

Vehicle-mounted road cameras are vulnerable to motion blur, defocus, poor illumination, and noise, which can erase thin cracks and pothole boundaries needed by road defect detectors. This paper presents RMR-Net, a compact task-aware restoration front end that estimates degradation evidence from the image, optionally fuses it with existing corruption context/parameters, conditions lightweight restoration blocks, and returns high-frequency pavement detail through a bounded residual path. The experimental scope is deliberately controlled: the conditioning information used on the Image and Vision Computing New Zealand (IVCNZ) pothole dataset and the Road Damage Dataset: Potholes, Cracks and Manholes (PCM) consists of saved synthetic-generator parameters, not measured vehicle telemetry. A clean-trained, frozen YOLO11s detector evaluates every image source. Across eight held-out degradation conditions, RMR-Net obtains the highest mAP50 in seven, including 0.140-0.427 for IVCNZ motion blur and 0.060-0.233 for PCM defocus. A compact ablation identifies the bounded detail path as the largest local contributor, while degradation conditioning and detector-aware stability terms provide complementary guidance.

This paper presents RobustDefect-LLM, an industrial surface-defect inspection framework integrating deep-learning classification, operator-facing visual evidence, confidence-aware decision support, controlled AI-assisted reporting, traceable storage, and mobile interaction in a unified quality-control workflow. Here, robustness-aware denotes explicit evaluation under controlled image degradation and confidence-aware review routing, not an intrinsic robustness guarantee. Four transfer-learning-based convolutional neural networks, ResNet50, EfficientNet-B0, DenseNet121, and MobileNetV3-Large, were evaluated on 1,799 images from the six-class NEU-DET dataset using fixed training, validation, and held-out in-domain test partitions. MobileNetV3-Large achieved the highest numerical test accuracy (99.26%) and macro F1-score (0.9926), with a bootstrap 95% accuracy CI of 0.9815-1.0000. An exact paired McNemar test found no significant difference from DenseNet121 (p = 1.000). The selected model averaged 0.060 s per CPU forward pass (16.66 FPS). Under combined synthetic degradation, accuracy fell to 87.78% at mild intensity and below 40% at stronger intensities, revealing sensitivity to severe image-quality deterioration. Grad-CAM supplied visual evidence, while predictions with confidence below 0.90 or a top-2 margin below 0.10 were routed to HUMAN REVIEW. This conservative policy provided 12.22% automatic coverage and 100% observed selective accuracy among 33 eligible cases (95% CI: 89.43%-100.00%), while routing both observed classification errors to review. Under nominal controlled conditions, all 100 generated reports passed deterministic consistency checks, with a mean latency of 1.66 s. Results support the feasibility of the integrated workflow while emphasizing the need for calibration, repeated evaluation, and real-world industrial validation.

Under the current standard, Agent Skills are SKILL.md files that combine instructions with supporting resources, enabling Large Language Model (LLM) agents to reuse procedures beyond a single conversation. Yet many public skills appear to originate from a single task, repository, or conversation, even when they are shared as reusable components. We analyze this gap across 138,133 public SKILL.md files from 20,556 repositories using a two-tier defect taxonomy grounded in the official specification and best-practice guidance. We find that 91.8% of skills contain at least one detected defect, with stable estimates across lenient and strict thresholds (88.8-94.6%). The dominant failures are ordinary packaging problems rather than exotic attacks: weak routing metadata, bloated or non-actionable bodies, and poor resource organization. A deterministic routing stress test over 20,000 skills shows the functional impact: skills with valid routing metadata are retrieved more reliably from startup descriptions than skills with routing defects. Defect rates vary by platform and provenance: specification-aware skills contain fewer defects, while AI-marked skills show more safety and portability problems. Lightweight enforcement and repair experiments support a quality-assured generation workflow combining spec-aware prompting, lightweight linting, automated repair, and safety gating.

Reliable identification of railway wheel defects is important for safety and maintenance. This study develops a machine-learning-based diagnostic framework for multi-class defect identification using passive air-coupled ultrasonic acoustic emission signals. Data were collected from eleven full-scale railway wheelsets representing nine health states. Time- and frequency-domain features were evaluated using Kruskal-Wallis statistical testing and mutual-information analysis to identify the most discriminative indicators. A Random Forest classifier was then trained using the selected features with stratified 5-fold cross-validation. The model achieved a balanced accuracy of approximately 0.66 and a Macro-F1 score of 0.65 across the nine classes. Decay rate, kurtosis, skewness, and envelope low-frequency power emerged as the most influential features, while a compact subset of features retained most of the classification performance. The results demonstrate the feasibility of combining passive ultrasonic sensing, statistical feature selection, and supervised machine learning for non-contact railway wheel defect classification and provide a foundation for future field-deployable inspection systems.

