Cross-Modal Fusion

Ensembles of neural networks typically outperform individual networks but incur large computational costs, whereas weight aggregation produces less costly, yet also less accurate, aggregate models. We introduce partial fusion of networks, which interpolates between ensembles and weight aggregation and thus allows for a flexible tradeoff between computational cost and performance. A direct way to achieve this is to extend existing weight aggregation methods based on neuron-level similarity between different networks, where partial fusion then only aggregates weights of neurons which are most similar. We showcase one particular method to jointly identify which neurons are most similar and match them via partial optimal transport. Further, we consider the more general perspective of weight aggregation and partial fusion as generalized pruning of ensemble models, where neurons cannot just be deleted, but also linearly combined. Finally, we show that generalized pruning applied to a single network yields similar benefits as partial fusion by allowing for a tradeoff between isolating, deleting, and linearly combining neurons based on similarity. Our code is available at https://github.com/Fabian-Mor/partial_fusion_nn.

Vision-language models (VLMs) often fail under low illumination because their visual grounding is learned predominantly from RGB imagery, whereas thermal infrared preserves complementary scene structure when visible cues degrade. We present Thermo-VL, a wavelength-aware VLM that augments a frozen Molmo-7B backbone with a trainable thermal encoder and a text-guided dual-attention fusion module. Given aligned RGB tokens, thermal tokens, and prompt embeddings, the fusion module conditions thermal features on both language and RGB context, then injects a gated residual into the frozen RGB stream so thermal evidence can be incorporated without disrupting Molmo's pretrained RGB-language interface. We train the model with the standard language-modeling objective together with auxiliary alignment and regularization losses that improve cross-modal grounding and reduce over-reliance on RGB. We also introduce a pixel-aligned RGB-thermal instruction-tuning dataset and Thermo-VL-Bench, a manually screened RGB-thermal VQA benchmark for low-light and cross-spectrum reasoning. Experiments show strong gains on challenging thermal-only and RGB+thermal reasoning tasks, highlighting the value of prompt-conditioned multispectral fusion. Our dataset and code are publicly available at: https://thusharakart.github.io/Thermo-VL

We introduce ProtoPathway, an interpretable-by-design multimodal framework for cancer survival prediction that unifies whole slide imaging and transcriptomics through encoders producing biologically grounded representations on both sides of the fusion. On the histopathology side, $K$ learnable morphological prototypes, trained end-to-end with the survival objective, serve as the slide representation itself: patches flow into prototype tokens via soft assignment, compressing variable-length patch sets into fixed task-adaptive tokens. On the genomic side, a bipartite graph neural network encodes gene expression within the Reactome pathway hierarchy, producing pathway embeddings that reflect both constituent genes and their broader biological context through bidirectional message passing over a shared gene--pathway graph. Cross-modal attention then operates over a compact prototype $\times$ pathway matrix in which prototypes query pathways, modeling the biological direction in which molecular programs give rise to tissue morphology. Because both axes carry stable task-learned identity, the attention matrix is itself an interpretability output, yielding native inference-time attribution across the full biological hierarchy, from genes through pathways and prototypes to spatial tissue maps. We evaluate on five TCGA cancer cohorts, demonstrating competitive or superior survival prediction with substantially improved biological interpretability and reduced computational cost, with interpretability claims validated through fold-stratified rank-based population-level analysis. Our source code, model weights, and Reactome pathways, together with a unified codebase reimplementing all multimodal survival baselines under identical preprocessing and evaluation, are available at: https://github.com/AmayaGS/ProtoPathway.

Atmospheric turbulence severely degrades video quality by introducing distortions such as geometric warping, blur, and temporal flickering, posing significant challenges to both visual clarity and temporal consistency. Current state-of-the-art methods are based on transformer, 3D architectures and require multi-frame input, but their large computational cost and memory usage limit real-time deployment, especially in resource-constrained scenarios. In this work, we propose ReMATF, a lightweight recurrent framework that restores videos using only two frames at a time while preserving spatial detail and temporal stability. ReMATF combines a multi-scale encoder-decoder with temporal warping and a motion-adaptive temporal fusion module that performs per-pixel fusion between the warped previous output and the current prediction to enhance coherence without enlarging the temporal window. This design reduces flicker, sharpens details, and remains efficient. Experiments on synthetic and real turbulence datasets show consistent improvements in PSNR/SSIM and perceptual quality (LPIPS), along with substantially faster inference than multi-frame transformer baselines, making ReMATF suitable turbulence mitigation in resource-constrained scenarios.

State Space Models (SSMs) have emerged as a powerful and efficient alternative to Transformers, demonstrating linear-time complexity and exceptional sequence modeling capabilities. However, their application to vision tasks remains challenging. First, existing vision SSMs largely depend on manually designed fixed scanning methods to flatten image patches into sequences, which imposes predefined geometric structures and increases the complexity. Second, the broader adoption of vision SSMs is hindered in domains that require query-based interactions between distinct information streams. This is a result of the inherently causal and self-referential nature of SSMs designed for 1D sequence modeling tasks. This fusion mechanism is indispensable for critical perception tasks such as multi-view 3D fusion. To address these limitations, we propose Deformba, a context adaptive method that dynamically augments the spatial structural information while maintaining the linear complexity of SSMs. Deformba also allows multi-modal fusion like cross attention. To demonstrate the effectiveness and general applicability of Deformba, we test its performance on general 2D vision tasks such as image classification, object detection, and segmentation, as well as 3D vision tasks like BEV perception. Extensive experiments show that Deformba achieves strong performance across various visual perception benchmarks.

Road segmentation is a fundamental perception task for autonomous driving and mobile robotics, where both appearance and geometric cues must be processed under edge-computing constraints. Existing multi-modal approaches often improve accuracy with large encoders or expensive global interaction, which limits their use on embedded platforms. We present \textbf{LiteViLNet}, a lightweight RGB-geometry fusion network that combines a MobileNetV3 RGB encoder with a 0.12M-parameter depth-wise-separable geometry encoder. A multi-scale feature fusion module performs modality-specific enhancement, global-query cross-modal interaction, and adaptive gating, while a depth-wise large-kernel bridge enlarges the contextual support of the deepest representation with low overhead. The resulting U-Net-style decoder uses deep supervision only during training. On the KITTI Road benchmark, the 14.04M-parameter full model obtains $97.23\pm0.15\%$ MaxF. On the held-out ORFD test set under the released OFF-Net evaluation protocol, the full model achieves $96.74\pm0.09\%$ F-score and $93.68\pm0.18\%$ IoU. On a Jetson Orin NX, model-only PyTorch FP16 inference reaches $22.18\pm0.21$ FPS; a separate TensorRT FP16 measurement reaches $68.73\pm0.06$ FPS on the Jetson. Camera-depth adaptations and perception-and-control demonstrations on three heterogeneous robot platforms further illustrate the portability of the dual-stream design.

Several large-scale video datasets have been published these years and have advanced the area of video understanding. However, the newly emerged user-generated short-form videos have rarely been studied. This paper presents USV, the User-generated Short-form Video dataset for high-level semantic video understanding. The dataset contains around 224K videos collected from UGC platforms by label queries without extra manual verification and trimming. Although video understanding has achieved plausible improvement these years, most works focus on instance-level recognition, which is not sufficient for learning the representation of the high-level semantic information of videos. Therefore, we further establish two tasks: topic recognition and video-text retrieval on USV. We propose two unified and effective baseline methods Multi-Modality Fusion Network (MMF-Net) and Video-Text Contrastive Learning (VTCL), to tackle the topic recognition task and video-text retrieval respectively, and carry out comprehensive benchmarks to facilitate future research. Our project page is https://usvdataset.github.io.

Autonomous systems and smart-industry deployments increasingly split computation across near-sensor, edge, and cloud resources, where tight energy, latency, and reliability budgets demand run-time adaptivity. In practice, deciding what to compute and transmit at each point is pivotal; yet as multimodal sensor suites (cameras, LiDAR/depth, etc.) proliferate at the edge, most prior approaches either (i) fuse modalities on powerful servers or (ii) apply uni-modal near-sensor filters that ignore cross-modal dependencies, leading to redundant transmissions or missed events. We present FusionSense, a fusion-aware intelligent sensing framework for energy-constrained autonomous edge systems. Lightweight near-sensor classifiers are trained via a three-step procedure: (i) a server-side fusion model learns the downstream task, (ii) filter-out-safe (FoS) labels quantify each modality's necessity relative to the fused decision, and (iii) an edge-side fusion model is compacted by injecting near-sensor predictions as auxiliary signals. The result is a run-time decision layer that jointly reduces compute and communication while scaling linearly with sensor count. On a dual-modality (RGB+Depth/LiDAR) setup with SynDrone, FusionSense sustains task quality at substantially higher data-reduction rates than uni-modal filters and delivers large end-to-end gains: up to 33x lower energy at 1% FoI prevalence, 11x at 10%, a 92.3% reduction in quality loss at a fixed 30% data reduction, and roughly 1.5x higher energy savings than the best prior filtering baseline.

