Aerial Robots

Language-guided navigation for terrestrial-aerial bimodal robots requires selecting routes and locomotion modes that match scene context and task intent. Generated videos can represent such motion sequences, but recovering metrically consistent navigation references from them is challenging because of scale ambiguity and axis-dependent geometric distortions. We present TADreamer, a zero-shot framework that grounds video-imagined navigation in measured geometry without task-specific training or fine-tuning. A vision-language model translates onboard observations and instructions into navigation prompts, selects valid generated videos, and provides corrective feedback when regeneration is needed. The selected video is reconstructed into 3D waypoints annotated with terrestrial or aerial modes. A two-stage calibration procedure uses field-of-view constraints to initialize scale estimation, then refines axis-dependent scales, rotation, and translation by registering the reconstructed point cloud to measured geometry. The calibrated waypoints and mode labels guide a planner that incorporates measured geometry for robot execution. Real-world experiments demonstrate navigation across seven indoor and outdoor scenarios. With five candidates per round, usable videos are obtained within two rounds in all seven scenarios. On the calibration observations, our method reduces mean absolute depth error by 87.7% and mean absolute relative depth error by 86.3% compared with NavDreamer.

Multi-agent heterogeneous air-ground robot teams are attractive for open world search, with applications for reconnaissance, urban search and rescue missions (USAR), disaster response and recovery, and hazardous environments. These two platforms have different failure modes: aerial robots cover ground quickly but cannot resolve small or occluded targets from altitude, while ground robots can identify objects-of-interest, such as people or hazardous objects, at close range but cover less area. Existing language-tasked teams either have roles fixed prior, or have a language model assign them from hand-written capability tags, so the team is unable to know when within a mission an asset is no longer useful. We present HEROIC, a decentralized heterogeneous multi-agent open-vocabulary search coordination framework that requires agents to communicate in natural language only. HEROIC's initial agent role assignment is derived from sensor properties and a scale law to determine whether targets can be detected with a high confidence. From the mission's natural language prompt alone, this law assigns aerial flight altitudes and sweep spacing. When this calculated height falls below the altitude for safe flight, aerial agents re-task themselves from searcher to aerial triage, escort, and route guide for ground agents. Both robots maintain an evidential belief over the search area (bearing rays for positive evidence, a log-odds posterior for negative evidence) and gate any arrival on close-range verification. In full-stack experiments, HEROIC reaches the target 84% of the time across all 6 scenes, compares to 35-54% for vision-language frontier baselines, frontier-based search, lawnmower, and random-walk running the same perception, all while being 2-4x sooner to arrive at the target.

In recent years, aerial manipulation has attracted increasing attention as a key to expand the application of aerial robots. In this work, we focus on two major research directions for achieving versatile aerial manipulation: (i) acquiring high environmental adaptability using soft manipulators, and (ii) expanding the feasible wrench space by distributing thrusters along the manipulator. However, no aerial robot has simultaneously satisfied these two requirements. Therefore, in this paper, we propose a morphing rotor-distributed aerial robot with flexible continuum links that achieves both high shape adaptability and an expanded wrench space. The flexible continuum links function as soft manipulators, passively conforming to the shape of the environment, while the thrusters distributed along the continuum links expand the feasible thrust wrench space and enable the end-effector to exert large interaction forces. To realize the proposed robot, it is essential to suppress vibrations of the lightweight continuum links. Thus, we develop a composite leaf-spring structure that provides both high torsional and vertical stiffness, and vibration-suppressing control methods. Using these implementations, we demonstrate stable flight and a variety of aerial manipulation tasks. To the best of our knowledge, this is the first work to realize aerial manipulations using flexible links with an integrated thruster.

Multi-Unmanned Aerial Vehicle (UAV) disaster-response systems require coordinated task assignment and local trajectory control, yet the individual and combined contributions of these coordination layers to mission efficiency and operational safety remain insufficiently characterised under controlled experimental conditions. TriSAR is evaluated as a five-UAV coordination system operating in a physics-based Gazebo simulation of an earthquake-damaged urban environment. A 2 x 2 factorial design compares two task-allocation strategies (Genetic Algorithm and greedy fitness-based allocation) with reactive collision avoidance enabled or disabled. Each of the four configurations was evaluated over 30 stochastic episodes in a common scenario of five UAVs and eight targets. Under greedy allocation, enabling repulsion eliminated recorded collision-threshold violations, confirmed by a Mann-Whitney test (U = 885, p = 4.03 x 10^-12, rank-biserial r = 0.97). Under GA allocation, the same protective effect was confirmed (U = 675, p = 1.26 x 10^-5, rank-biserial r = 0.50). For mission-efficiency metrics, GA-based allocation showed no statistically detectable advantage over greedy allocation when repulsion was enabled, but a significant advantage in steps, path length, and energy when repulsion was disabled (Welch's t-tests, |g| between 0.92 and 1.76). These results show that reactive repulsion provides a substantial, allocation-dependent safety benefit, while the additional computational complexity of GA-based task allocation yields a detectable mission-efficiency benefit only when repulsion is disabled.

Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such a high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel "smart" end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment. In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.

The development and testing of advanced aerial robots require experiments in controlled environments with tailored airflow profiles. This paper presents an online learning algorithm for controlling the complex airflow field in a multi-fan vertical wind tunnel. Our method combines a simplified physical model with iterative, measurement-based learning, enabling sample-efficient convergence to desired airflow distributions. We demonstrate the method's versatility by generating complex airflow, such as uniform, Gaussian, and parabolic profiles. Crucially, we show that our algorithm can produce an airflow profile specifically designed for passive soaring, greatly enhancing flight performance of a soaring robot. Variability, practical utility, and robustness of our approach are further highlighted by successful operation with a varying number of fans.