Multimodal industrial anomaly detection has largely focused on discrete products using strongly correlated RGB and 3D observations, leaving continuous process manufacturing and weakly correlated sensing modalities underexplored. We introduce LIBAD, the first multimodal anomaly detection benchmark for Li-ion battery electrode manufacturing. Collected from real roll-to-roll production lines, LIBAD provides aligned double-sided visible-light imaging, high-resolution X-ray radiography, and inline-compatible low-resolution X-ray radiography. Electrode patches in LIBAD exhibit highly homogeneous material appearance, while defect evidence can be strong in one modality but weak or absent in another, resulting in pronounced cross-modal anomaly inconsistency. Benchmarks of representative methods under the inline-compatible visible-light and low-resolution X-ray setting exhibit limited transferability and consistently high false-positive rates. We therefore propose DA-Core, a memory-based method that jointly considers feature-space coverage and local density of normal features during coreset selection, allowing compact memory banks to better preserve fine-grained normal variations. With a coreset ratio of 0.05, DA-Core reduces FPR95 from 60.4% to 54.3% compared with standard farthest point sampling. At this ratio, DA-Core also outperforms the best standard coreset result (obtained at 0.20) while reducing inference time by 43.9%. These results suggest that both the data distribution of normal features and the modality relationship itself require explicit consideration when designing anomaly detection methods for process manufacturing.

Automated anomaly detection methods often report strong performance on curated academic benchmarks, but their behavior under real-world industrial conditions is less clear. In this work, we evaluate 19 unsupervised anomaly detection models on the BowTie dataset, a challenging manufacturing dataset with reflective surfaces, subtle defects, and profile-specific variation. In contrast to benchmark results, we observe that model performance is less stable than typically reported on standard benchmarks such as MVTec AD, highly sensitive to preprocessing, and inconsistent across conditions, with no single approach emerging as uniformly robust; a consensus audit further indicates that nominal-data quality affects deployment. Motivated by these findings, we developed and initially deployed a unified human-in-the-loop framework for manufactured-part inspection that combines image annotation, AI-assisted defect detection, and an integrated validation engine, replacing a prior manual visual inspection and documentation workflow. The system supports heatmap-guided defect review, SAM-refined candidate regions for inspector acceptance, rejection, or boundary adjustment, mask evaluation where annotations exist, and review history for inspector consistency and onboarding. Together, the results highlight the gap between benchmark performance and deployment reality, and provide a practical framework for addressing it.

Existing deep-research agents use a Search--Visit workflow that retrieves whole webpages without considering the structure they expose through titles, headings, sections, and metadata. This prevents agents from directly constraining retrieval to parts of a webpage and often carries irrelevant content into their context. We introduce \textsc{Sieve}, a search--inspect--fetch strategy driven by a Boolean Query Language (BQL): it searches webpage fields to filter candidates, uses an interchangeable ranker to order them, presents structure-rich result cards for inspection, and fetches only selected sections. Across three QA collections, \textsc{Sieve} is more accurate than the strongest conventional Search--Visit configuration on each collection while using $20.7$--$50.6\%$ fewer tokens. Boolean filtering improves every tested ranker, and the accuracy--context advantage persists across retriever choices and agent backbones. Our implementation is included in the SkimSearchAgent library at https://github.com/ielab/skim-search-agent.

Standard automated sewer pipe severity assessment relies on direct image classification, creating a "black box" where the link between visual defects and final severity scores remains implicit. This study introduces a modular, fuzzy rule-based neuro-symbolic framework that bridges this gap by decoupling neural perception from symbolic reasoning. The perception module utilizes a Swin Transformer to predict 14 multilabel inspection CODE degrees directly from images. For reasoning, a DT, specifically Weka's J48, algorithm is trained on ground-truth CODEs and severity labels, and its paths are converted into 19 fixed IF--THEN rules. Inference operates via fuzzy logic: t-norm activations from CODE conditions are weighted by rule confidence and combined with corresponding s-norms to produce interpretable class evidence. We assessed Product, Łukasiewicz, and Hamacher operator pairs using a dataset of 3,244 images spanning five highly imbalanced severity classes. Ground-truth labels were robustly generated via consensus from five independent large language models analyzing original inspector notes. Our results show an improvement of accuracy, balanced accuracy, Macro F1 and MCC by 17.9%, 12.2%, 23.0%, and 17.3%, respectively, over image-only based classification. Overall, the framework combines competitive class-balanced performance with traceable reasoning from predicted CODE degrees to rule supports and severity evidence.