We address out-of-distribution (OOD) detection across the full spectrum of distribution shifts -- global domain changes, semantic divergence, texture differences, and covariate corruptions -- through a multi-encoder fusion of per-encoder representation-space diffusion models (RDMs). We statistically identify each encoder's sensitivity to specific shift types from ID data alone and introduce EncMin2L -- an encoder-agnostic two-level $\min(\cdot)$-gate that combines and calibrates per-encoder diffusion-based likelihood detectors without OOD labels, outperforming monolithic multi-encoder baselines at $2.3\times$ lower parameter cost. Two ID-data diagnostics: $η^2$ (class-conditional F-test) and $Δμ$ (log-likelihood shift under synthetic corruptions) -- quantify encoder specialization, while a Tippett minimum $p$-value combination aggregates per-encoder scores into a single, calibration-stable OOD signal. EncMin2L achieves $\geq 0.94$ AUROC across all four shift types simultaneously, outperforming the state-of-the-art representation-space diffusion OOD detectors across overlapping benchmarks.

Omni-modal large language models (om-LLMs) achieve unified audio-visual understanding by encoding video and audio into temporally aligned token sequences interleaved at the window level. However, processing these dense non-textual tokens throughout the LLM incurs substantial computational overhead. Although training-free token selection can reduce this cost, existing methods either focus on visual-only inputs or prune om-LLM tokens only before the LLM with fixed per-modality ratios, failing to capture how cross-modal token importance evolves across layers. To address this limitation, we first analyze the layer-wise token dependency of om-LLMs. We find that visual and audio dependencies follow a block-wise pattern and gradually weaken with depth, indicating that many late-layer non-textual tokens become redundant after cross-modal fusion. Motivated by this observation, we propose SEATS, a training-free, stage-adaptive token selection method for efficient om-LLM inference. Before the LLM, SEATS removes spatiotemporal redundancy via attention-weighted diversity selection. Inside the LLM, it progressively prunes tokens across blocks and dynamically allocates the retention budget from temporal windows to modalities using query relevance scores. In late layers, it removes all remaining non-textual tokens once cross-modal fusion is complete. Experiments on Qwen2.5-Omni and Qwen3-Omni demonstrate that SEATS effectively improves inference efficiency. Retaining only 10% of visual and audio tokens, it achieves a 9.3x FLOPs reduction and a 4.8x prefill speedup while preserving 96.3% of the original performance.

Medical image segmentation is more clinically valuable when it supports diagnosis rather than merely producing lesion masks. However, diagnostically relevant lesion cues are often subtle and localized, while existing models may be distracted by background tissues, acoustic artifacts, and irrelevant visual correlations. To address this problem, we propose Rad-VLSM, a two-stage cross-modal framework for semantics-assisted lesion focusing, robust segmentation, and visually grounded diagnosis. In the first stage, a BLIP-2-based vision-language alignment module identifies lesion-related candidate regions under semantic guidance and converts them into box prompts. In the second stage, these prompts are fed into a SAM-based multitask network, where a multi-candidate region aggregation strategy improves prompt stability and guides lesion segmentation. The predicted masks are then used as spatial priors for diagnosis, and a visual-radiomics fusion head integrates lesion-aware visual features with selected radiomics descriptors. By using semantic information for localization rather than direct prediction, Rad-VLSM reduces text-to-diagnosis dependence and grounds diagnosis in lesion-level evidence. Experiments on a private clinical breast ultrasound dataset and public benchmarks show that Rad-VLSM achieves strong segmentation and diagnostic performance with favorable generalization.

Aggregate object detection metrics inherently mask catastrophic and repeatable failures in operationally critical, long-tail minority classes. This paper formally defines this pervasive vulnerability as the Hard-Category Reliability Problem (HCRP): the fundamental architectural challenge of strictly rectifying vulnerable categories without compromising the performance boundaries of stable classes under stringent protocols. To systematically dismantle this limitation, we propose Error-Decomposed Class-Conditional Fusion (ED-CCF), an elegant decision-layer inference framework. Diverging from heuristic global post-processing, ED-CCF projects predictions into a sophisticated quad-state error taxonomy, dynamically activating calibration pathways exclusively upon rigorous empirical justification. On a highly constrained 600-image validation benchmark, isolating cz as the critical vulnerability (HCEC=0.86, BSR=0.14), our framework achieves a targeted breakthrough: it elevates cz mAP50 from 0.089343 to 0.109353 (a massive +22.4% relative surge) while flawlessly preserving the Pareto optimality of global stability (raising all mAP50 from 0.581925 to 0.584864). Backed by exhaustive validation across 50 paired subset trials demonstrating an overwhelming 96% win rate and strict Bonferroni-corrected Wilcoxon significance (p<0.05), this work fundamentally redefines output-level fusion as an auditable, statistically guaranteed paradigm for safety-critical visual perception.

Tactile sensing is a fundamental modality for embodied intelligence, offering unique and direct feedback on contact geometry, material properties, and interaction dynamics that remote sensors cannot replace. However, unimodal tactile perception is inherently limited by its sparse spatial coverage and lack of global semantic context. With the recent explosion in deep learning and large language models, integrating tactile with vision and language has become essential to bridge physical interaction with semantic reasoning, leading to the emergence of Multimodal Tactile Fusion. Despite rapid progress, the existing researches remain fragmented across disparate datasets, sensing modalities, and tasks, lacking a unified theoretical framework. To address this gap, this paper provides a comprehensive survey of multimodal tactile fusion research up to the first quarter of 2026. We propose a hierarchical taxonomy that organizes the field into two primary dimensions: multimodal datasets and multimodal methods. On the data side, we categorize resources ranging from Tactile-Vision datasets, Tactile-Language datasets, Tactile-Vision-Language datasets, and Tactile-Vision-Other datasets. On the method side, we structure prior work into three core pillars: (1) Multimodal Perception and Recognition, which focuses on object understanding and grasp prediction; (2) Cross-Modal Generation, focusing on bidirectional translation between tactile, vision, and text; and (3) Multimodal Interaction, emphasizing feedback control and language-guided manipulation. Furthermore, we summarize representative tactile sensing hardware, review commonly used evaluation metrics and benchmark settings, and discuss current challenges and promising future directions.

Although large-scale visual foundation models (VFMs) achieve remarkable performance in semantic understanding, they still underperform in instance-aware dense prediction tasks. They exhibit different biases in representation: for instance, promptable segmentation models (e.g., SAM2) focus on fine-grained region boundaries, while self-supervised models (e.g., DINOv3) emphasize object-level structure. This observation highlights the potential of combining complementary features from different VFMs to enhance downstream dense prediction tasks. However, naive multi-VFM fusion seldom leads to reliable gains, and interpretable principles for leveraging their complementary features are still underexplored. In this work, we propose a metric-guided approach that effectively selects and aggregates complementary features from different VFMs based on explicit assessment scores. Specifically, we design a suite of label-free metrics in feature space across two aspects, Structural Coherence and Edge Fidelity, to assess features of VFM encoders. Guided by these scores, we identify complementary edge-strong and structure-strong encoder pairs, and integrate them via a master-auxiliary fusion scheme. This feature fusion requires no complex architectural changes and is trained only in a single stage. Our model shows consistent performance gains across multiple dense prediction tasks compared with the baselines, with better object-level semantics and more accurately localized boundaries. The code is available at {https://github.com/gyc-code/metric-guided-fusion}.

Multimodal clinical prediction faces three challenges: multiple foundation models (FMs) with complementary strengths per modality, pervasive missing modalities at training and test time, and sample-specific variation in modality contributions. We introduce MedMIX, a multimodal framework that combines intra-modality expert fusion, learned inter-modality fusion, and training-only large--small model collaboration for robust medical prediction under incomplete modalities. Within each modality, MedMIX aggregates complementary embeddings from multiple small expert models; across modalities, it performs learned fusion over available modalities; and during training, it leverages large teacher models to improve deployed representations without additional inference cost. Across three heterogeneous benchmarks (OpenI, MIMIC-IV-MM, and MMIST-ccRCC), MedMIX achieves consistently strong performance while remaining robust under controlled missing-modality perturbations, and further demonstrates sustained robustness under cross-cohort shift on MIMIC-III. These results highlight MedMIX as a practical framework that unifies within-modality expert collaboration, sample-specific cross-modality fusion, and efficient large--small model collaboration while remaining robust to incomplete modalities.