Multi-link aerial robots can actively deform their articulated structures during flight, giving them strong potential for aerial manipulation. However, they still face substantial challenges in contact-rich aerial manipulation tasks such as surface sliding, which requires both disturbance robustness and compliance to uncertain surface geometry. Force-control strategies such as impedance and admittance control are commonly employed to address these requirements. Although impedance control can provide disturbance-resistant interaction and admittance control can offer compliant adaptation, their opposite force--motion causalities prevent their simultaneous implementation when applied through the same actuation source, such as the rotor thrusts used by conventional aerial robots. To overcome this limitation, we propose a hybrid impedance--admittance control strategy for a multi-link aerial robot. The articulated morphology enables a functional separation of force and motion regulation across joint and rotor actuation sources. In this framework, admittance behavior is generated through joint angle regulation to enhance adaptive interaction, while impedance behavior is achieved by modulating rotor thrust to regulate the sliding motion. This structural coordination allows the robot to leverage the complementary strengths of both control paradigms. As a result, the multi-link aerial robot achieves resilient and adaptive surface sliding. Experimental results demonstrate robust and compliant sliding performance on unknown surfaces.

Maintaining a stable pose during physical interaction is a significant challenge for aerial robots, often limiting their use in contact-based tasks. This paper presents a novel uncrewed aerial vehicle (UAV) platform designed to transition from unconstrained flight to a stable, constrained work platform via environmental anchoring. Our system comprises: 1) a multirotor with a tilt-rotor mechanism that decouples pitch from forward motion, enabling stable hover at non-zero pitch angles, and 2) a novel underactuated, cable-driven, prismatic gripper featuring compliance to adapt to irregular geometries, designed to stabilize the UAV by anchoring it to its environment. We present the design and prototyping of the complete system and validate its performance through a series of real-robot flight tests. Results demonstrate that anchoring significantly improves stability for interaction tasks, reducing positional drift RMSE by over 95% compared to a free-flight baseline, even under windy conditions. The anchored system can withstand longitudinal reaction forces up to 75N while maintaining a stable pose. Furthermore, across a range of target geometries and orientations, the system demonstrated consistent stability with a positional drift RMSE that never exceeded 3mm. These results establish the viability of our approach for complex physical interaction tasks, such as sampling tree health by drilling or sensor installation in hard-to-reach locations. Watch our UAV at: https://youtu.be/HDQ8S4ZW3Ls

Aerial robots generate structured aeroacoustic fields during flight, yet these signals have been underexplored as a source of onboard relative perception, particularly under the strong ego-acoustic interference generated during simultaneous flight in various outdoor conditions. We introduce embodied passive aeroacoustic perception, a sensing paradigm in which an aerial robot infers actionable relative-state information from the naturally generated sound of flight while operating within its own evolving aeroacoustic field. We present SonicFly, a passive aeroacoustic perception framework that enables one unmanned aerial vehicle to estimate and follow another using only the leader's intrinsic flight sound, without active acoustic signaling, inter-robot communication, GPS sharing, or external sensing infrastructure. The system uses a lightweight four-microphone array, rotorcraft-informed acoustic representations, a neural bearing-range estimator, and confidence-gated filtering for closed-loop flight. Through acoustic characterization, onboard localization, and outdoor pursuit experiments, we show that multirotor aeroacoustic signals contain sufficient information to support relative perception despite strong ego-acoustic interference, environmental variability, and changing flight geometry. During acoustic-only pursuit, SonicFly achieved a mean distance-maintenance error of 1.34 m across diverse outdoor trajectories and operating conditions. Analysis of the acoustic channel reveals design principles governing embodied passive aeroacoustic perception, including the roles of harmonic structure, spectral separability, and spatial acoustic cues in determining observability. Our results establish the feasibility of embodied passive aeroacoustic perception for aerial robots and suggest that naturally generated behavioral signals can serve as information for robotic perception and coordination.

Generating safe corridors is essential for collision-free robotic motion planning, yet most existing methods rely on predefined reference paths, which bias corridor geometry and implicitly limit the homotopy classes that can be explored. We propose a reference-path-free corridor generation framework on graphs of convex sets (GCS) that constructs corridors directly as sequences of convex sets, allowing corridor structure to emerge from the free-space representation rather than from a guiding path. To reason about similarity among corridors, we extend visibility-based deformation from paths to convex-set sequences, enabling the fusion of topologically redundant corridors while preserving distinct alternatives. To overcome the limited adaptability of existing GCS methods based on static global decompositions, we further develop an adaptive multi-scale GCS, in which a sampling-based fine-scale graph supports localized updates and a visibility-based coarse-scale graph enables compact global exploration. The two levels maintain topological consistency, allowing incremental updates without full graph reconstruction under environmental uncertainty. Numerical experiments characterize GCS construction, corridor generation, homotopy-aware exploration, and local updates, showing efficient graph construction, stable trajectory-level performance, and shorter-duration homotopy-aware trajectories than existing baselines. Hardware experiments on ground and aerial robots, including deployment with onboard localization, further validate the framework under translated and previously unknown obstacles.

Perceiving human motion and intent at long range is a prerequisite for socially intelligent aerial robots, yet the data to learn it barely exists. We introduce Drones2BodyLanguage, a dataset grounding human motion in real UAV footage: avatars manifesting ten communicative intents are placed into unmodified 4K drone scenes with metrically correct position, scale and orientation, maintained over hundreds of frames of camera motion. Enabling it is a lightweight geometric world model of the local scene - semantically selected anchors lifted to 3D through streaming monocular depth - in which a placement point is predicted as an affine anchor combination with provably rigid-invariant weights, and re-rendered under an SVD-fitted ground rotation. Across twelve architectures on scene- and motion-disjoint splits, training on placed data lifts mean intent accuracy by a wide margin for real, retargeted and generated motion alike, with gains confirmed on two in-the-wild scenes.

Autonomous free-flying robots in orbital environments require controllers that are both versatile and resource-efficient, yet maintaining a separate, task-specific policy for each mission profile is architecturally brittle and limits operational flexibility as requirements evolve. We introduce HYPER-GNC, a multi-task reinforcement learning framework in which a hypernetwork maps physics-informed task embeddings to the weights of a shared actor-critic policy, enabling a single compact controller to master four distinct GNC tasks: velocity tracking, docking, inspection, and navigation with obstacle avoidance. The continuous embedding space allows the controller to generalize to novel mission configurations at deployment time without any retraining. Extensive experiments demonstrate that HYPER-GNC achieves sample efficiency comparable to single-task specialists while maintaining stability under significant inertial perturbations and external body wrenches. We further validate the framework on a physical satellite emulator, successfully bridging the simulation-to-reality gap across all mission profiles. Code, trained models, and deployment scripts are made publicly available to support reproducibility.