Long-horizon steel-equipment inspection requires reasoning over heterogeneous records accumulated across repeated inspection cycles. Existing retrieval-augmented generation systems treat historical logs as a static corpus and retain records without estimating their diagnostic value, failing to report early risk. To this end, we propose ConMem, a contribution-aware memory framework for LLM-assisted equipment inspection, supporting a human-in-the-loop early-risk screening system. Specifically, our ConMem first segments inspection logs into functional evidence units, then estimates each memory unit's contribution to downstream diagnosis through a Shapley-style estimation, and finally retains high-value evidence under a constrained memory budget. In experiments, we evaluate ConMem on real-world dataset and ConMem achieves 76.0% QA accuracy, exceeding the strongest directly comparable baseline. Relative to the naive 8K-context LLM baselines, it reduces the average number of input tokens by 88.2% and response time by 86.6%. Ablation studies also show that the functional-role-aware segmentation and contribution-based valuation are helping prioritize weak degradation signals for targeted field inspection. Practical deployments further confirm that ConMem retains the weak early signal across three inspection cycles, providing an early-stage seal-wear alert targeted for on-site inspectors.

Wind turbine blade defect detection remains highly challenging in real-world inspection scenarios due to limited on-site data and the subtle visual characteristics of defects. In practice, blade defects are often small-scale, low-contrast, and difficult to distinguish from complex backgrounds, which significantly limits the robustness of existing detectors. To address these challenges, we propose BladeYOLO, a defect detection framework for wind turbine blades. Specifically, we integrate a Vision Transformer (ViT) backbone initialized with DINOv3 self-supervised pre-trained weights into YOLOv12-L, enabling the transfer of large-scale generic visual priors to blade defect detection and improving feature representation under limited training annotations. To enhance the perception of subtle defects, we further develop a Mamba-guided Weak-Defect Enhancement module, which consists of a Detail-Enhanced Multi-scale Branch for preserving high-frequency structural cues and a Cross-Mamba module for progressively propagating high-level semantic guidance to shallow features. In addition, we introduce a lightweight Style-Injector module that captures environment-related style information via Fourier decomposition and injects it into selected ViT self-attention layers, thereby improving robustness against environment-induced appearance variations. Extensive experiments demonstrate that BladeYOLO achieves superior performance on the WTBlade-Defect dataset, with additional annotation-budget experiments showing its favorable performance under reduced training annotations. Evaluation on the public Wind Surface Defect dataset further provides supportive evidence for the cross-dataset robustness of BladeYOLO. In particular, on this public dataset, BladeYOLO outperforms the best competing method by 3.5% in mAP$_{50}$ and 2.5% in mAP$_{50-95}$.

While automated defect detection such as the detection of surface scratched is an important aspect in industrial quality control, the scarcity of annotated defect data make this task challenging. This paper presents a procedural rendering pipeline that generates large-scale annotated synthetic training data using BlenderProc, with configurable material appearance, camera modes, and domain randomization, producing automatic COCO-format annotations. To show the potential of our approach, we evaluate four training strategies, namely synthetic-only, real-only, mixed, and fine-tuning from synthetic weights, across two objects with different material properties and three lightweight edge-deployable detectors, YOLOX, YOLO26, and LW-DETR. Our evaluation show that fine-tuning from synthetic weights consistently outperforms real-only training, and that mixed training effectively recovers performance under scarce real-data conditions, with findings validated across both convolutional and transformer-based architectures. The proposed approach enables scalable defect detection without the burden of large real annotated datasets, making it practical for on-device industrial inspection. The pipeline scripts, 3D model, and both synthetic and real annotated scratch datasets for a glossy toy Ferrari car will be made available through the project website upon acceptance.

Agentic systems act, so a defect in the evidence they retrieve becomes a wrong action with a currency cost. The most dangerous enterprise defects are metadata-borne: a stale price or a superseded record, perfectly well-formed in the payload and betrayed only by freshness, lineage, or provenance. Such a defect never enters the agent's context, and an agent cannot doubt data it cannot see. On a priced replenishment benchmark, a competent agent silently converts an injected metadata-borne defect into a costly action about 60% of the time, with zero data-quality flags and behavioral doubt markers at chance (AUC <= 0.50). Across four model tiers spanning roughly 15x in inference price, the rate stays flat: capability does not buy skepticism. A metadata-aware pre-action gate with downstream-only remediation recovers the loss fully on the signals its predicates cover and not at all on those they miss. A model-free oracle derived from the task's decision geometry tracks the measured rates with MAE 0.015 (Pearson r = 0.876, interval coverage 15/16 cells), giving the flat ladder an analytical form. Evidence integrity is a systems axis distinct from model capability; mitigation depends on enforcement placement and predicate coverage. Code, frozen results, and a deterministic analysis pipeline: https://github.com/besanson/dqSarc

Internal self-consistency cannot certify the accuracy of a photogrammetric reconstruction, and the failure is structural rather than a matter of tuning. This matters because hold-out self-validation scores are increasingly offered as quality evidence for metric deliverables whose correctness is otherwise unknown without an external survey. We formalise a track-leakage-free hold-out protocol: a deterministic image subset is withheld, and each withheld view is re-localised against only those 3D points supported by two or more retained images, so no view is tested against structure it helped create. We evaluate it on five GNSS-referenced captures across four sites, 13 ETH3D scenes, a EuRoC flight and 30 IMC 2025 scenes. The protocol is well-posed but does not measure accuracy. It saturates: the internal confidence score stays pinned at 1.00 while true error swings 14.1x within one capture. It is blind to coherent distortion: fragmenting corruption is caught, but internally self-consistent, globally distorted models are not, and were wrong by 55-106 m at confidence 1.00 at three of four captures. On IMC 2025 it separates failed from successful reconstructions (rho = 0.68) yet ranks nothing among the successful (rho = 0.01). Track-leakage-free hold-out measures internal geometric consistency: a fragmentation warning, not a substitute for control-point accuracy assessment.