Federated Learning (FL) enables collaborative training across decentralized clients, but most methods assume aligned feature schemas, an assumption that rarely holds in tabular settings where clients observe only partially overlapping feature subsets. In these heterogeneous feature spaces, parameter-averaging methods (e.g., FedAvg) transfer little information across weakly overlapping or disjoint feature groups, limiting their effectiveness for federated imputation. To overcome this, we propose \textbf{FedHF-Impute}, a federated imputation framework that separates structural feature unavailability from conventional missingness and uses a shared global feature graph to propagate information across statistically related features through message passing. This enables indirect cross-client knowledge transfer, even when features are never jointly observed locally, while preserving standard federated communication. Under simulated partial schema overlap on the SECOM and AirQuality datasets, FedHF-Impute improves imputation accuracy (RMSE) over FL baselines by 26.9%, and 8.4% respectively, while achieving comparable performance on PhysioNET, with only a 0.3% difference relative to the best baseline.

Biomedical Vision--Language Models (VLMs) have shown remarkable promise in few-shot medical diagnosis but face a critical bottleneck: \textit{fragility to prompt variations}.Existing adaptation frameworks typically optimize visual and textual prompts as independent streams, relying on ideal ``Golden Prompts''. In clinical reality, where descriptions are often noisy and heterogeneous, this modality isolation leads to unstable cross-modal alignment. To address this, we propose BiomedAP, a vision-informed dual-anchor framework with gated cross-modal fusion.BiomedAP enforces synergistic alignment through two mechanisms: (1) Gated Cross-Modal Fusion, which enables layer-wise interaction between modalities, acting as a dynamic noise regulator to suppress irrelevant textual cues; and (2) a Dual-Anchor Constraint that regularizes learnable prompts toward stable semantic centroids derived from both expert templates (High Anchors) and few-shot visual prototypes (Low Anchors). Extensive experiments across 11 benchmarks demonstrate that BiomedAP consistently surpasses baselines, achieving competitive few-shot accuracy and markedly enhanced robustness under prompt perturbations. Our code is available at: https://github.com/tongdiedie/BiomedAP. Keywords: Vision-Language Models; Prompt Learning; Parameter-Efficient Fine-Tuning; Few-shot Learning

Reliable detection of humans beneath forest canopy remains a difficult remote-sensing challenge due to sparse, structured, and viewpoint-dependent occlusion. This paper presents a multimodal proof-of-concept pipeline that integrates three complementary approaches: (i) experimental evaluation of LiDAR returns through vegetation to assess the feasibility of active sensing, (ii) visible--thermal image fusion using a multi-scale transform and sparse-representation framework to enhance human saliency, and (iii) synthetic-aperture image formation via Airborne Optical Sectioning (AOS) to suppress canopy clutter. A YOLOv5 detector is fine-tuned on the Teledyne FLIR thermal dataset and evaluated on thermal and fused imagery. Results show that the tested terrestrial LiDAR configuration provides limited penetration for object-level detection, while visible--thermal fusion improves target visibility in low-contrast scenes and AOS enhances ground-plane detection in synthetic forest imagery. The fine-tuned YOLOv5 achieves a mean average precision of $\sim$0.83 on the top three FLIR classes. These findings establish an initial baseline for UAV-deployable search-and-rescue and surveillance systems operating in forested environments, and motivate future work on dedicated forest datasets and real-time multimodal integration.

Face restoration under complex degradations still remains an ill-posed inverse problem due to severe information loss. Although diffusion models benefit from strong generative priors, most methods still condition only on low-quality inputs, making it difficult to recover identity-critical details under heavy degradations. In this work, we propose HDRFace, a High-Dimensional Representation conditioned Face restoration framework that injects semantically rich priors into the conditional flow without modifying the generative backbone. Our pipeline first obtains a structurally reliable intermediate restoration with an off-the-shelf restorer, then uses a pretrained high-dimensional feature encoder to extract fine-grained facial representations from both the low-quality input and the intermediate result, and injects them as additional conditions for generation. We further introduce SDFM, a Structure-Detail aware adaptive Fusion Mechanism that emphasizes global constraints during structure modeling and strengthens representation guidance during detail synthesis, balancing structural consistency and detail fidelity. To validate the generalization ability of our method, we implement the proposed framework on two generative models, SD V2.1-base and Qwen-Image, and consistently observe stable and coherent performance gains across different architectures.

Deep learning and multi-modal fusion have demonstrated transformative potential in medical diagnosis by integrating diverse data sources. However, accurate prognosis for ischemic stroke remains challenging due to limitations in existing multi-modal approaches. First, current methods are predominantly confined to dual-modal fusion, lacking a framework that effectively integrates the trifecta of medical images, structured clinical data, and unstructured text. Second, they often fail to establish deep bidirectional interactions between modalities; To address these critical gaps, this paper proposes a novel tri-modal fusion model for ischemic stroke prognosis. Our approach first enriches the data representation by employing a Large Language Model (LLM) to automatically generate semi-structured diagnostic text from brain MRIs. This process not only addresses the scarcity of expert annotations but also serves as a regularized semantic enhancement, improving multimodal fusion robustness. Furthermore, we design a core component termed the Vision-Conditioned Dual Alignment Fusion Module (VDAFM), which strategically uses visual features as a conditional prior to guide fine-grained interaction with the generated text. This module achieves a dynamic and profound fusion through a dual semantic alignment loss, effectively mitigating modal heterogeneity. Extensive experiments on a real-world clinical dataset demonstrate that our model achieves state-of-the-art performance.

Precipitation nowcasting is a vital spatio-temporal prediction task for meteorological applications but faces challenges due to the chaotic property of precipitation systems. Existing methods predominantly rely on single-source radar data to build either deterministic or probabilistic models for extrapolation. However, the single deterministic model suffers from blurring due to MSE convergence. The single probabilistic model, typically represented by diffusion models, can generate fine details but suffers from spurious artifacts that compromise accuracy and computational inefficiency. To address these challenges, this paper proposes a novel coarse-to-fine Vision Mamba Unet and residual Diffusion (VMU-Diff) based precipitation nowcasting framework. It realizes precipitation nowcasting through a two-stage process, i.e., a deterministic model-based coarse stage to predict global motion trends and a probabilistic model-based fine stage to generate fine prediction details. In the coarse prediction stage, rather than single-source radar data, both radar and multi-band satellite data are taken as input. A spatial-temporal attention block and several Vision mamba state-space blocks realize multi-source data fusion, and predict the future echo global dynamics. The fine-grained stage is realized by a spatio-temporal refine generator based on residual conditional diffusion models. It first obtains spatio-temporal residual features based on coarse prediction and ground truth, and further reconstructs the residual via conditional Mamba state-space module. Experiments on Jiangsu SWAN datasets demonstrate the improvements of our method over state-of-the-art methods, particularly in short-term forecasts.

Hyperspectral image (HSI) classification is challenging in complex scenes due to spectral ambiguity, spatial heterogeneity, and the strong coupling between material properties and geometric structures. Although LiDAR provides complementary elevation information, most HSI-LiDAR fusion methods rely on CNNs or MLPs with fixed activation functions and linear weights. These methods struggle to model structural discontinuities in LiDAR data, intricate spectral features of HSI, and their interactions. In addition, fusion of the two modalities in both spatial and frequency domains with LiDAR guidance remains underexplored. To address these issues, we propose the Implicit Frequency-Geometry Fusion Network (IFGNet), which leverages Kolmogorov-Arnold Networks (KANs) with learnable spline-based functions to adaptively capture highly nonlinear relationships between hyperspectral and LiDAR features. Furthermore, IFGNet introduces a LiDAR-guided implicit aggregation module in both spatial and frequency domains, enhancing geometry-aware spatial representations while capturing global structural patterns. Experiments on the Houston 2013 and MUUFL benchmarks demonstrate that IFGNet consistently outperforms existing fusion methods in overall accuracy, average accuracy, and Cohen's Kappa, while maintaining an efficient architecture.