Deploying navigation systems at scale requires a recipe that minimizes sensor assumptions, generalizes across robot embodiments, and trains efficiently. Yet, today's best systems depend on depth sensors, multi-camera rigs, or pre-built maps, limiting the hardware they support and increasing deployment cost. We introduce Robostral Navigate, an 8B vision-language model built around this scalability objective. The model consumes only a stream of monocular RGB images - the most ubiquitous sensor across robotic platforms and predicts waypoints by pointing to the next target location in the current camera view. Operating purely in image space, rather than robot-specific coordinates, makes the policy naturally robust to changes in camera intrinsics and scene scale, enabling deployment across wheeled, legged, and aerial robots without recalibration. We generate 2.4 million trajectories across 350k simulated scenes to reduce the reliance on real-world data collection and scale easily. We further introduce a prefix-caching training recipe that packs entire episodes into single training sequences, reducing training tokens by 22x and cutting training time from months to days. A tree-based attention mask prevents conditioning on previous ground-truth actions, encouraging visually grounded action prediction, and reinforcement learning is used to further improve exploration and recovery capabilities. On the Room-to-Room and Room-Across-Room in Continuous Environments (R2R-CE and RxR-CE) benchmarks, Robostral Navigate sets a new state of the art. On R2R-CE, it achieves a 77.4% success rate, surpassing the best monocular method by 10.5 points and the strongest depth- or multi-camera system by 5.3 points despite using only a single RGB camera. On RxR-CE, it reaches 75.1% success rate, outperforming all monocular baselines.

We present a novel and minimalistic design of an aerial-terrestrial robot DASH: Ducted Aerial Spring Hopper. The goal is to enable both aerial and ground locomotion capabilities on a unified mobile robot that is mechanically-minimalistic, locomotion-versatile, and energy-efficient. We propose an organic integration of ducted fan co-axial body with a springy leg at the bottom for realization. The ducted fan module provides thrust-vectoring as the main actuation for agile flying; when it is combined with the light-weight spring leg, the robot realizes highly efficient ground hopping with energy circulation. Moreover, to realize optimal locomotion with two modes, we employ a contact-implicit model predictive controller to automatically choose locomotion modes and actuation. We successfully validated the design and control of DASH through a range of tasks, including periodic hopping, aerial flight, and mode-free locomotion with autonomous mode transitions during obstacle traversal.

Autonomous flight of aerial robots in narrow space remains challenging due to strong aerodynamic disturbances and limited flying space. Existing approaches mainly address aerodynamic disturbances at the control level, while motion planning typically relies on geometric constraints and fixed speed limits, leading to conservative or unsafe behaviors in confined environments. This paper presents a disturbance-aware planning and control framework (DAPCF) that integrates online disturbance estimation into the planning-control loop for quadrotor flight in narrow space. First, the dual-loop observers estimate 6-degree-of-freedom disturbance forces and torques in real time based on odometry and motor speed measurements. Then, a disturbance risk function is introduced that adaptively modulates the reference speed of the planner based on disturbance estimation, reducing velocity when disturbances exceed a threshold and restoring it under low-disturbance conditions. Finally, a motor-dynamics-based nonlinear model predictive controller (MDNMPC) with disturbance compensation is designed to ensure robust trajectory tracking under perturbed conditions. Experiments demonstrate that a quadrotor with a diagonal length of 0.39m can traverse straight, sloped, and curved tunnels as narrow as 0.6m, outperforming human pilots in both success rate and flight efficiency.

Efficient exploration and target search in large-scale unknown environments remain challenging for aerial robots due to the demands of broad spatial coverage, fine-grained perception, and real-time decision-making. This paper presents SLIDER, a lightweight and memory-efficient framework that avoids reliance on globally dense maps by combining a local sliding map with sparse global history information. A novel observation quality evaluation method is proposed, leveraging historical poses and sensor models to assess point cloud data in real-time, enabling efficient frontier detection. To support scalable and responsive planning, an incremental viewpoint clustering strategy dynamically adapts to local updates, significantly reducing the number of candidate targets and decreasing computational load. A sparse global topological map is incrementally maintained to assist global planning and cost evaluation. Extensive simulations and real-world experiments demonstrate that the proposed system outperforms state-of-the-art methods in memory usage, decision latency, and search efficiency.

The scalability of organic agriculture is partially limited by the labor costs associated with monitoring for pests. While drones and rovers are well-suited for agricultural monitoring from above or next to plants, many pests live on the underside of leaves or on plant stems, making them detectable only after they have caused significant damage. To enable early pest detection we present STEMbot, a miniature climbing robot system designed for autonomous navigation under plant canopies. Unlike existing climbing platforms that lack on-board perception or are restricted to unbranched vertical trunks, STEMbot integrates a fully geometric PIN-SLAM pipeline with a semantic OcTree to achieve robust localization and mapping while climbing the plant. To plan STEMbot's motion we propose a manifold-constrained A* planner along with ray-tracing goal specification to enable branch-aware traversal and the inspection of occluded targets. We validate our system through hardware experiments, demonstrating reliable traversal of stems ranging from 7-33mm and autonomous navigation across four distinct plant specimens. Quantitative evaluations show that our system achieves high-fidelity geometric reconstructions with an average Chamfer distance of less than 1cm relative to an offline photogrammetry baseline, confirming that STEMbot maintains the globally consistent odometry needed for autonomous navigation.