Quality control in printing, particularly in rotogravure printing, still depends on slow, costly, and subjective manual inspection. Automated surface defect detection is critical for maintaining high-quality standards in rotogravure printing. Deep learning models give prospects for automation. However, training robust deep learning models, such as YOLO or Vision Transformers, is heavily hindered by the extreme scarcity of real-world industrial defects images. To overcome this limitation, this paper introduces a novel synthetic data generation framework tailored for rotogravure printing quality control. The proposed pipeline automatically generates high-fidelity images of specific printing defects (creases, streaks, misregistration, etc.) and outputs corresponding bounding boxes and annotations. To validate the framework, a synthetic dataset of 7533 images was generated and used to train the state-of-the-art object-detection model RFDETR. Experimental results demonstrate that the model trained on our synthetic data achieves a Mean Average Precision (mAP) of 80.9% on real industrial testing samples. This framework provides a zero-cost, rapid-deployment solution for automating defect inspection in printing lines without requiring massive manual data collection.

Steel surface defect segmentation is critical for industrial quality inspection, yet existing methods struggle with elongated, anisotropic defects such as cracks and scratches due to the isotropic receptive fields of standard convolutions and rigid sampling grids that cannot adapt to irregular defect boundaries. To address these limitations, we propose Strip-based Predictor for Deformable Convolutional Networks (SPDCN) with two key innovations. The \textbf{Fuzzy-enhanced Multi-scale Context Module (FMCM)} employs group-wise multi-branch convolutions with an intuitionistic fuzzy channel attention mechanism to adaptively capture multi-scale contextual information across varying defect sizes. The \textbf{Adaptive Direction-Aware Deformable Convolution (ADADC)} replaces the conventional offset predictor with decoupled horizontal and vertical strip convolutions, enabling the deformable sampling grid to anisotropically align with the principal orientation of elongated defects. Extensive experiments on public steel surface defect benchmarks demonstrate that SPDCN consistently outperforms state-of-the-art methods, achieving 89.60% mIoU on NEU-Seg with only 3.54M parameters. The source code is publicly available at https://github.com/DWlzm .

Housing-level urban physical examination is essential for identifying residential building problems and supporting targeted urban renewal. Existing automated inspection studies primarily rely on individual images and rarely examine whether surrounding urban functional context can provide supplementary information for building-level assessment. This study proposes a vision-POI fusion framework that combines multi-view visual inspection with POI-derived neighborhood context for residential building health assessment. The empirical dataset covers 92 old residential communities, 3,237 residential buildings, and 25,608 field-acquired inspection images in Qingdao, China, encompassing seven categories of housing-related issues. First, multiple object detection models are evaluated to extract issue locations, categories, and confidence scores from individual images. The image-level outputs are subsequently aggregated across multiple views to construct interpretable building-level representations. Second, POI features are extracted within 500m, 1,000m, and 1,500m neighborhood buffers to characterize surrounding functional environments. Pearson and Spearman correlation analyses, combined with false discovery rate correction, are used to identify candidate contextual features. Finally, visual and POI features are integrated using a cost-sensitive Random Forest classifier under community-isolated spatial cross-validation. The results show that multi-view aggregation provides the main performance improvement, increasing the building-level Macro-F1 from 60.84% under Direct Detection to 74.95%. Incorporating POI context further increases Macro-F1 to 76.79%, although the additional gain is modest and category-dependent. POI information therefore functions as a supplementary contextual prior rather than a substitute for direct visual evidence or a causal determinant of building condition.

Vision Language Models (VLMs) are well known for hallucinating non-existent objects in images. Objects with missing parts present a unique challenge for VLMs, stemming from both real-world knowledge bias and the scarcity of such images in training data. We present MissingBench-Verified, a benchmark designed to evaluate a specific and practically relevant scenario: when vision-language models fail to recognize that an essential component of an object has been removed. Across ten leading models, we observe consistent and significant failure rates that persist even when external tool evidence explicitly contradicts the model's visual perception. We further ask whether granting models access to image processing tools (e.g., cropping, contrast adjustment) enables autonomous inspection to resolve these failures. We find that existing mitigation strategies, including tool-assisted verification, autonomous visual reasoning, longer reasoning durations, and fine-tuning on an easier dataset, provide negligible improvement, indicating that this failure mode cannot be addressed through current prompting or post-hoc correction techniques. Our findings highlight a fundamental limitation of current VLM for inspection and monitoring tasks and underscore the need for architectural or training-level interventions that enable models to override internal expectations when confronted with contradictory evidence.