Multimodal physiological data powers clinical AI systems from intensive care units to wearable devices, but sensors routinely fail in practice. Two failure modes are common: modality missing, where an entire channel is absent, and within-modality missing, where a contiguous time segment is lost. No existing benchmark evaluates multiple fusion architectures under both failure modes at controlled severity levels across diverse clinical datasets. We present MuteBench, a benchmark covering 9 datasets from 7 clinical domains, 6 fusion architectures, and 2 missing-data modes over 125,000 samples. Through this benchmark, we find that architecture family is the strongest predictor of robustness, outweighing parameter count. Channel-independent models tolerate modality missing well but can be sensitive to within-modality missing, especially on short sequences. Curriculum modality dropout protects reliably only up to the maximum dropout rate used in training. We also find that channel count, sequence length, and modality alignment jointly determine which failure mode poses the greater threat. Finally, a PTB-XL case study suggests that diffusion-based imputation can improve downstream classification under within-modality missing, with the largest gains for models whose expert routing is most sensitive to corrupted inputs, though broader validation across datasets remains an open direction. MuteBench provides practitioners with concrete guidance for both selecting existing architectures and informing the design of future robust multimodal fusion methods.

Digital phenotyping enables continuous passive monitoring of behavior and physiology, offering a promising paradigm for early detection of psychotic relapse. In this work, we develop and systematically study two smartwatch-based frameworks for daily relapse detection. The first forecasts cardiac dynamics and flags deviations between predicted and observed features as indicators of abnormality. The second adopts a multi-task formulation that fuses sleep with motion and cardiac-derived signals, learning time-aware embeddings and predicting measurement timing. Both pipelines use Transformer encoders and output a daily anomaly score, derived from predictive uncertainty estimated via an ensemble of multilayer perceptrons to improve robustness to real-world wearable variability. While each framework independently demonstrates strong predictive power, we show that they capture complementary physiological signatures. Consequently, we propose a late-fusion strategy that synergistically combines the anomaly signals from both architectures into a unified decision score. We benchmark our methodology on the 2nd e-Prevention Grand Challenge dataset, where our fused model achieves a 8% relative improvement over the competition-winning baseline. Our results, supported by extensive ablation studies, suggest that the integration of diverse digital phenotypes, cardiac, motion, and sleep, is essential for the high-fidelity detection of psychotic relapse in real-world settings.

We present NERVE (Neuromorphic Vision and Radar Ensemble), a multi-sensor dataset comprising 257 minutes of synchronized recordings from five sensors: two Dynamic Vision Sensors (DVS), an RGB-D camera, and two Radar units (24GHz and 77GHz). Captured across 12 measurement days in office environments, NERVE contains around 600GB of uncompressed temporally aligned data with around 914,000 frames and around 9.6 million RGB COCO-formatted annotations covering 16 relevant object categories. To evaluate multi-modal fusion, we construct a DVS+Radar subset for human detection and distance estimation. Baseline experiments using feed-forward and recurrent detectors show that combining DVS with 77GHz Radar consistently improves detection, with recurrent models achieving up to 47.5% mAP and mean absolute Radar distance errors below 1.8m against LiDAR ground truth.

Automated driving has made remarkable progress, yet situations still arise where human intervention is necessary. Teleoperation provides a scalable solution to address such cases, enabling remote operators to support vehicles without being physically present. In this context, video transmission forms the operator's primary source of situational awareness, making video quality a decisive factor for both safety and task performance. In an online study, participants rated compressed video sequences from the Zenseact Dataset and provided subjective quality ratings. These ratings were then used to retrain the Video Multi-Method Assessment Fusion (VMAF) model, yielding an adapted variant tailored to teleoperation. The retrained model demonstrated improved alignment with human ratings compared to the original 4K VMAF. In particular, RMSE decreased from 10.36 to 8.83, and MAD from 8.71 to 6.38, corresponding to improvements of 15% and 27%, respectively. These results highlight that incorporating domain-specific data can enhance the predictive power of established quality metrics in safety-critical applications. At the same time, Outlier cases emerged in which videos received high objective scores despite noticeable degradations in regions critical for the driving task.

Gesture recognition is a cornerstone of Human-Computer Interaction (HCI) for smart eyewear, enabling natural and device-free control in augmented reality environments. Traditional vision-based approaches face significant challenges regarding power consumption, computational latency, and user privacy. This paper proposes a lightweight, privacy-preserving gesture recognition system based on the fusion of low-resolution Time-of-Flight (ToF) and Infrared (IR) thermal sensors. We used an 8 times 8 multizone ToF sensor (VL53L8CH) and an 8 times 8 IR array (AMG8833) to capture complementary depth and thermal cues. A compact Convolutional Neural Network (CNN) with a specialized grouped-convolution architecture is designed to fuse these modalities efficiently on a microcontroller (MCU). Experimental results on a custom dataset of 7 static gestures, validated via k-fold cross-validation, demonstrate that the proposed fusion strategy significantly outperforms single-sensor baselines with an accuracy of 92.3% and a macro F1-score of 0.93. Finally, on-device benchmarks on STM32F4 and STM32H7 MCUs confirm the system's suitability for resource-constrained wearables, requiring only 6,343 parameters and achieving millisecond-level inference latency with a total system power of 50 mW.

Infrared and Visible Image Fusion (IVIF) has shown promise in visual tasks under challenging environments, but fusion under unregistered conditions faces inherent misalignments. Current studies to solve them either predict the deformation parameters coarse-to-fine (i.e., coarse registration and fine registration) or estimate the deformation fields in multi-scales for registration. Though straightforward, they overlook the cumulative errors in registration, which contaminate the fusion stage and severely deteriorate the resulting images. We introduce the Spatial-Frequency Registration and Fusion (SFRF) framework, which incorporates uncertainty estimation and infrared thermal radiation distribution consistency into a unified pipeline to handle the error accumulation for robust registration and fusion across both spatial and frequency domains. Specifically, SFRF constructs a Multi-scale Iterative Registration (MIR) framework that iteratively refines the deformation field across scales, leveraging uncertainty estimation at each stage to mitigate error accumulation and enhance alignment accuracy dynamically. To ensure the accurate alignment of infrared thermal distributions during registration, thermal radiation distribution consistency is employed as a frequency-domain supervisory signal, promoting global consistency in the frequency domain. Based on the spatial-frequency alignment, SFRF further adopts a Dual-branch Spatial-Frequency Fusion (DSFF) module, which incorporates spatial geometric features and frequency distribution information to reconstruct visually appealing images. SFRF achieves impressive performance across diverse datasets.

Pertussis booster vaccination produces immune responses that vary widely across individuals in both peak magnitude and long-term durability. These two phases are governed by partly distinct biological compartments:peak reflects acute B-cell activation and antibody secretion, while durability reflects the establishment of long-term humoral memory. Yet most computational models target only one, missing the full boost-and-wane trajectory. Jointly predicting both is non-trivial because the two endpoints are biologically dissociated rather than redundant; samples are small, modalities are heterogeneous with structured missingness, and the two tasks rely on different measurement windows. We propose a multi-task contrastive multimodal fusion architecture combining frozen TabPFN-v2 per-modality encoders, a dual-label supervised contrastive loss that treats two subjects as a positive pair if they agree on the Task 1 label or the Task 2 label, modality dropout calibrated to empirical missingness, and missingness-masked attention fusion. Applied to a curated subset of the CMI-PB pertussis booster dataset (n = 158 subjects, four modalities, 44.9% with at least one modality missing; Spearman r = -0.58 between peak and durability, n = 96), the model achieves test AUROC 0.797 (95% CI [0.621, 0.948]) for peak response and 0.755 (95% CI [0.519, 0.945]) for durability, with both significant under joint label permutation (N = 1000; p = 0.002 and p = 0.045). Across logistic regression, XGBoost, and MLP baselines on raw features and on TabPFN embeddings, the proposed model is the only one whose 95% CIs lie above chance on both tasks simultaneously. Per-modality contribution analyses recover task-specific modality contributions consistent with the underlying immunology: peak prediction is carried by cytokine signatures, while durability is carried by baseline antibody features.

The proliferation of sophisticated image editing tools and generative artificial intelligence models has made verifying the authenticity of digital images increasingly challenging, with important implications for journalism, forensic analysis, and public trust. Although numerous forensic algorithms, ranging from handcrafted methods to deep learning-based detectors, have been developed for manipulation detection, individual methods often suffer from limited robustness, fragmented evidence, or weak generalization across manipulation types and image conditions. To address these limitations, we present \textbf{FRAME}, a method for \textbf{F}orensic \textbf{R}outing and \textbf{A}daptive \textbf{M}ulti-path \textbf{E}vidence fusion for image manipulation detection. FRAME organizes diverse forensic algorithms into a multi-path analysis space, adaptively selects informative forensic paths for each input image, and fuses complementary evidence to improve detection and localization performance. By moving beyond single-method analysis and fixed fusion strategies, FRAME provides a more robust and flexible approach to image forensic reasoning while preserving interpretable forensic cues from multiple evidence sources. Experimental results demonstrate the effectiveness of FRAME across diverse manipulation scenarios. Code is available at \href{https://github.com/kzhao5/FRAME}{https://github.com/kzhao5/FRAME}.