This paper presents QuadRocket, a quadrotor-based rocket prototype that provides a low-cost, low-risk platform for validating advanced thrust-vector control strategies for launch vehicle-type systems. The prototype consists of a cylindrical main body mounted on top of a quadrotor through a universal joint, forming a flying inverted pendulum with non-negligible inertia. For control design, the coupled system is modeled as a single axisymmetric rigid body actuated by a vectored force applied along its longitudinal axis. A reduced-attitude representation on the two sphere is adopted to explicitly exploit the vehicle's axial symmetry and to decouple yaw from the thrust-vector direction. On this model, we derive an adaptive backstepping controller that achieves almost global trajectory tracking in the presence of unknown constant disturbances, while a control-point transformation mitigates non minimum-phase behavior. The quadrotor is then treated as a thrust vector actuator, and a dynamic-surface-based attitude controller is designed to track the desired thrust-vector, accounting for actuation dynamics and avoiding explicit differentiation of virtual control signals. The complete architecture is evaluated in simulation and validated experimentally in an indoor motion-capture arena. Results demonstrate accurate trajectory tracking, effective disturbance compensation, and confirm the suitability of the QuadRocket as a versatile testbed for thrust-vector-controlled robotic vehicles.

This letter presents the first method for autonomous exploration of unknown cavities in three dimensions (3D) that focuses on minimizing the distance traveled and the length of tether unwound. Considering that the tether entanglements are little influenced by the global path, our approach employs a 2-level hierarchical architecture. The global frontier-based planning solves a Traveling Salesman Problem (TSP) to minimize the distance. The local planning attempts to minimize the path cost and the tether length using an adjustable decision function whose parameters play on the trade-off between these two values. The proposed method, TAPE, is evaluated through detailed simulation studies as well as field tests. On average, our method generates a 4.1% increase in distance traveled compared to the TSP solution without our local planner, with which the length of the tether remains below the maximum allowed value in 53% of the simulated cases against 100% with our method.

Integrating large language models into robotic systems holds promise for enhancing autonomy, yet practical deployment remains constrained by strict heartbeat-constrained scheduling and limited computational power. We propose AERIS: an edge deployment framework for aerial platforms. It organizes dedicated small language models combined with lightweight perception and control modules into roles that can be instantiated at runtime, and dynamically rebinds them across different executors as resources change, thereby pushing intelligent capabilities to the edge. AERIS achieves long-horizon instruction decomposition through an attention-subgoal alignment mechanism, which involves annotating the currently active instruction step in messages, thereby progressively approaching long-term objectives. We evaluate AERIS on a high-fidelity UAV Vision-and-Language Navigation benchmark. Under a heartbeat-timed execution mechanism, AERIS maintains a stable perception-decision-control loop between a low-frequency planner and a high-frequency controller, supporting real-time closed-loop operation. We further validate its deployability through two real-world experiments focused on planning and fast response. A demonstration video is provided in the supplementary materials.

Autonomous drone racing is a fundamentally challenging regime for autonomous aerial robots, requiring time-optimal control while operating under persistent actuation saturation. While reinforcement learning (RL) has achieved human-level performance in this domain, current methods fail to generalize; policies trained on specific environments often crash immediately in unseen configurations. This failure reflects the intrinsic difficulty of zero-shot generalization in agile flight, arising from high-dimensional task variation and the tight coupling between safety and performance at high speeds. Existing approaches that improve generalization impose a substantial cost on flight speed: control policies must significantly degrade performance to achieve even modest levels of generalization. In this work, we propose a framework for zero-shot generalization in agile flight for RL-based drone racing. By combining task-aware switching based on learning progress with a physically informed procedural track generator, the framework produces a fast and robust generalist policy without test-time adaptation. Our method achieves strong zero-shot performance across a wide range of unseen racetracks in the real world, demonstrating a 7.4x improvement in generalization over the state-of-the-art approaches, while maintaining competitive racing speeds. We validate our method's results in both simulation and real-world settings, including a challenging vision-based, end-to-end control setting that operates without explicit state estimation, where all prior approaches fail to generalize.

Tailless flapping-wing micro-aerial vehicles (FWMAVs) mimic the impressive flight performance of hummingbirds, utilising unsteady aerodynamic effects. However, existing designs are still limited and purpose-built with a restricted flight envelope and poor endurance. We therefore propose an adaptable tiltwing framework enabling bioinspired aerial robots to switch between hovering flight, high-speed directional flight, and energy-efficient gliding flight. The proposed framework utilises thrust vectoring with a wide actuation range via two fully independent propulsion units, each flapping a single wing, for effective control and enhanced manoeuvrability. For this, we developed a hybrid Scotch-yoke-based flapping mechanism that ensures a symmetric motion profile with a modular design guaranteeing an arbitrarily wide flapping angle to exploit the lift-enhancing clap-and-fling effect. Additionally, we implemented a passive wing-rotation mechanism, which, in combination with our dual-wing thrust-vectoring approach, allows unprecedented wing-design freedom, unlocking potential for precise optimisation. A contactless leading-edge tracking sensor provides accurate feedback on the wing's orientation and, in the gliding mode, enables dihedral-angle control, augmenting the active wing-pitch control. Extensive testing of a propulsion unit was conducted with a six-axis force/torque sensor, demonstrating the flapping mechanism's performance while optimising transmission efficiency and the passive wing-pitch mechanism. At full throttle, the average lift force generated by a single wing, flapping with a 188° amplitude, was 21.1 gf for a small 3.1 g 1S BLDC motor. Additional tests covering the full range of the wide-angle tilting capability showed an effective thrust-vectoring control architecture with a linear and symmetric response curve of the moments generated.

Aerial manipulation systems have long suffered from representation coupling in end-to-end control, as platform-level Unmanned Aerial Vehicle (UAV) movement and end-effector-level arm manipulation differ substantially in action scale, dynamics, and control objectives. In this paper, we propose AIR-VLA+, a flow matching action generation architecture specifically designed for aerial manipulation, featuring cascaded dual-action decoders and an asymmetric feature-level Mixture of Experts (MoE). We construct cascaded manipulation and movement decoders, allowing the UAV to unidirectionally observe the manipulator's intent during movement to achieve workflow coordination, while isolating the impact of UAV movement information backpropagation on arm manipulation stability. Addressing the characteristic that UAV movement is highly dependent on high-level semantics and responsible for task state transitions in aerial manipulation, we design an input feature enhancement module for the UAV movement decoder. This module introduces an implicit visual grasp projector to perceive the interaction state between the gripper and the object, and injects compressed global semantic features. Within the UAV movement decoder, we deploy an implicit MoE architecture, enabling different movement experts to spontaneously exhibit capacity inclinations for various task stages during training. Through dense soft blending computation on the feature manifold, the UAV movement is endowed with stronger task-stage adaptability. Experiments on the standardized AIR-VLA benchmark demonstrate that our method comprehensively surpasses all baselines with an overall average score of 48.0. The overall task completion score improves by 80.2% compared to the single-head $π_{0.5}$ policy, effectively mitigating the heterogeneous coordinated control conflicts of composite robots.

Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: https://github.com/SaxionMechatronics/aerial_micro_inspection

We present a generalist position control policy capable of controlling arbitrary multirotor configurations of a certain rotor count (e.g., hexarotors or quadrotors) with a single set of network weights. The policy is conditioned on a physics-grounded embodiment descriptor: a mass and inertia-normalized control allocation matrix that captures how mass-normalized motor thrusts generate linear and angular accelerations in the body-frame. To train the policy, we sample from a broad distribution of arbitrary multirotor configurations, including non-planar and asymmetric systems, and optimize a single, compact network using Proximal Policy Optimization. Training requires only five minutes on an RTX 3090 GPU using a custom NVIDIA Warp-based dynamics simulator. Through extensive simulation experiments, we show that embodiment conditioning enables robust generalist control across arbitrary morphologies. We demonstrate zero-shot real-world transfer of this generalist policy on three diverse hexarotor systems, including a planar robot, a partially symmetric non-planar system, and a random asymmetric, non-planar configuration.

Reliable wildlife monitoring is essential for ecology and conservation, yet many existing methods, such as tagging, capture, and close-range observation, can alter the very behaviors they aim to measure. Aerial robots offer a scalable alternative, which has shown promising performance in multiple studies. Nonetheless, existing approaches typically lack behavioral awareness, rely on fixed heuristics, or require real-world training data that are costly, impractical, and ethically difficult to obtain. As a result, there remains no general framework for adaptive drone-based monitoring that can both preserve ecological validity and scale across species, behaviors, and robotic platforms. In this study, we introduce a disturbance-aware reinforcement-learning-based framework for heterogeneous aerial robotic fleets that enables autonomous wildlife tracking while explicitly minimizing behavioral disruption. We couple a zoologically grounded simulation environment with fitted animal movement models derived from real trajectory statistics, and train control policies using a reward formulation that captures the trade-off between observation quality and disturbance risk. Across three species (pigeon, jackal, and spur-winged lapwing) with distinct ecologies and motion patterns and four increasingly strategic behavior models common in nature, the learned policies consistently surpassed currently used rule-based baselines and generalized across monitoring tasks, animal dynamics, and drone types. These results establish disturbance-aware learning as a viable foundation for non-invasive autonomous wildlife observation, opening a path towards scalable, ethically responsible, and scientifically reliable robotic monitoring in ecology and conservation.

Robotic simulators are a cornerstone of modern research in aerial robotics, serving both as a vehicle for the development of new control algorithms and as the data source for training reinforcement learning (RL) policies. Yet, existing quadcopter learning environments often face a trade-off between physical fidelity, multi-agent support, and the throughput required by modern deep RL pipelines. In this paper, we present MuJoCo-Drones-Gym, an open-source Gymnasium-compatible multi-drone environment built on top of the MuJoCo physics engine. MuJoCo-Drones-Gym supports an arbitrary number of Bitcraze Crazyflie 2.x nano-quadcopters and exposes a modular API for selecting (i)~the physics model (rigid-body MuJoCo, explicit Python dynamics, or any subset of ground effect, blade drag, and inter-drone downwash), (ii)~the action interface (per-motor RPMs, collective normalized thrust, velocity setpoints, or PID waypoint commands), and (iii)~the observation space (kinematic state vectors, RGB / depth / segmentation cameras, or neighbourhood adjacency information). A PettingZoo ParallelEnv wrapper enables drop-in multi-agent reinforcement learning, while a suite of seven task environments, hover, velocity tracking, multi-drone hover, waypoint navigation, formation flight, gate racing, and a generic multi-agent template, demonstrates the breadth of the interface. We describe the environment design, the underlying physics and quadcopter dynamics, and illustrate its use through control and learning examples that mirror those of the closely related gym-pybullet-drones project, while taking advantage of MuJoCo's improved contact handling, rendering, and parallelizability.

Navigation using a monocular camera is pivotal for autonomous operation on tiny aerial robots due to their perfect balance of versatility, cost and accuracy. In this paper, we introduce MinNav, a navigation stack based on optical flow and its uncertainty to fly through a scene with static and dynamic obstacles and unknown-shaped gaps without any prior knowledge of the scene components and/or their locations/ordering. We further improve success rate by using the activeness of the robot to move around in an exploratory way to find obstacles and navigate. We successfully evaluate and demonstrate the proposed approach in many real-world experiments in various environments with static and dynamic obstacles and unknown-shaped gaps with an overall success rate of 70%. To the best of our knowledge, this is the first solution to tackle all the aforementioned navigation cases without prior knowledge using a monocular camera. Our approach is on par in performance with depth based methods with factors of magnitude less computation required and can readily run onboard tiny aerial robots. The accompanying video, supplementary material, code and dataset can be found at https://pear.wpi.edu/research/minnav.html

This article presents the first real-world autonomous flight of a 5G-connected aerial robot controlled by an edge-offloaded controller, and aims to bridge the gap between controlled and factual setups. The robot operates within an active industrial subterranean mine, while the high-level controller is deployed in a nearby Kubernetes-based edge cluster. Communication between the robot and the edge is enabled via a 5G New Radio (NR) Standalone (SA) network. The chosen controller is a Model Predictive Controller (MPC), which generates control actions to allow the robot to navigate seamlessly through the mining environment. A human operator selects waypoints for the aerial robot, and the MPC generates smooth, collision-free paths for autonomous executions. The proposed 5G edge-based closed-loop system is evaluated in a real industrial setting and demonstrates the potential of edge-controlled robotic systems toward time-critical, safe and efficient future deployments.