Super-resolution can make inspection images appear sharper without preserving the evidence needed to detect a defect. We study this failure mode with a benchmark that separates reconstruction from detection and evaluates both at a predeclared low false-positive rate. Ten end-to-end repetitions combine independently generated line/space and contact-hole images with model training, calibration, clean controls, weak defects, and a held-out defect morphology. Every reconstruction is scored by the same local residual detector, while direct and jointly trained detectors form a separate comparison track. Reconstruction fidelity and inspection utility diverge: the two learned reconstruction models attain the highest structural similarity yet detect fewer defect pixels than bicubic interpolation in every paired repetition. A direct DeepLabV3 detector reaches $0.1984\pm0.0385$ recall at $0.000174\pm0.000084$ false-positive rate and satisfies the held-out feasibility criterion in all ten repetitions. An illustrative joint model, DPU-WaferSR, passes independent clean calibration but exceeds the held-out limit in all ten repetitions, demonstrating that calibration success does not guarantee transfer. Weak-defect recall remains near zero for every feasible method. Applying the unchanged policies to 4,591 public Carinthia-S masks further reveals large method-dependent shifts on real SEM texture. These results support a simple conclusion: super-resolution for inspection should be judged by preserved task evidence and operating-point transfer, not reconstruction quality alone.

6D pose estimation remains a key challenge in robotics and computer vision, particularly in industrial environments. The deployment of currently available data-driven methods is often limited by resource-intensive data pipelines, reliance on textured 3D models, and sensitivity to geometric deviations caused by damages or assembly defects. We present PIXIE, a zero-shot framework that estimates the 6D pose of an object from an RGB image using only an untextured 3D model. Synthetic depth and normal maps are rendered from sampled reference viewpoints and matched to the query image via a pretrained cross-modality feature matcher. Matched keypoints are back-projected to obtain 2D--3D correspondences for PnP-based pose estimation. Relying exclusively on geometry makes the method inherently robust to lighting and texture variation, while correspondence filtering handles geometric deviations between the model and physical object. We evaluate on widely-used public benchmarks, reporting state-of-the-art results on texture-less objects without object-specific training, and introduce a novel dataset with assembly defects, texture variations, and occlusion to demonstrate real-world applicability.

Automated visual inspection of steel surface defects is a recurring quality control task in which labeled defect data is scarce and costly to obtain, while unlabeled surface images are abundant, which motivates self supervised methods that learn useful representations without class labels. A Transformer based Masked Autoencoder is used here to learn representations of steel surface defects for unsupervised grouping. During pretraining, 75% of the input image patches are randomly masked, and a lightweight decoder reconstructs the masked regions from the visible 25%. The encoder is trained jointly with an auxiliary defect localization objective, used only as a training signal and not evaluated as a detector. The decoder reaches a structural similarity score of 0.92 and a mean squared error of 0.47. Features from the pretrained encoder are then clustered using UMAP for dimensionality reduction and Agglomerative clustering, reaching a Hungarian matched accuracy of 91.3% against the six known defect categories.

Few-shot industrial defect detection remains difficult for standard supervised detectors, which achieve poor performance on boundary-dominated industrial defects. This paper proposes rough path signature-guided geometry augmentation (RPS-GA), a geometry-aware approach in which Canny edge contours are treated as ordered planar paths whose truncated second-order signature responses, especially the antisymmetric Lévy-area term, are aggregated into a spatial map that highlights boundary-related structure through two fusion operators, SIG-AUG and SGAA. The approach is evaluated on NEU-DET and PCB-Defect under a few-shot protocol with 5, 10, 20, or 50 labeled images per class, using an unmodified YOLOv8n detector throughout. Compared with the baseline, RPS-GA delivers large gains when supervision is limited, although the margin shrinks as more labels become available. On NEU-DET, SIG-AUG raises 10-shot mAP@0.5 from 0.341 to 0.583, whereas on PCB-Defect, SGAA improves 10-shot mAP@0.5 from 0.086 to 0.299 and yields usable detection at 5-shot where the baseline fails entirely. These trends are confirmed by multi-seed evaluation across independent random partitions. Overall, the results indicate that second-order path-signature geometry offers a practical way to strengthen few-shot industrial defect detection without meta-learning or detector redesign.