Safe autonomous agents and mobile robots need fast real time 3D perception, especially for vulnerable road users (VRUs) such as pedestrians. We introduce a new bird's eye view (BEV) encoding, which maps the full 3D LiDAR point cloud into a light-weight 2D BEV tensor with three height bands. We explicitly reformulate 3D detection as a 2D detection problem and then reconstruct 3D boxes from the BEV outputs. A single network detects cars, pedestrians, and cyclists in one pass. The backbone uses area attention at deep stages, a hierarchical bidirectional neck over P1 to P4 fuses context and detail, and the head predicts oriented boxes with distribution focal learning for side offsets and a rotated IoU loss. Training applies a small vertical re bin and a mild reflectance jitter in channel space to resist memorization. We use an interquartile range (IQR) filter to remove noisy and outlier LiDAR points during 3D reconstruction. On KITTI dataset, TriBand-BEV attains 58.7/52.6/47.2 pedestrian BEV AP(%) for easy, moderate, and hard at 49 FPS on a single consumer GPU, surpassing Complex-YOLO, with gains of +12.6%, +7.5%, and +3.1%. Qualitative scenes show stable detection under occlusion. The pipeline is compact and ready for real time robotic deployment. Our source code is publicly available on GitHub.

Fused Gromov-Wasserstein (FGW) distances provide a principled framework for comparing objects by jointly aligning structure and node features. However, existing FGW formulations treat all features uniformly, which limits interpretability and robustness in high-dimensional settings where many features may be irrelevant or noisy. We introduce FGW distances with feature selection, which incorporate adaptive feature suppression weights into the FGW objective to selectively downweight or suppress differentiating features during alignment. We propose two approaches: (1) regularized FGW with Lasso and Ridge penalties, and (2) FGW with simplex-constrained weights, including groupwise extensions. We analyze the resulting models and establish their key theoretical properties, including bounds relative to classical FGW and Gromov-Wasserstein distances, and metric behavior. An efficient alternating minimization algorithm is developed. Experiments illustrate how feature suppression enhances interpretability and reveals task-relevant structure, with a special application to computational redistricting.

We propose a novel multimodal deep learning framework for patient-level survival prediction, which integrates whole-slide histology features, RNA-seq expression profiles, and clinical variables. Our architecture combines an ABMIL module~\cite{ilse2018attention} for slide-level representation with feedforward encoders for RNA and clinical data. These embeddings are then integrated through low-rank bilinear cross-modal fusion~\cite{liu2018efficient} to model conditional interactions across modalities while controlling parameter growth. The model outputs continuous risk scores that are subsequently mapped to survival times using a nonparametric calibration procedure based on the Kaplan--Meier estimator~\cite{kaplan1958nonparametric}. By decomposing multimodal reasoning into independent pairwise interactions, the proposed fusion design promotes structural interpretability and parameter efficiency compared with full tensor and hierarchical fusion strategies. Experiments on the CHIMERA challenge dataset demonstrate improved predictive performance over concatenation-based baselines and competitive generalization on hidden evaluation cohorts. These results indicate that the proposed framework is a promising approach for multimodal survival prediction in HR-NMIBC. The implementation is publicly available at https://github.com/hassancpu/ChimeraChallenge2025_Task_3.

Radar-camera depth estimation must turn an ultra-sparse, all-weather, metric radar signal into a dense per-pixel depth map. Existing methods -- concatenation, confidence-aware gating, sparse supervision, graph-based extraction -- combine radar and image features outside the backbone's sequence operator, and even cross-modal Mamba variants leave the selection mechanism itself unimodal. We argue that the selection mechanism is the right place for radar to enter. We introduce Radar-Modulated Selection (RMS), a minimal and principled way to inject radar into Mamba's selective scan: radar modulates the scan from within, adding zero-initialised perturbations to the step size $Δ$ and readout $\mathbf{C}$ while leaving the input projection $\mathbf{B}$ and state dynamics $\mathbf{A}$ image-only. The construction is exactly equivalent to a pretrained image-only Mamba at initialisation, ensuring radar only influences the model where it improves accuracy. Two further properties follow that out-of-scan fusion cannot offer: linear-cost cross-modal coupling at every recurrence step, and a natural fallback to the image-only backbone when radar is absent. We deploy RMS in a Multi-View Scan Pyramid (MVSP) that matches the fusion operator to radar's spatial reach at each scale. SemoDepth achieves state-of-the-art performance on nuScenes, reducing MAE by 34.0%, 29.9%, and 29.9% over the previous best at 0--50, 0--70, and 0--80m, while attaining the lowest single-frame latency (26.8ms). A further ablation shows that out-of-scan feature blending adds no accuracy on top of RMS, providing empirical validation that in-scan selection can replace out-of-scan fusion.

Multimodal sensor fusion has demonstrated remarkable performance improvements over unimodal approaches in 3D object detection for autonomous vehicles. Typically, existing methods transform multimodal data from independent sensors, such as camera and LiDAR, into a unified bird's-eye view (BEV) representation for fusion. Although effective in ideal conditions, this strategy suffers from substantial performance deterioration when camera or LiDAR data are missing, corrupted, or noisy. To address this vulnerability, we develop a framework-agnostic fusion module for camera and LiDAR data that allows for handling cases when one of the two modalities is missing or corrupted. To demonstrate the effectiveness of our module, we instantiate it in BEVFusion [1], a well-established framework to combine camera and LiDAR data for 3D object detection. By means of quantitative experiments on the MultiCorrupt dataset, we demonstrate that our module achieves favorable performance improvements under scenarios of missing and corrupted modalities, substantially outperforming existing unified representation approaches across a wide range of sensor deterioration scenarios and reaching state-of-the-art performance in scenarios of corrupted modality due to extreme weather conditions and sensor failure.

High Dynamic Range (HDR) generation remains challenging for generative models, which are largely limited to low dynamic range outputs. Recent diffusionbased approaches approximate HDR by generating multiple exposure-conditioned samples, incurring high computational cost and structural inconsistencies across exposures. We propose LatentHDR, a framework that decouples scene generation from exposure modeling in latent space. A pretrained diffusion backbone produces a single coherent scene representation, while a lightweight conditional latent to-latent head deterministically maps it to exposure-specific representations. This enables the generation of a dense, structurally consistent exposure stack in a single pass. This design eliminates multi-pass diffusion, ensures cross-exposure alignment, and enables scalable HDR synthesis. LatentHDR supports both textand image-conditioned HDR generation for perspective and panoramic scenes. Experiments on synthetic data and the SI-HDR benchmark show that LatentHDR achieves state-of-the-art dynamic range with competitive perceptual quality, while reducing computation by an order of magnitude. Our results demonstrate that high-quality HDR generation can be achieved through structured latent modeling, challenging the need for stochastic multi-exposure generation.

Representation autoencoders that reuse frozen pretrained vision encoders as visual tokenizers have achieved strong reconstruction and generation quality. However, existing methods universally extract features from only the last encoder layer, discarding the rich hierarchical information distributed across intermediate layers. We show that low-level visual details survive in the last layer merely as attenuated residuals after multiple layers of semantic abstraction, and that explicitly fusing multi-layer features can substantially recover this lost information. We propose DRoRAE (Depth-Routed Representation AutoEncoder), a lightweight fusion module that adaptively aggregates all encoder layers via energy-constrained routing and incremental correction, producing an enriched latent compatible with a frozen pretrained decoder. A three-phase decoupled training strategy first learns the fusion under the implicit distributional constraint of the frozen decoder, then fine-tunes the decoder to fully exploit the enriched representation. On ImageNet-256, DRoRAE reduces rFID from 0.57 to 0.29 and improves generation FID from 1.74 to 1.65 (with AutoGuidance), with gains also transferring to text-to-image synthesis. Furthermore, we uncover a log-linear scaling law ($R^2{=}0.86$) between fusion capacity and reconstruction quality, identifying \textit{representation richness} as a new, predictably scalable dimension for visual tokenizers analogous to vocabulary size in NLP.