In robotics systems, vast amounts of visual data are easily captured at high resolution using low-cost, low-power hardware. Yet, limited bandwidth and on-device compute resources prevent full utilization when transmitted via conventional codecs like JPEG/MPEG. Newer codecs, like AV1/AVIF, improve the rate-distortion trade-off, but demand far more resources for encoding, impractical without custom ASICs. Recent asymmetric autoencoders deliver high quality under extreme power and bandwidth constraints, but add prohibitive decoding cost and use bespoke formats that ignore decades of infrastructure built around standards like JPEG. To address these limitations, we introduce a compression framework for cloud robotics based on a Sensor Embedded Autoencoder paired with a One-Time Transcode for Efficient Reconstruction (SEAOTTER). Because the sensor, cloud, and consumer stages face very different power and bandwidth budgets, SEAOTTER combines the compactness of a learned latent with the broad usability of a standard JPEG file. Since naive transcoding degrades performance, we propose a learnable JPEG color and quantization transform that enables increased accuracy for global, dense, and vision-language-based perception. Using SEAOTTER, we train both general-purpose and task-aware transcoding pipelines for a pre-trained, frozen encoder. At a compression ratio of 200:1 and compared to AVIF, we observe 7 times faster encoding, 3.5 times faster decoding, and +8% ImageNet top-1 accuracy, while retaining compatibility with JPEG infrastructure. Our code is available at https://github.com/UT-SysML/seaotter .

Reliable autonomous UAV swarms in Search and Rescue (SAR) missions require fault-tolerant coordination capable of sustaining operations despite agent degradation. This paper introduces the Intelligent Replanning Drone Swarm (IRDS), a distributed coordination architecture designed for resource-constrained environments. The proposed framework employs a Reverse-Auction market mechanism where agents bid to service search sectors based on a distance-weighted cost function, coupled with a geometric consensus protocol for target verification. We evaluate the approach through physics-based simulations (N=8 agents, 8x8 grid) subjected to stochastic fault injection. Results indicate that the swarm autonomously reallocates tasks from failed agents with low latency relative to the total mission duration, maintaining a mission success rate of 93% under 25% workforce degradation. The proposed framework demonstrates a robust, empirically tested method for self-healing aerial robotic coordination.

Tropical forests worldwide are under intense deforestation pressure driven by economic and political interests, and scientific evidence suggests this deforestation contributes to climate change. This paper proposes a novel logging method for tropical forests, Ultra-Reduced-Impact-Encased-Logging (URIEL). This new method is based on heli-logging techniques combined with intensive use of robotics and AI integrated with post-harvest silvicultural treatments performed by drones. The concept of appropriate equipment for this method was developed, dimensions were determined, details were completed in a digital proof of concept, and an effective digital simulation and economic feasibility analysis were carried out for various helicopter-timber-distance combinations. The results demonstrated that a URIEL method has high economic viability and makes it possible to virtually eliminate collateral damage to forests while maintaining ecosystem services. The main conclusion of this paper is that, despite the satisfactory scientific and technological results, the feasibility of a Uriel method depends on the integration of stakeholders intrinsic to the context: high-tech industry; political governments; certified logging companies; and native populations.

Small aerial robots are particularly well-suited for search and rescue in confined and hazardous environments due to their agility, low cost, and ability to traverse through cluttered spaces that are inaccessible to larger platforms. However, enabling autonomous navigation in complete darkness remains a significant challenge, because small aerial robots cannot easily accommodate perception systems that demand substantial payload, power, or computation. In this work, we present a lightweight perception approach that combines a monocular event camera, a coded aperture lens, and an infrared dot projector to enable navigation in such conditions. The projected pattern, when imaged through the coded aperture, produces depth dependent blur signatures that implicitly encode scene geometry. We train a convolutional neural network to decode these signatures into dense depth maps using only synthetic data generated from a simple planar wall setup. Despite this minimal training regime, the model generalizes zero-shot to complex real-world scenes. Our system operates in real time at 20 Hz on a NVIDIA Jetson Orin Nano, demonstrating suitability for resource-constrained platforms. We further analyze the impact of different coded aperture designs on depth estimation performance. Our approach gives high accuracy (l1 error 7.0cm) upto 2.5m range (2.80% error). These results highlight the potential of combining structured illumination, coded optics, and event-based sensing for enabling robust perception and navigation in complete darkness.

The increasing use of drones in human-centric applications highlights the need for designs that can survive collisions and recover rapidly, minimizing risks to both humans and the environment. We present HoLoArm, a quadrotor with compliant arms inspired by the nodus structure of dragonfly wings. This design provides natural flexibility and resilience while preserving flight stability, which is further reinforced by the integration of a Reinforcement Learning (RL) control policy that enhances both recovery and hovering performance. Experimental results demonstrate that HoLoArm can passively deform in any direction, including axial one, and recover within 0.3-0.6 s depending on the direction and level of the impact. The drone can survive collisions at speeds up to 7.6 m/s and carry a 540 g payload while maintaining stable flight. This work contributes to the morphological design of soft aerial robots with high agility and reliable safety, enabling operation in cluttered and human shared environments, and lays the groundwork for future fully soft drones that integrate compliant structures with intelligent control.

While autonomous multi-robots can achieve safe and coordinated navigation, they often struggle to adapt to unforeseen conditions and to capture operator-driven objectives in unstructured environments. We present a Virtual Reality (VR)-based shared control framework for teams of drones operating in constrained and unknown environments, enabling real-time, user-guided exploration. At the core of our approach is a novel, user-guided motion-primitive-based planner that computes continuous, collision-free trajectories while continuously integrating operator input. This planner is coupled with an admittance controller, allowing the operator to flexibly influence team behavior and guide drones toward regions of interest that autonomous planners may overlook. The system supports mixed-reality operations with both physical and simulated drones, and implements a bilateral VR-based interface, allowing the operator to guide the robot team via migration points while receiving immediate visual feedback of the team state. Experimental results show that shared control improves obstacle avoidance, maintains inter-agent spacing, and reduces operator effort, demonstrating the feasibility and advantages of immersive, human-in-the-loop multi-robot navigation.