A specialist tolerates blind spots that a generalist does not. Usually this is treated as a cost to be minimized. We treat it as a design variable: a deficiency can be kept because it pays and removed on demand in the rare situation where it would be fatal, by routing to a compensation channel. We give three results. First, an advantage condition under which keeping the deficiency is a computable economic position; structurally it is the Ehrlich-Becker market-vs-self-insurance margin applied to a competence gap, with the detector as a Townsend costly-state-verification technology. Second, a two-sided characterization of removability. A coupling lemma shows that when the deficiency is a coarsening of perception, no switch can separate benefit from harm, yielding a converse (a confounded detector earns zero premium, and any within-defect policy insisting on positive premium is driven, under multiplicative dynamics, to negative long-run growth) and an achievability result (a detector outside the deficiency earns a positive premium). Together, over structured uncertainty classes with severity capped or miss rate O(1/L): a defect is profitably removable iff the detector-relevant distinction survives the restriction and the advantage condition holds; the premium is the support function of the class's ROC set at an economic price vector. Third, observation defects and capacity defects differ exactly on whether access to the deployment distribution rescues them; the gap decomposes as cross-leak plus a closure deficit, and per-task randomization buys back the latter, never the former. The detector can be learned from declared fatal categories at a training bill linear in loss severity (up to a log factor). The results synthesize Chow's reject option, Kelly growth under ruin, and selective prediction.

Autonomous coding agents force engineering organizations to choose between API-based frontier models -- strong reasoning at high token cost -- and on-premise quantized open-weights models, which promise low-marginal-cost scaling and data sovereignty at some loss of reasoning fidelity. We study this trade-off through a single-developer, non-randomized longitudinal case study over two contiguous 28-day periods on a production monorepo: an API-based Claude Opus 4.7/4.8 configuration using Claude Code versus an on-premise GLM-5.1/5.2 configuration using Opencode, quantized to NVFP4, on NVIDIA Blackwell hardware. Analyzing LLM telemetry and Git history, we find that prompt caching (99.3% hit rate) cuts realized API cost by 88.6% to an effective $0.57 per million tokens -- below even the $2.83 amortized unit cost of the shared on-premise slice (a utilization-dependent inversion; total realized spend and total cost of ownership (TCO) are the robust quantities). At comparable gross code churn, the local configuration was associated with a far higher defect-repair burden: a Fix Commit Ratio (FCR) of 74.9% versus 45.9%, with the odds of a commit being a repair 2.6 to 4.9 times higher within every difficulty tier (Mantel-Haenszel OR = 3.61). Under Taiwan-market parameters and a symmetric labor model, on-premise deployment nonetheless saves 40.1% of true TCO under shared GPU allocation, whereas dedicated reservation costs 43.8% more than the cached API. Under shared allocation, the genuine penalty is not monetary but a measurable developer-experience burden -- timestamp indicators show more work trapped in debugging spirals and a slower commit cadence -- and an offline replay shows hybrid routing gateways trade defect rate for infrastructure savings along a cost-quality frontier rather than dominate the pure-API baseline.

Deploying AI-based visual inspection in manufacturing is hard because requirements change often, new defect types appear, and large labeled datasets are rarely available. We propose answer-conditioned chain-of-thought (CoT) distillation for rapidly adapting small vision-language models (VLMs) to new industrial tasks using minimal labeled data. A frontier VLM receives each training image along with its correct label and generates a justified visual explanation. A 3B-parameter model is then fine-tuned on these reasoning-augmented examples via LoRA. By conditioning on correct answers, we ensure all training reasoning is directed toward the correct conclusion, which is critical because frontier models score as low as 24.1% on our hardest task. We validate on four industrial classification tasks spanning three image modalities using only 18 to 30 labeled images per task. Across 4 seeds per task (32 training runs), our method outperforms direct fine-tuning on all 16 seed-task combinations, with mean improvements of +1.7 to +4.4 percentage points. A controlled equal-budget experiment confirms the improvement comes from reasoning quality, not additional training steps. An unconditioned baseline demonstrates that with out answer-conditioning, wrong reasoning degrades performance by 17.8 percentage points. On weld radiograph classification, the fine-tuned 3B model outperforms GPT-4.1 by 10.0pp using just 24 training images.

Surface scratch defects in semiconductor manufacturing pose significant challenges due to their irregular shapes, low contrast, and varying scales. Traditional inspection methods often struggle to detect such defects reliably, especially in complex imaging scenarios. While deep learning approaches based on Convolutional Neural Networks (CNNs) have improved accuracy, they often fail to capture fine-grained edge details. To address these limitations, we propose ScratNet, a novel end-to-end scratch segmentation framework that integrates a modified Swin Transformer backbone with a tailored decoder. The decoder incorporates a Multi-Scale Dilated Aggregation (MDA) module to capture both local and global context, a Stem Integration Module (SIM) to restore spatial detail, and a Precision Refinement (PR) branch that enhances boundary sharpness using anisotropic convolutions. Through this stage-adaptive feature aggregation and boundary-aware refinement, ScratNet achieves superior accuracy on thin and irregular defects. Extensive experiments demonstrate that ScratNet consistently outperforms existing methods, providing a scalable and robust solution for automated scratch inspection in high-precision manufacturing.