The multimodal fusion of images and scene captions has been extensively explored and applied in various fields. However, when dealing with complex remote sensing (RS) scenes, existing studies have predominantly concentrated on architectural optimizations for integrating textual semantic information with visual features, while largely neglecting the generation of high-quality RS captions and the investigation of their effectiveness in multimodal semantic fusion.In this context, we propose the Dynamic MLLM Mixture-of-Experts Perception-Guided Remote Sensing Scene Segmentation, referred to as MPerS.We design multiple prompts for MLLMs to generate high-quality RS captions, enabling MLLMs to perceive RS scenes from diverse expert perspectives. DINOv3 is employed to extract dense visual representations of land-covers.We design a Dynamic MixExperts module that adaptively integrates the most effective textual semantics. Linguistic Query Guided Attention is constructed to utilize textual semantic information to guide visual features for precise segmentation. The MLLMs include LLaVA, ChatGPT, and Qwen. Our method achieves superior performance on three public semantic segmentation RS datasets.

Existing imitation learning methods enable robots to interact autonomously with the physical environment. However, contact-rich manipulation tasks remain a significant challenge due to complex contact dynamics that demand high-precision force feedback and control. Although recent efforts have attempted to integrate force/torque sensing into policies, how to build a simple yet effective framework that achieves robust generalization under multimodal observations remains an open question. In this paper, we propose ForceFlow, a force-aware reactive framework built upon flow matching. For contact-stage policy design, we investigate force signal fusion mechanisms and adopt an asymmetric multimodal fusion architecture that treats force as a global regulatory signal, combined with a joint prediction paradigm that enhances the policy's understanding of instantaneous force and historical information, thereby achieving deep coupling between force and motion. For task-level hierarchical decomposition, we divide manipulation into a vision-dominant approach stage (VLM-based pointing for target localization) and a touch-dominant interaction stage (force-driven contact execution), with a Vision-to-Force (V2F) handover mechanism that explicitly decouples spatial generalization from contact regulation. Experimental results across six real-world contact-rich tasks demonstrate that ForceFlow achieves a 37% success rate improvement over the strong baseline ForceVLA while maintaining significantly lower cost. Moreover, ForceFlow exhibits accurate force signal prediction and demonstrates superior performance in contact force self-regulation and zero-shot out-of-distribution (OOD) generalization.

Long-tailed distributions in class-imbalanced data present a fundamental challenge for deep learning models, which tend to be biased toward majority classes. While recent methods for long-tailed recognition have mitigated this issue, they are largely restricted to single-modal inputs and cannot fully exploit complementary information from diverse data sources. In this work, we introduce a new framework for long-tailed recognition that explicitly handles multi-modal inputs. Our approach extends multi-expert architectures to the multi-modal setting by fusing heterogeneous data into a unified representation while leveraging modality-specific networks to estimate the informativeness of each modality. These confidence-guided weights dynamically modulate the fusion process, ensuring that more informative modalities contribute more strongly to the final decision. To further enhance performance, we design specialized training and test procedures that accommodate diverse modality combinations, including images and tabular data. Extensive experiments on benchmark and real-world datasets demonstrate that the proposed approach not only effectively integrates multi-modal information but also outperforms existing methods in handling long-tailed, class-imbalanced scenarios, highlighting its robustness and generalization capability.

Polarimetric imaging captures surface polarization characteristics, such as the Degree of Linear Polarization (DoLP) and the Angle of Polarization (AoP). In mainstream Division of-Focal-Plane (DoFP) color polarization imaging, recovering polarization parameters from captured mosaic arrays remains a challenging inverse problem. Existing DoFP cameras also face hardware bottlenecks and often cannot support high-frame-rate acquisition, limiting polarimetric imaging in dynamic video tasks. These limitations motivate joint spatial and temporal enhancement. To this end, we propose the first space-time polarization video reconstruction architecture. The method jointly models polarization directions in space and time and uses a polarization-aware implicit neural representation for continuous, high-fidelity upsampling. By analyzing temporal variations in polarization parameters, we further introduce a flow-guided polarization variation loss to supervise polarization dynamics. We also establish the first large-scale color DoFP polarization video benchmark to support this research direction. Extensive experiments on this benchmark demonstrate the effectiveness of the method.

With the advancement of autonomous driving, numerous annotated multi-modality datasets have become available. This presents an opportunity to develop domain-adaptive 3D object detectors for new environments without relying on labor-intensive manual annotations. However, traditional domain adaptation methods typically focus on a single source domain or a single modality, limiting their effectiveness in multi-source, multi-modality scenarios. In this paper, we propose a novel framework for multi-source, multi-modality unsupervised domain adaptation in 3D object detection for autonomous driving. Given multiple labeled source domains and one unlabeled target domain, our framework first introduces hierarchical spatially-conditioned (HSC) domain classifiers, which jointly align features from both camera and LiDAR modalities at two distinct levels for each source-target domain pair. To effectively leverage information from multiple source domains, we construct a prototype graph between each pair of domains. Based on this, we develop a prototype graph weighted (PGW) multi-source fusion strategy to aggregate predictions from multiple source detection heads. Experimental results on three widely used 3D object detection datasets - Waymo, nuScenes, and Lyft - demonstrate that our proposed framework effectively integrates information across both modalities and source domains, consistently outperforming state-of-the-art methods.

Software vulnerability detection plays a critical role in ensuring system security, where real-world auditing requires not only determining whether a function is vulnerable but also pinpointing the specific lines responsible. However, existing approaches either rely on a single information source -- sequential, structural, or semantic -- failing to jointly exploit the complementary strengths across modalities, or treat statement-level localization merely as a byproduct of function-level detection without explicit line-level supervision. To address these limitations, we propose DCVD (Dual-Channel Cross-Modal Vulnerability Detection), a unified framework that performs joint function-level detection and statement-level localization. DCVD extracts control-dependency and semantic features through two parallel branches and integrates them via contrastive alignment coupled with bidirectional cross-attention, effectively bridging the cross-modal representation gap. It further introduces explicit supervision signals at both the function and statement levels, enabling collaborative optimization across the two granularities. Extensive experiments on a large-scale real-world vulnerability benchmark demonstrate that DCVD consistently outperforms state-of-the-art methods on both function-level detection and statement-level localization. Our code is available at https://github.com/vinsontang1/DCVD.

Remote sensing image fusion aims to create a high-resolution multi/hyper-spectral image from a high-resolution image with limited spectral information and a low-resolution image with abundant spectral data. Recently, deep learning (DL) techniques have shown significant effectiveness in this area. Most DL-based methods approach image fusion as a 2D problem by encoding spectral information into feature map channels. However, our research suggests that this strategy introduces notable spectral distortions. In contrast, some methods consider spectral data as an additional dimension, utilizing standard 3D convolutions to preserve spectral information. Nevertheless, in a standard 3D convolutional layer, the same set of kernels is applied across all input regions, which we have found to be sub-optimal for image fusion. Furthermore, standard 3D convolutions necessitate substantial computational resources. To address these challenges, we propose a novel convolutional paradigm called Adaptive 3D Convolution (Ada3D) for remote sensing image fusion. Ada3D applies a unique set of 3D kernels to each input voxel, enabling the capture of fine-grained details. These adaptive kernels are generated through a two-step process: (i) spatial and spectral kernels are derived from their respective image sources; (ii) these two types of kernels are then combined to form content-aware 3D kernels that effectively integrate spatial and spectral information. Additionally, adaptive biases are introduced to enhance the convolutional outcome at the voxel level. Furthermore, we incorporate the group convolution technique to reduce computational complexity. As a result, Ada3D offers full adaptivity in an efficient manner. Evaluation results across five datasets demonstrate that our method achieves SOTA performance, underscoring the superiority of Ada3D. The code is available at https://github.com/PSRben/Ada3D.

Post-disaster situational awareness relies heavily on understanding both the extent and the volume of floodwaters. While 2D semantic segmentation provides accurate flood masking, it lacks the vertical dimension required to assess navigability and structural risk. This paper presents a geometric "Water Surface Elevation" approach for estimating flood depth from monocular aerial imagery. Our pipeline utilizes Mask2Former, a state-of-the-art transformer-based segmentation model, to generate precise 2D flood masks. These masks are fused with Digital Elevation Models (DEMs) to identify the water-land boundary, calculate a global water surface elevation ($Z_{water}$), and compute per-pixel depth based on the principle of local hydrostatic equilibrium. We evaluate this workflow using the FloodNet and CRASAR-U-DROIDS datasets, demonstrating how high-performance segmentation can be leveraged to extract 3D volumetric data from 2D imagery without the latency of hydrodynamic simulations.