Multirotor aerial robots excel at maneuvering in three-dimensional space, and recent advances enable nimble navigation in cluttered and confined environments, especially for small airframes. By contrast, platforms built for high-altitude work tend to be larger to deliver high thrust for stable physical interaction with the environment. However, these conflicting design requirements create a long-standing trade-off between nimble navigation and robust aerial manipulation. Here, we present LEGION units, which are reconfigurable modular aerial robots capable of in-flight self-assembly for cooperative manipulation, drawing inspiration from the self-organized collectives formed by ants. Each unit retains nimble maneuverability while joint-equipped docking interfaces at both ends enable end-to-end self-assembly into a flying manipulator. We show that multiple units autonomously dock in flight; once latched, they maintain a zero-clearance interlock by controlling the contact force and torque, enabling reliable aggregation and articulated motion even outdoors. We further show that self-reconfigurability enables morphological switching between nimble individual flight and collective articulated manipulation, while realizing core in-flight manipulation primitives including pushing, pulling, rotating, grasping, and carrying. LEGION's self-organization enables aerial robots, especially in swarms, to shift from passive observers to active participants in their environment, broadening the scope of aerial physical interaction.

Optimization problems with drones are widely studied in a variety of civilian tasks, mainly due to their ability to traverse rough terrains and to carry cameras and other sensors for surveillance tasks. The limited battery life of these aerial robots poses challenges in operational research. In this paper, we address the following optimization problem. We are given a set of line segments (e.g. tubes in a solar plant) to inspect by drones. The objective is to detect broken pipes using artificial intelligence and path planning must be carried out efficiently. On the one hand, the limited capacity of the batteries necessitates periodic visits (tours) to a fixed base station. However, it is desirable to allocate a set of tours for each drone to ensure that the segments are covered as quickly as possible, aiming to minimize the makespan, which is the maximum time spent by any drone. We are able to prove that this optimization problem is strongly NP-hard even when the segments are positioned on a line and the scenario involves only two drones. Then, approximation algorithms are proposed. Our computational experiments demonstrate that the proposed algorithm achieves near-optimal performance across diverse operational scenarios.

Due to the system's scale and complex fabrication, the model describing the dynamics of a flapping-wing insect-scale aerial robot is subject to parameter uncertainty; for example, in the inertia matrix and the actuator mapping of the flier. Furthermore, due to its low inertia, this type of robot is greatly affected by stochastic and systematic disturbances during flight, including power-wire tension, gusts, and undesired aerodynamic forces produced by wing misalignment. Therefore, the high-performance execution of complex maneuvers at the subdecigram scale requires the robot to adapt its behavior to counteract disturbances and model uncertainty. Toward this objective, we introduce a model-reference adaptive control (MRAC) architecture for high-performance position control of flapping-wing robotic insects that can be modeled as rigid bodies in the three-dimensional (3D) space. In addition, we demonstrate how the implementation of a hybrid multiplicative extended Kálmán filter for estimating current and desired angular velocities during flight significantly dampens attitude vibrations, especially along the roll and pitch degrees of freedom (DOFs), and also improves flight performance. To show the suitability, functionality, and high performance of the proposed approach, we conducted real-time hovering and trajectory-tracking 6-DOF flight control experiments with a 95-mg insect-scale aerial robot.

The interaction of robots with bendable objects in midair presents significant challenges in control, often resulting in performance degradation and potential crashes, especially for aerial robots due to their limited actuation capabilities and constant need to remain airborne. This paper presents an adaptive controller that enables two aerial vehicles to collaboratively follow a trajectory while transporting a bendable object without relying on explicit elasticity models. Our method allows on-the-fly adaptation to the object's unknown deformable properties, ensuring stability and performance in trajectory-tracking tasks. We use Lyapunov analysis to demonstrate that our adaptive controller is asymptotically stable. Our method is evaluated through hardware experiments in various scenarios, demonstrating the capabilities of using multirotor aerial vehicles to handle bendable objects.

Heterogeneous air-ground robot teams combine complementary sensing modalities, mobility characteristics, and spatial viewpoints that can significantly enhance perception in complex outdoor environments. However, progress in multi-robot collaborative perception has been constrained by the lack of real-world datasets featuring overlapping multi-modal observations from platforms operating in unstructured terrain. We present GA3T (Ground-Aerial Team for Terrain Traversal), a real-world multi-robot collaborative perception dataset collected using a Clearpath Husky UGV and an Autel EVOII UAV across diverse unstructured environments, including forest trails, rocky paths, muddy terrain, snow piles, and grass-covered fields. The ground platform provides 3D LiDAR, stereo camera, IMU, and GPS data, while the aerial platform contributes RGB imagery, thermal/infrared observations, and GPS from a complementary overhead viewpoint, allowing for rich cross-modal and cross-view perception. The dataset is collected in 4 unique environments, with over 13,000 synchronized frames across approximately 29 minutes of operation, and includes both SAM3-based zero-shot segmentation and over 8,000 manually labeled images. A unique aspect of the dataset is its early-spring collection period, during which sparse tree canopies allow the aerial robot to partially observe the ground robot and terrain through the trees, allowing for occlusion-aware collaborative perception. Unlike prior multi-robot datasets that focus on SLAM or simulated cooperative driving, GA3T is specifically designed to support research on cross-view perception, air-ground viewpoint fusion, traversability estimation, and collaborative scene understanding in real off-road environments.

This work presents a simulation-based comparative robustness analysis of Incremental Nonlinear Dynamic Inversion (INDI) and Nonlinear Dynamic Inversion augmented with a nonlinear disturbance observer (NDI+NDO) for fully actuated aerial robots. A systematic simulation campaign across representative operating scenarios is conducted, where we compare tracking performance, robustness, control effort, under parametric variations, external disturbances, and measurement noise. Results show that INDI demonstrates stronger robustness in several model-mismatch and combined-stress cases, while NDI+NDO primarily matches nominal performance but exhibits greater sensitivity under several non-ideal conditions. These findings provide practical guidance on the relative strengths and limitations of incremental and observer-based inversion strategies for aerial robotic applications.