The integrity of hydrogen infrastructure relies on reliable leak detection, performed almost exclusively via manual tracer gas sniffing in electrolyzer manufacturing. Although mandated by standards, the lack of spatial probe guidance instructions leaves detection reliability entirely to operator execution, further compromised by sensor signal delays. This study quantifies how sniffer trajectory kinematics affect detection reliability at small-scale pipes and fittings, a near-field regime largely neglected by macroscopic dispersion research. Using a robotically guided test bench to eliminate operator variability, static concentration fields and dynamic trajectory passes were acquired across representative geometries under standardized leak rates (5 vol% hydrogen in nitrogen) and varying scanning velocities. Results demonstrate that scanning velocity and spatial probe orientation strongly dictate detectability. Conventional linear trajectories frequently miss leaks under dynamic conditions, causing severe false negatives. Conversely, geometry-specific routing, such as circumferential plunging paths around sealing points, maintains a high safety margin. From these observations, geometry-specific routing rules and a reduction-factor model for dynamic signal loss are derived. The findings reveal that current standard operating procedures pose a tangible safety risk. To operationalize these rules, a proof-of-concept software pipeline is presented, generating validated trajectories directly from 3D models for visualization in assistance systems.

Open-ended curricula in Reinforcement Learning (RL) aim to train generally-capable agents by identifying tasks that facilitate learning increasingly complex skills. A major challenge when designing such curricula is assessing task difficulty relative to the agent's current learning progress. While previous work has explored using scalar task scores or textual summaries of the agent's behavior, here we study a different approach: directly inspecting policy behavior via recorded episode videos. We introduce a simple yet effective instantiation of this approach which leverages a Video Language Model (VLM) to both process these videos and provide curriculum recommendations, which we call Visual Inspection of Policies (VIP). Since videos can naturally contain any number of controllable agents, we empirically study VIP on the StarCraft Multi-Agent Challenge (SMAC). We show that even with a lightweight and openly accessible VLM (VideoLLaMa2-7B), VIP can use policy videos to generate more effective curricula than both its text-only ablation and methods that rely on scalar task scores.

Federated learning (FL) is a collaborative learning scheme to train deep learning models, where collaborating parties can consolidate their models without sharing local data with other parties, hence preserving data privacy. Nevertheless, when implementing FL in Industrial visual inspection (IVI), the constraints posed by limited data availability and the intricate nature of the inspection tasks significantly impact the performance of the resulting model. This paper introduces FedTR, a novel FL framework incorporating transfer learning designed for Autonomous IVI, focusing on the challenging task of identifying label defects through end-to-end text recognition. Transfer learning is a method that leverages the knowledge of a pre-trained model to adapt to a different dataset. FedTR initially trains the model using a publicly available dataset, after which performs the essential federated learning process with model fine-tuning on the distributed and limited private data. Extensive experiment results demonstrate the effectiveness and feasibility of FedTR on private ink cartridge datasets for label defect identification. FedTR achieves an end-to-end text recognition word-level accuracy of 95.5% and 94.2% on homogeneous and heterogeneous data respectively. Additionally, it attains performance levels that are on par with those achieved through centralized training.

Sand boils on earthen levees are safety-critical defects, but pixel-level detection is limited by scarce annotations. We present a diffusion-based synthesis pipeline for low-resource sand-boil imagery. Using Stable Diffusion XL fine-tuned with DreamBooth and conditioned by a multi-branch ControlNet stack, the pipeline generates synthetic inspection images from a small curated reference set. A soft-mask inpainting protocol preserves the real defect pixels while re-rendering the surrounding scene, avoiding seams and color shifts from prior seamless-cloning compositing. A mask-conditioned ControlNet can also generate a new boil inside a chosen mask, making the mask the segmentation label by construction; however, because large-scale label certification remains unresolved with the available real-trained gate, we release the soft-mask preset as the default. Text conditioning is supplied by a taxonomy-driven Prompt Atlas that expands one domain specification into a stratified, CLIP-validated prompt bank and transfers to new defect classes without code changes. From the real training images, the pipeline produces 1,020 synthetic candidates, of which 815 pass a CLIP admissibility filter. We evaluate image quality using distributional and fidelity-diversity measures against the real reference set and a Poisson baseline, and audit for out-of-distribution drift and memorization. No single preset dominates; each trades off fidelity, diversity, and label reliability. We therefore release the label-reliable preset as the default and treat a curated mixture as the natural augmentation set. Our claims are limited to image quality, label provenance, and diversity; downstream segmentation is left for future work. Code and an artifact manifest are released for reproducibility.