Device-free localization trains models from heterogeneous wireless and visual sensors (e.g., Wi-Fi, LiDAR) distributed across edge devices. Federated learning offers a privacy-respecting framework, but is brittle when clients differ in sensor modality and resolution, when their data distributions drift, and when privacy noise destroys the structural signal needed for localization. We propose UMEDA, a graph federated learning framework in which clients form nodes of a global graph that share a continuous integral operator, and aggregation is reformulated as spectral signal processing on this operator. Each client encodes its local sensors with a linear-attention layer whose kernel spectrum is low-rank filtered, suppressing modality-specific residuals so clients with different sensors align in a common low-rank subspace. The server then aggregates client updates via a diffusion model over the kernel's spectral coefficients, treating updates as discretizations of a shared operator rather than topology-bound weights -- this absorbs varying graph sizes and missing modalities without node-wise correspondence. To balance privacy and utility, we add an anisotropic differential-privacy mechanism that projects noise preferentially into the null space of the signal subspace, preserving dominant eigendirections while ensuring formal $(ε, δ)$-DP under gradient clipping. On MM-Fi and the RELI11D out-of-distribution benchmark, UMEDA outperforms state-of-the-art federated baselines in accuracy, convergence, and communication efficiency, particularly under high modality heterogeneity and tight privacy budgets.

Video-language models (VLMs) face rapid inference costs as visual token counts scale with video length. For example, 32 frames at $448{\times}448$ resolution already yield >8,000 visual tokens in Qwen3-VL, making LLM prefill the dominant throughput bottleneck. Existing methods often rely on global similarity or attention-guided compression, incurring offsets to their gains. We propose \textbf{Temporal Token Fusion (TTF)}, a training-free, plug-and-play pre-LLM token compression framework that exploits structured temporal redundancy in video. TTF automatically selects an anchor frame, then for each subsequent frame, performs a local window similarity search (e.g.,$3\times 3$), fusing tokens that exceed a threshold. The compressed sequence maintains positional consistency across both prefill and decoding through coordinate realignment, enabling seamless integration with existing VLM pipelines. On Qwen3-VL-8B with threshold t=0.70, TTF removes about 67% of visual tokens while retaining 99.5% of the baseline accuracy and introducing only ${\approx}0.16$,GFLOPs of matching overhead. Overall, TTF offers a practical, efficient solution for video understanding. The code is available at \href{https://github.com/Cominder/ttf}{https://github.com/Cominder/ttf}

Urban spatial evolution is manifested not only through horizontal expansion but also through vertical structural changes. Consequently, jointly capturing 2D semantic changes and 3D height changes is essential for urban morphology analysis and emergency management. In practical scenarios, collecting 3D observations is often constrained by high acquisition costs and the inability to support frequent updates. The multi-temporal cross-modal input consisting of pre-event Digital Surface Model (DSM) and post-event imagery provides a practical solution for 3D change detection in high-frequency urban monitoring, disaster assessment, and emergency response scenarios. However, this setting remains challenging as imagery and DSM data exhibit significant spectral-geometric representation gaps. Moreover, modality differences may be confused with actual changes, and robust change detection requires effective fusion of semantic and geometric features from multi-temporal data. In this paper, we propose DPG-CD, a depth-prior-guided multi-temporal cross-modal fusion framework for joint 2D semantic and 3D height change detection. Specifically, an estimated depth prior is introduced into the imagery to mitigate the modality gap with DSM. A gated fusion mechanism then selectively injects geometric cues from depth prior while preserving discriminative spectral representations. Subsequently, a multi-stage cross-temporal cross-modal feature fusion architecture is employed to extract change-aware features. Finally, a multi-task decoder jointly predicts 2D semantic changes and 3D height changes, complemented by an auxiliary DSM prediction task to improve structural consistency and height estimation accuracy. Experiments on two public datasets, Hi-BCD and 3DCD, and a new dataset, NYC-MMCD, demonstrate that DPG-CD outperforms state-of-the-art methods on both 2D and 3D change detection tasks.

Infrared-Visible image fusion (IVIF) aims to integrate thermal information and detailed spatial structures into a single fused image to enhance perception. However, existing evaluation approaches tend to over-optimize both hand-crafted no-reference statistics and full-reference metrics that treat the source images as pseudo ground truths. Recent IVIF reward-modelling efforts learn from human ratings but use scalar regression on aggregated scores, neither leveraging the reasoning of Multimodal Large Language Models (MLLMs) nor encoding per-image perceptual ambiguity in their supervision, but naively introducing MLLMs with discrete one-hot supervision likewise collapses fused images of similar quality into different rating levels. To address this, we introduce FuScore, which utilizes an MLLM to mimic human visual perception by producing continuous quality score, rather than discrete level predictions, enabling fine-grained discrimination among fused images of similar quality. We exploit the agreement among four IVIF-specific sub-dimensions to construct a per-image soft label whose sharpness reflects how consensual the overall judgment is. We further introduce a tripartite objective combining per-image distributional supervision, within-source-pair Thurstone fidelity for method-level ordering, and cross-source-pair Thurstone fidelity for scene-level ordering across scenes. Extensive experiments demonstrate that FuScore achieves state-of-the-art correlation with human visual preferences.

Subseasonal-to-seasonal (S2S) temperature forecasts, spanning several weeks to a few months, are critically needed in agriculture practice, energy planning, and extreme-weather induced risk management, yet their reliability varies substantially across seasons and regions. Forecast skill is often attributed primarily to lead time, but this perspective does not fully explain the spatiotemporal patterns of predictability. Here we show that S2S predictability is organized across interacting temporal components, spatial heterogeneity, and large-scale pattern coherence, and that this structure can be explicitly characterized and exploited. We develop a dual-scale learning framework that separates calendar-aligned historical climate context from lead-time matched recent weather evolution, combining them through spatially adaptive fusion to enable stable temperature forecasts across the 30 to 90-day window. The learned fusion weights reveal that the balance between these two temporal scales shifts systematically with season and geography: during winter, interannual context dominates over high latitudes and complex terrain where forecast is the most difficult, while summer predictions reflect a more balanced temporal contribution across the domain. This spatially explicit reorganization of predictability, rather than simple lead-time decay, emerges as the primary determinant of forecast skill within the subseasonal window. Topology-aware structural constraints further improve spatial coherence of predicted temperature fields, stabilizing large-scale pattern organization particularly over complex terrain. These results reframe S2S predictability as a structured, multi-scale phenomenon, providing a more interpretable foundation for improving forecast systems and informing their use in practice.

As a key technique in multi-modal processing, infrared and visible image fusion (IVIF) plays a crucial role in integrating complementary spectral information for visual enhancement and downstream vision tasks. Despite remarkable progress, existing methods struggle to flexibly accommodate heterogeneous demands. Achieving adaptive fusion that aligns with various preferences from both human and machine vision remains an open and challenging problem. To address this challenge, we propose DPOFusion, a direct preference optimization (DPO) framework integrating the property-aligned latent diffusion model (PALDM) and the preference-controllable latent diffusion model (PCLDM), enabling task-guided, preference-adaptive IVIF for both human and machine vision. The PALDM leverages a latent fusion prior and a joint conditional loss to generate diverse candidate fusion results with various properties. PCLDM is subsequently fine-tuned via instance direct preference optimization (IDPO), enabling direct control of the final fusion results with heterogeneous preference signals. Experimental results demonstrate that our framework not only attains precise preference alignment among humans, vision-language models, and task-driven networks, but also sets a new benchmark for adaptive fusion quality and task-oriented transferability.

Purely RGB-based vision models often fail to provide reliable cues in challenging scenarios such as nighttime and fog, leading to degraded performance and safety risks. Infrared imaging captures heat-emitting sources and provides critical complementary information, but existing high-fidelity fusion methods suffer from prohibitive latency, rendering them impractical for real-time edge deployment. To address this, we propose FusionProxy, a real-time image fusion module designed as a fully independent, plug-and-play component with diffusion level quality. FusionProxy exploits two complementary statistics of a teacher sample ensemble: per-pixel variance in raw image space, used to weight pixel-level supervision, and per-pixel variance inside frozen foundation backbones, used to route feature-level alignment spatially. Once trained, FusionProxy can be directly integrated into any visual perception system without joint optimization. Extensive experiments demonstrate that our method achieves superior performance on static recognition tasks and significantly enhances robustness in dynamic tasks, including closed-loop autonomous driving. Crucially, FusionProxy achieves real-time inference speeds on diverse platforms, from high-end GPUs to commodity hardware, providing a flexible and generalizable solution for all-day perception.