Autonomous fixed-wing flight is becoming a key capability in aerial robotics, enabling sensing, mobility, and contingency operations across both small-scale Uncrewed Aircraft Systems and large-scale Advanced Air Mobility. During unpowered operation in fixed-wing platforms, airspeed is regulated solely through potential-kinetic energy exchange, making airspeed dynamics highly sensitive to guidance commands, particularly under wind. This paper presents a viability-based airspeed protection for ground-referenced guidance in steady wind, where airspeed evolution depends explicitly on the commanded flight path angle. Leveraging Nagumo's tangency condition, we derive a closed-form, wind-dependent characterization of admissible guidance commands that guarantees forward invariance of a safe airspeed envelope. These conditions are embedded within an offline quadratic programming framework to certify airspeed-safe maneuver primitives for non-ascending flight at the guidance level. The approach is validated using a high-fidelity unpowered fixed-wing aircraft model on gliding trajectories formed by concatenating certified maneuver primitives, demonstrating strict airspeed boundedness. Future work will address unsteady wind fields and flight experiments.

Data-driven Model Predictive Control (MPC) has lately been the core research subject in the field of control theory. The combination of an optimal control framework with deep learning paradigms opens up the possibility to accurately track control tasks without the need for complex analytical models. However, the system dynamics are often nuanced and the neural model lacks the potential to understand physical properties such as inertia and conservation of energy. In this work, we propose a novel energy-based regularization loss function which is applied to the training of a neural model that learns the residual dynamics of an omnidirectional aerial robot. Our energy-based regularization encourages the neural network to cause control corrections that stabilize the energy of the system. The residual dynamics are integrated into the MPC framework and improve the positional mean absolute error (MAE) over three real-world experiments by 23% compared to an analytical MPC. We also compare our method to a standard neural MPC implementation without regularization and primarily achieve a significantly increased flight stability implicitly due to the energy regularization and up to 15% lower MAE. Our code is available under: https://github.com/johanneskbl/jsk_aerial_robot/tree/develop/neural_MPC.

Autonomous robotic systems are increasingly deployed for mapping, monitoring, and inspection in complex and unstructured environments. However, most existing path planning approaches remain domain-specific (i.e., in the air, on land, or at sea), limiting their scalability and cross-platform applicability. This article presents OmniPlanner, a unified planning framework for autonomous exploration and inspection across aerial, ground, and underwater robots. The method integrates volumetric exploration and viewpoint-based inspection, alongside target reach behaviors within a single modular architecture, complemented by a platform abstraction layer that captures morphology-specific sensing, traversability and motion constraints. This enables the same planning strategy to generalize across distinct mobility domains with minimal retuning. The framework is validated through extensive simulation studies and field deployments in underground mines, industrial facilities, forests, submarine bunkers, and structured outdoor environments. Across these diverse scenarios, OmniPlanner demonstrates robust performance, consistent cross-domain generalization, and improved exploration and inspection efficiency compared to representative state-of-the-art baselines. Videos presenting the OmniPlanner framework and demonstrating its field deployments across aerial, ground, and underwater robots are available at https://ntnu-arl.github.io/omniplanner, and the source code is publicly available at https://github.com/ntnu-arl/gbplanner_ros/tree/gbplanner3.

Object-Goal Navigation (ObjectNav) requires an agent to autonomously explore an unknown environment and navigate toward target objects specified by a semantic label. While prior work has primarily studied zero-shot ObjectNav under 2D locomotion, extending it to aerial platforms with 3D locomotion capability remains underexplored. Aerial robots offer superior maneuverability and search efficiency, but also introduce new challenges in spatial perception, dynamic control, and safety assurance. In this paper, we propose AION for vision-based aerial ObjectNav without relying on external localization or global maps. AION is an end-to-end dual-policy reinforcement learning (RL) framework that decouples exploration and goal-reaching behaviors into two specialized policies. We evaluate AION on the AI2-THOR benchmark and further assess its real-time performance in IsaacSim using high-fidelity drone models. Experimental results show that AION achieves superior performance across comprehensive evaluation metrics in exploration, navigation efficiency, and safety. The project is available at https://github.com/Zichen-Yan/AION.

Tiny flying robots hold great potential for search-and-rescue, safety inspections, and environmental monitoring, but their small size and limited computational resources constrain onboard sensing capabilities. Inspired by animals such as rats and moles, which rely on lightweight whiskers to navigate and perceive their surroundings through touch, we present a 3.2-gram whisker-based tactile sensing apparatus that enables tiny drones to perceive and interact with their environment through gentle physical contact, even in complete darkness. The apparatus employs barometers at the base of each whisker to estimate contact depth, enabling obstacle localization while minimizing contact-induced destabilization. To compensate for sensor noise and drift during sustained contact, we develop a tactile depth estimation pipeline that achieves millimeter-scale depth estimation accuracy. Together, these innovations enable tiny drones to autonomously avoid obstacles, contour surfaces, and explore confined spaces, guided by onboard tactile sensing across both rigid and soft environments. Running entirely onboard a microcontroller with just 192 KB of memory, our system demonstrates autonomous tactile flight across various scenarios. This bio-inspired approach extends perception for mobile robots beyond vision, opening new possibilities for autonomous operations in visually degraded and GPS-denied environments.

How to endow aerial robots with the ability to operate in close proximity remains an open problem. The core challenges lie in the propulsion system's dual-task requirement: generating manipulation forces while simultaneously counteracting gravity. These competing demands create dynamic coupling effects during physical interactions. Furthermore, rotor-induced airflow disturbances critically undermine operational reliability. Although fully-actuated unmanned aerial vehicles (UAVs) alleviate dynamic coupling effects via six-degree-of-freedom (6-DoF) force-torque decoupling, existing implementations fail to address the aerodynamic interference between drones and environments. They also suffer from oversized designs, which compromise maneuverability and limit their applications in various operational scenarios. To address these limitations, we present FLOAT Drone (FuLly-actuated cOaxial Aerial roboT), a novel fully-actuated UAV featuring two key structural innovations. By integrating control surfaces into fully-actuated systems for the first time, we significantly suppress lateral airflow disturbances during operations. Furthermore, a coaxial dual-rotor configuration enables a compact size while maintaining high hovering efficiency. Through dynamic modeling, we have developed hierarchical position and attitude controllers that support both fully-actuated and underactuated modes. Experimental validation through comprehensive real-world experiments confirms the system's functional capabilities in close-proximity operations.