This paper presents the IEEE International Conference on Multimedia and Expo (ICME) 2026 Grand Challenge on Cross-Scenario Defect Detection and Fine-Grained Severity Grading for High-Precision Manufacturing. The challenge is motivated by two key limitations of existing industrial defect inspection systems: (1) current deep learning-based methods often suffer significant performance degradation when deployed in unseen production scenarios, and (2) most benchmarks neglect severity-aware assessment, which is critical for risk control and yield optimization. To address these limitations, we design two complementary tracks: Track 1 (Cross-Scenario Defect Detection) targets accurate defect detection, localization, and classification across diverse unseen production environments; Track 2 (Fine-Grained Severity Grading) requires assigning each detected defect an industry-standard severity level, including Acceptable, Marginal NG, NG, and Gross NG. We construct a large-scale industrial dataset of high-resolution microscopic images spanning seven representative defect categories, comprising over 3,800 images with pixel-level instance annotations for Track 1 and over 2,600 images with severity-grade labels for Track 2. The challenge attracted 86 registered participants with 130 submissions; during the final testing phase, 21 teams submitted results and 12 teams provided models with technical reports. The resulting benchmark, together with the diverse and effective solutions contributed by participating teams, sets a new standard for industrial defect analysis research.

Deceptive behavior in LLMs is costly to monitor and prevent, motivating approaches such as Scalable Oversight via Lie Detectors (SOLiD) (Cundy & Gleave, 2025), which uses lie detectors to identify responses for review by high-cost labelers. In this paper, we scale SOLiD to larger models and evaluate it in more diverse and realistic preference-learning settings. We find favorable scaling: undetected deception drops from 34% for 1B-parameter models to 14% for 405B-parameter models at a detector true positive rate of 99%, and expensive human labelers can be removed entirely from the fine-tuning phase without a statistically significant increase in deception. However, SOLiD is sensitive to distribution shift between detector training and preference-training data, which can drive detector false positive rates to impractical levels.

Industrial inspection requires more than binary anomaly detection: a practical system should determine whether an anomaly exists, localize the defective region, identify the defect type, and provide interpretable visual evidence. Existing CLIP-based methods detect and localize anomalies well but offer limited language-level defect understanding, while instruction-tuned vision-language models can describe defects but do not natively produce pixel-level masks. We introduce GenAU, a Generalist vision-language framework for industrial Anomaly Understanding that unifies image-level detection, pixel-level segmentation, multi-type anomaly detection, and defect analysis in a single instruction-following model. GenAU augments a vision-language model with two segmentation tokens, [SEG_defect] and [SEG_normal], whose hidden states act as language-grounded queries over multi-scale visual features for pixel-level localization; the image-level score fuses this map with the decoder's textual normal/defect decision, while the language decoder produces structured defect-aware responses. Trained with a joint language-modeling and segmentation objective, GenAU covers all four tasks within one architecture and recipe, adding zero-shot multi-type detection and language-grounded defect analysis at a quantified cost to detection and segmentation. Across cross-dataset benchmarks, GenAU attains the strongest image-level detection among CLIP-based zero-shot methods on VisA and Real-IAD, with segmentation approaching but not surpassing specialized CLIP baselines.

Quality control in industrial assembly is essential, and real-time monitoring of the assembly process is crucial for preventing costly defects and ensuring production reliability. Vision-based automated inspection offers a powerful solution for such real-time monitoring. However, due to the specialized industrial components and processes, training these models typically relies on task-specific real-world data, which is costly and labor-intensive to collect and annotate. In this paper, we propose a system that automatically generates realistic assembly sequences and further trains real-time inspection models using the synthetic data. It can be efficiently applied to a given task within an hour, requiring only CAD models and simple step descriptions. Focusing on practical challenges, our system integrates a physics-based motion generation module to capture the variance of different human assembly, designs domain-randomized rendering to deal with the environmental complexity and variation, and employs an object-detection-based step recognition module for robust sim-to-real transfer, leading to 92.4% accuracy on a real-world assembly case with 46.7%, 15.8% and 61.2% performance improvement, respectively. Overall, our system provides a practical solution for industrial assembly inspection without requiring expensive real-world data collection and annotation, with the effectiveness validated on real industrial assembly tasks.

The problem of autonomous navigation for UAV inspection remains challenging as it requires effectively navigating in close proximity to obstacles, while accounting for dynamic risk factors such as weather conditions, communication reliability, and battery autonomy. This paper introduces the MOAR path planner which addresses the complexities of evolving risks during missions. It offers real-time trajectory adaptation while concurrently optimizing safety, time, and energy. The planner employs a risk-aware cost function that integrates pre-computed cost maps, the new concepts of damage and insertion costs, and an adaptive speed planning framework. With that, the optimal path is searched in a graph using a discrete representation of the state and action spaces. The method is evaluated through simulations and real-world flight tests. The results show the capability to generate real-time trajectories spanning a broad range of evaluation metrics: around 90% of the range occupied by popular algorithms. The proposed framework contributes by enabling UAVs to navigate more autonomously and reliably in critical missions.