The condition monitoring (CM) of synthetic fibre ropes (SFRs) used in offshore, maritime, and industrial settings demands more than a classifier: inspectors need continuous severity estimates, maintenance recommendations, anomaly flags, deterioration timelines, and automated reports, all from a single inspection image. We present DART (Damage Assessment via Rope Transformer), a vision-language foundation model that addresses the full rope inspection workflow through a unified multi-task architecture. DART extends the Joint-Embedding Predictive Architecture (JEPA) to the cross-modal domain by coupling a Vision Transformer (ViT-H/14) with Llama-3.2-3B-Instruct via a Severity-Conditioned Cross-Modal Fusion (SC-CMF) module. Three architectural innovations drive the model's versatility: (1) HD-MASK, a saliency-guided masking strategy that focuses self-supervised reconstruction on damage-dense patches; (2) per-class learnable severity gates that adaptively weight language grounding by damage category; and (3) a Contrastive Damage Disentanglement (CDD) loss that shapes the embedding space to simultaneously encode damage type, severity ordering, and cross-modal semantics. Trained once on 4,270 images spanning 14 fine-grained rope damage classes, the frozen DART backbone supports downstream tasks without any task-specific fine-tuning: damage classification (93.22 % accuracy, 91.04 % macro-F1, +38.5 pp over a vision-only baseline), continuous severity regression (Spearman rho = 0.94, within-1-ordinal accuracy 99.6 %), few-shot recognition (89.2 % macro-F1 at 20 shots). These results demonstrate that DART functions as a general-purpose CM backbone that goes well beyond classification, providing actionable inspection intelligence from a single shared representation.

Light field (LF) image super-resolution benefits from Epipolar Plane Images (EPIs), whose line slopes explicitly encode disparity. However, existing Transformer-based LF SR methods mainly attend to horizontal and vertical EPIs, leaving diagonal epipolar geometry underexplored. We present GTF, an omnidirectional EPI Transformer that explicitly models horizontal, vertical, 45-degree, and 135-degree EPIs within a unified reconstruction framework. GTF combines directional EPI processing, MacPI-based prior injection, adaptive directional fusion, and a topology-preserving feed-forward network to better exploit LF geometry. For the NTIRE 2026 fidelity tracks, we use GTF as the main model, while a lightweight GTF-Tiny variant targets the efficiency track. On five standard LF SR benchmarks covering both real-captured and synthetic scenes, GTF reaches 32.78 dB without inference-time enhancement, and stronger inference settings with EPSW and test-time augmentation further improve performance. Under the NTIRE 2026 efficiency constraint, GTF-Tiny attains 32.57 dB with only 0.915M parameters and 19.81 GFLOPs. In the NTIRE 2026 Light Field Image Super-Resolution Challenge, our submissions rank 3rd on Track 1 and Track 3 and 4th on Track 2. Architecture-evolution, channel-width, and inference analyses further support the effectiveness of diagonal EPI modeling, directional fusion, and the lightweight design.

Automatic brain tumor segmentation from multi-modal MRI remains challenging because volumetric models often incur substantial computational cost. This paper presents DALight-3D, a compact 3D U-Net variant that combines depthwise separable 3D convolutions, identifier-conditioned normalization, cross-slice attention, and adaptive skip fusion. The method is evaluated on the Medical Segmentation Decathlon Task01 BrainTumour benchmark under matched optimization settings against standard 3D U-Net, Attention U-Net, Residual 3D U-Net, and V-Net baselines. In the reported 50-epoch comparison, DALight-3D achieves a mean Dice of 0.727 with 2.22M parameters, compared with 0.710 Dice and 3.20M parameters for Residual 3D U-Net. Component-wise ablations show consistent performance degradation when SepConv, identifier-conditioned normalization, CSA, or SSFB is removed. These results indicate that DALight-3D offers a favorable accuracy-efficiency trade-off within the present benchmark setting.

Audio-Visual Intelligence (AVI) has emerged as a central frontier in artificial intelligence, bridging auditory and visual modalities to enable machines that can perceive, generate, and interact in the multimodal real world. In the era of large foundation models, joint modeling of audio and vision has become increasingly crucial, i.e., not only for understanding but also for controllable generation and reasoning across dynamic, temporally grounded signals. Recent advances, such as Meta MovieGen and Google Veo-3, highlight the growing industrial and academic focus on unified audio-vision architectures that learn from massive multimodal data. However, despite rapid progress, the literature remains fragmented, spanning diverse tasks, inconsistent taxonomies, and heterogeneous evaluation practices that impede systematic comparison and knowledge integration. This survey provides the first comprehensive review of AVI through the lens of large foundation models. We establish a unified taxonomy covering the broad landscape of AVI tasks, ranging from understanding (e.g., speech recognition, sound localization) to generation (e.g., audio-driven video synthesis, video-to-audio) and interaction (e.g., dialogue, embodied, or agentic interfaces). We synthesize methodological foundations, including modality tokenization, cross-modal fusion, autoregressive and diffusion-based generation, large-scale pretraining, instruction alignment, and preference optimization. Furthermore, we curate representative datasets, benchmarks, and evaluation metrics, offering a structured comparison across task families and identifying open challenges in synchronization, spatial reasoning, controllability, and safety. By consolidating this rapidly expanding field into a coherent framework, this survey aims to serve as a foundational reference for future research on large-scale AVI.

Multimodal visual object tracking can be divided into to several kinds of tasks (e.g. RGB and RGB+X tracking), based on the input modality. Existing methods often train separate models for each modality or rely on pretrained models to adapt to new modalities, which limits efficiency, scalability, and usability. Thus, we introduce OneTrackerV2, a unified multi-modal tracking framework that enables end-to-end training for any modality. We propose Meta Merger to embed multi-modal information into a unified space, allowing flexible modality fusion and robustness. We further introduce Dual Mixture-of-Experts (DMoE): T-MoE models spatio-temporal relations for tracking, while M-MoE embeds multi-modal knowledge, disentangling cross-modal dependencies and reducing feature conflicts. With a shared architecture, unified parameters, and a single end-to-end training, OneTrackerV2 achieves state-of-the-art performance across five RGB and RGB+X tracking tasks and 12 benchmarks, while maintaining high inference efficiency. Notably, even after model compression, OneTrackerV2 retains strong performance. Moreover, OneTrackerV2 demonstrates remarkable robustness under modality-missing scenarios.

To address module fragmentation, uninterpretable mappings, and deployment constraints in RAW-domain demosaicing, color correction, and detail enhancement, this paper proposes RPBA-Net, an interpretable residual pyramid bilateral affine network for RAW-domain ISP enhancement. Given packed RAW as input, the method performs residual affine base reconstruction by estimating a base RGB representation and learning identity-guided residual affine corrections, thereby unifying demosaicing and enhancement. It further builds pyramid bilateral affine grids and combines guide-driven autoregressive adaptive slicing with adaptive cross-layer fusion to hierarchically model global tone restoration and local texture enhancement. In addition, smoothness, cross-scale consistency, and magnitude regularization terms are introduced to improve model stability, controllability, and structural interpretability. Extensive experiments demonstrate that RPBA-Net surpasses representative RAW-to-sRGB methods and achieves state-of-the-art performance in reconstruction fidelity and perceptual quality, while maintaining low model complexity and strong deployment potential for mobile and embedded platforms.

Accurate badminton stroke prediction is crucial for fine-grained sports analysis and tactical decision support. However, existing methods struggle to model rich temporal context. This paper introduces TemPose-TF-ASF (Adjacent-Stroke Fusion), a context-aware extension of TemPose. It enhances stroke recognition by incorporating stroke-type information from both preceding and subsequent strokes. A two-stage training and inference strategy is adopted. Preliminary predictions from the baseline model are reused as estimated temporal context. These predictions guide the joint optimization of the ASF module and the classifier. By explicitly modeling bidirectional temporal stroke dependencies, the proposed method can be seamlessly integrated into existing state-of-the-art models. Experiments on a large-scale badminton match dataset show consistent improvements over the baseline and its variants in terms of Accuracy and Macro-F1. Moreover, integrating ASF into other advanced methods yields notable performance gains. These results demonstrate strong transferability and generalization capability.

Chest X-ray classification suffers from severe class imbalance where gradient updates bias toward majority classes, causing feature drift and poor performance on rare but critical pathologies. We propose a Momentum-Anchored Multi-Scale Fusion Network that uses exponential moving averages (EMA) as a temporal anchoring mechanism to stabilize feature representations under long-tailed distributions. Our approach applies selective momentum updates to the final expansion block of an EfficientNet backbone, creating a slowly-evolving reference branch that resists gradient-induced drift while preserving discriminative patterns for minority classes. Combined with multi-scale spatial fusion ($1\times 1$, $3 \times 3$, $5 \times 5$ convolutions), this anchoring strategy maintains representational stability throughout training. On ChestX-ray14, our method achieves 0.8682 average AUC, outperforming state-of-the-art approaches and showing particular improvements on rare pathologies like Hernia (0.9470) and Pneumonia (0.8165). The results demonstrate that momentum anchoring effectively counters feature instability in long-tailed medical image classification.